Install Arch Linux With Btrfs Jobs in Usa

Overview:

For more than 40 years, Sunrise Landscape, a commercial landscape maintenance, design, and installation company, has been serving Florida with a commitment to service excellence. They have an opportunity for an experienced multi-market landscape leader to join the team. Although the role will direct the landscape construction and installation sectors of the business across the Tampa and Ft. Myers markets, we are seeking someone with experience in either maintenance or installation. This role has full accountability for project execution, financial performance, safety, and growth of the installation division, including complex commercial and residential landscape construction projects.

In this role, you will oversee all aspects of the installation lifecycle—from pre-construction planning and estimating through project execution, close-out, and warranty—while ensuring projects are delivered on time, on budget, and to design and quality standards. This position plays a critical role in driving profitable growth, professionalizing construction operations, and scaling the installation business organically and through acquisitions.

The ideal candidate is an experienced landscape leader with broad landscape knowledge as well as excellent business acumen and team leadership skills.

Key Responsibilities:

Financial & Business Performance

• Own and deliver installation division financial results, including revenue growth, gross margin, project profitability, and cash flow.
• Maintain full P&L responsibility for the Tampa and Ft. Myers installation operations.
• Establish annual budgets, forecasts, and production plans aligned with company goals.
• Analyze project financials, job cost reports, and margin performance to identify risks and improvement opportunities.
• Ensure accurate estimating, cost tracking, change order management, and billing processes.

Project & Construction Management

• Oversee all landscape installation and construction projects from pre-construction through completion.
• Ensure project plans, schedules, and scopes are clearly defined, resourced, and executed.
• Review and approve project schedules, work plans, and sequencing to ensure efficiency and quality.
• Manage project risk, change orders, and issue resolution to protect margin and client satisfaction.
• Ensure projects are completed on time, within budget, and in accordance with approved designs and specifications.

Operations & Resource Management

• Lead daily installation operations, including crew deployment, equipment utilization, and subcontractor coordination.
• Optimize labor productivity, equipment usage, and material procurement.
• Oversee fleet, tools, and asset management to support construction activities.
• Develop standardized construction processes and best practices across markets.

People Leadership

• Lead, develop, and retain high-performing construction leaders, including Project Managers, Superintendents, Foremen, and field crews.
• Train skilled installation and construction professionals.
• Establish clear performance expectations and accountability for project delivery.
• Coach leaders on project management, financial discipline, safety, and people leadership.
• Build bench strength and succession plans for critical construction roles.

Safety, Quality & Compliance

• Champion a safety-first culture across all installation projects.
• Ensure compliance with OSHA, local, state, and federal safety regulations.
• Enforce quality standards, workmanship expectations, and inspection protocols.
• Proactively identify and mitigate project, operational, and safety risks.

Client & Stakeholder Management

• Serve as senior point of escalation for clients, developers, general contractors, and partners.
• Participate in key client meetings, project reviews, and issue resolution.
• Build long-term relationships with clients, designers, and trade partners.
• Ensure a professional, responsive, and solutions-oriented client experience.

Required Skills and Qualifications:

• 10–15 years of progressive leadership experience in landscape installation/construction or with deep landscape maintenance backgrounds.
• Bachelor’s degree in Construction Management, Landscape Architecture, Engineering, or a related field required.
• Proven experience managing complex, project-based operations with full P&L accountability.
• Deep understanding of landscape construction, project planning, scheduling, and job cost management.
• Demonstrated ability to interpret landscape designs, construction drawings, and specifications.
• Strong financial acumen, including estimating, budgeting, cost control, and margin management.
• Proven experience leading, developing, and holding landscape teams accountable.
• Excellent communication and stakeholder management skills.
• High degree of professionalism, discretion, and sound judgment.
• Experience with construction/project management software and financial systems.
• Experience operating across multiple locations or markets preferred.

Responsibilities Include:

Responsible for safety performance of job assignments and maintain good housekeeping.

Work from complicated drawings, specifications and sketches and can completely follow through on job assignments.

Install, operate test, calibrate, maintain, and repair various types of measurement and control instruments, electronic, mechanical, or pneumatic, either manual or automatic. These instruments record, indicate or control, heating value, humidity or dew point, specific gravity, temperature, combustible mixtures, flow, height, odorant, volume, liquid level, speed, weight, and time. Also included are analyzers (chemical, mechanical and electronic), telematics or remote transmission, alarms and safety devices, clocks, and regulators. Installs wells, tubing, and thermocouples.

Strong knowledge and understanding of the problems of gas measurement and control within the plants, metering stations and industrial supply runs, and can make adaptations of instruments for special jobs. Conducts all necessary test and instrument maintenance on such installations.

Strong knowledge and understanding of the problems of gas measurement and control within the plants, meeting stations and industrial supply runs, and can make adaptations of instruments for special jobs. Conducts all necessary tests and instrument maintenance on such installations.

Remove and install values/regulations4 inches and under.

Paint and install simple support for instruments and electrical equipment.

Installs simple supports and equipment.

Must possess the ability to perform all duties of a Technician and a Junior Technician.

Carry and operate radio when necessary.

Must be able to identify material needed to complete jobs as well as remove it from the storeroom.

Directly assist in the development of lower graded classification as required.

Directs lower graded classification as required.

Understand the hazards of natural gas/LNG and is experienced working on natural gas/LNG applications.

Must understand cryogenic applications.

Must make reports for all repairs, tests inspections, and calibrations of instruments.

Must qualify as an operator of plant vehicles such as trucks (dump, flat, pick-up, forklift, bobcat and loader, etc.).

Clean and prepare surface (steel, wood, etc.) for painting by washing, scrubbing, wire brushing, scrapping, and chipping. Apply primer and finish coating.

Clean equipment, check oil, gas and water levels. Reports and defective parts that may need repairs on plant vehicles.

May have the ability to operate all mill workshop tools, band saw, chop box, table saw etc.

Must be able to assist in opening and closing hand valves.

Craft Specialty Work

Service and repair DCS equipment.

Calibrate and troubleshoot instruments loops.

Service analyzer and recording instruments.

Check and maintain combustible gas indicators.

Check and maintain plant odorization system

Maintain water and CO2 analyzers.

Install, set up and calibrate new devices.

Set-up, program and install plant transmitter as needed or required.

Maintain M&R station valves and regulations.

Operate various test equipment and plant system.

Check and maintain Scott freedom oxygen detectors plant wide.

Install, set-up and program Moore site-programmable volt and milliamp limit trip alarms.

Set-up and install chart recorders.

Maintain Sensit Gold Gas Detector, calibrate and repair.

Maintain manual loading stations.

Install and maintain Hazardous Detection System components.

Install, program and set-up smart process control instrumentation.

Note: Only those trained or certified in the following craft specialties may perform these tasks.

General:

Safety is the responsibility of everyone.

Safe driving is the responsibility of everyone.

Future technological advancements in computing monitoring, and date recording do not change essential functions of the job description unless the technological advancements are deemed substantial and increase the workload.

Must maintain current TWIC {Transportation Worker Identification Credential).

Must be current with OQ (Operator Qualification) to perform job duties and remain in compliance.

Able to work in inclement weather and general gas plant conditions.

Must be able to work in confined spaces when required.

Must be able to climb ladders/stairs and work at extreme heights when required.

Must be able to don/doff a full-face respirator when required.

Must be always clean shaven (PGW Respirator Readiness policy 007-10).

Must wear PPE (FR clothing, steel/composite toe work boots - no sneaker type, hard hat, safety glasses etc.-when required.

Must possess high reach, forklift, rigging and signaling training etc.

Must be knowledgeable of the Plant’s Emergency Alarm System.

Must be able to work extended hours and shifts if conditions are required.

Qualifications:

High School Diploma/GED required.

Must possess and maintain a valid driver's license.

Must acquire and maintain a CDL License.

Certified Control Technician by the International Society of Automation {ISA) or similar preferred.

Promotion to this position requires demonstrated ability to perform the job functions. Must pass a written test and (Hands on Test).

This is a drug testing position.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.  

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities: 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards: 

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. 

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee 

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. 

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.  Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications:  

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:  

High school graduate or GED preferred. 

Relocation: 

This position offers relocation based on candidate eligibility. 

Drug Free Workplace: 

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Union Representation Statement:  

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. 

Shift:  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency: 

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.    

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.    

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations.    

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Are you an experienced leader in Distributed Antenna Systems (DAS) installation, ready to take on large-scale projects and mentor a team? As a Lead DAS Installer, you'll lead the charge in implementing wireless solutions for in-building distributed antenna systems. You’ll oversee a crew of 3-5 installers, ensuring the highest quality standards are met on every job site. This is a hands-on role, working closely with the Project Manager and installation teams to deliver seamless wireless coverage.

