Ll Engineering Pc Senior Jobs in Usa

Please note that this opportunity is contingent on program funding.  Start dates are determined after funding confirmation.

Northrop Grumman Aeronautics Systems sector is hiring a Senior Principal Guidance Navigation and Controls Engineer to join our Vehicle Engineering team of qualified, diverse individuals in Melbourne, Florida.

Responsibilities may include:

• Lead the Guidance, Navigation, and Control system engineering requirement maturation
• Lead the integration of autopilot and auto throttle capabilities into the Vehicle Management System
• Lead subsystem level certification activities

Basic Qualifications

• Bachelor of Science (BS) in a Science, Technology, Engineering, or Mathematics (STEM) discipline and 8 years of relevant experience; OR Master of Science (MS) in a STEM discipline and 6 years of relevant experience
• Your ability to transfer and maintain the final adjudicated government Secret clearance (DoD must be in-scope or enrolled in Continuous Evaluation) and any program access(es) required for the position within a reasonable period of time, as determined by the Company.
• Knowledge of fixed-wing aircraft dynamics
• Knowledge of fly-by-wire control systems
• Experience in system engineering requirement definition, verification, and validation
• Experience analyzing non-linear simulations of aircraft closed-loop responses
• Experience creating certification test procedures and test cases
• Working knowledge of autopilot and autothrottle capabilities into Vehicle Management Systems
• Working knowledge of Flight Management Systems, including RNAV
• Experience using MATLAB to create, process, analyze, and visually represent data.
• Experience using Simulink to model dynamic systems.
• Experience using Model Based System Engineering tools
• Familiarity with programming (C/C++, Python)

Preferred Qualifications

• Experience developing and integrating autopilot and autothrottle capabilities into Vehicle Management Systems
• Experience with Flight Management Systems, including RNAV
• Experience using CAMEO to create system requirement models
• Experience using System Composer to create software architecture
• Experience with MIL-STD-1797B
• Experience with AS94900 or MIL-STD-9490
• Experience with DO-178C
• Experience for Atlassian tool suite (Jira, Confluence, Bitbucket)

#AS-FA3

Northrop Grumman’s Space Sector is seeking a Senior Staff Systems Engineer to serve as an Engineering lead for a space mission payload critical to our nation to join our team in Dulles, VA. This position is 100% onsite and cannot accommodate telecommute work.

This role includes Engineering and project management through all phases of the program, from concept development and industry trade study preliminary and detailed design, payload integration & test, space vehicle integration and test and potentially on-orbit demonstration.

This position will work a 9/80 schedule, with every other Friday off.

Your mission, should you choose to accept:

• Functioning as the primary payload interface for customers, program management, product line engineering leadership, mission assurance and subsystem engineering teams
• Providing Technical Support / Oversight including
  • Conducting technical trades in coordination with the Mission and Space Vehicle SE teams
  • Ownership of payload specs and requirements traceability 
  • Developing and managing Interface-Control Documents (ICD) between the prime and sub-contractor
  • Playing a key role in major program milestone and readiness reviews
  • Planning, design, and execution of testing strategies to ensure payload qualification, exercise payload functionality and measure performance
  • Supporting the development of operational mission scenarios and payload concepts of operations

• Payload sub-contractor oversight, including cost and schedule performance including
  • Review / Tech Eval of subcontractor proposals
  • Cost account manager (CAM) for Payload WBSs using EVMS
  • Recognizing and mitigating payload related issues and risks

If this job description reads like it was written specifically for you, consider joining our team!

This position is contingent upon the candidate obtaining final clearances and program access(es) within a reasonable period of time as determined by the company.

Basic Qualifications:

• Bachelor’s degree with 14 years of professional experience – OR – Master’s degree with 12 years of professional experience – OR – PhD with 10 years of professional experience
• Requires an active Top-Secret/Sensitive Compartmented Information (SCI) clearance at time of application
• Experience working medium size or larger Government programs
• Experience in managing sub-contractors
• Knowledge of aerospace environmental testing standards
• Experience with spacecraft design, development integration and test
• Experience with payload integration inclusive of ICD development

 Preferred Qualifications:  

• 15+ yrs of direct experience with Space systems
• Established network of contacts in other NG divisions/sectors/programs
• Proposal experience
• CAM experience

Curious about all the exciting developments with the Northrop Grumman Space Sector? Click the link below:

NOVASPACE

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Senior Flight Test Engineer at Reliable Robotics, you will be a part of the Flight Test and Integration team. The Flight Test and Integration team is responsible for multiple installation and test efforts at Reliable Robotics. The team regularly ensures the proper function of mechanical, electrical, and flight control systems onboard the aircraft. In addition, this team has ownership over all ground and flight test operations within the organization. The team is composed of individuals with experience developing experimental and certification products.

