Lg Electronics Inc Jobs in Usa

• Provide advanced medical care and operational services for Marine Reconnaissance, USMC Special Operations Forces and Navy Special Operations Command personnel, like SWCC and SEALs
• Engage as a team member in direct action, special reconnaissance, foreign internal defense and unconventional warfare

• Rescue patients and deliver emergency care from the back of a helicopter
• Perform aircrew duties and En Route Care (ERC) for routine illness and emergent patients
• Provide relief and assistance in areas ravaged by catastrophic natural disasters
• Support Search and Rescue (SAR), tactical evacuation (TECEVAC), Medical Evacuation (MEDEVAC), casualty evacuation (CASEVAC) and Combat Search & Rescue (CSAR) for Navy and Marine Corps Aviation

• Provide basic medicine and assist medics in prevention and treatment of diving related illnesses, injuries associated with deep sea diving and hyperbaric conditions
• Operate, test and repair all Navy diving equipment
• Perform underwater inspections, harbor/port/ship security inspections, conduct ordnance searches, rescue personnel, engage in special warfare and small boat operations
• Operate Swimmer Delivery Vehicle Dry-Deck Shelter system and submarine Lock-in/Lock-out systems

• Special Operations Independent Duty Corpsman Pipeline (121 weeks)
  Areas of training include but are not limited to basic reconnaissance, airborne operations, combatant diving, demolitions, clinical diagnostics, advanced trauma skills, Advanced Cardiac Life Support (ACLS), basic surgical anesthesia, basic veterinary medicine and basic dental exams.
• Search and Rescue Medical Tech Pipeline (27 weeks)
  Areas of training include but are not limited to advanced fluid resuscitation, administration and management of Advanced Life Support medications, use of emergency medical equipment, rescue and recovery devices and patient handling.
• Medical Deep Sea Diving Tech Pipeline (28 weeks)
  Areas of training include but are not limited to diving physics, scuba and surface-supplied air diving, recognition and treatment of diving related illnesses.
  After completing your pipeline, you'll receive your first assignment. You'll go wherever you're needed, which can be anywhere in the world. Automatic promotion opportunities are available but are competitive and based on completion of pipeline.
  Post-Service Opportunities
  There's no better way to begin a successful career in health care than by serving in the medical support division of America's Navy. Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian world, such as Emergency Medical Technician (EMT), Home Health Aide, Anesthesiologist Assistant and more.
  Education Opportunities
  Beyond offering access to professional credentials and certifications, Navy technical and operational training in the medical field can translate to credit hours toward a bachelor's or associate degree through the American Council on Education.
  You may also continue your education through undergraduate degree opportunities like the Navy College Program and Tuition Assistance and the Post-9/11 GI Bill.
  Qualifications & Requirements
  A high-school diploma or equivalent is required to become an Enlisted Sailor. Those seeking a position as a Hospital Corpsman must be U.S. citizens.
  While no college degree is required to apply for a position as a Hospital Corpsman Advanced Technical Field, a high degree of difficulty should be expected. Entry Requirements include:
  • Vision correctable to 20/20
  • Normal color perception
  • Pass a physical examination
  • 28 years of age or younger
  • U.S. citizen eligible for security clearance
  
  In addition to strong communication, writing and arithmetic skills, you should also have a genuine interest in providing health care, along with good use of your hands and strong physical stamina.
  The Minimum and Elevated Navy Physical Screening Test (PST & EPST) requirements are:
  For Special Operations Independent Duty Corpsman (SOIDC)
  Exercise Time Min. Elevated Swim 500 yards (breast or sidestroke) Unlimited 12:30 9:30 Push-up 2:00 50 75 Curl-up 2:00 50 75 Pull-up 2:00 10 15 Run 1.5 miles Unlimited 10:30 9:30
  For Search and Rescue Medical Technicians (SMT)
  Exercise Time Min. Swim 500 yards (breast or sidestroke) Unlimited 12:00 Push-up 2:00 42 Pull-up 2:00 04 Run 1.5 miles Unlimited 12:00
  For Deep Sea Diving Medical Technicians (DMT)
  Exercise Time Min. Swim 500 yards (breast or sidestroke) Unlimited 12:00 Push-up 2:00 50 Pull-up 2:00 06 Run 1.5 miles Unlimited 11:30
  Candidates who achieve the Elevated Physical Screening Test (EPST) scores shown above may qualify for the Enlisted Bonus for Shipping (EB-SHP) program. These elevated standards must be met during your 14-day shipping PST to be eligible for the bonus. Learn more about Navy enlistment bonuses.
  Important personal traits for this role include maturity, resourcefulness, dependability and trustworthiness. Please note that any illegal involvement with drugs may be disqualifying.
  General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before.
  Part-Time Opportunities
  There are no part-time jobs as a Navy Reserve Sailor in this role. Go back to Careers to find other jobs that have a Reserve component. You can also find out more about what life is like as a Reserve Sailor in the Navy.
  Compare Navy Careers
  See how a career as a Hospital Corpsman Advanced Technical Field compares to other Navy jobs.

