Lateral Link Jobs in Usa
2,290 positions found — Page 7
Schedule: Every Saturday and Sunday 7:00am-7:30pm
As an MRI Technologist , you will perform a full range of MR (Magnetic Resonance) exams in accordance with established protocols. Adheres to the strict guidance of MR Safety policies and procedures. These functions are performed in accordance with all applicable laws and regulations and MedStar Georgetown University Hospital's philosophy, policies, procedures, and standards.
Join one of the largest healthcare systems in the Baltimore-Washington metro re gion, also recognized as one of the Healthiest Maryland Businesses. Apply today and learn how MedStar Health can be your next great career move!
Primary Duties:
- Performs full range of MR imaging procedures promptly on all patient types as specified by the protocol. The ability to perform venipuncture, injection of contrast media, and non-narcotic medication is required for effective diagnostic imaging and scanning. Must adhere to the direction, policy, and procedures as defined by physician modality director.
- Strict adherence to research guidelines for studies performed on patients participating in research studies. Adheres to the policies and procedures that apply to the performance of obtaining MR studies and MR guided procedures, including performing correct, exam, including laterality, on the correct patient at the time requested.
- Provides basic information to patients and/or families about procedures to be performed and can answer questions if asked. Assists with the upkeep of MR and related equipment, adhering to all related safety requirements and reports needed for equipment repairs. Can execute and enforce MR Safety standards and practices.
- Monitors equipment, analyses potential reasons for system malfunction, contacts the Biomedical engineering department and reports malfunction to log a ticket. Ensures timely completion of all exams through tracking, scanning, and other technical workflow as related to Radiology Information System (RIS, Enterprise Radiology Solutions (ERS) and EMR (Electronic Medical Record).
- Coordinates and collaborates with Technical Aides to ensure efficient room turnover. Coordinates, communicates, and collaborates with Patient Financial Associates that register radiology exams to minimize delays and potential safety issues for the outpatient population.
Qualifications:
- Vocational/Technical Diploma from an AMA approved school of Radiologic Technology; competency in didactic coursework and an ARRT-specified list of clinical procedures by completing competency requirements established for the discipline in which they are seeking certification and registration.
- ARMRIT (American Registry of Magnetic Resonance Imaging Technologists) or ARRT (American Registry of Radiologic Technology); with advanced certification in MR.
- BLS (Basic Life Support).
- 1-2 years' experience in a hospital setting preferred.
This position has a hiring range of : USD $35.68 - USD $64.71 /Hr.
Schedule: Every Saturday and Sunday 7:00am-7:30pm
As an MRI Technologist , you will perform a full range of MR (Magnetic Resonance) exams in accordance with established protocols. Adheres to the strict guidance of MR Safety policies and procedures. These functions are performed in accordance with all applicable laws and regulations and MedStar Georgetown University Hospital's philosophy, policies, procedures, and standards.
Join one of the largest healthcare systems in the Baltimore-Washington metro re gion, also recognized as one of the Healthiest Maryland Businesses. Apply today and learn how MedStar Health can be your next great career move!
Primary Duties:
- Performs full range of MR imaging procedures promptly on all patient types as specified by the protocol. The ability to perform venipuncture, injection of contrast media, and non-narcotic medication is required for effective diagnostic imaging and scanning. Must adhere to the direction, policy, and procedures as defined by physician modality director.
- Strict adherence to research guidelines for studies performed on patients participating in research studies. Adheres to the policies and procedures that apply to the performance of obtaining MR studies and MR guided procedures, including performing correct, exam, including laterality, on the correct patient at the time requested.
- Provides basic information to patients and/or families about procedures to be performed and can answer questions if asked. Assists with the upkeep of MR and related equipment, adhering to all related safety requirements and reports needed for equipment repairs. Can execute and enforce MR Safety standards and practices.
- Monitors equipment, analyses potential reasons for system malfunction, contacts the Biomedical engineering department and reports malfunction to log a ticket. Ensures timely completion of all exams through tracking, scanning, and other technical workflow as related to Radiology Information System (RIS, Enterprise Radiology Solutions (ERS) and EMR (Electronic Medical Record).
- Coordinates and collaborates with Technical Aides to ensure efficient room turnover. Coordinates, communicates, and collaborates with Patient Financial Associates that register radiology exams to minimize delays and potential safety issues for the outpatient population.
Qualifications:
- Vocational/Technical Diploma from an AMA approved school of Radiologic Technology; competency in didactic coursework and an ARRT-specified list of clinical procedures by completing competency requirements established for the discipline in which they are seeking certification and registration.
- ARMRIT (American Registry of Magnetic Resonance Imaging Technologists) or ARRT (American Registry of Radiologic Technology); with advanced certification in MR.
- BLS (Basic Life Support).
- 1-2 years' experience in a hospital setting preferred.
This position has a hiring range of : USD $35.68 - USD $64.71 /Hr.
Schedule: Every Saturday and Sunday 7:00am-7:30pm
As an MRI Technologist , you will perform a full range of MR (Magnetic Resonance) exams in accordance with established protocols. Adheres to the strict guidance of MR Safety policies and procedures. These functions are performed in accordance with all applicable laws and regulations and MedStar Georgetown University Hospital's philosophy, policies, procedures, and standards.
Join one of the largest healthcare systems in the Baltimore-Washington metro re gion, also recognized as one of the Healthiest Maryland Businesses. Apply today and learn how MedStar Health can be your next great career move!
