Level 5 Basic Pay Jobs Remote Jobs in Usa

Become part of an inclusive organization with over 40,000 teammates, whose mission is to improve the health and well-being of the unique communities we serve.

Labor and Delivery is seeking a skilled and compassionate full time Surgical Technologist to join our dedicated maternity team.

The schedule is 36 hours per week with day/night rotating schedule, including weekends.

This position plays a vital role in ensuring safe, efficient, and high-quality care for mothers and newborns during labor, delivery and recovery.

The L&D Surg Tech is responsible for preparing surgical suites, maintaining sterile field, assisting with C-sections and other obstetrical procedures, and ensuring all instruments and equipment are properly cleaned and handled.

Our Labor & Delivery Unit is a Level III referral center, which provides care to both normal and high-risk laboring and ante partum patients.

Approximately 4,200 babies are born each year at UNC Medical Center.

Several thousand patients are also seen in the triage area.

In addition, our providers and staff perform numerous high-risk procedures such as vaginal and cerclage placements, amniocentesis and versions as well as various fetal procedures, including IUTs, fetal shunt placements and exit procedures.

The unit consists of 15 labor and delivery rooms, 5 triage rooms, a 2-bed recovery room, and 3 operating rooms.

Anesthesia coverage is provided 24/7.

Summary: The Surgical Technologist II works under the supervision of a surgeon and registered nurse to facilitate the safe and effective conduct of invasive surgical procedures, ensuring that the operating room environment is safe, that equipment functions properly, and that the operative procedure is conducted under conditions that maximize patient safety.

Surgical technologists possess expertise in the theory and application of sterile and aseptic technique and combine the knowledge of human anatomy, surgical procedures, and implementation tools and technologies to facilitate a physician's performance of invasive therapeutic and diagnostic procedures.

Performs surgical scrub duties across multiple services.

Serves as a resource in at least one service line.

Responsibilities: Performs all the duties and responsibilities of Level I plus the following: 1.Performs technical skill duties in all operating room specialty service areas, ensuring that proper technical practices are employed according to accepted standards of process.

2.Provides proper maintenance, assembly, handling, and sterilization techniques of specialty instrumentation.

3.Follows aseptic technique.

Proactively identifies contamination and/or breaks in aseptic technique and implements corrective actions.

4.Performs surgical counts.

Follows policies and procedures for incorrect counts and reports discrepancies appropriately.

5.Establishes and maintains sterile field and assures team maintains sterile environment independently.

Labels drugs and solutions; monitors quantities used.

6.Assists in the proper identification, preparation, handling, and labeling of surgical specimens.

7.Actively participates in the planning and set up of instruments, supplies, and surgical drapes in an organized manner to provide optimal accessibility during the procedure.

8.Assists the surgeon, demonstrating an understanding of the patient’s anatomy and abnormalities which affect the surgical procedure.

9.Demonstrates appropriate and correct case preparation.

Assists in picking cases and planning of instrument needs.

Corrects deficiencies at the case level.

10.Recognizes and modifies scrubbing procedures based on pertinent information to develop modifications to standard approaches to care and communicates with the surgical team.

Responds to surgical emergencies and follows hospitalwide emergency management plans.

11.Inventories, receives, and stores supplies under the direction of Surgical Services leadership.

12.Serves as role model for new hires, on the job trainees, and other identified teammates.

Serves as a mentor for Surgical Tech peers and participates in teaching, guiding, and evaluating the performance of peers during orientation and annual review process.

13.Identifies and reports defective instruments, supplies, and equipment.

Assists with restocking operating/procedure rooms and sub-sterile areas.

14.Assists the registered nurse during the intraoperative implementation phase of nursing practice.

15.

Participates in data collection for research projects under the direction of an RN.

16.

Operates complex equipment and other resources in the operating room, troubleshooting as necessary Other Information Other information: Education Requirements: ● High School Diploma or GED Graduate of an accredited Surgical Technology or Nursing Program; or Graduate of a Military Training Program in Surgical Technology; or Formal education/training may be substituted for individuals with 5 years of prior experience as a surgical tech Licensure/Certification Requirements: ● Basic Life Support (BLS) for Healthcare Provider certification Certified Surgical Technologist (CST) through The National Board of Surgical Technology and Surgical Assisting or Tech in Surgery (TS-C) through The National Center of Competency Testing Professional Experience Requirements: ● 3 years Knowledge/Skills/and Abilities Requirements: ● Successful completion of service specific portion of the UNC Health Surgical Technologist competencies.

