Lateral Link Vs Control Arm Jobs in Usa

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field TestingMaintenance
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing
  
• Experience in reading mechanical and control schematics
  
• Experience in building automation systems (BAS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with test equipment and test equipment software
  
• Experience with networking design, configuration, and troubleshooting
  
• Experience with air handlers, chiller plant systems and data center CRAC units
  
• Ability to travel up to 80%
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

Security Guard is able to perform a variety of fixed-post, mobile, or foot patrols while maintaining situational awareness and making decisions and/or taking actions consistent with established post orders, facility rules, guidelines and protocols. Duties may include work in austere and uncomfortable conditions for prolonged periods of time, including periods of inclement weather, while performing walking, standing, searching, and surveillance or sitting duties essential to the performance of the security functions.

Keep supervisors and managers informed of unusual occurrences and important events as detailed in post orders, rules, regulations, guidelines, and protocols.

Monitor alarms, radio traffic and other information sources. Dispatch or inform others as needed and authorized.

Report and appropriately address fire alarms, burglary alarms, requests for assistance and criminal acts; including but not limited to: vandalism, theft, illegal entry or attempted entry, suspicious behavior, domestic or workplace violence, threats, speed or other vehicle violations, illegal drug use, inappropriate use of facility or client equipment or property.

Stop, screen, inquire, and inspect vehicles and pedestrians entering and / or exiting the facility as directed by post orders, rules, regulations, guidelines, and protocols.

Prevent passage of prohibited articles onto or from client facility.

Escort individuals or vehicles in accordance with post orders, rules, regulations, guidelines and protocols.

Use portable radios, phones, or other communication devises appropriately and according to established rules.

Monitor all APSI and client equipment; guard against loss or damage; report any such loss or damage immediately to a supervisor or manager.

Log in Property Pass numbers for authorized property/equipment movements.

Ensure the security of government property, detaining personnel, and reporting anyone involved with unauthorized property/equipment removal.

Conduct regular patrols and inspections of buildings and facilities

Issue required vehicle passes to authorize personnel.

Monitor electronic access control and report violations

Monitor radio-frequency identification (RFID) systems and respond to alarms indicating unauthorized removal of government property.

Grant access to areas during non-working hours to authorized personnel in accordance with the established procedure and access lists.

Monitor facility equipment and utility systems and report deficiencies to personnel responsible for repairs.

Perform random surveillance of buildings for the detection of unauthorized or inappropriate activity.

Perform random surveillance of fence line for breaches and the detection of unauthorized removal of government property, illegal or inappropriate activity.

Provide additional security support for scheduled events that may occur during or after duty hours or for unscheduled emergencies as requested by supervisor

Maintain activity logs and administrative documents as required by contract.

Contact, assist, and cooperate with local, state, or federal law enforcement; locate, retain, and protect necessary evidence; testify as necessary in judicial and administrative proceedings.

Other duties as assigned.

Access to government facilities/installations specific to this position is a mandatory requirement to fulfill the minimum qualifications for this position. The Government reserves the right, at its sole discretion, to deny or revoke access to the facilities/installations for reasons related to misconduct or security, with or without prior notice. If such access is denied or revoked by the Government, it will result in the termination of the employment relationship as the minimum job requirements can no longer be met.

Supervision: None

Minimum Qualifications:

1. Education: High school diploma or equivalent

2. Experience: a. Minimum of 2 years of security/civilian law enforcement experience OR an equivalent position with the United States Armed Forces (military). b. One year of work experience demonstrating the ability to follow directions, meet attendance requirements and the ability to complete the training necessary to certify with the State.

3. Must have a State of Massachusetts weapons carry permit.

4. Language: Must be fluent in speaking and writing in English.

5. Pre-Hire Screening: Must be able to pass criminal background screen, drug test and physical exam.

Preferred Qualifications:

1. First Aid/CPR certification.

2. Prior experience with the Glock platform.

3. Proficiency in basic computer skills.

4. Use of Force training.

5. Weapons proficiency.

Core Competencies:

Communication, Oral - Ability to communicate effectively with others using the spoken word.

