Iris Software Inc Noida Jobs in Usa

Job Summary:

• The Lead Service Management Specialist provides expert guidance and hands-on support for our organization's IT service management. This senior-level position is crucial for ensuring the stability and integrity of our production environment through the effective application of industry best practices and our internal processes. In this role, you will apply the ITSM model, ITIL, and COBIT process frameworks to lead the day-to-day operations of our change and release management team.
• You'll serve as a mentor and coach, working closely with technical build and run engineers to coordinate the installation and updating of production infrastructure, systems, and application components. Your leadership will be key to championing adherence to our Change, Release and Problem Management processes and driving continuous improvement.

Summary Of Essential Duties & Responsibilities:

• Provide expert guidance and oversight for our Change Management Framework, leading Go-Live initiatives and Change Advisory Board (CAB) meetings.
• Lead the coordination and deployment of all software and hardware releases, ensuring they are executed smoothly and with minimal impact.
• Act as the primary subject matter expert for Change and Release processes. You'll coach and mentor technical teams, ensuring all changes are processed and documented in full compliance with corporate policies.
• Serve as a key liaison for the Service Desk and Operations Center, coordinating activities and follow-ups for changes that lead to service outages. You'll also participate in Root Cause Analysis (RCA) to prevent future issues.
• Proactively identify opportunities to improve process and tool efficiencies. You will champion initiatives to enhance inter-process dependencies and optimize workflows.
• Develop and maintain high-quality process and procedure documents that support development and production operations, ensuring consistency and adherence to standards.
• Perform other duties and/or special projects as assigned
• This role is approximately 80% remote and up to 20% on-site.
• The selected candidate must be able to come into the office to perform required work within 48 hours

Job Title: Digital Merchandising 3 - Global Football Merchandising Manager

Location: Beaverton, OR 97005 (Hybrid)

Duration: 6 Months (High Possibility of Extension)

WHO WE ARE LOOKING FOR

For Client Inc. merchants, everything begins and ends with the consumer! The Merchandising team understands consumer needs and market opportunities to craft a significant product mix for each marketplace. We blend art with science to bring Client’s vision to life in all retail environments, leading with our Members and Client Direct digital and physical spaces and expanding to our retail partners. The team has the unrivaled ability to see beyond trends and identify new market opportunities, delivering the right product, at the right price, in the right place, at the right time.

WHAT YOU WILL WORK ON

As a Merchandising Manager on the APLA Global Football Merchandising team, you'll utilize marketplace data, consumer insights, foresight, and hindsight to make decisions, influence and develop seasonal plans to serve our consumer. You'll provide qualitative and quantitative insights to the Consumer Merchandising teams, the counterparts on Global Merchandising teams across Sports and gender constructs. You’ll lead the management of our merchandising KPIs through robust analysis of retail insights and performance. You'll build positive and trustworthy relationships with your partners (including Client Direct Merchants, Marketing, Consumer Planning, and Territory Merchants, among others) to build and land assortments that meet the needs of consumers, take them to a new place, and differentiate the key points of distribution across key cities. You’ll work with your cross-functional team to maintain the optimal balance between a pull and push market.

This role is located in Beaverton, Oregon but works within the Asia Pacific and Latin America geography, whose main goal is to represent and serve the voice of the consumers who inhabit six major markets in this region (Japan, Korea, Southeast Asia and India, Australia & New Zealand, Mexico, and Central and South America).

WHO YOU WILL WORK WITH

You will work closely with fellow merchants and cross-functional teams within Global and Geo Merchandising; Planning, Allocation, and Brand Marketing. We also work with finance, operations and the insights/analytics teams; relying on business reporting for your area which includes quantitative and qualitative metrics on sales, inventory and consumer behaviors.

WHAT YOU BRING

• Bachelor’s degree in a related field or equivalent combination of education and experience
• 5+ years experience in merchandising, product creation, and or retail, in a vertical or wholesale environment
• Footwear, apparel and/or equipment merchandising experience
• Understanding of retail key performance indicators and profit based metrics
• Strong strategy building skills that shape the future of the business
• Effective communicator that collaborates and brings people together
• Provides direction and mentorship to teammates
• Values differences and builds strong relationships with high cultural awareness
• Proven balance of art and science in decision-making
• Self-directed, independent, and dedicated
• Cultivates innovation while also ensuring accountability
• Communicates vision and purpose and able to lead effectively in complex situations
• Solves problems using limited information and implements solutions with the ability to foresee most future implications
• Advises others on complex matters requiring in-depth knowledge or conceptual thinking
• Responds with speed and agility, curiosity, and motivation

Do you want to be part of a team that builds for America’s military and civilian servants? Does building critical infrastructure that supports and protects our country and its citizens excite you? Consider joining our team! David Boland, Inc., a general contractor located on the Space Coast of Florida, has over 50 years of proven success specializing in the construction of Federal Government projects nationwide. Our team pursues diverse opportunities from aviation and aerospace to manufacturing, healthcare, and education, in the $10M to $75M range, all in support of our country.

We are recruiting for an IT Administrator to join our team in our Titusville, Florida office.

Educational and Experience Requirements:

• Associate’s degree in IT, MIS, or CS required, Bachelor’s degree preferred.
• Proven experience in implementation and troubleshooting data networks including physical layer infrastructure, servers, LAN/WAN hardware, software, data transmission facilities, and interconnecting devices.
• Experience with network security, including Meraki Firewall configuration and data encryption.
• Experience with setup and configuration of mobile and VOIP desktop phone systems.
• Experience with hardware repairs to computer systems including upgrading and replacement of failed components in desktop and server systems.
• Ability to conduct network project assessments from start-to-finish, including creating and maintaining detailed plans, scope of work, and other technical documentation of all moves, adds, and changes.
• Ability to provide detailed support to users both in office and remote project site.
• Ability to effectively solicit pricing and perform cost versus benefit analysis of hardware and software solutions.
• Ability to maintain current and accurate inventory of IT equipment and software.
• Ability to evaluate existing communications systems; identify deficiencies, and make network performance recommendations.
• Ability to interpret and apply Government specific security protocols, including NIST 800-171.
• Excellent written and verbal communications skills.
• Ability to work in a team environment.
• Must have limited availability some evenings and weekends to provide support or perform system maintenance.

Technical Requirements:

Familiarity and knowledge of:

• Veeam backup and recovery
• VMware vSphere
• Microsoft Windows Servers 2012 and 2019
• Microsoft Exchange 2019
• Microsoft Office
• Microsoft DFS replication
• Terminal Servers
• VOIP
• CISCO Meraki
• Local Hosted File Sharing Software

Essential Functions:

• Ensures the cost effective maintenance and implementation of the company’s informational technology systems.
• Provides support to users.
• Ensures the stability of systems.
• Preserves assets by implementing disaster recovery and back-up procedures and information security and control structures.
• Maintains a current understanding and knowledge of the available computer hardware and software, and makes sound recommendations to management for the procurement and upgrading of systems.

Excellent performance is rewarded with competitive salaries, a generous incentive compensation program, a comprehensive benefits package, including 401(k) with match, medical, dental, short-term disability, and life insurance, as well as professional development opportunities.

HOW TO APPLY: Qualified candidates should send a resume to:

David Boland, Inc. is a Drug Free Workplace/Equal Opportunity Employer and ensures that all employment decisions are made on a non-discriminatory basis, and without regard to sex, race, color, age, national origin, religion, disability, genetic information, marital status, sexual orientation, gender identity/reassignment, citizenship, pregnancy or maternity, veteran status, or any other status protected by applicable national, federal, state or local law.

VEVRAA Federal Contractor/Participates in E-Verify.

Nothing in this job posting or description should be construed as an offer or guarantee of employment

About Us:

AZAZIE stands as the leading direct-to-consumer (DTC) e-tailer, providing an array of bridal gowns, bridesmaid dresses, evening wear, and accessories. Designed in Los Angeles, AZAZIE disrupts the traditional wedding industry by presenting made-to-order gowns at an affordable price point. The brand is dedicated to promoting body-positive fashion, ensuring that all dresses, available in sizes 0-30, are meticulously cut and sewn to order. Explore our website, where you'll find hundreds of bridal and bridesmaid gowns and dresses, spanning over 80+ enticing color options.

Job Summary:

Azazie is looking for a self motivated and driven Customer Service Representative to join our growing team! In this role you will be responsible for providing a positive and efficient customer experience by educating customers on product knowledge, policies and services. We are seeking out top talent candidates that are highly engaged with our customers by productively providing the solutions in response to questions, concerns, and complaints through our chat, phone and email channels.

*Please note:

We are only recruiting local candidates at this time to accommodate an in person schedule. The employee will come into San Jose location 4 times a week.

Schedule:

• Monday - Friday, 7:30AM- 4:30PM

Responsibilities:

• Proactively monitor and de-escalate situations involving unhappy customers by clarifying the information, communicating best next steps and providing solutions within 24-48 hours.
• Responding efficiently and accurately to customers through showing Azazie cares, listening to their concerns and ensuring they have a memorable experience shopping with us.
• Navigate knowledge based platforms within: AI Intercom, Company Website, Content Management System, ERP and Happy Returns.
• Strong attention to detail with ensuring accuracy in information provided and in recording customer details in order to maintain customer satisfaction and resolve issues effectively.
• Competency and initiative to meet and exceed the department metrics and individual performance goals.
• Implementation of utilizing software, databases, and tools appropriately to provide exceptional customer service within our DTC industry.

Skills/Talents you have:

• Analytical, problem solver and critical thinker.
• Ability to manage multiple channels of communication, tickets and customer conversations leading with Azazie cares and empathy.
• Team player that is willing to take initiative to support customers, other agents and supervisors.
• Adaptability to thrive in a fast-paced ever changing work environment.
• Aptitude in maintaining comprehensive knowledge of the AZ CS policies, procedures and SOPs for our customers.
• Positive attitude with a desire to learn and share ideas in a collaborative work environment.
• Clear and concise communicator within customer interactions and across different departments.
• Ability to build positive and long term customer relationships that reflect in positive customer satisfaction survey results.
• Excellent time management skills.
• Customer-focused with strong interpersonal and tech savvy skills.

Qualifications:

• Customer Service Experience: 1 year (Preferred)
• Fluency in English. Additional languages a bonus, but not required (please note if you have skills in Spanish, Mandarin, or French in your application)
• Experience with AI Intercom, Slack or other CRM software is a plus.
• Experience navigating websites/browsers and using chat software (ex./ Slack); quickly navigating. between chat and other company tools such as our CRM and phone software.
• Excellent written and oral communication skills.
• Proficient in Microsoft Office (Word, Excel, Outlook, and PowerPoint) as well as Google Docs.
• Customer-focused and can demonstrate mastery of customer service skills.
• Ability to maneuver between multiple tasks.

Benefits:

• 100% Medical, Dental, Vision, Life insurance offered after a 60-day probationary period
• Paid vacation days and sick leave
• Paid Holidays + Floating Holidays
• 401k
• Free snacks and drinks in office
• Employee discount
• Company engagement events
• Monthly departmental CS appreciation lunches

Physical Requirements: While performing the functions of this job, the employee is regularly required to sit; frequently required to talk or hear; and occasionally required to stand, walk, use hands to finger, handle, or feel, reach with hands and arms, stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close, distance and color vision.

Azazie, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements. Azazie, Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Hi,

I Hope all is well with you. This is Bharath from Grove Technical Resources. Currently we are hiring for a Software Project Engineer with in the medical Devices.

Please go through the JD and let me know if you are interested.

Job Title: Sr Software Engineer/ Technical SW Project Manager – Medical Device

Job Location: Minneapolis, Minnesota (Fully onsite)

Type: W2 contract

Job Start Date - 5/4/26

Job End Date - 12/31/26

Job Description:

The Pelvic Health R&D team is one of the most cutting edge groups, Defining and executing on technology and architectural strategy using skills that span a variety of domains including Mobile Apps (Android), cloud, data analytics, web services, 2d/3d visualization, machine learning, and interfacing with embedded software for management and control of interconnected medical devices.

As a Senior Software Engineer (Project Engineer – Mobile), you will lead execution for a defined mobile software release pipeline, working with motivated, diverse, and knowledgeable development teams. You will collaborate with Product Engineering, Development, and Test Leads to translate requirements into actionable plans, create structured backlogs, and drive high-quality delivery. This role requires a mix of technical expertise, project execution, and leadership to deliver reliable, impactful mobile software that improves the quality of life of people around the world.

Technical skills Must have:

• 2 years of experience writing Software , Java , Python , C
• Agile Metrics
• Agile Product Owner
• agile sprint
• Android
• Mobile Software Development
• Project Planning
• Software Project Management
• Technical Leadership
• technical software project management

Nice To Have:

• DevOps tools like GitHub
• GitLab
• Kotlin
• Kotlin Multiplatform (KMM)
• PTC Codebeamer
• Must Have: Minimum Requirements
• Bachelor’s degree in Software Engineering, Computer Science or equivalent with 8 to 10 years of managing delivery of advanced applications for mobile platform.
• Hands-on experience in mobile software development
• Android development experience (Kotlin or Java); familiarity with Kotlin Multiplatform (KMM) is a plus
• Understanding of mobile testing strategies and quality practices
• Experience working in Agile/Sprint-based development environments
• Ability to work at both technical detail and release-level view
• Experience creating and managing backlogs, tracking execution, and driving delivery
• Strong communication skills and ability to collaborate effectively across teams
• Strong attention to detail and an ability to deal with ambiguity

Nice to Have:

• Good understanding of Continuous Integration environments (Jenkins, Bamboo, ElectricCloud)
• Experience with iOS platforms.
• Experience with configuration management tools and best practices (GIT, SVN, etc.).
• Ability to think strategically and execute methodically.
• Excellent written and oral communication skills.
• Ability to multitask and prioritize while managing multiple projects and day to day responsibilities
• Ability to influence cross-functional teams without formal authority.

A Day in the Life:

• Own end-to-end delivery of an assigned mobile software release
• Translate product features and requirements into structured, execution-ready backlogs and user stories
• Lead backlog refinement, sprint planning, and overall release planning
• Approve and accept completed work in the ALM system using technical and quality judgment
• Apply technical judgment to evaluate approaches, challenge assumptions, and ensure architectural alignment and quality
• Partner with Product Engineering, Development, and Test Leads to ensure scope clarity, accurate task breakdown, and alignment with product intent
• Support prioritization discussions and maintain alignment with product strategy and system dependencies
• Identify risks and dependencies and drive mitigation plans
• Track delivery metrics and drive execution discipline across development and test teams
• Collaborate with stakeholders and communicate status, risks, and dependencies to leadership
• Ensure compliance with quality systems and software lifecycle processes
• Support regulatory deliverables in collaboration with engineering and test leads

Promote engineering best practices and continuous improvement

Miller Bros. Const., Inc. is a heavy-civil contractor specializing in earthmoving, utility installation and structure development for public roadway, industrial and commercial clients.

Title: Estimator

Job Summary:

Candidate will work with our Chief Estimator and/or Project Manager(s) to create takeoffs, put together project estimates and bids using company selected software and resources. Candidate may be required to administer/manage assigned projects during the construction phase from project commencement to project close-out.

Duties and Responsibilities:

• Prepare clear and detailed takeoffs for review and use by the Chief Estimator and/or Group Managers for Heavy Highway, Commercial, Industrial and Environmental projects to be estimated.
• Prepare clear and detailed material and line-item quantities for review and use by the Chief Estimator and/or Project Manager that will be used in preparing estimates to be bid.
• Review and understand contractual terms and conditions
• Preparation of quote solicitations and reviewing/organizing supplier and subcontractor quotes.
• Attend pre-bid and pre-construction meetings assigned by Chief Estimator and/or Group Managers.
• Subcontractor/vendor selection
• Contract review
• Project scheduling
• Cost reporting
• Contract administration
• Additional tasks as assigned.

Qualifications:

• Qualified candidate should have an associates or bachelor’s degree in Civil/Construction Engineering Technology, Construction Management or Drafting Technology (or similar accredited program).
• A minimum 3 years’ experience in civil engineering/construction management disciplines associated with Transportation, Site-Civil or Structural Infrastructure with experience in some or all of the following:
• AutoCAD Civil 3D, MicroStation, Trimble Business Center, AGTEK or similar CAD software.
• Microsoft Excel and Word.
• Bluebeam Revu or similar PDF takeoff software.
• HCSS HeavyBid or similar estimating software.
• HCSS HeavyJob or similar job reporting software.
• Calculate and present earthworks quantities, underground utility quantities and material quantities, including spreadsheet processing as required.
• Knowledge of site and/or roadway grading, DTM creation, point management, alignment and cross-section creation.
• Surveying experience is a plus.
• Scheduling.
• Quantity tracking, job reporting, and cost calculation.
• Candidate must have strong computer aptitude and able to perform mathematical calculations.
• Detail oriented with excellent organizational and communication skills, both verbal and written.
• Personable and positive outlook with a desire to provide excellent service to internal and external customers and project partners.
• Work well in a team environment with project managers/estimators that may be located in other offices.
• Ability to interpret, read and understand bid documents, construction plans and specifications.
• Ability to prioritize, remain task-oriented and meet project deadlines while working in a fast-paced environment.
• Ability to mentor & train entry to mid-level positions within estimating organization.

Physical Requirements:

• Ability to lift 35 lbs., respond quickly to sounds, ability to move safely over uneven terrain or in confined spaces, ability to respond to dangerous situations, ability to work in extreme weather, and the ability to sit or stand for long periods of time.

Work Environment:

• Will consist of mostly Office with occasional construction site visits. Some travel may be required for on-site evaluations and project inspections.

EEO Disclaimer

We are proud of the fact that we extend equal employment opportunities to all qualified employees and applicants for employment without regard to race, color, ethnicity, sex, sexual orientation, gender status, age, pregnancy, religion, national origin, citizenship, ancestry, physical or mental disability, medical condition, marital status, genetic information or condition, military or veteran status, political belief, or any other basis prohibited by federal, state or local law.

All phases of employment including, but not limited to, recruiting, hiring, selection for training, promotion, demotion, discipline, rates of pay or other compensation, transfer, layoff, termination, recall, use of all facilities, and participation in all company-sponsored activities, will be administered so as to further the principle of equal employment opportunity.

Location: Remote, U.S.-based, with preference for candidates based in Florida or the Southeast

Job Type: Full-Time

Travel: 25%+ based on client and business needs

About DDSCAD

DDSCAD helps architecture, engineering, construction, and owner organizations improve how they design, coordinate, build, and deliver projects. As an established Autodesk partner serving the industry since 1988, we combine software expertise with implementation, training, advisory, and professional services to help clients improve workflows, collaboration, and project outcomes.

Opportunity

Help build DDSCAD’s next growth engine in construction software. We combine the agility of an entrepreneurial team with the credibility and foundation of an established Autodesk partner, and we’re looking for a proven hunter to win new logos, build pipeline, and drive measurable growth—with uncapped earning potential.

We are hiring a Sales Executive – Construction Solutions to drive new business and net-new logo acquisition across the AEC market. This role focuses on Autodesk construction solutions within the Autodesk Forma ecosystem, including capabilities formerly known as Autodesk Construction Cloud (ACC).

This is a hunter role for someone who can open doors, generate qualified pipeline, run strong discovery, and close new business by connecting client pain points to software, services, and measurable business outcomes.

Role Summary

The Sales Executive – Construction Solutions is responsible for generating net-new revenue by identifying, engaging, qualifying, and closing new clients for DDSCAD’s construction software and related service offerings.

The role will focus primarily on organizations that can benefit from Autodesk’s construction technology stack, including collaboration, document control, project management, coordination, and connected workflow solutions.

This is not a passive inbound role. We are looking for a proactive, commercially sharp sales professional who is comfortable prospecting into construction and project-delivery environments and who can build credibility with executives, operations leaders, and technical stakeholders.

Key Responsibilities

●    Build and manage a pipeline of qualified new-logo opportunities focused on construction software solutions and related services

●    Prospect through outbound calls, email, LinkedIn, networking, events, referrals, partner relationships, and targeted account development

●    Identify and engage target accounts across general contractors, subcontractors, developers, owners, and AEC firms

●    Conduct discovery conversations to understand client workflows, pain points, digital transformation priorities, and business drivers

●    Position DDSCAD’s value across software, implementation, training, advisory, and client success support

●    Lead the sales process from initial outreach through qualification, solution alignment, proposal, negotiation, and close

●    Coordinate with internal technical and delivery teams to ensure accurate solution positioning and a strong post-sale handoff

●    Maintain accurate pipeline, activity, forecasting, and opportunity data in CRM

●    Build productive working relationships with Autodesk field teams and other relevant ecosystem partners

●    Stay current on construction technology trends, BIM/VDC workflows, collaboration platforms, and Autodesk’s evolving Forma ecosystem

What We’re Looking For

●    5+ years of quota-carrying B2B sales experience in the construction space

●    Demonstrated success in new business development and net-new logo acquisition

●    Proven hunter mentality with a consistent track record of meeting or exceeding sales quotas

●    Required: proven success closing mid-market deals in software, services, or solution sales

●    Preferred: experience supporting or closing enterprise-level opportunities involving complex stakeholders and longer sales cycles

●    Experience selling one or more of the following: construction technology, Autodesk solutions, SaaS, AEC software, BIM/VDC-related services, consulting, or workflow transformation solutions

●    Strong consultative selling, discovery, and opportunity management skills

●    Excellent communication, presentation, problem-solving, and negotiation skills

●    CRM fluency and the ability to manage the full sales cycle independently

●    Ability to communicate effectively with executives, project leaders, operations stakeholders, BIM/VDC leaders, and technical users

●    Disciplined follow-up habits and strong CRM hygiene; Salesforce experience is preferred

●    Familiarity with the AEC industry and construction project-delivery environment is strongly preferred

●    Professionals with real-world experience in VDC, preconstruction, and/or field construction, combined with a genuine passion for technology and digital transformation, are especially encouraged to apply

●    Bachelor’s degree preferred, or equivalent relevant experience

●    Willingness to travel 25%+ in support of client engagement, business development, and team collaboration

What Success Looks Like

●    Consistent creation of qualified pipeline

●    Growth in net-new accounts and closed-won revenue

●    Strong alignment between what is sold and what DDSCAD can deliver successfully

●    Clear CRM visibility, forecast accuracy, and professional follow-through

●    Trusted relationships with clients, internal teams, and Autodesk stakeholders

What We Offer

●    Medical, dental, and vision benefits offered

●    401(k) with company match

●    Generous vacation, sick time, and paid holidays

●    Ongoing training and professional development

●    A collaborative, growth-focused culture with opportunities for advancement

●    Remote flexibility, backed by a strong technical and administrative support team

●    Competitive base salary with uncapped commission potential

Why Join DDSCAD

●    Join a company operating at the intersection of software, services, and digital transformation in the AEC industry

●    Sell solutions that address real operational and project-delivery challenges

●    Work closely with leadership and subject-matter experts in a focused, entrepreneurial environment

●    Help shape growth in a market where strong performers can make a visible impact

Compensation

●    Competitive base salary

●    Uncapped commission structure

●    Target earnings aligned with experience and performance

●    Benefits package and paid time off

Target Compensation Range

●    Base salary: Depends on experience between $75k to $100k

●    On-target earnings: $170,000–$210,000

●    Commission: Uncapped

Apply

If you have a proven track record in new-business sales, understand the construction industry, and want to help scale a high-growth construction software practice inside an established Autodesk partner, we’d like to hear from you.

Immediate need for a talented Cybersecurity Sr. Specialist. This is a 12+ Months Contract opportunity with long-term potential and is located in Columbus, OH and Altavista, VA(Onsite). Please review the job description below and contact me ASAP if you are interested.

Job Diva ID: 26-07658

Pay Range: $40 - $44/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location).

Key Responsibilities:

• Conduct cybersecurity risk assessments and vulnerability management across OT environments.
• Work closely with site engineering, operations leadership, corporate IT/OT teams, vendors, and system integrators.
• Identify and mitigate cyber threats impacting manufacturing equipment and control systems.
• Help design secure architecture across IT and OT overlapping environments.
• Manage security incidents and ensure controlled response during threats.
• Develop and maintain risk registers, security controls, and mitigation plans.
• Communicate risks effectively and influence stakeholders who may not initially recognize security threats.
• Initial focus will be two manufacturing sites (Columbus & Altavista).
• First 90 days priorities:
• OT asset inventory
• Threat modeling
• Risk registration
• Incident response planning
• The goal is to protect manufacturing OT assets from cyber threats while maintaining uninterrupted 24/7 plant operations.
• Conduct cybersecurity risk assessments for software, systems, and network infrastructure.
• Perform threat modeling using tools such as STRIDE.
• Conduct and support vulnerability assessments and penetration testing.
• Ensure compliance with relevant standards and regulations (e.g., ISO 27001, NIST SP 800-82, FDA, HIPAA, GDPR, PCI DSS, etc).
• Monitor and interpret changes in global cybersecurity regulations and standards, integrating them into Client Nutrition policies and procedures.
• Support internal and external audits, including remediation coordination at Client Nutrition sites.
• Collaborate with engineering and development teams to design secure system architectures.
• Guide teams in applying cybersecurity controls throughout the software development lifecycle (SDLC).
• Monitor cybersecurity threats and develop mitigation strategies.
• Respond to and investigate cybersecurity incidents, identifying root causes and recovery actions.
• Utilize and manage security technologies including:
• Firewalls
• Intrusion Detection/Prevention Systems (IDS/IPS)
• Endpoint protection
• Data Loss Prevention (DLP)
• SIEM systems
• Log aggregation tools
• Support the deployment and operational use of Governance, Risk, and Compliance (GRC) platforms.
• Work with cross-functional teams (e.g., Engineering, QA, IT) and vendors to document and implement cybersecurity controls to achieve program requirements while enabling business outcomes.
• Subject Matter Expertise on security projects to ensure the timely, on-budget, and effective implementation of cyber security improvements that are operationally supported with validation methods in place to measure effectiveness.

Key Requirements and Technology Experience:

• Experience with secure coding practices and encryption technologies.
• Minimum 5 years of experience (less experience may be considered if candidate demonstrates strong practical cybersecurity skills)
• Strong cybersecurity background including:
• Risk assessments
• Vulnerability management
• Strong stakeholder management and influencing skills
• Ability to respond quickly to incidents while remaining calm and controlled
• Bachelor’s degree (Engineering, Cybersecurity, or related field preferred)
• GICSP – Global Industrial Cyber Security Professional
• CISSP – Certified Information Systems Security Professional
• Familiarity with NIST cybersecurity framework
• Manufacturing cybersecurity environments
• Medical device or pharmaceutical industry (preferred but not mandatory)
• Calm and effective under pressure during security incidents
• Strong communication and persuasion skills
• Ability to influence stakeholders without direct authority
• Pragmatic approach to security solutions balancing cyber protection and operational continuity
• Bachelor’s degree in Computer Science, Engineering, Information Security, or related field.
• 5 years of experience in cybersecurity, preferably in regulated industries such as food, beverage, healthcare, or medical devices.
• Experience with cloud security, network protocols (SSL/TLS, VPNs, IPsec), and secure cloud-based applications.
• Familiarity with regulatory compliance (SOX, HIPAA, GDPR, FDA cybersecurity guidance)
• Proficiency in threat modeling, risk management, vulnerability management, and incident response.
• Experience securing both software and hardware systems in manufacturing environments.
• Strong understanding of cybersecurity frameworks (ISO 27001, NIST, SOC 2, HITRUST, NIST SP 800-82).
• CISSP, CISM, or equivalent certification preferred.

Our client is a leading Healthcare Industry and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration.

Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

Immediate need for a talented R&D Project Manager. This is a 12+ months contract opportunity with long-term potential and is located in San Diego, CA(Hybrid). Please review the job description below and contact me ASAP if you are interested.

Job ID:26-08555

Pay Range: $60 - $90/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location).

Key Responsibilities:

• Lead and manage multiple R&D programs and/or large-scale product development projects, from feasibility through commercialization, including Class II and/or Class III medical devices (with emphasis on electrically active/medical electrical equipment where applicable).
• Develop and maintain integrated program plans, timelines (Gantt charts), budgets, resource plans, and risk registers; proactively identify and mitigate risks across technical, regulatory, clinical, commercial, and electrical safety dimensions.
• Define project scope, objectives, deliverables, and success criteria; create and maintain project charters, work breakdown structures (WBS), and detailed schedules.
• Lead cross-functional core teams (R&D/Engineering, Quality, Regulatory Affairs, Clinical, Manufacturing, Marketing, and Operations) to execute program objectives; facilitate effective decision-making and resolve conflicts.
• Drive adherence to Design Control processes (21 CFR 820.30), risk management (ISO 14971), usability engineering (IEC 62366), basic safety and essential performance requirements for medical electrical equipment (IEC 60601-1 series), and other applicable standards throughout the product lifecycle.
• Provide regular status updates, executive-level reporting, and dashboards to senior leadership and stakeholders; communicate program progress, issues, decisions, and changes clearly and proactively.
• Support regulatory strategy development and submissions (e.g., 510(k), PMA, technical files for CE marking), including coordination of electrical safety testing, EMC compliance (IEC 60601-1-2), and collateral/particular standards as needed.
• Foster a collaborative, innovative, and compliant culture within program teams.
• Oversees and manages the operational aspects of ongoing projects and serves as liaison between project management and planning, project team, and cross functional teams management.
• Lead cross-functional teams through identification of risks & mitigations, problem resolution and root cause analysis, corrective and preventive action.
• Develop and maintain integrated project plan with risk-based timeline, critical path milestones, resource allocation, roadmap with clear milestones for gap analysis, risk management, remediation, testing, certification and budget tracking to support certification goals
• Monitor the effectiveness and performance of the launch and project team and facilitate the development of contingency plans, recommending corrective actions as required.
• Ensure compliance with quality management systems and regulatory requirements, where applicable.
• Lead the team to prepare for and execute Phase Gate. Represent the team with Client leaders, ensuring such decisions are informed by a balanced and clearly articulated representation of the relevant data.
• Leverage technical acumen to partner with engineering teams, monitor development progress, and ensure alignment between technical deliverables and program timelines
• Drive design control discipline throughout product development, ensuring compliance
• Conduct or oversee gap assessments against general, collateral, and particular standards for medical electrical equipment safety and essential performance.
• Manage integrated risk management (per ISO 14971), including essential performance definition, hazard analysis, risk controls, and verification.
• Coordinate and manager the execution of test plans for electrical safety, EMC, mechanical, environmental, and essential performance requirements; coordinate pre-compliance and formal third-party testing.
• Oversee compliance documentation: technical files, risk management files, test reports, essential performance rationale, and certification justification.
• Integrate compliance activities with the quality management system (ISO 13485) and other regulatory requirements (FDA, EU MDR, etc.).
• Serve as primary liaison with notified bodies, test labs, and regulatory consultants to support certification and post-compliance needs.
• Drive a safety-focused culture while ensuring the team meets the September 2027 compliance target

Key Requirements and Technology Experience:

• Key Skills;Bachelor’s degree in Engineering (Biomedical, Electrical, Mechanical, or related),Life Sciences, or equivalent.
• 3-5 years of project management in medical devices, with ≥5 years leading compliance programs for medical electrical equipment.
• Proven track record of successfully delivering medical device programs from concept to market launch (including regulatory clearance/approval).
• Strong knowledge of FDA Quality System Regulation (21 CFR Part 820), ISO 13485, ISO 14971 risk management, IEC 62304 (software), and global regulatory pathways (510(k), De Novo, PMA, MDR).
• Proficiency with project management tools (e.g., MS Project, Jira, Smartsheet, or similar) and standard office software.
• Project Management Professional (PMP) certification not required but is preferred
• Scrum Master and SAFE Agile certification is preferred.
• Experience in medical device industries required, including experience in FDA or other regulated environments.
• Knowledge of the medical device industries beneficial integrating science and technology into business processes.
• Technical background in electrical, mechanical, or biomedical engineering
• Expert in the development and deployment of program management tools and techniques including methods for tracking progress, risk management and delivery of major milestones.
• Understanding of engineering development lifecycles and the ability to translate technical inputs into program-level actions and timelines
• Excellent influencing skills with the ability to achieve challenging goals through others without direct authority across different functions, external partners, geographies, and cultures.
• Drive for accountability within self and others.
• Proven project management experience with delivering medium-to large-scale projects in managed service model from concept through delivery and operations
• Relentless advocacy for the customer with a focus on meeting or exceeding customer requirements.
• Driving the team to make trade-offs that optimize customer and business value while maintaining program velocity and outcomes that sustain the highest standards of quality.
• Direct experience with major test labs and certification bodies for medical electrical equipment standards.
• Experience with programmable electrical medical systems (PEMS) or software-inclusive devices (IEC 62304 knowledge a plus)
• Proven success taking Class II (or higher) active medical electrical devices from gap assessment through third-party certification.
• Strong knowledge of ISO 14971, ISO 13485, general/collateral/particular standards for medical electrical safety and essential performance, and EMC requirements.
• Familiarity with FDA QSR (21 CFR Part 820), EU MDR/IVDR, or other global regulations.

Our client is a leading Pharmaceutical Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration.

Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, colour, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.