● Strong communication skills/customer service relations ● Excellent organizational/priority setting skill.

● Ability to function effectively as a mentor & team player ● On-call (May be a requirement depending on the position) Job Details Legal Employer: STATE Entity: UNC Medical Center Organization Unit: Labor & Delivery Work Type: Full Time Standard Hours Per Week: 36.00 Salary Range: $24.73
- $35.56 per hour (Hiring Range) Pay offers are determined by experience and internal equity Work Assignment Type: Onsite Work Schedule: Rotating Location of Job: US:NC:Chapel Hill Exempt From Overtime: Exempt: No This is a State position employed by UNC Health Care System with UNC Health benefits.

If, however, you are presently an employee of another North Carolina agency and currently participate in TSERS or the ORP, you will be eligible to continue participating in those plans at UNC Health.

Qualified applicants will be considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, disability, status as a protected veteran or political affiliation.

UNC Health makes reasonable accommodations for applicants' and employees' religious practices and beliefs, as well as applicants and employees with disabilities.

All interested applicants are invited to apply for career opportunities.

Please email if you need a reasonable accommodation to search and/or to apply for a career opportunity.

Northrop Grumman Aeronautics Systems is seeking a qualified Principal Program Cost Schedule & Control Analyst (Level 3) or Sr. Principal Program Cost Schedule & Control Analyst (Level 4) to join our team of qualified, diverse individuals. This position will be located onsite in Melbourne, FL or Palmdale, CA. An active secret clearance is required to start.

Essential Functions:

This Program Cost Control Analyst position will, under minimal supervision, interface with the program managers, functional management, and cost account managers (CAMs) to provide financial and administrative support and analysis to meet program requirements.

The Program Cost Control Analyst will have experience with Earned Value Management and performance measurement baseline concepts and be able to apply them to multiple contracts for control accounts within an engineering Integrated Product Team (IPT).  This position will be responsible for leading and training other analysts if full level 1 Earned Value contracts.

Earned Value Management (EVM) tasks include:

• Establishing Work Breakdown Structure for execution of budgeted cost of work scheduled

• Assessing and maintaining of objective performance criteria – developing, maintaining, analyzing and justification of estimates to complete

• Supporting internal and external reporting requirements for variance analysis and budgeting baseline

• Maintaining a solid and accurate cost and schedule integration with business partners and program teams

• Analyzing funding, cost risk analysis/assessment and visibility reports - Preparing government cost performance reports and preparation and/or review of Performance measurement variance analysis

Additional responsibilities will include:

Perform analysis & prepare reports in order to ensure that contracts are within negotiated and agreed-upon parameters and government cost control guidelines. Be responsible for supporting the preparation and coordination of the monthly and quarterly financial forecasting and reporting processes. Provide internal reporting requirements to include incorporation of forecast, identification of staffing issues related to baseline/ETC, and execution of corrective action or updates using program reporting tools.  This position will interface with Business Managers and support booking rate files and profitability updates.  Good leadership skills & the ability to work with the Program Office while leading a smaller team are essential.

The successful analyst will possess the following traits and abilities: ability to use financial systems, with understanding of DoD financial rhythms; provide strategic guidance as required; develop and implement solutions of moderate scope and complexity; analyze variances/trends and develop new methods and process techniques; work under very general supervision while completing numerous assignments per schedule and elevating potential issues to ensure proper management focus; exert influence on peers and internal customers; good interpersonal skills while representing the finance team on various projects.

We offer phenomenal learning opportunities, exposure to a wide variety of projects and customers, and a very friendly collaborative workplace. We are looking for self-motivated, proactive, and goal-oriented people to help us grow our services and become even better at what we do. Does this sound like you?

Our Employee Resource Groups (ERGs) provide benefits for the member, our leaders and the company. Our ERGs offer opportunities to be a friend, be active, be a volunteer, be a leader, to be recognized and to be yourself! Every ERG is inclusive of all employees!