Responsibilities

In your role as Senior Flight Test Engineer, you will verify the function and capabilities of modified flight control systems, for a remotely operated autoflight system. You will ensure the proper build-up of functions and capabilities, beginning in the lab and ending up on the vehicle. You will be expected to verify the end-to-end functionality of the system and ensure the ability to assess all desired test requirements. This will require engaging with many teams throughout the organization and having a firm understanding of the vehicle's capabilities. As part of the flight test campaigns, you'll act as the responsible engineer for the vehicle and often as test director.

Basic Success Criteria

• Bachelor's Degree of Science or Engineering in Mechanical, Electrical, Aerospace, or related discipline

• 7+ years of experimental flight test experience

• Prior experience drafting test plans, test cards, test hazard analyses, and acting as test director during a flight/mission

• Experience with making aeronautical VHF radio calls

• Demonstrated ability to complete system-level risk assessments

Preferred Criteria

• Graduate of an SETP recognized flight test school

• Bachelor's degree or higher in an engineering or science discipline or equivalent industry experience

• Recent Caravan or PT6A experience

• Diversity of experience in multiple aircraft/ airframes

• CFII or military flight instructor

• Experience with automated and/or large remotely operated vehicles (UAS, spacecraft, etc)

• Experience working in a Flight Test program focused on Certification

• Experience in developing flight procedures, training curricula, and safety management systems

• Experience flying for a 14 CFR part 135 or 121 Air Carrier

• Deep understanding of FAA certification processes and their implementation

• In depth knowledge of systems engineering processes and principles

• Basic familiarity with software programming principles

Must be willing to travel up to 10% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $190K - $260K

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Harness Engineer at Reliable Robotics, you will be a part of the Vehicle Design and Integration team and will report to the Vehicle Design and Integration Engineering Manager. This team is a small group of highly motivated engineers designing, integrating, testing, and flying advanced mechanical and electrical systems. The harness engineer is a very cross-functional role at the convergence of the avionics, mechanical, integration, and production teams, with significant hands-on work designing, building, integrating, and testing our harnesses, enclosures, and mounting hardware; expect to broaden your design and application experience. This position can be filled locally or hybrid with frequent travel to our facility in Mountain View, California.

Responsibilities

In your role as Sr. Harness Engineer you will work with the avionics, mechanical, and integration teams to define the harness architecture, including routing, bulkhead planning, and manufacturing and integration processes. You'll be responsible for the detailed design of both flight and test harnesses, and you'll be working with the production technicians and A&Ps to get the harnesses built and installed on the aircraft. You'll have the opportunity to design, install, and test your hardware on a remotely operated aircraft, and you'll be an instrumental part of how our hardware teams come together on the airplane.

Basic Success Criteria

• BS in Mechanical Engineering, Electrical Engineering, or equivalent industry experience

• 5+ years experience in electrical harness design

• Ability to route harnessing (both in CAD and physically in the airplane) in a strategic manner

• Experience defining routing and bulkhead requirements

• Experience working with connectors, backshells, EMI shielding, and cable/wire protection methods

• A love of spatial packaging

• Be logical, inquisitive, and eager to both teach and learn

Preferred Criteria

• 8+ years experience in harness design and avionics packaging

• Experience performing design trades for and detail design of aerospace flight harnesses

• Experience with NX routing and Capital Harness Designer

• Experience working with safety critical hardware

• Experience working on certification-path aviation development projects

• Experience testing hardware to DO-160 requirements

We're a growing, motivated, fast-paced team of aviation professionals. We move quickly, and everyone wears multiple hats. We're looking for someone who is diligent and detail-oriented who can join our team and make an immediate impact.

The position will be located at our facility in Mountain View, California.

Must be willing to travel up to 10% of the time.