Primary Duties:
- Performs full range of MR imaging procedures promptly on all patient types as specified by the protocol. The ability to perform venipuncture, injection of contrast media, and non-narcotic medication is required for effective diagnostic imaging and scanning. Must adhere to the direction, policy, and procedures as defined by physician modality director.
- Strict adherence to research guidelines for studies performed on patients participating in research studies. Adheres to the policies and procedures that apply to the performance of obtaining MR studies and MR guided procedures, including performing correct, exam, including laterality, on the correct patient at the time requested.
- Provides basic information to patients and/or families about procedures to be performed and can answer questions if asked. Assists with the upkeep of MR and related equipment, adhering to all related safety requirements and reports needed for equipment repairs. Can execute and enforce MR Safety standards and practices.
- Monitors equipment, analyses potential reasons for system malfunction, contacts the Biomedical engineering department and reports malfunction to log a ticket. Ensures timely completion of all exams through tracking, scanning, and other technical workflow as related to Radiology Information System (RIS, Enterprise Radiology Solutions (ERS) and EMR (Electronic Medical Record).
- Coordinates and collaborates with Technical Aides to ensure efficient room turnover. Coordinates, communicates, and collaborates with Patient Financial Associates that register radiology exams to minimize delays and potential safety issues for the outpatient population.
Qualifications:
- Vocational/Technical Diploma from an AMA approved school of Radiologic Technology; competency in didactic coursework and an ARRT-specified list of clinical procedures by completing competency requirements established for the discipline in which they are seeking certification and registration.
- ARMRIT (American Registry of Magnetic Resonance Imaging Technologists) or ARRT (American Registry of Radiologic Technology); with advanced certification in MR.
- BLS (Basic Life Support).
- 1-2 years' experience in a hospital setting preferred.
This position has a hiring range of : USD $35.68 - USD $64.71 /Hr.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact our Talent Specialist, Hari, at (224) 507-1278 .
Title
- Mechanical Drafting/CAD Technician II Duration: 12 Months (with potential for contract extension based on performance and CAD team needs) Location: On-site at Concord, NC (Hybrid schedule possible after fully trained) Work Environment: A hybrid work schedule is available, although significant time will be required to set it up (approx.
1 2 days onsite weekly depending on project needs).
Monday
- Friday, 8 am-5 pm base schedule High in-plant presence during the first 1 2 months (approx.
4 days/week).
Work Mode Onsite Hybrid o Heavy onsite work at the beginning (hands-on measurement and equipment familiarization).
o Hybrid flexibility later during modeling phases.
Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: As a member of the Downstream Platforms and Technology department, you will lead the drafting activities for a development program, creating, documenting, and managing electronic drawing files (Autodesk Inventor and AutoCAD) for custom-designed process equipment located in numerous worldwide Client Optical Fiber and Cable manufacturing locations.
In this role, you will take ownership of preliminary mechanical drawing packages from Engineering/Development and integrate them across multiple equipment configurations while maintaining equipment standardization and company drafting standards.
Complete all drafting work required for each drawing set before release into Autodesk Vault.
Drafting tasks include creating 3D models and associated drawings, as well as revising existing models and drawings, in accordance with company drafting standards.
Typical deliverables include detail, sheet metal, weldment, and assembly drawings.
Design mounting systems and layouts for mechanical, electrical, and pneumatic components, ensuring proper serviceability, usability, and integration within the overall system.
On-site presence is required to document existing system configurations on the production floor.
Hands on skills are desired to capture measurements, identify components, and develop an understanding of basic system functions Key Responsibilities: Create 2D drawings from existing 3D models.
Create 3D models of new components.
Collect data from engineering teams and incorporate information into appropriate drawings Collect measurements/information from the production floor to incorporate into drawings Submit drawing packages to be released through the Engineering Change Request (ECR) process.
Ensure all drawing packages comply with industry standards and safety regulations.
Required Education: Candidates should possess one of the following, but other technical degrees with demonstrated skills in drafting will be considered: A.A.S.
Mechanical Engineering Technology degree A.O.S.
Drafting/CAD degree Drafting Certificate/Certification Candidates without degrees must demonstrate proficiency in 2D and 3D drafting.
Required Experience and Skills: Minimum of 2 years of professional experience in the mechanical drafting field Working knowledge of ASME/ANSI drafting standards General Windows-based computer skills Proficient in the use of Autodesk Inventor and Autodesk Vault software Able to adapt to company standards and guidelines Ability to use basic measurement tools Strong work ethic Strong attention to detail Creative thinking Ability to safely operate and perform assigned tasks within a production environment Top 3 Required Skills 1.
Strong 2D Mechanical Drafting Experience o AutoCAD or Autodesk Inventor preferred.
o Must follow rigid industry and internal drafting standards.
2.
3D Modeling Experience o Any platform acceptable (SolidWorks, Inventor, etc.).
o Must model new components, modify brackets, hole spacing, layouts, etc.
3.
Hands-On Production Floor Experience o Ability to work safely on the production floor.
o Must use calipers, micrometers, tape measures to capture measurements directly from equipment.
o Confident interacting with technicians and operators.
Nice-to-Have Skills Experience with equipment teardown, mechanical troubleshooting, or hands-on mechanical hobby work (e.g., 3D printing).
Familiarity with Autodesk Vault or similar drawing release systems.
Creative technical thinking and ability to work independently.
Portfolio of start-to-finish drafting packages.
Interview Process Round 1: 30 minute phone/video screen with: o Hiring Manager o Possibly with supervisor o CAD Technician leader (to assess CAD capability) Round 2: Quick in person meeting (onsite or lunch).
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Autodesk Inventor, Autodesk Vault software, 2D drafting, ASME/ANSI, 3D drafting
Work history must include name of facility worked, city and state, title, department, and dates employed from the last 7 years.
Agency names are not accepted as the employer.
Highest level of education listed, including month/year of graduation and degree achieved if applicable.
Skills Checklist Completed within one (1) year of submittal for specialty where candidate is submitted Two (2) References Two (2) professional references from work history occurring within the past three (3) years.
One must be from a supervisor (charge nurses are considered supervisors).
Reference must include the full name (first & last name) of the person providing reference.
The name of the facility and the dates of employment must match the resume.
Reference must include a breakdown of skills and strengths with a rating score.
Letters of recommendation will not be accepted.
Online verification of professional license or certification Verified within 30 days of submission.
Nursys acceptable.
Placement Documents Export as PDF Online verification of professional license or credential Online verification of professional license completed within thirty (30) days of start and at time of extension.
For RN/LPN verification must be through Nursys.
12-panel drug screen Collected within sixty (60) days of start date; required annually.
Rapid or instant drug screens are not accepted.
Drugs to test: Amphetamines, Barbiturates, Cocaine, Marijuana, Methadone, PCP, Propoxyphene, Opiates, Benzodiazepines, Fentanyl, Meperidine, Tramadol.
Dilute results require a retest.
Physical Completed within one (1) year of start date; required annually.
May be signed by Physician, NP, PA, DO, or DC.
MMR Documentation Shown by proof of two (2) MMR vaccinations or positive IGG titers.
Will accept one vaccine or decline form for low/equivocal titers, Affiliate form acceptable.
Varicella Shown by proof of two (2) vaccinations, positive IGG titer, or provider verified history.
Decline form accepted for low/equivocal titers, Affiliate form acceptable.
Hepatitis B Shown by proof of vaccination series, positive surface antibody titer or declination Influenza Vaccine For Assignments occurring between 10/1-3/31 or Flu Shot Declination.
Affiliate declination form is acceptable.
Covid Documentation Proof of Covid vaccination or declination accepted.
Tdap Administered within ten (10) years of start date.
Will accept a decline form.
Agency form accepted.
TB Documentation TB skin test, TB QuantiFERON, or T-Spot completed within one (1) year of start date and annually thereafter.
Chest X-Ray within the past five (5) years for past positive TB cases as a result of TB exposure.
TB screening form is required (along with Chest X-Ray) and required annually Background Check Completed within thirty (30) days prior to start date and INCLUDES: National Criminal Check, FACIS Level III, National Sex Offender, all states and counties lived and worked in within the past seven (7) years, including for any aliases.
SSN and Address Trace are required.
OIG (Office of Inspector General) OIG completed within thirty (30) days of start date, and at time of extension.
Must be run for all alias names that appear on the SSN address trace.
SAM (System for Award Management) SAM completed within thirty (30) days of start date, and at time of extension.
Must be run for all alias names that appear on the SSN address trace.
Nebraska DHHS Central Registry Check Completed within sixty (60) days of start date and including Adult Protective Services and Child Abuse Neglect Registries Education Verification For highest level of education completed.
Required for licensed healthcare professionals only.
Specialty Competency Exam Completed within one (1) year of start date for the specialty corresponding to the CP's Assignment; required annually.
An 80% or passing rate is required.
Joint Commission Competencies Core I, II, and III completed within one (1) year of start date; required annually Valid state issued Drivers License or ID card State issued photo ID or state issued Drivers License required to be current at time of start.
Photo ID must be submitted to clients for identification verification.
Respiratory Fit Test 3M N95 or 1860 models.
The HCP has the option to have this completed the first day in CCH Occupational Health for
*** CPI or MOAB Certification Upload Current CPI or MOAB Certification.
HCP can start with this item pending but will be required to take the class offered at Columbus for
*** BLS
- Basic Life Support (American Heart Association) Auto Insurance HCP's will be required to show active proof of auto insurance with their HCP's name on it due to driving requirements Provided Documents Healthcare Provider Timekeeping Instructions Agency to download this document and provide to all HCP's prior to their start date.
HCP/ Affiliate Vendor responsible to enter time in Triage Plus no later than noon CST every Monday.
View Document
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries regarding the following opportunity, please contact our Talent Specialist Abdul, at (224) 507-1295 Job Title: Senior ServiceNow Administrator Location: Remote for initial 3 Months later candidate must be willing to relocate/work Onsite in Springfield, IL Duration: 5 Months with possible conversion to full time/Contract to Hire.
Working Hours: 37.5 hours per week, with 7.5 hours per day.
Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Job Description: Seeking a Senior ServiceNow administrator with a minimum of 6 years of experience in ServiceNow administration Position Summary As a Senior ServiceNow Administrator/CMDB Admin, you will play a critical role in supporting and enhancing our ServiceNow environment.
This includes the implementation, configuration changes, and maintenance of the ServiceNow platform.
You will work closely with IT and business stakeholders to develop and implement strategies that improve service management processes and leverage the full capabilities of the ServiceNow platform.
Key Responsibilities: Lead the administration and configuration of the ServiceNow platform, focusing on CMDB, Incident, Change, Problem, Service Catalog, and Service Level Management modules.
