Layerzero Power Systems Jobs in Usa

General Summary of Position
Oversees the operation of the Boilers and Chiller Plant and associated equipment ensuring the efficient operation during assigned shift. May be required to lead or assist with regular maintenance or emergency repairs to the boilers chillers and/or related equipment.

Primary Duties and Responsibilities

• Oversees/monitors the operation of the Chiller Plant during assigned shift. Ensures the systems are operating at best possible performance levels.
• Performs regular maintenance/repairs to the Chiller Plant such as appropriate during shift reporting larger/ more complicated needs to the Forman or Power Plant Engineer I for action by the maintenance crew.
• Assists the maintenance/repair crew with scheduled and emergency repairs to the boilers generators chillers and related Facilities Management equipment.
• Ensures that assigned areas are operating within all applicable Hospital federal and local governing codes standards and regulations including but not limited to: OSHA NFPA The Joint Commission and Fire and Life Safety practices.
• Learns and remains current with the latest applicable federal and local governing codes standards and regulations regarding fire safety plumbing electrical and plant operations including but not limited to: OSHA NFPA The Joint Commission ASHRAE ANSI DCRA D.C. Fire & Safety Codes and the Hospital's Fire and Life Safety practices.

Minimal Qualifications
Education

• High School Diploma or GED required or
• Trade/vocational school graduate or equivalent with courses in chemistry physics and/or mathematics and such training as to be able to read: layout diagrams blueprints mechanical drawings work sketches etc. preferred

Experience

• completion of an approved apprentice training program required

Licenses and Certifications

• Must have a current D.C. Third Class Operating License required and
• current CFC License. required

Knowledge Skills and Abilities

• Familiarity with the latest applicable codes standards and regulations including but not limited to: OSHA NFPA The Joint Commission and Fire and Life Safety practices.

General Summary of Position
Oversees the operation of the Boilers and Chiller Plant and associated equipment ensuring the efficient operation during assigned shift. May be required to lead or assist with regular maintenance or emergency repairs to the boilers chillers and/or related equipment.

Primary Duties and Responsibilities

• Oversees/monitors the operation of the Chiller Plant during assigned shift. Ensures the systems are operating at best possible performance levels.
• Performs regular maintenance/repairs to the Chiller Plant such as appropriate during shift reporting larger/ more complicated needs to the Forman or Power Plant Engineer I for action by the maintenance crew.
• Assists the maintenance/repair crew with scheduled and emergency repairs to the boilers generators chillers and related Facilities Management equipment.
• Ensures that assigned areas are operating within all applicable Hospital federal and local governing codes standards and regulations including but not limited to: OSHA NFPA The Joint Commission and Fire and Life Safety practices.
• Learns and remains current with the latest applicable federal and local governing codes standards and regulations regarding fire safety plumbing electrical and plant operations including but not limited to: OSHA NFPA The Joint Commission ASHRAE ANSI DCRA D.C. Fire & Safety Codes and the Hospital's Fire and Life Safety practices.

Minimal Qualifications
Education

• High School Diploma or GED required or
• Trade/vocational school graduate or equivalent with courses in chemistry physics and/or mathematics and such training as to be able to read: layout diagrams blueprints mechanical drawings work sketches etc. preferred

Experience

• completion of an approved apprentice training program required

Licenses and Certifications

• Must have a current D.C. Third Class Operating License required and
• current CFC License. required

Knowledge Skills and Abilities

• Familiarity with the latest applicable codes standards and regulations including but not limited to: OSHA NFPA The Joint Commission and Fire and Life Safety practices.

Field Superintendent

We have an immediate opportunity for an experienced Construction Field Superintendent with Underground Power experience in the Los Angeles area. Ability to complete construction projects by performing the following duties personally or through subordinate supervisors, field staff, and sub-contractors.

Essential Functions/Responsibilities:

• Directly oversees job site personnel and subcontractors engaged in planning and executing work schedules and coordinating various phases of construction to prevent delays
• Works with Project Manager and Scheduler in the development and refinement of the project schedule to keep the schedules properly updated and see that the job meets the completion date while meeting budget
• Responsible for approving all expenses for each assigned job; ensure they are applied to the proper job and phase code
• Studies specifications to plan procedures for construction on basis of starting and completion times
• Orders procurement of tools and materials to be delivered at specific times to conform to work schedules
• Inspects work in progress to ensure that workmanship conforms to specifications and the adherence to construction schedules
• Prepares or reviews reports on progress, materials used, costs and adjusts work schedules as indicated on reports
• Completes Daily Field Production Reports on a daily basis
• Monitors contract compliance for each job to ensure the company is protected regarding liabilities matters and liens
• Required to participate in resolving labor disputes and related negotiations are required
• Responsible for obtaining signed change orders when appropriate and submitting to their Managers and Accounting for processing
• Provide directions to the A/R department to ensure invoices are properly and timely created
• Ensures company employees and subcontractors are adhering to the company safety policy

