Integrity Box Jobs in Usa

• 
  
• Design / Engineering
  
  • 
    
  • Generate design documents for SCADA/Automation projects
    
    • 
      
    • Develop design document narratives
      
    • Perform requirements analysis
      
    • Generate Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical engineering and 5-7 years field experience
  
• Associate degree in the electrical field and 10 years field experience
  
• High school diploma and 15 years field experience
  
• 5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• Must be a US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

Overview
Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech
Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values
Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:
1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

The Electrical Integrator L2 will provide technical support to program managers, project directors, task leads, and senior-level Electrical Integrators. The Electrical Integrator L2 will help with mid-level troubleshooting, repair, and maintenance of electrical cables, circuits, and assemblies.

This position will interact on a consistent basis with: faculty and staff project/task leaders, technical leads, contractors, and vendors

This position typically will advise and counsel: faculty and staff project/task leaders, technical leads, contractors, and vendors

This position will supervise: N/A

Job Duty 1 -
Support program managers, project directors, and task leads with mid-level electrical assembly work such as cable assembly fabrication, and electrical chassis fabrication and assembly

Job Duty 2 -
Help with mid-level testing and troubleshooting of circuits and systems

Job Duty 3 -
Provide intermediate levels of maintenance and repair of printed circuit boards and printed circuit board assemblies

Job Duty 4 -
Assist with kitting parts using a Bill of Materials or other online inventory tools; help provide data entry for online inventory tools

Job Duty 5 -
Support other work teams, as needed, with skills such as mechanical assembly, welding, metal work, drafting, parts inventory, and technical documentation

Job Duty 6 -
Provide guidance to more junior-level technicians

Job Duty 7 -
Perform other job-related duties as assigned

Educational Requirements
Technical Diploma, Associate's Degree, or two years college course work, or an equivalent combination of education and experience

Required Experience
Two to five years of job-related experience

Preferred Experience
IPC-610
IPC-620
J-STD-001
IPC-7711
IPC-7721

ABILITIES
Experience using crimping tools preferred

KNOWLEDGE
Familiarity with hand tools and a basic understanding of AC/DC circuits; a basic understanding of RF cables and build processes preferred

SKILLS
Basic skills in PCB assembly, electrical assembly wiring, and soldering preferred

The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The University is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and University policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of race, ethnicity, ancestry, color, religion, sex (including pregnancy), sexual orientation, gender identity, gender expression, national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. This prohibition applies to faculty, staff, students, and all other members of the Georgia Tech community, including affiliates, invitees, and guests. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

More information on these policies can be found here: policymanual/section6/c2714 Board of Regents Policy Manual | University System of Georgia ( ).

This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel.
This position does require the ability to obtain and maintain a security clearance.
This position is located in Atlanta, GA
Salary Job Grade A11
Recruiting Range: $ $23.99 to $32.62 based on experience

Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening.

Overview
Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech
Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values

Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:
1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

The Electrical Integrator L1 will provide technical support to program managers, project directors, task leads, and senior-level Electrical Integrators. The Electrical Integrator L1 will help with basic troubleshooting, repair, and maintenance of electrical cables, circuits, and assemblies.

This position will interact on a consistent basis with: faculty and staff project/task leaders, technical leads, contractors, and vendors

This position typically will advise and counsel: faculty and staff project/task leaders, technical leads, contractors, and vendors

This position will supervise: N/A

Job Duty 1 -
Support program managers, project directors, and task leads with basic electrical assembly work such as cable assembly fabrication, and electrical chassis fabrication and assembly

Job Duty 2 -
Assist with basic testing and troubleshooting of circuits and systems

Job Duty 3 -
Assist with kitting parts using a Bill of Materials or other online inventory tools

Job Duty 4 -
Support other work teams, as needed, with skills such as mechanical assembly, welding, metal work, drafting, parts inventory, and technical documentation

Job Duty 5 -
Perform other job-related duties as assigned

Educational Requirements
Technical Diploma, Associate's Degree, or two years college course work, or an equivalent combination of education and experience

Required Experience
Up to two years of job-related experience

Preferred Experience
IPC-610
IPC-620
J-STD-001
IPC-7711
IPC-7721

Experience with inventory control and management of electrical and mechanical components.

ABILITIES
Experience using crimping tools preferred

KNOWLEDGE
Basic understanding of AC/DC circuits, and familiarity with basic hand tools

SKILLS
Basic skills in PCB assembly, electrical assembly wiring, and soldering preferred

The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia (USG) and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individuals race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel.
This position does not require security clearance.
This position is located in Atlanta, GA
Salary Job Grade S4
Recruiting Range: $20.01 to $27.22

Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening.

Open date: November 7, 2025

Most recent review date: Saturday, Nov 22, 2025 at 11:59pm (Pacific Time)

Applications received after this date will be reviewed by the search committee if the position has not yet been filled.

Final date: Friday, Nov 6, 2026 at 11:59pm (Pacific Time)

Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.

The Department of Integrative Biology (IB) at UC Berkeley invites applications for a pool of non-tenure track Lecturer positions to teach Integrative Biology courses and General Biology (BIO 1B) courses as need arises. Our department's emphasis is on organismal biology.

Teaching Responsibilities

We are seeking outstanding lecturers who can teach/co-teach small, medium, and large size lecture and/or laboratory courses in the broad subject areas listed below:

* Ecology

* Evolution

* Organismal Biology

* Human Biology

* General Biology (BIO 1B)

* A detailed list of all courses are located online (please see below for links to our undergraduate and graduate courses).

General Duties

In addition to teaching responsibilities, general duties include holding office hours, creating and grading quizzes and/or exams, managing and assigning grades, advising students, preparing course materials (e.g., syllabus), and using a learning management system (e.g., bCourses at UC Berkeley, Blackboard, Canvas, etc.). For courses with discussion or lab sections, duties may include supervision, training and coordination of Graduate Student Instructors (GSIs).

For General Biology (BIO 1B) Lab Courses: The laboratory class currently covers three major sections: Evolution, Ecology, and Plant Biology/Organismal Diversity. Exercises include investigations into population genetics, phylogenetic relationships, macroevolution, bioindicators, and structure and function of organisms. BIO 1B is a gateway course to the major field of Integrative Biology that consists of three one-hour lectures and one four-hour combined discussion and lab each week. Lecturers will be required to lead one discussion and lab per week, create assignments, grade assignments, attend a Friday instructional meeting, be familiar with lecture, proctor exams, hold office hours and complete other instructional duties as assigned. Senior lecturers mentor new hires and GSIs.

Undergraduate Courses: undergrad/courses

Graduate Courses:

Enrolled in Ph.D., M.D., or equivalent international degree-granting program at the time of application.

Lecturer Courses: A Ph.D. or M.D. (or equivalent international degree) is required to teach a lecture course by the time of hire.

Familiarity with a web-based learning management system (e.g., Canvas) for grading and classroom management is preferred, as well as experience teaching a college-level course in the biological sciences (for example, previously employed as a graduate student instructor, teaching assistant, lecturer, or similar).

For General Biology (BIO 1B): Experience working with computer-based phylogenetic programs and teaching a class similar to UC Berkeley's BIO 1B lab courses is preferred.

A Ph.D., M.D., (or equivalent international degree) in the biological sciences is preferred.

• Curriculum Vitae - Your C.V. should include teaching experience with a listing of dates, courses, units, titles (Lecturer, Graduate Student Instructor/Teaching Assistant, Guest Lecturer, etc.). If you were not the full-time instructor, please indicate the percentage of contribution as a co-instructor or guest lecturer.

  
  

• Cover Letter - Review Integrative Biology (IB) courses we offer (academics/courses) and please include career highlights in the cover letter that specifically address your experience for the IB or Bio 1B courses you wish to teach. Courses other than those listed on the IB website are less likely to be taught, but may be considered.
  
  (Optional)

  
  

• Statement of Teaching - Three page maximum
  
  (Optional)

  
  

• 3 required (contact information only)

Help contact:

UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.

The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.

For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.

In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.

As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.

Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.

As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.

• 
  
• "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
  
• UC Sexual Violence and Sexual Harassment Policy
  
• UC Anti-Discrimination Policy
  
• APM - 035: Affirmative Action and Nondiscrimination in Employment
  

About this Position:

Job Title: CJIS Integration Architect

Daily/Weekly expectations:

• Design/develop workflows meeting the needs of determined project requirements.
• Deliver weekly project progress for supervisor review by Thursday of each work week.
• Analyze and correct technical issues as found, providing weekly status updates.
• Evaluate and recommend alternative application workflow solutions.
• Maintain and communicate status of work performed bi-weekly at minimum.

Minimum Qualifications:

• Minimum two (2) years’ experience in development relating to criminal justice integrations with IJIS.
• Minimum eight (8) years’ experience in each of the following:
• IJIS Data Integration Development.
• Court/Law Enforcement Application or Database Support.
• MS SQL (mySQL / PL/SQL / Stored Procedures).
• IT Project management experience in a criminal justice environment.
• Pass a stringent criminal background check. (May take up to 8 weeks).

Preferred Skills:

• Development of integrations with Tyler Odyssey CMS or Equivant CourtView CMS.
• Data Exchange work utilizing the GJXDM standard.
• Proficient command of written and spoken English. Demonstrate fluency in both oral and written communications.

"No phone calls please."

"We are an equal opportunity employer and do not discriminate based on race, color, religion, gender, sexual orientation, national origin, age, disability, citizenship or any protected status."

Key Responsibilities:

• Responsible for developing and executing integration strategies, managing timelines, and ensuring that the combined entity achieves its intended value and operational goals.
• Participate in valuation and execution of M&A transactions, including financial modeling, due diligence, deal structuring, and negotiation.
• Collaborate with senior leadership to identify strategic growth opportunities, including acquisitions, joint ventures, and partnerships.
• Conduct detailed industry and market research to assess competitive landscapes and target companies.
• Prepare comprehensive reports and presentations for internal and external stakeholders, including the executive team and board members.
• Manage all stages of the deal process, from initial outreach through post-transaction integration.
• Build and maintain relationships with cross-functional teams such as Legal, HR, and Finance to enable smooth due diligence processes and successful integration of acquired companies.
• Build and maintain relationships with investment banks, private equity firms, and other key stakeholders.
• Assist in the preparation of materials for board meetings and investor presentations.

Qualifications:

• 3-5 years of experience in Investment Banking, Private Equity, or Corporate Development, ideally as an Associate or Analyst.
• Strong integration experience
• Strong financial modeling, valuation, and analytical skills.
• Proven experience in M&A transactions and corporate strategy.
• Excellent communication and presentation skills, with the ability to interact with C-level executives and board members.
• High proficiency in Microsoft Excel, PowerPoint, and other financial tools.
• Bachelor’s degree in finance, Economics, or related field. MBA or CFA preferred.

Personal Attributes:

• Strong attention to detail and ability to work in a fast-paced, dynamic environment.
• Results-driven with a strong sense of ownership and accountability.
• Excellent problem-solving skills and the ability to think strategically.
• Team player with the ability to build collaborative relationships across departments

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Company has an exciting opportunity for a F/A-18E/F and EA-18G Mission Systems Integration Manager to join Boeing Defense, Space & Security (BDS) in Berkeley, Missouri.

BDS is a global leader in the development, production, maintenance and enhancement of fixed-wing and rotary wing aircraft, commercial and government satellites, human spaceflight programs and weapons. Key markets include aeronautics, space and weapons. Core capabilities are in development, production and mission enabling upgrades of integrated solutions. BDS delivers the most digitally advanced, simply and efficiently produced and intelligently supported solutions to its customers.

The candidate will enable the Mission Systems organization to continue to expand its business base and will participate in advancing fighter aircraft technology by leading an Integration, Analysis and System Test Engineering team. The team is responsible for developing system/subsystem requirements, participating with Software engineers with real-time Operational Flight Program (OFP) development, subsystem/system testing, and evaluating system performance in Flight Test. Simulation and modeling is utilized to assist in requirements development, software development and offsets some Flight Test verification.

Position Responsibilities:

• Ensure that the team delivers safe and high-quality program products within cost and schedule
• Coordination with program management, suppliers, customers and other Boeing teams
• Provide technical, programmatic and process leadership to team members
• Monitor team and supplier performance to ensure proper system integration and compliance with requirements
• Support production with issue resolution for delivered hardware and software over the entire product lifecycle
• Perform managerial HR functions
• Lead, develop, and motivate employees

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. A small amount of Travel will be required.

This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active).

• A final U.S. Secret Clearance Pre-Start is required.

Basic Qualifications (Required Skill/Experience):

• Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry
• 9+ years of work-related experience with a Bachelor's or 7+ years of work-related experience with a Masters or PhD
• 7+ years of technical engineering experience
• 5+ years of experience in the Mission Systems field on military aircraft
• 5+ years of experience leading or managing teams and/or projects

Preferred Qualifications (Desired Skills/Experience):

• With the above Bachelor degree, also have an MBA or equivalent degree
• Strong collaboration and coordination skills
• Excellent written and verbal communication skills
• Experience delivering presentations
• Experience with Earned Value Management
• Experience mentoring engineers and less-experienced managers
• Working knowledge of Scale Agile Framework (SAFe)
• Active Top-Secret Security Clearance
• Experience with Model Based Systems Engineering
• Familiarity with tools such as Jira, Confluence, GitLab and Jama Connect

Conflict of Interest:

Successful candidates for this job must satisfy Company's Conflict of Interest (COI) assessment process.

Typical Education:

Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Relocation: choose one below

This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

This position is for 1st shift

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

Boeing offers a comprehensive benefits package including generous Paid Time Off (PTO), flexible work environment, paid parental leave, 401k matching, extremely generous tuition assistance for earning advanced degrees, and paid medical leave programs.

Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range:

Manager Level: $170,000 - $230,000

Applications for this position will be accepted until Mar. 23, 2026

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

BGS is seeking a Computer Hardware and Integration Engineer within Government Training Engineering (GTE) in Hazelwood, MO or Oklahoma City, OK. The GTE Hardware Design team is responsible for the design and development of aircrew & maintenance training devices.

A successful candidate will have the ability to maintain and evolve computing standards, support hardware design and integration for onboard computer systems, crew station I/O, networking, video processing, and cockpit displays, and serve as a centralized technical resource for computer-related issues across programs. This role coordinates with suppliers on new designs and obsolescence management, supports acquisition and production engineering activities, and acts as the subject matter expert for computational systems used across all GTE training platforms. The successful candidate will drive common solutions across programs, capture and share lessons learned, and contribute to continuous process and product improvement.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at the Hazelwood, MO facility or the Oklahoma City, OK facility.

Position Responsibilities:

• Maintain and evolve computing standards and standard computer drawings; research and recommend new computers and related products
• Coordinate computer definition, acquisition, supplier engagement, and obsolescence management
• Support hardware design and integration for computers, crew station I/O, networking, video processing, and cockpit displays
• Serve as the technical subject matter expert for computer issues, lessons learned, and cross-program problem resolution
• Use supply chain and production tools to track acquisitions, monitor/resolve nonconformance reports (NCR), and manage production/excess parts
• Support production engineering and contribute to process improvement initiatives within GTE

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. S 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.

The Employer will not sponsor applicants for employment visa status.

Basic Qualifications (Required Skills/Experience):

• Bachelor's degree in Computer Engineering, Electrical Engineering, or related field (or equivalent experience)
• 10+ years' related work experience or an equivalent combination of technical education and experience in computing architecture
• Proficient with Microsoft office and tools

Preferred Qualifications (Desired Skills/Experience):

• Deep understanding of computer architecture design enabling you to identify production improvements, reduce rework, and provide actionable recommendations that influence early product design decisions
• Strong grasp of design principles and techniques, including drafting standards, and drawing best practices, to ensure clear, unambiguous documentation and consistent interpretation across teams
• Broad familiarity with multiple engineering disciplines (electrical, mechanical, and systems) allowing you to interpret cross-discipline requirements, anticipate integration issues, and communicate effectively with subject-matter experts
• Detail-oriented proactive problem solver with a systems-level view
• Ability to synthesize technical issues and drive practical, compliant solutions across engineering, manufacturing, quality, and materials teams

Relocation:

This position does offer relocation, depending on candidate eligibility.

Shift:

This position is for 1st shift.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria are met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range (dependent upon location): 127,500 – 185,150

Applications for this position will be accepted until Mar. 20, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.