Are attention to detail and excellent soldering abilities among your key strengths? Do you enjoy reading schematics and implementing ECOs? Can you see yourself playing an important role on a team dedicated to producing world-class quality electronic products? Annapolis Micro Systems is searching for dedicated and passionate Assemblers to join our production team and take pride in sending products to test with zero defects.

Founded in 1982 and located in beautiful Annapolis, Maryland, we have a long history of designing and building the highest-performing embedded computing products. We offer the variety, challenge, and stability you are looking for. We perform both government and commercial work, and members of our small, tight-knit team get to wear multiple hats.

Our production team is a close-knit group of professionals who are upbeat, talented, and extremely proud of their work and the cutting-edge products they produce. We use automated Surface Mount Technology (SMT) equipment to assemble our own high-quality printed circuit cards.

Join us today and become part of the future of computing technology!

This position will be on the 2nd shift, 2:00 p.m. to 11:00 p.m., Monday through Friday. The initial training period will take place during the 1st shift, 6:00 a.m. to 3:00 p.m.

Essential Duties and Responsibilities

• Solder THT and SMT components per IPC A 610 Class III Standards
• Rework and touch up per IPC A 610 Class III Standards
• Assemble PCBs into complex modules
• Build cable and chassis assemblies
• Press-fit connectors using a benchtop manual press
• Implement ECOs
• Inspect incoming material: PCBs, panels, heatsinks, etc.
• Complete final assembly of products
• Build prototypes for Engineering using schematics
• Keep Manufacturing consumables stocked, communicate stock levels and requirements to Purchasing team

Requirements

• Minimum High School or equivalent
• Certified to J-STD-001 preferred
• Excellent Soldering Skills
• Manual Dexterity
• Able to lift 20 lbs
• U.S. Citizenship

Are attention to detail and excellent soldering abilities among your key strengths? Do you enjoy reading schematics and implementing ECOs? Can you see yourself playing an important role on a team dedicated to producing world-class quality electronic products? Annapolis Micro Systems is searching for dedicated and passionate Assemblers to join our production team and take pride in sending products to test with zero defects.

Founded in 1982 and located in beautiful Annapolis, Maryland, we have a long history of designing and building the highest-performing embedded computing products. We offer the variety, challenge, and stability you are looking for. We perform both government and commercial work, and members of our small, tight-knit team get to wear multiple hats.

Our production team is a close-knit group of professionals who are upbeat, talented, and extremely proud of their work and the cutting-edge products they produce. We use automated Surface Mount Technology (SMT) equipment to assemble our own high-quality printed circuit cards.

Join us today and become part of the future of computing technology!

This position will be on the 1st shift, 6:00 a.m. to 3:00 p.m., Monday through Friday.

Essential Duties and Responsibilities

• Solder THT and SMT components per IPC A 610 Class III Standards
• Rework and touch up per IPC A 610 Class III Standards
• Assemble PCBs into complex modules
• Build cable and chassis assemblies
• Press-fit connectors using a benchtop manual press
• Implement ECOs
• Inspect incoming material: PCBs, panels, heatsinks, etc.
• Complete final assembly of products
• Build prototypes for Engineering using schematics
• Keep Manufacturing consumables stocked, communicate stock levels and requirements to Purchasing team

Requirements

• Minimum High School or equivalent
• Certified to J-STD-001 preferred
• Excellent Soldering Skills
• Manual Dexterity
• Able to lift 20 lbs
• U.S. Citizenship

WE ARE PDHGROUP

We are a values-driven company that strives to provide the best quality service and products for the construction industry. As a provider and installer of Division 8, Division 10, Division 27, and Division 28 products, our business is built on honesty, integrity, and the ability to get the job completed on-time and with complete customer satisfaction. Our team brings over 425 years of combined experience and includes some of the most knowledgeable people in the industry.

JOB SUMMARY:

As a Project Manager, you will be accountable for the overall direction, coordination, implementation, execution, control and completion of any given project. Additionally, the Project Manager ensures budget and deadlines are met and consistent with project standards.

DUTIES AND ESSENTIAL JOB FUNCTIONS:

• Create a Schedule of Values for our pay applications and submit to the General Contractor.
• Analyze the construction schedule and create a schedule for submittals, material ordering and estimated field labor durations & project completion.
• Create submittals for doors, frames and hardware from architectural plans and specification.
• Manage and respond to electronic contractual changes (RFI’s, PC’s, Etc.). Quote changes that affect our material and/or labor cost. Distribute Change Order Due letters to the contractor.
• Order materials (Purchase orders) from approved submittals for timely delivery according to the construction schedule or as agreed upon with the contractor for billed and stored material.
• Support the Performance Door project field supervisor for the timely delivery of materials according to the construction schedule. Send field use drawings periodically reflecting updated schedules incorporating project revisions.
• Provide monthly pay application to the accounting department including back up documentation for stored or FSC materials.
• Actively pursue contractual “Change Orders” from “price and proceed” CO Due letters. Take an active role in collecting money.
• Approve weekly vendor invoices for payment. Check vendor costs against our purchase order.
• Other job duties and responsibilities as needed.

At Integrated Micro Electronics, Inc. (IMI), we bridge the gap between complex electronics design and global-scale manufacturing. As one of the global leaders in the Automotive & Mobility sector, we specialize in the high-reliability solutions required for the next generation of transportation.