At Northrop Grumman, we are innovating-- building the next generation of sophisticated aircraft to protect our country. Our diverse portfolio of programs means there are endless paths to cultivate your career. We are well-known for our inclusive, family environment, as well as our excellent work/life balance. We also offer exceptional benefits/healthcare, a 9/80 schedule, and a great 401K matching program.

Basic Qualifications Level 3:

• Master's degree with 3 years experience or a Bachelor's degree with 5 years of experience in the following areas: business, finance, accounting, program control and/or similar industry related fields.

• Experience with Microsoft Office suite including Excel and PowerPoint

• Experience successfully supporting a monthly financial forecasting rhythm

• Experience with EAC development and analysis

• Experience with MPM and/or Cobra

• Experience with Earned Value Management (EVM)

• Active DOD Secret clearance and Special Program Access required to start

Basic Qualifications Level 4:

• Master's degree with 6 years experience or a Bachelor's degree with 8 years of experience in the following areas: business, finance, accounting, program control and/or similar industry related fields.

• Experience with Microsoft Office suite including Excel and PowerPoint

• Experience successfully supporting a monthly financial forecasting rhythm

• Experience with EAC development and analysis

• Experience with MPM and/or Cobra

• Experience with Earned Value Management (EVM)

• Active DOD Secret clearance and Special Program Access required to start

Preferred Qualifications:

• Experience developing CDRLs (IPMR/IPMDAR/CPR/CFSR/CSDR)

Salary ranges will be dependent upon where the position is based and follows our company geographic salary bands aligned with position, as this posting may include multiple locations and provide a variety of salary ranges per location. Specific salary offer for candidate selected will be commensurate with experience and aligned with local geography.

** Internal Workers – Please log into your Workday account to apply **

Expectations:

‎

‎

‎

‎

‎

‎

‎

Additional individual compensation may be available for this role through differentials, extra shift incentives, bonuses, etc. Base pay is only a portion of the total rewards package, and a comprehensive benefits program is available for qualifying positions.

‎

‎

‎

‎

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. 

Northrop Grumman Aerospace Systems has an opening for a Flight Avionics Electronics Engineer/Principal Flight Avionics Electronics Engineer to join our team of qualified, diverse individuals.  This position will be in Melbourne, FL.

**This position may be filled by either at the Flight Avionics Electronics Engineer level OR at the Principal Flight Avionics Electronics Engineer level based on the qualifications listed.**

The Electronics Engineer will be responsible for supporting the development and execution of the program.  This person will serve as a junior engineer, supporting Avionics Integration of Aircraft flight deck Systems to achieve certification of CNS/ATM capabilities.

 Roles and Responsibilities:

• Provide Avionics Integration engineering support for the integration of aircraft flight deck systems and components including Flight Management Systems (FMS), Flight Management Computers (FMCs), Primary Flight Displays (PFDs), Terrain Avoidance and Warning Systems (TAWS), Crew Alerting System (CAS), Moving Maps, and other various avionics systems.

• Assist in the preparation and support the verification of aircraft avionics and Prime Mission Equipment installations and aircraft certification documents.

• Provide Critical Skills to teams with internal and external knowledge of the technical industry and how it impacts the company. Serves as an expert for Avionics Flight Management Integration.

• Provide support for the development of system safety documents.

• Create aircraft system schematics to support air vehicle wiring diagrams.

• Development and analysis of requirements and supporting trade studies.

• Manage suppliers, review and analysis of supplier design data, definition of functional test requirements including acceptance, qualification, and system integration, and support test execution.

• Informal and formal testing of subsystem requirements in lab, troubleshooting hardware in the lab.

• Supporting flight test activities and post flight data analysis, and resolution of flight test anomalies.

A successful Flight Avionics Engineer has good leadership skills and understands the scope of the work and the impact of the work on other teams. This individual consistently brings up concerns, issues and risks, and holds themselves to a high level of technical rigor.

Basic Qualifications:

Flight Avionics Electronics Engineer (T02):

• Must have a Bachelor’s degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university AND 2 years of related professional/military experience in Engineering; OR a Master’s degree in a (STEM) discipline from an accredited university AND 0 years of related professional/military experience in Engineering; or a Ph.D. (STEM) AND 0 years of related professional/military experience in Engineering.

