Intersolutions Llc Ein Number Jobs in Usa
5,053 positions found — Page 4
Job Description
Climate Control Resources LLC, a trusted HVAC leader in Prescott, Arizona for over 20 years, is hiring experienced technicians. We specialize in commercial and industrial applications, plus some unusual niches, as well as maintenance, automated controls, performance optimization, and chilled water systems. We are approximately 10% Residential, 20% niche, and 70% small commercial to industrial environments.
Key Responsibilities & What You Will Do:
* Install, service, troubleshoot, repair, inspect and maintain primarily commercial HVAC systems, including chillers, boilers (boiler knowledge, for example in a hospital setting - a big plus), air handlers, cooling towers, commercial refrigeration, and occasional residential projects.
* Diagnose issues with heating, ventilation, air conditioning, and related mechanical/electrical components in (mostly) commercial settings.
* Perform preventive maintenance, system startups, and efficiency upgrades to ensure reliable operation and compliance with regulations.
* Optimize efficiency with automated controls and energy upgrades.
* Read blueprints, schematics, and technical manuals; use diagnostic tools and controls software.
* Respond to emergency service calls and provide on-site solutions for critical commercial clients.
* Maintain accurate records, truck inventory, and safety protocols (OSHA, EPA standards).
* Mentor junior techs when needed and collaborate with project managers/engineers.
* Deliver exceptional customer service and problem-solving (especially the latter, be able to think through weird situations and come up with novel out of the box solutions).
Working Conditions:
* Ability to handle the physical workload.
* Ability to lift 50+ lbs, work at heights/ladders, and handle physical demands of industrial sites.
* Moderate physical effort is required, including standing, ladders, squatting, sitting for extended periods of time and exposure to the physical risks that come with working in HVAC.
* Reliable, safety-focused, and customer-oriented with good communication skills (we cannot overstate the importance of good communication skills as this is a mission-critical element with us).
* Work is performed in commercial, industrial and residential properties (mechanical rooms, in-home, attics, garages, crawl spaces, roofs).
* Willingness to work occasional overtime/on-call for emergency industrial needs.
Important Requirements:
* 5+ years of residential or commercial HVAC experience strongly preferred (we don't rule out ambitious newer technicians, but your actual skill level and capacity to show your knowledge will be thoroughly tested).
* Strong troubleshooting skills in large-scale systems, including chillers, cooling towers, and industrial / commercial setting.
* Mechanically inclined individual MUST have at minimum the basic tools of your trade.
* You MUST have a valid drivers license with an acceptable driving record.
* Must be efficient, organized and computer savvy (we use BuildOps as our FSM, so experience with that or other FSM's like ServiceTitan is a plus), and proficient at using laptops and tablets in the field.
* Ability to work with a high degree of integrity and promote a positive company image.
* Honest, dependable, self-motivated (super important to us), hard working (should go without saying), and have long-term goals with a willingness to work out of town when necessary (not a regular thing, but it does and will happen) and be occasionally on-call.
* Experienced plumbers and electricians looking to expand their skills are also welcome to apply.
* Knowledge of automated controls - increasingly a-must in this industry.
* EPA 608 (or equivalent) certification, along with other certs, is appreciated, and valid driver's license is a requirement.
* Strong diagnostics, safety focus, and communication skills.
* Punctual and utterly reliable - if you are those things, plus experienced or a diamond in the rough, good odds we can get you where you need to be on almost everything else.
* Love to learn new things, ideally to the point it's borderline pathological is a huge compensating plus.
Why Us?
* Competitive pay with overtime opportunities (year-round work, no slow seasons in industrial).
* Fully stocked company vehicle, uniforms, cell phone, and top-tier tools—no out-of-pocket costs.
* Ongoing training and reimbursement for advanced certifications.
* Supportive team environment with room for growth (lead tech or supervisor paths).
* Live and work in Prescott's stunning high-desert location—outdoor recreation, low traffic, family-friendly community.
