Information Technology Jobs in Lombard
385 positions found — Page 5
Come be a part of the transformation happening at Loyola Medicine. New state of the art Regional Clinical Laboratory. The new lab enables greater operational efficiencies, improved turnaround times to support future growth and expansion into emerging technologies and lab testing methodologies.
Hours:
- .2FTE 8 hours per week minimum
- Nights 11:00pm - 7:30am
- Area: Blood Bank
- Location: Maywood, IL
About the role
In this role, the Medical Lab Scientist is responsible for supporting the delivery of patient care by performing laboratory testing that is utilized in the diagnosis, treatment and prevention of disease. This includes waived, moderate and high complexity testing. *Experience with waived, moderate, and high complexity testing in a clinical laboratory setting through education or work experience required*
What you'll do
- Performs all laboratory testing, including the pre-examination phase in accordance with standard operating procedures and accreditation guidelines to support the delivery of patient care.
- Conducts and documents established quality control procedures on analytical tests, equipment, reagents, media, and products; evaluates the results of quality control testing and implements corrective action according to established protocols to ensure the accuracy and quality of patient testing.
Here's what you'll need
Required:
- Bachelor's Degree/OR associate's degree- Medical Laboratory Science Program
- Specific Degree(s): Medical Technology, Medical Technician, Medical Laboratory Science
- Blood Bank experience required
Licensure/Certifications
Preferred:
- Certified Medical Laboratory Scientist (ASCP) or equivalent
- Other: Laboratory certification required (ASCP or HEW)
Perks & Benefits
- Benefits from Day One (Medical and Dental)
- Competitive Shift Differentials
- Daily Pay NEW
- Career Development
- Tuition Reimbursement
- Participation in the Public Service Loan Forgiveness Program
- 403(b) with Employer Match
- On Site Fitness Center (Gottlieb Memorial Hospital & LUMC)
- Referral Rewards
- Perks Program
Applicants for this position must be authorized to work for any employer in the U.S. We are unable to sponsor an employment visa for this position.
Pay Range: $30.00 – $45.00 per hour
Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.
Trinity Health Benefits Summary
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Schedule: Monday–Friday | Full‑Time Evenings | 1.0 FTE
Additional: Rotating weekends & holidays
Join the Transformation at Loyola Medicine
Be part of something extraordinary. Loyola Medicine is leading a new era of innovation with our state‑of‑the‑art Regional Clinical Laboratory—an open space concept designed to elevate operational efficiency, accelerate turnaround times, and position us for growth in emerging technologies and advanced laboratory testing methodologies.
Here, you'll find more than a workplace—you’ll find a mission-driven community committed to excellence and compassion.
About the Role
As a Medical Lab Scientist, you will play a vital role in supporting patient care by performing accurate and timely laboratory testing used in the diagnosis, treatment, and prevention of disease. Testing domains include waived, moderate, and high‑complexity procedures. Required: Experience with waived, moderate, and high‑complexity testing in a clinical laboratory setting—through education or hands‑on work experience.
What You’ll Do
Perform and document laboratory testing—including pre‑analytical steps—following standard operating procedures and accreditation standards to ensure high‑quality patient care.
Conduct and evaluate quality control procedures for tests, equipment, reagents, and media.
Identify, investigate, and resolve testing variances by implementing corrective actions to ensure accurate, reliable results.
What You’ll Need
Education (Required)
Bachelor’s Degree OR Associate Degree in one of the following:
Medical Laboratory Science Program
Medical Technologist
Medical Technician
Biology
Chemistry
Preferred Licensure/Certification
ASCP‑certified Medical Laboratory Scientist (MLS) or equivalent
Other acceptable certifications: ASCP or HEW
Why Loyola Medicine?
Mission‑driven culture with a strong commitment to innovation, compassion, and community.
Opportunity to contribute to a rapidly advancing Regional Clinical Laboratory.
Be part of a team that values continuous learning, professional growth, and cutting‑edge technology.
Perks & Benefits
Benefits from Day One (Medical and Dental)
Competitive Shift Differentials
Daily Pay NEW
Career Development
Tuition Reimbursement
Participation in the Public Service Loan Forgiveness Program
403(b) with Employer Match
On Site Fitness Center (Gottlieb Memorial Hospital & LUMC)
Referral Rewards
Perks Program
Applicants for this position must be authorized to work for any employer in the U.S. We are unable to sponsor an employment visa for this position.
Pay Range: $30.00 – $45.00 per hour
Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.
Trinity Health Benefits Summary
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Senior Legal Counsel
Step into a high impact role with Mitsubishi HC Capital America as a Senior Legal Counsel, where your commercial finance expertise, sharp judgment, and negotiation skills will directly shape complex lending and leasing deals. If you thrive on solving sophisticated legal challenges and partnering closely with the business, this opportunity is built for you.
HYBRID: 3 days/week in Itasca, IL
THE ROLE: STRATEGIC LEGAL PARTNER
As a Senior Legal Counsel, you will serve as a trusted legal advisor supporting commercial finance originations, regulatory compliance, supplier management, and day‑to‑day corporate legal needs. You’ll partner with leaders across Sales, Operations, Credit, Capital Markets, and the North American Legal Department to provide actionable legal guidance and ensure compliant, efficient business operations. You will play a key role in balancing legal risk with strategic business objectives while providing business oriented solutions.
KEY RESPONSIBILITIES:
Transactional Support
- Lead transactions for equipment loans, leases, and commercial financing arrangements
- Draft, review, and negotiate vendor program agreements, capital markets agreements, customer finance contracts, leasing contracts, loan agreements, and related commercial documentation
- Identify and mitigate legal and operational risks related to lending, leasing, and commercial finance products
Supplier Management & Third‑Party Risk
- Provide legal guidance on supplier onboarding, risk assessments, performance monitoring, and dispute resolution
- Partner with Procurement and Operations to mitigate risks tied to supplier agreements
Regulatory Monitoring
- Track and advise on U.S. federal and state regulations (commercial lending, leasing, consumer protection, data privacy)
- Collaborate with Compliance to integrate regulatory changes into policies, processes, and documentation
Compliance Support
- Support internal reviews, audits, and compliance inquiries
- Assist in drafting, implementing, and updating compliance policies and procedures
External Counsel Management
- Support selection and oversight of external counsel for transactions and litigation
- Ensure cost‑effective, high‑quality representation aligned with business needs
Department Operations
- Support legal technology, template management, and continuous process improvement
- Contribute to departmental workflow efficiency and operational standards
WHAT YOU BRING TO THE TABLE
- Juris Doctorate
- 5+ years of commercial finance legal experience, including equipment leasing, lending, and secured transactions
- Strong understanding of U.S. federal and state laws, UCC Articles 2 & 9, and commercial regulatory requirements
- Experience in litigation, restructuring, workouts, and distressed asset negotiations
- Proven contract drafting and negotiation experience across commercial finance sectors
- Ability to research and interpret laws, regulations, and case law, and provide practical guidance
- Strong communication and cross‑functional collaboration skills
- Skilled in drafting clear, enforceable agreements and refining contract templates
- Technology‑savvy with capability to leverage legal tech and AI tools
- Licensed and in good standing to practice law in Illinois, or eligible for in‑house counsel licensing
- Willingness to pursue professional development & CLE with emphasis on commercial finance and regulatory compliance
- Occasional travel for industry events and business site visits
COMPENSATION: $177,000 – $195,000; based on experience. This role is also eligible for a year-end bonus.
BENEFITS & PERKS
Experience a comprehensive package designed to fuel your personal and professional journey:
- Top-Tier Health & Insurance: Medical, dental, vision, life & AD&D with low premiums; prescription drug coverage
- Financial Security: 401K with immediate vesting and up to 4.5% match; RSP contributions day one; HSA contributions; flexible-spending accounts
- Time Off: Competitive vacation time, plus 10 scheduled holidays
- Wellness & Lifestyle: Annual fitness reimbursement; virtual fitness membership; Stress management tools; Employee Assistance Program for confidential support and coaching
- Professional Growth: Tuition reimbursement after one year; dedicated development budget
- Culture: Transparent, collaborative environment with a supportive, family-like team
MAKE A VISABLE IMPACT: Apply now or forward your resume directly to:
Mitsubishi HC Capital America is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, status, religion or belief, marital status, or pregnancy and maternity.
