Information Technology Jobs in Placentia, CA

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.

L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Job Title: Senior Specialist, Electrical Engineer

Job Number: 34238

Job Location: Yorba Linda, California, On Site

Job Schedule: 4/10

Clearance: Must Have the Ability to Obtain and Maintain a Department of War Security Clearance

Job Description:

As a Senior Specialist Electrical Engineer, the candidate must have experience with L band RF systems, able to work from customer requirements to derive additional requirements, define the architecture of a possible solution based on requirements, setup a requirements schema & link requirements to documents (systems/subsystem specification, hardware/RF architecture description document, etc.) and flow down applicable requirements to other groups (software, ASIC, & test) so that they can contribute to realize the end solution based on the proposed architecture. The Senior Specialist EE will also oversee the development a qualification test plan that will ensure that the architecture and solution satisfy the customer's requirements. The Senior Specialist EE will also work with subject matter experts in the areas of GPS signal processing, anti-jam signal processing, other hardware design team members, control software, and government qualification standards. As a Senior Specialist EE, the candidate is expected to understand each aspect of the technology used in the proposed solution. The assigned EE also must work with the cost account manager, program management, and project management to develop the solution within the program's budget and schedule.

Essential Functions:

• Requires solid level knowledge of Electrical Engineering low frequency and high frequency (RF) Analog and Digital circuit design.

• Experience with RF systems, ideally GPS receivers
• Able to contribute to providing innovative Electrical Engineering solutions consistent with business development plans.
• Ability to develop circuit designs, requirements, design descriptions, verification plans/procedures, customer CDRLs to meet program schedules.
• Ability to support cross functional teams for cross functional design conflict resolution, Root Cause Analysis, blank page architecture developments and design
• Ability to contribute to algorithm development, analysis, implementation, system architecture, verification, and Test with emphasis on military GPS electronics.
• Ability to contribute to execution of design, build, integration and test activities, problem resolution and verifying that the deliverable products meet all program and customer requirements.
• Ability to provide project management reports as required, support senior level and customer reviews as necessary.
• Ability to provide inputs and reviews of the engineering technical baseline as part of proposal efforts.
• Ability to interface with the program's leadership and other teams (SW, Systems, ME, and Test) on a frequent basis, conduct or participate in customer and/or program technical review presentations, and provide progress status updates on work products.
• Ability to participate or lead in the product development process including design reviews.
• 5 to 10% Travel required.
• Must have Secret Security Clearance or be able to obtain a US security clearance.

Qualifications:

• Bachelor's Degree and a minimum of 6 years of prior relevant experience.
• Graduate Degree and a minimum of 4 years of prior related experience.
• In lieu of a degree, minimum of 10 years of prior related experience.
• 3 years' experience with receiver, Antenna, or Radio design.
• Minimum 4 years' hands-on experience working on RF circuitry in Lab.
• 1 years' experience with embedded Hardware design.
• 1 years' experience with FPGA design with emphasis in digital signal processing (DSP)
• 4 years' experience demonstrating strong verbal and written skills
• Experience with design tools such as MATLAB/Simulink, P-Spice, Agilent ADS (or AWR), Schematics Capturing/PCBA Layout tools such as Altium,and Ansys HFSS
• Experience with FPGA design tools such as Xilinx ISE, Xilinx EDK, and ModelSim
• Minimum 4 years Lab experience in trouble shooting electronics in Analog and RF domain.
• Minimum 3 years of experience working with Network Analyzer, Frequency Generator, Vector Analyzer, and digital/analog scope.

• Must have Secret Security Clearance or be able to obtain a US security clearance.

Preferred Additional Skills:

• Ability to capture schematics design and PCBA Layout using modern EE CAD such as Altium or Mentor Graphics.
• Proficient in MS Office, design tools such as Simulink/MATLAB, P-Spice, Altium (Schematics Capturing & PCBA Layout), Agilent ADS (or AWR), and Ansys HFSS.
• Proficient with FPGA design methodologies.
• Proficient with High speed Analog design methodologies.
• Proficient with DO-254 design.
• Strong verbal and written communication skills.

In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is Min $106,500.00 - $197,500.00 Max. The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $92,500.00 Min - $171,500.00 Max. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

#LI-KM1

L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.