Communication, Written - Ability to communicate in writing clearly and concisely according to strict deadlines.

Self-Motivated - Ability to be internally inspired to perform a task to the best of one's ability using his or her own drive or initiative.

Team Builder/Worker - Ability to inspire and work within a group of people to work toward a goal.

Organized - Possessing the trait of being organized or following a systematic method of performing a task.

Time Management - Ability to utilize the available time to organize and complete work within given deadlines.

Flexible - Ability to adjust to a dynamic workflow and reprioritize as project demands change.

Work Environment:

The position may require extensive sitting, watching monitors, walking around the facility outside in rain, wind or other poor weather conditions and kneeling and stooping to look under or inside vehicles or containers.

Physical Demands:

1. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

2. While performing the duties of this job the employee is frequently required to sit, talk or hear, stand, walk, use hands to handle, or operate objects, tools or controls; and reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, and taste or smell.

3. The employee occasionally lifts and/or moves anything from 10 to 100 pounds. Specific vision abilities required by this job includes close vision, distance vision, color vision and peripheral vision, depth perception and the ability to focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Work Schedule:

Rotating shifts, times, days as scheduled to meet the requirements of the contract (Night and weekend work required.)

Education:

Required: High School Diploma/GED or better.

Experience:

Required: 2 years: Experience: a. Minimum of 2 years of security/civilian law enforcement experience OR an equivalent position with the United States Armed Forces (military). b. One year of work experience demonstrating the ability to follow directions, meet attendance requirements and the ability to complete the training necessary to certify with the State. Must be fluent in speaking and writing in English. Must be able to pass criminal background screen, drug test and physical exam.

Licenses & Certifications:

Required: State Guard Card

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

POSITION SUMMARY

We are seeking a highly qualified Residential Security Agent to join our team of dedicated professionals. The ideal candidate will demonstrate exceptional judgment, integrity, and situational awareness while ensuring the safety and security of personnel, property, and visitors. This position requires extensive experience in armed security operations, superior communication skills, and the ability to respond effectively to high-pressure situations.

PAY TRANSPARENCY:

$44.50 per hour + $5.05 health and welfare

RESPONSIBILITIES

• Provide armed protection for personnel, facilities, and assets in accordance with company policies and client requirements.
• Conduct roving patrols, access control, and perimeter security to prevent unauthorized entry, theft, vandalism, or safety hazards.
• Monitor and respond to security systems, alarms, and surveillance equipment.
• Screen and process all visitors, ensuring compliance with security procedures.
• Identify, investigate, and report suspicious activity or safety concerns.
• Maintain detailed and accurate incident and daily activity reports.
• Coordinate and communicate effectively with law enforcement, emergency responders, and site leadership during incidents.
• Apply de-escalation techniques and exercise sound judgment when responding to disturbances or threats.
• Adhere to all use-of-force policies and maintain weapons in a safe and responsible manner.
• Support a culture of safety, professionalism, and customer service at all times.

QUALIFICATIONS

• Be a citizen of the United States of America.
• Be at least 21 years of age. While there is no maximum age limit for RSA positions, all applicants shall be able to withstand the physical demands of the job and be capable of responding to emergency situations.
• Be a high school graduate or have a General Educational Development (GED), or equivalency.
• Be able to read, write, and speak the English language fluently.
• Possess a valid, unrestricted (except eyeglass wear) state driver's license.
• Possess one of the following qualifications:
• a minimum of three years of military experience, or;
• a minimum of one year of sworn law enforcement or armed contract security guard experience providing services similar to this contract requirement
• Undergo a criminal background check processed by the Government.
• Be free from conviction of any felony.
• Be free from conviction of any misdemeanor crime of domestic violence in accordance with United States Code, Title 18 S.C. § 922(g)(9) (Lautenberg).
• Be free from any convictions for Driving under the Influence in the past three years prior to application.
• In the case of military service, any separation must have been under honorable conditions.
• Successfully pass all physical fitness requirements.
• Possess a solid work history without any significant infractions or discipline.
• Meet or exceed all position requirements listed in the Statement of Work

BENEFITS

Constellis offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects its commitment to creating a diverse and supportive workplace.

