Lighting Control Methods Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Defense, Space & Security’s Air Dominance division is hiring Associate Guidance Navigation and Control (GNC) Engineers in Hazelwood, MO.

Propelled by a team with an innovative spirit that transcends cultures, Air Dominance delivers decisive mission advantages through cutting-edge capabilities and supports design, manufacturing, and services for a broad portfolio of military aircraft. These roles will support new product design, development, integration and flight test supporting the areas of guidance, modeling and simulation, flight control and subsystem control for the expanding Air Dominance Portfolio, including the newly awarded F-47.

Flight engineers are essential to the development, safety and success of our products and solutions. Each day, they go above and beyond to meet our customers’ overall mission requirements—from initial vehicle concept definition through design, test, validation and in-service support. Your expertise in areas such as Aerodynamics; Propulsion; Guidance, Navigation & Control; and Loads & Dynamics will drive the future of aerospace.

Position Responsibilities:

• Assist in defining Guidance, Navigation and Control mission requirements and ensure requirements traceability and quality from the system level to component level

• Use multidisciplinary model data (aero, mass properties, propulsion, etc.) to develop and refine a complex, nonlinear, 6 degrees of freedom simulation model

• Use various software languages, C, C++, FORTRAN, Python, etc. to develop, implement, integrate and test vehicle models and controllers

• Support design of flight control laws using modern linear control design techniques and tools to achieve design and performance targets

• Use advanced nonlinear analysis to assess and refine the control law design

• Perform model validation against test data to inform and improve the accuracy of the simulation environment

• Develop supplementary controllers, limiters, mode logic, and signal shaping to properly bound the performance within all areas of the flight envelope

• Work with flight simulation and Vehicle Management Systems (VMS) software engineers to incorporate control laws into the operational flight program

• Support flight simulations including desktop, software, and real time simulations

• Support hardware in the loop development and testing

• Support flight testing planning and execution

• Participate in design reviews, analyses, simulations and component/system testing to ensure delivery of products that meet or exceed customer requirements and expectations

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement

• 2 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications.

• Experience with Guidance Navigation & Control engineering

• Experience using Matlab/Simulink or MatrixX to model systems.

Preferred Qualifications (Desired Skills/Experience):

• Active U.S. Secret Security Clearance or higher

• Experience with simulation, system and component modeling

• Experience with implementing algorithms in real time systems

• Hardware in the Loop Simulator (HILS) experience

• Prior experience in flight test support

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting

• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $93,500 – $126,500

Applications for this position will be accepted until Mar. 19, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

TOSHIBA AMERICA ENERGY SYSTEMS CORPORATION

Job Description

Job Title: Program Manager – New Steam Turbine Generator Controls

Business Unit: Thermal Services / New STG

Location: West Allis, WI (Hybrid / Travel as Required)

FLSA Status: Exempt

Manager Level: Individual Contributor

Reports To: Controls Director / Dotted Line to Director of New STG Projects

Job Summary

The Project Manager – Steam Turbine Generator Controls is responsible for planning, coordinating, and executing multiple concurrent, long-term controls projects in support of new Steam Turbine Generator installations. This role serves as the primary interface between customers, internal engineering teams, field services, suppliers, and Toshiba Japan, ensuring projects are delivered safely, on schedule, within scope, and in compliance with contractual, regulatory, and cybersecurity requirements.

In addition to project execution, this role is responsible for coordinating and supporting New Unit customer training and capability development related to turbine and generator control systems.

Project Management & Execution

• Manage multiple concurrent, long-duration Steam Turbine Generator controls projects from contract award through commissioning and closeout.
• Develop and maintain integrated project execution plans, schedules, and risk registers across multiple projects.
• Coordinate internal resources across Controls Engineering, Field Services, Commercial, Supply Chain, and Quality.
• Track project milestones, deliverables, and financial performance; identify and mitigate execution risks.
• Lead scope, schedule, and cost change management activities with customers and internal stakeholders.
• Own end-to-end commercial execution for controls projects, including procurement strategy, vendor quotation management, billing milestones, invoicing coordination, and financial closeout.

Controls & Cybersecurity Awareness

• Maintain working knowledge of turbine and generator control and protection systems.
• Ensure compliance with applicable cybersecurity requirements and customer cyber policies.
• Coordinate cybersecurity reviews, documentation, and testing activities with subject matter experts.
• Support audits, inspections, and regulatory reviews related to controls and cybersecurity compliance.
• Demonstrated working knowledge of industrial control system (ICS) architectures, including SCADA, PLCs, HMIs, servers/workstations, and associated networking and cybersecurity components (e.g., switches, firewalls, virtualization, authentication, and remote access technologies).
• Experience with RADIUS, edge protection, pattern recognition a plus.

Customer Communication & Stakeholder Management

• Serve as frontline customer point of contact for controls project execution.
• Lead project status meetings, technical reviews, and executive communications.
• Prepare and deliver clear project reports, schedules, and presentations.
• Manage customer expectations and resolve issues in a professional and timely manner.
• Produce cost estimates and proposals for additional project opportunities

New Unit Customer Training & Development

• Coordinate New Unit customer training programs related to turbine and generator control systems.
• Define training scope, schedules, and deliverables aligned with project milestones.
• Ensure completion of training materials and system familiarization prior to commissioning.
• Support factory, classroom, and site-based customer training activities.
• Define and lead a training portfolio modernization roadmap focused on reducing delivery cost and internal labor while enhancing scalability and customer experience.

Compliance, Quality & Safety

• Ensure adherence to Toshiba policies, contractual requirements, and regulatory standards.
• Promote safety culture and compliance with EHS requirements.
• Support quality reviews, lessons learned, and continuous improvement initiatives.

Required Qualifications

• Bachelor’s degree in Engineering, Project Management, or a related technical discipline.
• 5–10 years of project management experience, preferably in controls or power generation.
• Demonstrated ability to manage multiple concurrent, long-term projects.
• Strong communication, organization, and stakeholder management skills.
• Proficiency with Microsoft Office and project management tools.

Preferred Qualifications

• Experience supporting new equipment installations in OEM or EPC environments.
• Familiarity with industrial cybersecurity requirements.
• Experience with installation or operation of server, PC, and networking infrastructure within NERC CIP regulatory framework, or grid power generation a plus.
• Experience coordinating customer training and operational readiness activities.
• PMP or equivalent certification.

Travel Requirements

• Travel up to 20–30% to support customer meetings, factory testing, training, and site execution.

Working Conditions

• Combination of office, factory, and field environments.
• Ability to manage competing priorities across multiple long-term projects.

About Tokio Marine:

Tokio Marine has been conducting business in the U.S. market for over a century and we are licensed in all states, Puerto Rico and the District of Columbia, and write all major lines of Commercial Property and Casualty Insurance. We provide unique insurance and risk management tools from our experienced staff of account executives, underwriters and loss prevention engineers and fair and timely claim settlement from a skilled team of claim professionals. We work with major brokers and leading independent insurance agents throughout the United States to serve the world's largest and most distinguished organizations.

We are committed to creating value for our customers by providing ANSHIN (safety, security and peace of mind). We strive to be creative and passionate as we work towards our long-term success.

Tokio Marine Holdings is Japan's oldest, and one of the largest property and casualty insurers. Founded in 1879, TMNF operates worldwide in 47 countries. With annual revenues of approximately $50 billion and an A.M. Best rating of A++, one of the highest in the industry, we are one of the top 20 insurance providers worldwide.

Job Summary

Provide professional Highly Protected Risk (HPR) loss control services to Tokio Marine America clients and Tokio Marine Management, Inc. Coordinates and conducts loss control management evaluations, physical surveys, loss analysis and training to assist Tokio Marine clients to improve and maintain loss control activities. Coordinates and conducts loss control management evaluations, physical surveys and loss analysis to assist Tokio Marine Management Underwriting in their evaluation of risk. Provide loss control technical support to Tokio Marine departments such as underwriting, claims and coordination. Coordinate loss control activities on select accounts ensuring service plans are maintained and completed, responding to customer requests and needs and supporting underwriting and claims at renewal and during the policy period.

Essential Job Functions

• Performs loss control surveys of prospects and clients on request for information underwriting and evaluation from a loss control viewpoint for desirability.
• Coordinates loss control service to select clients requiring defined service standards.
• Prepares reports for clients, Underwriting and Branch concerning the loss control in effect, including loss analysis, conditions noted, recommendations for improvement and future needs.
• Assists in the development and presentation of programs and training seminars for clients and other departments in the Company.
• Responds to special requests from Underwriting Department and clients with prior approval from Loss Control Department Management.
• Develops and maintains Loss Control instructions for multi-location clients being coordinated by Loss Control.
• Completes all work scheduled in regular service assignments or requests in a timely manner.
• Maintains membership and actively participates in professional organizations approved by Departmental standards guidelines.
• Utilizes PC programs (Taurus, Presentation Software, etc.) in preparing presentations for prospects and clients.
• Plans and performs work scheduling in a timely and cost-effective manner.
• Responsible for complying with proper internal controls as necessary to conduct job functions and/or carry out responsibilities and/or administrative activities at the Company.

Qualifications

• Bachelor’s degree in engineering / science or equivalent job experience preferred.
• Five years’ experience servicing major accounts preferred.
• Possesses a specialty in HPR loss control or comparable property insurance background.
• Good communication skills, both written and oral and capable of making presentations to a group.
• Good computer skills to include the use of Microsoft software, and other software.
• Valid driver's license free of any major violations.
• Physically capable of performing the job requirements - walking, carrying and climbing.
• Capable of significant amounts of travel.

Salary range $150,000 to $170,000. Ultimate salary offered will be based on factors such as applicant experience and geographic location. Our company offers a competitive benefits package and bonus eligibility on top of base.

TMA believes the perfect candidate is more than just a resume. If you don't meet every single requirement, but are still interested in the job, we encourage you to apply.

Benefits:

We offer a comprehensive benefit package, which includes a generous 401K match. Our rich history of outstanding results and growth allow us to focus our business plan on continued growth, new products, people development and internal career opportunities.

EEO Statement

Tokio Marine Management is an Equal Opportunity Employer. In order to remain competitive we must attract, develop, motivate, and retain the most qualified employees regardless of age, color, race, religion, gender, disability, national or ethnic origin, family circumstances, life experiences, marital status, military status, or sexual orientation.

Job Title: Power Electronics Control System Engineer

Location: Fargo, ND

Job Type: Full-Time

We are seeking a Power Electronics Control System Engineer to develop and validate electrification control solutions at both component and system levels using a model-based design approach. The ideal candidate will have hands-on experience in control algorithm development, power electronics simulation, and system-level validation including HIL and laboratory testing.

Key Responsibilities:

• Develop electrification control solutions for power electronics and electric drive systems using model-based design methodologies.
• Design, analyze, and implement control algorithms for power converters and electric motor systems.
• Perform system-level modeling and simulation using MATLAB, Simulink, and Simscape.
• Conduct electric drive and vehicle system simulations to support control development and performance evaluation.
• Validate control strategies through simulation, Hardware-in-the-Loop (HIL), laboratory, and field testing.
• Support auto-code generation and embedded implementation on microcontrollers and/or FPGAs.
• Develop and refine system requirements in collaboration with cross-functional stakeholders.
• Participate in system integration, debugging, and performance optimization activities.
• Document control strategies, validation results, and system performance metrics.
• Support continuous improvement initiatives in control system development processes.

Required Qualifications:

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Physics, or related field.
• 1+ years of experience in power electronics or control algorithm development (academic research experience considered).
• Proficiency in MATLAB, Simulink, and Simscape.
• Experience in simulating power electronics, electric machines, and/or control systems.
• Strong analytical and problem-solving skills.
• Effective written and verbal communication skills in English.

Preferred Qualifications:

• Master’s degree in Electrical Engineering, Physics Engineering, or Mechanical Engineering with a focus on power electronics and/or control systems.
• Hands-on laboratory or vehicle testing experience with power electronics or electric motors.
• Experience with Hardware-in-the-Loop (HIL) testing.
• Experience with embedded systems, auto-code generation, and microcontroller/FPGA implementation.
• Working knowledge of version control systems and Agile development methodologies.
• Experience with advanced control techniques (observers, model predictive control, filter design, etc.).
• Experience in power electronics hardware or software design.

Job Summary

Electrical Controls Engineers at client design, program, implement, troubleshoot, and improve our electronic control systems to better automate, control, and monitor our production processes. The Electrical Controls Engineer applies comprehensive electrical engineering skills and industry experience in support of the design, fabrication, and implementation of new equipment. They need to be proficient in a variety of logic control hardware, HMI’s and programming software, as well as the associated sensors, vision systems, motors, drives, actuators, and industrial communication networks. They are responsible for writing, troubleshooting, and modifying our ladder logic programs that control the way our equipment operates. They further provide expert-level troubleshooting support on existing automated equipment as a backstop for our maintenance technicians. Depending on the complexity of the equipment needed, they may additionally serve as the project lead for an entire piece of automated equipment, and thus may also coordinate activities for internal mechanical designers and/or external contractors to deliver a turn-key piece of production equipment.

Primary Responsibilities

• Design and program new and/or upgraded control systems for our manufacturing equipment to be used on both new and existing products.
• Provide tier 3 troubleshooting support to maintenance technicians on particularly difficult equipment problems.
• Define and document requirements for new control systems and control system upgrades.
• Mock-up prototype equipment and control systems in order to evaluate the ability of designs to achieve their intended purpose.
• Prepare design review documentation to facilitate peer and leadership review
• Document control systems using control schematics, electrical diagrams, panel layouts, and through meticulous software program comments.
• Develop and perform system verification and validation tests to ensure safe and proper functioning.
• Provide guidance, mentoring, and assistance to peers and junior engineers and technicians.
• Coordinate with Program Managers, R&D, Engineering and Management to prepare detailed plans and estimates for equipment in support of capital expenditure requests.
• Prepares statements of work and compile cost estimates for new control equipment
• Assists with make/buy decisions and oversee the design and build process for outsourced systems.
• Stays informed concerning new technologies, materials and equipment, and investigates potential applications.
• Maintain the highest ethical standards, even when challenged from above.
• Understand and live by Armtec’s ethics and business conduct policies.

Education & Professional Work Experience Requirements

• Must be authorized to work in the U.S.
• To conform to U.S. export control regulations, applicant should be eligible for any required authorization from the U.S. Government.
• QualificationsBachelor’s degree in an engineering discipline with 5+ years of controls engineering experience required.
• Demonstrated experience in designing and deploying automated control systems in a manufacturing environment.
• Ladder Logic programming experience using RSLogix 500, and Studio 5000
• HMI development experience, prefer experience with FactoryTalk View Studio
• Demonstrated ability to troubleshoot AC/DC electrical equipment problems and perform system tests.
• Experience with creating electrical schematics and control system diagrams. Autocad Electrical experience is preferred.
• Prefer experience implementing Allen Bradley Micrologix, and CompactLogix PLC’s and various touchscreen HMI panels, such as Panelview and C-more HMI’s.
• Additional experience with various Industrial networks is a plus.
• Additional experience with Cognex Vision inspection system and experience with various servo drive/controllers is a plus

Job Title: Director of Loss Control (DLC)

Department: FMIC Loss Control

Reports To: President/CEO

Summary: 

The Director of Loss Control leads Forestry Mutual’s specialized Loss Control and Risk Management program for commercial forestry, logging, and associated transportation operations. This role provides strategic leadership, supervises Loss Control staff, and ensures effective delivery of risk assessment, safety guidance, and operational support to policyholders.

The Director collaborates closely with underwriting and claims teams to identify emerging risks, implement mitigation strategies, and reduce the frequency and severity of losses. This position also serves as a mentor and support resource for Loss Control staff, ensuring staff are trained, coached, and empowered to work effectively with policyholders in high-risk forestry, logging, and timber trucking operations.

Essential Duties and Responsibilities:

Leadership and Staff Support

• Directly supervise and support all Loss Control personnel, providing guidance, mentoring, and coaching.
• Conduct regular one-on-one meetings, field evaluations, and performance reviews to ensure staff effectiveness.
• Assist Loss Control staff in addressing complex or challenging policyholder situations, ensuring compliance with safety recommendations and operational standards.
• Recruit, train, and retain specialized Loss Control staff with experience in forestry, logging, or heavy equipment operations.

