Intersolutions Llc Ein Number Jobs in Usa
3,840 positions found — Page 6
Accounts Payable Specialist
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Client Organization Scope:
- $150m+ Revenue
- 300+ vendors in AP system
- 80-85% of invoices are PO-related and require 3-way match
- Multi-site responsibility
Accountability:
Owns execution of full-cycle Accounts Payable process. Prepares and processes all accounts payable according to terms, resolving any discrepancies between PO/Receiver/Invoice as needed with limited supervision. Corporate Credit Card reconciliation and follow up on delinquent submissions.
Duties/responsibilities include, but are not limited to the following:
- Must have experience in a Manufacturing environment
- Performs 3-way match of PO, receiver and invoices
- Contacts vendors as needed to request statements and resolve any issues or respond to their inquiries; Assists in resolution of complaints between vendor and customer
- Communicates with buyers on PO discrepancies
- Distributes non-PO invoices for approval
- Processes corporate purchasing credit cards
- Prepares weekly vendor payments by check and ACH; prepares Positive Pay and ACH files for uploading to bank site
- Controls check signatures and distribution to vendors
- Responsible for following up on outstanding "uncashed" checks
- Maintains W-9 documents for all vendors to accurately produce annual 1099s
- Assists with annual financial audits
- Assists accounting staff in the month end close process; ensure that all invoices are posted in the appropriate fiscal month and all invoices that have not yet been received are properly accrued for.
- Maintain accurate and complete records for all accounts payable transactions
- Participates in training and instruction as directed
- Reviews Accounts Payable Aging and Goods Received and Not Invoiced reports for accuracy maintaining GRNI under 90 days of receipt.
The above listed responsibilities are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all responsibilities or duties required. Incumbents will be expected to perform other duties as assigned.
Position Requirements
Qualifications:
- Associate's Degree in Accounting or comparable work experience; 3+ years'
- Must have experience in a Manufacturing environment
- Minimum of 2 years of full-cycle Accounts Payable experience
- Proficiency in Microsoft Excel, Word and Outlook software applications, knowledge of Epicor a plus
- Working knowledge of chart of accounts for proper general ledger coding.
- Demonstrated time management skills with good attention to detail
- Ability to interact effectively with people at all levels of the organization
- Ability to work independently to identify and resolve exceptions and discrepancies
Shift
Days
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Accounting/Finance
Req Number
ACC-25-00007
Position
Accounts Payable Specialist
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Production Manager
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Role Summary/Purpose
The Production Supervisor at PCX Aerosystems Santa Ana, CA will lead daily operations in one of several departments at the plant to ensure reliability and consistency on the production line. Assignments may include time in the machine shop, assembly, test, overhaul and fuel tank departments. This role will lead a team of hourly production employees to meet orProexceed production, safety, quality goals and delivery goals while maintaining positive employee relations.
Essential Responsibilities
- Oversight and management of front-line hourly manufacturing employees
- Develop operational plans for assigned areas/departments of responsibility including, but not limited to: asset utilization, manufacturing loss improvements, delivery, budgets and effective scheduling of manpower / resources
- Act as a focal point and monitor assigned areas to ensure hardware and subassemblies' delivery dates meet production needs
- Coordinate the efforts of cross-functional groups and across shifts to resolve bottlenecks
- Assure timely shipments to all customers
- Drive process/product improvement programs in areas of responsibility
- Enforce company policies
- Lead cell/group to achieving goals and improvement in quality, delivery and cost reduction
- Ensure communication of key business/customer issues to employees
- Provide total cell/group leadership to continuously improve manufacturing, test, assembly and process for all assigned products/processes/areas as assigned
- Advocate six sigma processes to all aspects of cell/group
- Provide ongoing support in the scheduling of resources, technical leadership and facilitating the production process and flow of hardware to meet customer requirements
- Proactively support and participate in plant wide activities and initiatives
Works with business leadership at all levels
Delivers products as part of a team.
Position Requirements
Qualifications/Requirements
* Bachelor's degree from an accredited university or college (or a high school diploma/GED with at least 5 years of experience in Manufacturing)
* Minimum 3 additional years of supervisory experience in operations/industrial environments
* Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening.