We are seeking a Senior Key Account Manager—a strategic individual contributor possessing the technical gravitas to navigate the complexities of the U.S. automotive landscape. In this capacity, you maintain full ownership of the customer relationship throughout the entire business engagement.

You are not merely managing a portfolio; you serve as a strategic partner, aligning IMI’s global capabilities to provide an optimized value proposition for our clients. Your mission is to plan, develop, and manage accounts within our strategic markets to meet corporate revenue targets. As the "voice of the customer" within IMI, you will facilitate cross-functional collaboration to ensure the achievement of key account objectives—translating customer product roadmaps and market positioning into actionable growth strategies. If you are an expert at cultivating long-term value and driving revenue within the top tier of the automotive industry, we invite you to connect with us.

Reports to:

Sales Director - Mobility

Responsibilities

• Develop and execute comprehensive account strategies that align with IMI’s corporate roadmaps and long-term growth objectives.
• Drive sustainable revenue growth by securing new business wins and expanding partnerships with existing customers across various business units.
• Identify and qualify high-potential, financially sound program opportunities that strategically fit IMI’s specialized manufacturing capabilities.
• Cultivate and maintain influential relationships across all functional working levels to ensure long-term customer loyalty and satisfaction.
• Lead the end-to-end sales process, from initial discovery and solicitation of quotations to the final generation of a sustainable opportunity pipeline.
• Orchestrate the RFQ process by assessing customer requirements and collaborating with internal business units to determine the optimal factory and capacity solutions.
• Provide critical market insights and competitive intelligence from assigned accounts to support strategic development and technology roadmaps.
• Ensure organizational alignment through timely status reporting and the generation of accurate sales and revenue forecasts.

Qualifications:

• Bachelor’s degree in Engineering, Sales, Marketing, or a related field; an advanced degree (Master’s or Doctorate) or professional certification is highly regarded.
• Minimum of 5 years of experience in high-level account management or sales, with a functional understanding of the EMS, PCBA, or electronics manufacturing landscape.
• Proven track record in "sales hunting," deal closure, and strategic account growth, underpinned by a strong grasp of financial principles and complex sales processes.
• Highly analytical professional with expertise in project management and decision-making, capable of translating customer roadmaps into successful program opportunities.
• Exceptional interpersonal and presentation skills, with the ability to facilitate cross-functional collaboration and engage effectively with stakeholders at all levels.

Why IMI?

• The opportunity to lead high-stakes accounts with the independence of a senior expert.
• Access to a worldwide network of engineering excellence and manufacturing power.
• A seat at the forefront of the EV and Mobility revolution.
• Competitive pay package and a flexible, remote-friendly environment designed for high-performing professionals.

Company Description

Peerless Electronics Inc., an employee-owned company founded in 1945 and based in Hauppauge, New York, is a full-service, authorized stocking distributor supporting military, aerospace, industrial, transportation, and medical sectors. Peerless provides an extensive inventory, including switches, circuit breakers, thermostats, and sensors, along with over 50 value-added services and customized technical support. Peerless is committed to quality, innovation, and supporting customer needs in specialized industries.

Our Inside Sales Representatives receive requests for quotation and orders from customers. They generate quotations, enter orders and relay pertinent information to customers. They are also expected to coordinate with other departments, manufacturers, and sales representatives surrounding handling of orders and providing service to customers.

Job Responsibilities

• Sell products and services offered by Peerless Electronics. Sales are attained by building relationships and customizing the sales approach to evaluate and deliver on the customer’s needs.
• Provide price and delivery quotes to customers within an assigned territory by working with the purchasing department, Sales manager and the manufacturers to get the most competitive pricing.
• Process customer orders by entering into the sales database, confirming price, availability, and delivery schedules. Order and Contract review requires attention to detail and proof reading for accuracy and maintaining quality expectations.
• Participate in the quality process by following defined policies and procedures to maintain efficient sales cycle with the goal reducing sales errors and uphold quality to the highest level. Actions are measured by our On Time Delivery percentage.
• Monitor dashboard reports to assess customer performance
• Qualify and cultivate prospective customers and opportunities in addition to the assigned existing customer base. Update CRM as needed.
• Provide management with information regarding sales, marketing techniques, new products and market strategy by preparing forecast and activity reports on account territory.
• Participate in and attend sales meetings with Field Sales Representatives to develop sales relationship and trust with the customers.
• Meet mutually agreed upon goals and objectives while performing other assigned and related duties.

Job Requirements

• Bachelor’s degree or equivalent experience in Business
• 1-3 years of inside sales experience
• Working knowledge of the most current technologies and products in the electromechanical industry is helpful but not required.
• Experience within the military, aerospace or industrial sector is preferred
• Sound judgment and problem-solving skills
• Ability to multi-task, organize, and prioritize work
• Excellent communication skills, both written and verbal

Physical Requirements

• Hand dexterity ability (ability to operate telephone, computer)
• Ability to sit for extended periods of time

Work Authorization

• Position requires candidate to be a U.S. person as defined in ITAR, 22 CFR 120.15 (U.S. Citizenship or Resident Alien Status) and defined by 8 U.S.C. 1101(a) (20).