Gallagher's HR & Organizational effectiveness team provides expert guidance and hands-on support in HR, Recruiting, and Payroll to help organizations stay focused on achieving their strategic business goals.
At HelloFresh, we want to change the way people eat forever by offering our customers high-quality food and recipes for different meal occasions. Over the past 10 years, we've seen this mission spread around the world and beyond our wildest dreams. Now, we are a global food solutions group and the world's leading meal kit company, active in 18 countries across 3 continents. So, how did we do it? Our weekly boxes full of exciting recipes and fresh ingredients have blossomed into a community of customers looking for delicious, healthy, and sustainable options. The HelloFresh Group now includes our core brand, HelloFresh, as well as: Green Chef, EveryPlate, Chefs Plate, Factor_, and Youfoodz.
Associate Director, Operations
SHIFT: Wednesday - Saturday (4:30am - 3:30pm)
Factor_ a brand of HelloFresh is seeking an Associate Director Operations. As the Associate Director in operations, you will focus on operations organizational strategy and lead projects associated with cross functional engagement of staffing, training, talent development teams across the business unit. This will include aligning all support teams to a business vision of how we attract, retain and optimize both direct and indirect team members. Additional effort will be to support strategic launch initiatives including rolling out new technologies, processes and manufacturing facilities. If you're looking to impact the outcome of the business and to the lives of our team members, this is it!
You will...
- Identify organizational gaps in people operations and drive continuous improvement strategies to mitigate
- Collaborate with cross functional support teams of operations and their leadership develop a cohesive organizational strategy
- Run projects associated with new facility launches, new processes changes, and technology implementations
- Champion initiatives associated with direct labor training, onboarding, and experience
- Support cross functional strategy related to salaried development including partnering with operations leaders and HRs to ensure engagement and team morale
- Drive Safety, Quality, Cost, and Delivery, while growing and expanding capabilities that meet production mandatory requirements
- Indirectly lead operational partners to accomplish projects and initiatives
- Share and exchange operational best practices across our national sites
- Guide programs to reward and recognize performance
- Mentor, train and develop operations teammates for career progression and learning
- Create a positive team dynamic that encourages all employees to: provide feedback and drive change within the facility, adapt to the ever-changing business and stay focused on the customer experience
- Drive a customer-focused environment committed to delivering the highest quality product to our customers
You are...
- Team-oriented: you have a track record of leading cross-functional teams and cultivating collaborative partnerships at all levels and departments of an organization
- Strategic: you recognize and resolve situations that are ambiguous or challenging and use logic to identify alternatives, evaluate, and present approaches to solving complex problems while thinking in terms of contingency plans
- Bold: you're adventurous, outgoing and optimistic; you're confident making decisions and taking calculated risks
- Entrepreneurial Spirit: you have the vision, passion, and imagination; you are not afraid to ask 'what if' and constantly challenge the status quo
- Versatile: you roll with the punches and don't get overwhelmed easily; you enjoy grinding away at issues and have a knack for delivering results in hyper-growth, constantly changing environments
- Analytical: data is your friend; you're able to translate numbers into action and pave the way for efficiency
- Customer-focused: slightly obsessive-compulsive when it comes to customer experience and strive to deliver a product that is second to none
- Comprehensive background in Fulfillment, Shipping, Receiving, and Warehousing
- Motivated, developed and managed employees - our culture is a critical part of our success, and you need to help drive it
- Excitement for working in a fast-paced environment with a high level of ambiguity and change
- Interest in spending most of your time on the shop floor to learn and understand process details
- Continuous improvement and project management skills
- High level of integrity and ethics with excellent follow-through
At a minimum, you have...