Develop, configure, and manage the CMDB to ensure an accurate representation of the IT infrastructure and its relationships, supporting ITSM processes.
Implement and maintain ServiceNow integrations with other enterprise systems and tools.
Design and develop custom applications, forms, workflows, interfaces, and scripts to automate and improve processes within ServiceNow.
Provide expert-level support for ServiceNow implementation projects, including configuration changes and maintenance activities.
Collaborate with IT and business teams to translate business requirements into technical solutions within ServiceNow.
Ensure the stability, integrity, and efficient operation of the ServiceNow platform that supports core organizational functions.
Conduct regular system audits to ensure data integrity and compliance with industry best practices and security standards.
Facilitate training and develop documentation to support end-users and internal teams.
Stay current with the latest ServiceNow features and updates, evaluating and recommending enhancements to our current setup.
Minimum Qualifications: Minimum of 6 years of experience in ServiceNow administration and configuration, with a specific focus on CMDB management.
Certified ServiceNow Administrator or ServiceNow Implementation Specialist certifications are preferred NOT a must-have.
Strong understanding of CMDB principles, IT infrastructure, and service modeling techniques.
Expertise in CMDB and Asset Management Services, showcasing a deep understanding of Business Services and Configuration item relationships.
Excellent problem-solving, analytical, and technical troubleshooting skills.
Education: Bachelor's degree in computer science, Information Technology, or related field or equivalent experience About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
ServiceNow, CMDB, troubleshooting skills
Arcticom offers impressive performance that is routinely recognized with exceptional ratings and commendations tied to installation successes.
Satisfied Bering Straits Native Corporation (BSNC) family customers include the U.S.
Air Force, Army, Navy, Coast Guard, the Departments of State, Justice, Commerce, Agriculture, Interior, Homeland Security, the General Services Administration, the Defense Logistics Agency and the U.S Census Bureau.
About this position: Senior IT Budget Analyst Location: Kansas City, MO The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job.
Other duties may be assigned.
To perform this job successfully, an individual must be able to satisfactorily perform each essential duty.
The requirements listed below are representative of the knowledge, skill and/or ability required.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the position.
Applicants will be notified via phone or email within ten (10) business days of submittal.
Essential Duties & Responsibilities Support budget analysis tasks that include monitoring budget reservations and executions, initiating execution of accounting transactions, analyzing and reconciling transactions with budget plans, and assuring compliance with regulations, directives, procedures, and guidelines.
Prepare and maintain business-line level spend plans and track funds reservations and execution by Standard General Ledger (SGL) account.
Support internally focused requirements/tasks and provide deliverables, which may include, but are not limited to, the following: reconciliation of accounts and income; assisting with analysis of reports, completion of documentation; preparation of document packages for audit review; and analysis of budget data.
Prepare, submit, and maintain Budget Object Code (BOC) Rollup Summary reports identifying planned requirements, SGL account execution, and expected rest-of-year requirements broken down by Mandatory, Center Capacity, and Discretionary.
Additional breakdowns showing current-month and rest-of-year amounts may be required.
The BOC Rollup Summary shall also include a version-over-version explanation of changes to spend plan amounts by BOC Rollup.
The BOC Rollup Summary reports shall be delivered at specified mid-month and end-of-month management briefing dates.
Prepare, submit, and maintain monthly Working Capital Fund (WCF) operating plan versus actual variance reporting results and explanations for current fiscal years using the required WCF tool & format.
The reporting results and related information shall be delivered no later than Thursday immediately preceding the monthly WCF Status of Funds (SoF) reporting deadline (typically the 15th of each month).
Prepare, submit and maintain monthly support services plan / actual usage reconciliation report with full-year trend analysis.
The report will be delivered at the mid-month management briefing.
Support externally focused requirements/tasks and provide deliverables, which may include, but is not limited to, providing other branches, offices, or agencies with budget data and analysis.
Both types of support and deliverables (internally focused and externally focused) will require synthesis and presentation of data, development of alternative courses of action, and recommendations to decision makers.
Increased requirements associated with end-of-year financial activities will likely result in the need for the employee to provide support that extends beyond a typical/standard work week (i.e.
40 hours) during the month of September.
Requirements may increase by approximately 25% during this timeframe.
The employee shall fully support such requirements.
Required (Minimum Necessary) Qualifications • Education Requirements: Minimum 6 years’ experience with Bachelor’s degree in relevant field • 3+ years’ specialized experience performing job specific tasks • US Citizenship • Able to obtain Public Trust clearance Knowledge, Skills, Abilities, and Other Characteristics • Advanced Microsoft Office Excel skills • Working knowledge of General Accepted Accounting Principles (GAAP) • Problem solving and analysis skills Preferred • N/A Supervisory Responsibilities • This position will not have supervisory responsibilities.
DOT Covered/Safety-Sensitive Role Requirements • This position is not subject to federal requirements regarding Department of Transportation “safety-sensitive” functions.
Necessary Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this role.
Employees must always maintain a constant state of mental alertness.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking or standing for prolonged periods of time; most of time is spent sitting in a comfortable position with frequent opportunity to move about.
Work Environment The work environmental characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of the role.
Employees must always maintain a constant state of situational awareness.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
The job is performed in an office setting with exposure to computer screens and requires extensive use of a computer, keyboard, mouse, and multi-line telephone system.
The work described herein is primarily in a modern office setting.
Occasional travel may be required.
Additional Qualifying Factors As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results.
If applicable to the contract, you must also obtain and maintain the appropriate clearance levels required and must also be able to obtain access to military installations.
Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job.
Bering Straits Native Corporation is an equal opportunity employer.
All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.
Verify new CNC programs prior to release on the shop floor utilizing Vericut.
Provide CNC-related support to Manufacturing Engineers and operator training during new/rebuilt machine startup and/or process improvements.
Provide daily operator support in the form of CNC programming and troubleshooting support to the shop floor.
Support and implement tooling & fixturing requirements associated with CNC machine tools.
Generate and support workstation instructions (methods) for CNC-related issues.
Initiate and lead process improvement projects to improve safety, quality, cost, and delivery.
Provide effective communication to appropriate team members when needed.
Work effectively as an individual and in a team-based environment in a matrixed organization.
Work effectively in a fast-paced environment while embracing and driving positive change inside and outside the organization when appropriate.
Requirements: Bachelor’s Degree, Associate’s Degree, or Machinist Apprentice (or similar) graduate with 3 years of experience with graphical-based CAM System CNC Programming OR High School Degree with 6 years of experience with graphical-based CAM System CNC Programming.
Required Skills: Experience with Siemens NX CAM (1953 or later).
Hands-on experience with Fast-hole EDM drilling.
Proficiency in generating toolpaths, including creating helper geometry to drive paths.
Experience with FANUC Macro B for probing, tool selection, data capture, and hole-location logic; comfortable reading and extending existing macros.
Familiarity with 3-2-1 (six-point) nesting and basic probing routines; working knowledge of CMM/metrology concepts.
Capable of implementing trigonometry and basic matrix rotations directly in code.
Strong problem-solving and organization skills, with above-average shop math skills in geometry and trigonometry.
Experience using Vericut or other CNC verification/machine simulation software.
Strong familiarity with multiple machine controls including Fanuc, Haas, Okuma, Siemens.
Demonstrated proficiency in interpreting drawing requirements.
Ability to multi-task and productively manage multiple projects concurrently.
Preferred Skills: Bachelor’s degree in Engineering or Machine Tool Technology.
Experience machining high-temperature superalloys found in HDGT or Aerospace components.
The PT
- Physical Therapist provides direct rehab care in physical therapy to patients upon physician referral in accordance with all applicable laws, regulations, and Life Care standards.Graduate of an accredited program in physical therapy, BSPT, MSPT, or DPT (2003 or later must have MSPT or DPT)Participates in community health matters/projects as appropriateProficient in Microsoft Word, Excel, and e mailKnowledgeable of practices and procedures as well as the laws, regulations, and guidelines governing functions in the post acute care facilityImplement and interpret the programs, goals, objectives, policies, and procedures of the departmentPerform proficiently in all competency areas including but not limited to: patient rights, and safety and sanitationMaintains confidentiality of all proprietary and/or confidential informationUnderstand and follow company policies including harassment and compliance proceduresDisplays integrity and professionalism by adhering to Life Care's Code of Conduct and completes mandatory Code of Conduct and other appropriate compliance trainingFollow physical therapy treatment plans for patientsOversee and evaluate care given by PTAs, Rehab Aides, and PT and PTA studentsUtilize therapy software appropriately and accuratelyExhibit excellent customer service and a positive attitude towards patientsRead, write, speak, and understand the English language
The PT
- Physical Therapist provides direct rehab care in physical therapy to patients upon physician referral in accordance with all applicable laws, regulations, and Life Care standards.Graduate of an accredited program in physical therapy, BSPT, MSPT, or DPT (2003 or later must have MSPT or DPT)Participates in community health matters/projects as appropriateProficient in Microsoft Word, Excel, and e mailKnowledgeable of practices and procedures as well as the laws, regulations, and guidelines governing functions in the post acute care facilityImplement and interpret the programs, goals, objectives, policies, and procedures of the departmentPerform proficiently in all competency areas including but not limited to: patient rights, and safety and sanitationMaintains confidentiality of all proprietary and/or confidential informationUnderstand and follow company policies including harassment and compliance proceduresDisplays integrity and professionalism by adhering to Life Care's Code of Conduct and completes mandatory Code of Conduct and other appropriate compliance trainingFollow physical therapy treatment plans for patientsOversee and evaluate care given by PTAs, Rehab Aides, and PT and PTA studentsUtilize therapy software appropriately and accuratelyExhibit excellent customer service and a positive attitude towards patientsRead, write, speak, and understand the English language
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY -- ESSENTIAL FUNCTIONS/DUTIES Evaluates system specifications, configures system, establishes standards, insures hardware/software compatibility and maintains workstations and Microsoft (MS) Windows Operating Systems for stable performance.
Employee will be responsible for the following functions/duties: Performs the daily operation of MS Win server software to include system security, appropriate access, configuration and backing up the system Specifies network requirements, monitors locate area network (LAN) performance, troubleshoots networking hardware and insures system is working properly according to specifications and parameters Organizes and secures directory structure and assists/trains staff members in the use of department.
Data Management (DM) System, associated databases and Configuration Management (CM)/DM release procedures Maintains and designs functional, visually esthetic web pages Specifies hardware requirements and provides a Computer Authorization and Custodial Receipt Listing (CA/CRL) to track equipment configurations and identification logs Serves as point of contact (POC) for problem reporting, incremental version updates and monitors yearly support contract Makes recommendations for future hardware/software implementations and related process improvements, schedules, plans and performs system upgrades including the transition from design, test, production and documentation environments Provides operational status as required Uses established policies and procedures and subject matter knowledge to complete complex assignments requiring originality and ingenuity performed under minimum supervision with considerable latitude for independent contribution.