Compensation

• $24-28 per hour depending on experience, plus commission

Inventory Associate Overview:

LX Pantos America, Inc. delivers Value Added Logistics Solutions on a Global Scale with a customized approach to meet the client's needs and demands.

Are you looking for an exciting new career or to advance your career within the company?

If so, we have a great, challenging and dynamic work environment for you.

We are currently searching for a highly motivated Inventory Associate for our growing team that manages all of LG Electronics return functions.

Inventory Control (Primary Responsibility)

• Own inventory accuracy across multi-site warehouse operations
• Manage system vs. physical inventory reconciliation
• Design and execute cycle count and audit programs
• Investigate inventory variances and drive root cause analysis
• Monitor shrinkage, adjustments, and aging inventory
• Warehouse Operations Process Improvement (PI)

Analyze warehouse KPIs (productivity, error rate, on-time performance)

• Develop and roll out standardized SOPs for: Receiving, Shipping, Transfers, Returns and damages
• Benchmark performance across warehouses and share best practices
• Build and maintain inventory and operations dashboards
• Conduct occasional site visits (Approximately 20% travel) for audits, alignment, and improvement rollout
• Support new warehouse launches from an inventory and process perspective

Basic Requirements:

• Bachelor’s Degree or equivalent preferred
• Minimum 0-3 years of professional experience in Inventory, Operations, Supply Chain, or equivalent field
• Strong proficiency in Excel (VLOOKUP, PIVOT TABLE) to clean, sort, and organize large sets of data and run analysis for key insights
• Plus for Tableau
• Desire to work in a fast-paced and rapidly-evolving environment
• Business trips are required

Preferred Requirements:

• Strong Analysis skills and critical thinking

Job Type: Regular, Full-Time

Job Location: Englewood Cliffs, NJ 07632

Business Hours: Mon-Fri 08:00 AM to 5:00 PM

Senior / Principal Controls Engineer – Manufacturing Automation

Compensation: $140 - $200K (Salary, bonus, annual stock)

Location: NH

A growing advanced-manufacturing organization is seeking an experienced Controls Engineer to design and implement custom automation and functional test systems used in high-mix production environments. This role focuses on creating one-of-a-kind equipment that improves assembly efficiency, product quality, and test reliability across global operations.

Responsibilities

• Architect and deploy automated assembly and test solutions integrating motion control, servos, sensors, gages, and plant-level data/SCADA systems.
• Lead electrical and controls design for custom machinery, ensuring compliance with safety, quality, and performance standards.
• Collaborate with cross-functional engineering and operations teams to deliver scalable manufacturing improvements.
• Provide technical leadership and mentorship to junior engineers while promoting continuous improvement practices.

Qualifications

• Bachelor’s degree in Electrical Engineering or similar discipline with 10–15+ years in industrial automation or machine controls.
• Strong PLC programming experience (Allen-Bradley / Logix platforms), robotics integration, and machine vision systems.
• Proven ability to integrate hardware, software, and mechanical systems into turnkey solutions.
• Working knowledge of CAD tools, data/analytics platforms, and structured problem-solving methodologies such as Lean or Six Sigma.
• Backround with power electronics and/or motion control is preferred.
• Excellent communication skills and project leadership experience in a manufacturing setting.
• Must be US Citizen or Permanent Resident

This position suits engineers who enjoy hands-on design, system integration, and solving complex production challenges through innovative automation.

Company provides relocation and exceptional benefit program.

Contact:

Rich Cardarella

Power Technology Associates Inc.

617-435-2478

Join the MEPPI Team!

Mitsubishi Electric Power Products, Inc. (MEPPI) is seeking a Quality Assurance Engineer II - Manufacturing to plan, direct and support activities to assess and provide for root cause analysis and corrective action implementation for Transportation Systems Division (TSD) quality problems. Implement and maintain quality assurance programs and lead efforts with internal audits.

This position will report to the TSD Quality Assurance Section Manager and is an onsite position in Freedom, PA.

What You’ll Do:

• Participate in and/or lead supplier validation audits using product quality planning tools.
• Collaborate with suppliers to investigate quality problems, identify root causes of problems, develop correction action plans and implement improvements. Verify corrective actions are implemented and maintained.
• Serve as a quality assurance liaison to Japan. Learn and implement applicable Japanese techniques for quality assurance improvements.
• Participate in the development of new products or modifications of existing products to meet customer requirements.
• Participate in and/or lead internal audits. Work with all departments to help close audit findings in an effective and timely manner.
• Coordinate continued evaluation of procedures and documentation throughout TSD. Verify for completeness, accuracy and lack of redundancy.
• Facilitate in-house quality assurance and manufacturing improvement programs throughout TSD.
• Assure quality records are generated, retained, stored, protected and disposed of according to TSD and Company policies.

What You’ll Bring:

• Bachelor’s Degree in Engineering or related technical field with 3-5 years of experience in quality control and/or assurance function, or equivalent education and experience.
• Advanced knowledge of QA and manufacturing improvement practices such as Lean Six Sigma and Black Belt and an understanding of the underlying philosophy.
• Advanced knowledge of quality techniques such as Statistical Process Control, Deming Methods, 5-Why, 8DS, etc.
• Advanced interpersonal communication and presentation skills required to communicate with customers, vendors and employees.
• Advanced analytical and problem-solving skills.
• Advanced computer skills with emphasis on MS Office products and MRP/ERP systems.