If you're a proven industrial or commercial HVAC pro ready for rewarding, hands-on work with great pay and stability, or a seasoned apprentice looking to up their skills and experience to reach the next-level, we want to hear from you.
Ready to join a values-driven company focused on quality and innovation? Send your resume to us via ZipRecruiter.
Company Description
Climate Control Resources LLC** is an HVAC (heating, ventilation, and air conditioning) contracting company based in the Prescott area of Arizona, specifically serving Yavapai County and surrounding regions. We've been operating for over 20 years in Arizona (founded in 2005).
Our company emphasizes high-quality service, integrity, and customer satisfaction, with a focus on optimizing building performance and potentially reducing operating costs. We specialize in residential and commercial climate control services, including installation, repair, and maintenance of systems such as: Boilers, Chillers, Refrigeration systems, Building automated controls, Radiant hydronic systems, and also certain niche elements of HVAC that defy description (which is to say we often go where most angels fear to tread).
Company Description
Climate Control Resources LLC** is an HVAC (heating, ventilation, and air conditioning) contracting company based in the Prescott area of Arizona, specifically serving Yavapai County and surrounding regions. We've been operating for over 20 years in Arizona (founded in 2005).\r
\r
Our company emphasizes high-quality service, integrity, and customer satisfaction, with a focus on optimizing building performance and potentially reducing operating costs. We specialize in residential and commercial climate control services, including installation, repair, and maintenance of systems such as: Boilers, Chillers, Refrigeration systems, Building automated controls, Radiant hydronic systems, and also certain niche elements of HVAC that defy description (which is to say we often go where most angels fear to tread).
Job Description
- Assist in performing OSHA required annual safety inspections on overhead cranes and hoists, rigging, and under hook devices at customer facilities.
- Enter and prepare inspection reports and customer repair quotes using tablet, PC and Intuit QuickBooks.
- Perform in-shop repairs to manual, electric, and pneumatic hoists.
- Assist on service calls on cranes and hoists at customer facilities.
- Assist with overhead crane, jib crane, and runway installations at customer facilities.
- Majority of work is in Central Minnesota with very limited overnight travel (1-2 days per month) Company Description
We mainly service smaller sized companies and military installations in smaller towns in central and northern MN, and Eastern North and South Dakota. Mostly repeat customers. We sell, service, inspect, and install cranes and repair hoists in shop. Service truck provided. Top notch clean equipment provided. Clean work environment. No weekend work, but overtime is a must at times during the week. Flexible small employer- family comes first. Looking to hire a long term employee who is a self starter and can work independently. On the job training will be provided as well as additional outside training as needed.
If you are tired of the big city grind or tired of being just another number at a large company please reach out.
Company Description
We mainly service smaller sized companies and military installations in smaller towns in central and northern MN, and Eastern North and South Dakota. Mostly repeat customers. We sell, service, inspect, and install cranes and repair hoists in shop. Service truck provided. Top notch clean equipment provided. Clean work environment. No weekend work, but overtime is a must at times during the week. Flexible small employer- family comes first. Looking to hire a long term employee who is a self starter and can work independently. On the job training will be provided as well as additional outside training as needed.\r
\r
If you are tired of the big city grind or tired of being just another number at a large company please reach out.
Job Description
JPO WASH SYSTEMS, LLC
Come and be part of JPO Wash Systems, a leading distributor from South Texas! We want you to be part of our growing team as we expand to the San Antonio market. JPO strives to bring top-of-the-line car wash equipment, car wash chemicals, and car wash service to our clients.
JPO Wash Systems is looking to expand and is searching for a committed and honest individual to grow with our team. We are currently hiring service technicians. Candidates must be motivated, able to work independently, have excellent customer relation skills, and have the ability to troubleshoot quickly and effectively to provide quality workmanship.
This person will need to meet the following qualifications.
Responsibilities
· Responsible for knowing and complying with all established procedures for the performance of duties.
· Investigate customer issues and provide quality solutions.
· Perform service work on wash equipment. Replace, repair, and adjust parts and systems as necessary.
· The ability to diagnose and solve problems based on customers' non-technical descriptions. Strong working knowledge of equipment and tools used in the industry.