• Medical, Vision & Dental Insurance
• Paid Time-Off Program & Company Paid Holidays
• 401(k) Retirement Plan
• Insurance: Basic Life & Supplemental Life
• Health & Dependent Care Flexible Spending Accounts
• Short-Term & Long-Term Disability
• Personal Development & Learning Opportunities
• On-the-job Training, Skills Development & Certifications
• Corporate Sponsored Events & Community Outreach

WORKING CONDITIONS

• Business work hours are 24/7 and weekend availability is required.
• Work is typically based in a busy environment and subject to frequent interruptions.
• May be subject to outdoor conditions including extreme temperatures and weather.
• Subject to high noise levels

PHYSICAL REQUIREMENTS

The position may require extensive sitting, watching monitors, walking around the facility outside in rain, wind or other poor weather conditions and kneeling and stooping to look under or inside vehicles or containers.

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job the employee is frequently required to sit, talk or hear, stand, walk, use hands to handle, or operate objects, tools or controls; and reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, and taste or smell. The employee occasionally lifts and/or moves anything from 10 to 165 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and peripheral vision, depth perception and the ability to focus. Work in austere and uncomfortable conditions for prolonged periods, including periods of inclement weather, while performing walking, standing, searching, and surveillance or sitting duties essential to the performance of the security functions.

Security Guards are responsible for conducting a variety of security-related duties and must be familiar with current federal and state laws, and USCG policies, practices, and standard operating procedures. Security Guards are responsible for controlling entry/exit posts; roving patrols; control, issuance, and storage of keys; alarm and fire system monitoring; enforcing building rules and regulations; prohibiting unauthorized access; responding to incidents, accidents, injuries, and/or illnesses; and other additional duties as required by supervision/management.

Applicants selected will be subject to a background/security investigation and must be drug-free and remain drug-free during the period of employment. This position reports directly to their assigned shift supervisor.

Essential duties and responsibilities include:

• Controlling entrance/exit posts.
• Conducting roving patrols.
• Controlling, issuing, and storing keys.
• Monitoring alarm and fire systems.
• Enforcing building rules and regulations.
• Prohibiting unauthorized access.
• Responding to incidents, accidents, injuries, and/or illnesses.
• Daily clerical/administrative support (i.e. logs, journals, and pass-downs).
• Other additional duties as required by supervision/management.

Non-essential duties and responsibilities include:

• Other duties as assigned.
• May require occasional travel.

Requirements/qualifications:

• Possess a high school diploma or equivalent.
• Possess the knowledge and ability to perform all required guard services duties.
• Possess experience in security or law enforcement.
• Must be able to read, write, and speak English fluently.
• Have no felony convictions and no convictions that reflect on the individual's reliability including those crimes classified under the Lautenberg Act.
• Must be 21 years of age to be armed.
• Be a citizen of the United States.
• Possess a valid state driver's license (all positions herein may require the use of a motor vehicle).
• Possess any/all required state security guard licenses/permits.
• Obtain/maintain government approval.
• Must have no record or history of illegal drug use, sale, possession, or manufacture during the previous five years. Drug testing and screening may be conducted prior to hiring an employee. Annual drug testing may be conducted.

Skills, knowledge, and abilities:

• Ability to work independently and in a team environment.
• Ability to accept and respond to new emergent and unique project task requirements.
• Ability to present ideas clearly and succinctly both in writing and verbally to co-workers, team members, internal department groups and personnel as well as outside entities to include other departments.

Physical requirements:

• Employees must be able to stand for prolonged periods in performance of their gate guard duty.
• Shall be free from any communicable disease.
• Shall possess binocular vision, correctable to 20/20 (Snellen) and shall not be colorblind.
• Shall be capable of hearing ordinary conversation at 20 feet without benefit of artificial hearing devices.

Work environment:

• Work is typically performed in both an uncontrolled and controlled environment; as such, while performing the duties of this job, the employee may be exposed to weather conditions prevalent at the time.
• The noise level in the work environment is usually moderate.