What’s in It for You:

Comprehensive Health Coverage:

• MEPPI pays up to 90% of the cost for medical, dental, and vision plans.

Retirement Plans:

• 401(k) match of up to 4%.

Generous Paid Time Off:

• Earn vacation after just 90 days, plus enjoy 12 paid holidays annually.

Career Growth:

• Access to professional development programs and educational assistance.

Employee Perks:

• On-site fitness center (Warrendale, PA), wellness program, profit sharing, and employee discounts.

Why MEPPI:

As a proud U.S. affiliate of Mitsubishi Electric, MEPPI powers critical infrastructure and rail transportation solutions across North America. We value collaboration, innovation, and people—because we know that our greatest asset is our team. Join us and help shape a future where talent and technology thrive

Equal Opportunity Employer:

MEPPI is committed to diversity and inclusion in the workplace. We welcome applicants from all backgrounds and ensure fair consideration for every candidate.

Notice to Agencies and Search Firms:

We do not accept unsolicited resumes from agencies. Submissions without signed agreements become the property of MEPPI, and no fees will be paid.

Applicants are considered for all positions without regard to race, color, religion, sex, gender, sexual orientation, gender identity, gender expression, pregnancy, marital status, national origin, ancestry, age, physical or mental disability or (as defined by applicable law) medical condition or genetic information, military or veteran status or any other legally protected status.

Notice to Agency and Search Firm Representatives: Mitsubishi Electric Power Products, Inc. is not accepting unsolicited resumes from agencies and/or search firms for this job posting. Resumes submitted to any Mitsubishi Electric Power Products, Inc. employee by a third party agency and/or search firm without a valid written and signed search agreement, will become the sole property of Mitsubishi Electric Power Products, Inc. No fee will be paid if a candidate is hired for this position as a result of an unsolicited agency or search firm referral.

Production Supervisor

Windings, Inc.

Moorpark, CA

Salary Range: $75,000 - $90,000 per annual DOQ

Windings Inc. is a 100% employee-owned company where every team member shares in our success. Since becoming an ESOP in 1998, we've proudly supported critical industries like Aerospace, Defense, Automotive, and Medical. Our unique ESOP benefits can contribute 10-12% of your annual earnings to your retirement—at no cost to you—helping your savings grow through compound interest.

For over 60 years, Windings has provided critical custom motors and components for the harshest applications, including outer space, military, downhole drilling, and motor sports to name a few. If you like to take on the “tough stuff”, join us and be part of a forward-thinking, people-focused company driven by our purpose: " Making our Customer’s Critical Mission Possible."

We are hiring a Production Supervisor for our Moorpark, CA location to provide departmental direction and support, using coaching, motivation and supervisory techniques, ensures that teams achieve levels of performance in accordance to the company’s goal. The Production Supervisor continuously seeks process improvement through use of analysis of production methods and controls: Standard Operating Procedures, Best practices, and all other company policies.

What you will be responsible for:

• Lead and enforce safe work practices in compliance with company policies.
• Execute the production schedule by supervising, directing, and prioritizing daily manufacturing and shipping operations.
• Allocate labor, equipment, and materials to minimize downtime and ensure on-time completion of scheduled work.
• Monitor production efficiency, quality, and capacity; track and report downtime by cause and area.
• Support quality objectives and continuous improvement efforts (corrective actions, non-conformances, root cause analysis, 5S, etc.).
• Review production records for accuracy and completeness.
• Approve timecards and manage employee time-off to maintain production coverage.
• Conduct performance reviews, provide ongoing coaching, and address conduct/performance issues per policy in coordination with HR.
• Develop and oversee training schedules; train and mentor production team members and communicate shift priorities/changes.
• Maintain strong communication across employees and leadership; promote teamwork and engagement.
• Manage inventory and replenishment of production supplies.

Requirements

What you need...

• Excellent interpersonal and communication skills (written and verbal).
• Ability to communicate to both management and staff clearly and informatively.
• Demonstrated leadership in team settings.
• Strong decision-making and troubleshooting skills and methods are essential.
• Good organizational and prioritization skills.
• Positive attitude and willingness to provide feedback to help others grow.
• Proficiency with computer operations and programs such as Microsoft Office (Outlook, Word, Excel) Access or other data tracking systems.
• Spanish/English bilingual skills required.

Education:

An Associate’s or Bachelor’s degree is preferred with relevant experience in a production environment. Alternatively, a minimum of 5 years of previous supervisory experience in a production environment or other related environments.

Experience:

Significant experience in a production environment that includes building & sustaining high levels of employee morale, production, quality, and scheduling. Experience in a team-based setting is preferred.

What you will get...

• An awesome employee-ownership culture
• Full benefits package (medical, dental, vision, disability, life and more)
• Paid time off
• 401k match and ESOP contributions
• Flexible work environment
• Education reimbursement

Salary Description:

$75,000 - $90,000 per annual DOQ

We are committed to providing pay ranges for all open positions. Please note that the specific compensation for this role will be determined based on your experience, qualifications, location, and internal equity considerations. The listed pay range is provided in good faith and is subject to adjustments in accordance with company policies and market conditions.