Qualifications and Experience

• Four-year degree in Engineering, Construction Management, or Business Administration preferred
• 10 plus years of Construction knowledge and experience working in the capacity of a General Foreman or Superintendent in Underground Utility Installation
• Identifies and resolves problems in a timely manner; gathers and analyzes information skillfully; develops alternative solutions; works well in group problem solving situations; uses reason even when dealing with emotional topics
• Writes clearly and informatively; edits work for spelling and grammar; varies writing style to meet needs; presents numerical data effectively; able to read and interpret written information
• Manages difficult customer situations; responds promptly to customer needs; solicits customer feedback to improve service; responds to requests for service and assistance; meets commitments
• Speaks clearly and persuasively in positive or negative situations, listens and gets clarification, and responds well to questions
• Current First Aid/CPR/AED, company willing to certify
• OSHA 30 certification a plus, company willing to certify
• Proficient with Microsoft Office and other basic computer skills
• Excellent communication skills and ability to work well with others
• Southern California Edison experience required

Must be able to pass a drug and background

Valid California driver’s license

Benefits and company vehicle provided

(Superintendent, General Foreman, Excel, Underground Utilities, Edison, Transmission, Distribution, SCE)

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression.  We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.  Our team solves tough, meaningful problems that create a safer, more secure world.

The Advanced Airborne RF Sensors department within the Space and Airborne Systems Engineering and Test Capability (SE&TC) Center is seeking a Systems Engineer to join our team in North Texas. As a Systems Engineer, you will play a critical role in the integration, testing, and verification of advanced hardware and software systems. You will ensure our products meet customer requirements and perform to expectations, from initial development through deployment and post-deployment support. This dynamic role offers the opportunity to collaborate across disciplines, solve complex challenges, and contribute to cutting-edge aerospace and defense technologies. This is an Onsite role in McKinney, TX.

What You Will Do:

• Collaborate with hardware and software teams to develop test procedures and
• troubleshoot system level issues for RF and EW systems.
• Perform calibration and operation of phased array antennas within a laboratory test‑range environment.
• Support testing, validation, and integration activities for phased array antenna systems, RF sensor, and EW systems.
• Conduct modeling, simulation, and analysis to evaluate ES/EA system performance and inform design decisions.
• Create and execute test plans and procedures, evaluate system functions and interfaces, and verify system requirements in preparation for final system sell-off to the customer.
• Support production, system deployment, and post-deployment activities, ensuring product performance and reliability.
• Collaborate across hardware and software disciplines to identify and implement solutions to complex system challenges.
• Engage in Digital Transformation (DTx) efforts, leveraging methods and enabling technologies such as Model-Based Systems Engineering (MBSE) and Agile product development practices.
• Work alongside teams of engineers to support integration and testing efforts, ensuring seamless functionality of system components.
• Utilize laboratory equipment, including power supplies, oscilloscopes, and digital voltmeters.
• Test event support activity may require travel which is not expected to exceed 20%. 

Qualifications You Must Have:

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 5 years of EW/Radar systems design and requirements engineering experience.
• Diagnose and resolve electromagnetic interference (EMI) issues.
• Modeling and simulation for Electronic Warfare (EW) or radar systems.
• Experience with calibrating, operating, and supporting the integration of phased‑array or RF sensor systems.

Qualifications We Prefer

• Active DoD clearance with investigation within five years.
• Advanced degree in Science, Technology, Engineering or Mathematics (STEM preferred).
• Model Based Systems Engineering (Cameo Enterprise Architecture (SysML specifically), digital thread concepts, digital engineering, MBSE with DevSecOps).
• Antenna design and calibration experience
• Skilled in diagnosing and resolving electromagnetic interference (EMI) issues.
• Experience with modeling and simulation of EW or radar systems.
• Matlab/Simulink, DOORS, DNG, Cameo, Jira, and Confluence.

What We Offer:

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Eligible – relocation assistance available for this position 

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
• McKinney, Texas: Raytheon North Texas Location

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Millennium Space Systems, a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space.

Our missions have direct impact to global security, like missile warning and Earth observation.

Our team is curious, bold and innovative.

We take risks, innovate and explore new techniques and technologies.

We influence change because we challenge the status quo.

And when we watch our satellites launch, we know each one of us made it happen.

As an Senior Spacecraft Systems Engineer, you will be responsible for owning the technical execution for programs and leading teams developing spacecraft systems serving a range of missions and customers.

This includes creating, monitoring, and guiding requirements definition, spacecraft design, procurement and fabrication, integration and test, and verification and validation of the overall space vehicle system.

You will interact with subsystem and unit engineers, manufacturing and test personnel, and program management.

You will manage the technical elements of the space vehicle system.

Our spacecraft systems engineers create spacecraft not just paperwork! This position's internal job code is Systems Engineer.

Our team is currently hiring for Levels 5-6.

Position Responsibilities: Provides systems engineering leadership to programs Provides mentorship to junior systems engineering and subsystem staff Collaborates with program and financial leadership to ensure successful programmatic execution Applies an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced solution for space systems Understands spacecraft subsystems functions and interfaces.

Develops integrated spacecraft system designs and solutions Responsible for all aspects of spacecraft systems engineering including performing preliminary concept development, trade studies, CONOPS definition, requirements decomposition and allocation, interface requirements definition, requirements verification and validation, support to integration and test operations, anomaly resolution, risk management, and schedule execution Coordinates and communicates with subsystem engineering teams to ensure system execution Develops the planning organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes Applies model-based systems engineering techniques for the definition of the spacecraft system Participates in software integration and test activities to ensure mission functionality prior to deployment into operations Coordinates with management and peers to ensure the integrity of high-quality operational products, including procedures, tools, and system configuration Performs tasks to analyze technical data, verify and sustain specific systems configurations in accordance with defined constraints and operational requirements Performs various analyses to optimize the spacecraft system and/or system architecture Resolves cross-functional technical issues Develops and improves systems engineering processes Basic Qualifications (Required Skills/Experience): This position requires the ability to obtain a U.S.