• Active DoD Secret Clearance

• Ability to obtain and maintain active DoD Top Secret Clearance (interim needed to start)

• Experience with MIL-STD-1553, ARINC 429 and Ethernet communication protocols

Basic Qualifications:

Principal Flight Avionics Electronics Engineer (T03):

• Must have a Bachelor’s degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university AND 5 years of related professional/military experience in Engineering; OR a Master’s degree in a (STEM) discipline from an accredited university AND 3 years of related professional/military experience in Engineering; or a Ph.D. (STEM) AND 0 years of related professional/military experience in Engineering.

• Active DoD Secret Clearance

• Ability to obtain and maintain active DoD Top Secret Clearance (interim needed to start)

• Experience with MIL-STD-1553, ARINC 429 and Ethernet communication protocols

Preferred Qualifications:

• Communication, Navigation, Surveillance/Air Traffic Management (CNS/ATM) experience

• Experience with system modeling and requirements management tools (Cameo, DOORS, Rhapsody, etc.), developing/maturing requirements, and tracing requirements through various levels

• Experience with Supplier Management of avionics equipment

• Experience with at least one of the flight certification standards listed in the preferred qualifications (PBN, RNAV, RNP, CNS/ATM, DO-178/254/200/160)

• Performance Based Navigation (PBN) experience and attaining PBN certification

• Required Navigation Performance (RNP)/ Area Navigation (RNAV) certification experience

• Experience designing to RTCA DO-178 software standard for RNP RNAV certification

• Experience designing to RTCA DO-254 hardware standard for airborne electronic systems

• Experience designing to RTCA DO-200 standard for processing aeronautical data

• Experience designing to RTCA DO-160 and MIL-STD-810 standards for environmental qualifications

• Confluence and Jira Experience

Overview

Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech

Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values

Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:

1. Students are our top priority.

2. We strive for excellence.

3. We thrive on diversity.

4. We celebrate collaboration.

5. We champion innovation.

6. We safeguard freedom of inquiry and expression.

7. We nurture the wellbeing of our community.

8. We act ethically.

9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

Perform basic installation and maintenance of components used in campus heating, ventilation and air conditioning (HVAC) systems and related equipment including chilled water, refrigeration, air compressor, gas heater, air drier, fume hoods, and pumps. Assignments typically require HVAC journeyman level skills. This position will interact with on a consistent basis with: maintenance supervision and staff, building managers and vendors. This position typically will advise and counsel: maintenance workers. This position will supervise: NA

Job Duty 1 -
Install, repair, replace, operate, maintain, calibrate, test, and troubleshoot mechanical, electrical, and plumbing component used in HVAC.

Job Duty 2 -
Perform preventive maintenance on HVAC equipment.

Job Duty 3 -
Troubleshoot pneumatic, electrical, and digital controls.

Job Duty 4 -
May require purchase and accounting for HVAC related parts and materials.

Job Duty 5 -
May require working with specialized computer applications.

Job Duty 6 -
Perform other duties as assigned

Educational Requirements
High school diploma, GED Certificate or Vocational School Diploma

Required Experience
Two years of job related experience

Additional Preferred Qualifications
State of Georgia Unrestricted HVAC License

Preferred Educational Qualifications
Technical Diploma, Associate's Degree or two years college course work

SKILLS
This job requires journeyman level knowledge and skills for installing and maintaining compressors, fans, bearings, belts, dampers, motors, starters, controls, 208, 200, and 460 service, 24 volt-DC service, coils and piping. Position requires the ability to read prints, drawings, and schematics via paper copies and computerized software systems. In addition, the job requires ability to operate machine tools, motor vehicles (may include forklift), hand/power tools, and hydraulic/pneumatic equipment. The position requires the ability to troubleshoot and to sequence tasks for specific assignments.

The University System of Georgia is comprised of our 25 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia ("USG") and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individual's race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

This is not a supervisory position.
This position does not have any financial responsibilities.
This position will be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel
This position does not require security clearance.

Job Grade: C7
Pay Range $21.20/hr -$28.83/hr
Salary will commensurate with experience and education
Location: Atlanta, GA

Shift Monday - Friday 7:55am to 4:25pm

Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening

Altorfer Agriculture facility has partnered with local community colleges to combine real-world experience through internship while being in school.