Your expertise will help guide the team in reading blueprints, installing DAS equipment, and configuring advanced systems. This is an exciting opportunity for a motivated leader who enjoys working in dynamic environments across the country.

Key Responsibilities:

• Lead Installation Crews: Oversee installation teams, providing guidance, training, and mentorship to 3-5 technicians throughout the project lifecycle.
• DAS Equipment Installation: Install outdoor and indoor antennas, coaxial cables, CATV, fiber optic cables, CAT 5/6, and DC power cables to NEC standards.
• Cabling & Testing: Perform advanced cable terminations, including coaxial (JMA, Andrews, Trilogy), fiber fusion splicing, OTDR testing, and coaxial PIM/Sweep testing.
• System Configuration & Integration: Configure and integrate DAS head-end systems such as Rectifiers, Battery Systems, VoltServer, Commscope iON-B and iON-U, JMA Teko, and Corning Mobile Access. Manage monitoring systems including T1, broadband backhaul, routers, and dry contact alarms.
• Project Reporting & Communication: Keep both the company and clients informed about project progress, safety standards, and local codes. Update and maintain project documentation, customer prints, and site reports.
• Site Surveys & RF Design: Conduct site surveys to troubleshoot and optimize RF/fiber optic installations, report findings, and design corrective solutions for inadequate coverage.
• Assist in Project Preparation: Help in proposal development, project scheduling, and materials/subcontractor selection processes.
• Warehouse Support: Assist with warehouse maintenance, inventory management, and ensuring adequate materials for upcoming projects.

Minimum Qualifications:

• Experience:
• A minimum of 5 years of in-building DAS installation experience.
• Extensive experience with cable installation in IT, RF, electrical, and/or telecommunications fields.
• Expertise in fiber fusion splicing, terminations, dressing, cleaning, and OTDR testing.
• Proven ability in RF Sweep and PIM measurements.
• Solid understanding of wireless networks, including modulation techniques (UTMS, GSM, LTE), amplifier/antenna/cable theory, link budgets, and propagation tools.
• Experience using RF test equipment (spectrum analyzers, sweep, and PIM gear).
• Technical Proficiency: Demonstrated ability to read and interpret construction blueprints and design drawings.
• Management Skills: Previous experience as a Field Supervisor, with a proven track record of managing and mentoring less experienced technicians.
• Software Skills: Proficiency in Microsoft Office, particularly Excel.

Additional Requirements:

• Travel: Ability to travel nationwide for project deployments lasting 4-6 weeks, with short breaks in between. Travel constitutes over 60% of the role.
• Driver’s License: Must possess a valid driver’s license.
• Physical Requirements:
• Ability to lift up to 80 lbs. unassisted.
• Repeatedly ascend and descend ladders (6ft-14ft).
• Work in tight, confined spaces, such as attics and drop ceilings.
• Walk continuously across the job site while carrying ladders, tools, and materials.
• Ability to work in varied conditions, both indoor and outdoor (hot and cold).
• Tools: Must provide basic hand tools.
• Compliance: Must pass a criminal background check, drug screening, and pre-employment physical.

Preferred Certifications (Training provided if needed):

• RF Awareness
• OSHA 10 or OSHA 30
• EXFO Splice/Test OTDR/iOLM
• Anritsu PIM & Sweep
• JMA (Connectors & TEKO DAS)
• Ericsson RDS Structured Cabling Installation
• SOLiD, Commscope – Ion-M, Ion-B, Ion-U, Ion-E
• Corning Mobile Access – CMA & SpiderCloud
• First Aid/CPR, UL Lockout/Tagout

What We Offer:

• Competitive Pay: $34.00 - $41.00 per hour.
• Comprehensive Benefits: Health insurance, paid holidays, paid vacation, life insurance, and paid training.
• Growth Opportunities: Company-paid professional development and certification programs to keep you ahead in the industry.
• Travel Perks: We provide transportation to and from project sites and per diem while working on-site.
• Tools Provided: All additional tools needed for the job are supplied by the company.

Ready to Lead?

If you’re a seasoned DAS Installer ready to take on leadership, we want to hear from you! Bring your expertise and drive to a team that values professionalism, integrity, and teamwork.