Security Clearance.

for which the US Government requires U.S.

Citizenship.

A final U.S.

Top Secret security clearance is required post start.

Bachelor's Degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), computer science, engineering data science, mathematics, or physics and 14 or more years' related work experience; Master's Degree in engineering related discipline and 12 or more years' related work experience; or an equivalent combination of technical education and experience.

14 years' experience with space systems engineering principles and techniques Experience with power, mass, and other system budgets Experience with requirements analysis and flow-down Experience with design verification and validation processes Experience with configuration management Experience with satellite level integration and test processes Experience with satellite in-orbit operations Preferred Qualifications (Desired Skills/Experience): Master's Degree in Aerospace or other relevant engineering or science discipline Greater than 18 years professional experience in space systems engineering Demonstrated familiarity with program management principles and tools Direct experience with one or more rapid spacecraft development programs and missions.

Experience with a full life-cycle from concept to in-orbit operations Demonstrated leadership and communications skills An active TS/SCI U.S.

Security Clearance.

Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process Drug Free Workplace: Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Total Rewards: At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Level 5: $146,000
- $260,000 Level 6: $174,000
- $310,000 Millennium is DDTC-registered, ITAR-compliant Company.

This position is located at a facility that requires special access.

Applicants MUST be U.S.

citizens and eligible for a security clearance.

Additionally, applicants must be willing to apply for and maintain a security clearance.

We encourage all interested candidates to apply for any open position for which they feel they are qualified.

Applications for this position will be accepted until May.

31, 2026 Export Control Requirements: This position must meet U.S.

export control compliance requirements.

To meet U.S.

export control compliance requirements, a “U.S.

Person” as defined by 22 C.F.R.

§120.62 is required.

“U.S.

Person” includes U.S.

Citizen, U.S.

National, lawful permanent resident, refugee, or asylee.

Export Control Details: US based job, US Person required Relocation Relocation assistance is not a negotiable benefit for this position.

Security Clearance This position requires the ability to obtain a U.S.

Security Clearance for which the U.S.

Government requires U.S.

Citizenship.

An interim and/or final U.S.

Top Secret/SCI Clearance Post-Start is required.

Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Description

Reporting to the General Manager the IT Manufacturing Systems Analyst will help to support and optimize our manufacturing operations through effective use of our information technology systems. This position will be responsible for analyzing, designing, implementing and supporting IT systems critical to our production environment, ensuring efficiency, accuracy, and data integrity.

This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time:

• Serve as a primary point of contact and subject matter expert for IT-related issues and projects within the manufacturing environment.
• Work with stakeholders to understand business goals and accordingly plan system roadmap and strategy.
• Collaborate with manufacturing, engineering, quality, and other cross-functional teams to understand their business needs and translate them into technical requirements.
• Analyze existing manufacturing systems and processes to identify areas for improvement, optimization, and automation.
• Participate in the selection, implementation, and configuration of new manufacturing systems, including ERP, MES, PLM, and other related applications.
• Manage relationships with vendors for new and existing software to optimize existing functions and identify new IT solutions that continue to meet the needs of the business.
• Act as a liaison between business groups and IT teams to discover, plan and coordinate IT projects and enhancements.
• Develop and maintain system documentation, including process flows, configurations, and user guides.
• Provide technical support and troubleshooting for manufacturing systems, resolving issues in a timely and effective manner.
• Assist in the development and execution of test plans for system implementations, upgrades, and modifications.
• Participate in training end-users on manufacturing systems and processes.
• Ensure data integrity and security within manufacturing systems.
• Develop and generate reports and dashboards to provide insights into manufacturing performance and identify trends.
• Contribute to the development and implementation of IT policies and procedures within the manufacturing context.
• Manage small to medium-sized IT projects related to manufacturing systems.
• Ability to work in a global team environment and coordinate with multiple IT teams as needed.
• Ability to learn and research to keep up with software trends and product releases in manufacturing industry to identify automation and process improvement opportunities

Requirements

Education:

Bachelor’s degree in information technology, Computer Science, Engineering, or a related field. Equivalent experience may be considered.

Experience:

• Minimum of 3 years of experience working as a Systems Analyst or in a similar IT role within a manufacturing environment.
• Strong understanding of manufacturing processes, such as production planning, shop floor control, quality management, and supply chain.
• Experience with one or more enterprise-level manufacturing systems (e.g., ERP - SAP, Workwise, Microsoft Dynamics; MES; PLM).
• Proven ability to plan and execute transition between old and new business systems and processes as needed.
• Proficiency in data analysis and reporting tools (e.g., SQL, Excel, Power BI).
• Excellent analytical, problem-solving, and troubleshooting skills.
• Strong communication, interpersonal, and collaboration skills, with the ability to effectively interact with both technical and non-technical stakeholders.
• Ability to manage multiple tasks and priorities in a fast-paced environment.
• Strong understanding of integrations between manufacturing systems and other business systems (e.g. ERP).