Altorfer Agriculture facility has partnered with local community colleges to combine real-world experience through internship while being in school. Work with experienced Agriculture Technicians to gain hands on experience on Fendt, Massey, Challenger tractors, RoGator and TerraGator application equipment, and Lexion combines.

• Currently enrolled in a junior college with an above average grade point & a drive for a career in Agriculture.
• Credentials including being a self-starter with good time management, planning & organizational skills, team oriented and commitment to detail recommended.
• Must be able to lift 70lbs.
• Basic computer skills with programs such as Microsoft Word, Excel, and Outlook.
• Must have or will be receiving a High School Diploma or equivalent.
• Willingness to work overtime and some weekends when needed.
• Must have a valid driver's license with clean driving record. This includes no more than 2 minor violations within the past 3 years and no major violations within the past 5 years (Motor Vehicle Report will be performed on final candidate).

This position works in a shop/warehouse environment. May on a continuous basis walk, bend and lift up to 70lbs. May be required to wear appropriate safety equipment (IE- Safety glasses or side shields) when needed. The noise level in the work environment is usually moderate to high. May intermittently sit at a desk for a period of time to answer telephone and write or use a keyboard to communicate through email. Must be flexible to work varying schedules and hours as needed. Occasional travel may be required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Why Work for Altorfer?

At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is critical to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with.

• Perform in shop service and repairs at our West Branch, Iowa location.
• Focusing primarily on Terragators, Rogators, Spra Coupe, Cat Lexion Combines, Challenger tractors and other Cat AG products.
• Troubleshoot and repair hydraulic, electrical and all other systems.
• May perform other related duties as requested and/or assigned.

• Successful completion of a formal technical training program preferred or 2 years of AG machinery knowledge and experience required.
• Electrical and hydraulic diagnostic and troubleshooting skills needed.
• Basic computer skills are needed especially with programs such as Microsoft, Excel, Outlook and CAT Programs.
• Must have knowledge and previous experience working with parts books.
• Possess good communication skills and able to lift 75 lbs.
• Willingness to work overtime and some weekends when needed.
• Must be able to work in a fast paced environment, be a self-starter and able to adapt to change.
• High School Diploma or equivalent is required.
• Must have a valid driver's license with clean driving record. This includes no more than 2 minor violations within the past 3 years and no major violations within the past 5 years (Motor Vehicle Report will be performed on final candidate).

This position works in a warehouse/shop environment. May on a continuous basis walk, bend and lift up to 75 lbs. May be required to wear appropriate safety equipment (IE- Safety glasses or side shields) when needed. The noise level in the work environment is usually moderate to high. May intermittently sit at a desk for a period of time to answer telephone and write or use a keyboard to communicate through email. Must be flexible to work varying schedules and hours as needed. Occasional travel may be required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Why Work for Altorfer?

At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is crucial to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with.

• Perform basic maintenance, diagnosis, and repairs on customer owned construction and aerial work platform equipment.
• Establish and maintain service-oriented working relationship with customers
• Pick-up and delivery of equipment when necessary.
• Answer calls and questions that customers have
• Provide excellent customer service to all customers.
• Complete service reports and all other paperwork before and after repairs are made
• May perform other related duties as requested and/or assigned.

• Successful completion of a formal technical training program preferred or a minimum of 2 years of previous related work experience required.
• Knowledge/clear understanding of gas and diesel engines, hydraulic and electrical systems.
• Automotive and Industrial Maintenance Technicians encouraged to apply.
• Computer literate and proficient with programs such as Microsoft Word, Excel, Access and Outlook required. Knowledge of DBS preferred
• Ability to write professional business communication when sending emails, letters, notes, and documenting is required.
• Must be a self-starter, well organized and able to work in a fast paced environment.
• Excellent customer service skills are needed.
• Must be able to lift 75 lbs, bend, twist, and climb.
• Must possess a valid driver's license with clean driving record. This includes no more than 2 minor violations within the past 3 years and no major violations within the past 5 years (Motor Vehicle Report will be performed on final candidate)

This position works the majority of time in the equipment shop. May on a continuous basis walk, bend and lift up to 75 lbs. At times you may be required to move/operate equipment to figure out what maintenance needs to be performed. The noise level in the shop environment is usually moderate to high. This position also spends a portion of time in an office environment. May, sit at desk for a long period of time; intermittently answer telephone and write or use a keyboard to communicate through written means. Must be flexible to work Saturdays and overtime as needed. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Why Work for Altorfer?

