Jets Comics Jobs in Usa

The City of Clemson provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Under regular supervision, performs a variety of skilled maintenance work, and operates a variety of trucks and equipment in the operation, repair, maintenance, and replacement of City utility facilities and systems.

* Drives truck, Jet Vac truck, dump truck, service truck with excavator trailer, or truck equipped with a hydraulic lifting device to transport the load to disposal area.
* Performs manual labor for water and sewer line installations and repairs, manhole maintenance, fire hydrant maintenance, water and sewer taps, and installation of water and sewer pipes with appurtenances.
* Operates tractor with mowing, bush hog, and other similar type attachments.
* Receives written work orders or verbal instructions from the Equipment Operator or Utilities Foreman.
* Replaces worn or damaged parts, such as hoses, wiring, and belts, in machines and equipment, such as truck, backhoe/loader, dump truck, trencher, and other equipment.
* Hand washes vehicles.
* Assembles tools, equipment, and materials; performs specific work tasks on the city's water and sewer system as instructed.
* Provides on-call duty coverage during non-working hours as per duty roster, approximately 6-7 times per year.
* Operates light and medium-sized construction and power equipment.
* Performs all duties in conformance to appropriate safety and security standards.
* Performs required labor involved in construction and maintenance projects as part of a crew, including ditch digging, manhole and line cleaning, main and pipe repair, and backfilling.
* Is required to fill in other positions in the department.
* Reports unsafe conditions or defects in equipment.
* Must be able to discern possible threats to public health safety for water and sewer problems, repairs, and installations.
* Must be able to use good construction/installation techniques/processes for water and sewer line installations and repairs.
* Reports all accidents and incidents (including near misses) as soon as they occur.
* Works according to good safety practices as posted, instructed, and/or discussed.
* Follows safety rules and regulations and uses personal protective equipment.
* Refrains from any unsafe behavior or act that might endanger self or fellow worker(s).
* Participates in safety training, makes suggestions as necessary; serves on committees or inspection teams when appropriate.
* Wears seatbelt while driving to and from job sites.
* Operates a variety of machinery, motorized vehicles, and equipment, including dump truck, pickup truck, utility truck, jetter/inductor truck, man lift, generators, mobile radio, ditch witch, etc.
* Uses a variety of tools and supplies including saws, pumps, compressors, sanders, common hand and power tools, shovels, wrenches, detection devices, etc.

High school diploma or equivalent supplemented by one (1) year of experience relating to utility construction, maintenance, or repair; or an equivalent combination of education, training, and experience that provides the required knowledge, skills, and abilities.

Must possess a valid state driver's license. Must have a valid South Carolina driver's license and commercial driver's license certification with tanker and airbrake endorsements, or the ability to obtain one. Must have a minimum Class "C" SC Voluntary Wastewater Collection License. Must possess an Asbestos III Workers license from SC LLR. The employee is required to abide by all City of Clemson, State, and Federal Safety Laws.

Applications accepted online at Applications accepted until March 13, 2026. The City of Clemson provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

The City of Clemson is an equal opportunity employer.

JACQUET is an established market leader in the distribution of stainless steel and nickel alloys in plate and round bar. Jacquet strives to be the best supplier of stainless steel and nickel cut parts by providing high quality in-house processing. Metals are sold either as-is or cut to made-to-measure sizes using plasma machines, water jets, lasers or saws. Jacquet applications cover many industrial sectors such as the water, environment, energy, mechanical and forged metal construction, chemical and agri-food, gas processing and storage, pharmaceutical and cosmetic sectors. We have four strategically placed locations within the US including Pennsylvania, California, Texas, and Wisconsin with many more globally.

We are currently seeking an experienced Saw Operator (bar/plate) at our Limerick, PA facility. We offer training, competitive pay, and a comprehensive benefits package. If you have the necessary skills and qualifications, we would enjoy the opportunity to speak with you!

Description:

The saw operator is responsible for the safe operation, maintenance, and cutting of stainless steel and nickel alloys per customer specifications.