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions

• Thorough understanding of system development life cycle models and methodologies
• Thorough understanding of IT systems and processes
• Demonstrated effective interpersonal, verbal and written communication skills
• Ability to thrive in a diverse, collaborative, team-oriented environment where change occurs often
• Strong sense of initiative and a sense of urgency, demonstrated by accomplishing tasks; improving current work processes; and assisting others when necessary
• Unwavering attention to detail and commitment to world-class quality
• Ability to embrace deadlines
• Able to project a positive and professional demeanor to all internal and external contacts

Sr. Financial Systems Analyst

Chicago, IL (Hybrid)

The American Medical Association (AMA) is the nation's largest professional Association of physicians and a non-profit organization. We are a unifying voice and powerful ally for America's physicians, the patients they care for, and the promise of a healthier nation. To be part of the AMA is to be part of our Mission to promote the art and science of medicine and the betterment of public health.

At AMA, our mission to improve the health of the nation starts with our people. We foster an inclusive, people-first culture where every employee is empowered to perform at their best. Together, we advance meaningful change in health care and the communities we serve.

We encourage and support professional development for our employees, and we are dedicated to social responsibility. We invite you to learn more about us and we look forward to getting to know you.

We have an opportunity at our corporate offices in Chicago for a Sr. Financial Systems Analyst on our Finance team. This is a hybrid position reporting into our Chicago, IL office, requiring 3 days a week in the office.

As a Sr. Financial Systems Analyst, you will provide administrative
and functional maintenance and support for AMA's financial applications,
including Infor/Lawson, Oracle EPM (Hyperion), Blackline, Ironclad, Concur, and
other Finance-led systems. Focus on business process management, system
utilization, and ensuring data integrity across Finance. Liaise
with internal customers, functional areas and IT resources as well as external
vendors including hosting and SaaS providers.

RESPONSIBILITIES:

Financial Systems Management

• Provide functional support for month-end closing activities, monitor interfaces, troubleshoot user issues, meta-data maintenance, and financial systems operation.
• Perform requirement gathering, analysis, documentation, and coordination of system enhancements or configuration changes based on Finance business needs.
• Conduct testing and user acceptance for system changes.
• Identify system issues by understanding Finance business processes and develop solutions to resolve the issues.
• Collaborate with internal customers, functional areas, and IT resources to evaluate opportunities for system optimization.
• Participate in troubleshooting sessions for system issues, proposing business-side solutions and providing subject matter expertise.
• Maintain the security, confidentiality, and integrity of data on all AMA financial systems.

Documentation, Process, and Project Management

• Document and analyze business processes, system configuration, and user procedures.
• Support transition planning, system upgrades, and releases in conjunction with IT and vendors, providing business-side expertise and functional testing.
• Provide input on changes requests and assist in evaluating system impacts.
• Prepare training materials and support end users.
• Work on cross-departmental initiatives to streamline processes/workflows to improve efficiency of monthly financial closes.

Technical Collaboration

• Perform limited hands-on scripting, including simple SQL queries,
• Collaborate with IT teams for complex technical tasks, integrations, and technical troubleshooting.
• Work with system vendors and IT to support system upgrades, enhancements, and drive issue resolution.
• Document data flows between Finance systems and assist in defining requirements for integrations.

May include other responsibilities as assigned

REQUIREMENTS:

1. Bachelor's Degree in Finance, Accounting, Information Systems,
   or a related field required.
2. 5+ years of experience working on finance business processes and
   a suite of financial applications including Infor/Lawson or similar ERP systems
   required.
3. In depth expertise with multiple financial system cycles including
   accounts receivable, accounts payable, general ledger and bank settlement
   processes.
4. Demonstrated ability to gather and document business
   requirements, assist with solution configuration / design, and coordinate user
   acceptance testing.
5. Strong collaboration skills with IT and vendors.
6. Working knowledge of both relational and multi-dimensional data
   modeling concepts and processes using Microsoft SQL.
7. Strong analytical and problem-solving skills, with the ability
   to understand complex financial definitions and information and grasp
   technology concepts.
8. Demonstrated experience supporting, configuring, and
   administering financial systems, ideally Oracle Lawson, Hyperion, Concur, or
   similar ERP platforms, including coordinating enhancements with IT and vendors.
9. Excellent written and oral communication skills to translate
   business needs into clear requirements for IT partners.

The American Medical Association is located at 330 N. Wabash Avenue, Chicago, IL 60611 and is convenient to all public transportation in Chicago.

This role is an exempt position, and the salary range for this position is $87,394-$115,797. This is the lowest to highest salary we believe we would pay for this role at the time of this posting. An employee's pay within the salary range will be determined by a variety of factors including but not limited to business consideration and geographical location, as well as candidate qualifications, such as skills, education, and experience. Employees are also eligible to participate in an incentive plan. To learn more about the American Medical Association's benefits offerings, please click here.

We are an equal opportunity employer, committed to diversity in our workforce. All qualified applicants will receive consideration for employment. As an EOE/AA employer, the American Medical Association will not discriminate in its employment practices due to an applicant's race, color, religion, sex, age, national origin, sexual orientation, gender identity and veteran or disability status.

THE AMA IS COMMITTED TO IMPROVING THE HEALTH OF THE NATION

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Millennium Space Systems, a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space.

Our missions have direct impact to global security, like missile warning and Earth observation.

Our team is curious, bold and innovative.

We take risks, innovate and explore new techniques and technologies.

We influence change because we challenge the status quo.

And when we watch our satellites launch, we know each one of us made it happen.

As an Experienced Spacecraft Systems Engineer, you will be responsible for supporting the technical execution for programs and leading teams developing spacecraft systems serving a range of missions and customers.

This includes creating, monitoring, and guiding requirements definition, spacecraft design, procurement and fabrication, integration and test, and verification and validation of the overall space vehicle system.

You will interact with subsystem and unit engineers, manufacturing and test personnel, and program management.

You will manage the technical elements of the space vehicle system.

Our spacecraft systems engineers create spacecraft not just paperwork! Position Responsibilities: Responsible for all aspects of spacecraft systems engineering including performing preliminary concept development, trade studies, CONOPS definition, requirements decomposition and allocation, interface requirements definition, requirements verification and validation, support to integration and test operations, anomaly resolution, risk management, and schedule execution Collaborates with program and financial leadership to ensure successful programmatic execution Applies an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced solution for space systems Understands spacecraft subsystems functions and interfaces.

Develop integrated spacecraft system designs and solutions Coordinates and communicates with subsystem engineering teams to ensure system execution Applies model-based systems engineering techniques for the definition of the spacecraft system Participate in software integration and test activities to ensure mission functionality prior to deployment into operations Performs tasks to analyze technical data, verify and sustain specific systems configurations in accordance with defined constraints and operational requirements Performs various analyses to optimize the spacecraft system and/or system architecture Resolves cross-functional technical issues Develops and improve systems engineering processes Provides mentorship to junior systems engineering and subsystem staff Basic Qualifications (Required Skills / Experience): This position requires the ability to obtain a U.S.

Security Clearance.

for which the US Government requires U.S.

Citizenship.

A final U.S.

Top Secret security clearance is required post start.

Bachelor's degree in engineering or science discipline and 5 or more years of directly relevant industry experience with spacecraft systems; Master's degree and 3 years of related experience; or an equivalent combination of technical education and experience; Level 4: Bachelor's degree in engineering or science discipline and 9 or more years of directly relevant industry experience with spacecraft systems; Master's degree and 7 years of related experience; or an equivalent combination of technical education and experience.

1 years of experience in some or all of the following: Space systems engineering principles and techniques; Power, mass, and other system budgets; Requirements analysis and flow-down; Design verification and validation processes; Configuration management; Satellite level integration and test processes Preferred Qualifications (Desired Skills/Experience): Master's degree in aerospace or other relevant engineering or science discipline 9 years' professional experience in space systems engineering Direct experience with one or more rapid spacecraft development programs and missions.

Experience with a full life cycle from concept to in-orbit operations Demonstrated familiarity with program management principles and tools An Active TS/SCI U.S.

Security Clearance.

Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process Drug Free Workplace: Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Total Rewards: At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range: Level 3: $99,000
- $177,000 Level 4: $121,000
- $215,000 Millennium is DDTC-registered, ITAR-compliant Company.

This position is located at a facility that requires special access.

Applicants MUST be U.S.

citizens and eligible for a security clearance.

Additionally, applicants must be willing to apply for and maintain a security clearance.

We encourage all interested candidates to apply for any open position for which they feel they are qualified.

Applications for this position will be accepted until May.

31, 2026 Export Control Requirements: This position must meet U.S.

export control compliance requirements.

To meet U.S.

export control compliance requirements, a "U.S.

Person" as defined by 22 C.F.R.

§120.62 is required.

"U.S.

Person" includes U.S.

Citizen, U.S.

National, lawful permanent resident, refugee, or asylee.

Export Control Details: US based job, US Person required Relocation Relocation assistance is not a negotiable benefit for this position.

Security Clearance This position requires the ability to obtain a U.S.

Security Clearance for which the U.S.

Government requires U.S.

Citizenship.

An interim and/or final U.S.

Top Secret/SCI Clearance Post-Start is required.

Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.aa415a4b-8b21-40fc-a65c-70d2b25ca29a

About the Company

Chemline is dedicated to providing top-notch chemical processing solutions while fostering a culture of safety, innovation, and teamwork.

About the Role

The Manufacturing Systems Engineer designs, implements, and supports software systems that manage and monitor production processes within Chemline’s manufacturing facility. This role focuses on Manufacturing Execution Systems (MES), automation integration, and production data systems to improve real-time visibility, efficiency, and quality control.

Working at an intermediate professional level, the Manufacturing Systems Engineer collaborates with operations, quality, maintenance, and IT teams to align software configuration with manufacturing workflows. The role ensures that production automation and control systems meet established safety, quality, and reliability standards while supporting continuous improvement initiatives.

Responsibilities

MES Development & System Management

• Design, develop, configure, and maintain Manufacturing Execution Systems (MES) to track production output, quality metrics, and operational performance.
• Align system functionality with plant operations to ensure accurate data capture and reporting.
• Support enhancements and upgrades to manufacturing software platforms.

Data Collection & Reporting

• Gather data from machines, automation systems, and operators to build dashboards, databases, and reports.
• Develop and maintain performance monitoring tools to provide real-time production visibility.
• Analyze production data to identify trends, bottlenecks, and improvement opportunities.

Automation & Systems Integration

• Integrate automation and control systems with manufacturing processes to improve efficiency and accuracy.
• Support implementation of new production technologies and digital initiatives.
• Ensure system compatibility between production equipment and IT infrastructure.

Safety, Quality & Reliability

• Ensure production automation systems meet company safety standards and applicable regulatory requirements.
• Support validation and documentation of system changes affecting quality or compliance.
• Participate in troubleshooting system issues impacting production performance.

Collaboration & Continuous Improvement

• Work cross-functionally with operations, maintenance, quality, and IT teams.
• Assist in resolving technical issues that affect plant operations.
• Contribute to continuous improvement initiatives focused on process optimization and digital transformation.

Qualifications

Required:

• Bachelor’s degree in Engineering, Computer Science, Information Systems, or related field.
• 2–4 years of related experience in manufacturing systems, automation, or industrial software environments.
• Experience working with MES platforms, industrial databases, or production monitoring systems.
• Knowledge of automation integration and production control systems.
• Strong analytical and problem-solving skills.

Preferred:

• Experience in chemical or process manufacturing environments.
• Familiarity with PLCs, SCADA systems, and industrial networking.
• Experience building dashboards or reporting tools (e.g., SQL, Power BI, Ignition, similar platforms).

Work performed in both office and manufacturing plant environments. May require time on the production floor interacting with equipment and operators. Must comply with plant safety policies and PPE requirements when in operational areas.

This is an intermediate-level professional role (P02). The incumbent works independently on assigned projects but may be occasionally directed on more complex tasks. The role is gaining exposure to advanced system integration and manufacturing technology initiatives.

ANF is seeking a Business Systems Support & Training Specialist. This role is responsible for supporting, troubleshooting, and maintaining business applications, with a strong focus on CMiC (ANF's ERP), ensuring seamless operation for both enterprise users and field teams. In addition to day-to-day support, this role plays a critical role in training, onboarding, and capability development across the organization.

Why Join Us?

We are a growing Company serving the South Florida Market for over 40 years. We are dynamic, innovative and focused on delivering our clients successful and on-time projects looking for dedicated individuals seeking opportunities to become a vital part of a team that truly values all construction project management has to offer. At ANF Group, we are committed to building exceptional projects and fostering a work environment where innovation, collaboration, and professionalism thrive.

Company Benefits:

• Comprehensive health, dental, and vision insurance
• 401(k) retirement plan with company match
• Paid time off and holidays
• Opportunities for professional development and growth

Responsibilities include:

Business Systems & CMiC Support

• Provide hands-on support for CMiC users across enterprise and field teams.
• Incident management to include ticket creation, triage and diagnosis, escalation and communication if needed, and testing and user-acceptance.
• Manage user accounts, security settings, and system access for CMiC and other business systems.
• Assist with CMiC configurations, module updates, and troubleshooting.
• Ensure data integrity and accuracy within CMiC for reporting and operations.
• Serve as the primary point of contact for CMiC-related issues and escalate when needed.
• Help field teams troubleshoot CMiC mobile and on-site system access issues.
• Support business units in leveraging CMiC for project tracking, cost management, and reporting.
• Assist in testing, updating, and rolling out new CMiC features or system upgrades.
• Work closely with IT, finance, and operations teams to support business system needs.
• Coordinate with CMiC support and vendors to troubleshoot and resolve system issues.
• Major incident management and companywide communication.

Training, Onboarding, and Learning Enablement

• Own and support training and onboarding for both new and existing employees related to CMiC and other core business systems.
• Design, build, and maintain a clear, structured training curriculum, including role-based learning paths.
• Deliver live training sessions, workshops, and onboarding sessions for new hires and existing employees.
• Partner with business leaders, IT, and Build U stakeholders to align training content with operational needs and organizational priorities.
• Create and maintain user guides, training materials, knowledge bases, standard operating procedures, and troubleshooting FAQs to support self-service learning.
• Identify skill gaps and recommend training improvements to continuously raise system proficiency and effectiveness.
• Support change management efforts by preparing users for system updates, new functionality, and process improvements.
• Measure training effectiveness and continuously refine content to improve outcomes and adoption.

Qualifications

Education:

• Bachelor’s degree in Information Systems, Business, or a related field.

Experience:

• 2-4 years of experience in business systems support, IT support, or technical training.
• Demonstrated experience delivering end-user training, facilitating workshops, and supporting onboarding for new and existing employees.
• Experience designing, developing, and maintaining structured training curricula, learning paths, and documented learning modules.
• Experience creating and managing content within a Learning Management System (LMS) or similar training platforms (e.g., course creation, updates, tracking completion).
• Ability to translate complex technical concepts into clear, user-friendly training materials for diverse audiences.
• Experience developing user guides, job aids, knowledge bases, and self-service learning resources.
• Hands-on experience with CMiC highly preferred.
• Experience troubleshooting ERP systems, business applications, and integrations.
• Strong problem-solving skills, attention to detail, and a continuous improvement mindset.
• Excellent written and verbal communication skills, with confidence presenting and training cross-functional groups.
• Proficiency in Microsoft applications (Excel, Word, Outlook; Power BI is a plus).

The Business Systems Support & Training Specialist plays a critical role in both system reliability and organizational capability building. This role goes beyond technical support by helping standardize training, elevate system usage, and reinforce ANF’s commitment to continuous learning through the Build U initiative. The position provides an opportunity to develop deep expertise in CMiC system administration, training design, and business process improvement while directly impacting adoption, efficiency, and employee development across the organization.

Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to Race, Religious Creed, Color, National Origin, Ancestry, Physical or Mental Disability, Medical Condition, Genetic Information, Marital Status, Sex, Gender, Gender Identity, Gender Expression, Sexual Orientation, Military or Veteran status.

**Company conducts post-offer, pre-employment drug screening, background check, and Motor Vehicle Report.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

As a Flexible Machining System (FMS) Operator you will have the opportunity to work with advanced CNC technology, ensuring precision and efficiency in the machining process. Your expertise will be essential in optimizing machine setups and operations, contributing to the production of high-quality components that meet stringent industry standards

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities

• Prepare for job setup by reviewing work orders, tie-in sheets, operator documents, blueprints, or CATIA plots for production orders, first lots, or tool tryouts.

• Review Work Orders (W/O) to confirm the correct type and quantity of materials and tools or fixtures are issued and free from visible defects, updating CMES as necessary.

• Identify the type of setup required based on documentation and check machine setups or parts completed by previous operators to assess job progress and ensure safe working conditions.

• Select and verify the condition of machine accessories and holding devices (e.g., chucks, vises, templates) and identify any required fixtures or shop aids.

• Attach air nozzles or suction devices for vacuum fixtures, securing them with bolts or clamps as specified in the operator setup documents.

• Use overhead cranes to load and unload parts and fixtures as required for the machining process.

• Upload and download CNC (Computer Numerical Controlled) programs to machine controllers using computing equipment from various servers or databases.

• Select and check cutting tools according to program specifications, ensuring they are the correct type, length, diameter, and in good condition before installation.

• Set machine coordinates or index points per CNC documents, including cutter offsets, tool heights, and probes, using appropriate measuring tools.

• Run CNC programs to machine rough and precision cut parts, monitoring machine operations for unusual vibrations, sounds, or warning indicators.

• Adjust machine settings (e.g., speeds and feeds) to correct machining issues or prepare the machine for subsequent operations, including head and spindle angles.

• Troubleshoot and repair minor controller problems as required, and initiate requests for corrective action when machine malfunctions occur.

• Perform Statistical Process Control (SPC) functions as required to ensure quality standards are met.

• Check completed work for defects and ensure parts meet drawing specifications, removing sharp edges with deburring tools as required.

• Maintain personal and tool certifications and assist planners or programmers in determining final numerical control programs to optimize machine utilization and minimize setups.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 2+ years of experience setting up and operating Manual and CNC machines

• 2+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators

• 2+ years of experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications

•  2+ years of experience working with powered hand tools

• Experience with reading and interpreting drawings, specifications, material processes, schematic and diagrams

• Must be able to lift, push and pull up to 35 pounds frequently within an 8-hour shift

Preferred Qualifications:

• Experience in Fabrication of airplane parts

• Experience in Fabrication of temporary tooling

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $33.32/hour, with the potential to earn up to $61.01 /hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Mar. 20, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Contingent Upon Program Reward

The position is contingent upon program award

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing's Safety, Security, & Airworthiness (SSA) organization is seeking a Senior Systems Engineer – Compliance/Certification to join their Regulatory Administration System Oversight Team in Everett, WA.

The individual will have the opportunity to contribute to critical monitoring initiative and collaborate with industry – leading professional and regulatory agencies

Primary responsibilities:

• Leads the identification, analysis, and assessment of regulatory and contractual compliance of aerospace systems, products and services.
• Collaborate with internal and external stakeholders to define airworthiness and regulatory compliance requirements
• Reviews complex regulatory and customer requirements and develop monitoring strategies. (i.e. Certification)
• Leads analysis of regulatory and certification technical data for completeness and alignment to applicable regulatory and contractual requirements.
• Develop the planning and implementation of monitoring strategies.
• Research, investigates and monitors compliance processes for achieving regulatory compliance and recommends and leads process improvements, risk and opportunities
• Engages with regulators on complex programs or initiatives to shape certification strategies, approaches, activities, and artifacts.
• Develops and reviews, complex compliance reports and documents in accordance with applicable requirements and regulations.
• Leads establishing and promoting global regulatory advocacy strategies, trainings, tools, and methods.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite in Everett, WA.

Basic Qualifications (Required Skills and Experience):

• 9+ years of related work experience or an equivalent combination of education and experience
• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (including manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
• 8+ years of experience working across the certification value stream.
• Experience working in International Type Validation and/or Operational Certification
• 4+ years of experience with certification processes to comply with 14 CFR 21.93, 21.95 and 21.97
• Systems thinker capable of making engineering proposals based on data analysis and forecasting wide reaching and longer-term impacts
• Experience developing presentations and presenting to multiple levels of an organization
• Experience investigating and finding solutions to complex technical or regulatory issues
• Strong technical writing abilities
• Experience extracting and compiling data from multiple sources
• Experience with analytics tools including Tableau, SQL, R, and Python

Preferred Qualifications (Desired Skills and Experience):

• 8+ years of experience identifying key stakeholder project specific requirements and scope, then building and managing project plans
• 8+ years of experience in business intelligence/data analytics tools (Microsoft Power BI, Dashboards, SQL, Tableau, etc.)
• Experience with systems engineering and integration of complex systems
• Experience with Risk Management
• Experience with audit activities
• Experience with Functional Decomposition
• Firsthand experience with airplane requirements

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range: $129,700 - $174,80

Applications for this position will be accepted until Mar. 25, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

We are looking for a Senior Business Analyst (Oracle Fusion & Financial Systems) for a contract-to-hire. This is a 100% onsite role that can sit in: Portland, OR; Bellevue, WA; or Carson CA

Top Skills' Details

• 5+ years of experience supporting ERP or financial systems in a complex, multi-entity environment
• Experience administering or supporting Oracle Fusion Financials
• Strong SQL skills for data validation, reconciliation and integration troubleshooting
• JIRA or Azure DevOps
• Nice to have: working knowledge of General Ledger structures, grocery or retail industry experience

Contract-to-Hire with $104-110k conversion + benefits

Summary: The IT Senior Business Analyst – Oracle Fusion & Financial Systems serves as a strategic partner at the intersection of Finance and Technology. This role is responsible for supporting and administering Oracle Fusion Financial modules and associated enterprise integrations and reporting systems.

The position blends hands-on ERP systems administration with business analysis and cross-functional coordination. The successful candidate will collaborate closely with Finance, Accounting, Data Engineering, and IT Product Management to ensure system configuration, integrations, reporting structures, and governance processes align with enterprise financial objectives.

This role requires both technical fluency and business acumen, with the ability to translate accounting processes into scalable, well-governed system solutions.

Essential Duties and Responsibilities

• Oracle Fusion Administration
  • Support and administer Oracle Fusion Financial modules, including General Ledger structures, reporting hierarchies, security roles, and configuration management.
  • Maintain and enhance financial reporting structures and configurations in alignment with accounting governance.
  • Coordinate system updates, patches, and configuration changes across technical and finance stakeholders.
  • Ensure appropriate documentation and audit traceability of system changes.
• Financial Systems & Integration Oversight
  • Partners with Data Engineering to define and validate integrations between Oracle Fusion and enterprise data platforms.
  • Perform data validation, reconciliation analysis, and root cause investigation across systems.
  • Maintain system flow diagrams, data lineage documentation, and source-to-target mappings.
• Business Analysis & Stakeholder Partnership
  • Works directly with Finance and Accounting teams to gather and refine requirements.
  • Supports period close changes, reporting adjustments, and structural updates.
  • Translates accounting processes into technical system configuration requirements.
  • Support backlog prioritization in partnership with IT Product Management.
  • Identify opportunities to improve financial processes through system optimization.
• Application Support & Vendor Coordination
  • Serve as primary point of intake for Oracle Fusion-related support requests from Accounting, Finance, and business stakeholders.
  • Triage, prioritize, and manage support tickets, ensuring appropriate classification, resolution tracking, and stakeholder communication.
  • Coordinate activities across onshore and offshore support teams, ensuring timely resolution in accordance with defined SLAs.
  • Monitor recurring issues and partner with Product Management and Engineering to drive root cause analysis and long-term remediation.
  • Facilitate communication between business stakeholders and technical support resources to ensure clarity of requirements and resolution outcomes.
  • Track support trends and provide reporting on system health, backlog, and performance metrics.
  • Escalate high-impact or cross-functional issues appropriately and proactively manage stakeholder expectations.
  • Tools and Equipment Used (not all inclusive): This position works with standard office equipment.
  • Frequently required to sit, walk, reach and grasp. Occasionally required to be on feet with a mix of standing and walking throughout shift. Up to occasionally, dependent on location, required to climb stairs, step stool and /or ladders.

Qualifications:

To successfully perform the requirements of this position, an individual must consistently execute each essential function at a satisfactory level. The requirements listed in the following text are representative of the knowledge, experience, and skill levels required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

• 5+ years supporting ERP or financial systems in a multi-entity environment.
• Experience administering or supporting Oracle Fusion Financials strongly preferred.
• Working knowledge of General Ledger structures, chart of accounts design, financial reporting configurations, and security models.
• Strong SQL skills for data validation, reconciliation, and integration troubleshooting.
• Experience partnering directly with Finance and Accounting stakeholders.
• Familiarity with ERP-to-Data Warehouse integration patterns.
• Experience in grocery or retail industry is preferred but not required.
• Proficiency in using Agile tools, such as Jira or Azure DevOps, for backlog management and sprint execution in the context of retail technology projects.
• Ability to work collaboratively in a fast-paced, dynamic environment, with a customer-centric mindset.
• Detail-oriented and able to manage multiple priorities and deadlines within a retail technology project context.
• Strong facilitation and negotiation skills to drive consensus, resolve conflicts, and ensure alignment between retail business stakeholders and technical teams.

Job Type & Location

This is a Contract to Hire position based out of Portland, OR.

The pay range for this position is $50.00 - $65.00/hr.

Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:

• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)

This is a fully onsite position in Portland,OR.

This position is anticipated to close on Mar 20, 2026.

We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at .

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.