- Bachelor's Degree required - Master's preferred
- 8+ years of experience in operations or people management
- Familiarity with FSMA, HACCP, SQF
- Knowledge of Lean manufacturing
- Project Management Certifications preferred
- Flexibility to travel
You'll get...
- Competitive hourly rate, 401K company match that vests immediately upon participation, & team bonus opportunities
- Generous PTO and flexible attendance policy
- Comprehensive health and wellness benefits with options at $0 monthly, effective first day of employment
- Up to 85% discount on subscriptions to HelloFresh meal plans (HelloFresh, Green Chef, Everyplate, and Factor_)
- Access to Employee Resource Groups that are open to all employees, including those pertaining to BIPOC, women, veterans, parents, and LGBTQ+
- Inclusive, collaborative, and dynamic work environment within a fast-paced, mission-driven company that is disrupting the traditional food supply chain
This job description is intended to provide a general overview of the responsibilities. However, the Company reserves the right to adjust, modify, or reassign work tasks and responsibilities as needed to meet changing business needs, operational requirements, or other factors.
#Factor #JD1008
Illinois Pay Range$123,480—$165,000 USDThis position is also eligible for the HelloFresh equity plan.
About HelloFresh
We believe that sharing a meal brings people of all identities, backgrounds, and cultures together. We are committed to celebrating all dimensions of diversity in the workplace equally and ensuring that everyone feels a sense of inclusion and belonging. We also aim to extend this commitment to the partners we work with and the communities we serve. We are constantly listening, learning, and evolving to deliver on these principles. We are proud of our collaborative culture. Our diverse employee population enables us to connect with our customers and turn their feedback into meaningful action - from developing new recipes to constantly improving our process of getting dinner to our customers' homes. Our culture attracts top talent with shared values and forms the foundation for a great place to work!
At HelloFresh, we embrace diversity and inclusion. We are an equal-opportunity employer and do not discriminate on the basis of an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. As part of the Company's commitment to equal employment opportunity, we provide reasonable accommodations, up to the point of undue hardship, to candidates at any stage, including to individuals with disabilities.
We want to adapt our processes and create a safe space that welcomes everyone so please let us know how we can accommodate our process. In case you have any accessibility requirements you can share that with us in the application form.
To learn more about what it's like working inside HelloFresh, follow us on Instagram and LinkedIn.
HelloFresh is committed to the principles of equal employment opportunity and providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, please reach out to us at:
- Europe:
- APAC:
- United States:
- Canada:
IT Operations Specialist
Reports to: Director of Technology
Role Overview
The IT Operations Specialist supports day-to-day technology operations across corporate offices and jobsites. This role serves as the primary point of contact for end-user support and works closely with the Director of Technology to strengthen and mature the company’s internal IT operations capability.
This position is ideal for a hands-on technical professional who enjoys problem-solving, working directly with users, and contributing to a structured and evolving IT environment.
Key Responsibilities
- Provide L1/L2 support for Windows 10/11 environments
- Troubleshoot Microsoft 365, Procore, Viewpoint, and related SaaS platforms
- Resolve login, MFA, and access-related issues
- Perform onboarding and offboarding (AD, M365 licensing, device configuration)
- Configure and deploy laptops, tablets, and mobile devices
- Troubleshoot basic networking issues (IP, DHCP, DNS)
- Coordinate with the MSP for escalations when required
- Maintain accurate ticket documentation and follow structured processes
- Identify recurring issues and suggest improvements
- Take ownership of assigned tickets through resolution or proper escalation
Qualifications
- 3–5 years of hands-on IT support experience (corporate or multi-site preferred)
- Strong Windows 10/11 troubleshooting skills and Microsoft 365 proficiency
- Hands-on experience managing users and groups in Active Directory (on-prem or hybrid preferred)
- Experience with Microsoft 365 in hybrid environments
- Working knowledge of networking fundamentals (IP addressing, DNS, DHCP, VLAN basics)
- Experience with ticketing systems
- Device provisioning experience
- Relevant certifications are a plus, demonstrated hands-on experience is highly valued.