This position is eligible to participate in a performance-based bonus program based on company performance goals. Bonus payouts are not guaranteed and are determined at the company's discretion.

Physical Requirements:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; reach with hands and arms and talk or hear. The employee is frequently required to use hands and fingers to handle or feel; frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. The employee is regularly required to stand and walk. Specific vision ability by this job includes close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.

Other Requirements:

Because employees in this position must handle information covered by the International Trade and Arms Regulations (ITAR) and/or Export Administration Regulations (EAR), successful applicants will be: (1) required to verify their identity and their status as a U.S. citizen or national, U.S. lawful permanent resident, or person granted refugee or asylee status (or equivalent) in the U.S.; OR (2) undergo additional steps, including but not limited to licensure from the Directorate of Defense Trade Controls (DDTC) in the Bureau of Political-Military Affairs at the U.S. Department of State and/or the Bureau of Industry and Security (BIS) at the U.S. Department of Commerce.

Equal Opportunity Employer:

Windings is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to age, sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected Veteran status. We are committed to providing a workplace free of any discrimination or harassment.

*** Sign on Bonus ***

About Means Engineering, Inc.

Means Engineering, Inc., headquartered in Carlsbad, CA, delivers innovative solutions across the medical, industrial, semiconductor, and military sectors.  We combine deep expertise in product development with a relentless commitment to design, function, and quality.

Our team is guided by our core values — Passion, Integrity, Innovation, Quality, and Ethics — ensuring every project meets the highest standards. Join us and be part of a company that values craftsmanship, collaboration, and excellence.

Key Responsibilities:

• Perform advanced-level setup and operation of milling, turning, and grinding machines.
• Troubleshoot and resolve machining issues quickly and effectively.
• Read and interpret blueprints, technical drawings, and job specifications.
• Execute high-precision benchwork and layout activities.
• Edit CNC setup sheets; suggest and implement programming or process improvements.
• Inspect parts to ensure conformance to quality standards and specifications.
• Accurately document work in the ERP system, including job status, time tracking, and nonconformance reports.
• Collaborate with Process Engineering on new product introduction (NPI) and continuous improvement projects.
• Maintain a clean, organized, and safe work environment; follow all company policies and safety

Qualifications:

• Minimum of 7 years of related machining experience.
• Strong English communication skills – able to understand verbal and written instructions, collaborate with team members, and actively participate in meetings and training.
• Math proficiency in algebra, geometry, and trigonometry.
• Exceptional measurement skills with the ability to work within tight tolerances.
• Expertise in reading and interpreting technical drawings, specifications, and quality standards.
• Ability to document quality control requirements clearly and accurately.
• Solid understanding of tooling, equipment safety, and machining best practices.
• A proactive mindset for addressing non-conforming operations and producing accurate, high-quality parts within deadlines.
• Ability to work both independently and collaboratively, with experience mentoring junior team members

How will you make an impact? 
Familiar with technologies specific to area of competence. Can convey technical solutions for areas of competence both to other engineers and to business personnel. Work with engineering team to develop final product solution for chosen architecture within time and cost constraints.

 

What will you do?

• Assist Senior or Lead Design Engineer in the Development and utilization of processes for Electrical Hardware requirement analysis and documentation, Design documentation and requirements management.
• Assist Senior or Lead Design Engineer in providing Document Control with a complete design package consisting of requirements and design documentation, schematics, BOM’s, vendor lists, and conceptual packaging and assembly drawings prior to production launch.
• Participate in elements of design engineering including design reviews and design verification.
• Follow engineering department design flow processes and procedures.
• Provide input to identification and mitigation of technical project risks, technical and integration dependencies affecting overall project plans and schedules.
• Support production discrepancies by incorporating fixes into subsequent revisions in a timely manner.
• · Assigned to projects of diverse scope, where analysis of situations or data requires an evaluation of identifiable factors.
• Comply and follow all procedures within the company security and safety policies
• May perform other duties and responsibilities as assigned.

How will you get here?  

Education:  

Bachelor's degree in electrical engineering or related degree or an equivalent combination of educa

Experience:  

• 2-5 years of electrical engineering in manufacturing.
• Ability to read, interpret, and execute schematics
• Must be able to lead techs and manufacturing personal
• Strong communication and training skills
• Must have experience electrical concepts such as wiring layouts, electrical design
• AutoCAD or SolidWorks

Knowledge, Skills, Abilities:  

• Solid understanding or experience of electronics and circuit design.
• Solid understanding or experience of microprocessors and general digital design.
• Ability to learn high speed circuit board design, design for manufacturability, and performing timing analysis for logic design.
• Familiar or experience with FPGA and CPLDs using VHDL.
• Familiar or experience in schematic entry ECAD tools.
• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
• Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
• Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Ability to operate a personal computer including using a Windows based operating system and related software.
• Advanced PC skills, including training and knowledge of Jabil’s software packages.
• Ability to write simple correspondence. Read and understand visual aid.
• Ability to apply common sense understanding to carry out simple one- or two-step instructions.
• Ability to deal with standardized situations with only occasional or no variables.
• Ability to read and comprehend simple instructions, short correspondence, and memos.
• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
• Ability to compute rate, ratio, and percent and to draw and interpret graphs

What can Jabil offer you?

