Jm Eagle Pipe Jobs in Usa

As the HVAC technician, you will you will perform maintenance on HVAC systems to ensure proper functioning and efficiency, such as filter replacement, troubleshooting and replacing fan motors, and more while performing routine jobs. Responsibilities include repairing commercial 5-40 ton and residential ton HVAC systems and assisting with replacement work 1-40 ton, refrigerant piping, drain piping, wiring of systems, and charging of systems. Read and interpret prints. In this role, you must be able to complete assigned work orders, use the work order system to document problems, meet schedules and timelines, and work with the team to support the university's overall needs. Additionally, you must be able to contact your supervisor when emergencies exist, or assistance is needed, be on call to handle emergency situations, and follow all SCAD and OSHA policies and procedures.

The ideal candidate should demonstrate an ability to understand the principles of air distribution, refrigeration cycle and correct problems, an understanding of components and what function they serve, and electrical components and control systems.

Minimum Qualifications:

• High school diploma or GED required with a technical school degree in appropriate area
• Basic knowledge of electricity
• Knowledge of controls systems
• Able to pass the DOT medical exam*

*If an applicant fails the DOT physical based upon a claimed disability under the ADA, and notifies the university of such, the university will participate in the interactive process with the applicant to determine whether there is a reasonable accommodation pursuant to which the applicant can perform the essential functions of the position.

Preferred Qualifications:

• 4–5 years of HVAC experience in construction, maintenance, or service
• Commercial refrigeration and ice machine knowledge

Certificates, licenses, and registrations:

• Valid driver's
• Valid refrigerant card
• Ability to be insured by college insurance company to drive a vehicle

Travel required:

• Less than 10%

Work Hours: The university work week is Sunday through Saturday. Most offices are open Monday through Friday from 8:30 a.m. to 5:30 p.m. To accommodate business needs, employees may be assigned to other workdays and/or hours, including weekends and evenings.

ADA Tag: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements and minimum qualifications listed represent the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions and/or meet the minimum qualifications.

At ISCO, we put high value on appreciation and respect, and provide you with an opportunity to really make a difference. ISCO is a family owned and operated company born and raised in Louisville, KY. ISCO offers a standard benefits package of medical/dental/vision, and a 401k! ISCO Industries is an end-to-end piping solutions provider that specializes in HDPE, working with leading edge technology that makes us a market leader. Nervous about knowing nothing about pipe? We will teach you what you need to know!

Job Duties

• Lead strategic initiatives for identifying, recruiting and hiring diverse talent in a multi-site, international company
• Manage full cycle recruiting process for all job types within the Company, with heavy emphasis on recruiting and hiring non-exempt skilled workforce
• Build applicant sources by researching and partnering with community services, colleges, employment agencies, recruiters, media, and internet sites and Employee Referral Program
• Conduct pipeline review meetings with respective hiring managers and Human Resource team
• Challenge and improve the New Hire Orientation process
• Track and report key metrics designed to measure and predict staffing activity
• Maintain compliance with all federal, state and local regulations throughout the talent recruitment process
• Attend regional career fairs
• Perform special projects and drive overall process improvements within the HR department

Job Requirements

• 1-5 years experience in recruiting or HR coordinator role in a corporate environment with a strong understanding and ability to recruit in all levels of the organization from entry level to Corporate staff is strongly preferred. Experience recruiting individuals to fill Industrial roles is strongly desired. Previous internship experience working in an HR department will also be considered
• 2 year degree from an accredited college or university, 4 year degree preferred
• Excellent inter-personal skills, communication skills and team based project experience
• Clear understanding of the end to end recruitment life cycle processes
• Prefer that candidate has experience running advertisements and sourcing resumes from a variety of sources including referrals, college campuses, web advertising, social media, and print
• Strong vendor management skills related to recruitment activities such as search firms and job boards
• Proficient computer skills including the Microsoft Office Suite and in depth knowledge of data mining and internet research as well as previous experience using an Applicant Tracking and HRIS system
• This candidate will be working in the Corporate Office in Louisville, KY

Maintenance Manager - Up to $80K annually DOE!