Job Type: Full-time

Benefits:

• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Paid training
• Professional development assistance
• Vision insurance

Education:

• High school or equivalent (Preferred)

Experience:

• In-building DAS: 3 years (Preferred)

License/Certification:

• Driver's License (Required)

Work Location: On the road

Job Title: Field Superintendent New Installations

Location: Charlotte, NC, United States

Job ID: 87246

We Elevate... Quality of urban life

Our elevators, escalators, and moving walks safely transport more than two billion of us up and down buildings and across transportation hubs every day. As part of the Schindler team, you’ll discover meaningful work that enhances quality of life for communities, and contribute to making places more accessible, inclusive, and sustainable for all. By joining us, you don’t just become part of our success story; you help shape the future and continue our rich legacy that started back in 1874.

Join us as a Field Superintendent New Installations

Your main responsibilities

PRIMARY FUNCTION / POSITION OVERVIEW:

Field Supt is responsible of the repair of all assigned units so as to conform to customer and Company requirements as related to quality improvement, safety, cost improvement and customer satisfaction in support of Region objectives. Is also responsible for employee selection, training and safety for all assigned projects.

ESSENTIAL FUNCTIONS:

The qualified candidate must be a high-energy self-starter with a strong work ethic. This individual will need to be motivated by a competitive industry and be results, detail and team-oriented. As a Schindler NI Field Superintendent, the candidate’s role will include providing technical solutions, ensuring workplace safety, supervising technicians and job site activity, and supporting new installation and modernization sales. The selected candidate must be an expert at fulfilling customer requirements and maximizing profitability; excellent communication, financial acumen, business development, and management skills will all be critical to success in this role. The NI Field Superintendent must also have the necessary skills and experience to handle customer concerns, adjust manpower levels according to business needs, and to teach employees the Company’s quality, productivity and safety methodology.

Additional responsibilities include:

• Build a team environment by leading field technicians

• Manage training and development of field technicians on established processes, safety, tools and standards through daily communication and job-site visitation.

• Foster excellent communication among team members while maintaining good working relationships with the local union

• Ensure that each installation project meets Company quality and safety standards, as well as all contract requirements.

• Monitor project installation progress completion and drive installation efficiency through daily job-site visitation for progress reporting.

• Perform project installation surveys which includes walking multiple flights of stairs for accessing motor rooms, pits and shaftways.

• Perform daily job-site readiness walkthroughs with general contractors prior to delivery of equipment and project installation commencement.

• Implement customer and Company requirements for quality, performance reliability and passenger safety for new installation projects.

• Support the local sales and project management team in estimating new installation bids, attending customer job progress meetings, as well as investigating and resolving customer complaints.

• Develop a spirit of teamwork and dedication to quality among all staff and field employees

• Participate in Company professional development programs to enhance working knowledge of Elevator Company products, services and procedures

What you bring

Bachelor’s degree preferred OR 3 years of technical experience in the elevator industry or related field.

• Ability to effectively manage and resolve sensitive employee relations issues

• Solid problem solving and proven negotiating skills, high sense of urgency, strong communication and interpersonal skills

• Excellent PC skills

What’s in it for you?

Fully vested 401k match, up to 7% of total eligible compensation.

Competitive Medical, Dental and Vision Plans - Effective from first day of hire.

3 weeks’ vacation which increases with tenure, 7 sick days, 3 floating holidays and 8 Company Observed Holidays.

Tuition Reimbursement - Eligible after 6 months of service.

Parental Leave – 100% base pay for 6 consecutive weeks within first year of a child’s birth or adoption.

A wide range of development opportunities to boost your professional and leadership growth.

We Elevate… Your Career

Become part of our team, help us enhance quality of life and drive innovation while raising the bar for safety and sustainability. We value your diverse skills and perspectives as together we shape the sustainable cities of today and tomorrow.

Don’t meet every single requirement? If you’re excited about this role but your experience doesn’t align perfectly with the qualifications listed in the job description, we encourage you to apply anyway! You may just be the right candidate for this or other roles!

Are you ready to embark on a new journey? Join #TeamSchindler! Our Core Values:

Safety: Uphold the highest safety standards for all.

Integrity and Trust: Foster honest, ethical relationships.

Create Value for the Customer: Deliver innovative, reliable solutions.

Quality: Ensure excellence in every product and service.

Commitment to People Development: Nurture our people, they are the heart of our success.

Discover more on our career website.

At Schindler Group we value inclusion and diversity, and practice equity to create equal opportunities for all. We endeavor that all qualified applicants will receive consideration for employment without regard to age, race, ethnic background, color, religious affiliation, union affiliation, gender, gender identity, sexual orientation, marital status, national origin, nationality, genetics and health, disability or veteran status.

Any unsolicited application from Recruitment Agencies is deemed to be rejected and does not constitute in any manner an offer from a Recruitment Agency.

Project Manager

Location: Tampa, FL (On-site with field work)

Type: Full-Time, Permanent

Salary: $80,000-90,000 (Plus $3k quarterly bonus based on performance)

Are you an organized, people-focused project leader who loves seeing projects come to life in the real world? Do you enjoy coordinating teams, juggling timelines, and making sure everything comes together seamlessly—whether it’s for a stadium, retail space, or a large commercial environment?

My client is seeking a Project Manager who will play a key role in delivering large-format graphics, signage, and branding installations across major venues and environments. You will collaborate with internal teams, field crews, and third-party partners to ensure every project is completed safely, accurately, and on schedule.

If you thrive on variety, problem‑solving, and working closely with both office and field teams, this role will feel like a perfect fit.

What You’ll Do

Manage Projects from Kickoff Through Installation

• Plan and coordinate all phases of signage and graphics projects, ensuring timelines, budgets, and scope remain aligned.
• Partner with Production, Sales, and Engineering to prepare deliverables before installation.
• Proactively identify risks and develop solutions.

Collaborate Across Teams

• Maintain consistent communication with stakeholders to ensure alignment.
• Work closely with installation teams (internal and subcontracted) to support project execution.
• Coordinate site surveys, documentation, logistics, and installation planning.

Support Field Operations

• Ensure installation crews have accurate plans, access details, and materials.
• Manage scheduling, equipment needs, and on-site issue escalation.
• Uphold quality standards and ensure finished work matches the intended design.

Champion Safety, Quality, and Process Improvements

• Promote safe work practices across all field operations.
• Maintain accurate project documentation and support project closeout.
• Identify opportunities to enhance workflows and delivery processes.

Who You Are

You enjoy being the communication hub and keeping all moving parts organized. You are resourceful, adaptable, and confident managing multiple projects simultaneously.

You bring:

• Five or more years of experience in signage, large-format graphics, construction, installation coordination, or similar project environments.
• Strong communication and collaboration skills with both field and office teams.
• Ability to read installation drawings, schedules, and technical documentation.
• Experience managing project logistics, timelines, and vendor coordination.
• Technical understanding of graphics materials, substrates, and installation practices.
• Bilingual English/Spanish is a strong plus.

Additional Details

• Valid driver’s license required.
• Ability to lift up to 50 lbs and occasionally work at heights.
• Includes both office and on-site field work; travel may be required.

What the Client Is Looking For

Based on my meeting with the hiring team, they are looking for someone who is:

• Organized, proactive, and effective at navigating fast-moving projects.
• A strong communicator who can work across departments and with clients.
• Comfortable being hands-on and present during installations.
• Aligned with core values: kindness, responsibility, customer focus, results, and enjoying the work.

Position Summary:

Harris & Bruno is seeking a highly organized and technically capable Capital Equipment Project Manager to support the delivery, installation, and demonstration of our coating and embellishment equipment for the printing industry. This role serves as the primary technical and project coordination contact for customers during machine builds, installations, and startups, while also acting as an internal resource across sales, service, engineering, production, and marketing teams. The position ensures projects remain on schedule, customers are prepared for successful installations, and demonstrations and production of samples are executed to a high standard.

Key Responsibilities:

Project Management & Coordination

• Manage projects associated with Harris & Bruno equipment, including auxiliary coating systems and full machinery platforms (ZR, ZRW, ZRX).
• Coordinate cross-functional efforts between engineering, production, service, sales, and marketing to ensure projects stay on schedule and aligned with customer requirements.
• Track project milestones, identify risks, and proactively communicate status updates internally and externally.

Customer Technical Liaison

• Serve as the primary technical point of contact for customers during pre-installation, installation, and startup phases.
• Communicate facility requirements, utility needs, and site readiness expectations to customers.
• Support customers in understanding startup materials, consumables, and operational prerequisites.