Professional Skills
- Strong communication skills (technical to non-technical)
- Structured and methodical troubleshooting approach
- Process-driven and organized
- High accountability and ownership mindset
- Comfortable working in a hybrid internal + MSP support model
- Demonstrates responsiveness and reliability in hybrid work environments
Work Model
Primarily on-site role supporting multiple offices and jobsites.
On-site presence aligned with operational needs
- 1–2 remote days per week depending on workload and projects
- Full-time, Monday–Friday
- 7:00 AM on-site start time
- Occasional after-hours availability when scheduled in advance
We are seeking a driven and detail-oriented Tailormade Travel Consultant to design, price, and sell highly customized travel itineraries that exceed guest expectations. This is a consultative sales role ideal for someone who thrives on relationship-building, destination expertise, and closing high-value bookings.
What You’ll Do
Sales & Client Relationship Management
- Meet or exceed established sales goals
- Develop and grow a network of new and existing clients through proactive outreach
- Build long-term relationships with thoughtful, high-touch engagement
- Follow up on quotes and pending bookings to maximize conversion rates
- Communicate value effectively to secure bookings
Itinerary Design & Booking Management
- Create customized travel itineraries in collaboration with guests and travel advisors
- Evaluate supplier pricing to ensure competitive and value-driven proposals
- Confirm all required services with third-party partners
- Manage financial components of bookings in accordance with company guidelines
- Ensure booking accuracy and completeness across internal systems
Collaboration & Service Excellence
- Partner cross-functionally to ensure a seamless booking experience
- Support post-travel guest satisfaction initiatives
- Maintain high service standards throughout the sales lifecycle
- Contribute ideas to improve processes, procedures, and technology
What We’re Looking For
- Minimum 2 years of travel industry experience
- Strong destination knowledge and global awareness
- Proven ability to close sales and achieve targets
- Excellent verbal and written communication skills (phone-based sales required)
- Detail-oriented with strong organizational and multitasking abilities
- Experience with Sabre (basic required; intermediate preferred)
- Comfortable learning new systems and technologies
- Associate or Bachelor’s degree preferred
Comprehensive benefits package available for eligible full-time employees, including medical, dental, vision, 401(k) with company match, insurance coverage, and travel-related perks.
Benefits:
- 401(k)
- Health insurance
- Paid time off
- Travel reimbursement
- Vision insurance
Work Location: Hybrid remote in Downers Grove, IL 60515
POSITION PURPOSE
Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of diagnostic and therapeutic imaging equipment used throughout the healthcare facility. Assists in the planning and installation of diagnostic and therapeutic imaging equipment.
ESSENTIAL FUNCTIONSKnows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of assigned clinical equipment.
Assumes responsibility for Preventive Maintenance (PM) and repair of clinical equipment as assigned by Clinical Engineering (CE) Manager. Resolves sensitive or complex problems with supervision.
Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of radiological and general medical equipment. Makes recommendations regarding imaging test equipment and spare equipment parts to the CE Manager.
Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.
Attends training sessions on equipment maintenance in order to keep up-to-date on technological and medical equipment advances. Conducts in-service or coordinates training to radiology clinical/professional staff on proper use and safety of radiology equipment. Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.
Provide on-call service coverage after normal business hours on a rotating basis, as assigned.
Maintains high level of customer satisfaction as demonstrated by the results of customer satisfaction surveys.
Participates in teamwork by: Keeping others informed. Initiating group decision-making. Working to accomplish team objectives and projects. Seeking feedback about one’s effectiveness as a team member.
Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.
May perform duties as Lead Biomedical Equipment Technician or other duties as assigned or required by the CE Manager.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONS:
Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience. Certified Radiology Equipment Service (CRES) preferred but not required.
One to two years of equivalent experience performing corrective and planned maintenance on diagnostic x-ray, ultrasound and other equipment including but not limited to Mobile, Carms, Radiology Rooms, Dental units, Simulators, Film Processors, laser Camera, CRs, Alternators, 1st Look Nuclear Cameras, etc. Related experience operating complex testing equipment, including but not limited high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.