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:

• Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
• 401K Match
• Employee Stock Purchase Plan
• Paid Time Off
• Tuition Reimbursement
• Life, AD&D, and Disability Insurance
• Commuter Benefits
• Employee Assistance Program
• Pet Insurance
• Adoption Assistance
• Annual Merit Increases
• Community Volunteer Opportunities

Apply Today!

Job Description

LeadStack Inc. is an award winning, one of the nation's fastest growing, certified minority owned (MBE) staffing services provider of contingent workforce. As a recognized industry leader in contingent workforce solutions and Certified as a Great Place to Work, we're proud to partner with some of the most admired Fortune 500 brands in the world.

Senior RTL Design Engineer

Location: Onsite – Folsom, CA

Duration: 6+ months

Hours: 40 hours/week

Pay Range :$90-$95/hr on W2

About the role

Our client is looking for a seasoned Senior RTL Design Engineer to drive architecture, RTL design, and FPGA-based validation for next‑generation high‑speed networking and storage solutions. This role is fully onsite in Folsom, CA.

Key responsibilities

• Define block‑level architecture and microarchitecture features for complex digital designs.
• Create prototypes, develop and simulate RTL models, and derive system requirements.
• Architect and implement multi‑FPGA partitioning solutions for large designs.
• Design, integrate, and debug high‑speed interfaces (Ethernet, PCIe, DDR).
• Apply advanced RTL implementation techniques to meet power, performance, and area (PPA) targets in collaboration with physical design teams.
• Own the FPGA lifecycle: uArchitecture → RTL Design → Physical Implementation → Timing Closure → Simulation Validation → Lab‑based silicon validation.
• Perform trade‑off analysis across cost, size, power, performance, and feature set to optimize customer experience and silicon resources.

Must‑have qualifications

• BE/BS/MS/PhD in Electrical Engineering, Computer Engineering, or Computer Science.
• 10+ years of hands‑on experience in digital architecture and RTL design.
• Strong FPGA RTL development background using VHDL and/or Verilog, including simulation, debug, and static timing analysis.
• Proven experience with RoCEv2 (RDMA over Converged Ethernet): RDMA READ/WRITE, Queue Pair (QP) management, congestion control.
• Solid experience with NVMe‑oF RTL development enabling direct data transfer between host memory and storage targets.
• Deep expertise with high‑speed serial interfaces, especially:
• PCIe Gen4/Gen5/Gen6
• 100G/200G/400G Ethernet MAC/PCS
• Demonstrated ability to debug complex FPGA and silicon issues in lab environments.

Soft skills

• Self‑motivated, independent problem solver who can drive tasks from concept to closure.
• Strong team player who is collaborative, builds relationships across functions, and communicates clearly.
• Innovative and adaptable, comfortable exploring new ideas and working in a fast‑changing environment.

know more about current opportunities at LeadStack , please visit us on Should you have any questions, feel free to call me on (513) 3184502 or send an email on

Vishay manufactures one of the world's largest portfolios of discrete semiconductors and passive electronic components that are essential to innovative designs in the automotive, industrial, computing, consumer, telecommunications, military, aerospace, and medical markets. We help the world's most in-demand technologies come to life. Every day our products touch your life and the lives of people across the world, though you likely do not know it. Come join us and help us build The DNA of tech.™

We are seeking great talent to help us build The DNA of tech.®

Vishay manufactures one of the world's largest portfolios of discrete semiconductors and passive electronic components that are essential to innovative designs in the automotive, industrial, computing, consumer, telecommunications, military, aerospace, and medical markets. We help the world's most in-demand technologies come to life. Every day our products touch your life and the lives of people across the world, though you likely do not know it. Come join us and help us build The DNA of tech.™

Vishay Intertechnology, Inc. is a Fortune 1,000 Company listed on the NYSE (VSH). Learn more at you want to help us build the DNA of tech.? Vishay Thin Film is currently seeking applicants for a 3rd Shift Production Supervisor.

Job Location:

Vishay Thin Film is located in Niagara Falls, NY. The site has a lot of natural beauty to offer including the world-famous Niagara Falls which are just a short drive away!

What you will be doing:

• Direct supervision of Production Process and Personnel
• Administrative responsibilities for Production personnel, including timekeeping, progress review, and corrective counseling
• Monitor, evaluate and interpret data to ensure process integrity and specification compliance
• Monitor and control operation of Production Equipment
• Compile and enter production data records
• Train and develop production staff regarding policies, procedures, and related responsibilities
• Provide accurate and specific data and input to production support departments and personnel
• Meet with scheduling, engineering, and other support departments as needed

What you will bring along:

• B.S. degree or HS diploma with applicable job-related training and experience preferred
• Minimum 3-years of supervisory experience in manufacturing or related production area
• Strong technical background in related production equipment operations
• Safety and Hazardous Materials Awareness training preferred

Pay Range:

$75-80k annually

What can we offer you for your talent:

Vishay offers a comprehensive suite of benefit programs including health care coverage, financial support programs and other resources designed to help you achieve your personal and professional goals. With us, you'll experience unique career paths, an open and collaborative culture, a stable business that will be there for you, and opportunities to work globally and locally.

