Jt4 Llc Remote Jobs in Usa

** This requisition is for Jump Start Program applicants only.

For complete information on the Jump Start program, visit
** JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.

Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.

JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and air crews for today's missions and tomorrow's global challenges.

This job announcement encompasses multiple openings in a variety of electronics disciplines: Beacons, Digital Electronics, Ground and Auto-tracking radar systems, GPS, IFF, Mechanical, Microwave, Measurements, TCP/IP, Telemetry, Communications, and Video.

Individuals will work on various types of electronic equipment and related devices by performing a combination of the following: installing, maintaining, repairing, overhauling, troubleshooting, modifying, constructing and testing.

Equipment may include, but is not limited to, the following: transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high voltage power supplies and keying circuits, indicators and displays, antenna positioning systems, Ethernet interface equipment, digital-to-analog conversion equipment and analog strip chart recorders.

Work requires practical application of electronic principles, ability to determine equipment malfunctions, and skills to put equipment in required operating conditions.

The daily accomplishment of electronic logbook entries, problem reporting and documentation of corrective actions are required.

Working Conditions: Work hours and shifts may vary and require occasional overnights or weekend work at remote locations.

Occasionally perform assigned tasks indoors/outdoors in a field environment involving low light and moderate noise.

May occasionally climb towers and ladders or perform work in confined spaces.

Lift up to 50 pounds.

MINIMUM TECHNICAL QUALIFICATIONS Completion of Jump Start core classes (Math 111B, ET 131B DC for Electronics lab, ET 132B AC for Electronics lab, ET 212B Digital Logic I, ET 220B; Solid State Devices and Circuits I, and ET 228B: Data Acquisition) with a 3.0 GPA or higher.

Possess a good understanding of electronics and the test equipment used to maintain and repair various electronics equipment.

Other Minimum Qualifications: Must be able to qualify for and maintain a DoD Top Secret/SSBI security clearance and be adjudicated to the tier process for access to specific programs.

Possess a valid State issued driver's license.

DESIRED QUALIFICATIONS Ability to troubleshoot to the component level and make needed repairs Working knowledge of Microsoft Office (Access, Excel, and Word) Working knowledge of tubes, transistors, logic gates and high-power R.F.

sources Active Secret/Top Secret Security Clearance OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.

WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.

Occasional lifting (up to 20 pounds), constant sitting and use of a computer terminal; constant use of sight abilities while writing, reviewing, and editing documents, constant use of speech/hearing abilities for communication; and constant mental alertness are required.

DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.

They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.

Tasking is in support of a federal government contract that requires U.S.

citizenship.

Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.

SCC: JOM68; JELT4; JCORP12

JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.

Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.

JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and air crews for today's missions and tomorrow's global challenges.

This job announcement encompasses multiple openings in a variety of electronics disciplines.

The disciplines include: Beacons, Digital Electronics, Analog Electronics, Ground Radar and Auto-tracking radar systems, GPS, IFF, Microwave, Measurements, TCP/IP, Telemetry, Communications, and Video.

Selected applicants will work on various types of electronic equipment and related devices by performing a combination of the following: installing, maintaining, repairing, overhauling, troubleshooting, modifying, constructing and testing.

Equipment may include, but is not limited to, the following: transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high voltage power supplies and keying circuits, indicators and displays, antenna positioning systems, Ethernet interface equipment, digital-to-analog conversion equipment and analog strip chart recorders Work requires practical application of electronic principles, ability to determine equipment malfunctions, and skills to put equipment in required operating conditions The daily accomplishment of electronic logbook entries, problem reporting and documentation of corrective actions are required PREFERRED KNOWLEDGE/EXPERIENCE Five (5) years of hands-on experience.

Good understanding of tubes, transistors, logic gates and high-power R.F.

sources.

Full ISCET, ETA or FCC Radar endorsement certification.

Education and course work from an ABET accredited technical school with one or more courses in Math, Basic Electronics, Microwave Theory, Telecommunications, Telemetry, and or RF disciplines.

Possess a current TS-SSBI Security Clearance.

REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE Level II: Education and/or training from an accredited college or technical school with courses in math, basic electronics, and microwave theory or a military equivalent is required.

At least 3 years of hands-on experience is required.

