Information Technology Jobs in Willmington Delaware

Job Description:

• Four-Night Work Week (Dispatch between 8:00 p.m. - 2:00 a.m.)
• Weekly Minimum Guarantee of $1,450 - ($80,000 - $90,000 per year)

• Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much more
• Growth opportunities performing essential work to support Americas food distribution system
• Safe and inclusive working environment, including culture of rewards, recognition, and respect

• Attends and successfully completes PFG Entry Level Driver Trainee or Dock to Driver Training Program as required. All training documentation is completed and maintained per requirements.
• Rides-with and assists driver trainer in executing deliveries as required. Follow all instructions and directions provided by driver trainer.
• Perform all required safety checks (i.e. pre/post trip) including inspections of tractor/truck and trailer according to Department of Transportation (DOT) regulations; inspect tractor/truck and trailer to insure they meet company safety standards and take appropriate action as needed. Report all safety issues and/or repairs required.
• Follow all DOT regulations and company safe driving guidelines and policies. Immediately report any and all safety hazards.
• Inspect trailer for properly loaded and secured freight. Perform count check of items and check customer invoices of products that have been loaded. Check and complete in an accurate and in legible fashion all required paperwork associated with freight. Move tractor to the loading dock and attach preloaded trailer as needed.
• Drive to and deliver customer orders according to predetermined route delivery schedule.
• Unload products from the trailer, transport items into designated customer storage areas. Perform damage control checks on items, scanning and contact supervisor about removing orders according to company policy. Verify delivery of items with customer and obtain proper signatures. Collect money (cash or checks) where required. Load customer returns on to trailer and secure trailer doors.
• Ensure that tractor, trailer and freight are appropriately locked and/or secured at all times.
• Unload damaged goods and customer returns and bring to the driver check-in and complete necessary paperwork. Unload all equipment, materials and remove trash from trailers as required.
• Complete daily record of hours of service and enter in log in accordance with Federal DOT, state and company requirements.
• Perform general housekeeping duties in tractor, loading dock area and keep trailers clear and clean as required. At the end of the shift secure all equipment and complete all necessary paperwork.
• Performs other related duties as assigned.

Qualifications:

Company description

Awards and Accolades

BioTalent is partnering with a leading life sciences manufacturer to appoint an Associate Director, Lean Deployment, to lead and elevate the organisation’s Continuous Improvement strategy across its New Castle, Delaware operations.

This is a high-impact role responsible for driving a culture of sustainable change by developing, embedding, and championing Lean and Continuous Improvement methodologies. The successful candidate will collaborate closely with site leadership and a global continuous improvement peer network to improve manufacturing and back-office processes while shaping long-term Lean strategy and deployment.

Key Responsibilities

• Partner with site leadership to develop and execute a site-wide Continuous Improvement roadmap within the organisation’s Lean Operating System.
• Lead transformation initiatives across critical operational areas.
• Facilitate Structured Problem Solving and Value Stream Mapping to guide teams through analysis, planning, and implementation.
• Build and enhance tiered visual and daily management systems that enable effective operational oversight.
• Plan and facilitate kaizen events that drive measurable, sustainable improvements.
• Identify and eliminate waste across transactional and manufacturing processes to increase efficiency and reduce cost.
• Deliver both formal and informal training on Lean and CI tools including Daily Management, Problem Solving, 6S, SMED, Kanban, OEE, and line efficiency.
• Coach and develop employees at all levels to expand Lean capability and CI mindsets.
• Challenge existing processes to elevate performance and drive continuous, sustainable improvement.
• Support improvements across other sites or functions as needed.

Qualifications

• 10+ years of progressive experience in a manufacturing environment.
• Bachelor’s degree required; advanced degree preferred.
• Proven ability to engage leaders and shop-floor teams in Lean deployment.
• Demonstrated history of delivering sustainable results through CI initiatives.
• Practical experience in Lean Manufacturing and the deployment of a Lean Operating System.
• Strong knowledge of value stream improvement tools (e.g., SMED, 6S, Visual Management, Daily Management, standard work).
• Lean/Six Sigma Black Belt certification or equivalent preferred.
• Strong leadership presence with the ability to influence at all levels.
• Proficiency in advanced statistical and Six Sigma techniques is an advantage.
• PMP certification or similar project management credentials preferred.
• Skilled in Microsoft Office and Visio.
• Excellent communication, facilitation, coaching, and problem-solving skills.