Strategic Risk Management

• Develop and implement Forestry Mutual’s Loss Control strategy for forestry, logging, timber trucking, and related operations.
• Establish policies, procedures, and best practices tailored to high-risk forestry operations.
• Identify emerging trends, new hazards, and areas of loss exposure specific to commercial forestry operations.
• Recommend innovative solutions and mitigation strategies to reduce operational and property losses.

Underwriting and Claims Support

• Partner with underwriting teams to evaluate new and renewal accounts, supporting risk selection and pricing decisions.
• Provide technical risk assessments for timber harvesting, logging equipment, trucking, and sawmill operations.
• Collaborate with claims and third-party administrators to analyze major losses, perform post-loss investigations, and recommend corrective actions.
• Identify loss patterns and implement preventative measures to reduce claim severity and frequency.

Field Operations and Policyholder Engagement

• Lead and participate in field visits, on-site safety assessments, and operational inspections for policyholders.
• Provide guidance on forestry safety, heavy equipment operation, trucking compliance, and regulatory requirements.
• Promote safe work practices, operational compliance, and a positive safety culture among policyholders and subcontractors.
• Serve as a visible resource for policyholders needing specialized safety or operational support.

Data, Metrics, and Reporting

• Develop, monitor, and maintain key performance indicators (KPIs) specific to forestry, logging, and trucking operations.
• Track staff field activities, loss trends, and program effectiveness; provide regular reports to executive leadership.
• Analyze claims data and operational trends to guide strategic decisions and departmental priorities.

Industry Engagement and Education

• Participate in forestry, logging, and transportation industry associations, conferences, and educational events.
• Represent the Company in industry forums to enhance reputation and share expertise in forestry risk management.
• Oversee development of educational materials, safety bulletins, and training programs for policyholders.

Administrative Responsibilities

• Manage departmental budget and ensure resources are aligned with Loss Control goals.
• Maintain confidentiality of company and policyholder information.
• Provide operational leadership support in the absence of executive management.
• Perform other duties as assigned

Supervisory:

This position oversees Loss Control department staff.

Qualifications:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education/Experience

• Bachelor’s degree in Forestry Management, Risk Management, Safety, Insurance, or related field preferred.
• 8–12 years of Loss Control, Risk Management, or Safety experience in forestry, logging, or commercial trucking operations.
• Experience in Property & Casualty insurance preferred, especially in underwriting or claims support.
• Proven leadership experience managing a team of Loss Control or safety professionals.
• Deep knowledge of logging operations, timber harvesting, sawmill processes, and heavy equipment exposures.
• Familiarity with trucking operations, including log transport and rural road risks.
• Experience working with commercial lines underwriting and claims teams in specialized operations.

Licenses/Credentials

Professional designations such as (CSP,ARM,CPCU and CRM) are a plus. 

Required Skills/Abilities

• Supervisory leadership and staff development
• Risk assessment and hazard identification in forestry operations
• Strategic planning and program management
• Data-driven loss trend analysis
• Strong communication and policyholder relationship skills
• Knowledge of regulatory, environmental, and occupational safety standards
• Problem-solving and decision-making in high-risk operational environments
• Organization, prioritization, and multi-tasking skills.
• Excels in logistics, process, and workflow improvement.
• Proficient in excel and data management.
• Exceptional verbal, written, and visual communication skills.
• Excellent organizational skills and attention to detail

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The work is typically performed in an office environment, with a moderate noise level. Occasional travel to other company locations may be required.

Other travel, including extensive overnight, may occasionally be required.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

·                    Prolonged periods sitting.

·                    Kneeling to reach storage.

·                    Ability to lift up to 10 pounds at times.

·               Fast-paced environment with constant multi-tasking in a fluctuating environment.

Benefits:

Comprehensive benefits package offered. 401k Matching, Health/Vision/Dental Insurance, Short Term Disability, Long Term Disability, Life Insurance, Paid Holidays, Paid Sick Time, Paid Vacation.

• 
  
• Initiates design documents for small projects and in support of large programs
  
• Develops design documents narratives
  
• Performs requirements analysis
  
• Develops Sequence of Operations / System Functional Documentation
  
• Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
  
• Develops Specifications
  
• Performs QA/QC and technical reviews of designs
  
• Plans and Design Procedures and Equipment for Integrated Systems Factory Testing
  
• Comment Resolution
  

Mechanical-focused controls engineer (BAS/BMS)

• 
  
• Experience on EPMS monitoring
  
• Certifications in Platforms (at least one), familiarity with any others preferred: Ignition, Aveva, Automated Logic, Siemens, Schneider EBO, Niagara N4, Iconics Gen64
  
• Experience with Federal Government controls projects (ICS/EMCS/UMCS) preferred
  
• Familiarity with Cisco network switch programming and design preferred
  

• 
  
• Lead programming / configuration team efforts for complex automation and SCADA applications.
  
• Program / Configure / troubleshoot PLCs, RTUs, and/or HMI systems
  
• Testing / Troubleshooting / Deployment / Commissioning
  
• Author testing / commissioning procedures
  
• Preparation of test reports
  
• Originates test procedures
  
• Commissioning of deployed systems
  
• Development of test equipment and simulation devices
  
• Perform Factory and Field Testing
  

• 
  
• Perform troubleshooting on service calls to existing and legacy system operators
  
• Perform hardware / software upgrades and replacements on existing systems
  

• 
  
• Conducts any surveys, inspections, tours, etc. of client sites, as required
  
• Prepares cost estimates and supporting documents for small projects
  
• Perform hardware / software upgrades and replacements on existing systems
  
• Evaluation and pricing of change orders
  

• 
  
• Assigns technical tasks and coordinates with entry-level engineers
  
• Assigns tasks and coordinates with Technical Staff
  

• 
  
• Experience in reading electrical and control schematics and plans
  
• Experience in control system startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and machinist hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• 3-7 years' experience
  
• Bachelor's degree in engineering or higher
  
• Associate degree (add 3 years)
  
• High school diploma (add 5 years)
  
• Must be a US Citizen
  

• 
  
• Experience in computer networks
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software
  
• Standard Office Software (Microsoft Word, Excel, etc.)
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  
• Design Build Institute of America (DBIA)
  
• Engineer in Training (EIT) in relevant in field
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Defense, Space & Security's Air Dominance division is hiring a Lead Guidance Navigation and Control (GNC) Engineer in Hazelwood, MO.

Propelled by a team with an innovative spirit that transcends cultures, Air Dominance delivers decisive mission advantages through cutting-edge capabilities and supports design, manufacturing, and services for a broad portfolio of military aircraft. These roles will support new product design, development, integration and flight test supporting the areas of guidance, modeling and simulation, flight control and subsystem control for the expanding Air Dominance Portfolio, including the newly awarded F-47.

Flight engineers are essential to the development, safety and success of our products and solutions. Each day, they go above and beyond to meet our customers' overall mission requirements—from initial vehicle concept definition through design, test, validation and in-service support. Your expertise in areas such as Aerodynamics; Propulsion; Guidance, Navigation & Control; and Loads & Dynamics will drive the future of aerospace.

Position Responsibilities:

• Define Guidance, Navigation and Control mission requirements and ensure requirements traceability and quality from the system level to component level
• Use multidisciplinary model data (aero, mass properties, propulsion, etc.) to develop and refine a complex, nonlinear, 6 degrees of freedom simulation model
• Use various software languages, C, C++, FORTRAN, Python, etc. to develop, implement, integrate and test vehicle models and controllers
• Design flight control laws using modern linear control design techniques and tools to achieve design and performance targets
• Use advanced nonlinear analysis to assess and refine the control law design
• Perform model validation against test data to inform and improve the accuracy of the simulation environment
• Develop supplementary controllers, limiters, mode logic, and signal shaping to properly bound the performance within all areas of the flight envelope
• Work with flight simulation and Vehicle Management Systems (VMS) software engineers to incorporate control laws into the operational flight program
• Support flight simulations including desktop, software, and real time simulations
• Support hardware in the loop development and testing
• Support flight testing planning and execution
• Lead design reviews, analyses, simulations and component/system testing to ensure delivery of products that meet or exceed customer requirements and expectations
• Train and coach others

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
• 14 or more years' related work experience or an equivalent combination of technical education and experience
• 5+ years of experience with Guidance Navigation and Control engineering
• Experience using Matlab/Simulink or MatrixX to model systems

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range (Level 5): $170,850 - $231,150

Applications for this position will be accepted until Mar. 19, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.