Installation & Startup Support

• Assist in planning and execution of machine installations and commissioning activities.
• Work closely with service teams to ensure smooth handoff from build to installation and support resolution of technical issues.

Internal Support & Collaboration

• Act as a technical resource for sales during pre-sales discussions and project handoff.
• Support engineering and production by clarifying customer requirements and guiding build priorities.
• Provide input to marketing on machine capabilities, applications, and customer use cases.

Demonstration Room & Applications Support

• Support operation and scheduling of the Harris & Bruno demonstration room.
• Assist with customer demos, trials, and sample production.
• Produce samples for customer evaluation, sales efforts, and marketing initiatives.
• Help maintain demo equipment readiness and documentation.

Qualifications

• Experience in project management within manufacturing, capital equipment, or industrial machinery environments.
• Strong technical aptitude with mechanical systems; printing, coating, or converting industry experience is highly preferred.
• Ability to communicate technical concepts clearly to customers and internal stakeholders.
• Strong organizational skills with the ability to manage multiple projects simultaneously.
• Comfortable working cross-functionally in a fast-paced manufacturing environment.

Preferred Skills & Attributes

• Familiarity with printing presses, coating systems, or inline converting equipment.
• Experience supporting machine installations or customer-facing technical roles.
• Strong problem-solving skills, adaptability, and attention to detail.
• Ability to balance customer-facing responsibilities with internal project coordination.

Reporting & Impact

This role works closely with sales, engineering, service, production, and marketing teams and plays a critical role in customer satisfaction, on-time delivery, and successful adoption of Harris & Bruno equipment.

Benefits Package Includes:

• Medical.
• Dental.
• Voluntary Vision.
• Company provided life insurance with the option of additional voluntary life insurance.
• 401k with employer match.
• Robust PTO policy beginning with 3 weeks earned the first year.
• Paid holidays.

About Harris & Bruno International:

H&B is a state-of-the-art manufacturing company headquartered in Roseville, CA with an established location in Germany and new location in Post Falls, Idaho with a brand-new facility. Since 1948 we have been building equipment for some of the largest names in printing, such as HP, Shutterfly, and Vistaprint. Although we are a small company, the equipment and machines we build go to every corner of the world. From the designing and engineering, fabrication, mechanical and electrical assembly, and final installation at the customers facility, we do it all.

About the Organization
RoadSafe Traffic Systems is the largest national provider of traffic safety products and services in the United States. RoadSafe serves customers in all 48 contiguous states through its network of more than 60+ branch locations. At RoadSafe, we offer competitive pay, growth potential, and an excellent benefits package, including medical, dental, vision, and 401(k) plans for those who qualify. We recognize and value diversity and are committed to creating an inclusive environment for all employees.

Position Summary:
The DOT Sign Installer is responsible for installing signs on state highways and other roadways, working either independently or as part of a sign installation control crew. This role includes setting up and maintaining safe work zones as required to ensure the safety of both the crew and the public.

Essential Functions:

• Install, remove, and maintain DOT roadway signs, posts, and related hardware.
• Ensure all installations meet DOT, MUTCD, and company safety standards.
• Assemble and install sign posts using a jackhammer and other necessary tools.
• Read and interpret blueprints, work orders, site plans, and installation specifications to ensure accurate installation.
• Operate hand and power tools, jack hammers, drills, and basic construction equipment.
• Drive the sign installation vehicle with a trailer to and from project sites and operate safely on work sites.
• Load, transport, and unload signs, posts, and materials to and from job sites
• Perform routine inspections and repairs of existing signage.
• Follow all safety protocols, including PPE and traffic control procedures.
• Maintain a clean and safe job site at all times.
• Communicate effectively with supervisors and crew members.

Education, Experience, and Skills Required:

• Previous experience installing DOT or roadway signage in sign installation or a similar trade is required; certification from ATSSA as a Worksite Traffic Technician or Supervisor is preferred.
• Must possess a valid driver's license and meet federal DOT requirements; a CDL Class B is preferred.
• Working knowledge of DOT and MUTCD standards.
• Experience using construction tools and equipment.
• Ability to work outdoors in varying weather conditions.
• Ability to understand and follow directions as provided by supervisors and project leads.
• Capability to lift and carry a minimum of 50 pounds to handle materials and equipment.

EOE Statement
RoadSafe is an Equal Opportunity Employer/including Disabled/Veterans