Reach out to for more information.

Mayzon is seeking a bilingual detail-driven HR Coordinator to support our Delaware manufacturing facility. This role provides hands-on exposure across human resources administration, employee relations support, compliance management, recruiting operations, and HRIS data management in a fast-paced production environment.

If you are looking to build depth in manufacturing HR, multi-state employment compliance, timekeeping systems, workforce analytics, onboarding processes, and benefits administration, this role offers strong growth potential.

What You’ll Do

Talent Acquisition & Onboarding

• Manage full-cycle hourly recruiting support including job postings (LinkedIn, Indeed, ATS platforms)
• Coordinate interviews and candidate communication
• Prepare offer letters and onboarding documentation
• Conduct new hire orientation and complete I-9, E-Verify, and employment eligibility verification
• Support background screening and pre-employment compliance

HR Operations & Payroll Administration

• Maintain employee data integrity within HRIS (Paycom, Paylocity, or similar systems)
• Generate HR reports including headcount, turnover, attendance tracking, and workforce metrics

Compliance & Benefits Administration

• Support compliance with FLSA, FMLA, ADA, EEOC, OSHA, and state labor laws
• Assist with leave administration, workers’ compensation documentation, and return-to-work coordination
• Support open enrollment, benefits communication, and benefits data processing

Employee Relations Support

• Serve as first-line HR contact for policy interpretation and employee questions
• Support employee engagement initiatives and retention programs

Qualifications

• 1–3 years of experience in Human Resources, HR Operations, Payroll Administration, or Talent Acquisition Support
• Experience in a manufacturing, production, distribution, or industrial environment preferred
• Working knowledge of employment law compliance, wage and hour regulations, and timekeeping systems
• HRIS experience (Paycom, Paylocity, or similar)
• Strong proficiency in Microsoft Excel and data accuracy management
• Ability to manage confidential information with discretion

Compensation & Benefits

• Quarterly Bonus Program
• Blue Cross Blue Shield Medical, Dental & Vision Coverage (affordable employee contributions)
• 401(k) with Company Match — 3% employer match when you contribute 6%
• Paid Time Off & 11 Company Holidays
• Employee discounts
• Additional employee benefits

Why Mayzon?

Mayzon is a leading manufacturer of bath and home organization products sold through major national retailers and ecommerce platforms. Our fun HR team plays a critical operational role supporting plant leadership, workforce planning, employee engagement, and compliance execution in a multi-shift manufacturing environment.

Mayzon is an Equal Opportunity Employer committed to a diverse and inclusive workplace.

NEW RECRUITMENT AND RETENTION INCENTIVES! Air and Marine Operations (AMO), a component of U.S.

Customs and Border Protection (CBP) offers those with Merchant Mariner Credentials the exceptional opportunity of a career in law enforcement working with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission protecting America.

If you're looking for an exciting and rewarding job that also provides great pay, benefits, and job stability, now is the time to make your move: become a Marine Interdiction Agent .

AMO is actively seeking applicants to fill full-time security-based positions with the nation's largest law enforcement organization charged with maintaining the security of our national borders while facilitating lawful international travel and trade.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW! Salary and Benefits Begin your career as a Marine Interdiction Agent (MIA) and make up to $73,939–$96,116 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location.

Recruitment Incentive: New hires that are eligible may receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102.

Eligibility will be determined by Human Resources.) Example annual compensation for the first three years at our CAMB and subordinates new-hire locations (RUS LEAP 25% Retention Incentive).

GS-11 1st year annual pay
- $102,424 GS-12 2nd or 3rd year annual pay
- $132,931 GS-13 3rd year of annual pay
- $158,075 Example annual compensation for the first three years at our Key West, Key Largo, and Marathon, FL new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $108,431 GS-12 2nd or 3rd year annual pay
- $141,575 GS-13 3rd year of annual pay
- $168,352 Example annual compensation for the first three years at our Long Beach, CA new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $107,749 GS-12 2nd or 3rd year annual pay
- $154,974 GS-13 3rd year of annual pay
- $184,285 This career ladder position has a grade level progression of GS-11, GS-12 and GS-13.

You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52-weeks at each grade level (with supervisor approval) and any additional training, licensing, and certification requirements.

Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Recruitment Incentive (RI): Upon Entrance on Duty (EOD), you may be eligible to receive a Recruitment Incentive LEAP: Law Enforcement Availability Pay (25% Everyone) RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) Locations, Key Largo, FL, Key West, FL, Marathon, FL and Long Beach, CA)
*Retention Incentive is contingent on eligibility.

Eligibility will be determined by Human Resources Duty Locations A duty location will be offered after successful completion of the pre-employment process.

The duty location listed in the final offer letter may include any geographic location within the Southwest Region, Southeast Region or Caribbean Air and Marine Branch.

Note: Your opportunity for final selection is increased based on your flexibility to Enter on Duty at priority duty location.

Current possible duty locations include: Southeast Region: Fort Lauderdale, Miami and Marathon, FL and CAMB: Fajardo, Mayaguez, Ponce, and San Juan PR; and Saint Thomas, VI Northern Region: Bellingham, WA Limited Duty Locations as of – 1 2/1/2025 Applying to this JOA does not guarantee any of the locations listed below will still be available once you've completed the pre-employment process.

Locations are offered based on the current needs of the service at that time.

Northern Region: Port Huron, MI Southeast Region: Houma, LA Southwest Region: San Diego, CA Duties and Responsibilities As a Marine Interdiction Agent, you will perform marine-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States.

Typical duties may include: Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.

Interpreting radar data to calculate appropriate intercept while tracking vessels and people to a successful interdiction.

Searching persons, vessels, baggage, and cargo for contraband or weapons incidental to detention or arrest.

Collecting, refining, and analyzing strategic and tactical intelligence.

Qualifications This GS-11 grade level position has a selective factor: As a minimum qualification requirement all candidates must have a qualifying Merchant Mariner Credential.

See the U.S.

Coast Guard Issued Merchant Mariner Credentials (MMC) section that is listed below for qualifying capacities.

You qualify for the GS-11 grade level if you possess one (1) year of specialized experience equivalent to at least the next lower grade level, performing duties such as: Independently applying advanced skill in controlling/commanding law enforcement scenes to include conducting searches, making arrests, processing arrests and seizure of evidence and property.

Conducting investigative inquiries using various techniques, examining files and records, physical and documentary evidence to identify logical conclusions.

Utilizing cameras and other electronic high-tech surveillance equipment to gather evidence, collect, evaluate, and then preserve that physical and documentary evidence.

Highly skilled in writing comprehensive arrest, criminal and incident reports.

Assisting government or state attorneys in preparation for court cases or grand juries, testifies as a law enforcement officer in court proceedings, and administrative forums.

Considerable experience applying arrest authorities and constitutional law in various alleged criminal situations, or knowledge and experience of CBP laws, regulations, policies, legal precedent.

OR GS-11 Education Substitution for experience: A Ph.D.

or equivalent doctoral degree, three (3) full years of progressively higher-level graduate education leading to such a degree, or LL.M.

OR Combining Experience and Education: A combination of successfully completed post-bachelors' education (above) and experience.

This will be calculated using your resume and unofficial transcripts submitted with your application.

AND U.S.

Coast Guard Issued Merchant Mariner Credentials (MMC): You must submit a valid, legible copy of your Merchant Mariner Credential at time of application.

Your copies must include the expiration and capacity pages of your MMC.

Qualifying Capacities are Operator of Uninspected Passenger Vessel (OUPV), Mate of 200 gross tons or greater (Inland, Great Lakes, Near Coastal or Oceans), Chief Mate, Second Mate, and Third Mate Unlimited Oceans or Master of 25 GRT or greater (Inland, Great Lakes, Near Coastal or Oceans) OR An Accepted MMLD Application: You must submit proof an accepted MMLD application, for a MMC with a qualifying capacity, and a credential status that is in a positive standing.

It cannot be pending additional information for MMLD application process.

You must have your Official MMC Credential in hand at the time of scheduling and at assessment appointment.

NOTE: Your resume must explicitly indicate how you meet this requirement, otherwise you will be found ineligible.

Please see the "Required Documents" section below for additional resume requirements.

Other Requirements Citizenship : You must be a U.S.

Citizen to apply for this position.

Residency : You must have had primary U.S.

residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.

Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.

The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

AGE WAIVER: Creditable law enforcement officer service
- Covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d), or creditable service covered by Title 5 U.S.C.

8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement.

This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

Veterans' Preference Eligibility
- To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v.

Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C.

3312.

You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training : This position has a training requirement.

You may be required to successfully complete the training requirement as a condition of employment.

Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply Click the Apply button on this site.

You will be linked to the CBP Talent Network registration page.

For Position of Interest select Air and Marine Operations (Marine Interdiction Agent (MIA)), then complete the pre-screening questions.

You'll then receive a link(s) to the MIA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.

Be certain to review ALL details of the job opening announcement and follow all instructions in the application process.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

Position Summary 

The IT Manager oversees the company’s technology strategy, systems, and cybersecurity while coordinating with a third‑party managed IT service provider. This role ensures reliable and secure technology systems that support office staff, project management teams, and field crews. The IT Manager also manages mobile devices, construction software platforms, and technology vendors to ensure efficient operations across the organization.  

Key Responsibilities 

IT Strategy & Leadership 

• Develop and implement the company’s IT strategy aligned with operational goals. 
• Evaluate new technology solutions to improve productivity. 
• Plan infrastructure improvements that support company growth. 
• Lead digital transformation initiatives for field and office operations. 

Managed IT Vendor Coordination 

• Serve as the primary liaison with the third‑party managed IT service provider (MSP). 
• Coordinate system updates, support requests, and infrastructure changes. 
• Monitor vendor performance and ensure service level agreements are met. 
• Participate in strategic IT planning meetings with vendors. 

Construction Technology Systems 

• Set up new users on hardware as needed 
• Administer software including project management, accounting, estimating, and document control platforms. 
• Support platforms such as Procore, Accubid, Sage/Viewpoint, Spectrum Accounting, Adobe, Bluebeam, SharePoint, and AutoCAD support. 
• Assist project managers and field teams with technology tools used on projects. 

Cybersecurity Oversight 

• Work with the MSP to implement cybersecurity protections. 
• Ensure use of MFA, endpoint protection, firewall security, and backup systems. 
• Review security monitoring reports and coordinate remediation actions. 

Infrastructure & Systems Oversight 

• Coordinate maintenance of networks, cloud systems, and Microsoft 365 environments. 
• Ensure reliable connectivity between office locations and jobsites. 
• Oversee backup and disaster recovery systems. 

Mobile Devices & Field Technology 

• Manage company cell phones, tablets, laptops, and mobile hotspots. 
• Coordinate procurement, setup, and deployment of devices for employees. 
• Maintain inventory tracking for all devices. 
• Coordinate wireless carrier plans and billing. 
• Ensure devices are configured with required construction apps and communication tools. 

Technology Procurement & Asset Management 

• Manage purchasing of hardware, software, and licenses. 
• Track IT equipment lifecycle and inventory. 
• Coordinate equipment replacements and upgrades. 

Budget & Vendor Management 

• Assist leadership with annual IT budget planning. 
• Evaluate vendor contracts and pricing. 
• Identify cost‑effective technology improvements. 

Qualifications 

Education 

Bachelor’s degree in Information Technology, Computer Science, or related field preferred. 

Experience 

• 4+ years of IT experience preferred. 
• Experience working with Microsoft SharePoint. 
• Experience supporting construction or engineering firms preferred. 
• Experience with Microsoft 365, cloud infrastructure, and cybersecurity systems. 

Key Skills 

• Vendor management 
• Technology planning 
• Strong communication skills 
• Project management 
• Ability to support office and field personnel 

IT Responsibilities Matrix 

Responsibility 

Internal IT Manager 

Managed IT Provider 

Technology Strategy 

Lead 

Support 

Cybersecurity Policy 

Lead 

Implement / Monitor 

Network Infrastructure 

Oversight 

Maintain 

Help Desk Support 

Escalation / Coordination 

Primary Support 

Mobile Device Management 

Lead 

Assist 

Software Administration 

Lead 

Assist 

Backup & Disaster Recovery 

Oversight 

Maintain 

System Monitoring 

Review Reports 

Perform Monitoring 

Compensation details: 30-40 Hourly Wage

PI55c85a1b89eb-31181-38986916

Apply today and embark on an exciting career with a Fortune 500 firm in Investment Banking!

12 Month Contract

Position Overview

We are seeking a detail-oriented and collaborative UAT Analyst / QA to support User Acceptance Testing efforts across multiple applications and products. This role is responsible for executing UAT test scenarios, validating business requirements, documenting test results and defects, and partnering closely with business and technology stakeholders to ensure high-quality releases.

The ideal candidate is a quick learner with strong communication skills, advanced SQL expertise, and hands-on experience using modern UAT/QA tools in an enterprise environment.

Key Responsibilities

• Understand and interpret business requirements to ensure accurate test coverage
• Develop, revise, and maintain UAT test cases for all in-scope applications
• Define test approaches, test plans, dependencies, and associated risks
• Execute end-to-end business scenarios in the UAT environment
• Document test case execution results and defects with clear, detailed evidence
• Reconcile and analyze test results across multiple test cycles and teams
• Collaborate with business users, developers, and stakeholders to clarify requirements and testing outcomes
• Provide regular UAT status updates to stakeholders and leadership
• Ensure all testing artifacts are properly updated, stored, and maintained
• Partner with UAT Manager/Lead to meet testing readiness and execution milestones
• Support and promote quality testing best practices across products
• Identify and implement process improvements to increase testing efficiency and effectiveness

Required Technical Skills (Must Have)

Candidates must clearly demonstrate the following skills on their resume:

• Advanced SQL (writing complex queries, validating data)
• UAT / QA testing experience
• qTest
• JIRA
• Confluence
• AWS (working knowledge)
• LLM / innovation tools exposure

Required Qualifications

• Proven experience performing User Acceptance Testing in a structured QA environment
• Strong understanding of software testing life cycle (STLC)
• Excellent written and verbal communication skills
• Ability to work collaboratively in a team-based environment
• High attention to detail with strong documentation skills
• Ability to quickly learn new systems, tools, and processes

Preferred Qualifications

• Experience supporting enterprise or financial services applications
• Exposure to cloud-based platforms and data-driven applications
• Experience working in hybrid or highly collaborative environments

Dexian is an Equal Opportunity Employer that recruits and hires qualified candidates without regard to race, religion, sex, sexual orientation, gender identity, age, national origin, ancestry, citizenship, disability, or veteran status.

This facility is seeking Certified Registered Nurse Anesthetist (CRNA) for locum tenens support as they look to fill a current need. 

Details and requirements for this opportunity:

· Available Shift Length and Scheduling Requirements: 8 and 10 hour shifts preferred

· Required Cases: General Surgery, Gastrointestinal, Lab Colonoscopy, Obstetrics, Trauma, Heads, Spine, Orthopedics, Plastics, Bariatrics

· Electronic Medical Record (EMR): Cerner 

· Care Team (and ratio) or Independent: Care team 1:4 or 1:3 

· Credentialing Timeframe: 90 days 

· License required or willing to license: Willing to license 

AMN Healthcare is a digitally enabled workforce solutions partner focused on solving the biggest challenges affecting healthcare organizations today. We offer a single-partner approach to optimize labor sources, increase operating margins, and provide technologies to expand the reach of care.

About the Company

Mayzon is a manufacturing company that specializes in the design and marketing of bath and home fashion products, including shower curtains, bath furniture, and storage solutions. Mayzon was founded in 1929 and is headquartered in New York City. The company operates through brands like Zenna Home and private label partnerships, selling products to various retailers, including home decor/improvement stores, department stores, supermarkets, and online platforms. In 2022, Mayzon was formed by merging Maytex, Zenith Home Products, and Decolin.

About the Role

The Senior Product Development Engineer – Plastics is responsible for leading the design, development, validation, and transfer of plastic injection-molded products into volume manufacturing. This role provides technical leadership across product design, material selection, tooling, mold flow analysis, supplier execution, and manufacturing readiness, ensuring products are manufacturable, cost-effective, and meet quality and performance requirements.

Responsibilities

• Serve as a core member of the Product Engineering team, providing Design for Manufacturability (DFM) input for plastic injection-molded components.
• Engineer products from concept through design transfer into volume production.
• Evaluate and approve plastic part designs, materials, and manufacturing methods.
• Review and assess tool design, mold performance, and mold flow analysis including fill, warp, pressure, and balance.
• Act as technical liaison between tooling suppliers, plastic injection molders, Product Development, Manufacturing, and Quality.
• Lead and support tool and process development, resolving technical issues in real time.
• Work directly with global tooling suppliers and injection molders to deliver robust production molds at competitive cost.
• Develop cost models for plastic components, materials, labor, and tooling to ensure product profitability.
• Support manufacturing by investigating and resolving quality, process, and performance issues.
• Drive design transfer activities, ensuring tooling, process capability, and documentation are production-ready.
• Partner with Supply Chain to evaluate supplier capacity, technical capability, and scalability to support growth.
• Introduce and evaluate advanced plastic molding technologies to support innovation and continuous improvement.

Qualifications

• Bachelor’s Degree in Plastics Engineering, Mechanical Engineering, or Manufacturing Engineering.
• 7+ years of hands-on experience in plastic injection-molded product development and design.

Required Skills

• Strong knowledge of plastic materials, molding processes, and tooling fundamentals.
• Proven experience working with mold builders, tooling suppliers, material suppliers, and manufacturing partners.
• Proficiency in SolidWorks and Microsoft Office.
• Ability to manage multiple development projects in a fast-paced manufacturing environment.
• Strong problem-solving, communication, and cross-functional collaboration skills.

Preferred Skills

• Experience with prototype development and laboratory testing.
• Knowledge of wood processing materials and equipment.
• Experience in sales-driven or consumer product manufacturing environments.

Pay range and compensation package

This position is classified as Exempt under the Fair Labor Standards Act (FLSA) and meets the criteria for the professional exemption based on advanced engineering knowledge, independent judgment, and primary duties.

Equal Opportunity Statement

The Company is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status under applicable law.

• Pioneer of Geriatric House Calls™ to older adults in their communities.
• Provide physical therapy services in a 1:1 setting to help abolish ageism.
• Drive rewarding patient outcomes.
• Facilitate clinically-excellent autonomous interventions.
• Benefit from the flexibility to create, control, and alter your treatment schedule.
• Be a part of an Interdisciplinary approach by a therapy team focused on functional outcomes.
  

• Full-time/Part-time – Salaried with benefits
• PRN/Flex – PPU (Paid Per Unit)
• H1B - Able to provide sponsorship to those who need it that are qualified
• New Grads-FOX offers a widely recognized Emerging Professionals Mentor Program!
  

• Clinical and non-clinical career growth opportunities
• Supportive Clinical Community
• Unlimited access to continuing education
• Professional Certification Reimbursement
• Access to cutting-edge technology
• Medical, Dental, Vision, 401k (for those who qualify)
  

• Valid Physical Therapy license in the state(s) of practice, or eligibility to apply
• Degree from an accredited physical therapy program
• Basic computer literacy skills
• Current CPR certification