Responsibilities:

• Take primary responsibility for operation and maintenance of the bar saw machine to include Production, Quality, accuracy of Production Logs, and BT/Travelers/Programs.
• Perform daily, weekly, and monthly maintenance as needed.
• Assist maintenance whenever requested or directed.
• Monitor your machines consumables. Cut and remove scrap. Report any deficiencies.
• Use plates, bars, rems, and programs as specified by Production Control. Prior approval for any changes.
• Work with QA department on all matters of quality to include quality of cut parts, cutting tolerances, quality statistics and ISO 9000 certification.
• Ensure that safe work practices are maintained always within your work section and always adhere to safety requirements and wear required protective equipment.
• Control the neat, orderly and accurate storage of all bar inventory in the plant.
• Organize the work area of your machines. All tools should be put away in an orderly manner.
• Maintain and constantly improve upon the cleanliness of your section.
• Perform other reasonable tasks as requested by the Operations Manager or the floor supervisor.

Requirements:

• Minimum 18 years
• High School Diploma or Equivalent
• Ability to read and write English
• Ability to stand, sit, bend, stoop, and reach
• Ability to lift 50 lbs.

Other Skills:

• Attention to detail
• Team player
• Basic familiarity with computers/software programs

Experience:

• 1+ years prior experience operating a plate or bar saw
• 1+ year(s) prior experience operating an overhead crane
• 1+ year(s) prior experience operating a forklift

Minimum Additional Training:

• Experience in math and statistics

Pay Range: $20 - $24 per hour depending upon experience

Compensation details: 20-24 Hourly Wage

PIfdb933f32776-26289-39824530

This off-shift position is located within our Plant 10 Whitehall Casting Operation and will direct and motivate the manufacturing work force to produce products of high quality in the most efficient and safe manner and ensure that scheduling meets business and customer needs.

Responsibilities

• Supervises an effective team; includes planning and holding meetings, preparing and conducting performance appraisals as appropriate, managing staffing levels (including vacations, overtime, and leaves of absences), assisting with career development (motivates, coaches, and trains to acquire maximum quality, productivity, morale, and cooperation), approving time and attendance, and prioritizing and making work assignments.
• Provides effective feedback to employees, both positive and negative. Maintains appropriate documentation for all disciplinary actions taken.
• Provides training and mentoring to new Supervisors.
• Directs training and orientation of employees to ensure EHS rules are known and understood, to improve work performance, and acquaint employees with company policies and procedures.
• Maintains compliance with the collective bargaining agreement. Interfaces between management and union officials. Handles grievances.
• Ensures compliance with company policies, procedures, and practices.
• Schedules production and work teams.
• Reviews production and operating reports and resolves operations, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays.
• Promotes EHS and continuous improvement initiatives and culture.
• Implements ABS principles and initiatives and is the 6S program leader.
• Interacts with their employees and other departments in order to manage the flow of product through the operation.
• Maintains inventories, as applicable.
• Creates a total awareness among assigned employees of Company policies, regulations, procedures, and business initiatives. Enforces compliance and acts as a positive resource for information and questions.
• Responds to emergencies. Assists in troubleshooting production problems. Investigates and analyzes. Initiates or recommends actions to correct deviations and variables affecting schedules, costs, quality, and other factors.
• Prepares and analyzes documentation as required (i.e. production reports, log sheets, etc).
• Reviews work procedures for safety regulations and concerns.
• Plans, develops, and implements new methods and procedures designed to improve operations, minimize operating costs, and effect greater utilization of labor and materials.
• Confers with management, engineering, and quality control personnel to resolve maintenance problems and recommend measures to improve operations and conditions of machines and equipment.
• Performs audits for safety compliance; facilitates the 6S audit program.
• Assists with budget and goal setting of the operation.
• Complies with all EHS rules required for the work environment.
• Performs other duties, as assigned.

