Information Technology Jobs in Hoffman Estates, IL

Title: Senior Engineer,MEMS Characterization

Department: MEMS Engineering

Location: Itasca, Illinois

SUMMARY DESCRIPTION:

MEMS Characterization Senior Engineer will work with design, process, and failure analysis engineer on assisting characterization and failure analysis of the MEMS device, while supporting technology development, product qualifications and quality monitoring. Employee will maintain and develop new test solutions, recommend hardware requirements based on existing trends in characterization.

Responsibilities

• Developing and maintain MEMS test solutions for production failure analysis, collaborating with design and process engineering to further characterization efforts and drive yield improvement
• Ensuring hardware and software installations are maintained.
• Continuous improvement of characterization capabilities collaborating with MEMS development team
• Perform microphone, MEMS, assembly failure analysis
• Work with design and process engineer to define characterization requirements and support execution of the characterization, including submitting work order requests and writing characterization reports.

Qualifications

• Master of Science/Engineering in Electrical/Mechanical/Material/Physics (or related field) with 2-5 years’ experience. PhD is a plus
• Experience in troubleshooting, debugging and with failure analysis of MEMS sensors is desired
• Familiar with material/device characterization using optical, electrical, mechanical methods
• Basic knowledge of acoustics and mechanics is an asset.
• Must be a team player with good communication skill.
• Familiar with material/device characterization using optical, electrical, mechanical methods
• Knowledge of calibration methodologies and best practices
• Basic knowledge of statistical analysis (JMP, MiniTab, R) is an asset
• Reliability testing experience is an asset
• Experience with electrical test equipment such as parameter analyzer, oscilloscope, probe station, and data acquisition system are desired
• Experience with advanced surface science methodologies (SEM, Raman, Auger, FIB, FTIR) an asset
• Hands on experience on developing environmental testing setup and fixtures for sensors under thermal, vibration, and electrical tests is a plus
• Solid foundation in MEMS microphone acoustics theory, including capacitive transduction principles (Experience analyzing thin-film residual stress, mechanical-electrical sensitivity optimization, damping resistance (Skvor's formula), and high-frequency response/SNR enhancement mechanisms) is a plus
• Proficient in finite element analysis (FEA) tools such as COMSOL Multiphysics or ANSYS for 3D MEMS microphone simulations is a plus
• Understand the principle of dynamic system modeling and proficient in Matlab Simulink and LTSpice is a plus

COMPANY DESCRIPTION:

Knowles is a market leader and global provider of advanced micro-acoustic microphones and balanced armature speakers, audio solutions, and high performance capacitors and radio frequency ("RF") filtering products, serving the MedTech, defense, consumer electronics, electric vehicle, industrial, and communications markets. Our focus on the customer, combined with unique technology, proprietary manufacturing techniques, and global operational expertise, enables us to deliver innovative solutions across multiple applications. Knowles, founded in 1946 and headquartered in Itasca, Illinois, has approximately 7,000 employees at facilities located in 13 countries around the world. At Knowles, we are committed to engineering a better tomorrow through the actions we take on a daily basis. We believe that our focus on ethical, socially responsible, and environmentally sustainable behavior guides our decision-making processes and helps keep us accountable. Visit us at

EEO-M/F/D/V

Company Description

ITW Electronic Component Solutions is a global leader, comprised of distinguished brands specializing in unique product technologies for various industries. These industry-leading brands provide innovative solutions to key markets, reinforcing ITW as a trusted name in electronic component solutions worldwide. The ITW ECS group includes ITW Formex, ITW Linx, and ITW Lumex, all of which contribute to the development of cutting-edge technologies across global markets.

The Buyer/Planner is responsible for planning and scheduling production activities while managing the procurement of raw materials, components, and services required for the ITW ECS business units. This role ensures that production schedules, material availability, and supplier performance align to meet customer demand, maintain optimal inventory levels, and support overall operational efficiency. This is a full-time, onsite position in Bartlett, IL. Only local candidates will be considered.