L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Job Title: Senior Specialist, Program Finance

Job Number: 34279

Job Location: Yorba Linda, CA

Schedule: 4/10: Employees work 10 hour days, 4 days a week

L3Harris' Advanced Effects (AE), provides precision electronic components, subsystems, and systems for the DOD and international allies. L3Harris' AE specializes in the design and manufacture of fuses, ignition safety devices, proximity sensors, GPS navigation systems, aerospace status indicators, and range and test solutions.

The L3Harris Interstate Electronics Corporation business was founded in 1956 and for over 65 years IEC has played a key role in the most successful defense system of modern history. With sites in Yorba Linda, CA, Cape Canaveral, FL, and Crystal City, VA, IEC is a recognized industry leader in defense and security solutions, providing critical technology advancements in the areas of GPS/Position Navigation and Timing, and Range and Test Solutions. We offer competitive benefits, an alternative 4/10 work schedule, and the opportunity to work with a talented and diverse group of professionals.

Job Description:

The Senior Specialist, Program Financial Analyst will support the project team members in the planning, tracking, analysis, and reporting of projects of varying contract type, size and complexity. The analyst will assist in generating monthly Integrated Program Management Reports (IPMR and/or IPMDAR), Quarterly Estimate at Completions (EACs), Earned Value Management and preparation of monthly forecasts outlooks for Orders, Sales, EBIT, Cash and Working Capital.

We are seeking a proactive, self-starter with the ability to work effectively in a team environment. Must possess excellent communication and interpersonal skills to be able to collaborate with key functional stakeholders. Ideal candidate must be detail oriented with good organizational skills and capable of multi-tasking and the ability to work with minimal day-to-day supervision.

Essential Functions:

• Responsible for Earned Value Management, baseline planning/execution, and estimate to complete changes
• Monitor weekly, monthly, and quarterly cost forecasts against actuals
• Perform variance analysis and support internal / external reporting requirements.
• Interface with cross-functional departments to support assigned projects and ad hoc business area requests.
• Support Integrated Baseline Reviews and close out of action items
• Support internal/external EVMS Surveillance Audits
• Detail oriented with ability to multi-task and prioritize competing demands in a fast-paced environment.
• Experience with contracts such as CPAF, CPIF, CPFF, T&M, FFP, etc.
• Makes moderate to substantial improvements to systems and processes.
• Provide guidance, coaching and training to other employees.
• Ability to work independently with minimal supervision.
• Responsible for knowing/following L3Harris policies and procedures.

Qualifications:

• Requires Bachelor's Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience.

Preferred Additional Skills:

• Experience with Deltek Cobra, Deltek Costpoint, Empower and Cognos
• Advanced Excel Skills (Macro's, Arrays, SUMIF's formulas
• Demonstrated strong working knowledge of EVMS Tools such as Cobra, Empower or wInsight and Microsoft Office applications specifically Excel and PowerPoint
• Experience with EVMS reporting including Monthly EV Processing, generating CDRLs and supporting IBRs and Surveillance reviews with DCMA Audits

In compliance with pay transparency requirements, the salary range for this role is $88,000.00 MIN - $164,000.00 MAX. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

Senior Java/Kotlin engineer
Remote
6+ Month Contract: $70-$80 per hour
Our client is in search of a Senior Java Engineer for a 6+ month contract. You will lead the development and testing of our systems and services Participate in shaping the technical architecture of the product Help translate product requirements into user stories and technical solutions Deliver highly available and scalable services in a production environment Mentor other engineers, support the technical culture, and help grow the team Generate ideas for new initiatives and technologies Communicate with project leads, product managers and other software developers

• Systems Development: Lead and participate in the development and testing of our systems and services.
• Requirement Translation: Help translate product requirements into user stories and actionable technical solutions.
• Production Delivery: Deliver highly available and scalable services in a production environment.
• Cross-Functional Collaboration: Communicate effectively with project leads, product managers, and other software developers.

• Education: Bachelor's Degree in Computer Science or a related field.
• Experience: 4+ years of programming experience, ideally using a modern stack.
• Backend Expertise: 2+ years of experience with Java or Kotlin.
• Core Stack Knowledge: Familiarity with our environment ( Java/Kotlin, Spring, PostgreSQL, React) running on Kubernetes within a service-oriented architecture (100+ services).
• Database Proficiency: A solid understanding of relational databases and ORMs.
• Architecture: Experience working on SOA or microservice-based applications.
• Quality Standards: View Unit and Integration tests as first-class citizens in the software development lifecycle.
• Collaborative Workflow: Experience refining designs, performing code reviews, and managing pull requests in a team environment.
• Ownership & Mindset: * A solid sense of responsibility and the ability to drive projects from inception to completion

• Full-Stack Experience: Additional expertise in any of the following areas:
  • Systems: Kafka, Temporal, Docker, POSIX.
  • Databases: Deep PostgreSQL knowledge.
  • Front-End: JavaScript/TypeScript, React.