Job Roles

• Anticipation--asks questions to understand needs of multiple stakeholder groups; prepares operation for optimal execution; contributes as a strategic partner to planning process
• Reliability--leads by example; provides goal and measurement information to others; facilitates safe environment; works effectively within parameters of bargaining unit contract
• Optimizer--improves processes; executes production for maximal output; eliminates waste; increases quality; aligns activity and resources to desired outcomes; sets others up for success
• Facilitator--interacts with internal and external stakeholders at multiple levels; furnishes accurate instructions to others; acts as liaison between planning, management and execution elements of the business
• Responsiveness--deals effectively with the unforeseen; modifies labor schedule or other variables as needed based on circumstances
• Influence-- delegates effectively; capable of explaining the why behind a recommendation or directive; advocates for the business; maintains approachability; deals with conflict and change effectively
• Organization and structure--plans daily; coordinates to deliver on time; ensures efficiencies while balancing priorities of multiple projects and stakeholder groups; has contingency plans
• Observation--sees and hears through the lens of performance; enables accuracy in scheduling, quality in production and relationship with customers; makes recommendations and changes based on patterns and data; monitors for feedback and communicates findings; sees physical and personnel issues and acts on observations; has a finger on the pulse of what occurs within the plant
• Ownership--accepts accountability for the performance of others and the business; inspires ownership and improvement in others; invites measurement

Basic Qualifications:

• High School Diploma or GED from an accredited institution
• Minimum of 3 years leadership experience
• Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.

Preferred Qualifications

• Experience supervising in a manufacturing environment
• Experience with TPM, Synchronous Mfg., and Kaizen Concepts
• Must be able to communicate effectively with all levels of the organization, have good team building skills, excellent people skills; ability to handle multiple tasks, technically oriented
• Must be energetic and a self-starter, able to promote and implement change, have good PC skills, good telephone skills, strong organizational skills, and ability to promote a continuous improvement atmosphere

Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts.

Valued at $1.6B, we're accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts.

Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond.

As a CAM Programmer, you will have direct responsibility for producing CAM packages and CNC Programs for highly complex, close-tolerance components. You will play a critical role within the company, sitting at the intersection of manufacturing and software R&D. This role is instrumental in developing and testing the technologies that will move the manufacturing industry forward and truly shape the future of manufacturing.

Responsibilities include generating precise CNC programs that align with our programming standards, directly contributing to the success of your teammates within CAM Operations by producing highly reliable, well-executed CAM files and efficient programs at a rapid pace.

The ideal candidate will possess an analytical mindset, viewing challenges as opportunities for improvement and innovation. They will systematically address and solve these challenges while contributing to Hadrian's knowledge base, covering tooling, application processes, workholding design, and manufacturing methodologies. Additionally, they should enrich our culture through proactive communication, teamwork, and carry themselves with the utmost integrity.

CAM Program and Component Process Deployment:

• Generate CAM files with detailed manufacturing intent, strictly adhering to Hadrian's design principles
• Craft clear, comprehensive work instruction documents suitable for all skill levels, specifically designed to empower individuals with minimal experience in machine tool setups to achieve success.

Internal Product Development:

• Be flexible working with ever-changing technology
• Improve internal automation software by providing feedback, identifying application process gaps, trends, and problems.
• Report factory bugs and general workflow issues as you encounter them, placing the utmost importance on promptly communicating issues or challenges that arise daily. No matter how small they are perceived to be.

CAM Process Optimization through Internal Feedback Integration:

• Actively seek out and incorporate feedback from team members and technical staff to boost productivity and refine machining programs and overall CAM process procedures.
• Create repeatable output across the production of hundreds of units, utilizing partner teams' feedback in the pursuit of continuous improvement opportunities.
• Rigorously identify gaps and communicate these findings to CAM Process Designers for integration or revision

Fixture Design and CAD Modeling:

• Design and model 3D fixtures conforming to Hadrian's fixture design standards with the Siemens NX CAD platform. Embrace advanced fixture design processes (e.g., 3-2-1 locating, Poka-Yoke error-proofing, equation-driven design) for creating efficient and robust fixtures.
• Adhere to industry-standard CAD design-tree practices and follow internally developed workflows

Software Proficiency:

• Operate efficiently within the hyperMILL and NX environments, utilizing best practices while fully leveraging Hadrian's automation suite for effective design and program creation.
• Maximize the use of Hadrian's Co-Pilot CAM integration throughout the CAM Programming process, fully leveraging it on a daily basis.
• Effectively utilize a variety of communication tools such as email, messaging applications, Microsoft Office suite, etc.

