Information Technology Jobs in Meriden, CT

The Manufacturing Engineer is responsible for optimizing the process capability of the assigned product group by developing and verifying processes, analyzing process flows, implementing performance improvements, and conducting long-term process monitoring. This role ensures that production operations meet safety, quality, cost, and delivery objectives through process improvements, technical support, and continuous improvement initiatives. The engineer acts as the technical liaison between design, production, quality, and maintenance teams to sustain and enhance product line performance.

Key Responsibilities:

Safety & Compliance:

• Ensure compliance with safety, environmental, and regulatory standards in all process designs and implementations.

Quality:

• Collaborate with Quality Assurance and implement best practices for process control.

Daily Operations:

• Ensure stable and efficient production processes to support execution of production plan.
• Train operators and supervisors on new processes, equipment, and quality standards.
• Provide technical guidance during equipment installation, qualification, and maintenance troubleshooting.

Process Standards:

• Update and maintain production standards in ERP (Standard Rates/Crewfactor)
• Develop, document, and maintain manufacturing process instructions, standard work, and operating procedures.

Process Improvement:

• Collaborate with Quality and Production teams to reduce setup times, improve cycle times and reduce scrap.
• Analyze production data to identify trends, inefficiencies, and opportunities for cost reduction and process improvement.
• Design and validate tooling, fixtures, and process layouts to ensure ergonomic and efficient operations.
• Monitor and improve key performance indicators (KPIs) such as throughput, downtime, and quality metrics.
• Participate in cross-functional continuous improvement activities, including Lean, 5S, and Six Sigma initiatives.

Problem Solving:

• Actively participate in root cause analysis and corrective and preventive actions (CAPA) for process-related issues, internal rejections, and customer complaints.

Communication:

• Foster open, cross-functional communication across all levels and departments to address opportunities and challenges within the product line.
• Support new product introductions (NPI) and engineering change implementations within the product line.

Key Metrics: (Product Line Performance Card)

Safety and Compliance

• Recordable Incident Rate: OSHA-reportable safety incidents per period.
• Near Miss Reporting: Frequency of safety risks reported before they become incidents.

Quality

• Customer complaints and/or returns: Frequency and type of product issues reported post-shipment.
• Scrap Rate: Pieces Scrapped / Pieces Produced
• Internal Rejections/Defect Rate: Issues found during process control checks.

Production Performance

• On-Time Delivery (OTD)
• Production Efficiency: Actual output vs. planned output.
• GMP (Good Manufacturing Practices)

Cost Control

• Product Line GPM Targets (Gross Profit Margin)
• Material Usage Variance: Difference between actual and expected material usage.

Continuous Improvement

• Kaizen Participation: Employee involvement in improvement activities.
• Downtime Analysis: Root cause tracking and reduction of unscheduled downtime.
• 5S or Visual Management Audits: Scores from housekeeping and organization assessments.
• Willingness to stay current with emerging technologies is Vital.

Qualifications:

• Education: Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or a related field.
• Experience: 3–7 years of experience in a manufacturing environment; experience supporting a dedicated product line is preferred.
• Capable of meeting and exceeding timelines.
• Strong knowledge of manufacturing processes, equipment, and production systems.
• Experience with Lean manufacturing, Six Sigma, and root cause analysis tools (e.g., 5 Whys, Fishbone Diagram, FMEA).
• Proficiency with CAD software (SolidWorks, AutoCAD) ERP systems.
• Understanding of GD&T, process capability (Cp, Cpk), and statistical process Control (SPC).
• Strong analytical and problem-solving abilities.
• Excellent communication and collaboration skills.
• Ability to manage multiple projects and priorities in a fast-paced environment.
• Capable of working with minimal or no supervision.
• A can-do attitude.

Join America’s leading window & door company as a Sales Consultant!

Are you a motivated, customer focused professional who thrives in a dynamic, growth driven environment? Do you love the idea of helping homeowners transform their spaces while building a rewarding career? If so, we want to meet you!

As a Sales Consultant for Esler Companies – Renewal by Andersen, you’ll be the face of our brand, meeting homeowners, showcasing our premium window and door solutions, and guiding them through an exciting home improvement journey. You’ll work directly with customers in their homes, performing professional inspections, and delivering engaging product demonstrations.

This is a fully commission-based role earning $150,000+ yearly. You will be provided with paid training including a ramp up, pre-set and pre-qualified leads, a flexible schedule, and excellent company culture. Our Top Performers earn an all-expenses-paid company trip yearly!

Responsibilities

• Deliver in‑home product demonstrations that delight prospective customers.
• Help homeowners find the right fit for their needs.
• Manage your sold projects from initial agreement through final installation and quality assurance.
• Partner with our Installation Managers to remotely measure windows using video technology.
• Build your own referral network and cultivate repeat business.
• Provide professional, respectful on‑site experiences for every customer, every time.