Key Responsibilities

Production Planning & Scheduling

• Develop, maintain, and adjust production schedules based on customer demand, forecasts, and capacity constraints
• Coordinate daily production planning activities with operations, ensuring labor, equipment, and materials are properly allocated
• Monitor work‑in‑process and finished goods levels to ensure on‑time order completion
• Communicate schedule changes or risks to operations, customer service, and leadership

Material Planning & Inventory Management

• Maintain accurate material requirements planning (MRP) within the ERP system
• Ensure adequate inventory levels are maintained to meet production schedules while minimizing excess or obsolete stock
• Conduct root‑cause analysis on shortages, delays, or inventory inaccuracies and implement corrective actions
• Track safety stock levels and update planning parameters as needed

Purchasing & Supplier Management

• Source, select, and purchase raw materials, components, and indirect supplies in alignment with production needs
• Manage supplier relationships and monitor vendor performance.
• Track and publish critical supply chain metrics, including customer and supplier on-time delivery.
• Follow up on open purchase orders, expedite materials when needed, and resolve delivery or quality issues
• Maintain accurate vendor records and purchasing data in the ERP system

Capacity & Resource Planning

• Analyze production capacity, equipment constraints, and labor availability to ensure feasible schedules
• Recommend adjustments to staffing levels, shift schedules, or outsourcing when required to meet demand
• Partner with engineering on new products, engineering changes, and phase-outs

Cross-Functional Collaboration

• Coordinate with procurement, operations, engineering, customer service, and quality to maintain smooth production flow
• Communicate proactively regarding material constraints, schedule risks, and priority changes
• Support S&OP processes by providing data on capacity, demand, inventory, and supplier performance

Continuous Improvement

• Implement Lean, Six Sigma, or other process improvement initiatives to enhance material flow and scheduling accuracy
• Improve planning tools, part parameters, and forecasting methods
• Participate in cost-reduction efforts through sourcing, inventory optimization, and process efficiencies

Minimum Required Skills and Education

• High School Diploma required
• 3 years of experience in production planning, materials management, or purchasing in a manufacturing environment
• Prior experience with ERP/MRP systems
• Strong analytical and organizational skills
• Proficiency with Excel and planning tools
• Knowledge of manufacturing processes, capacity planning, and inventory control principles
• Ability to speak, read, and write in English

Preferred Skills and Education

• Associate’s or Bachelor’s degree in Supply Chain, Operations, Business or related field
• Experience with Epicor ERP preferred

Work Conditions

• Primarily office environment, but may require periodic walking throughout the facility to coordinate with production, shipping, and warehouse teams

This is a full-time, onsite position in Bartlett, IL. Only candidates local to the Chicago area will be considered.

Compensation range: $30-$32 per hour

Why ITW ECS?

Here’s what we offer to help you build the future you want:

• Generous Retirement Benefits – 401(k) match PLUS an additional retirement contribution to help you plan for the future.
• Paid Time Off – Paid holidays, sick days, and vacation time to take time for what matters.
• Company-Paid Insurance – Life, AD&D, Short-Term & Long-Term Disability insurance to give you peace of mind.
• Family-Friendly Benefits – 4 weeks of paid parental leave and adoption reimbursement to support your family journey.
• Education Assistance – tuition reimbursement because we believe in investing in your personal and professional development.

ITW is an equal opportunity employer. We value our colleagues’ unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. 

As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. 

All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.

The Warehouse Operations Director is responsible for the operational excellence of all aspects of AAR's Global warehouse operations; provides overall guidance and oversight in the areas of execution, technology, infrastructure, safety, streamlining and interfacing with AAR business and operational entities, internal and external customers, continuous process improvements, and developing and monitoring related key performance indicators. This role blends leadership with active participation, requiring someone who can interact, manage and guide people and contribute directly to the success and growth of the organization.

What you will be responsible for:

• Take lead on operational excellence and logistical functions of AAR's global warehouses, with a focus on streamlines processes, efficiencies, productivity, infrastructure requirements, technology, hands-on management and compliance.
• Actively assist in overseeing warehouse operations, including inventory management.
• Own operational strategy, execution, and continuous improvement for internal and third-party logistics (3PL) warehouses, ensuring efficient, compliant, and cost-effective movement of goods worldwide.
• In depth understanding of global import and export operations and requirements, ensuring compliance with all customs, trade, and regulatory requirements.
• Customs filings and documentation to ensure timely and accurate clearance.
• Partner with Legal, Finance, and Compliance teams on trade regulations, audits, duty optimization, and risk mitigation.
• Monitor and adapt to changes in global trade laws, tariffs, and regulations.
• Develop dashboards and reports to provide visibility into global performance and risks.
• Define, implement, and monitor global KPIs and metrics; adjust activities to improve efficiency and workflows.
• Develop and execute strategies aligned with business growth, customer service, and cost objectives.
• Ensure safe, efficient, and compliant operations in accordance with local regulations and company standards.
• Performs the duties of associates supervised and all other duties as assigned.