At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is crucial to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with.

• Laterals receive a $20,000 sign-on bonus paid in two increments
• Laterals receive 250 hours of personal leave available upon employment
• Laterals accrue paid personal leave time hours (a combination of holiday and vacation) each pay period beginning with the first day of employment:
  • 0-5 years of service = 19/month
  • 6-10 years of service = 23/month
  • 11-15 years of service = 24/month
  • 16-20 years of service = 26/month
  • 21+ years of service = 28/month
• Laterals receive 250 hours of sick leave available upon employment

• The potential salary amount based on base pay and 6% education premium listed below is: $110,015 - $135,773.
• Education Premium of 4% for an Associate Degree or 6% for a Bachelor's or Master's.
• City contributes 1% of base wage towards deferred compensation plan. An additional 3% is available for passing the annual Physical Fitness Test.
• City contributes 3% into a Health Reimbursement Arrangement (HRA) VEBA Plan.
• A 3% interpreter premium is available post academy.
• Take Home Car Program: Officers are issued a take home vehicle after completion of FTO.
  

WE'RE HIRING

Renton Police Department

Core Values:

Integrity, Service, Valor, and Professionalism

About the City of Renton:
The City of Renton embraces a diverse and inclusive workforce and prides itself on promoting collaboration and teamwork in a positive environment while providing high quality services to the community.

Renton, with a population of 108,800, is located on the southeast shore of Lake Washington, just south of Seattle. Renton's strong economic base, diverse marketplace and favorable business climate have attracted the attention of nationally recognized companies that are providing employees and their families an outstanding quality of life. Renton is the home of Boeing, PACCAR, IKEA, the Sounders and the Seattle Seahawks.

The Renton Police Department is a full-service law enforcement agency with 176 personnel, comprised of 141 commissioned officers and 39 non-commissioned. It is our mission, through collaboration, to provide professional and unbiased law enforcement services to our community. Our officers work diligently, in partnership with the public, to protect life and property, the suppression of crime, apprehension of criminals and enforcement of laws. We fulfill our commitment to the community with pride, while adhering to our core values of: Integrity, Service, Valor and Professionalism.

JOB SUMMARY:

Perform general duty police work involving the protection of life and property; the enforcement of laws and ordinances; prevention and investigation of crimes and maintenance of order and positively engage with community members on an assigned shift. Work is performed independently and as part of a team. Tasks are completed with general guidelines and require independent judgment. Contribute to the Department and City's vision, mission, and goals in the performance of all job duties.

SUPERVISION:

Reports To: Police Sergeant

Supervises: None

ESSENTIAL FUNCTIONS:

• Contribute to an environment of respect and teamwork.

• Foster a culture of equity and inclusion by recognizing the diverse needs and perspectives of groups and individuals.
• Respond to emergency and routine dispatched calls as directed.
• Patrol the City on an assigned shift in a police vehicle, on a motorcycle, bicycle, or on foot; patrol business and residential districts occasionally on foot to provide an element of safety by obvious visibility; look for crimes or potential crimes in progress.
• Answers 911 calls and complaints involving criminal and noncriminal activities.
• Administers emergency first aid to injured or incapacitated persons as required.
• Stop traffic violators, identify suspicious individuals, and take appropriate lawful action; apprehend violators or offenders of the law, sometimes involving a substantial element of personal danger and lawful, reasonable use of physical force.
• Use de-escalation techniques to increase likelihood of compliance.
• Utilize and maintain a variety of specialized equipment such as firearms, police vehicles, radios, batons, handcuffs, pepper spray, Conducted Energy Weapon (CEW) breath testing equipment and others according to established procedures; maintain skill and proficiency in driving, the use of firearms, and other issued weapons
• Enforce all applicable laws.
• Manage situations professionally with respect for the rights of others.
• Accountable for actions and dealing with violations of rules, policy, or procedures on an impartial basis.
• Maintain a high standard of physical fitness.
• Search for lost or wanted persons.
• Direct traffic when required.
• Determine when a lawful search or arrest can or should be attempted; determine when physical force should be used on an individual and the extent of such force as governed by state law or department policy.
• Develop knowledge about known offenders and correlate reported offenses; recover lost or stolen property; prepare affidavits and search warrants; interview witnesses and suspects; use informants and other investigative aids.
• Appear in court to present evidence and to testify against persons accused of crimes.
• Write police and other related reports.
• Provide assistance and direct citizens to appropriate resources as necessary.
• Take direction from a police supervisor.
• Participate in community engagement activities including attend community events and meetings, and conduct business checks
• Participate in training programs as required.
• Remain current with legislation, court rulings, department policy, and relevant technological advancements as it relates to assignment.