DESIRED QUALIFICATIONS Experience with tools used for vulnerability assessment and compliance scanning such as Tenable/ACAS, ManageEngine Endpoint Central, or equivalent tools.
Knowledge of vulnerability remediation strategies is to address and mitigate security threats.
Experience with automation tools is highly valued, especially for streamlining IT processes and reducing manual intervention.
Strong skills in configuring and maintaining DHCP and DNS.
Proficiency in Exchange (on-premises) for managing corporate email systems.
Proficiency in Group Policy Management for enforcing security policies and user configurations across the organization.
Proficiency in managing virtualized infrastructures such as VMWare/Hyper-V/Nutanix is sought for efficient server and workload management.
Experience with automated deployment tools for deploying, updating, and managing endpoints at scale such as Microsoft Deployment Toolkit, Windows Deployment Services, SCCM, WSUS and ManageEngine Endpoint Central.
Knowledge in Microsoft SQL database administration for managing, maintaining, and optimizing databases.
Knowledge of PKI for implementing secure authentication, encryption, and digital certificate management.
Knowledge in PowerShell scripting for automating administrative tasks and system configurations.
Experience with backup and disaster recovery solutions such as Veeam Backup and Recovery, NetBackup, Acronis, or other similar products.
Active Secret Clearance or higher.
REQUIREMENTS -- EDUCATION, TECHNICAL, AND WORK EXPERIENCE Associates or higher degree in Computer/Information Technology, or equivalent academic/technical training.
Possess seven (7) years related experience or combination of experience in computer system basics and/or related areas of expertise.
Must possess and apply a broad knowledge of principles, practices and procedures in computer science, graphics, and information systems.
In addition, a Systems Administrator III must possess the following qualifications: Expertise with Windows Server (2016 or later) and/or Linux distributions such as Ubuntu, Debian, or Red Hat.
Proficient in PowerShell for automating administrative tasks.
Hands-on experience with VMWare of comparable virtualization platforms (e.g., Hyper-V, Nutanix).
Strong understanding of network protocols, firewall configuration, and server security best practices.
Experience managing Active Directory, Microsoft Exchange, backup and recovery solutions, endpoint management platforms (such as Microsoft Endpoint Configuration ManagerSCCM, Intune, ManageEngine Endpoint Central), and system monitoring tools.
Basic understanding of security principles such as authentication, authorization, and encryption; familiarity with common cyber threats (e.g., phishing, malware); awareness of patch management and best practices for securing systems and user accounts.
Must have specific experience in the use of MS window server environments and various computer-aided design/computer-aided manufacturing (CAD/CAM), database, MS Office and Web enabled applications Must possess planning/organizing skills and must be able to work under deadlines Employee is expected to routinely cross fields in the completion of somewhat difficult and varied assignments Must be capable of updating or repairing computer systems Must be able to obtain and maintain a government security clearance Must possess valid, state-issued driver's license SALARY The expected salary range for this position is $97,136.00 to $110,843.20 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4 considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Will be asked to make functional the initiatives established by management and will coordinate with other organizations as affected by upgrades, capabilities, policy and procedures.
Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting (up to 20 pounds), constant sitting and use of a computer terminal, constant use of sight abilities while writing, reviewing, and editing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a federal government contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certification and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: CSAN6, JIT13; JCORP12
Location: Florence, KY (CVG 100)
Shift: Wednesday/Thursday- Saturday, 6am-6pm. Person will be trained on First shift; Monday to Friday 6:00 am to 3:00 pm and later will need to work Wednesday/Thursday- Saturday, 6am-6pm (403/C)
JOB SUMMARY
Industrial Eng Technician I will support the Industrial Engineering Department in planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.Main focus will be assisting the IE in layout and process changes in production and entering data in IE related systems. ESSENTIAL DUTIES AND RESPONSIBILITIES
· Assist in the preparation of an area for a line move or process change
· Update the Product-Process-Time database (IEDB), as directed by the Industrial Engineer
· Update/Create production Visuals, as directed by the Industrial Engineer
· Order, receive and validate tooling, as directed by the Industrial Engineer
· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction
· Support the Lean organization by maintaining a solid process foundation and data integrity in order to support process improvement through the organization
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned
JOB QUALIFICATIONS/KNOWLEDGE REQUIREMENTS
· Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
· A minimum of 1-2 years of manufacturing engineering/Industrial Engineering or equivalent technical roles experience
· Eye for detail when updating systems
· Basic analytical ability
· Basic communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Location: Florence, KY (CVG 100)
Shift: Wed./Thurs.- Sat.- 6pm - 6am (404/D). Need to get trained on Monday to Friday 3:00 pm to 12:00 midnight shift and later work in 404 shift from Wednesday/Thursday- Saturday 6:00 pm to 6:00 am
JOB SUMMARYIndustrial Eng Technician I will support the Industrial Engineering Department in planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.Main focus will be assisting the IE in layout and process changes in production and entering data in IE related systems.ESSENTIAL DUTIES AND RESPONSIBILITIES
· Assist in the preparation of an area for a line move or process change· Update the Product-Process-Time database (IEDB), as directed by the Industrial Engineer· Update/Create production Visuals, as directed by the Industrial Engineer· Order, receive and validate tooling, as directed by the Industrial Engineer· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction· Support the Lean organization by maintaining a solid process foundation and data integrity in order to support process improvement through the organization· Comply and follow all procedures within the company security policy.· May perform other duties and responsibilities as assigned
JOB QUALIFICATIONS/KNOWLEDGE REQUIREMENTSKey Requirements:
· Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
· A minimum of 1-2 years of manufacturing engineering/Industrial Engineering or equivalent technical roles experience· Eye for detail when updating systems· Basic analytical ability· Basic communication skills· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
The opportunity
Delaware North Sportservice is hiring part-time Concessions Supervisors to join our team at TD Garden in Boston, Massachusetts. As a Concessions Supervisor, you will be responsible for leading team members to provide exceptional guest service.
If you thrive on excitement and want your workday to fly by, apply now to join the game day action.
Pay
$20.00 - $25.00 / hour
Information on our comprehensive benefits package can be found at .
What we offer
We care about our team member’s personal and professional well-being. Delaware North provides a benefits package designed to give you the comfort, safety, and security you need to deliver exceptional experiences for our guests. All team members receive benefits including:
- Weekly pay
- Training and development opportunities
- Employee discounts
- Flexible work schedules
Eligible team members may also receive: health, dental, and vision insurance, 401(k) with company match, paid vacation days and holidays, paid parental bonding leave, employee assistance program, and tuition and/or professional certification reimbursement.
What will you do?
- Assign duties to scheduled team members and assist with training
- Investigate and resolve complaints regarding food quality, service, or accommodations
- Manage labor and profit loss
- Ensure proper cash handling and tip record-keeping for the shift
- Assist guests, stock shelves, count inventory, and perform cashier duties when necessary
More about you
- Experience working in a restaurant is required
- Minimum of 2 years of supervisory experience preferred
- Must be able to implement rules and direct employees
- Ability to anticipate and fulfill guest needs while thriving in a fast-paced environment
- No college degree required
Physical requirements
- Constant standing, walking, bending, reaching, and repetitive motions
- Ability to lift stock to 50 pounds occasionally
- May be required to work outdoors or in variable temperatures, depending on the season
Shift details
Events
Holidays
Days
Evenings
Weekends
Who we are
Delaware North purchased the historic Boston Garden in 1975 and later constructed its successor, TD Garden, and neighboring The Hub on Causeway, both of which we continue to own and operate. As New England’s largest sports and entertainment arena, TD Garden is the home of the storied NHL’s Boston Bruins and NBA’s Boston Celtics franchises and hosts over 200 events annually with over 3.5 million visitors.
Our business is all about people, and that includes you. At Delaware North, you’re not just part of a team — you’re part of a global legacy: a family-owned company with 100+ years of history behind it. Our operations span the world, offering you unique paths to growth and success.
Who says you can't love where you work? With jobs in iconic sports arenas, stunning national parks, exciting casinos, and more, we pride ourselves on giving the world great times in great places. And whether you're interested in restaurants, hotels, sports, gaming, operations, or retail, part-time or full-time, we're invested in helping you achieve your career goals.
Together, we're shaping the future of hospitality — come grow with us!
Delaware North, along with its subsidiaries, is an equal opportunity employer, showcasing job opportunities and considering applicants for all positions without regard to race, color, religion, sex, gender identity, national origin, age, disability, protected veteran status, sexual orientation, or any other legally protected status.
Terry Soot Management Group (TSMG) is a field data collection company founded in 2017 in Europe.
We collect data where automation is not possible. We count features, take pictures, make videos, record speech, and scan areas for every detail you need to make more informed decisions. Our field data collection teams are spread across Europe and North America, ready to accept new challenges.
The goal of the project is to help collect images of streets, main points of interest and public areas. The project is performed on cars with 360 cameras mounted on top that image the area around the vehicle and store those images on computers inside the vehicle. Later, this data will be used to enhance one the most popular online maps in the world.
The data collectors will be given specific routes around public streets and areas, specifically targeting commercial districts and historical sites. Due to poor weather conditions some areas will be visited multiple times in order to collect the best quality of imaging. The project is expected to last at least 3 months and will cover different city/state zones.
The ideal candidate enjoys driving, knows well the area, traffic trends, is highly responsible and reliable.
The schedule expected on the project is Monday-Friday, 8 hours/day 40 hours per week. You can work more than 8 hours if you will.
Requirements:
- Must have a valid driver license (driving experience, 1-2 yrs minimum)
- Must have parking for a vehicle
- Must be authorized to work in the US
- Must pass the background check
- Enjoys driving, with flexible schedule
- Available for a minimum of 3 months
- Responsible & reliable
- Good driving skills
- Great communication skills
- High level of responsibility
- General car knowledge
- Tech savvy (smartphone and basic apps)
- Basic computer skills
- Self-motivated and detail oriented
We would be happy to get to know you and your skills better and see how we can support each other's growth.
Please apply and let's meet!
It all began with a single family-owned restaurant and the vision to give people something special: a connection to seafood and the coast. Over fifty years later, every seat in our over 500 restaurant family is an extension of that founding passion. We proudly set the table for our guests' favorite meals and moments because we are more than just a place to eat and work. We are part of the communities we serve, and this is where new friends become familiar faces.
Your responsibilities as a Host will include, but are not limited to:
- Welcoming every guest into our restaurant with a smile
- Accurately quoting wait times and managing reservations
- Catering to guests by providing special experiences
- Escorting guests to their table and providing a seamless experience
- Providing a warm farewell and invitation to return
- Focusing on your team and guests - every decision you make should always have the guest and team in mind
What it takes to succeed (physical job requirements):
- Must meet the minimum age requirement and authorized to work in the country you are applying
- Ability to bend, reach, stoop and lift up to 30 pounds safely
- Ability to move about the restaurant and remain standing for an 8 - 12 hour shift
- Team player with attention to detail and ability to multi-task
The physical demands described above are representative of those that must be met by employees to successfully perform this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position.
BIG plans are on the horizon for Red Lobster. Our team and restaurants are great today, but our future is even better. There is no better time than now to be a part of the Red Lobster Family!
We are proud to be an equal opportunity employer who provides a welcoming workplace for everyone. We are committed to providing equal employment opportunities to all employees and applicants without regard to age, race, color, religion, sex, national origin, sexual orientation, gender identity or expression, disability, or veteran status.
Shift: Wednesday/Thursday- Saturday, 6am-6pm. Person will be trained on First shift; Monday to Friday 6:00 am to 3:00 pm and later will need to work Wednesday/Thursday- Saturday, 6am-6pm (403/C)
JOB SUMMARY
Industrial Eng Technician I will support the Industrial Engineering Department in planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus will be assisting the IE in layout and process changes in production and entering data in IE related systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Assist in the preparation of an area for a line move or process change
· Update the Product-Process-Time database (IEDB), as directed by the Industrial Engineer
· Update/Create production Visuals, as directed by the Industrial Engineer
· Order, receive and validate tooling, as directed by the Industrial Engineer
· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction
· Support the Lean organization by maintaining a solid process foundation and data integrity in order to support process improvement through the organization
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned
JOB QUALIFICATIONS/KNOWLEDGE REQUIREMENTS
Key Requirements:
· Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
· A minimum of 1-2 years of manufacturing engineering/Industrial Engineering or equivalent technical roles experience
· Eye for detail when updating systems
· Basic analytical ability
· Basic communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Location: Florence, KY (CVG 100)
Shift: Wed./Thurs.- Sat.- 6pm - 6am (404/D) . Need to get trained on Monday to Friday 3:00 pm to 12:00 midnight shift and later work in 404 shift from Wednesday/Thursday- Saturday 6:00 pm to 6:00 am
JOB SUMMARY
Industrial Eng Technician I will support the Industrial Engineering Department in planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.Main focus will be assisting the IE in layout and process changes in production and entering data in IE related systems. ESSENTIAL DUTIES AND RESPONSIBILITIES
· Assist in the preparation of an area for a line move or process change
· Update the Product-Process-Time database (IEDB), as directed by the Industrial Engineer
· Update/Create production Visuals, as directed by the Industrial Engineer
· Order, receive and validate tooling, as directed by the Industrial Engineer
· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction
· Support the Lean organization by maintaining a solid process foundation and data integrity in order to support process improvement through the organization
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned
JOB QUALIFICATIONS/ KNOWLEDGE REQUIREMENTS
· Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
· A minimum of 1-2 years of manufacturing engineering/Industrial Engineering or equivalent technical roles experience
· Eye for detail when updating systems
· Basic analytical ability
· Basic communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Shift: Wednesday/Thursday- Saturday, 6am-6pm. Person will be trained on First shift; Monday to Friday 6:00 am to 3:00 pm and later will need to work Wednesday/Thursday- Saturday, 6am-6pm (403/C)
JOB SUMMARY
Industrial Eng Technician I will support the Industrial Engineering Department in planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus will be assisting the IE in layout and process changes in production and entering data in IE related systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Assist in the preparation of an area for a line move or process change
· Update the Product-Process-Time database (IEDB), as directed by the Industrial Engineer
· Update/Create production Visuals, as directed by the Industrial Engineer
· Order, receive and validate tooling, as directed by the Industrial Engineer
· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction
· Support the Lean organization by maintaining a solid process foundation and data integrity in order to support process improvement through the organization
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned
JOB QUALIFICATIONS/KNOWLEDGE REQUIREMENTS
Key Requirements:
· Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
· A minimum of 1-2 years of manufacturing engineering/Industrial Engineering or equivalent technical roles experience
· Eye for detail when updating systems
· Basic analytical ability
· Basic communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Shift: Wed./Thurs.- Sat.- 6pm - 6am (404/D). Need to get trained on Monday to Friday 3:00 pm to 12:00 midnight shift and later work in 404 shift from Wednesday/Thursday- Saturday 6:00 pm to 6:00 am
JOB SUMMARY
Industrial Eng Technician I will support the Industrial Engineering Department in planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus will be assisting the IE in layout and process changes in production and entering data in IE related systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Assist in the preparation of an area for a line move or process change
· Update the Product-Process-Time database (IEDB), as directed by the Industrial Engineer
· Update/Create production Visuals, as directed by the Industrial Engineer
· Order, receive and validate tooling, as directed by the Industrial Engineer
· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction
· Support the Lean organization by maintaining a solid process foundation and data integrity in order to support process improvement through the organization
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned
JOB QUALIFICATIONS/KNOWLEDGE REQUIREMENTS
Key Requirements:
· Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
· A minimum of 1-2 years of manufacturing engineering/Industrial Engineering or equivalent technical roles experience
· Eye for detail when updating systems
· Basic analytical ability
· Basic communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