Leadership Responsibilities:

• Supervise, mentor, and develop staff, fostering a culture of accountability and growth.
• Act as a point of escalation to resolve daily operational issues and discrepancies.
• Develop and communicate daily/weekly/monthly goals to staff and management.
• Monitor performance and ensure deadlines are met consistently.
• Enforce safety guidelines and operational best practices.
• Advocate for continuous improvement and foster team buy-in for policy changes.
• Suggest efficiency ideas, cost reduction measures and assist with the implementation of changes within inbound and outbound warehouse operations.
• Identify problems, propose solutions to other members of management, and promote cooperation with other departments.
• Keep open communication channels with associates by answering questions and explaining policies and procedures.

What you need to be successful in this role:

• 10+ years of experience in global supply chain, warehouse management or logistics management, with at least 5 years in a supervisory role.
• Ability to lead global operations, ensuring compliance with international trade laws, managing customs, documentation, tariffs, and optimizing cross-border processes.
• Strong understanding of import/export management and customs filing.
• Experience supporting 3PL warehouses and management of inventory.
• Demonstrated ability to define, analyze, and report on warehouse metrics.
• Proven ability to lead, train, and motivate teams while actively participating in warehouse operations.
• Ability to effectively communicate to leadership, peers and team members. Must be able to shift communication styles to interact successfully across departments.
• Critical thinking, problem solving and reasoning skills.
• Enthusiastic about building efficiency and driving continuous improvement.

The rewards of your career at AAR go far beyond just your salary:

• Competitive salary and bonus package
• Comprehensive benefits package including medical, dental, and vision coverage
• 401(k) retirement plan with company match
• Generous paid time off program
• Professional development and career advancement opportunities

Physical Demands/Work Environment:

The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

• Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach and move about the facility.

• The environmental characteristic for this position is an office setting.

• Candidates should be able to adapt to a traditional business environment.

AAR provides accommodation in accordance with applicable laws through all stages of the hiring process. If you require accommodation for any part of the application and/or hiring process, please advise Human Resources.

Compensation:

The anticipated salary range for this position is $140,000 to $170,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. [In addition to base pay, this role is eligible for a bonus.] AAR offers a competitive benefits package, including medical/dental/vision/life/and AD&D insurance, 401(k) savings plan with employer match, paid time off and holiday pay, as well as opportunities for professional development and growth.

#LI-MA1 #LI-ONSITE

DATE: 2025

LOCATION: On-Site, 2661 Galvin Ct., Elgin, IL USA

DEPARTMENT: Quality

SALARY: $80,000 - $100,000/ year

WHY NEWHAVEN DISPLAY

At Newhaven Display, we’re more than a global display manufacturer—we’re a hub of innovation, creativity, and collaboration. Our products power many of the electronics you use every day, from home appliances and medical devices to industrial equipment and automotive tech. We specialize in LCD, OLED, and TFT displays, serving clients across a wide range of industries.

Our mission? Deliver high-quality display solutions and design services that help our customers grow—while continuously pushing the limits of what’s possible.

ABOUT THE ROLE

Are you a hands-on engineer with a comprehensive background in electronics, quality systems, and production assembly? As our Manufacturing Process Engineer, you will be the critical link that translates design specifications into efficient, repeatable, and high-quality manufacturing processes for our cutting-edge display products. You will leverage your expertise to support the production floor, troubleshoot issues, and ensure seamless communication between our Engineering, Quality, and Production teams.

If you are a proactive problem-solver with a passion for process excellence in electronics manufacturing, this is a fantastic opportunity to make a direct impact on product yield and operational efficiency.

WHAT YOU'LL DO (Key Responsibilities):

Cross-Functional Liaison & Engineering Support

• Serve as the primary technical point of contact for the Production floor, communicating daily with operators, technicians, and supervisors.
• Translate new product designs and Engineering Change Orders (ECOs) into clear, actionable manufacturing plans and requirements.
• Act as the "Voice of Manufacturing" to the Design Engineering team, providing constructive feedback on manufacturability.

Production Troubleshooting & Root Cause Analysis

• Provide hands-on technical support to production lines to resolve assembly, test, and process issues to minimize downtime.
• Participate in the Root Cause Analysis (RCA) process for all production defects, failures, and yield excursions.
• Manage the Material Review Board (MRB) process, prescribing the appropriate disposition (repair, rework, or scrap) for non-conforming display assemblies.
• Design, implement, and maintain custom fixtures and test equipment used by the production team.

Process Documentation & Optimization

• Develop, write, and maintain clear, detailed Manufacturing Work Instructions for new and existing product assemblies.
• Utilize Lean Manufacturing and Six Sigma methodologies to continuously analyze and improve production processes, targeting improvements in cycle time, cost, and first-pass yield.
• Ensure all production documentation meets internal quality standards and is compliant with relevant industry certifications (e.g., ISO 9001).

Quality Assurance Collaboration

• Collaborate directly with the Quality team to establish in-process inspection points and quality control checks.
• Implement Corrective and Preventive Actions (CAPA) based on identified process gaps and quality trends.
• Audit manufacturing processes and equipment to ensure they are operating within defined parameters and validated limits.

WHAT YOU BRING:

Education & Experience

• Bachelor's degree or higher in Electrical/Electronics Engineering, Manufacturing Engineering, Industrial Engineering, or a related technical field.
• 4+ years of experience in a technical role within a manufacturing environment, preferably in electronics assembly, display technology (LCD, OLED, TFT), or PCBA.
• Proven experience in a cross-functional role serving as a liaison between engineering, quality, and production.

Technical Skills (Hard Skills)

• Strong foundation in electronics theory and the ability to interpret schematics, wiring diagrams, and component datasheets.
• Proficiency in process improvement methodologies (e.g., Lean Manufacturing, Six Sigma).
• Experience with quality systems (e.g., ISO 9001) and strong experience leading Root Cause Analysis (RCA).
• Familiarity with production equipment, tooling, and process validation in an electronics manufacturing environment (e.g., soldering, wire bonding, assembly).
• Ability to read, interpret, and modify technical documentation (CAD drawings, BOMs).

Soft Skills

• Excellent problem-solving skills with a high degree of urgency to resolve production issues and minimize line downtime.
• Exceptional verbal and written communication skills, with the ability to explain complex technical concepts to non-technical production staff and management alike.
• Superior attention to detail and strong organizational skills to manage multiple projects simultaneously.

WHY JOIN NEWHAVEN DISPLAY?

• Impactful Work: Your efforts will directly translate into higher product quality and improved profitability.
• Collaborative Environment: Work closely with cross-functional leadership, serving as the authority on how a product is built.
• Growth: Newhaven Display is committed to continuous improvement, offering a clear path to advance your expertise in display and electronics manufacturing.

COMPENSATION & BENEFITS:

At Newhaven Display, your career is more than just a job — it’s a launchpad. You'll be supported by a collaborative team, encouraged to explore new ideas, and equipped with the tools and training you need to grow and succeed. Along the way, you’ll enjoy a benefits package designed to support your personal and professional well-being:

• Competitive salary
• Paid time off (PTO) to explore your passions
• Medical, dental, and vision insurance to keep you covered
• 401(k) with company match to invest in your future
• Career advancement opportunities within a growing tech company

Ready to grow your career and make an impact at a cutting-edge technology company? Submit your resume and a cover letter outlining your achievements and why you are a great fit for Newhaven Display.

This facility is seeking an Nocturnist Physician locum tenens support as they look to fill a current need. 

Details & requirements for this opportunity:

Schedule: 7P-7A

Setting: Hospital

Types of Case: General

Credentialing timeframe: 60+ days

Average 18 Patients Per Shift

AMN Healthcare is a digitally enabled workforce solutions partner focused on solving the biggest challenges affecting healthcare organizations today. We offer a single-partner approach to optimize labor sources, increase operating margins, and provide technologies to expand the reach of care.

This facility is seeking a Certified Registered Nurse Anesthetist (CRNA) for locum tenens support as they look to fill a current need.

Details & requirements for this opportunity:

• Available Shift Length and Scheduling Requirements: Monday through Friday
• Required Cases: General, Thoracic, Podiatry, Endocrine, Obstetrics 
• Electronic Medical Record (EMR): Cerner
• Care Team (and ratio) or Independent: Care Team—5 MDs/15 CRNAs daily
• Credentialing Timeframe: up to 90 days
• Illinois License required

AMN Healthcare is a digitally enabled workforce solutions partner focused on solving the biggest challenges affecting healthcare organizations today. We offer a single-partner approach to optimize labor sources, increase operating margins, and provide technologies to expand the reach of care.