Additional qualifying factors:

• As a condition of employment, must pass a pre-employment drug screening, as well as have acceptable reference and background check results.

• 
  
• Conduct inspections to ensure compliance and conformance with project or contract specifications
  
• Conduct inspections in accordance with Quality Control Plan
  
• Conduct inspections to ensure adherence to applicable legal requirements
  
• Confer with Quality Assurance, Manager as appropriate
  
• Read blueprints and specifications
  
• Monitor operations to ensure that they meet specifications
  
• Recommend adjustments to the assembly or installation process
  
• Inspect, identify, and submit material, components, or products for testing and measurement
  
• Operate electronic inspection equipment and software
  
• Document approval or rejection of inspected material, components, or products
  
• Identify for removal all components, products and materials that fail to meet specifications
  
• Report inspection and test data and quantities inspected
  
• Participate in the Preparatory Meeting for each definable feature of work to review pertinent sections of the plans and specs requirements with the foreman supervising the work.
  
• Participate in Initial Inspection to assure all required/approved materials, personnel and equipment are available, verify the site conditions, inspect the initial installation of the work and identify the required level of workmanship, quality, and safety measures
  
• Participate in Follow-up Inspections continuously to insure professional workmanship, quality and safety in accordance with contract documents.
  
• Perform inspections on all work performed in detail, efficiently, and in conjunction with Owner/QC.
  
• Collect data, analyze for continuous improvement, and share with project team weekly.
  
• Participate in the daily Operational Risk Management (ORM) meetings ensuring Quality items/issues for the scope of the work are discussed and present at least 2-3 quality tips of the day relevant to the scope of work.
  
• Document daily QC reports
  
• Understand and follow all applicable quality system procedures, performing all assigned responsibilities outlined in the QMS.
  
• Perform Receiving (REC), First Article (FAI), In-Process (IP) and Final Inspections (FI) on electrical and mechanical assemblies visually and/or with inspection equipment.
  
• Immediately notify operators, or supervision of any non-conformances in products
  
• Perform all quality reporting requirements outlined in the MCD Quality Management System (including the inspection checklists, Data Collection Reports (PDCR), hold logs, discrepancy notices, waiver logs etc.) Identify for segregation nonconforming units following the MCD Nonconformance procedure for prefabricated and purchased products.
  
• Assist in the training of operators and provide guidance.
  
• Assist in the problem-solving process.
  
• Participate in the Daily ORM work briefings to represent the Quality Portion.
  
• Assist in root cause, corrective and preventive action development for systemic issues.
  
• Advise appropriate party of any corrective action to be taken.
  
• Coordinate with supervisor to ensure all shifts are covered appropriately in case of absence of an inspector.
  

• 
  
• Associates Degree in Technical Discipline (may be substituted for quality related experience)
  
• At least 4 years hands-on experience in the electrical industry
  
• To possess or have the ability to obtain a Journeyman License within 6 months of hire
  
• Experience with reading and interpreting contractual requirements, drawings, BIM models, specifications, current NEC codes, NETA and other applicable standards
  
• Experience with receiving, production, shipping and quality processes
  
• Excellent communication skills (written, and verbal)
  
• Strong attention to details, highly organized and computer literate
  
• Ability to work well in a fast-paced manufacturing environment
  

• 
  
• A competitive salary
  
• Medical, dental, vision, life, and disability insurance
  
• Paid-time off
  
• Tuition reimbursement
  
• 401k Retirement Plan
  
• Military Reserve pay offset
  
• Paid maternity leave
  

• 
  
• Exposure to computer screens for an extended period of time
  
• Sitting for extended periods of time
  
• Reach by extending hands or arms in any direction
  
• Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard
  
• Listen to and understand information and ideas presented through spoken words and sentences
  
• Communicate information and ideas in speaking so others will understand
  
• Read and understand information and ideas presented in writing
  
• Apply general rules to specific problems to produce answers that make sense
  
• Identify and understand the speech of another person
  

Allied Universal, North America's leading security and facility services company, provides rewarding careers that give you a sense of purpose. While working in a dynamic, diverse, and inclusive workplace, you will be part of a team that fuels a culture that will reflect in our communities and customers we serve. We offer medical, dental, and vision coverage, life insurance, retirement plans, employee assistance programs, company discounts, perks, and more for most full-time positions!

As a Security Professional Armed Patrol Morning Shift in Reno, NV, you will serve and safeguard clients in a range of industries such as Government and more.

As a Patrol Armed Officer with Allied Universal, you will play a key role in supporting a government location by conducting regular patrols and maintaining a visible presence to help to deter security-related incidents. Your responsibilities will include monitoring assigned areas, responding to incidents, and providing outstanding customer service and communication to all individuals on site. This position requires you to be armed and to meet all armed guard card requirements. If you meet the driving requirements, you may also be responsible for operating a vehicle as part of your patrol duties. At Allied Universal, we value agility, reliability, and innovation, and our team-oriented culture puts people first while always acting with integrity. Join us to make a meaningful impact in a dynamic environment where your experience and commitment are truly valued.

Position Type: Full Time

Pay Rate: $24.74 / Hour

Job Schedule:

Day Time Mon 12:00 PM - 08:00 PM

Tue 12:00 PM - 08:00 PM

Wed 12:00 PM - 08:00 PM

Thur 12:00 PM - 08:00 PM

Fri 12:00 PM - 08:00 PM

What You'll Do:

• Use our proprietary scheduling platform to claim open shifts at client sites
• Support operations across a range of environments including commercial real estate, healthcare, and education
• Receive site-specific training and guidance from experienced teams
• Deliver consistent, professional security presence and customer service
• Be ready to fill in at short notice when urgent needs arise

Responsibilities:

• Provide customer service to our clients by carrying out security-related procedures, site-specific policies and when appropriate, emergency response activities.
• Respond to incidents and critical situations in a calm, problem-solving manner.
• Conduct regular and random patrols around the government location and its perimeter to help to deter unauthorized activity.
• Monitor for suspicious behavior and report any security-related concerns to the appropriate authorities or management.
• Maintain a visible presence while on patrol to help to deter potential threats and provide reassurance to employees and visitors.
• Follow all protocols for handling and carrying firearms in accordance with Allied Universal and client policies.
• Complete detailed and accurate reports regarding incidents, observations, and daily activities.
• Assist with access control by verifying identification and credentials of individuals entering the location.
• Collaborate with local law enforcement and emergency responders as needed during incidents or emergencies.

What We're Looking For:

• Availability across various days and shifts
• Reliability and ability to adapt to different post assignments
• A desire to gain broad experience and grow within the company
• Interest in transitioning into full-time roles when available

Minimum Requirements:

• Have at least 3 years of combined law enforcement, military, or security-related experience or possess a college degree.
• Have at least 1 year of armed security-related, law enforcement, or military experience.
• Possess a valid armed guard card or license as required by state and/or local regulations.
• Be able to lift more than 20 pounds is preferred.
• Possess a valid driver's license and meet Allied Universal driver policy requirements.
• Be at least 21 years of age for armed roles.
• Possess a high school diploma or equivalent.
• As a condition of employment, applicants will be subject to a background investigation in accordance with all federal, state, and local laws.
• Allied Universal will consider qualified applications with criminal histories in a manner consistent with applicable laws.
• As a condition of employment, applicants will be subject to a drug screen to the extent permitted by law.
• Participate in industry-specific security-related training programs.
• Licensing requirements are subject to state and/or local laws and regulations and may be required prior to employment.
• A valid driver's license will be required for driving positions only.

Why Join Us:

• Flexible Scheduling: Choose from a variety of open shifts that align with your availability and lifestyle.
• Career Growth: Clear path to full-time roles and ongoing advancement through paid training programs.
• Smart Tools: Access exclusive technology for real-time shift visibility and claiming.
• Full-Time Benefits: Health insurance, 401(k) plans, and a comprehensive benefits package for full-time employees.
• Employee Perks: Enjoy discounts at restaurants, entertainment venues, and more through our perks program.