We champion equality and inclusivity, proudly supporting an Equal Opportunity Employer policy. We welcome applicants regardless of Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other status protected by law.

• 
  
• Assemble, bond, and finish composite parts and subassemblies
  
• Perform secondary bonding, hardware installation, drilling, trimming, and sanding
  
• Prepare bonding surfaces and mix/apply structural adhesives per specifications
  
• Align, fit, and inspect parts to meet dimensional and tolerance requirements
  
• Follow assembly drawings, travelers, and work instructions
  
• Complete required manufacturing and quality documentation
  
• Support rework, repair, and continuous improvement activities
  
• Adhere to safety, environmental, and quality system requirements
  

• 
  
• Provide daily direction and task assignments to composite assembly personnel
  
• Serve as the primary technical resource for troubleshooting bonding and assembly issues
  
• Train and mentor technicians on proper techniques, safety practices, and quality standards
  
• Monitor workflow to ensure schedule adherence and efficiency
  
• Coordinate with production supervisors, engineering, and quality to resolve issues
  
• Promote a safe, organized, and compliant work environment
  
• Provide input on performance feedback and serve as acting supervisor when required
  

• 
  
• Ability to read and interpret engineering and assembly drawings
  
• Familiarity with hand tools, measuring equipment, and bonding tools
  
• Understanding of adhesive bonding and surface preparation techniques preferred
  
• Strong mechanical aptitude and attention to detail
  
• Ability to work safely with chemicals and adhesives
  
• Effective communication and leadership skills
  
• Strong organizational and problem-solving abilities
  

• 
  
• High school diploma or equivalent required
  
• Prior experience in composite assembly, aerospace manufacturing, or mechanical assembly preferred
  
• On-the-job training may be provided for entry-level candidates
  

• 
  
• The Patient Services Representative II PSR II represents the face of our company to patients who come in, both as part of their health routine or for insights into lifedefining health decisions.
  
• The PSR II draws quality blood samples from patients and prepares those specimens for lab testing while following established practices and procedures.
  
• The PSR II has direct contact with patients and creates an atmosphere of trust and confidence while explaining procedures to patients and drawing blood specimens in a skillful, safe and accurate manner.
  
• The PSR II will demonstrate Leadership Behaviors while focusing on process excellence skills and sensitivity to confidentiality and accuracy to patient information.
  
• Successful applicants may be assigned to a doctors office, a patient service center or as business needs dictate.
  
• Under the direction of the area supervisor, perform daily activities accurately and on time. Maintain a safe and professional environment.
  
• Performs with confidence, both the forensic and clinical specimen collection and processing duties following established practices and procedures.
  
• Perform verification of patient demographic info initials including patient signature postvenipuncture to verify tubes were labeled in their presence and that the name on the label is correct.
  
• Maintains required records and documentation.
  
• Demonstrates organizational commitment and promotes a positive image to patients, clients, employees and the public in general.
  

• 
  
• Ability to provide quality, error free work in a fastpaced environment.
  
• Ability to work independently with minimal onsite supervision.
  
• Excellent phlebotomy skills to include pediatric and geriatric.
  
• Flexible and available based on staffing needs, which includes weekends, holidays, oncall and overtime.
  
• Committed to all Policies Procedures including Company dress code, Employee Health Safety, and Everyday Excellence Guiding Principles.
  
• Must be able to make decisions based on established procedures and exercise good judgment.
  
• Must have reliable transportation, valid driver license, and clean driving record, if applicable.
  
• Travel and flexible hours required to work multiple locations and required to cover at Patient Service CenterInOffice Phlebotomy locations with minimal notice.
  
• Capable of handling multiple priorities in a highvolume setting.
  
• Must demonstrate Superior Customer Focus ability to communicate openly and transparently with peers, supervisors and patients ability to accelerate and embrace change and knowledge of our business.
  
• Training locations may vary based on trainer availability.
  

• 
  
• High school diploma or equivalent REQUIRED.
  