· Other job duties as assigned.
Required Qualifications
· Associate's degree from a two-year college or trade/technical school
· Clean driving record/Active Driver's License
· Ability to use basic math and writing skills.
· Capable of reading and interpreting schematics and blueprints
· Ability to comprehend and interpret equipment, operating, and maintenance manuals and instructions.
· Ability to multi-task, prioritize, and manage time effectively.
· Intermediate computer skills, and email communication.
· Ability to lift light to heavy weight
· Ability to intermittently and repeatedly bend, stoop, kneel, reach, twist, and perform repetitive motions using hands to grasp, push, pull, or do fine manipulations, climb ladders, and stand for prolonged periods.
JPO Wash Systems is an Equal Employment Opportunity employer to employees and applicants committed to a diverse workforce. We will consider all qualified candidates regardless of race, color, national origin, sex, age, marital status, personal appearance, or sexual orientation. Gender, family responsibilities, disability, education, political affiliation, or veteran status.
Job type: Full time, Monday-Friday, weekend availability only as needed
Benefits Include:
Health Insurance plans offered
Paid Vacation Time
Holiday and sick pay
401K benefits with employer match
Use of company vehicle
Starting salary, $50,000 DOE
Company Description
Come and be part of JPO Wash Systems LLC., a leading distributor from South Texas! We want you to be part of our growing team as we expand to the San Antonio market. JPO strives to bring top-of-the-line car wash equipment, car wash chemicals, and car wash service to our clients.
Company Description
Come and be part of JPO Wash Systems LLC., a leading distributor from South Texas! We want you to be part of our growing team as we expand to the San Antonio market. JPO strives to bring top-of-the-line car wash equipment, car wash chemicals, and car wash service to our clients.
Aerospace Quality Inspector (1st Shift)
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
In an assigned cell, perform a variety of inspection processes, using various tools and equipment, following standardized methods and established techniques, to verify production process integrity up through and which may include preparation and presentation of parts to customer for Final Inspection or sale. Assist in 1st Article presentations or Production Lot Test initiatives. Accept or reject material based on findings.
TYPICAL DUTIES:
- Work from applicable written inspection procedures, drawings, and other pertinent instructions to plan and perform dimensional and visual inspection on parts, tools, gages, and other equipment, accepting material or referring for rework or quality review based on findings.
- Use a variety of fixed and variable measuring instruments including computerized machines where program instructions are well defined to check dimensions and recording results. Perform necessary mathematical computations to determine extent of non-conformance and complete appropriate paperwork.
- Follow established procedures to perform in-line checks and verification of dimensions and make sure that operation sheets are being followed.
- Recognize need and arrange for repair or replacement of equipment used in performing work as necessary.
- Support initiatives as directed to reduce MRB and re-work requirements, and assist in the manufacture of quality parts.
- Assist on various internal program audits.
- May assist others at their direction in the investigation of unusual non-conformances, new or changed inspection sequences, and other specialized assignments within the scope and skill level of this job function.
- Support Lean Manufacturing/Continuous Improvement initiatives and function as requested.
- Recommend, and participate in environmental health and safety practices.
- Refer difficulties to higher-level Inspectors, Lead Person, and /or Supervisor.
- Perform routine servicing throughout assigned area following specified procedures, and written instructions, such as operators' checklist, for upkeep and to assure equipment operates properly.
- May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individual skills.
- May be required to train for, obtain, and maintain licenses, operator permits, and certifications within assigned area or cell.
Position Requirements
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Manufacturing
Req Number
MAN-26-00008
Position
Cell QA Inspector C
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Program Manager - Santa Ana
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Position Summary
The program manager is responsible for the execution of one or more simultaneous products according to their Product Life Cycle. Responsible for the cost, schedule and technical performance of company programs or subsystems of major programs. Participates in the negotiation of contract and contract changes. Coordinates the preparation of proposals, business plans, proposal work statements and specifications, budgets and financial terms/conditions of contract. Acts as primary customer contact for program activities, leading program review sessions with customer to discuss cost, schedule, and technical performance. Expands the product line with the customer. Establishes milestones and monitors adherence to master plans and schedules, identifies program problems and obtains solutions, such as allocation of resources or changing contractual specifications. Directs the work of employees assigned to the program from technical, manufacturing and administrative areas. Responsible for the daily execution of projects in accordance with contract requirements and company policies, procedures and guidelines. Works closely with the business development team to enhance the business portfolio of the organization. Leads monthly program reviews
Additional Duties and Responsibilities
- Support and communicate the mission, values and culture of the Company.
- Travels to customers and potential customers' facilities providing them with information and support as required to secure business
- Ensure that the right product is developed to meet or exceed company's quality standard and is delivered at the right time.
- Lead program teams and facilitate the communication and interaction among the functional representatives.
- Develop and implement recovery plans for off-schedule and unanticipated eventualities.
- Coordinate with customers, through marketing and sales, to provide necessary program status and obtain customer feedback.
- Assist in the preparation of written quotes, RFP's, RFI's and RFQ responses and sales proposals & negotiations
- Handle all customer calls on timely basis
- Ensure new product information is communicated to appropriate personnel as required
Minimum Requirements and Experience
- Bachelor's degree in a technical, business or financial discipline.
- Five + years program management experience.
- Travel is primarily locally during the business day, although some out of the area travel and overnight may be expected.
Additional Desirable Qualifications Skills and Knowledge
- Aerospace Industry experience is a must
- Defense/military industry experience
- Highest degree of integrity and compliance in all activities
- Excellent verbal and writing skills and ability to present sales proposals in person, via phone, via the web to all levels of customers/prospects
- Proven success in prospecting, hunting and farming new customers
- Demonstrated use of fair negotiating tactics & methods to build long term customer partnership
- General knowledge of accounting, manufacturing procedures, supply chain capabilities, data processing, quality control procedures and engineering
- Understanding of pricing concepts as it relates to sales of products
- Proficient in Microsoft suite of Word, Power Point & Excel
- Ability to draft moderate to complex, contractual instruments
- Excellent knowledge of legal principles to enable identification of risk in business agreements, and negotiation of the same. FMS and international contracting experience a strong plus. Knowledge of U.S. export laws (ITAR/EAR) required. Ability to travel overseas if/as required.
Physical Requirements (Lifting, Walking, Bending, Stooping kneeling etc)
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly required to sit, walk, talk or hear. The employee is frequently required to use hands to finger, handle, or feel. The employee is occasionally required to stand; walk and reach with hands and arms. The employee must occasionally lift and/or move up to 15 pounds.
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Integral Aerospace, Inc. is an equal opportunity/affirmative action employer. We consider applicants without regard to race, color, religion, creed, gender, national origin, age, sex, sexual orientation, disability, genetic information, marital or veteran status, or any other category protected by federal, state or local law.
ADDITIONAL ELIGIBILITY QUALIFICATIONS
Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening and applicants must meet INTEGRAL AEROSPACE security standards as imposed by DoD, including the issuance of any necessary security clearance by the U.S. Government within a reasonable time after commencement of employment. The Company will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen.
Integral Aerospace, Inc. is an equal opportunity/affirmative action employer. We consider applicants without regard to race, color, religion, creed, gender, national origin, age, sex, sexual orientation, disability, genetic information, marital or veteran status, or any other category protected by federal, state or local law.
This employer participates in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For further information about the E-Verify program, please click here: e-verify/employees
Position Requirements
Qualifications:
- Minimum 5 years production planning experience in aerospace or similar manufacturing industry
- A proactive team player with a background in production planning/scheduling and inventory control
- Knowledge and experience of MRP/ERP and SCM in a data-driven environment
- Proficient in MRP (Jobboss preferred but not required)
- Must possess excellent reasoning and communication skills, high level of energy, creating thinking and problem solving abilities
- Proficient in MS Office (Outlook, Excel, Word)
- APICS certification (CPIM or CFPIM) a plus.
Shift
-not applicable-
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Santa Ana
Category
Program Management
Req Number
PRO-23-00013
Position
Program Manager - Boylston
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
Jacqueline Cadena
This position is currently accepting applications.
Apply Now
Aerospace Assembly Technician (1st shift)
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
FUNCTION:
In an assigned area or cell, work with limited supervision to perform the assembly of Production aircraft parts as well as the teardown, and assembly of Overhaul & Repair designated aircraft parts.
TYPICAL DUTIES:
- Performs fitting and assembly operations on various production aircraft parts.
- Performs teardown and assembly of overhaul & repair aircraft parts.
- Cleans and applies special adhesives to materials resulting in a permanent bonding of the materials. Sets up and controls furnace temperature in accordance with established specifications.
- Must be capable of reading and interpreting blueprints, operation sheets, technical specifications and overhaul manuals.
- Maintains necessary records and files.
- Works with limited supervision.
- Assists operators in a lower classification on assembly techniques as needed.
- Performs temporary part marking, In process transfer marking and final part parking operations using Vibro Engraving, Electro-chemical Etch, Ink Stamp, Dot-Peening, and Paint marking with suitable legibility to meet drawing or customer specification requirements
- Works under supervision with salary and hourly support groups to address the most complex problems.
- Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.
- Actively participate in various aspects of Lean production and Continuous Improvement projects that drive efficiency improvements.
- Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
- May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
Position Requirements
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Manufacturing
Req Number
MAN-26-00003
Position
Assembler Aircraft A
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Quality Inspector
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The Quality Inspector is responsible for the inspection, documentation, and certification of critical components throughout the production process, including parts subject to flight safety requirements. This role ensures compliance with AS9100, customer specifications, and regulatory requirements through precise measurement and rigorous recordkeeping.
Essential Duties & Responsibilities:
Performs various inspection activities utilizing precision inspection equipment at all phases of product manufacturing. Uses GD&T concepts, customer supplied specifications, and internal standards, to ensure compliance with AS9100, NADCAP, and other regulatory requirements.
- Read and understand complex engineering drawings to determine dimensions and tolerance specifications.
- Compare recorded measurements to blueprint dimensions and tolerances and notify specified persons of discrepancies using NCF and MRB process
- Familiarity with the use of various inspection and measurement equipment, i.e. CMM, FARO Arm, Borescope, Optical Comparator, etc. preferred
- Strong understanding of units of measure and applicability to GD&T principles
- Must be self-motivated and able to adjust to a dynamic work environment and tempo while maintaining a high level of attention to detail.
- Strong professional ethics combined with the ability to function well on teams.
Position Requirements
- Experience in aerospace manufacturing or similarly regulated industry preferred.
- Familiarity with performing various inspection activities to include, i.e., 1st piece, in-process, final inspections
- High School Diploma or GED
- Knowledgeable of MS Word, and Excel
- Minimum of 3 to 5 years' experience in the operation of CMM's preferred (Mitutoyo/Metris/Zeiss)
- Familiarity with operation/programming of FARO arm preferred
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Enfield
Category
Quality Control
Req Number
QUA-25-00017
Position
Quality Inspector
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
CNC Machinist (2nd shift)
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
FUNCTION:
Set up, operate, troubleshoot and perform work on a variety of machinery. Be flexible, willing and capable of being trained on additional machines. Perform work at a consistently high level of quality. Be reliable in consistency of work and willingness to work outside of core area of expertise.
Position Requirements
TYPICAL DUTIES:
Must be capable & willing to set up operations that have previously been proven out independently without oversight of a leadman or CNC programmer.
Must be capable of running a minimum of two of the following machine types: 3 and 4 axis Horizontal and Vertical Machining Centers, 5 axis machining centers, Vertical Turret Lathes, Cylindrical Grinders, Mill/Turn machines, CNC boring machines, Horizontal lathes, manual machines.
Must be willing to perform work on machines throughout the shop, not only the machines that are within the person's core area of expertise. For example: must be willing to perform work on a Mitsubishi 4 axis machining center even when the person normally runs a Mazak 730 Variaxis.
Must be capable & willing to identify opportunities for improvement in tooling, cutting methods, mistake proofing & work instruction documentation.
Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.
Actively participate in various aspects of Continuous Improvement projects which may include but is not limited to 5S, TPM, kaizen events, and set-up reduction events, which is aligned with the commitment to continuous improvement activities in Article II of the collective bargaining agreement.
Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
Must be capable & willing to assist or train other employees in this or lower classifications as needed.
Refer difficulties to leader or supervisor as appropriate
May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
Shift
-not applicable-
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Manufacturing
Req Number
MAN-26-00005
Position
All Around Machinist - A
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Aerospace Deburr Specialist (1st Shift)
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
FUNCTION:
In an assigned area or cell, under general supervision perform complex polishing and finishing operations of exacting tolerance on production or overhaul and repair parts. Parts are typically at or near final stages of the manufacturing process, with tight tolerance limits, requiring intense period of concentration for extended periods of time.
TYPICAL DUTIES:
- Work from drawings, sketches, computer-generated information and verbal instructions to plan the polishing, finishing or re-work operation to be performed.
- Must be capable of following standard finishing applications in order to achieve dimensional integrity and required finish characteristics.
- Must have comprehensive understanding of the material characteristics being worked on in order to determine the appropriate wheel, grit, compound or abrasive texture to use in order to achieve desired finish and dimension.
- Perform precise chamfering operations on parts, without damaging other critical part dimensions
- Work from quality review and corrective work documents to repair or rework parts.
- Use precision measuring instruments in order to gage various critical dimension and tolerance limits, in accordance with established parameters or blue print requirements.
- Performs temporary part marking and In process transfer marking operations using Vibro Engraving, Electro-chemical Etch, or Ink Stamp, methods with suitable legibility to meet drawing or customer specification requirements
- Actively participate in various aspects of Lean production and Continuous Improvement projects that drive efficiency improvements.
- Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
- Refer difficulties to leader or supervisor as appropriate.
- May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
Position Requirements
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Manufacturing
Req Number
MAN-26-00001
Position
Finishing Specialist B
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Final Inspection Apprentice
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The Final Inspection Apprentice position is primarily responsible for inspecting and recording dimensions of aerospace components per process sheets, Inspection reports, Blueprints and applicable specifications utilizing specified gages and methods to ensure the quality requirements are met prior to presenting the final aerospace component to the customers.
Responsibilities:
- Review all raw material and processing certifications IAW Customer and PO requirements.
- Utilize Material Release database to document quality review/activities.
- Visual and dimensional verification (inspection) to requirements utilizing: micrometers, calipers, bore gages, thread gages, and other inspection equipment as required.
- Review and acceptance of Travelers to assure all sign-off complete and revision levels are to Operation Book Requirements.
- Presentation of inspected/received parts to various customer representatives and the resolution to any customer questions or concerns.
- Initiation of Discrepancy Reports, internal and external for products not meeting drawing requirements.
- Perform tasks as assigned by Supervisor and/or Team Leader.
Physical Requirements:
- Ability to lift 50 lbs.
- Ability to stand or sit for extended period of time.
- Fine motor skills with frequent hand and arm movement.
- Frequent twisting and bending.
Unusual Environmental Conditions:
- Loud machining environment; exposure to aerospace metals, lubricants, and chemicals.
Required Personal Protective Equipment:
- Safety glasses/shields, appropriate manufacturing closed toed footwear, hearing protection may be required or other protective equipment as needed.
Qualifications - Required
- US Citizen
- High School Diploma or equivalent
- Minimum of 1 Year of Aerospace Inspection Experience
- Familiar with ISO / AS9100 requirements and/or Auditing Skills
- Basic math or industrial mathematics desired.
- Good written and verbal skills
- Basic computer skills
- Strong attention to detail and accuracy
- Strong problem-solving skills required
- Strong organizational skills required
Position Requirements
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Quality Control
Req Number
QUA-25-00034
Position
Final Inspection Apprentice
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