Allied Universal is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status, or any other basis protected by law. For more information: you have any questions regarding Equal Employment Opportunity, Affirmative Action, Diversity and Inclusion, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: ID

2

• 
  
• Plan, write, and execute manual, CMM, and Vision System inspections
  
• Support internal customer requests for support related to inspection, measurement strategy, calibration, and other related requests.
  
• Identify nonconformances and collaborate with engineering and manufacturing teams to conduct root cause analysis and implement corrective actions
  

• 
  
• Document and record inspection results and properly file hard and electronic copies
  
• Interpret drawings and schematics.
  
• Initiate nonconformance reports (NCR's) for all nonconforming material.
  
• Perform inspections using the microscope.
  
• Perform first-article reports using various inspection tools.
  
• Follow customer specifications to satisfy the inspection requirements of the drawing or work order instructions
  
• Uphold the company core values
  
• Other duties as assigned
  

• 
  
• Must have the knowledge and experience necessary for the position.
  
• Must be able to follow instructions and procedures and work with minimal supervision.
  
• Must be capable of reading drawings and inspecting the work being performed.
  
• Strong understanding of GD&T.
  
• Manual and/or CMM inspection experience.
  
• Experience using Height Gauges, Micrometers, Calipers, and other inspection tools.
  
• Practical knowledge of Microsoft Office (Word, Excel, Outlook).
  
• Knowledge of Epicor ERP 10 or similar Management/Manufacturing Information System.
  

• 
  
• High school diploma or general education degree (GED)
  
• Minimum two years of experience with Calypso Software and Zeiss CMM; five years preferred
  

• 
  
• Is not a United States citizen
  
• Is not lawfully admitted for permanent residence in the U.S.
  
• Does not have politically protected status (embassy, refugee, or asylum)
  
• Has dual U.S. / foreign citizenship
  

Allied Universal®, North America's leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve.

As a Armed Medical Center Security Officer in Deerfield Beach, FL, you will serve and safeguard clients in a range of industries such as Government, and more. Join Allied Universal as an armed patrol officer at a government location, monitoring assigned areas through routine patrols and a visible presence that helps reduce security-related incidents. You will respond to concerns, document activity, and communicate clearly with staff and visitors while delivering customer-focused service. Our agile, reliable, and innovative team leads with integrity and teamwork, supported by a caring culture that puts people first.

Position Type: Full Time

Pay Rate: $21.40 / Hour

Job Schedule:

Why Join Us:

• Smart Tools: Access to our exclusive technology to view and claim additional shifts to earn more.
• Career Growth: Get paid training and access to career growth opportunities.
• Financial and Health Benefits: Enjoy access to a retirement savings plan, plus medical, dental, vision, basic life and AD&D, and disability insurance.
• Exclusive Perks: Enjoy discounts on top brands and services through our Perks Program.

What You'll Do:

• Provide customer service to staff, visitors, and/or contractors while carrying out security-related procedures, site-specific policies, and when appropriate, emergency response activities at a government location.
• Conduct regular and random armed patrols of buildings, parking areas, and perimeter areas to help to deter unwanted activity and identify potential hazards and/or policy violations.
• Control access by checking identification, verifying authorization, managing vehicle and pedestrian entry points, and directing visitors according to post orders.
• Respond to incidents and critical situations in a calm, problem-solving manner, coordinating with local law enforcement and/or on-site personnel as needed.
• Complete detailed reports on patrol activity, incidents, and observations, and communicate relevant information to Allied Universal supervision and/or the client representative.

Minimum Requirements:

• Have 5+ years of security-related experience.
• Customer service experience is preferred.
• An armed guard card/license is preferred.
• Be at least 21 years of age for armed roles.
• Possess a high school diploma or equivalent.
• As a condition of employment, applicants will be subject to a background investigation in accordance with all federal, state, and local laws.
• Allied Universal will consider qualified applications with criminal histories in a manner consistent with applicable laws.
• As a condition of employment, applicants will be subject to a drug screen to the extent permitted by law.
• Participate in industry-specific security training programs.
• Licensing requirements are subject to state and/or local laws and regulations and may be required prior to employment.
• A valid driver's license will be required for driving positions only.

Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information:

If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit:

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:  

• This position is for a variety of shifts  

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.