The estimated salary range for this position is $180,000 to $260,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.

In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $180K - $260K

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Quality Assurance and Reliability Engineer, you'll be a part of the Production organization. You'll bring the technical leadership required to verify product safety and reliability, lead investigations, identify and implement corrective actions, and ensure improvements are implemented. This is a small but growing team of highly motivated people who are passionate about delivering quality products and services with velocity and unquestionable value. You will be responsible for the strategy and execution of the quality management system, risk mitigation, risk prevention, design reliability, hardware reliability, flight reliability, test validation, and production optimization. As Reliable Robotics continues to grow and scale, you'll be responsible for increasing the velocity of the business, maturing processes, and building automations to enable company success. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes automated aviation systems from prototype to production in a hands-on environment.

Responsibilities

• Work with the design, manufacturing, test, and flight teams to produce reliable products, ensure compliance, and drive continuous improvement across the business. You'll have the opportunity to work directly with flight hardware in the factory and on the plane, run investigations and containment on safety-critical products, and watch your processes build the first certifiable autonomous aircraft.

• Partner with design, manufacturing, and test teams through product development, acceptance testing, and quality checkouts to create reliable hardware verification for flight components and systems, including identification of key operating characteristics, prototype development testing for functionality and manufacturability, flight and prototype planning development, and collation of test anomalies and lessons learned.

• Develop and manage the quality management system to ensure compliance with processes, work instructions, certifications, and regulatory requirements.

• Investigate anomalies in manufacturing, supply chain, testing, and flight, identifying and mitigating the immediate and underlying root causes to manage risk and improve the reliability of designs and processes.

• Support the development, manufacturing, and verification of products using continuous improvement and statistical techniques.

• Develop, implement, and validate test and inspection methodologies for new and existing products, ensuring objective criteria are consistently met and quality goals are met.

• Derive, automate, and report quality metrics to the business and provide recommendations for design, product, and process improvements.

Basic Success Criteria

• Bachelor's Degree in Mechanical Engineering, Electrical Engineering, Aerospace, Software Engineering, or a similar advanced degree

• 7+ years of professional experience in design engineering, manufacturing, test, software, or quality and reliability engineering

• 2+ years of professional experience with investigations, design of experiments, and other investigatory and problem-solving methods

• Experience with quality, risk, and/or safety management systems and processes

Preferred Criteria

• 2+ years of experience with Federal Aviation Administration (FAA) regulatory requirements (e.g., 14 CFR 21, DO-160, D0-254, etc.)

• 2+ years of programming experience in Python, C, or SQL with an emphasis on data analysis and automation

• Experience evaluating, defining, strategizing, and executing test campaigns and procedures

• Experience developing engineering infrastructure and tools in support of the Quality Management System (QMS)

• Excellent written and verbal communication skills

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Mountain View, California. Must be willing to travel up to 20% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $165K - $220K

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Purpose and Function:
The Sr. Engineer, R&D Testing and Validation position provides skilled technical insight to enable final product design by building product testing plans, testing prototypes and providing analysis aligned with global product qualification requirements.

In addition, the Getinge Aseptic Solution (GAS) Engineer, works with other internal and external team members to ensure timely and quality testing and data analysis in support of all product commercialization efforts. This is a hands-on position that requires a strong mechanical engineering background.

Key Duties and Responsibilities:
The responsibilities include but are not limited to:

• 
  
• Responsible for completing all R&D protocol generation, test execution, and protocol event reporting.
  
• Lead and complete Design Verification and Validation test planning, execution, interpretation, and reporting.
  
• Design, conduct, and interpret experiments to support all GAS products and technologies, including aseptic Connectors, Fillers, and Filler-related consumable product development, evaluation, and verification.
  

• 
  
• Apply scientific and technical test acumen toward the development of new test methodologies and improvement of existing methodologies, as well execution of test method validations.
  

• 
  
• Provide technical oversight and leadership on matters regarding device testing for all product groups to include R&D Engineering, Quality, Manufacturing/Production, and Regulatory.
  

• 
  
• Identify areas of improvement for test methods by staying current with best practices.
  
• Coach and mentor laboratory technicians or other technical personnel as required.
  
• Coordinate and run project meetings as needed.
  