• Medical training: medical assistant or paramedic training preferred.
  
• Phlebotomy certification preferred. Required in California, Nevada, and Washington.
  

• 
  
• 3 years phlebotomy experience REQUIRED, inclusive of pediatric, geriatric and capillary collections.
  
• 2 years in a Patient Service Center environment preferred.
  
• Customer service in a retail or service environment STRONGLY preferred.
  
• Keyboarddata entry experience.
  

BCI has the following long-term contract open with our direct client in Orange County, CA. We are looking for a strong PM, who can run multiple projects and dive in as a BA when needed. Ability to manage Appian (or similar workflow tool) developers is a must. Will support the Investment Operations organization by leading multiple concurrent initiatives focused on process improvement, automation, and operational risk reduction. This role combines traditional project management responsibilities with hands-on business analysis, including requirements definition, process mapping, and workflow design. The ideal candidate brings deep Investment Operations experience—particularly in Corporate Actions—and has experience defining workflows in Appian while coordinating delivery across Appian developers and back-end technology teams.

Project Management Responsibilities:

• Manage multiple concurrent initiatives through all phases of the project lifecycle.

• Develop and maintain project plans, timelines, risks, and status reporting.

• Establish priorities, milestones, and success metrics in partnership with business and technology leadership.

• Proactively manage dependencies, risks, and issues across cross-functional teams.

• Communicate project status, risks, and decisions to sponsors and senior stakeholders.

Business Analysis & Appian Responsibilities:

• Serve as the primary business owner for workflows within Investment Operations.

• Partner with Investment Operations stakeholders to elicit, document, and prioritize business requirements.

• Translate complex operational processes (e.g., Corporate Actions) into functional specifications, user stories, and process models.

• Define end-to-end workflows, business rules, controls, and exception handling within Appian.

• **Act as the day-to-day delivery lead for Appian initiatives, coordinating work across Appian developers and back-end technology teams.**

• Review designs and configurations to ensure alignment with business intent, operational controls, and regulatory requirements.

• Support user acceptance testing (UAT) and validate solutions against business requirements.

Qualifications:

• Bachelor’s degree or equivalent practical experience.

• 5+ years of experience in project management and/or business analysis within a financial services environment.

• Prior experience supporting an Asset Manager or similar buy-side organization a big +.

• Knowledge of Investment Operations and Corporate Action familiarity such as Bank Loan Amendments, Restructurings, Exchanges etc. is a strong plus.

• Demonstrated experience gathering requirements and translating business processes into technology solutions.

• Experience working in a matrixed environment across business, technology, and platform.

BCI has the following long-term contract open with our direct client in Orange County, CA. We are looking for a strong PM, who can run multiple projects and dive in as a BA when needed. Ability to manage Appian (or similar workflow tool) developers is a must. Will support the Investment Operations organization by leading multiple concurrent initiatives focused on process improvement, automation, and operational risk reduction. This role combines traditional project management responsibilities with hands-on business analysis, including requirements definition, process mapping, and workflow design. The ideal candidate brings deep Investment Operations experience—particularly in Corporate Actions—and has experience defining workflows in Appian while coordinating delivery across Appian developers and back-end technology teams.

Project Management Responsibilities:

• Manage multiple concurrent initiatives through all phases of the project lifecycle.

• Develop and maintain project plans, timelines, risks, and status reporting.

• Establish priorities, milestones, and success metrics in partnership with business and technology leadership.

• Proactively manage dependencies, risks, and issues across cross-functional teams.

• Communicate project status, risks, and decisions to sponsors and senior stakeholders.

Business Analysis & Appian Responsibilities:

• Serve as the primary business owner for workflows within Investment Operations.

• Partner with Investment Operations stakeholders to elicit, document, and prioritize business requirements.

• Translate complex operational processes (e.g., Corporate Actions) into functional specifications, user stories, and process models.

• Define end-to-end workflows, business rules, controls, and exception handling within Appian.

• **Act as the day-to-day delivery lead for Appian initiatives, coordinating work across Appian developers and back-end technology teams.**

• Review designs and configurations to ensure alignment with business intent, operational controls, and regulatory requirements.

• Support user acceptance testing (UAT) and validate solutions against business requirements.

Qualifications:

• Bachelor’s degree or equivalent practical experience.

• 5+ years of experience in project management and/or business analysis within a financial services environment.