This position is a direct hire opportunity!

Integrity Trade Services is hiring a Maintenance Manager for our manufacturing client to start immediately up to $80K annually DOE! Receive comprehensive benefits through our client upon hire!

Responsibilities:

The Maintenance Manager oversees and performs maintenance operations for a liquid bulk terminal. This role involves directing personnel, contractors, and resources to complete preventive and corrective maintenance tasks on tanks, meters, pumps, valves, piping systems, gear reducers, filters, strainers, vehicles, cranes, forklifts, and other equipment essential to terminal operations.

The Maintenance Manager also coordinates the insulation and painting of tanks, piping, handrails, and structural supports; manages the cleaning of tanks; and ensures proper upkeep of maintenance facilities, equipment, and grounds. Additionally, this position participates in spill response, hazardous and non-hazardous material handling, tank cleaning, and other safety- and environmental-related activities.

The Maintenance Manager directly supervises up to six employees and is responsible for training, planning, assigning, and reviewing work, evaluating performance, and resolving issues in accordance with company policies and applicable regulations.

• Report maintenance activities, projects, and concerns to management.
• Promote and adhere to all safety, environmental, and regulatory standards.
• Manage multiple maintenance tasks efficiently.
• Implement and enforce maintenance operating procedures.
• Monitor environmental, health, and safety performance within the maintenance team.
• Support the achievement of corporate Quality Management and Food Safety objectives.
• Maintain compliance with ISO Quality and Food Safety Management Systems.
• Ensure product safety for food-grade operations.
• Schedule, supervise, and evaluate maintenance personnel and workloads.
• Develop maintenance operating procedures as needed.
• Train staff, maintain training documentation, and coordinate recordkeeping with safety personnel.
• Assist in resolving customer concerns related to maintenance activities.
• Prepare corrective action reports as necessary.
• Maintain high housekeeping standards in maintenance buildings and terminal grounds.
• Verify that terminal equipment and assets are inspected and serviced per preventive maintenance schedules, manufacturer requirements, and company procedures.
• Oversee on-site contractors and obtain project quotes from vendors.
• Prepare and submit cost estimates for maintenance and capital projects.
• Manage inspection, repair, and maintenance of mechanical equipment, steam systems, nitrogen systems, mixers, compressors, and valves.
• Oversee vehicle and heavy equipment maintenance (e.g., pay loaders, bobcats, cranes, man-lifts).
• Schedule terminal painting and general infrastructure upkeep.
• Operate heavy equipment such as forklifts, loaders, torches, and lifts for maintenance tasks.
• Inspect and maintain tank foundations, steam coils, vents, relief valves, and gaskets.
• Prepare and manage the annual maintenance budget.
• Maintain tools and ensure proper use and secure storage.

Location: Hammond, IN

Schedule/Shift Details: Day shift

Qualifications:

• Associate degree or technical school diploma in a related field; or
• One to two years of related maintenance or supervisory experience; or
• Equivalent combination of education and hands-on experience.

Benefits:

• Medical
• Dental
• Vision
• PTO
• 401k

Why choose Integrity Trade Services?

At ITS, we offer our employees a competitive salary paid weekly and a comprehensive benefits package, including medical, dental, and vision insurance.

Interested? Want to Learn More?

Reach out to Melissa Bauza at or call/text 7 !

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

Job Description: Fire Sprinkler Foreman

Location Openings: Diboll, TX, Shreveport, LA, New Iberia, LA, and Dallas, TX

Join Our Team: Your Expertise, Our Family Environment

Join a team that genuinely values skilled tradespeople. We are committed to your professional growth and foster a supportive, family-oriented work culture. We are seeking a motivated, experienced Fire Sprinkler Foreman who takes pride in their craftsmanship, thrives on solving complex problems, and is ready to lead the way on critical safety projects.

The Role: Fire Sprinkler Foreman

As a working Foreman, you are the crucial on-site leader. You will ensure that fire suppression systems are installed, maintained, and repaired to the highest safety and quality standards, specifically adhering to all NFPA requirements.

You will manage daily job site operations, directly supervise a small crew (2–4 people), and serve as the primary professional point of contact for our valued customers and general contractors.

Key Responsibilities (“What You’ll Do”)

• Lead & Supervise: Manage and direct a 2-4 person crew on commercial and industrial job sites, ensuring peak efficiency, strict safety compliance (OSHA 10/30), and uncompromising quality control.
• Expert Installation & Service: Perform expert installation, troubleshooting, maintenance, and repair of various fire sprinkler systems.
• Technical Execution: Execute core physical tasks including precise cutting, threading, and grooving of pipe, professional pipe hanging, and cutting all-thread rod.
• Blueprint Interpretation: Accurately read and interpret blueprints, schematics, and project specifications to guide efficient and compliant installations.
• Client Communication: Serve as the professional face of the company, communicating courteously and effectively with clients, general contractors, and inspectors.
• Documentation & Reporting: Ensure accurate completion and timely submission of all project paperwork, service documentation, and daily job reports.
• Safety & Organization: Uphold a clean, safe, and organized work environment while ensuring proper maintenance of all company equipment and tool

Required Qualifications (“What We’re Looking For”)

We are looking for a reliable, experienced leader who meets these essential requirements:

• Experience: A minimum of 5 years of proven experience as a fire sprinkler foreman or equivalent supervisory role within the fire protection or plumbing trades.
• Education: High School Diploma or equivalent.
• Licensing & Certifications: Valid state driver’s license with a clean driving record.
• Compliance: Ability to pass a mandatory background check and drug screening prior to employment.
• Physical Ability: Must be able to lift up to 50 lbs, work comfortably and safely at heights (ladders/lifts), and stand for extended periods in various weather conditions.
• NFPA Standards: Strong working knowledge of NFPA Standards (NFPA 13, 20, 25).

Compensation & Benefits (“What We Offer”)

We believe in rewarding hard work, expertise, and commitment.

• Highly Competitive Wages: Pay is based directly on your experience, skill level, and relevant certifications.
• Health & Wellness: Comprehensive Medical and Dental Insurance plans.
• Financial Future: 401(k) retirement plan with a generous company match.
• Time Off: Paid Time Off (PTO) and company holidays.
• Work-Life Balance Note: This role requires some flexibility to accommodate occasional after-hours service calls and limited overnight travel (project-dependent).

Commitment to Professional Growth (“How we support your development”)

We support and encourage ongoing training and certifications to further your career, including:

• NICET Level Certifications
• Inspector Licensing
• OSHA 10 or OSHA 30 Certification
• Continuing education of NFPA Standards (NFPA 13, 20, 25)

Junior to Mid-Level Corporate Associate

About the Company: Sichenzia Ross Ference Carmel LLP is seeking a Junior to Mid-Level Corporate Associate with 1-5 years of experience in the field of securities and corporate law. This is an excellent opportunity for skilled candidates looking to work in a nationally recognized securities practice located in midtown NYC. The firm supports a hybrid working environment.

About the Role: Sichenzia Ross Ference Carmel LLP offers a comprehensive compensation and benefits package including a bonus and potential % of origination on new business.

Responsibilities:

• Knowledge with registered securities offerings, PIPEs, SEC regulations, ’33 Act Registration Statements, and ’34 Act periodic filings, mergers & acquisitions, general corporate law and SEC research
• A minimum of 1 year of experience with regulatory requirements and compliance issues
• Self-motivated and proactive approach to managing client relationships: must be invested in our clients and deeply committed to obtaining the best possible outcome for them
• Excellent interpersonal communication skills and exemplary attention to detail
• 1+ years of substantive legal experience working for high-growth, early-stage businesses and active investors in connection with incorporations, equity financings, securities, mergers and acquisitions, and general corporate counseling

Qualifications:

• NYS Bar Certificate

Required Skills:

• Knowledge with registered securities offerings, PIPEs, SEC regulations, ’33 Act Registration Statements, and ’34 Act periodic filings, mergers & acquisitions, general corporate law and SEC research
• A minimum of 1 year of experience with regulatory requirements and compliance issues
• Self-motivated and proactive approach to managing client relationships: must be invested in our clients and deeply committed to obtaining the best possible outcome for them
• Excellent interpersonal communication skills and exemplary attention to detail
• 1+ years of substantive legal experience working for high-growth, early-stage businesses and active investors in connection with incorporations, equity financings, securities, mergers and acquisitions, and general corporate counseling

Pay range and compensation package: Salary Range: Low: $150,000 – High: $245,000

Equal Opportunity Statement: The firm is committed to diversity and inclusivity.

Position Title: Structural Department Manager

Reports To: Production Manager

Position Summary:

The Structural Department Manager is responsible for leading and managing the daily operations of the Structural, Pipe, and Labor Departments in support of ship repair, maintenance, and modernization projects. This role ensures all work is performed safely, efficiently, within budget, and to the highest quality standards in accordance with applicable specifications and regulatory requirements.

The Structural Department Manager is responsible for setting the tone and culture of the department, ensuring full alignment with company expectations and strategic objectives. This role requires proactive leadership, accountability, and a strong commitment to organizational priorities. Department Managers are expected to champion company initiatives and directives from senior leadership, clearly communicating and reinforcing them within their teams as unified, department-level guidance.

The manager oversees a broad scope of production activities, including structural steel fabrication and repairs, hull modifications, deck and bulkhead work, piping system installation and testing, and general labor support services. Responsibilities include coordinating structural welders, fitters, pipefitters, laborers, and support crews to meet production goals and project schedules.

This position requires strong knowledge of shipboard structures, welding and pipefitting techniques, material handling, and staging. The Structural Department Manager works closely with project teams, planning, and other production departments to integrate efforts across trades, resolve technical and logistical challenges, and ensure customer satisfaction. The manager is also responsible for workforce development, resource planning, and ensuring compliance with all safety, environmental, and quality management protocols.

Pacific Shipyards Expectations of Employee:

• Support safety as a core value.
• Support “schedule” as the organization’s keystone habit.
• Committed to the company values and adheres to all Pacific Shipyards’ policies and procedures.
• Maintain a positive and respectful attitude and conduct her/himself with integrity and in a polite, professional manner treating customers and co-workers courteously and respectfully.
• Foster a department culture of accountability and organization by setting clear expectations to maintain clean, orderly work areas in alignment with 5S standards.
• Maintain and ensure the safety of all assigned equipment.
• Perform all duties in conformance to appropriate safety and security standards.
• Develop and measure department productivity goals and quality standards daily, weekly, and on a project basis.
• Ability to read and understand drawings and specifications.
• Ability to handle multiple tasks and balance priorities.
• Computer proficiency in Microsoft Office.
• Provide clear & consistent communication about project schedules, execution strategies, department budgets, and process improvement initiatives.
• Leads by example and demands a positive and respectful attitude and requiring all Production Department employees to conduct themselves with integrity and in a polite, professional manner treating customers and co-workers courteously and respectfully.
• Develop & meet productivity goals and quality standards to ensure PSI maintains a competitive edge in the Hawaii Ship Repair Industry.

Essential Duties & Responsibilities:

• Ensure Structural Department Staff are constantly working to streamline production processes, reduce rework, improve department reliability, and deliver early on key schedule milestones.
• Provide systems for accountability for the management of department resources, including labor, materials, and equipment, to ensure efficient financial performance.
• Maintain open communication with VP Programs, Production Manager, Production Engineering & Planning Manager, and PMO staff to address operational bottlenecks and correct them quickly.
• Ensure that every member of the Structural Department has clear & measurable tasks daily and provide a system for Department Management to provide daily feedback to all employees.
• Establish, enhance and maintain standard processes for the measuring and monitoring of department production rates, and providing standard rate information and feedback to Estimating.
• Ensure that all materials are ordered to support department schedules.
• Grows and develops Structural Department capabilities to increase business opportunities, eliminate dependence on subcontractors, and ensure PSI maintains a competitive advantage in the dynamic ship repair landscape.
• Create systems for collecting and reporting Structural Department Performance metrics across the organization.
• Strive for continuous improvement and encourage feedback from employees to drive improvements based on past projects to enhance performance.
• Embrace new technologies by introducing modern, efficient tools and technologies to improve productivity. Encourage employees to suggest and implement innovative solutions that can enhance efficiency and quality
• Works closely with the Project Manager(s) to ensure timely and cost-efficient completion of projects and/or jobs.
• Generates job assignments and communicates to subordinate employees, makes recommendations to the Production Manager on matters related to hiring, termination, suspension, advancement, promotion, demotion, discipline, and addresses or adjust employee grievances and other supervisory duties as required.
• Determines workforce staffing to maximize efficiency and meet project/department budget goals.
• Leads, trains, and develops Assistant Superintendents, Foremen, Lead men, and production team members.
• Advises PM on the status of all assigned projects, potential obstacles and delays and plans to minimize impact and beat project goals.
• Handle various administrative duties such as report writing, performance reviews, responding to email, interviews candidates, and form completion.
• Estimates time, manpower, and materials required for assigned jobs.
• Complies with requirements of the CBA.
• Assesses team member skills and provide necessary training opportunities as required to enhance or address deficiencies.
• Plan, coordinate, and supervise the execution of structural, pipefitting, and labor-related work in support of ship repair and maintenance projects, ensuring alignment with project schedules, budgets, and technical specifications.
• Ensure all work is performed in compliance with applicable NAVSEA Standard Items, U.S. Navy technical requirements, and other regulatory and contract specifications.
• Oversee hot work operations, ensuring proper permitting, fire watch assignments, and strict adherence to safety procedures related to welding, burning, and grinding activities aboard vessels and in yard facilities.
• Lead coordination efforts between departments, subcontractors, and project management teams to resolve production and technical issues that may impact critical path work.
• Monitor and enforce compliance with company policies, OSHA regulations, and customer-specific safety and environmental requirements, including confined space entry, fall protection, and hazard communication standards.

Other Duties

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Education/Training and Experience:

• High School Diploma or equivalent work experience is required.
• Ability to read and interpret blueprints and sketches.
• Experience with US Navy Ship repair/NAVSEA regulation is preferred.
• Associates degree in Industrial Trades/Applied Science is preferred.
• Proficient with Word and Excel.
• Minimum of 10 years of experience in shipyard heavy industry is required.
• Extensive knowledge of ship repair processes.
• Knowledge of managing Federal Contracts.
• Ability to organize and prioritize to meet deadlines.
• Excellent communication skills, both verbal and written.
• Interpersonal skills, good attitude, and exceptional work ethic.
• Work requires establishing priorities and meeting deadlines.

Qualifications/Requirements:

• Strong technical background.
• Ability to write effectively and the ability to accurately communicate with all PSI employees.
• Ability to access, interpret, and apply government and industry standards, law, and corporate policy and procedures to aid in the management of the Mechanical Department.
• Ability to organize and prioritize to meet deadlines.
• Proficiency with spreadsheet and word processing software
• Ability to effectively operate standard office equipment
• Good attitude; must be a team player.
• Candidates must have access to reliable transportation to get to work and other job sites on time for the start of shift
• Must be flexible in work hours
• Valid State of Hawaii REAL ID-Compliant Drivers’ License in good standing, Class 3 or higher or a valid U.S. Passport in addition to a valid Hawaii Driver’s License, if you do not have a REAL ID-Compliant Driver’s License.

Work Authorization/Security Clearance:

• Must show proof of your legal right to work in the United States
• This position requires US Citizenship due to security clearance required for base access
• Must be able to successfully obtain a Transportation Worker Identification Credential (TWIC)
• Must be able to successfully obtain a Defense Biometric Identification System (DBIDS) Credential to gain access to federally controlled work sites

Brock11 is partnering with a leading, full-service construction and facility solutions provider headquartered in Northwest Ohio to identify a Mechanical Preconstruction Leader for its North Ridgeville operations.

This well-established organization has been delivering comprehensive construction, design-build, energy, and facility maintenance solutions since the mid-1950s. Operating through a unified team of specialized companies, they serve as a single-source partner for clients across commercial and industrial markets—supporting projects from site selection and financing through construction, renovation, and long-term facility management.

Position Overview

The Mechanical Preconstruction Leader is responsible for leading all mechanical estimating and planning activities during the preconstruction phase of commercial and industrial projects. This role ensures accurate budgeting, thorough constructability reviews, and strategic value engineering across process piping, HVAC, plumbing, and related mechanical systems.

The ideal candidate is both technically strong and collaborative, with the ability to guide preconstruction efforts that result in cost-effective, high-quality project outcomes.

Key Responsibilities

• Develop detailed mechanical estimates and budgets for commercial and industrial projects.
• Review mechanical drawings and specifications to ensure accuracy and constructability.
• Collaborate with design teams, owners, and trade partners to optimize scope, cost, and schedule.
• Lead value engineering initiatives to identify cost-saving opportunities without compromising quality.
• Conduct risk assessments and contribute to procurement strategies.
• Maintain preconstruction schedules and ensure timely delivery of mechanical estimates.
• Build and maintain strong relationships with clients, partners, and internal stakeholders.

Qualifications & Skills

• Strong knowledge of process piping, HVAC, plumbing, and mechanical systems.
• Experience with BIM and virtual design tools.
• Familiarity with sustainable building practices and LEED certification.
• Design-build or integrated project delivery experience preferred.
• Proficiency in estimating software and Microsoft Office Suite.
• Experience with Accubid estimating software is a plus.
• Excellent communication, leadership, and collaboration skills.

Education & Experience

• Bachelor’s degree in Mechanical Engineering, Construction Management, or related field preferred.
• 5+ years of experience in mechanical estimating or preconstruction.

This is an excellent opportunity to join a respected, growth-oriented organization known for delivering integrated construction and facility solutions with a strong commitment to quality, innovation, and long-term client partnerships.

Like working outdoors? Want an entry level position with FULL BENEFITS that could lead to a career in test drilling?

Ardamam & Associates, Inc. is one of the largest geotechnical, materials testing, and environmental engineering consulting firms in the Southeastern U.S. Ardaman has the following opportunity available:

DRILLER ASSISTANT

Our Tampa office has an opportunity available for a Driller's Assistant. A driller assistant will assist the crew chief in solid stem and hollow stem auger drilling techniques. The assistant will help move, set up and operate drilling rigs and related equipment to drill holes for geotechnical exploration test borings. Site investigation/geotechnical drilling is done to determine the soil characteristics on construction sites. Work is outdoors. The work is generally physically demanding. However, safety is Ardaman's priority and we are proud of our safety record.

• Assist in drilling operations.
• Expedite field supplies.
• Perform duties at multiple job sites.
• Perform yard duties at direction of supervisor.
• Assist in measuring test boring locations
• Load and unload trucks.
• Smoothly and quickly connect and disconnect the lower parts of the drill pipe when it is being lowered into and raised from the hole.
• Catch samples of drilled cuttings to be analyzed.
• Clean and maintain equipment.
• Help move drilling rig and equipment from site to site and set up.
• Dig and clean mud pits and drains.
• Assist with well development and pumping tests.
• Operate equipment such as pumps for air, water and mud, and equipment and tools used to correct problems in drilled holes caused by mechanical breakdowns or by harmful natural conditions.
• Carry out minor maintenance and repairs, including lubrication and cleaning.
• Perform other duties as assigned.

• Experience preferred, but will train
• Mechanical skills preferred
• Must have current DOT Medical Examiners Certificate or be able to obtain one prior to employment
• Class A or Class B CDL license a plus
• Available to work overtime, out of town, and weekends as required to meet client schedules

• Ability to lift drill pipe and materials weighing up to 80 lbs.
• Must pass company background checks including drug screen
• Must have an excellent driving record within company standards
• Local candidates preferred; no relocation.

We offer a comprehensive benefits program including medical, dental, vision, life insurance, paid time off, 401(k) with company match, and much more.

We are proud to be an Equal Opportunity Employer. All qualified candidates will be considered without regard to race, color, religion, national origin, age, disability, sex, marital or familial status, status as a protected veteran, or any other characteristic protected by law. Ardaman is a Drug Free Workplace.

Responsibilities:

• Follow company safety policies Demonstrate proper use of personal protective equipment

Know and follow the HAZCOM program

• Present a positive image to customers, co-workers, and others on the job

• Keep work area clean

• Be willing to learn and take direction

• Attend training to improve knowledge of HVAC

• Possess general knowledge of hand tools and their use

• Be able to identify material for piping, copper, and PVC fittings

• Understand proper handling procedures for chilled water piping systems

• Understand general electrical safety practices

Qualifications:

• High School Diploma or Equivalent

Work Environment:

• Physical activities of standing, balancing, climbing stairs and ladders. Must be comfortable working from heights (over 20 feet is common). Walking and lifting weight of twenty (20) pounds or more are required in the daily performance of job.

• Use of upper extremities required for forward and overhead reaching, pushing, pulling and material handling.

• Use of torso and lower extremities required for kneeling, crawling, stooping, twisting and squatting.

• 
  
• Set up and operate machine tools including but not limited to the following:
  
• Milling Machines & Machining Centers (manual and CNC controlled)
  
• Engine & Slant Bed Lathes (manual and CNC controlled)
  
• Surface Grinder
  
• Drill Presses
  
• Tool & Cutter Grinders
  
• Cut-off Saw/ Band Saw/ Abrasive Saw
  
• Use all applicable hand tools including: Micrometers (inside/outside), calipers, height gages, depth gages, etc.
  
• Machine prototype components from 3-D model files supplied from Engineering Design.
  
• Using creativity and self-direction in designing, machining, and testing of prototypes and fixtures when standard methods do not apply.
  
• Machine components or prototypes to supplied Engineering blueprints within specified tolerance requirements.
  
• Provide innovative input, as appropriate, to Engineering staff to help meet overall program goals.
  
• Determine all necessary equipment and operating parameters necessary to achieve completion of assignments including; end mills, inserts, drills, reamers, fixturing, cutting speeds, surface finishes, etc.
  
• Design and construct fixtures for aiding in the machining process as necessary.
  
• Perform bench work with hand tools as necessary.
  
• Perform maintenance on machine tools, equipment, and work area to maintain a proper work environment.
  
• Ability to work from written or verbal instructions.
  
• Participate in the Quality Improvement Program through the use of QWG's, MATS's, CATS, and utilization of QIP problem solving techniques.
  
• Perform Technical Lab functions as necessary (hydro testing, inspection, pattern approvals, etc.).
  
• Specific policies and procedures have been established by the Engineering Department to provide for the security and accessibility of electronic data and confidential information. It is the responsibility of the employee, in the daily course of doing business, to follow said policies as they relate to document management (see EOG-26). The extent to which departmental research and development information is stored electronically has vastly increased, and will continue to do so. The new Federal rules pertaining to electronic discovery stipulate that substantive email communications constituted \"records\" under the Federal Records Act. It is therefore the responsibility of each departmental employee to understand their role in communicating via e-mails and that all e-mails must be written/responded to in a professional manner
  
• Follow ALL safety procedures and guidelines.
  

• 
  
• High school graduate.
  
• Proficient in blueprint reading, assembly drawings, shop math, geometry, and use of precision measuring instruments.
  
• Proficient in bench work including: drilling, tapping, filing, assembly, and inspection of components for form, fit, and function.
  
• Minimum of eight years of machine shop or related experience.
  
• Ability to set up, operate, and maintain all Lab machine tools in a proper and safe operating manner.
  
• The ability to operate or adapt to the use of CNC controlled machine tools including programming, set-up, and proper operating parameters required to safely operate this equipment.
  
• MasterCam experience preferred but not necessary.