Level III: Associate's degree or higher from an accredited college or technical school with courses in math, basic electronics, and microwave theory or CCAF military equivalent is required.

At least 7 years of hands-on experience is required.

In addition, Electronic Technicians must meet the following qualifications: Demonstrated proficiency in general electronics (to include AC, DC, digital logic, data acquisition & solid state) and working knowledge of electronic, electro-mechanical, and computer systems along with test equipment used to maintain and repair equipment is necessary.

Experience with tubes, transistors, logic gates, and/or high-power RF devices may be required.

Demonstrated ability to troubleshoot to the component level and competency in soldering.

Possess an intermediate working knowledge of Microsoft Office (Access, Excel, and Word).

Must be able to qualify for and maintain a DoD Top Secret/SSBI security clearance and be adjudicated to the tier process for access to specific programs.

Must possess a valid State issued driver's license.

OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to the employee's job.

WORKING CONDITIONS Work hours and shifts may vary and require occasional overnights or weekend work at remote locations.

Occasionally perform assigned tasks indoors/outdoors in a field environment involving low light and moderate noise.

May occasionally climb towers and ladders or perform work in confined spaces.

Lift up to 50 pounds.

DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.

They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.

Tasking is in support of a federal government contract that requires U.S.

citizenship.

Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.

SCC: JOM68; JELT4; JCORP12

JT4 provides engineering and technical support to multiple western test ranges for the U.S.

Air Force and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.

We develop and maintain realistic integrated test and training environments, and prepare our nation's war-fighting aircraft, weapons systems, and air crews for today's missions and tomorrow's global challenges.

JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES JT4 is seeking entry level to senior level analysts for career opportunities in broad and diverse fields with career advancement.

JT4 is the prime contractor delivering engineering and technical services to develop and test leading-edge technologies for our nation's aircraft weapon systems and aircrews across open air test ranges.

Analytical disciplines that align with on-going technical services include aeronautical, computer, digital signal processing, electrical engineering, RF (air and ground-based), statistical analysis, software, and telecommunication.

All science, technology, engineering, and mathematical disciplines will be considered for employment opportunities.

Analysts will report on complex EW, RF, and communication protocol test articles, providing a comprehensive analysis on the operation, suitability, and sustainment of a variety of Department of Defense weapons and systems.

Strong mathematical skills, logic, and the ability to rise and achieve successes will make you a solid candidate.

Opportunities exist at all JT4 operating locations including Nevada, Utah, Colorado, and California.

Responsibilities vary from entry level analytical problem-solving to leading teams in understanding and reporting complex technical solutions.

Examples of job responsibilities include: Perform as an EW, RF, and/or Protocol Subject Matter Expert in a specialized area Analyze complex data sets, providing statistical computations and resolving data anomalies Provide graphical analysis and representations of large data sets Develop reports and briefings to outline success or failure of a test article and generate recommendations for future development Interface between instrumentation engineers and test customers to ensure that parametric data required is available for test data analysis and accurately reflects the system configuration and operational characteristics Develop reports and briefings to outline success or failure of a test article and generate recommendations for future development Provide detailed technical expertise on the test process, range environment, and test infrastructure capabilities Create and analyze pre-test predictions in order to design test events, develop ground or flight profiles, define data collection requirements, and create go/no-go criteria to meet complex test objectives Brief complex mission execution plans as well as direct test activities from control centers REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE US-only citizenship and eligibility for a Department of Defense Top Secret security clearance are required.

Applicants must have a valid state-issued driver's license.

Minimum requirements/experience for each level listed below: Operations/Test Analyst I Completion of technical training and 4 years of related experience; or an Associate's degree and 2 years of related experience or a related Bachelor's degree (engineering, math, computer science, or physics).

Operations/Test Analyst II Technical training and 7 years of related experience; or an Associate's degree and 4 years of related experience; or a related Bachelor's degree (engineering, math, computer science, or physics) and 2 years of related experience; or a related Master's degree.

Operations/Test Analyst III Completion of technical training and at least 10 years of related experience; or an Associate's degree and 7 years of related experience; or a related Bachelor's degree (engineering, math, computer science, or physics) and 4 years of related experience; or a related Master's degree and 2 years of related experience.

Operations/Test Analyst IV Completion of technical training and at least 14 years of related experience; or an Associate's degree and 11 years of related experience; or a related Bachelor's degree (engineering, math, computer science, or physics) and 8 years of related experience; or a related Master's degree and 6 years of related experience.

Operations/Test Analyst V Completion of technical training and at least 20 years of related experience; or an Associate's degree and 16 years of related experience; or a related Bachelor's degree (engineering, math, computer science, or physics) and 14 years of related experience; or a related Master's degree and 10 years of related experience.

Operations/Test Analyst VI Bachelor's degree (engineering, math, computer science, or physics) and 20 years of related experience; or a related master's degree and 16 years of related experience.

The incumbent must understand concepts, principles, and practices of engineering and analysis to enable the employee to serve as a technical authority on projects relating to the specific programs.

The position requires knowledge and skill sufficient to apply the latest developments in technology to solve problems in the specialty area.

The incumbent must maintain excellent communications and analytical skills and working knowledge of computer systems and integrated software application programs.

Must qualify for and maintain a government security clearance and possess a valid state issued driver's license.

DESIRED QUALIFICATIONS The ideal candidate will have a technical degree focusing on science, technology, engineering, or mathematics.

Former military or Government experience highly desired.

Open-air RF or closed-loop protocol testing preferred for most positions.

Some positions focus on Software Development and Testing.

OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to his/her job.

WORKING CONDITIONS This position involves work typical of an office environment with no unusual hazards.

There is occasional lifting up to 20 pounds, constant sitting with occasional use of a computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.

Routine travel to remote Company work locations may be required.

DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.

They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.

Tasking is in support of a federal government contract that requires U.S.

citizenship.

Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.

SCC: JOTDA18; JCORP12

JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.

Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.

JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.

JT4 is seeking a Senior Manager for our Developmental Engineering team at the historic Edwards Air Force Base, "The Center of the Aerospace Testing Universe." JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES Are you a visionary leader ready to make a significant impact on flight test innovation? JT4 is seeking a Senior Manager for our Developmental Engineering team at the historic Edwards Air Force Base, "The Center of the Aerospace Testing Universe." In this pivotal role, you will build and lead a dedicated team of software and hardware professionals who are at the forefront of testing and developing next-generation technology for the U.S.

Air Force.

This is more than a management position; it is an opportunity to shape the future of developmental engineering, drive mission-critical projects, and mentor the next generation of technical leaders, all while supporting our nation's warfighters.

If you have a proven track record in a development environment and a passion for leading high-performing teams, we invite you to bring your expertise to a place where history is made every day.

Core Responsibilities As a key member of the JT4 leadership team, you will: Lead & Inspire: Guide, mentor, and develop a multidisciplinary team of computer scientists, engineers, programmers and technical professionals, fostering a culture of collaboration, innovation, and continuous improvement.

Drive Technical Excellence: Establish and oversee the technical and procedural guidelines for all software, hardware and firmware development projects, ensuring alignment with both JT4 and customer requirements.

Strategic Project Management: Apply your deep knowledge of project management and systems engineering to manage project portfolios, maintain operational status, and adjust priorities to meet ambitious schedules and budget targets.

Develop and manage annual cost estimates and deliver insightful monthly performance reports to both JT4 leadership and our customers.

Champion Compliance & Quality: Uphold and monitor the highest standards of Safety, Security, Training, Configuration Management, and Quality Assurance across the department, ensuring all goals and standards are consistently met.

Foster Customer & Stakeholder Relationships: Serve as a senior technical spokesperson, coordinating directly with a diverse range of customers to guarantee their requirements are met with excellence and satisfaction.

Shape the Future: Actively recruit, interview, and build a world-class Mentor employees and develop career progression plans focused on growth and retention.

What You'll Need to Succeed To thrive in this role, you should have a blend of technical expertise, strategic thinking, and exceptional leadership skills.

Required Qualifications: Extensive and demonstrated history of success in a development and/or flight test Proven expertise in project management and developmental engineering Strong leadership capabilities with experience supervising and developing technical Ability to work independently, as part of a team, and as a senior representative for technical Must be a US Citizen and able to obtain and maintain a security Preferred Qualifications: Bachelor's or Master's degree in Engineering, Computer Science, or a related technical Experience working in a DoD contracting Familiarity with JT4's mission and Professional certifications (e.g., PMP, Sec+, Etc).

REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE A bachelor's degree, or equivalent formal academic or technical training and experience, and an in-depth knowledge of the principles of advanced management obtained through formal or self-study, or in-depth working knowledge of related career fields such as technical trades or scientific and engineering professions and 12 years of experience in one of the related fields and a minimum of four (4) years of experience in a managerial or supervisory role are required for this position.

In addition, a Department Manager II must possess the following qualifications: Understanding of the operational philosophy and business nature of the company Familiar with computer-based management tools Excellent verbal and written communication skills Planning/organizational skills Ability to work under deadlines Must possess a valid, state issued driver's license.

Must be able to obtain and maintain security clearance.

Must be a U.S.

citizen.

SALARY The expected salary range for this position is $160,000 to $200,000 annually.

Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.

JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.

BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.

WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.

Occasional lifting (up to 30 pounds), constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.

Travel to remote company work locations may be required.

DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification.

They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of persons so classified.

Tasking is in support of a Federal Government Contract that requires U.S.

citizenship.

Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.

SCC: JABO33, A1412TW

JT4 China Lake is seeking an Environmental Safety and Health (ES&H) Specialist.

The role is responsible for assisting in providing support, analyzing, investigating, and reporting matters pertaining to ES&H issues.

This position will also involve tasks with work place hazards and inspections to ensure compliance with Navy regulations and OHSA standards.

JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.

Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.

JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
**An ideal candidate will have an active Secret clearance
** **This position is located at Point Mugu and is not eligible for telework
** Job Summary -- Essential Functions/Duties Wo Working under general direction of senior department personnel, an ES&H Specialist III performs moderately complex technical work in a wide range of ES&H disciplines in order to achieve compliance with company ES&H standards and regulatory requirements.

Employee will be responsible to perform the following functions/duties: Assist in the development, implementation, and maintenance of ES&H written programs, systems, and procedures necessary to ensure the safety and health of employees and the community Perform site audits and assessment activities, direct incident investigation efforts, and recommend approaches to solutions Maintain a working knowledge of specific requirements imposed by government agencies, the Air Force, and other customer requirements Identify and evaluate environmental or safety hazards and make recommendations for corrective actions Enforce compliance of operations personnel with the established Environmental Safety and Health guidelines, policies, and related proper practices Provide technical guidance to less experienced personnel Perform other job-related duties, as required.

Requirements -- Education, Technical, and Work Experience A graduate certificate from a two-to-four-year technical institute or college, or equivalent formal technical training or military equivalent, and eight or more years of experience in a directly related technical working environment are required for this position.

In addition, an ES&H Specialist III must possess the following qualifications: Base of knowledge sufficient to oversee the performance of technically diverse tasks assigned to the section or unit Working knowledge of management techniques and interpersonal skills sufficient to interface with and effectively direct subordinates Practical knowledge of company policies, procedures, and practices sufficient to perform as an effective, informed supervisor In-depth working knowledge of the technical concepts, principles, and requirements associated with the work unit Planning/organizational skills Ability to work under deadlines.

The expected salary range for this position is $94,203 to $109,203 annually The salary range offered for this position is a good faith description of the expected salary range this role will pay.

JT4 LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.

Benefits Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50% up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.

Working Conditions Work is performed in a typical office environment.

Occasional lifting (up to 40 pounds), constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.

Employee will be required to climb towers and fly to remote locations in fixed wing aircraft and or helicopters in addition to traveling on a boat to remote locations.

The foregoing conditions and physical requirements represent the general characteristics required to perform the essential functions for this job.

In general, all positions may require standing, walking, sitting, lifting, carrying, pushing, pulling, climbing, bending, twisting, kneeling, crouching, and crawling.

Specific work assignments may include additional environmental conditions or physical requirements necessary to perform the essential functions of the job.

These specific requirements will be detailed in the job posting.

JT4 employees will only operate equipment that they have been fully trained on and/or certified to operate.

If working in a training capacity, employees must be supervised at all times by a competent trained or certified company employee.

Under no circumstances should employees use another employee's equipment without permission from their immediate supervisor or manager.

Conversely, employees should not allow other JT4 employees or employees of another employer to use JT4-owned or assigned equipment without proof of training and approval of the shop manager.

Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.

They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.

Tasking is in support of a Federal Government Contract that requires U.S.

citizenship.

Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.

SCC: JESH3; A4PMSR

JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.

Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.

JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.

JT4 will be hiring multiple candidates for this position with varying experience and skill levels.

Salary ranges will be based on skill level and education.

JOB DUTIES
- ESSENTIAL FUNCTIONS JT4 has immediate need for aircraft Propulsion Integration (PI) Test and Evaluation (T&E) engineers.

Incumbents will review and provide input to PI document reviews in support of Technical Review Board (TRB), Safety Review Board (SRB), and Report Integrated Product Teams (RIPT) meetings.

Candidates will also provide PI enterprise level coordination (ground test to flight test) for all projects.

Support the Director of Propulsion Safety and Technical Review (DoPSTR), Joint Propulsion Council meetings and special topic IPTs, assist in the coordination of input from allied engineering disciplines (avionics, armament, electronic warfare, flying qualities, performance, structures, subsystems, and signature) for PI T&E.

Candidate must possess experience in the field of military aircraft propulsion integration Test and Evaluation (T&E).

Responsibilities will include providing technical input to test planning efforts, developing and/or modifying data analysis tools, defining engine test instrumentation requirements, supporting test execution, including control room support, performing post-flight data analysis, and assisting with technical reporting.

The incumbent should have flight test experience, preferably in the T&E of a variety of single-engine and multi-engine aircraft platforms.

REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and 4 years of related engineering experience or have an accredited Master of Science in Engineering with at least 2 years of related engineering experience or have an accredited doctoral degree in engineering.

The candidate must have mastery of concepts, principles, and practices of engineering that enables the employee to serve as a technical authority on projects relating to the specific programs.

The position requires sufficient knowledge and skill to apply the latest developments in engineering to solve problems in the specialty area along with excellent communication and analytical skills.

The candidate must have a working knowledge of computer systems and computer-based engineering tools and possess planning/organizing skills.

The position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.

The candidate must possess a valid, state-issued driver's license.

The candidate must be able to obtain and maintain a DoD security clearance up to top secret with special access.

Must be a U.S.

citizen.

SALARY The expected salary range for this position is $110,000 to 185,000 annually.

Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.

JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.

BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.

WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.

Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.

Travel to remote company work locations may be required.

DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.

They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.

Tasking is in support of a Federal Government Contract that requires U.S.

citizenship.

Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.

SCC: JENG17, A1412TW

JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.

Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.

JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.

JT4 will be hiring multiple candidates for this position with varying experience and skill levels.

Salary ranges will be based on skill level and education.

JOB DUTIES
- ESSENTIAL FUNCTIONS JT4 seeks motivated and experienced Performance and Flying Qualities Engineers to support flight test operations at Edwards AFB located in California.

P&FQ ENGINEER RESPONSIBILITIES: Be part of engineering team in test strategy development in concert with program office focal points.

Provide assessments of pre-CDR test planning processes and documents.

Significant contributor of a wide variety of flight planning, execution, analysis, and reporting documents.

Junior to Senior experience of P&FQ test and evaluation engineering to include envelope expansion, air data, performance, flying qualities, and flight controls.

Provides technical consultation to other organizations or customers.

Directs interface and liaison with internal and external customers at all levels of test activities, design reviews, and technical working group meetings to comply with requirements and specifications.

Reviews completion and implementation of systems additions and/or enhancements and recommends corrections in technical application and analysis to management.

Prepares, delivers, and submits technical papers and performs data analysis.

Maintains technical project responsibility for assigned tasks and advises management of progress in support of the technical and administrative direction of project operations.

DESIRED QUALIFICATIONS Must use excellent communications skills, both verbal and written, in day-to-day project activities as well as in briefing customers and in writing reports and proposals.

Must have a working knowledge of computer systems and computer-based engineering tools.

Candidates must have, or be able to obtain, a Secret Clearance with the eventual upgrade to Top Secret clearance and must be eligible for Sensitive Compartmented Information (SCI).

REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and four years of related engineering experience or have an accredited Master of Science in Engineering with at least 2 years of related engineering experience or have an accredited doctoral degree in Engineering.

The candidate must have mastery of concepts, principles, and practices of engineering that enables the employee to serve as a technical authority on projects relating to the specific programs.

The position requires sufficient knowledge and skill to apply the latest developments in engineering to solve problems in the specialty area along with excellent communication and analytical skills.

The candidate must have a working knowledge of computer systems and computer-based engineering tools and possess planning/organizing skills.

The position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.

The candidate must possess a valid, state-issued driver's license.

The candidate must be able to obtain and maintain a DoD security clearance up to top secret with special access.

Must be a U.S.

citizen.

SALARY The expected salary range for this position is $110,000 to $185,000 annually.

Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.

JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.

BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.

WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.

Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.

Travel to remote company work locations may be required.

DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.

They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.

Tasking is in support of a Federal Government Contract that requires U.S.

citizenship.

Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.

SCC: JENG17, A1412TW

JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.

Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.

JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.

JT4 will be hiring multiple candidates for this position with varying experience and skill levels.

Salary ranges will be based on skill level and education.

JOB DUTIES
- ESSENTIAL FUNCTIONS JT4 is looking for a Navigation/ Identification Friend or Foe engineers who are experienced with flight vehicles (Manned/Unmanned), guided munitions, and UAS systems.

The successful applicants will support Developmental Test & Evaluation of Navigation and guidance, and/or support Guidance, Navigation and Control development on advanced weapon systems to meet critical needs for warfighters.

Engineers in this position are responsible for the developmental test and evaluation and analysis of guidance, navigation and autopilot algorithms, and operational flight software.

Additionally, selected candidates will validate and verify performance and supporting ground and flight tests with pre-flight predictions and post-flight analyses.

Incumbents will review and provide input to Technical Review Board (TRB), Safety Review Board (SRB), and Report Integrated Product Teams (RIPT) meetings.

Candidates will also provide coordination (ground test to flight test) for all projects and assist in the coordination of input from allied engineering disciplines (avionics, armament, electronic warfare, flying qualities, performance, structures, subsystems, and signatures).

Qualifications: GNC, Signal Processing, and/or Modeling / Simulation experience Engineering experience in system applications to include at least one of the following: Digital and/or modern control systems Signal processing Verification and validation System-level performance assessments GPS/INS navigation systems, sensors, and algorithms Assured Positioning, Navigation, and Timing (APNT) systems, sensors, and algorithms for navigation in GPS-degraded environments Experience with MATLAB, Python, C, C++, and/or Object-Oriented design Experience with GNC and/or Signal Processing algorithms within a simulation or physical environment Candidates must have, or be able to obtain, a Secret Clearance with the eventual upgrade to Top Secret clearance and must be eligible for Sensitive Compartmented Information (SCI).

REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and four years of related engineering experience or have an accredited Master of Science in Engineering with at least 2 years of related engineering experience or have an accredited doctoral degree in Engineering.

The candidate must have mastery of concepts, principles, and practices of engineering that enables the employee to serve as a technical authority on projects relating to the specific programs.

The position requires sufficient knowledge and skill to apply the latest developments in engineering to solve problems in the specialty area along with excellent communication and analytical skills.

The candidate must have a working knowledge of computer systems and computer-based engineering tools and possess planning/organizing skills.

The position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.

The candidate must possess a valid, state-issued driver's license.

The candidate must be able to obtain and maintain a DoD security clearance up to top secret with special access.

Must be a U.S.

citizen.

SALARY The expected salary range for this position is $110,000 to $185,000 annually.

Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.

JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.

BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.

WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.

Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.

Travel to remote company work locations may be required.

DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.

They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.

Tasking is in support of a Federal Government Contract that requires U.S.

citizenship.

Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.

SCC: JENG17, A1412TW

JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.

Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.

JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.

JT4 will be hiring multiple candidates for this position with varying experience and skill levels.

Salary ranges will be based on skill level and education.

JOB DUTIES
- ESSENTIAL FUNCTIONS JT4 is hiring employee's entry to senior level Autonomy Engineers.

As an Autonomy Engineer, you will contribute directly to the Developmental Integration & Evaluation, and deployment of 6th Generation aircraft.

Develop test plans and procedures for the integration, characterization, and testing of complex test Navigation, Defense Aviation Systems, Intelligence, Surveillance, and Reconnaissance platforms, Command & Control, Automation, Flight Controls, Guidance Navigation & Control, and Inertial Navigation Systems, Global Navigation Satellite System Integration, and Navigation Error Modeling.

Execute tests, collect and analyze test data to optimize performance, and support system design enhancements.

Perform system performance modeling to demonstrate performance compliance in support of the development, characterization, and testing of new deliverable test systems.

Work with engineering staff to document changes made to hardware and deviations from standard procedures as necessary.

Preferred qualifications: Experience in Flight Test Engineering.

Experience building digital models and simulations Unmanned Aerial Systems.

Experience validating and verifying navigation systems in operational test environments.

Candidates must have, or be able to obtain, a Secret Clearance with the eventual upgrade to Top Secret clearance and must be eligible for Sensitive Compartmented Information (SCI).

REQUIRMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and four years of related engineering experience or have an accredited Master of Science in Engineering with at least 2 years of related engineering experience or have an accredited doctoral degree in engineering.

The candidate must have mastery of concepts, principles, and practices of engineering that enables the employee to serve as a technical authority on projects relating to the specific programs.

The position requires sufficient knowledge and skill to apply the latest developments in engineering to solve problems in the specialty area along with excellent communication and analytical skills.

The candidate must have a working knowledge of computer systems and computer-based engineering tools and possess planning/organizing skills.

The position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.

The candidate must possess a valid, state-issued driver's license.

The candidate must be able to obtain and maintain a DoD security clearance up to top secret with special access.

Must be a U.S.

citizen.

SALARY The expected salary range for this position is $110,000 to $185,000 annually.

Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.

JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.

BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.

WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.

Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.

Travel to remote company work locations may be required.

DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.

They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.

Tasking is in support of a Federal Government Contract that requires U.S.

citizenship.

Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.

SCC: JENG17, A1412TW

JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.

Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.

JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.

JT4 will be hiring multiple candidates for this position with varying experience and skill levels.

Salary ranges will be based on skill level and education.

JOB DUTIES
- ESSENTIAL FUNCTIONS JT4 is hiring junior to mid-level Human Systems Integration engineers.

Candidates will perform a variety of engineering tasks in the field of aerospace human systems integration (HSI) in design, development, manufacturing, testing, installation, integration, sustainment, operations, and maintenance of electronic, and/or mechanical equipment and systems.

Work will involve evaluation, originality, or ingenuity and is generally performed as a member of a development, sustainment, or operations & maintenance team.

The candidate will conduct research and reference reading to assist higher-level engineers in obtaining human factors technical information; keep informed of currently approved standards, codes and procedures applied to human factors engineering specialty.

Perform engineering tasks that are varied, with established deadlines, and may be somewhat difficult in character with emphasis on the importance of human engineering and the impact of human performance on the flight test vehicle.

Interface with teams across the project to provide human factors expertise and analysis.

Plan and carry out successive human factors engineering stops and resolves technical problems by standard practices and techniques such as tolerance studies and design calculations.

Prepares, delivers, and submits technical papers and performs engineering studies.

Interacts with aircrew to develop and conduct human factors surveys and use computer-assisted test methods, conduct laboratory investigations on equipment or system.

Assists in preparation of reports, correspondence, or technical studies.

Studies currently approved standards, codes, and procedures applied to the HSI engineering specialty.

Prepares, delivers, and submits technical presentations for in-process design and review meetings.

Performs all other position-related duties as assigned or requested.

DESIRED QUALIFICATION A Bachelor's Degree in Human Systems Engineering.

REQUIRMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and four years of related engineering experience or have an accredited Master of Science in Engineering with at least 2 years of related engineering experience or have an accredited doctoral degree in engineering.

The candidate must have mastery of concepts, principles, and practices of engineering that enables the employee to serve as a technical authority on projects relating to the specific programs.

The position requires sufficient knowledge and skill to apply the latest developments in engineering to solve problems in the specialty area along with excellent communication and analytical skills.

The candidate must have a working knowledge of computer systems and computer-based engineering tools and possess planning/organizing skills.

The position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.

The candidate must possess a valid, state-issued driver's license.

The candidate must be able to obtain and maintain a DoD security clearance up to top secret with special access.

Must be a U.S.

citizen.

SALARY The expected salary range for this position is $110,000 to $185,000 annually.

Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.

JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.

BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.

WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.

Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.

Travel to remote company work locations may be required.

DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.

They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.

Tasking is in support of a Federal Government Contract that requires U.S.

citizenship.

Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.

SCC: JENG17, A1412TW