• Maintain regular, reliable, and punctual attendance.
• Perform related work as required.

EDUCATION, EXPERIENCE, AND LICENSE REQUIREMENTS:

• High school degree or equivalent
• Not less than 21 years of age at the time of examination
• Ability to read and write the English language
• Lawful permanent resident or US citizen
• Ability to pass entrance examination successfully and meet the minimum medical and health standards adopted by the Civil Service Commission
• Valid Washington State driver's license by date of hire
• Stringent personal background investigation including:
  • Polygraph examination
  • Psychological evaluation
  • Medical physical, including a drug-screening test
  • Driving record check.
• Must be able to qualify for the ACCESS Certification

POLICE OFFICER - LATERAL:

• At least 12 months experience, within the last 36 months, as a full-time, paid, commissioned Police Officer.
• The 12 months of experience will be waived if the applicant has successfully completed a state law enforcement academy that is recognized by the Washington State Criminal Justice Training Commission (WSCJTC) and was released due to budgetary constraints and eligible for rehire by that former agency.
• Lateral Police Officers with experience in Washington state must have successfully passed a WSCJTC Basic Law Enforcement Academy or its equivalent recognized by the WSCJTC.
• Lateral Police Officers with experience not attained at an agency in Washington State are required to pass the WSCJTC Basic Law Enforcement Equivalency Course.

COMPETENCY REQUIREMENTS:

• Commitment to racial, social and economic equity issues and working effectively with people from diverse backgrounds and cultures.
• Knowledge of adult and juvenile judicial procedures and the criminal justice system and laws of arrest, search, and seizure.
• Techniques of investigation and interrogation.
• Criminal case preparation and procedures.
• Analyze situations accurately and adopt an effective course of action.
• Maintain control in stressful and hazardous situations.
• Enforce all applicable laws with professionalism and respect.
• Determine level and scope of police response.
• Make rapid and accurate decisions under stressful conditions.
• Attention to detail.
• Communicate effectively.
• Customer service focus.
• Positive interactions with all individuals.
• Build collaborative relationships.
• Anticipate problems and develop contingency plans.
• Show initiative while performing job tasks.
• Remain flexible to changing priorities.
• Determine priorities and take prompt action.
• Meet deadlines and respond timely to achieve common goals.
• Be receptive to the attitudes, feelings or circumstances of others and aware of influence of one's own behavior on them.
• Work effectively with others to achieve common goals.
• Social awareness.
• Make difficult decisions in a timely manner.
• Conflict-resolution skills.
• City ordinances, applicable federal and state laws, WAC rules and department policies.
• Knowledge of geography and street locations.
• Knowledge of department's policies and procedures.

PHYSICAL DEMANDS:

• Drive and perform field work.
• Work in dangerous or emergency circumstances requiring vigorous physical activity and exertion.
• Lift or move items weighing up to 20 pounds on occasion.
• Lift heavy objects in awkward and confined spaces, using proper lifting and rigging techniques.
• Climb and work from ladders, climb stairs, ability to navigate a variety of different terrains.
• Run, jog, or walk for extended periods of time.
• Bending, stretching, sitting, and standing for extended periods.

WORK ENVIRONMENT:

• Work is performed in a typical office environment and/or performed outdoors in all weather conditions and may involve moving throughout the facility and community.
• Work assigned shift.
• Noise level out in the field is moderately loud and noise level in the office is moderately quiet.

Accommodation
Individuals needing accommodation in the application, testing, or interview process may contact at least 2 days prior to the need.

An oral board interview may be scheduled for the top qualified candidates. Candidates must obtain a 70% passing score in the oral board to be placed on the eligibility list. Veterans and Language Preference Points are awarded to eligible candidates who make the request and include the proper qualifying documentation after successfully passing an interview.

Communication from the City of Renton:
We primarily communicate via e-mail during the application process. Texting notifications are available. E-mails from and/or should be placed on your safe domain list to ensure you receive notifications in a timely manner. As a precaution, you may also want to check your junk e-mail folders.

The Production Packaging Supervisor - 3rd Shift leads and coordinates the activities of their shift to realize production targets. This includes assisting with all material supply in line with Production/Packaging plan to ensure smooth, uninterrupted operations and supporting any other operational areas needs. The ideal Production Packaging Supervisor - 3rd Shift, will have 5+ years of manufacturing experience, a minimum of 2+ years in a supervisory or management level position, and at least 1 or more years of experience working in food manufacturing or pharmaceutical manufacturing plant.

Responsibilities:

• Manage the staffing process to ensure colleagues have the training and education necessary to build the job-related skills needed to perform all required duties, safely and effectively, meeting HARIBO's high standards
• Promote and maintain good employee relations on the line, both personally and with the Team Leads and extended teams. Lead the team leads and extended team by providing coaching and counselling in conjunction with regular reviews and training, to maintain a high morale on the line
• Work with, collaborate and cooperate with the Maintenance Planner and Production Planner to ensure delivery commitments are achieved. Ensure trials, changeovers and maintenance work is planned and completed on time and does not conflict with production schedule attainment. Investigate problems resulting in attainment misses and implement corrective actions
• Monitor line performance and ensure output, labor and material yield standards are achieved
• Ensure Product and Performance data is available and accurate at all times. Prepare KPIs and reports for use at the Daily Management System meetings, and to communicate performance to the Site Leadership team and Line teams
• Other duties as assigned

Qualifications:

• Must be available to work 3rd shift production schedule
• High School Diploma or equivalency (GED,HSED) required
• Minimum of 5 Years of Manufacturing Experience preferred in a non-union environment
• Minimum of 2 Years of Supervisory or management experience is required
• Excellent Communication Skills (Verbal and Written)
• Available to work flexible hours and days as needed to meet business demands
• Strong decision-making, problem solving, and organizational skills are required
• Ability to train others and coach to compliance

Preferred Qualifications:

• Bachelor's Degree preferred
• Computer proficiency (MS Word, Excel, SAP, and LMS) systems preferred
• Basic knowledge of Industrial Maintenance and manufacturing equipment
• Possess a basic Financial Understanding to ensure results are delivered. Demonstrates strong problem-solving skills
• Prior experience with high-speed packaging equipment in food/pharma manufacturing
• Prior experience using SAP in a manufacturing environment
• TPM and/or Lean manufacturing experience is preferred

Target Hiring Pay Range: $75,000 - $90,000 annually
This pay range represents the min/max target annual base salary range HARIBO of America, Inc. may pay for this position at the time of this posting. Please note, a candidate's offered annual salary will be determined by a variety of factors, including but not limited to, the candidate's relevant education, experience, qualifications, skills, internal equity, and the geographical location of the role. In addition to the base salary, HARIBO of America, Inc. offers a comprehensive benefits package to support the well-being of our associates and their families. HARIBO of America, Inc. is committed to fair and equitable pay practices and complies with all applicable federal, state, and local laws regarding pay transparency.

HARIBO of America, Inc. is an Equal Employment Opportunity Employer and maintains a Drug-Free Workplace. Employment at HARIBO of America, Inc. is subject to post offer, pre-employment drug testing. The Company's policy is not to discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, including protected veteran status, genetic information or any other basis protected by applicable federal, state, or local laws. HARIBO also prohibits harassment of applicants or employees based on any of these protected categories. It is also HARIBO's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.

HARIBO is committed to recruiting, hiring and promoting people with disabilities and veterans. If you need an accommodation to assist with completing the electronic application, please contact the location for which you are applying and ask to speak with the human resources representative or email .