Sr Switch technician/engineer

Duration: 30 Months i.e., 2.5 Years

Client: One of top in fortune 100 companies.

JOB DESCRIPTION :-

Targeted Years of Experience: 5-7 years

JOB DUTIES:

Contractor will be responsible for building and provisioning of Nokia routers in a complex network and integrating them into the network remotely. Building files for integration of the routers so they can be reached remotely and working with field engineers to bring equipment online in the Client Network. Advanced operation of switching, data communications, and peripheral equipment associated with the Mobile Switching Center (MSC). Transport testing of fiber will be required to ensure that fiber is working within specifications. Will work with multiple stakeholders to complete projects efficiently, update trackers, and complete necessary milestones for projects. Contractor will need to be able to work in a complex environment with very little supervision to complete projects.

MUST HAVE SKILLS: TCP/IP skills, Nokia router provisioning experience, telecom switch experience, basic computer skills

DESIRED SKILLS:

Previous Client Wireless switch experience.

Cisco and Ciena router and Ericsson AMOS configuration experience.

EDUCATION/CERTIFICATIONS:

A technical degree in Electronics, Electronics Engineering, or Telecommunications is desired

Dexian is a leading provider of staffing, IT, and workforce solutions with over 12,000 employees and 70 locations worldwide. As one of the largest IT staffing companies and the 2nd largest minority-owned staffing company in the U.S., Dexian was formed in 2023 through the merger of DISYS and Signature Consultants. Combining the best elements of its core companies, Dexian's platform connects talent, technology, and organizations to produce game-changing results that help everyone achieve their ambitions and goals.

Dexian's brands include Dexian DISYS, Dexian Signature Consultants, Dexian Government Solutions, Dexian Talent Development and Dexian IT Solutions. Visit to learn more.

Dexian is an Equal Opportunity Employer that recruits and hires qualified candidates without regard to race, religion, sex, sexual orientation, gender identity, age, national origin, ancestry, citizenship, disability, or veteran status.

The Senior Business Applications Manager leads and optimizes the organization's business application landscape with a focus on SQL‐based systems and EDI/data‐synchronization processes. This role is responsible for understanding, documenting, and enhancing business applications, data workflows, and system integrations to support efficient, data‐driven operations. The position requires strong analytical and technical expertise in SQL, business intelligence, and application optimization, and plays a critical role in ensuring systems are scalable, secure, and aligned with the company's digital transformation initiatives.

This position is on-site 4 days a week in Elgin, IL.

Functions of the Position:

• Leads the strategy, development, and optimization of data applications, integrations, workflows, and business intelligence systems. Oversees design and implementation to ensure reliability, efficiency, and alignment with business requirements.
• Reviews and analyzes existing business applications, data flows, and integration points to identify inefficiencies, gaps, and modernization opportunities.
• Recommends improvements to streamline processes, reduce complexity, and improve system reliability across SQL and EDI environments.
• Provides direction, coaching, and oversight to SQL and EDI teams.
• Ensures alignment of priorities, development standards, documentation practices, and project execution.
• Works closely with decision makers across the organization to identify, recommend, and implement business application improvements and data‐driven solutions that support corporate goals.
• Oversees system integrations, data synchronization, and EDI workflows to ensure accurate and timely exchange of information between internal applications and external partners.
• Provides escalation support for data translation and processing issues.
• Develops and maintains documentation for application architecture, data workflows, and integration processes.
• Ensures technical specifications and process maps are accurate and accessible for ongoing support and future enhancements.
• Coordinates the installation, upgrade, and maintenance of business applications, ensuring integrations remain stable and compatible with new technologies or updates.
• Ensures compliance with data governance policies, security standards, and best practices across all business applications and integration processes.

Education, Experience, and Knowledge:

• Bachelor's degree in Computer Science or a related field preferred.
• Minimum of 7 years of experience in database management and business application management, with at least 5 years in a supervisory or managerial role.
• Demonstrated leadership and team management skills, with the ability to motivate and guide a team.
• EDI experience preferred but not required.
• Expertise in SQL and database technologies (SSMS, SSIS, SSRS, Power BI, ETL processes), with experience in system integrations, data mapping, and workflow optimization.

Certificates, Licenses, and Registrations:

• Formal project management training or certification is a plus.