• Prior experience supporting an Asset Manager or similar buy-side organization a big +.

• Knowledge of Investment Operations and Corporate Action familiarity such as Bank Loan Amendments, Restructurings, Exchanges etc. is a strong plus.

• Demonstrated experience gathering requirements and translating business processes into technology solutions.

• Experience working in a matrixed environment across business, technology, and platform.

As a member of the Maintenance team this role is responsible for effectively troubleshooting mechanical and electrical issues on CNC equipment including aligning equipment and reading schematics. Be familiar with milling and turning equipment. This role is an hourly (non-exempt) classified position.

Pay Range: $45 to $55 per hour

• Perform mechanical repairs (and rebuild) on all machines
• Perform machine leveling and alignment on all machines
• Pull and replace machine linear guides and ball screws.
• Able to work with complex NC machine up to & including 5 Axis
• Electrical & Electronic: Diagnose, locate and correct malfunctions of electrical & electronic system such as machine controls, recorders, servo/axis drives, servo motors, defective transformers, relays, contactors, fuses, sensors, etc.
• Knowledge of OEM machine controllers (FANUC, Siemens and NIT).
• Working knowledge of tool Probing function for CNC Mill Machines
• Support with scheduling PM, reading report, diagrams and drawings
• Plan, layout, and fabricate replacement parts for major rebuilding of precision machine tools where set up and operation to exacting tolerances is required
• Plan methods required to maintain, test, repair, or modify various types of industrial electronic controls and systems.
• Analyze and coordinate resolutions of technical problems or assist when solving problems including contacts outside own department as required.
• Interface with manufacturers on line tech support when needed
• Ability to work overtime as required by Company
• Recommend improved work methods and procedures, assist in training employs
• Ability to write routine reports and correspondence
• Must adhere to all OSHA and EHS policies and all related procedures
• Perform related work as required

Minimum Qualifications

• High school diploma or General Education Degree (GED) plus 5+ years of CNC maintenance experience
• Must have solid mechanical background of maintenance experience working with CNC machines, pneumatic, hydraulic, electrical, and programmable logic controls as well as having various electrical mechanical
• Must be able to read schematics and parts drawings, perform routine preventive maintenance on machines and facilities, and be proficient with the use of a multi meter.
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
• Competence in shop math such as working with fractions and decimals.
• To perform this job successfully, an individual must have basic computer skills, MS Office program, and have ability to enter data in various software systems.

Desired Characteristics

Strong communication skills

Ability to analyze, rebuild, repair NC machinery and other types of equipment's

Excellent customer service to co-workers, customers, and vendors

Works collaboratively and respects all others

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.

Fanuc certified

Siemens certified

AS100

Training with Mori Seiki, Makino, Cincinnati Milacron, OKK, SNK and Kuraki Machines

This position is currently accepting applications.

Apply Now

The Sr Manufacturing Engineer is responsible for the technical development, oversight and improvement of manufacturing processes within the area of responsibility. This individual will lead process optimization, technical problem-solving, and cross-functional manufacturing initiatives. This role is accountable for achieving senior-level competence Plans and presents engineering program and product design reviews for compliance with engineering principles, company standards, customer contract requirements, and related specifications. Develops and requests design and specification change releases. Assesses and communicates impact of engineering initiatives to functional groups. The ideal candidate demonstrates advanced technical depth, measurable impact on production performance, and the ability to mentor mid-level and entry-level engineers while partnering with cross-functional stakeholders. This role is classified as Exempt for FLSA purposes and reports to the Engineering Manager.

Pay Range: $110,00.00 to $137,000.00 per year. Final compensation will be based on experience and qualifications.

Essential Responsibilities

• 
  
• Develop, release, and maintain detailed technical work instructions for the manufacture and repair of aerospace metallic structures and assemblies, ensuring full compliance with customer(s) engineering definition and regulatory requirements.
  
• Partner with CNC Programming group to develop and implement manufacturing plan for complex metallic machined components/assemblies.
  
• Provide advanced technical support to Quality and Operations teams to achieve site-level Safety, Cost, Quality, and Delivery (SCQD) objectives; act as a primary escalation point for complex manufacturing issues.
  
• Partner with Purchasing and Sales during the quoting process to define manufacturing approach, assess technical risk, establish labor standards, and ensure cost competitiveness.
  
• Establish and validate operational standard hours using time studies and process analysis; drive accuracy in routing and capacity planning assumptions.
  