Qualifications

• At least 2 years of sales experience.
• Passionate about exceeding customer expectations.
• Self-motivated, results driven, and ready to win.
• A confident communicator with excellent presentation and negotiation skills.
• Tech savvy and comfortable using modern tools to support your workflow.
• Adaptable, coachable, and energized by working in a fast-paced environment.
• A valid U.S. driver’s license.
• Flexibility to meet customers during evenings and weekends.

Benefits

• Paid Training with Ramp Up
• Medical, Dental, and Vision Insurance
• Teammate Assistance Plan
• Tuition Reimbursement
• 401k with 50% match up
• Paid Volunteer Time
• And more!

Pre-Employment Requirements

Esler Companies requires applicants to successfully complete the following as part of the hiring process:

•Background Check

•Drug Screen

Empowered to be Extraordinary. We believe in our people. And that's why we empower you to develop a career path that supports your unique voice and talents.

THE ESLER COMPANIES - RENEWAL BY ANDERSEN STORY

Renewal by Andersen is the full-service window-replacement division of 120+ year-old Andersen Corporation, the owner of the most trusted family of window brands in America. RbA was founded to redefine the industry and offer a different—and better—window-replacement experience. Esler Companies is the holding company for Renewal by Andersen of Nevada, Arizona, Colorado, Oklahoma, North Texas, Central Texas, Greater Philadelphia, Southern New England and Portland, Maine, with sales and marketing engines in Northborough, Massachusetts & Austin, Texas.

We are a proud equal-opportunity employer. We are committed to fair hiring practices and to creating a welcoming environment for all team members. Esler Companies LLC is committed to maintaining a safe, healthy, and drug-free workplace for all teammates.

Please note that we participate in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Esler Companies will often use SMS to communicate with candidates. Candidates can choose to opt-out at any time.

#ZR

Posted Salary Range

USD $150,000.00 - USD $350,000.00 /Yr.

Assistant Nurse Manager - Surgical Services

• Department: Surgical Services Admin
• Hours: 40.00 per week

Position Summary

Applies the nursing process with patients and families, integrating principles that reflect sensitivity to their age-specific/developmental needs, gender, culture, religion, psychosocial and socioeconomic backgrounds in order to provide evidence-based, holistic care in a manner that respects the worth and dignity of each individual. Practices professional nursing as a registered nurse within the legal and ethical framework established by the Connecticut Nurse Practice Act and the American Nurses Association Scope and Standards for Nursing Practice and Code for Nurses.

Minimum Requirements:

Licensed as a Registered Nurse in the State of Connecticut

BSN (Bachelor's of Science in Nursing)

Previous leadership, supervisory, or charge nurse experience

Preferred Requirements:

Master's degree in Nursing, Education, or other related field

3 years' of OR RN experience

CNOR (Certified Perioperative Nurse), or certified within 1 year

Two or more years' of supervisory or management experience

Current BLS (Basic Life Support) and ACLS (Advanced Cardiovascular Life Support) certification

Comprehensive Benefits Offered

• Competitive and affordable benefits package
• Shift Differentials
• Continuing Education assistance
• Tuition reimbursement
• Student Loan relief through Fiducius
• Quick commute access from I-84, Route 9 and surrounding areas

About Middlesex Health

The Smarter Choice for your Career!

Come join one of Connecticut’s Top Workplaces, and a Magnet designated organization! At Middlesex Health, we have a unique combination of award-winning talent, world-class technology, and patient-first care that's making health care better. Through our affiliation with the Mayo Clinic Care Network, Middlesex Health has access to the most advanced medical knowledge and research available.

All of our nurses at Middlesex have access to professional development opportunities, the ability to participate in a clinical ladder, and shared governance while working to provide the safest, highest-quality care to our patients.

Patient Care Technicians (ED Tech (Middletown, Westbrook), Critical Care Unit Tech)

Full-Time and Part-Time Opportunities Available

Day, Evening and Night Shifts Available

The Smarter Choice for your Career!

Come join one of Connecticut’s Top Workplaces for a fifth year in a row, and a 6 time Magnet designated organization! At Middlesex Health, we have a unique combination of award-winning talent, world-class technology, and patient-first care that's making health care better. Through our affiliation with the Mayo Clinic Care Network, Middlesex Health has access to the most advanced medical knowledge and research available.