Skills and Competencies:

• Strong analytical, problem‐solving, and documentation skills.
• Ability to communicate technical concepts clearly and effectively to business stakeholders.
• Commitment to staying current on emerging technologies related to data management, integration, and business applications.
• Ability to design, troubleshoot, and support API‐driven integrations between business applications and third‐party systems.

Additionally, we provide a comprehensive benefits package that reflects our commitment to support the wellness of our colleagues and their families. This includes health benefits, professional growth support, generous paid time off benefits to support work/life balance, retirement benefits and other programs to support financial wellness. A full listing of our extensive benefits package can be found on our Company website, located here: is an Equal Opportunity Employer:

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran.

Job ID: 518077

Exempt

Oldcastle Infrastructure™, a CRH company, is the leading provider of utility infrastructure solutions for the water, energy, and communications markets throughout North America. We’re more than just a manufacturer of precast concrete, polymer concrete, or plastic products. We’re a trusted and strategic partner to engineers, contractors, distributors, specifiers, and more. With our network of more than 80 manufacturing facilities and more than 4,000 employees, we’re leading the industry with innovation and a safety-first mindset.

Job Summary

The Area Quality Manager is responsible for providing leadership and direction for the quality managers and technicians in accordance with the vision and values of the corporation and Plant Managers. Models and demonstrates a “Culture of Safety” for all plant Quality Control Teams and all employees by actively utilizing systems and processes that achieve an Employee Driven, Hazard Controlled environment. Holds self and quality managers and quality techs accountable for adherence to standards, policies & regulations for the safe, environmentally compliant production of a quality precast concrete product. Implements and manages all aspects of the OPI Quality Program to meet customer expectations and all compliance requirements. Actively participates in training and development of self and others as part of the plant and regional succession planning program.

Job Location

• This position will be located at any of our Infrastructure plants in Illinois, Wisconsin, or Michigan

Job Responsibilities

• Ensure daily activities for each plants Quality Assurance programs are complete, overseeing and auditing all inspections and testing as needed
• Ensures plants meet compliance documentation (DOT, ACPA, NPCA, ACI & OPI) and recordkeeping for the facility
• Holds monthly regional QC meetings to review corrective actions for specific quality issues/concerns and KPIs
• Provide monthly training for plant Quality Control Trainings.
• Ensure plants are following all third-party requirements
• Assist third-party agencies with facility audits (DOT, NPCA, ACPA, other customers as required)
• Participate in auditing Oldcastle facilities as needed
• Report-out on quality issues/deficiencies to regional management team and ensure proper corrective actions assigned and closed out in a timely manner
• Recommend repairs for product, as needed
• Recommend corrective actions on mix design to engineering, as needed
• Assists in the corrective action/progressive disciplinary process as required
• Maintains regional database for key quality control documents
• Maintain thorough knowledge of precast processes and equipment, have workable knowledge of industry technological developments and best practices

Job Requirements

• Demonstrated ability to effectively plan and allocate resources
• Ability to travel up to 50%
• Written and oral communication skills across all levels of the organization
• Ability to effectively implement and utilize process and procedures
• Basic knowledge of effective and efficient quality & continuous improvement methods
• Basic knowledge of company product, policies, and procedures
• Interpersonal & organizational skills
• Demonstrated successful application of supervisory skills
• Proven problem-solving skill set
• Basic mathematical ability
• Ability to operate a computer and supporting software packages
• Ability to work on multiple projects simultaneously
• Ability to effectively implement change
• Ability to facilitate meetings and lead teams
• Ability to effectively manage conflict
• Ability to analyze process variance, coordinate a course of action and effectively implement solutions with their team
• NPCA PQS Certifications
• ACPA Quality Certification
• ACI Field Grade 1 and Strength Certification

Salary

• Salary is negotiable based on experience and ranges between $85,000-$110,000
• Bonus opportunities
• 401k plan
• Short-term and long-term disability benefits
• Life insurance
• Health, dental, and vision insurance
• Paid time off
• Paid holidays

What CRH Offers You

• Highly competitive base pay
• Comprehensive medical, dental and disability benefits programs
• Group retirement savings program
• Health and wellness programs
• An inclusive culture that values opportunity for growth, development, and internal promotion

About CRH

CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization.

If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!

Oldcastle Infrastructure, a CRH Company, is an Affirmative Action and Equal Opportunity Employer.

EOE/Vet/Disability

• CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.