Do you have the skills we need? Are you ready to power your career as you power the world? If so, apply today.

This position requires access to information subject to the International Traffic in Arms Regulations and/or the Export Administration Regulations. As such, this position is open only to applicants who qualify as “U.S. Persons” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee.”

It is the policy of Vishay to provide equal employment and advancement opportunities to all colleagues and applicants for employment without regard to sex, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

As an equal opportunity employer, Vishay is committed to a diverse workforce. In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants that require accommodation in the job application process may contact assistance

This position requires access to information subject to the International Traffic in Arms Regulations and/or the Export Administration Regulations. As such, this position is open only to applicants who qualify as “U.S. Persons” according to U.S. federal law.

Vishay offers a comprehensive suite of benefit programs including health care coverage, financial support programs and other resources designed to help you achieve your personal and professional goals. With us, you'll experience unique career paths, an open and collaborative culture, a stable business that will be there for you, and opportunities to work globally and locally. Do you have the skills we need? Are you ready to power your career as you power the world? If so, apply today.

Vishay is an AAP and Equal Opportunity Employer

Get to know ChemDAQ

ChemDAQ, Inc., is a rapidly growing, leading-edge technology and manufacturing company based in Pittsburgh, Pennsylvania. The value we bring to the market lies in safeguarding human health, ensuring operational compliance, and optimizing safety practices.

ChemDAQ’s mission is to empower customers to eliminate workplace exposure to toxic chemicals through innovative monitoring and control solutions, industry-leading partnerships, and superior safety expertise. Our patented sensor technologies provide superior chemical monitoring and control products that our customers trust, our employees are proud of, and our partners seek solutions to providing a safer workplace.

Our Core Values – Trust, Innovation, Empowerment, Teamwork, Vision and Loyalty – shape our company culture and guide our daily operations.

To learn more about our growing company, visit you ready to join a company with a strong purpose and a winning culture?

Get to know the opportunity:

Direct Sales Representative – Healthcare

Overview:

The Direct Sales Representative, Healthcare, is responsible for driving revenue growth and exceeding sales goals within a defined territory. This role focuses on understanding customer needs, delivering tailored solutions, and fostering long-term relationships to maximize ChemDAQ’s market presence in healthcare and related industries.

Key Responsibilities

• Develop and Execute Strategy: Contribute to the design and implementation of a comprehensive sales strategy to achieve ChemDAQ’s revenue objectives across hospitals, medical device sterilization, and healthcare supply chain sectors.
• Build Lasting Relationships: Establish and maintain strong, long-term partnerships with customers to ensure satisfaction, loyalty, and retention.
• Deliver Expertise: Provide consultative support and expert guidance to help customers fully realize the benefits of ChemDAQ’s product portfolio.
• Prospect and Expand Business: Identify and pursue new opportunities through market research, disciplined prospecting, cold calling, networking, and participation in trade shows and industry events. (Training provided; mix of company-generated and self-sourced leads.)
• Collaborate Cross-Functionally: Work closely with business development, marketing, account management, and technical services teams to align customer needs with ChemDAQ’s solutions.
• Engage Customers On-Site: Conduct regular visits and presentations to assess challenges, deliver solutions, and introduce new products.
• Support Channel Partners: Assist ChemDAQ partners and independent representatives as needed to achieve mutual sales objectives.
• Monitor Market Dynamics: Stay current on industry trends, competitive activity, and market developments to refine sales strategies and identify emerging opportunities.
• Manage CRM and Reporting: Maintain accurate records in Salesforce, tracking sales activity, forecasting opportunities, and generating reports to support strategic decision-making.

Qualifications & Skills

• Minimum 2 years of successful B2B sales experience; healthcare sales background preferred.
• Willingness to travel 35–50% (approximately) for in-person customer engagement.
• Excellent verbal and written communication skills; proven ability to build and sustain relationships.
• Proficiency in Microsoft Office (Excel, Word, Access).
• Experience with CRM platforms; Salesforce strongly preferred.
• Valid U.S. driver’s license with a clean driving record.
• Self-motivated and disciplined, with the ability to work both independently and as part of a team.
• Committed to delivering a positive, customer-centric experience in every interaction.

Why Join ChemDAQ?

• Competitive Compensation: Base salary plus commission and bonus (Total compensation: $135,000–$150,000+, with uncapped earning potential). All travel expenses, accommodations, and client meals covered.
• Comprehensive Benefits: Health, dental, vision, short and long term disability, life insurance, PTO, and 401(k) with company contribution.
• Professional Growth: Opportunities to develop within a collaborative, innovative environment.
• Meaningful Work: Join a trusted industry leader with a strong reputation among partners and customers.
• Supportive Culture: Be part of a growing team that values integrity, teamwork, and genuine passion for helping customers.

Job Type: Full-time

Benefits:

• 401(k) matching
• Dental insurance
• Disability insurance
• Flexible schedule
• Flexible spending account
• Health insurance
• Life insurance
• Paid time off
• Travel reimbursement
• Vision insurance

Ability to Commute:

• Pittsburgh, PA 15205 (Required)
• Work Location: Hybrid remote in Pittsburgh, PA 15205