Must have a basic understanding of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).
Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, , EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.
Maintain up-to-date understanding of The Joint Commission, and NFPA standards as well as state and federal regulations.
Working knowledge and ability to use basic hand tools and the test equipment specific to imaging and biomedical modalities.
Ability to analyze and interpret information provided by clinical staff and equipment to determine operational condition, and ability to follow complex written instructions, perform tasks and document actions taken.
Must have basic understanding of personal computer operation, applications, and ability to input data using a keyboard. Network training preferred.
Must be comfortable operating in a collaborative, shared leadership environment.
Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.
Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS
Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Possess ability to mentally concentrate while being subject to stress, interruptions and frequently changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Compensation:
Pay Range: $31.87 - $47.81 per hour
Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.
Trinity Health Benefits Summary
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
POSITION PURPOSE
Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of diagnostic and therapeutic imaging equipment used throughout the healthcare facility. Assists in the planning and installation of diagnostic and therapeutic imaging equipment.
ESSENTIAL FUNCTIONSKnows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of assigned clinical equipment.
Assumes responsibility for Preventive Maintenance (PM) and repair of clinical equipment as assigned by Clinical Engineering (CE) Manager. Resolves sensitive or complex problems with supervision.
Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of radiological and general medical equipment. Makes recommendations regarding imaging test equipment and spare equipment parts to the CE Manager.
Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.
Attends training sessions on equipment maintenance in order to keep up-to-date on technological and medical equipment advances. Conducts in-service or coordinates training to radiology clinical/professional staff on proper use and safety of radiology equipment. Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.
Provide on-call service coverage after normal business hours on a rotating basis, as assigned.
Maintains high level of customer satisfaction as demonstrated by the results of customer satisfaction surveys.
Participates in teamwork by: Keeping others informed. Initiating group decision-making. Working to accomplish team objectives and projects. Seeking feedback about one’s effectiveness as a team member.
Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.
May perform duties as Lead Biomedical Equipment Technician or other duties as assigned or required by the CE Manager.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONS:
Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience. Certified Radiology Equipment Service (CRES) preferred but not required.
One to two years of equivalent experience performing corrective and planned maintenance on diagnostic x-ray, ultrasound and other equipment including but not limited to Mobile, Carms, Radiology Rooms, Dental units, Simulators, Film Processors, laser Camera, CRs, Alternators, 1st Look Nuclear Cameras, etc. Related experience operating complex testing equipment, including but not limited high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.
Must have a basic understanding of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).
Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, , EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.
Maintain up-to-date understanding of The Joint Commission, and NFPA standards as well as state and federal regulations.
Working knowledge and ability to use basic hand tools and the test equipment specific to imaging and biomedical modalities.
Ability to analyze and interpret information provided by clinical staff and equipment to determine operational condition, and ability to follow complex written instructions, perform tasks and document actions taken.
Must have basic understanding of personal computer operation, applications, and ability to input data using a keyboard. Network training preferred.
Must be comfortable operating in a collaborative, shared leadership environment.
Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.
Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS
Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Possess ability to mentally concentrate while being subject to stress, interruptions and frequently changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Compensation:
Pay Range: $31.87 - $47.81 per hour
Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.
Trinity Health Benefits Summary
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
POSITION PURPOSE
Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of diagnostic and therapeutic imaging equipment used throughout the healthcare facility. Assists in the planning and installation of diagnostic and therapeutic imaging equipment.
ESSENTIAL FUNCTIONSKnows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of assigned clinical equipment.
Assumes responsibility for Preventive Maintenance (PM) and repair of clinical equipment as assigned by Clinical Engineering (CE) Manager. Resolves sensitive or complex problems with supervision.
Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of radiological and general medical equipment. Makes recommendations regarding imaging test equipment and spare equipment parts to the CE Manager.
Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.
Attends training sessions on equipment maintenance in order to keep up-to-date on technological and medical equipment advances. Conducts in-service or coordinates training to radiology clinical/professional staff on proper use and safety of radiology equipment. Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.
Provide on-call service coverage after normal business hours on a rotating basis, as assigned.