• Contributes to team effort by accomplishing related duties as requested, such as a Subject Matter Expert to departments outside of business area of primary responsibility.
  

• 
  
• Develop budget and justification for new equipment and upgrades to existing equipment.
  
• Design and execute equipment qualification plans.
  
• Lead special projects as needed.
  
• Perform other projects and duties as assigned by the Program Manager for the overall benefit of the organization
  

Required Skills and Abilities:

• 
  
• Ability to work independently and perform all necessary testing procedures in a timely manner
  
• Excellent problem solving and analytical skills
  
• Excellent organizational and planning skills with a solid attention to detail
  
• Effective communication skills and excellent interpersonal skills
  
• Open and collaborative working style; must be comfortable working in an environment where ideas are shared
  
• and challenged
  
• Ability to stay focused on the requirements of the customer and process controls
  
• Being accountable and willing to hold others accountable
  

Education and Experience:

• 
  
• Bachelor's degree in mechanical engineering, biomedical engineering, or similar technical discipline required
  
• Minimum of 5 years of experience testing and validation of new products in development
  
• Excellent mechanical aptitude or skill such as working knowledge of pumps, motors, valves, materials, etc. to be able to assemble machine components, troubleshoot, repair and calibrate equipment
  

• 
  
• Knowledge of microfluidics and interaction with mechanical forces
  
• Basic math (algebra) skills
  
• Proficient in Microsoft Office
  

Physical Requirements:

• 
  
• Employee is required to sit, stand, walk, and move around the facilities to include the lab/testing areas
  
• Must be able to use a variety of equipment to complete tasks
  
• May be exposed to moving mechanical parts and areas where electrical current is present
  
• Must be able to lift up to 30 pounds
  
• Must travel as required to customer sites, training events, trade shows, etc.
  
• Estimated domestic and international travel of up to 20%
  

Salary range: $106,000 - $133,000 depending upon experience + 10% bonus target.

#LI-LG1

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

Avantor is seeking a Sr. Manufacturing Engineering Technician to be responsible for activities relating to the daily production engineering release process for single use products.

This includes: generation of production protocols, process and quality improvement, production flow and standard work development, process definition, and documentation. This person will also ensure the assembly meets the performance criteria required by the customer.

This is a full-time position that will be based out of our Devens, MA office and will work closely with the operations, quality, and design engineering teams.

What we're looking for:

• Education:
• Minimum of a high school diploma or equivalent degree with experience in technical writing.
• Experience:
• Minimum of 3-5 years of direct floor support experience or assembly experience desired.
• Additional Qualifications:
• Familiarity with operating in an ISO-9000, cGMP and Lean Manufacturing environment preferred.
• Computer literacy is required. (MS Word, Excel & PP)
• Familiarity with FDA documentation preferred.
• Ability to define and develop single piece flow production methods in support of single use sterile assemblies.
• Ability to read and work with technical drawings and translate into documents for production use.

How you will thrive and create an impact:

• Responsible for daily production support to generate production protocols, creation of standard work documents, and process fixture.
• Assist in resolving customer complaints in a timely manner; notify management of problems and suggest corrective actions.
• Lead & assist with process development and improvement activities.
• Support the implementation and validation of process and product documentation.
• Develop and implement various tooling and fixturing to meet the needs of the manufacturing department
• Support and implement preventative maintenance and calibration programs.
• Understand and support company operating procedures to provide proper and effective service to all customers and foster the development of long term business relationships.
• Perform other duties as assigned.

The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer.

Why Avantor?

Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science.

The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor.

We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today!

Pay Transparency:

The expected pre-tax pay for this position is

Actual pay may differ depending on relevant factors such as prior experience and geographic location.

EEO Statement:

We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law.

If you need a reasonable accommodation for any part of the employment process, please contact us by email at let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address.

For more information about equal employment opportunity protections, please view the Know Your Rights poster.

3rd Party Non-Solicitation Policy:

By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Defense, Space & Security (BDS) is seeking a Senior Systems Health & Integrated Diagnostics Engineer (Level 5) to join the Reliability, Maintainability & System Health team in Berkeley, MO.

You will lead the development, integration, verification, and delivery of System Health models and comprehensive health-management capabilities that ensure safe and reliable mission execution. This role encompasses systems engineering, RAM (reliability, availability, and maintainability) modeling, supplier collaboration, and cross-disciplinary leadership.

Position Responsibilities

• Lead the technical team to design, develop, test, and deliver Integrated Health Management (IHM) and System Health models using Reliability, Availability, Maintainability & Cost (RAMC) tools and best practices.
• Translate customer requirements into compliant system-level health architectures and verification plans.
• Drive systems-of-systems trades and analyses to optimize system health, reliability, maintainability, availability and lifecycle cost.
• Coordinate and verify supplier deliverables (models, test evidence, requirements traceability) and lead supplier technical reviews.
• Collaborate closely with hardware, software, diagnostics, and avionics integration teams to ensure consistent system health implementation.
• Define, manage and validate requirements; create and maintain requirements traceability, risk and opportunity registers, and test strategies.
• Plan and execute validation & verification (V&V) activities for internal, supplier, and contract/product specifications.
• Provide subject matter expertise and technical support to MQ-25 and other Air Dominance programs on health management topics.
• Mentor and develop team members; communicate technical progress and risks to program leadership and customers.

Travel may be required up to 10% of the time; Domestically and/or internationally depending on business needs.

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required

Basic Qualifications (Required Skills/Experience)

• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (including manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
• 14+ years related work experience or an equivalent combination of technical education and experience
• 3+ years’ experience with cross-functional leadership, collaborative problem solving, building lasting relationships & proficiency in written and verbal communication

Preferred Qualifications (Desired Skills/Experience)

• Hands-on experience with health modeling and integrated diagnostics approaches and tools.
• Strong systems engineering skills: requirements development/management, V&V, and trades analysis.
• Direct aircraft maintenance or sustainment experience.
• Familiarity with RAMC toolset and related reliability modeling packages.
• Experience with FMECA (Failure Modes, Effects & Criticality Analysis).
• Demonstrated experience in Reliability, Maintainability, and System Health engineering.

Conflict of Interest

Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Employee Referral

Referral to this job is eligible for bonus to qualifying candidates.

Total Rewards

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $164,900 – $223,100

Applications for this position will be accepted until Apr. 01, 2026

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Top Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Innosight is a global strategy consulting firm focused on helping leading organizations design and create the future. We work with them to develop growth strategies, build innovation capabilities, and accelerate new growth initiatives. As a member of the Innosight team, you'll have the opportunity to work with leaders at Global 1000 companies to tackle some of the most interesting challenges in business.

We are the leading practitioners of disruptive innovation, building on the work of our co-founder, Harvard Business School professor Clay Christensen. Because we focus on growth strategy and innovation, we bring unique expertise and authority to the challenges our clients face: Where is our next big opportunity, and what is our strategy to get there? How do we build an organization that is innovative and future focused? How do we disrupt ourselves before others do?

Our values including humility, collaboration, transparency, and intellectual curiosity guide our work with clients, with each other, and our commitment to enabling innovation in organizations. Our work environment emphasizes the exchange of ideas, continuous learning, and collaboration. And our smaller team structure offers exposure to senior-level executives early in your consulting career.

Healthcare organizations must stay ahead of disruption by making data-driven decisions that accelerate transformation. Innosight thoroughly examines the intricate patient care challenges encountered by payor and provider healthcare entities to stabilize business today and create tomorrow's growth engine. As trusted strategic partners to CEOs and C-Suites, we help drive the healthcare industry forward by designing innovative enterprise-level long-term plans and partnerships for the world's leading healthcare organizations.

Innosight is seeking a Senior Associate to join our consulting team. Senior Associates play a critical role in driving client impactpartnering closely with Project Managers and case teams to structure work, guide problem-solving, and deliver high-quality results. You will take on increasing managerial responsibilities, independently own complex workstreams, and help shape client recommendations and project storylines. The ideal candidate brings strong strategic thinking, a collaborative and entrepreneurial mindset, and a commitment to developing both client insights and junior team members.

• Support Project Leadership: Work closely with case teams and project managers to drive team thinking, work activities, and deliverables.
• Workstream Ownership: Independently own and manage one or more workstreams, including problem structuring, developing detailed work plans, overseeing analysis, and driving results.
• Guide Problem Solving: Form hypotheses, break down complex problems, prioritize key analyses, and manage timelines to deliver impact.
• Deliver Client-Ready Results: Prepare high-quality deliverables, including clear analyses, compelling presentations, and actionable insights.
• Client Interaction: Facilitate brainstorming and client training sessions; present findings and recommendations to clients and senior executives.
• Business & Firm Development: Lead and advance intellectual property development and consulting offerings; contribute to internal initiatives and business development.
• Mentor Junior Talent: Support the professional development of junior employees, fostering a collaborative and high-performing team environment.
• Leverage Innovation Tools: Apply Innosight IP and emerging technologies, including generative AI, to inform and enhance recommendations.

• Minimum of 5 years of management consulting experience required, preferably in strategy (e.g., growth strategy, market entry, M&A, corporate strategy and transformation, or business model innovation).
• Strong interest in or prior experience with the healthcare provider industry (e.g., hospitals, health systems), including leading or contributing to strategy, growth, or innovation projects.
• Demonstrated experience independently owning significant workstreams and interacting directly with clients and senior executives.
• Proven ability to structure and solve ambiguous, complex problems using logic, creativity, and data-driven approaches.
• Demonstrated capacity to manage workstream planning, guide analysis, and lead or mentor junior team members.
• Excellent written and oral communication skills, with the ability to influence senior-level audiences.
• Bachelor of Science (BS) or Bachelor of Arts (BA), or another advanced degree is required.
• Advanced proficiency in PowerPoint and Excel; strong capability in producing client-ready deliverables.
• Familiarity with generative AI concepts and tools; experience applying them to client or analytical work is a strong plus.
• Self-starter who thrives in both structured and unstructured, highly collaborative environments.
• Travel and Home Office: Travel requirements vary by project, but candidates must be willing to travel weekly (up to 80%). You may live anywhere in the contiguous 48 states near a major airport.

The estimated base salary range for this job is $165,000 - $200,000. The range represents a good faith estimate of the range that Innosight reasonably expects to pay for this job at the time of the job posting. The actual salary paid to an individual will vary based on multiple factors, including but not limited to specific skills or certifications, years of experience, market changes, and required travel. This job is also eligible to participate in Innosight's annual incentive compensation program, which reflects Innosight's pay for performance philosophy. Inclusive of annual incentive compensation opportunity, the total estimated compensation range for this job is $206,250 - $250,000. The job is also eligible to participate in Innosight's benefit plans which include medical, dental and vision coverage and other wellness programs. The salary range information provided is in accordance with applicable state and local laws regarding salary transparency that are currently in effect and may be implemented in the future.

United States of America

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The F-22 Raptor Team is seeking a Senior Design and Analysis Engineer in Berkeley, MO or Richardson, TX to join the F-22 Raptor Mission Design and Analysis Team with a focus on developing cutting edge engineering solutions to continue to advance the world's premier air superiority fighter.

As a Senior Design and Analysis Engineer, you will be responsible for developing engineering solutions for the F-22 Raptor, including both enhancing existing field units with the addition of new capabilities, as well as architecting and testing completely new systems. In this role, you will be joining a cross-functional team to progress our products through the development lifecycle. Tasks include developing requirements to support customer needs, designing a networked architecture to enable new capabilities, and analyzing test data.

Position Responsibilities:

• Collaborates with Responsible Engineers, customer technical staff, suppliers, and Lockheed Martin teammates to develop and document complex electronic and electrical system requirements for F-22 avionics sub-systems and weapon system architecture
• Analyzes and translates requirements into system architecture, hardware and software designs and interface specifications in support of lab and operational environments
• Analyzes test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer

Basic Qualifications (Required Skills and Experience):

• Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement.
• 9+ years of related work experience and a bachelor's degree or an equivalent combination of related work experience and technical education
• Ability to obtain F-22 Special Access Program (SAP) clearance
• Capable of traveling 10% of the time

Preferred Qualifications (Desired Skills and Experience):

• Must be able to work in a fast-paced, collaborative environment, engaging with multiple teams and being responsive to agile requirements and critical path customer need dates
• Experience in avionics, electrical, and/or a mission systems role
• Experience with agile development methodologies

Conflict of Interest:

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range:

Berkeley, MO: $136,850-$185,150

Richardson, TX: $146,200-$197,800

Applications for this position will be accepted until Mar. 27, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.