• Review engineering drawings, specifications, and model-based definitions to ensure manufacturability; translate design requirements into controlled shop-floor documentation.
  
• Train and mentor operators and junior engineers on manufacturing methods, process controls, and quality standards; elevate overall technical capability of the team.
  
• Lead productivity and cost-reduction initiatives through Lean principles, waste elimination, and process optimization; quantify and report measurable performance improvements.
  
• Develop, validate, and industrialize manufacturing processes for new product introduction (NPI), ensuring processes meet defined capability, repeatability, and quality targets prior to production release.
  
• Evaluate nonconforming components and determine repair feasibility; develop and validate repair schemes in coordination with Engineering and Quality functions
  

The individual is required to be a supportive member of Environmental Safety & Health (ESH) and Quality System policies to provide a safe work place and eliminate conditions and behaviors which may cause work related illnesses and/or injuries while delivering quality product and services on time.

Bachelor of Science in Mechanical Engineering, Manufacturing Engineering, Chemical Engineering, Aerospace Engineering or relevant technical discipline, or HS Diploma/GED w/equivalent composite/aerospace manufacturing/repair experience. 5+ years of technical experience with composites and/or aerospace components production or repair.

Desired Characteristics

• Demonstrated experience creating, structuring, and maintaining complex multi-level Bills of Material (BOMs) for aerospace assemblies, ensuring configuration control and production readiness.
• Proven experience in the developing and implementing machining strategies of large-scale metallic aerospace structures, including fixturing for both Milling and Turning.
• Hands-on experience machining large metallic aerospace components, including process planning, tooling strategy, and dimensional validation.
• Strong proficiency in engineering drawing interpretation, including advanced Geometric Dimensioning and Tolerancing (GD&T) application and tolerance analysis.
• Working knowledge of CAD systems such as CATIA, SolidWorks, NX; ability to interrogate models to support manufacturability and tooling design decisions.
• Experience designing and validating manufacturing tooling for, including production fixtures, machining/holding fixtures and assembly aids.
• Demonstrated change management capability, including leading engineering change implementation across cross-functional teams; ability to manage risk, stakeholder alignment, and execution discipline.
• Strategic thinker capable of translating high-level engineering change initiatives into structured, tactical execution plans; analytical, data-driven, and results-oriented.
• Strong background in continuous improvement methodologies including Six Sigma, Lean Manufacturing, and ACE; proven record of measurable operational improvements.
• Excellent written and verbal communication skills with the ability to influence across organizational levels; demonstrated ability to build engagement and sustain a culture of operational excellence
• Strong familiarity with Microsoft Office products (Word, Excel, PowerPoint, etc.) required.

This position is currently accepting applications.

Apply Now

The Quality Inspector is responsible for the inspection, documentation, and certification of critical components throughout the production process, including parts subject to flight safety requirements. This role ensures compliance with AS9100, customer specifications, and regulatory requirements through precise measurement and rigorous recordkeeping.

Essential Duties & Responsibilities:

Performs various inspection activities utilizing precision inspection equipment at all phases of product manufacturing. Uses GD&T concepts, customer supplied specifications, and internal standards, to ensure compliance with AS9100, NADCAP, and other regulatory requirements.

Pay Range: $30.00 to $36.00 per hour

• 
  
• Read and understand complex engineering drawings to determine dimensions and tolerance specifications
  
• Compare recorded measurements to blueprint dimensions and tolerances and notify specified persons of discrepancies using NCF and MRB process
  
• Familiarity with the use of various inspection and measurement equipment, i.e. CMM, FARO Arm, Borescope, Optical Comparator, etc. preferred
  
• Strong understanding of units of measure and applicability to GD&T principles
  
• Must be self-motivated and able to adjust to a dynamic work environment and tempo while maintaining a high level of attention to detail.
  
• Strong professional ethics combined with the ability to function well on teams.
  

• 
  
• Experience in aerospace manufacturing or similarly regulated industry preferred.
  
• Familiarity with performing various inspection activities to include, i.e., 1st piece, in-process, final inspections
  
• High School Diploma or GED
  
• Knowledgeable of MS Word, and Excel
  
• Minimum of 3 to 5 years' experience in the operation of CMM's preferred (Mitutoyo/Metris/Zeiss)
  
• Familiarity with operation/programming of FARO arm preferred
  

This position is currently accepting applications.

Apply Now