Maintains high level of customer satisfaction as demonstrated by the results of customer satisfaction surveys.
Participates in teamwork by: Keeping others informed. Initiating group decision-making. Working to accomplish team objectives and projects. Seeking feedback about one’s effectiveness as a team member.
Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.
May perform duties as Lead Biomedical Equipment Technician or other duties as assigned or required by the CE Manager.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONS:
Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience. Certified Radiology Equipment Service (CRES) preferred but not required.
One to two years of equivalent experience performing corrective and planned maintenance on diagnostic x-ray, ultrasound and other equipment including but not limited to Mobile, Carms, Radiology Rooms, Dental units, Simulators, Film Processors, laser Camera, CRs, Alternators, 1st Look Nuclear Cameras, etc. Related experience operating complex testing equipment, including but not limited high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.
Must have a basic understanding of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).
Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, , EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.
Maintain up-to-date understanding of The Joint Commission, and NFPA standards as well as state and federal regulations.
Working knowledge and ability to use basic hand tools and the test equipment specific to imaging and biomedical modalities.
Ability to analyze and interpret information provided by clinical staff and equipment to determine operational condition, and ability to follow complex written instructions, perform tasks and document actions taken.
Must have basic understanding of personal computer operation, applications, and ability to input data using a keyboard. Network training preferred.
Must be comfortable operating in a collaborative, shared leadership environment.
Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.
Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS
Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Possess ability to mentally concentrate while being subject to stress, interruptions and frequently changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Compensation:
Pay Range: $31.87 - $47.81 per hour
Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.
Trinity Health Benefits Summary
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
POSITION PURPOSE
Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of diagnostic and therapeutic imaging equipment used throughout the healthcare facility. Assists in the planning and installation of diagnostic and therapeutic imaging equipment.
ESSENTIAL FUNCTIONSKnows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of assigned clinical equipment.
Assumes responsibility for Preventive Maintenance (PM) and repair of clinical equipment as assigned by Clinical Engineering (CE) Manager. Resolves sensitive or complex problems with supervision.
Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of radiological and general medical equipment. Makes recommendations regarding imaging test equipment and spare equipment parts to the CE Manager.
Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.
Attends training sessions on equipment maintenance in order to keep up-to-date on technological and medical equipment advances. Conducts in-service or coordinates training to radiology clinical/professional staff on proper use and safety of radiology equipment. Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.
Provide on-call service coverage after normal business hours on a rotating basis, as assigned.
Maintains high level of customer satisfaction as demonstrated by the results of customer satisfaction surveys.
Participates in teamwork by: Keeping others informed. Initiating group decision-making. Working to accomplish team objectives and projects. Seeking feedback about one’s effectiveness as a team member.
Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.
May perform duties as Lead Biomedical Equipment Technician or other duties as assigned or required by the CE Manager.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONS:
Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience. Certified Radiology Equipment Service (CRES) preferred but not required.
One to two years of equivalent experience performing corrective and planned maintenance on diagnostic x-ray, ultrasound and other equipment including but not limited to Mobile, Carms, Radiology Rooms, Dental units, Simulators, Film Processors, laser Camera, CRs, Alternators, 1st Look Nuclear Cameras, etc. Related experience operating complex testing equipment, including but not limited high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.
Must have a basic understanding of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).
Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, , EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.
Maintain up-to-date understanding of The Joint Commission, and NFPA standards as well as state and federal regulations.
Working knowledge and ability to use basic hand tools and the test equipment specific to imaging and biomedical modalities.
Ability to analyze and interpret information provided by clinical staff and equipment to determine operational condition, and ability to follow complex written instructions, perform tasks and document actions taken.
Must have basic understanding of personal computer operation, applications, and ability to input data using a keyboard. Network training preferred.
Must be comfortable operating in a collaborative, shared leadership environment.
Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.
Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS
Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Possess ability to mentally concentrate while being subject to stress, interruptions and frequently changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Compensation:
Pay Range: $31.87 - $47.81 per hour
Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.
Trinity Health Benefits Summary
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.