Desired Characteristics
* Bachelor's degree in Engineering preferred
* Ability to work non-traditional hours including weekends as needed
* Strong oral and written communication skills.
* Strong interpersonal and leadership skills.
* Ability to influence others and lead small teams.
* Lead and coordinate multiple initiatives of moderate scope and impact simultaneously
* Effective problem solving skills.
* Ability to effectively work across all functions (i.e., HR, finance, sourcing, production, materials, shipping/receiving, sales, contracts, EHS, etc.) within a matrix organization to achieve organizational goals/objectives
* Prior experience leading production teams within a manufacturing environment
* Prior experience in Machining and/or Fabrication/Assembly
* Experience as manufacturing process leader preferred
* Aerospace industry experience preferred
* Six Sigma / Green belt certified preferred
* Familiarity with Lean Manufacturing, working with VSM, Visual Management and DMAIC principals
* Ability to complete manpower planning and analysis including productivity, efficiency and overtime management
LANGUAGE SKILLS
Ability to effectively communicate with peers and supervisors and provide technical feedback as
required. Ability to read and comprehend simple instructions, company communications, and
memos. Ability to write reports and simple correspondence. Ability to effectively present information
in one-on-one and small group situations to customers, clients, and other employees of the
organization.
MATHEMATICAL SKILLS
Ability to apply concepts of basic math techniques.
COMPUTER SKILLS
To perform this job successfully, an individual must be proficient in basic computer skills.
REASONING ABILITY
Ability to define and solve practical problems. Ability to interpret a variety of technical instructions in
mathematical, diagram, written or verbal format. Ability to deal with problems involving several
abstract and concrete variables in standardized situations. Ability to apply common sense
understanding to carry out instructions furnished in written, oral, or diagram form.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee must be able to stand at least 6 to 8 hours a day. Must be able to work with their hands, arms and be extremely accurate. Must be able to walk, sit, stoop, kneel, crouch, or crawl on a regular basis. Must be able to lift and/or move up to 10 pounds on a frequent basis. Must be able to lift and/or move up to 25 pounds on a regular basis. Specific vision abilities required by this job include close & color vision
WORK ENVIRONMENT
While performing the duties of this job, the employee is regularly exposed to moving high speed machinery and mechanical parts. The employee is occasionally exposed to wet and/or humid conditions. outside weather conditions, machine oils, metal fillings, acetone, paints, solvents, grease, cutting fluids, fumes or airborne particles, toxic or caustic chemicals, and risk of electrical shock or vibration. The noise level in the work environment is usually loud.
Integral Aerospace, Inc dba PCX Aerosystems - Santa Ana is an equal opportunity/affirmative action employer. We consider applicants without regard to race, color, religion, creed, gender, national origin, age, sex, sexual orientation, disability, genetic information, marital or veteran status, or any other category protected by federal, state or local law.
Shift
Various Shifts
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Santa Ana
Category
Manufacturing
Req Number
MAN-25-00008
Position
Production Supervisor
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
Jacqueline Cadena
This position is currently accepting applications.
Apply Now
Sr Manufacturing Engineer - Metals
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The Sr Manufacturing Engineer is responsible for the technical development, oversight and improvement of manufacturing processes within the area of responsibility. This individual will lead process optimization, technical problem-solving, and cross-functional manufacturing initiatives. This role is accountable for achieving senior-level competence Plans and presents engineering program and product design reviews for compliance with engineering principles, company standards, customer contract requirements, and related specifications. Develops and requests design and specification change releases. Assesses and communicates impact of engineering initiatives to functional groups. The ideal candidate demonstrates advanced technical depth, measurable impact on production performance, and the ability to mentor mid-level and entry-level engineers while partnering with cross-functional stakeholders. This role is classified as Exempt for FLSA purposes and reports to the Engineering Manager.
Pay Range: $110,00.00 to $137,000.00 per year. Final compensation will be based on experience and qualifications.
Essential Responsibilities
- Develop, release, and maintain detailed technical work instructions for the manufacture and repair of aerospace metallic structures and assemblies, ensuring full compliance with customer(s) engineering definition and regulatory requirements.
- Partner with CNC Programming group to develop and implement manufacturing plan for complex metallic machined components/assemblies.
- Provide advanced technical support to Quality and Operations teams to achieve site-level Safety, Cost, Quality, and Delivery (SCQD) objectives; act as a primary escalation point for complex manufacturing issues.
- Partner with Purchasing and Sales during the quoting process to define manufacturing approach, assess technical risk, establish labor standards, and ensure cost competitiveness.
- Establish and validate operational standard hours using time studies and process analysis; drive accuracy in routing and capacity planning assumptions.
- Review engineering drawings, specifications, and model-based definitions to ensure manufacturability; translate design requirements into controlled shop-floor documentation.
- Train and mentor operators and junior engineers on manufacturing methods, process controls, and quality standards; elevate overall technical capability of the team.
- Lead productivity and cost-reduction initiatives through Lean principles, waste elimination, and process optimization; quantify and report measurable performance improvements.
- Develop, validate, and industrialize manufacturing processes for new product introduction (NPI), ensuring processes meet defined capability, repeatability, and quality targets prior to production release.
- Evaluate nonconforming components and determine repair feasibility; develop and validate repair schemes in coordination with Engineering and Quality functions
The individual is required to be a supportive member of Environmental Safety & Health (ESH) and Quality System policies to provide a safe work place and eliminate conditions and behaviors which may cause work related illnesses and/or injuries while delivering quality product and services on time.
Position Requirements
Bachelor of Science in Mechanical Engineering, Manufacturing Engineering, Chemical Engineering, Aerospace Engineering or relevant technical discipline, or HS Diploma/GED w/equivalent composite/aerospace manufacturing/repair experience. 5+ years of technical experience with composites and/or aerospace components production or repair.
Desired Characteristics
- Demonstrated experience creating, structuring, and maintaining complex multi-level Bills of Material (BOMs) for aerospace assemblies, ensuring configuration control and production readiness.
- Proven experience in the developing and implementing machining strategies of large-scale metallic aerospace structures, including fixturing for both Milling and Turning.
- Hands-on experience machining large metallic aerospace components, including process planning, tooling strategy, and dimensional validation.
- Strong proficiency in engineering drawing interpretation, including advanced Geometric Dimensioning and Tolerancing (GD&T) application and tolerance analysis.
- Working knowledge of CAD systems such as CATIA, SolidWorks, NX; ability to interrogate models to support manufacturability and tooling design decisions.
- Experience designing and validating manufacturing tooling for, including production fixtures, machining/holding fixtures and assembly aids.
- Demonstrated change management capability, including leading engineering change implementation across cross-functional teams; ability to manage risk, stakeholder alignment, and execution discipline.
- Strategic thinker capable of translating high-level engineering change initiatives into structured, tactical execution plans; analytical, data-driven, and results-oriented.
- Strong background in continuous improvement methodologies including Six Sigma, Lean Manufacturing, and ACE; proven record of measurable operational improvements.
- Excellent written and verbal communication skills with the ability to influence across organizational levels; demonstrated ability to build engagement and sustain a culture of operational excellence
- Strong familiarity with Microsoft Office products (Word, Excel, PowerPoint, etc.) required.
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Santa Ana
Category
Engineering
Req Number
ENG-26-00001
Position
Sr Manufacturing Engineer - Metals
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
Jacqueline Cadena
This position is currently accepting applications.
Apply Now
VTL Machinist (2nd Shift)
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Workign knowledge on VTL and Horizontal lathes. Troubleshoot machinery and programming issues to exceed production goals. Adjust offsets daily based on work orders and changing production needs. Monitor and adjust processes or equipment to improve quality and productivity.
- Minimum 5 years of experience in set up of CNC vertical and horizontal Lathes.
- Must have knowledge in the use of precision measuring equipment and thickness gage instruments and their applications.
- A strong understanding in blueprint reading and geometric tolerancing interpretation.
- Intermediate knowledge of cutting tools, boring bars, inserts and tool holding devices associated with their function.
- The ability to follow planning and written instructions is a must.
- Must have excellent verbal and written communication skills.
- Must be able to adapt to changing work environment and have the ability to deal with frequent change and delays and or unexpected events.
- Must be willing to work flexible shifts and changing work schedules.
- Must have sufficient math skills that include the use of adding, subtracting, multiplication geometry, algebra required for fabrication of critical Aerospace components.
- CNC programming skills is a plus.
- Past experience with G & L or other VTL lathes.
- Must have experience with Fanuc controls.
- Must be flexible enough to perform duties as required by Management.
Responsibilities
- Support operators on adjoining shifts with the loading and unloading of parts and fixtures to ensure a smooth transition of work and their instructions.
- Responsible for the setting of tool, offsets, simple edits as instructed by the programmer.
- Responsible for detecting and reporting of equipment malfunctions and possible out of tolerance conditions before they happen.
- Responsible for communication between departments ie, Quality, Production Control, to help resolve any Quality and or Programming concerns.
- Responsible for daily P.M. of machines to make sure machines being operated are in good working order.
- Responsible for maintaining clean and organized work area.
- Required to comply with company policies and procedures as well as all state and federal regulations.
Position Requirements
Shift
Nights
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Manufacturing
Req Number
MAN-26-00006
Position
VTL Machinist, 2nd Shift
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Production Planner
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The Production Planner will be responsible for the planning and scheduling of raw materials, jobs & operations (in house and outside) within an ERP environment and on the shop floor. This role will be responsible for ERP data integrity as well as the flow of the jobs throughout the manufacturing process.
Planner will also be required to achieve high level of customer product delivery (ship to commit) integrity while keeping minimum inventory level of finished goods and WIP.
Key responsibilities - other duties may be assigned:
- Monitor MRP signals (Material buys, job release dates, overdue/exception notices).
- Review MPS/MRP and customer's online portals for demand forecast while maintaining Min/Max levels.
- Review material and outside vendor (OSV) processing requirements.
- Create, release and maintain material requisitions and jobs to meet customer demand.
- Submit and track status of Material and OSV requisitions; confirm PO creation.
- Create and release work orders; maintain work order accuracy (Engineering Changes (ECs), process changes, reprints, etc.).
- Coordinate with production, engineering, sales, purchasing & shipping/receiving to expedite the flow of work orders.
- Monitor and take immediate reschedule action in case of customer demand changes (push-out or pull-ins).
- Audit and maintain ERP system inventory data for accuracy, including cycle count program.
- Work with operations team to analyze work center load/capacity and schedule work accordingly.
- Provide monthly/weekly delivery commitments and ensure 100% commit integrity.
- Monitor finished goods inventory, work in progress and reduce levels to satisfy the company's target metrics.
- Execute inventory transactions from issuance of material to creation of finished goods shippers.
- Achieve high level of customer Percent On Time Delivery (%OTD) performance and minimize overdue/past due orders.
- Participate in continuous improvement and cost saving initiatives.
Position Requirements
Skills and qualifications:
- A proactive team player with a background in production planning/scheduling and inventory control in a capacity-constrained system.
- Prior machine shop planning experience preferred, but not required. Some manufacturing planning experience beyond simple assembly is required.
- Knowledge and experience of MRP/ERP and schedule control in a data-driven environment.
- Proficient in MRP (Epicor preferred but not required)
- Must possess excellent reasoning and communication skills.
- This role requires a high level of energy, creating thinking and problem solving abilities.
- Ability to manage multiple tasks and establish effective work priorities
- Proficient in MS office
Education & Experience:
- Bachelor's degree or high school diploma / GED and at least 3-5 years of experience in a production planning capacity or related aerospace experience
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Enfield
Category
Manufacturing
Req Number
MAN-25-00024
Position
Production Control Planner
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Manufacturing Technician * Clean / Deburr (2nd Shift)
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Under general supervision, deburr, weld prep and/or clean titanium and aluminum components and sub-assemblies to support all core processes, such as machining, welding, and NDE.
Essential Responsibilities
- Support the highest standards of safety and environmental practices.
- Deburr machined components for sharp edges.
- Hand blend machined and welded surfaces to drawing requirements.
- Hand abrade components to desired finish for weld.
- Clean components and assemblies per drawing and/or manufacturing work instructions.
- Make a continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively.
- Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment.
- Check work after completion of each operation in job and/or completed job to ensure it is complete per drawing and/or manufacturing work instruction.
$23-$26 per hour
Position Requirements
- High school diploma or General Education Degree (GED).
- Aerospace manufacturing experience preferred.
Shift
Second
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Long Beach
Category
Machine Shop
Req Number
MAC-26-00002
Position
Manufacturing Technician - Clean / Deburr (2nd Shift)
Close Date
Post Internal Days
0
Number of Openings
2
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
Jacqueline Cadena
This position is currently accepting applications.
Apply Now
EHS Manager- Santa Ana
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The Environmental Health & Safety Manager (EHS) is responsible to ensure compliance with all safety rules and regulations, the physical security of all company locations, and to assist individuals to be in compliance. This position is responsible for ensuring company is in compliance with all agencies (DOT, OSHA, NFPA, and EPA) regulations, training, and any other requirements by such agencies, our insurance companies, and company requirements. The EHS Manager will serve as a subject matter expert on all safety, compliance, regulatory and related insurance requirements.
Pay Range: $120,000 to $135,000.00 per year
Essential Duties and Responsibilities include the following. Other duties may be assigned.
- Serve on local safety committees; review and discus safety needs, provide updates, training, DOT, Hazmat, OSHA and related safety and compliance information.
- Implement and manage a comprehensive safety training program base on OSHA and industry specific requirements.
- Manage the workplace ergonomics program, active response and adjustments result in negating any mandatory program requirements.
- Review facility procedures and work instructions consistent with ISO formatting.
- Develop Safety Risk Assessment procedures
- Provide subject matter expertise in Process Safety ensuring industry best practice.
- Site inspections and corrective action(s):
- Train and direct management to inspect facilities, work sites and equipment for violations and hazards.
- Provide direction to management on correcting identified problems in a timely manner.
- Follow up to make sure all corrective actions were taken and completed.
- Assist where needed.
- Responsible for updating, maintaining and auditing location safety standards and procedures on a quarterly or annual basis as needed.
- Develop effective training programs for managers/employees that will efficiently cover all needed/required materials.
- Investigate all accidents to determine the root cause and provide recommendations that eliminate or reduce future hazard or risk.
- Track and control inventory of safety supplies and equipment and work with division managers to keep adequate safety supplies on-hand.
- Assist with training for new hires and provide ongoing training of all employees.
- Review and update MSDS and SPCC plans as needed
- Evaluate the effectiveness of the safety program using established goals and make recommendations, and implement corrective action(s) based on industry standards and best practices.
- Conduct an annual training for the site that promotes a safe, healthy, and secure work environment that includes emergency situations (like tornados, fires), use of the alarm system, and anything else necessary to promote a safe work environment.
- Serves as a safety/compliance liaison with outside organizations.
Required Skills:
? Extensive knowledge of OSHA, DOT, NFPA, EPA, other governmental regulations and laws including OSHA 300 logs and requirements by our insurance providers.
? Knowledge of instructional methods and training techniques
Qualifications:
? Bachelor's degree in safety or related field or equivalent work experience.
? 5 years safety management experience.
? Excellent interpersonal, communication, and problem solving skills.
? Knowledge of statistics, data collection and analysis.
? Knowledge of federal and state regulations.
? Proficient in MS Office products.
? Occasional travel required.
Prefer:
? OSHA General Industry 10 or 30 hour training course
? Forklift training experience
Position Requirements
Shift
Days
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Santa Ana
Category
Health and Safety
Req Number
HEA-26-00001
Position
EHS Manager- Santa Ana
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
Jacqueline Cadena
This position is currently accepting applications.
Apply Now
Manufacturing Process Engineer
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Plans and designs manufacturing processes throughout the plant. This position maximizes efficiency by analyzing all aspects of manufacturing processes. Determines parts and tools needed to achieve product specifications and business objectives.
Essential Duties & Responsibilities:
Under general direction, performs the management of projects related to aerospace component engineering and manufacturing for new and existing parts and assemblies. Establishes manufacturing methods and process sequence necessary to complete parts. Creates models, operation sheets and work instructions using Solidworks software. Initiates Tool & Fixture design concepts and maintains close feedback with other shop floor personnel, management and related customers and vendors. Troubleshoots manufacturing problems and implements method and tool improvements. Writes rework and repair methods for non-conformances and prepares projects timelines. Participates in discussions with customers and suppliers as required. Performs additional duties as requested, including cost estimating.
Required Knowledge, Skills, & Abilities:
- Reads and interprets blueprints, symbols and geometric tolerances based on military and commercial specifications.
- Able to process complex assemblies and conceptualize developmental and production tooling in a job shop environment.
- Proficient with the following software applications: Solidworks (or equivalent), MS Project / Word / Excel.
- Able to create Solid models, operations sheets, Tool and Fixture designs.
- Familiarity with specifications and requirements for aerospace component manufacturing that includes having knowledge of aerospace coatings, heat treatment, and machining specifications.
- Strong math background including trigonometry and geometry.
- Able to research, understand and implement new technologies for possible cost savings and process improvements.
- Good verbal and written communication skills and the ability to work well with others in a team-based environment.
- Able to perform hands-on shop work.
- Proficient in project management.
Working Conditions:
Normal office working conditions with the absence of disagreeable elements. Manufacturing Engineers spend a good amount of time on the shop floor.
EOE Statement:
PCX Aerosystems is an equal opportunity employer.
Position Requirements
Education & Experience Required:
- High School Diploma or equivalent and 3-5 years' experience in an aerospace manufacturing environment.
- Prior experience to range from engineering to expediting on shop floor utilizing detailed team input for instruction/directions.
- AS/BS in Engineering Science is advantageous.
Shift
Days
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Engineering
Req Number
ENG-26-00003
Position
Manufacturing Process Engineer
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
CNC Milling Machinist, 1st/2nd Shifts
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The CNC Milling Machine Operator builds the operator's skills and knowledge to efficiently perform and maintain the manufacturing processes vertical and horizontal multi-axis milling machines to produce precision aerospace components.
Responsibilities:
- Operate vertical and horizontal multi-axis milling machinery as required with supervision.
- Use manual inspection equipment as required, e.g. height stands, micrometers, indicators, dial bores, verniers
- Work with aerospace materials such as aluminum, stainless steel, magnesium, titanium, and nickel alloys.
- Read/interpret operation sheets and work instructions.
- Adhere to established policies and company procedures and standard work.
- Participate in process improvement initiatives utilizing lean manufacturing tools and techniques.
- Document and communicate manufacturing performance issues to maintain continuity between shifts and decrease machine downtime.
- Maintain work areas and equipment in a clean and orderly condition.
- Follow all safety policies, rules and regulations.
- Other duties as assigned by Leads, Supervisors and/or Managers.
Physical Requirements:
- Ability to stand or sit for extended period of time on a concrete manufacturing floor.
- Fine motor skills with frequent hand and arm movement.
- Ability to lift up to 50 pounds.
- Moderate twisting and bending.
- Moderate climbing on step stools or platforms.
Unusual Environmental Conditions:
- Loud machining environment; exposure to aerospace metals, lubricants and chemicals.
Required Personal Protective Equipment:
- Safety glasses/shields, appropriate manufacturing closed toed footwear, gloves, hearing protection may be required or other protective equipment as needed.
Qualifications:
- US Citizen
- High School Diploma or equivalent.
- Technical school graduate in machining (desired)
- Minimum of 5 Years of Machining Experience.
- Strong machine setup skills.
- Aerospace experience required.
- Ability to work with tight tolerances.
- Strong industrial math skills, required.
- Strong written and verbal skills.
- Ability to read technical drawings.
- Ability to use and setup various measuring devices.
- Strong problem-solving skills.
- Lean basic knowledge i.e. 5S, setup reduction, TPM.
- Ability to read & interpret machining program language.
Position Requirements
Shift
Various Shifts
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Manufacturing
Req Number
MAN-25-00001
Position
CNC Milling Machinist, 2nd Shift
Close Date
Post Internal Days
0
Number of Openings
3
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
Lisa Czaja
This position is currently accepting applications.
Apply Now
HRIS Manager
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The HRIS Manager is responsible for the strategic ownership, administration, and evolution of the organization's Human Capital Management (HCM) systems. This role plays a critical part in supporting a fast-growing, acquisition-driven company by ensuring HR systems scale efficiently, integrate seamlessly, and deliver reliable data to support workforce decisions.
The ideal candidate brings deep experience in high-growth environments, M&A integrations, and enterprise HCM implementations, with the ability to balance hands-on system execution with long-term HR technology strategy.
HRIS Strategy & System Ownership
- Serve as the owner and subject matter expert for the organization's HCM ecosystem (HRIS, payroll, time & attendance, benefits, talent modules, integrations).
- Partner with HR, Finance, IT, and external vendors to ensure system stability, data integrity, and optimal user experience.
- Act as a trusted advisor to HR leadership on HR technology capabilities and limitations.
- Translate business needs into system solutions and clearly communicate technical concepts to non-technical stakeholders.
Implementation & Optimization
- Lead end-to-end HCM implementations, upgrades, and module expansions, including requirements gathering, configuration, testing, deployment, and post-go-live stabilization.
- Manage implementation partners and vendors, ensuring projects are delivered on time, on budget, and in alignment with business requirements.
- Continuously evaluate system functionality and recommend enhancements to improve automation, efficiency, and reporting.
Mergers & Acquisitions Support
- Support HR Leadership with HRIS due diligence for acquisitions, including system assessments, data mapping, and integration planning.
- Execute HRIS integrations for acquired entities, including data conversion, process alignment, and change management.
- Support rapid onboarding of newly acquired workforces while maintaining compliance and data accuracy.
Data, Reporting & Compliance
- Ensure HR data accuracy, governance, and security across all systems.
- Establish routine/automated reporting to meet business needs and support ad-hoc reporting as needed.
- Support compliance with federal, state, local, and international employment and payroll regulations as applicable.
Position Requirements
Business Intelligence & Reporting
- Advanced experience in BI report writing and dashboard development to support HR, Finance, and executive leadership.
- Ability to translate workforce and compensation data into actionable insights using HCM reporting tools and/or external BI platforms (e.g., Power BI, Tableau).
- Strong understanding of data structures, data validation, and audit controls to ensure accuracy and consistency across reports.
- Experience delivering recurring operational reports as well as ad hoc analytics for headcount, labor cost, benefits, and workforce planning.
Systems Integrations & Data Architecture
- Hands-on experience designing, implementing, and maintaining integrations between HCM systems and enterprise platforms, including ERPs, payroll engines, benefits vendors, and third-party applications.
- Strong understanding of how ERPs (e.g., financials, GL, cost centers, project accounting) interact with HCM systems to support payroll, labor costing, and financial reporting.
- Experience partnering with Finance and IT to align HR data flows with accounting structures, chart of accounts, and reporting requirements.
- Knowledge of integration methods such as APIs, file feeds, middleware, and scheduled data exchanges.
- Ability to troubleshoot data discrepancies across systems and lead root-cause analysis between HCM, ERP, and downstream applications.
- Bachelor's degree in Human Resources, Information Systems, Business, or a related field (or equivalent experience).
- 7+ years of progressive HRIS experience, including system ownership and configuration.
- Proven experience supporting high-growth organizations and scaling HR systems.
- Hands-on experience with HCM implementations (full lifecycle).
- Direct experience supporting M&A activity, including HRIS integrations and data migrations.
- Strong understanding of HR, payroll, timekeeping, and benefits processes.
- Exceptional project management, analytical, and problem-solving skills.
- Experience with mid-market or enterprise HCM platforms (e.g., UKG, Paycor)
Shift
Days
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Human Resources
Req Number
HUM-26-00001
Position
HRIS Manager
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
Michelle Johnson
This position is currently accepting applications.
Apply Now