• Proven experience in programming 3 and/or 5-axis CNC machine tools within a production environment of high-tolerance precision components.
• Prior involvement in the aerospace sector or similar industries with stringent requirements.
• Knowledge of safety procedures, quality standards, and tool selection is essential.
• Average understanding of Geometric Dimensioning and Tolerances (GD&T).
• Capability to interpret data (such as CMM reports), identify trends, or tools needed to gather understanding of dimensional instability, and apply insights to enhance the manufacturing process.
• Demonstrated ability and willingness to try new things, adopt new approaches to the industry, and have the vision and discipline necessary to push through development scenarios within an operational setting.
• Demonstrated commitment to integrity while facing difficult production challenges and debugging issues. Valuing action and team-centric solutions over anything else.

• Advanced Materials: Steels, Stainless, Titanium, Inconel
• 5-Axis Proficiency and Mill-turn experience is a plus
• Proficiency in integrating probing routines within CNC programming
• Skills in manufacturing data analysis and software aiding this analysis are used to identify patterns, trends, and inefficiencies in the manufacturing process.
• Being a forever student of the trade. Maintaining awareness and understanding of current trends, technologies, and foundational practices such as Industry 4.0, IoT, Artificial Intelligence applications within manufacturing, and lean principles. Adaptability to evolving technologies and processes is fundamental to Hadrian's mission.

For this role, the target salary range is $110,000 - $165,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs.

• Medical, dental, vision, and life insurance plans for employees
• 401k
• Relocation support may be provided for certain situations, based on business need.
• Flexible vacation policy

ITAR Requirements

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.

Hadrian Is An Equal Opportunity Employer

It is the Company's policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

• Responsible for supporting the construction of several products concurrently.
  

• Able to operate multiple machinery; (Bridge Port, Grinders, Saws, EDM).
• Comply with Corporate EHS, Quality and HR rules and standards.
  

• High school diploma or GED

• 
  
• Experience/Knowledge of machining a variety of metals.
  
• Knowledge of speeds, feeds, step downs and cutting tools.
  
• Ability to use and read handheld measuring tools.
  

This off-shift position is located within our Plant 10 Whitehall Casting Operation and will direct and motivate the manufacturing work force to produce products of high quality in the most efficient and safe manner and ensure that scheduling meets business and customer needs.

Responsibilities

• Supervises an effective team; includes planning and holding meetings, preparing and conducting performance appraisals as appropriate, managing staffing levels (including vacations, overtime, and leaves of absences), assisting with career development (motivates, coaches, and trains to acquire maximum quality, productivity, morale, and cooperation), approving time and attendance, and prioritizing and making work assignments.
• Provides effective feedback to employees, both positive and negative. Maintains appropriate documentation for all disciplinary actions taken.
• Provides training and mentoring to new Supervisors.
• Directs training and orientation of employees to ensure EHS rules are known and understood, to improve work performance, and acquaint employees with company policies and procedures.
• Maintains compliance with the collective bargaining agreement. Interfaces between management and union officials. Handles grievances.
• Ensures compliance with company policies, procedures, and practices.
• Schedules production and work teams.
• Reviews production and operating reports and resolves operations, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays.
• Promotes EHS and continuous improvement initiatives and culture.
• Implements ABS principles and initiatives and is the 6S program leader.
• Interacts with their employees and other departments in order to manage the flow of product through the operation.
• Maintains inventories, as applicable.
• Creates a total awareness among assigned employees of Company policies, regulations, procedures, and business initiatives. Enforces compliance and acts as a positive resource for information and questions.
• Responds to emergencies. Assists in troubleshooting production problems. Investigates and analyzes. Initiates or recommends actions to correct deviations and variables affecting schedules, costs, quality, and other factors.
• Prepares and analyzes documentation as required (i.e. production reports, log sheets, etc).
• Reviews work procedures for safety regulations and concerns.
• Plans, develops, and implements new methods and procedures designed to improve operations, minimize operating costs, and effect greater utilization of labor and materials.
• Confers with management, engineering, and quality control personnel to resolve maintenance problems and recommend measures to improve operations and conditions of machines and equipment.
• Performs audits for safety compliance; facilitates the 6S audit program.
• Assists with budget and goal setting of the operation.
• Complies with all EHS rules required for the work environment.
• Performs other duties, as assigned.

Job Roles

• Anticipation--asks questions to understand needs of multiple stakeholder groups; prepares operation for optimal execution; contributes as a strategic partner to planning process
• Reliability--leads by example; provides goal and measurement information to others; facilitates safe environment; works effectively within parameters of bargaining unit contract
• Optimizer--improves processes; executes production for maximal output; eliminates waste; increases quality; aligns activity and resources to desired outcomes; sets others up for success
• Facilitator--interacts with internal and external stakeholders at multiple levels; furnishes accurate instructions to others; acts as liaison between planning, management and execution elements of the business
• Responsiveness--deals effectively with the unforeseen; modifies labor schedule or other variables as needed based on circumstances
• Influence-- delegates effectively; capable of explaining the why behind a recommendation or directive; advocates for the business; maintains approachability; deals with conflict and change effectively
• Organization and structure--plans daily; coordinates to deliver on time; ensures efficiencies while balancing priorities of multiple projects and stakeholder groups; has contingency plans
• Observation--sees and hears through the lens of performance; enables accuracy in scheduling, quality in production and relationship with customers; makes recommendations and changes based on patterns and data; monitors for feedback and communicates findings; sees physical and personnel issues and acts on observations; has a finger on the pulse of what occurs within the plant
• Ownership--accepts accountability for the performance of others and the business; inspires ownership and improvement in others; invites measurement

Basic Qualifications:

• High School Diploma or GED from an accredited institution
• Minimum of 3 years leadership experience
• Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.

Preferred Qualifications

• Experience supervising in a manufacturing environment
• Experience with TPM, Synchronous Mfg., and Kaizen Concepts
• Must be able to communicate effectively with all levels of the organization, have good team building skills, excellent people skills; ability to handle multiple tasks, technically oriented
• Must be energetic and a self-starter, able to promote and implement change, have good PC skills, good telephone skills, strong organizational skills, and ability to promote a continuous improvement atmosphere

• 
  
• Level I: $15.83 - $24.65
  
• Level II: $16.49 - $28.60
  
• 1st Shift Hours: 6:00am-2:30pm
  
• All members included in annual cash bonus opportunity
  
  • 
    
  • 401(k) match (4.5%)
    
  • Annual Woodward stock contribution (5%)
    
  
  
  
• Tuition reimbursement and Training/Professional Development opportunities for all members
  
• 12 paid holidays, including floating holidays
  
• Industry leading medical, dental, and vision Insurance upon date of hire
  
• Vacation / Sick Time / Vacation Buy-up / Short Term Disability / Bereavement leave
  
• Adoption Assistance
  
• Employee Assistance Program, including mental health benefits
  
• Member Life & AD&D / Long Term Disability / Member Optional Life
  
• Member referral bonus
  
• Spouse / Child Optional Life / Optional AD&D / Healthcare and Dependent Care Flexible Spending
  
• Voluntary benefits, including:
  
  • 
    
  • Home / Auto Insurance discounts
    
  • Whole Life Insurance / Critical Illness Insurance / Legal Assistance / Military Leave
    
  
  
  

• 
  
• Assemble and/or perform preset calibration/final testing. Performs low to moderately complex assembly and test. Products may include but are not limited to small products, light subassemblies, and/or complete units of a smaller size.
  
• Assemble, install, align, adjust and fit subassemblies and parts or auxiliary equipment using appropriate tools and equipment as per work instructions.
  
• Clean parts and maintain tooling and equipment per proper work instructions.
  
• Follow work instructions associated with assembly skills to become certified for work being performed.
  
• Work with close tolerances and fits to meet engineering and operating requirements.
  
• Complete all required paperwork in an accurate and efficient manner, including Quality Assurance and Test Record.
  

• 
  
• High school diploma or equivalent required
  
• Mechanical aptitude required
  
• Ability to use a variety of basic hand tools
  
• Basic written/verbal communication skills
  
• Basic computer skills
  
• Willingness to demonstrate eagerness, enthusiasm, and optimism for work activities
  
• Detail orientation and ability to follow work instructions
  

• 
  
• High school diploma or equivalent required
  
• 2-5 years of related experience required
  
• Mechanical aptitude required
  
• Ability to use a variety of basic hand tools
  
• Basic written/verbal communication skills
  
• Basic computer skills
  
• Willingness to demonstrate eagerness, enthusiasm, and optimism for work activities
  
• Detail orientation and ability to follow work instructions
  

This off-shift position is located within our Plant 10 Whitehall Casting Operation and will direct and motivate the manufacturing work force to produce products of high quality in the most efficient and safe manner and ensure that scheduling meets business and customer needs.

Responsibilities

• Supervises an effective team; includes planning and holding meetings, preparing and conducting performance appraisals as appropriate, managing staffing levels (including vacations, overtime, and leaves of absences), assisting with career development (motivates, coaches, and trains to acquire maximum quality, productivity, morale, and cooperation), approving time and attendance, and prioritizing and making work assignments.
• Provides effective feedback to employees, both positive and negative. Maintains appropriate documentation for all disciplinary actions taken.
• Provides training and mentoring to new Supervisors.
• Directs training and orientation of employees to ensure EHS rules are known and understood, to improve work performance, and acquaint employees with company policies and procedures.
• Maintains compliance with the collective bargaining agreement. Interfaces between management and union officials. Handles grievances.
• Ensures compliance with company policies, procedures, and practices.
• Schedules production and work teams.
• Reviews production and operating reports and resolves operations, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays.
• Promotes EHS and continuous improvement initiatives and culture.
• Implements ABS principles and initiatives and is the 6S program leader.
• Interacts with their employees and other departments in order to manage the flow of product through the operation.
• Maintains inventories, as applicable.
• Creates a total awareness among assigned employees of Company policies, regulations, procedures, and business initiatives. Enforces compliance and acts as a positive resource for information and questions.
• Responds to emergencies. Assists in troubleshooting production problems. Investigates and analyzes. Initiates or recommends actions to correct deviations and variables affecting schedules, costs, quality, and other factors.
• Prepares and analyzes documentation as required (i.e. production reports, log sheets, etc).
• Reviews work procedures for safety regulations and concerns.
• Plans, develops, and implements new methods and procedures designed to improve operations, minimize operating costs, and effect greater utilization of labor and materials.
• Confers with management, engineering, and quality control personnel to resolve maintenance problems and recommend measures to improve operations and conditions of machines and equipment.
• Performs audits for safety compliance; facilitates the 6S audit program.
• Assists with budget and goal setting of the operation.
• Complies with all EHS rules required for the work environment.
• Performs other duties, as assigned.

Job Roles

• Anticipation--asks questions to understand needs of multiple stakeholder groups; prepares operation for optimal execution; contributes as a strategic partner to planning process
• Reliability--leads by example; provides goal and measurement information to others; facilitates safe environment; works effectively within parameters of bargaining unit contract
• Optimizer--improves processes; executes production for maximal output; eliminates waste; increases quality; aligns activity and resources to desired outcomes; sets others up for success
• Facilitator--interacts with internal and external stakeholders at multiple levels; furnishes accurate instructions to others; acts as liaison between planning, management and execution elements of the business
• Responsiveness--deals effectively with the unforeseen; modifies labor schedule or other variables as needed based on circumstances
• Influence-- delegates effectively; capable of explaining the why behind a recommendation or directive; advocates for the business; maintains approachability; deals with conflict and change effectively
• Organization and structure--plans daily; coordinates to deliver on time; ensures efficiencies while balancing priorities of multiple projects and stakeholder groups; has contingency plans
• Observation--sees and hears through the lens of performance; enables accuracy in scheduling, quality in production and relationship with customers; makes recommendations and changes based on patterns and data; monitors for feedback and communicates findings; sees physical and personnel issues and acts on observations; has a finger on the pulse of what occurs within the plant
• Ownership--accepts accountability for the performance of others and the business; inspires ownership and improvement in others; invites measurement

Basic Qualifications:

• High School Diploma or GED from an accredited institution
• Minimum of 3 years leadership experience
• Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.

Preferred Qualifications

• Experience supervising in a manufacturing environment
• Experience with TPM, Synchronous Mfg., and Kaizen Concepts
• Must be able to communicate effectively with all levels of the organization, have good team building skills, excellent people skills; ability to handle multiple tasks, technically oriented
• Must be energetic and a self-starter, able to promote and implement change, have good PC skills, good telephone skills, strong organizational skills, and ability to promote a continuous improvement atmosphere

This off-shift position is located within our Plant 10 Whitehall Casting Operation and will direct and motivate the manufacturing work force to produce products of high quality in the most efficient and safe manner and ensure that scheduling meets business and customer needs.

Responsibilities

• Supervises an effective team; includes planning and holding meetings, preparing and conducting performance appraisals as appropriate, managing staffing levels (including vacations, overtime, and leaves of absences), assisting with career development (motivates, coaches, and trains to acquire maximum quality, productivity, morale, and cooperation), approving time and attendance, and prioritizing and making work assignments.
• Provides effective feedback to employees, both positive and negative. Maintains appropriate documentation for all disciplinary actions taken.
• Provides training and mentoring to new Supervisors.
• Directs training and orientation of employees to ensure EHS rules are known and understood, to improve work performance, and acquaint employees with company policies and procedures.
• Maintains compliance with the collective bargaining agreement. Interfaces between management and union officials. Handles grievances.
• Ensures compliance with company policies, procedures, and practices.
• Schedules production and work teams.
• Reviews production and operating reports and resolves operations, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays.
• Promotes EHS and continuous improvement initiatives and culture.
• Implements ABS principles and initiatives and is the 6S program leader.
• Interacts with their employees and other departments in order to manage the flow of product through the operation.
• Maintains inventories, as applicable.
• Creates a total awareness among assigned employees of Company policies, regulations, procedures, and business initiatives. Enforces compliance and acts as a positive resource for information and questions.
• Responds to emergencies. Assists in troubleshooting production problems. Investigates and analyzes. Initiates or recommends actions to correct deviations and variables affecting schedules, costs, quality, and other factors.
• Prepares and analyzes documentation as required (i.e. production reports, log sheets, etc).
• Reviews work procedures for safety regulations and concerns.
• Plans, develops, and implements new methods and procedures designed to improve operations, minimize operating costs, and effect greater utilization of labor and materials.
• Confers with management, engineering, and quality control personnel to resolve maintenance problems and recommend measures to improve operations and conditions of machines and equipment.
• Performs audits for safety compliance; facilitates the 6S audit program.
• Assists with budget and goal setting of the operation.
• Complies with all EHS rules required for the work environment.
• Performs other duties, as assigned.

Job Roles

• Anticipation--asks questions to understand needs of multiple stakeholder groups; prepares operation for optimal execution; contributes as a strategic partner to planning process
• Reliability--leads by example; provides goal and measurement information to others; facilitates safe environment; works effectively within parameters of bargaining unit contract
• Optimizer--improves processes; executes production for maximal output; eliminates waste; increases quality; aligns activity and resources to desired outcomes; sets others up for success
• Facilitator--interacts with internal and external stakeholders at multiple levels; furnishes accurate instructions to others; acts as liaison between planning, management and execution elements of the business
• Responsiveness--deals effectively with the unforeseen; modifies labor schedule or other variables as needed based on circumstances
• Influence-- delegates effectively; capable of explaining the why behind a recommendation or directive; advocates for the business; maintains approachability; deals with conflict and change effectively
• Organization and structure--plans daily; coordinates to deliver on time; ensures efficiencies while balancing priorities of multiple projects and stakeholder groups; has contingency plans
• Observation--sees and hears through the lens of performance; enables accuracy in scheduling, quality in production and relationship with customers; makes recommendations and changes based on patterns and data; monitors for feedback and communicates findings; sees physical and personnel issues and acts on observations; has a finger on the pulse of what occurs within the plant
• Ownership--accepts accountability for the performance of others and the business; inspires ownership and improvement in others; invites measurement

Basic Qualifications:

• High School Diploma or GED from an accredited institution
• Minimum of 3 years leadership experience
• Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.

Preferred Qualifications

• Experience supervising in a manufacturing environment
• Experience with TPM, Synchronous Mfg., and Kaizen Concepts
• Must be able to communicate effectively with all levels of the organization, have good team building skills, excellent people skills; ability to handle multiple tasks, technically oriented
• Must be energetic and a self-starter, able to promote and implement change, have good PC skills, good telephone skills, strong organizational skills, and ability to promote a continuous improvement atmosphere

This off-shift position is located within our Plant 10 Whitehall Casting Operation and will direct and motivate the manufacturing work force to produce products of high quality in the most efficient and safe manner and ensure that scheduling meets business and customer needs.

Responsibilities

• Supervises an effective team; includes planning and holding meetings, preparing and conducting performance appraisals as appropriate, managing staffing levels (including vacations, overtime, and leaves of absences), assisting with career development (motivates, coaches, and trains to acquire maximum quality, productivity, morale, and cooperation), approving time and attendance, and prioritizing and making work assignments.
• Provides effective feedback to employees, both positive and negative. Maintains appropriate documentation for all disciplinary actions taken.
• Provides training and mentoring to new Supervisors.
• Directs training and orientation of employees to ensure EHS rules are known and understood, to improve work performance, and acquaint employees with company policies and procedures.
• Maintains compliance with the collective bargaining agreement. Interfaces between management and union officials. Handles grievances.
• Ensures compliance with company policies, procedures, and practices.
• Schedules production and work teams.
• Reviews production and operating reports and resolves operations, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays.
• Promotes EHS and continuous improvement initiatives and culture.
• Implements ABS principles and initiatives and is the 6S program leader.
• Interacts with their employees and other departments in order to manage the flow of product through the operation.
• Maintains inventories, as applicable.
• Creates a total awareness among assigned employees of Company policies, regulations, procedures, and business initiatives. Enforces compliance and acts as a positive resource for information and questions.
• Responds to emergencies. Assists in troubleshooting production problems. Investigates and analyzes. Initiates or recommends actions to correct deviations and variables affecting schedules, costs, quality, and other factors.
• Prepares and analyzes documentation as required (i.e. production reports, log sheets, etc).
• Reviews work procedures for safety regulations and concerns.
• Plans, develops, and implements new methods and procedures designed to improve operations, minimize operating costs, and effect greater utilization of labor and materials.
• Confers with management, engineering, and quality control personnel to resolve maintenance problems and recommend measures to improve operations and conditions of machines and equipment.
• Performs audits for safety compliance; facilitates the 6S audit program.
• Assists with budget and goal setting of the operation.
• Complies with all EHS rules required for the work environment.
• Performs other duties, as assigned.

Job Roles

• Anticipation--asks questions to understand needs of multiple stakeholder groups; prepares operation for optimal execution; contributes as a strategic partner to planning process
• Reliability--leads by example; provides goal and measurement information to others; facilitates safe environment; works effectively within parameters of bargaining unit contract
• Optimizer--improves processes; executes production for maximal output; eliminates waste; increases quality; aligns activity and resources to desired outcomes; sets others up for success
• Facilitator--interacts with internal and external stakeholders at multiple levels; furnishes accurate instructions to others; acts as liaison between planning, management and execution elements of the business
• Responsiveness--deals effectively with the unforeseen; modifies labor schedule or other variables as needed based on circumstances
• Influence-- delegates effectively; capable of explaining the why behind a recommendation or directive; advocates for the business; maintains approachability; deals with conflict and change effectively
• Organization and structure--plans daily; coordinates to deliver on time; ensures efficiencies while balancing priorities of multiple projects and stakeholder groups; has contingency plans
• Observation--sees and hears through the lens of performance; enables accuracy in scheduling, quality in production and relationship with customers; makes recommendations and changes based on patterns and data; monitors for feedback and communicates findings; sees physical and personnel issues and acts on observations; has a finger on the pulse of what occurs within the plant
• Ownership--accepts accountability for the performance of others and the business; inspires ownership and improvement in others; invites measurement

Basic Qualifications:

• High School Diploma or GED from an accredited institution
• Minimum of 3 years leadership experience
• Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.

Preferred Qualifications

• Experience supervising in a manufacturing environment
• Experience with TPM, Synchronous Mfg., and Kaizen Concepts
• Must be able to communicate effectively with all levels of the organization, have good team building skills, excellent people skills; ability to handle multiple tasks, technically oriented
• Must be energetic and a self-starter, able to promote and implement change, have good PC skills, good telephone skills, strong organizational skills, and ability to promote a continuous improvement atmosphere