Kitchell Corporation Jobs in Usa

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We are looking to add a Production Supervisor (2nd shift). The position is 100% fully based in our office at Milpitas, California.

As a Production Supervisor (2nd shift) you will:

Job Description:

• Directs the activities of employees engaged in manufacturing activities including but not limited to training and supervising, maintaining a positive work environment, ensuring compliance with safety standards and established policies and procedures.
• Assign necessary manpower to support schedule demand on daily basis.
• Oversee product quality data collection, machine utilization and efficiency data tracking.
• Work with other production supervisors to resolve daily production issues such as material, delivery, quality, and employee performance.
• Meets production schedule and meets customer's expectations.
• Meets company's and customer's quality and workmanship standards.
• Supervises production line set-up including but not limited to testing and adjusting line equipment prior to operation and ensuring production line starts on schedule.
• Supervises all production activities performed by employees; maintains a high degree of visibility and access to employees throughout the shift.
• Monitors and reports daily production results, material usage, waste, and downtime.
• Reports equipment problems to appropriate department and operations manager.
• Coordinates with quality control to maintain quality standards; takes appropriate corrective measures to resolve deficiencies.
• Forecasts staffing needs to meet peak demands of the business and staff team accordingly; trains, motivates, coaches, rewards, and disciplines employees being supervised; resolves personnel issues.
• Manages personnel issues including but not limited to vacation approvals, timecard approval, daily and weekly overtime, hiring, and training.
• Performs other duties as assigned by manager.

Job Requirements:

• Degree or equivalent (three additional years of experience in lieu of degree may be considered).
• At least six years of work experience in PCBA manufacturing or PCBA contract electronics manufacturing industry.
• Must have experience in System Integration/Box Build
• Good communications skills.
• Strong leadership and hands-on production work experience.
• Excellent interpersonal skills.
• Knowledge and experience in MSOffice (Excel, Word) and Outlook.
• Commitment to excellence and high standards.
• Strong organizational, problem-solving, and analytical skills.
• Ability to manage priorities and workflow.
• Versatility, flexibility, and a willingness to work within constantly changing priorities with enthusiasm.
• Ability to work independently and as a member of various teams and committees.
• Proven ability to handle multiple projects and meet deadlines.
• Ability to deal effectively with a diversity of individuals at all organizational levels.

Yearly Salary Range: $83,000 - $87,000

2nd shift hours: 230P – 11P

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Global Venture Family.

Disclaimer:

By submitting your application to Venture Corporation Limited and its group of companies, you acknowledge and agree that any personal data you provide will be processed for the purpose of evaluating your application for employment.

If you are not selected for this position, we may retain your personal data to consider you for future employment opportunities unless you inform us otherwise. Should you wish to withdraw your consent or request access to or correction of your personal data, please contact our Personal Data Protection officer by email: For more details, please refer to our privacy policy at Personal Data Protection Policy of Venture Corporation Limited.

Venture Corporation is aware of scams involving fraudulent job offers; where individuals pose as staff representing our company and/or post fake job openings. Kindly note that the company does not make job offers until after a candidate has submitted a job application and participated in a face-to-face interview.

Please be advised that all legitimate job opportunities at Venture Corporation and our subsidiaries are listed exclusively on our official careers page and verified job portals. Any job offer that requires payment, or solicits personal information in the early-stage recruitment process is likely a scam.

We urge all candidates to remain vigilant and exercise caution when approached with suspicious job offers. If you have questions about any open positions at Venture Corporation, please contact us by email:

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: DeForest, WI

SHIFT: Rotating 1st and 2nd (2 week rotation)

SUMMARY: Assist in daily operations of the Rotogravure press.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:

• Participates in training, embrace concepts of and actively practice the STOP Safety Program fundamentals to aid American Packaging Corporation's efforts to achieve a zero-accident rate.
• Retrieves all necessary set up information/specifications/guidelines and follows instructions on the job jacket.
• Completes all machine changeover/set-up processes minimizing machine downtime and meeting or exceeding set-up standard requirements. Develop set up procedure documentation as required.
• Correctly completes daily production sheets, process condition sheets, waste logs, final release forms, ink paperwork and quality inspection logs. Ensure job order information (size, construction, print position, packing instructions, adhesive structures, proper substrates being used) corresponds with the product being manufactured.
• Safely, efficiently and effectively assists with the assigned production machinery equipment monitoring quality, production and waste adhering to all customer specifications.
• Ensures immediate work area and work areas for which Machine Operator has responsibility are free of clutter and debris. Perform all cleaning/sanitation responsibilities, safely using all required cleaning solutions and protective equipment.
• Removes rolls from rewind, hangs rolls on rewind, makes up doctor blades, preps print carriages, brings correct inks and lacquers to the press, configures ink ratios, disposes of ink, solvents and lacquers, maintains ink viscosities and cuts cores.
• Ability to operate the viscosity control system.
• Ensures all required on-line quality data is properly documented.
• Monitors all quality requirements as outlined by company procedure and specification. Completes necessary sheets for quality checks.
• Actively participates in safety programs and completes required safety observations. Understands and follows plant safety rules.
• Attends and participates in all scheduled meetings (Continuous Quality Improvement, safety, special projects, departmental, etc.).
• Able to work all scheduled shifts and required overtime hours.
• Trains new employees as necessary.
• Other duties as assigned.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

High school diploma or equivalent required. Previous manufacturing experience preferred.

LANGUAGE SKILLS

Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

REASONING ABILITY

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

PHYSICAL DEMANDS

The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions.

WORK ENVIRONMENT

While performing the duties of this job, the employee is regularly exposed to fumes or airborne particles. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to toxic or caustic chemicals and risk of electrical shock. The noise level in the work environment is usually loud.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at .

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Chili, NY

HOURS: Nights11pm- 7am

SUMMARY: Assist in the operation of the Laminator in the safest, most effective, and efficient manner while adhering to established quality standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Participate in training, embrace concepts of and actively practice the SPOT Safety Program fundamentals to aid American Packaging Corporation's efforts to achieve a zero-accident rate.
• Locate material for the present job and upcoming jobs so that the machine may operate efficiently.
• Sign onto and use recipe program to load process conditions onto the machine and enter all of the necessary process data.
• Properly flag rejects in master rolls accurately for next operation.
• Monitor pumping systems as outlined to maintain proper mix ratio.
• Understand and utilize all appropriate SOP's.
• Aid in mounting impression/transfer sleeves during changeovers.
• Read, understand, interpret and utilize all information received from both the job jackets, Product Specs and Material picking program.
• Perform and manage all necessary cleaning and housekeeping duties including cleaning the laminator, scrubbing all rollers and pumps, changing filters, picking up debris around the machine, end of order clean-up, and in-process machine laminator cleaning.
• Assist in machine set-up's/changeovers by utilizing the information on the job jacket and any necessary equipment. This includes preparing anilox rolls and sleeves for the laminator, changing anilox rolls, etc.
• Complete necessary quality checks at machine and complete check off paperwork.
• Attend and participate in all scheduled meetings (Continuous Quality Improvement, safety, special projects, departmental, etc.).
• Comply with all company policies and procedures.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE:

• High school diploma or GED
• Previous experience in APC manufacturing positions or specific industry related printing/laminating/bag making experience.
• Acceptable prior work history

LANGUAGE SKILLS

Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute percentages and interpret bar graphs.

REASONING ABILITY

Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.

OTHER SKILLS & ABILITIES

Candidate must possess/exhibit the following skills/abilities:

• Accuracy in recording
• Autocount
• Communication Skills: technical information, internal/external customers, all levels of employees
• Conflict Resolution
• Attention to detail.
• Ability to operate powered industrial trucks.
• Independence
• Mechanical aptitude
• Organizational skills
• Safety
• Shift work
• Teamwork

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is occasionally required to stand, walk, sit, reach with hands and arms, stoop, kneel, crouch or crawl, climb and balance. The employee is frequently required to use hands to finger, handle or feel objects, tools or controls. The employee is regularly required to talk or hear and taste or smell.

This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, distance and the ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee works near moving mechanical parts and is exposed to fumes or airborne particles (works in an environment where solvent based inks are used). The employee frequently works in high, precarious places, in humid conditions (summer humidity, plant is not air conditioned), and is exposed to electrical shock (only authorized maintenance personnel are allowed access to electrical cabinets).

The noise level in the work environment is usually loud. Hearing protection is mandated.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Story City, IA

SUMMARY: We are seeking a motivated Product Development Engineering Intern to support our engineering teams in developing and optimizing flexible packaging solutions. This role provides hands-on experience with material selection, packaging design, testing, and process improvement in a manufacturing environment.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

* Participate in training, embrace concepts of and actively practice the STOP Safety Program fundamentals to aid American Packaging Corporation's efforts to achieve a zero accident rate.

* Familiarity with the principles and requirements of ISO 9000, ISO 14001, AIB, and SQF.

* Qualify new and alternate materials.

* Monitor Quality Assurance system to ensure that current procedures/testing correlate with customer requirements.

* Update system/procedures as required and develop appropriate procedures to complete assigned projects.

* Manage in-plant trials through conducting pre-trial planning meetings, directing on-line manufacture of trial materials, documenting results of trials and ensuring trial results are met.

* Attend and participate in all company mandated meetings.

* Other duties as assigned.

QUALIFICATION REQUIREMENTS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

Pursuing a Bachelor's degree in Packaging Science.

Experience with lab equipment such as tensile tester, heat sealer, etc.

Experience with Microsoft Excel

Ability to gather data competently into a report format

Statistical Experience is optional

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public.

MATHEMATICAL SKILLS

Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.

REASONING ABILITY

Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS

The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 10 pounds.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Chili, NY

HOURS: Days 7am - 7pm on a 2-2-3 schedule

SUMMARY: Assist in daily operations of the Finishing Department.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:

• Participates in training, embrace concepts of and actively practice the STOP Safety Program fundamentals to aid American Packaging Corporation's efforts to achieve a zero-accident rate.
• Retrieves all necessary set up information/specifications/guidelines and follows instructions on the job jacket.
• Safely, efficiently and effectively assists with the assigned production machinery equipment monitoring quality, production and waste adhering to all customer specifications.
• Ensures immediate work area and work areas for which Machine Operator has responsibility are free of clutter and debris. Perform all cleaning/sanitation responsibilities, safely using all required cleaning solutions and protective equipment.
• Monitors all quality requirements as outlined by company procedure and specification. Completes necessary sheets for quality checks.
• Actively participates in safety programs and completes required safety observations. Understands and follows plant safety rules.
• Attends and participates in all scheduled meetings (Continuous Quality Improvement, safety, special projects, departmental, etc.).
• Able to work all scheduled shifts and required overtime hours.
• Trains new employees as necessary.
• Other duties as assigned.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) required. Previous manufacturing experience preferred.

LANGUAGE SKILLS

Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

REASONING ABILITY

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. The employee is occasionally required to walk and reach with hands and arms. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to airborne particles and vibration. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

American Packaging Corporation (APC) is one of the top flexible packaging converters serving customers throughout North America. We are always seeking to improve our operations, deliver more innovation and value, and give back to our local communities. Our longstanding success as custom flexible packaging suppliers has been fueled by our commitment to providing more innovation, more quality, and more responsive customer service, along with our strategic investments in the latest technology.

LOCATION: Chili, NY & Rochester, NY

SUMMARY: Responsible for overall statistical process control software setup by safely performing all testing procedures and ensuring conformance to established specifications. Additionally, manage shift quality improvement initiatives through training, awareness, and analysis of facts and data.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Participate in training, embrace concepts of and actively practice the STOP Safety Program fundamentals to aid American Packaging Corporation's efforts to achieve a zero accident rate.
• Implementation of SPC Software Package.
• Analyze trends in production/process data through statistical evaluation methods.
• Determines test objectives and standards by studying software requirements; writing test cycle plans, test cases, and test scripts.
• Meets test objectives by determining testing methods, cycles, phases, and conditions; setting up testing environment and equipment.
• Identifies software capability and reliability by conducting functional, system, and performance tests and resolves testing problems.
• Completes tests by training and directing others that will use the system.
• Maintains testing database by developing defect tracking and regression testing information requirements; designing information system; enters test outcomes; secures data.
• Reports test outcomes by collecting, analyzing, interpreting, summarizing, and displaying data; recommending software changes.
• Maintains test environment by developing test environment; enforcing and complying with procedures, rules, and regulations.
• Assist Quality Assurance Manager in determining Process Capabilities within the Laboratory and out on the Production Floor.
• Assist with raw material and/or quality issues; i.e., completion of and facilitation of reject/hold forms, supplier certification, customer complaint investigations, etc.
• Maintain Manufacturing Specifications and Operating Specifications.
• Analyze and Recommend Optimal QA Testing Requirement.
• Support Process/Product Trials through active involvement with Suppliers/Vendors, Customers, Manufacturing and Technical.
• Maintain a safe and organized laboratory area.
• Review and accurately file all production test data.
• Maintain and update Raw Material Specification files.
• Review, verify and file all Supplier Certifications.
• Prepare, verify and submit requested COA's for customers.
• Attend and participate in all scheduled meetings (Continuous Quality Improvement, safety, special projects, departmental, etc.).
• Strictly adhere to all company uniform guidelines.
• Any other duties as assigned.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• EDUCATION and/or EXPERIENCE: Bachelor's degree (B.A.) from a four year college or university, preferably in Statistics, with interest in aspects of Math, Computer Science and Engineering. In addition, candidates with experience in Test Driven Development (TDD), strong knowledge and understanding of test methodologies, demonstrated technical ability to understand test code and familiarity with quality assurance processes/procedures is preferred. Also, experience preferred with SQL, Microsoft Office Suite and SPC software programs such as Zontec, WinSPC, STAT Graphics, etc. Ability to work in a fast paced, rapidly changing environment with minimum supervision.
• LANGUAGE SKILLS: The ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, SOPs and governmental regulations. Ability to write reports, business correspondence and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers and the general public.
• MATHEMATICAL SKILLS: Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute rate, ratio and percent and to draw and interpret bar graphs. Ability to apply concepts of basic algebra and statistical process control. Ability to measure accurately using a graduated ruler.
• REASONING ABILITY: Ability to define problems, collect data, establish facts and draw valid conclusions. Ability to interpret extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is frequently required to stand and use hands to finger, handle or feel objects, tools or controls. The employee is occasionally required to sit, reach with hands and arms, walk, stoop, kneel, crouch or crawl and climb or balance. The employee is regularly required to hear.

This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, distance vision, ability to adjust focus, depth, and color vision. Employee must also be able to taste/smell.

WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Exposure to wet/humid conditions due to manufacturing plant not being air conditioned.

• The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position please contact our Human Resources department at .

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

Customer Account Specialist

LOCATION: Rochester, NY

SCHEDULE: Monday - Friday 8am-5pm

SUMMARY: To professionally and effectively communicate with customers and respond to customer requests for order placement, delivery of finished goods, quotations and all other inquires or requested information. To service both the external and internal customer by accurately and efficiently processing information by means of systems and procedures.

REPORTS TO: Customer Service Manager

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Participate in training, embrace concepts of and actively practice the SPOT Safety Program fundamentals to aid American Packaging Corporation's efforts to achieve a zero-accident rate.
• Verify purchase order information with customers.
• Request customer numbers and specification sheets from the appropriate departments as needed.
• Data entry of information into the AS400/Radius order entry programs (create item numbers, etc.)
• Identify and collect all information required for creating orders.
• Authorize and provide information for invoicing all graphics related preparation, plate, and cylinder costs.
• Follow Up with scheduling until acknowledged have ready date is acquired.
• Distribute order to appropriate departments and send out order acknowledgment to customer.
• Processing all changes to orders when required.
• Create shipping releases in AS400/Radius program, make any needed changes, and track open shipments.
• Track open releases, verify finished goods availability, and notify customer of any quantity deviation.
• Generate account specific reports including but not limited to inventory of finished goods, raw materials, order status as needed.
• If applicable, maintain Vendor Managed Inventory programs through weekly reporting to customer. Some programs also require that the customer account specialist place the orders for the customers under specific guidelines set by them.
• Investigate all customer related inquires. Expedite information to customer, sales representative, and/or manufacturing including, but not limited to the processing of price quotations, samples, brochures, or any other pertinent information necessary in obtaining or maintaining new business.
• Monitor aged inventory and communicate procedures to customers, and APC Sales team to ensure timely pre-billing and/or shipping of aged inventory.
• Professionally and effectively respond to any and all customer complaints through following procedures:
• I. Retrieve required and appropriate information from customer or sales.
• II. Complete and distribute complaint form to appropriate departments, provide photos to APC's Quality department, and request samples from the customer.
• III. Follow up until appropriate disposition of complaint is provided.
• IV. Provide corrective action to customer, ensuring satisfactory resolution.
• Investigate and provide the necessary information to both external and internal customers as may be requested or deemed necessary, which may not be specifically outlined above.
• Attend and participate in all scheduled meetings (Continuous Quality Improvement, safety, special projects, departmental, etc.).
• Comply with all company policies and procedures.
• Business travel (infrequent) may be required.
• Other duties as assigned.

Roto/FPL Specific duties:

• Provide graphics department with order information for artwork processing - entering design validation requirements - some customers may have more complexity/requirements due to how frequently they change and the volume
• Generate final order from AS400/Radius with all required information for sign off by appropriate departments.
• Complete and supply all necessary components included in Final Order Job Jacket(s).

QUALIFICATION REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

Advance degree from accredited college or university, three years related experience and/or training. Will consider an equivalent combination of education and experience.

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply, and divide in all units of measure using whole numbers,

common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw

and interpret bar graphs. Ability to calculate figures and amounts such as discounts,

interest, proportions, and percentages.

REASONING ABILITY

Ability to solve practical problems and deal with a variety of concrete variables in

situations where only limited standardization exists. Ability to interpret a variety of

instructions furnished in written, oral, diagram, or schedule form.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit, and use hands to finger, handle or feel objects, tools or controls. The employee is occasionally required to reach with hands and arms, stand, walk, stoop, kneel, crouch or crawl and climb or balance. The employee is regularly required to hear. The employee must occasionally lift and/or move up to 30 pounds. Any lifting over 30 pounds would require assistance. Specific vision abilities required by this job include close vision, distance vision and the ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Columbus, WI

SHIFT: 3rd (11pm-7am)

SUMMARY: Operate the pouching machine in the safest, most effective and efficient manner while adhering to established quality standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:

• Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
• Participate in training, embrace concepts of and actively practice the SPOT Safety Program fundamentals to aid American Packaging Corporation's efforts to achieve a zero-accident rate.
• Participate in developing, understanding and following all SOP's.
• Read, understand, interpret and utilize all information retrieved from job jackets, manufacturing specifications, pouch specifications and print spec sheets.
• Perform and manage all necessary cleaning and housekeeping duties.
• Perform and manage machine set-ups/changeovers by utilizing the information on the job jacket and the pouch specification.
• Possess a thorough understanding of the quality standards associated with running a pouch machine. Conduct, document, interpret and act upon all data obtained during QA tests.
• Understand the bar code system in order to properly scan all raw materials used in production to ensure accurate inventory control. Able to produce new tickets for all finished goods inventory and return to stock unused materials.
• Complete all required paperwork accurately and in a timely manner. This includes Shop Floor Reports which document production, waste, set up time and downtime and all Quality Assurance tests.
• Successfully set up machine to customer specifications.
• Successfully troubleshoot all mechanical problems and apply corrective action as needed. Make decision to contact the Maintenance Department when appropriate.
• Perform minor machine maintenance such as oiling/greasing machines.
• Safely operate all necessary roll handling equipment to load work in process rolls onto machine.
• Produce pouches within customer specifications while completing all necessary quality testing.
• Attend and participate in all scheduled meetings, safety, special projects, departmental, etc.).
• Comply with all company policies and procedures.
• Any other duties as assigned.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE:

• High school diploma or GED
• Previous experience in APC manufacturing positions or specific industry related printing/laminating/pouch making experience.
• Acceptable prior work history

LANGUAGE SKILLS

Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute percentages and interpret bar graphs.

REASONING ABILITY

Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists. Ability to troubleshoot machine and make necessary adjustments to keep product within customer specifications. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is frequently required to stand, walk, sit, reach with hands and arms, stoop, kneel, crouch or crawl, climb and balance. The employee is regularly required to use hands to finger, handle or feel objects, tools or controls. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, distance and the ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee works near moving mechanical parts. The employee is exposed to electrical shock (only authorized maintenance personnel are allowed access to electrical cabinets). The noise level in the work environment is usually loud. Hearing protection is mandated.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.