Minimum Qualifications:

• High school diploma, GED, or equivalent experience
• Experience in a patient care environment such as a CNA, EMT, Medical Assistant, Nursing Student, or Pre-Physician Assistant student
• Qualities of accountability, multitasking, organization and good communication skills

Preferred Qualifications:

• Hospital experience
• Certification as a nursing assistant (CNA) or Patient Care Technician (PCT)

Comprehensive Benefits Offered:

• Competitive and affordable benefits package
• Shift Differentials
• Continuing Education assistance
• Tuition reimbursement
• Student Loan relief through Fiducius
• Quick commute access from I-84, Route 9 and surrounding areas

Position Overview:

As a Grocery Replenishment Specialist/Buyer, you will be responsible for maintaining a 95% service level while achieving budgeted inventory levels and delivering optimal cost/sell margins defined as 100% accurate purchase orders. You will also be responsible for optimizing inbound performance, ensuring vendor buying parameters with maximum efficiency and balancing profitable inventory levels and turns.

Responsibilities:

• Managing specific vendor book(s) and delivering a 95% total fill for our customers
• Managing full compliance and utilization of E3 software
• Expedite Purchase Orders (P.O’s) as needed for service level
• Manage product assortment through category and SKU evaluation, efficient assortment, vendor selection, new and discontinuance of items
• Addressing and following through with vendor cuts and/or allocations
• Managing and maintaining profitable inventory to achieve budgeted levels
• Ensuring no loss to margin with 100% accurate purchase orders to maximize buy-in opportunities
• Managing the replenishment process to ensure seasonal ordering, holiday sales, trade shows and any special promotional activity
• Ensure customer satisfaction
• Perform other duties as assigned by leadership

Experience:

• Preferred: One (1) years procurement experience
• Preferred: One (1) retail/grocery experience or equivalent
• Preferred: Knowledge of technological systems such as but not limited to: Microsoft Office, E3 or AWR, E-mail, Voice mail etc

Schedule:

• Monday – Friday
• 7:00am - 4:00pm

Compensation:

• $65,000 - $75,000

Environment:

• Warehouse Office – approx. 65F – 75F

Skills:

• Physical abilities: Ability to stand, walk and sit throughout your day; Walking on a variety of flooring such as carpet, concrete, tile etc;
• Strong communication Skills: Ability to communicate clearly and effectively with peers and leaders on a daily basis
• Organizational Skills: Ability to prioritize and meet deadlines; project management
• Working in a team based environment: Working independently and as a team player to ensure our customers are receiving orders timely and with the highest quality
• Quality: Maintain integrity and high standards from all perspectives
• Safety Culture: Maintain and drive safety policies to all associates; driving for accountability of safe practices throughout shift

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

Our Pratt & Whitney Middletown, CT facility has several exciting opportunities for a Production Machinist available on 3rd shift.

3rd shift hours are Monday through Friday from approximately 11:00 pm to 7:00 am.

In this role, you will setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. You will perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications. Recognize indications of dull or damaged cutting tools and replace as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools. Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning. Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

• Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’ checklist, for upkeep and to assure equipment operates properly.

• May be required to train for, obtain and maintain licenses, operator permits and certifications within assigned area.

Qualifications You Must Have:

• High School Diploma or GED equivalent with 6 months of machining experience

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

• Follow specific directions of Leader/Supervisor to carry out repair and restoration projects for engine parts.
• Layout work requirements and obtain needed equipment to perform routine repair and alteration operations.
• Perform bench repair operations to restore parts where close tolerances are not normally required and specifically defined criteria are used.
• Recognize need and arrange for repair or replacement of equipment used in performing the work as necessary.
• .Perform routine servicing throughout the assigned area following specified procedures and written instructions such as operator’s check list for upkeep and to assure equipment operates properly.
• Assist others responsible for new process tryout, and other specialized assignments within the scope and skill level of this job description.
• .Refer difficulties to Leader/Supervisor.
• Maintain logs and records as requested to communicate findings and prepare requests for approval.
• May be required to train for, obtain and maintain licenses, operator permits, and certifications within assigned area.
• May be assigned to carry out tasks not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual’s skills.

2nd shift hours are Monday through Friday from approximately 3 pm to 12 am.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

• Able to obtain/ maintain active Security Clearance after Day 1 of work.

• 2 years of experience in blueprint reading, CNC manual machining & reading. Knowledge of shop math.

Qualifications We Prefer: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in Middletown, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Production Machinist/Processor C 3rd shift (Onsite)

FUNCTION: Setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. Perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

What You Will Do:

Job Description

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications.

• Recognize indications of dull or damaged cutting tools and replace them as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools.

• Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning.

• Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

Refer difficulties to leader or supervisor.

Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’

checklist, for upkeep and to assure equipment operates properly.

May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals' skills.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

Qualifications we prefer:

• 1-3 years of machining experience.

Qualifications We Value: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in East Hartford, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

Learn More & Apply Now!

Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship.

 In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is:

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms