Information Technology Jobs in Ct

Title
CNC Machinist - Turning 1st/2nd shift

About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.

Description

This position builds the operator's skills and knowledge to efficiently perform and maintain the manufacturing processes vertical and horizontal multi-axis turning machines to produce precision aerospace components.

Responsibilities:

• 
  
• Perform set up and operate vertical and horizontal multi-axis turning machinery as required with supervision.
  
• Use manual inspection equipment as required, e.g. height stands, micrometers, indicators, dial bores, verniers, etc.
  
• Work with aerospace materials such as aluminum, stainless steel, magnesium, titanium, and nickel alloys.
  
• Read/interpret operation sheets and work instructions.
  
• Adhere to established policies and company procedures and standard work.
  
• Participate in process improvement initiatives utilizing lean manufacturing tools and techniques.
  
• Document and communicate manufacturing performance issues to maintain continuity between shifts and decrease machine downtime.
  
• Maintain work areas and equipment in a clean and orderly condition.
  
• Follow all safety policies, rules and regulations.
  
• Other duties as assigned by Leads, Supervisors and/or Managers.
  

Physical Requirements:

• 
  
• Ability to stand or sit for extended period of time on a concrete manufacturing floor.
  
• Fine motor skills with frequent hand and arm movement.
  
• Ability to lift up to 50 pounds.
  
• Moderate twisting and bending.
  
• Moderate climbing on step stools or platforms.
  
• Unusual Environmental Conditions:
  
• Loud machining environment; exposure to aerospace metals, lubricants and chemicals.
  
• Required Personal Protective Equipment:
  
• Safety glasses/shields, appropriate manufacturing closed toed footwear, gloves, hearing protection may be required or other protective equipment as needed.
  

Qualifications:

• 
  
• US Citizen
  
• High School Diploma or equivalent.
  
• Technical school graduate in machining or two years of CNC experience.
  
• Aerospace experience preferred.
  
• Basic understanding of math or industrial mathematics.
  
• Good written and verbal skills.
  
• Basic computer skills.
  
• Ability to read technical drawings.
  
• Ability to set, use or setup various measuring devices.
  
• Solid problem solving skills.
  

Position Requirements

Shift
Various Shifts

Full-Time/Part-Time
Full-Time

Location
Applied Aerospace & Defense, Manchester

Category
Operations

Req Number
OPE-25-00003

Position
CNC Machinist - Turning

Close Date

Post Internal Days
0

Number of Openings
2

Exempt/Non-Exempt
Non-Exempt

Hiring Manager(s)
Lisa Czaja

This position is currently accepting applications.

Apply Now

Title
Final Inspector

About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.

Description

The Final Inspector position is primarily responsible for inspecting and recording dimensions of aerospace components per process sheets, Inspection reports, Blueprints and applicable specifications utilizing specified gages and methods to ensure the quality requirements are met prior to presenting the final aerospace component to the customers.

Responsibilities:

• 
  
• Review all raw material and processing certifications IAW Customer and PO requirements.
  
• Utilize Material Release database to document quality review/activities.
  
• Visual and dimensional verification (inspection) to requirements utilizing: micrometers, calipers, bore gages, thread gages, and other inspection equipment as required.
  
• Review and acceptance of Travelers to assure all sign-off complete and revision levels are to Operation Book Requirements.
  
• Presentation of inspected/received parts to various customer representatives and the resolution to any customer questions or concerns.
  
• Initiation of Discrepancy Reports, internal and external for products not meeting drawing requirements.
  
• Perform tasks as assigned by Supervisor and/or Team Leader.
  

Position Requirements

Physical Requirements:

• 
  
• Ability to lift 50 lbs.
  
• Ability to stand or sit for extended period of time.
  
• Fine motor skills with frequent hand and arm movement.
  
• Frequent twisting and bending.
  

Unusual Environmental Conditions:

• 
  
• Loud machining environment; exposure to aerospace metals, lubricants, and chemicals.
  

Required Personal Protective Equipment:

• 
  
• Safety glasses/shields, appropriate manufacturing closed toed footwear, hearing protection may be required or other protective equipment as needed.
  

Qualifications - Required

• 
  
• US Citizen
  
• High School Diploma or equivalent
  
• Minimum of 1 Year of Aerospace Inspection Experience
  
• Familiar with ISO / AS9100 requirements and/or Auditing Skills
  
• Basic math or industrial mathematics desired.
  
• Good written and verbal skills
  
• Basic computer skills
  
• Strong attention to detail and accuracy
  
• Strong problem-solving skills required
  
• Strong organizational skills required
  

Shift
Days

Full-Time/Part-Time
-unspecified-

Location
Applied Aerospace & Defense, Manchester

Category
Quality Control

Req Number
QUA-25-00032

Position
Final Inspector

Close Date

Post Internal Days
0

Number of Openings
1

Exempt/Non-Exempt
Non-Exempt

Hiring Manager(s)

This position is currently accepting applications.

Apply Now

Title
CNC Machinist (1st Shift)

About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.

Description

FUNCTION:

Set up, operate, troubleshoot and perform work on a variety of machinery. Be flexible, willing and capable of being trained on additional machines. Perform work at a consistently high level of quality. Be reliable in consistency of work and willingness to work outside of core area of expertise.

Position Requirements

TYPICAL DUTIES:

• 
  
• 
  

  Must be capable & willing to set up operations that have previously been proven out independently without oversight of a leadman or CNC programmer.

  
  
  

• 
  
• 
  

  Must be capable of running a minimum of two of the following machine types: 3 and 4 axis Horizontal and Vertical Machining Centers, 5 axis machining centers, Vertical Turret Lathes, Cylindrical Grinders, Mill/Turn machines, CNC boring machines, Horizontal lathes, manual machines.

  
  
  
• 
  
  

  Must be willing to perform work on machines throughout the shop, not only the machines that are within the person's core area of expertise. For example: must be willing to perform work on a Mitsubishi 4 axis machining center even when the person normally runs a Mazak 730 Variaxis.

  
  
  
• 
  

  Must be capable & willing to identify opportunities for improvement in tooling, cutting methods, mistake proofing & work instruction documentation.

  
  
  
• 
  

  Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.

  
  
  
• 
  

  Actively participate in various aspects of Continuous Improvement projects which may include but is not limited to 5S, TPM, kaizen events, and set-up reduction events, which is aligned with the commitment to continuous improvement activities in Article II of the collective bargaining agreement.

  
  
  
• 
  

  Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.

  
  
  
• 
  

  Must be capable & willing to assist or train other employees in this or lower classifications as needed.

  
  
  
• 
  
  

  Refer difficulties to leader or supervisor as appropriate

  
  
  

  May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.

  
  
  

Shift
-not applicable-

Full-Time/Part-Time
Full-Time

Location
Applied Aerospace & Defense, Newington

Category
Manufacturing

Req Number
MAN-26-00002

Position
All Around Machinist - A

Close Date

Post Internal Days
0

Number of Openings
1

Exempt/Non-Exempt
Non-Exempt

Hiring Manager(s)

This position is currently accepting applications.

Apply Now

Title
Lathe Machinists - 1st & 2nd Shifts

About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.

Description

**$2500 SIGN-ON BONUS**

Essential Duties & Responsibilities:

• 
  
• Set-up and operate Horizontal and Vertical CNC Lathes with Fanuc controls according to engineering specifications, instructions, GD&T and operation sheets. Knowledge of manual machines is a plus.
  
• Select appropriate cutting tools, fixtures and tool holders for a given job.
  
• Run similar jobs of short cycle times for extended periods of time where manufacturing processes are stable and do not require frequent change.
  
• Read and interpret engineering instructions, travelers, and blueprints and be familiar with geometric tolerances and principles.
  
• Operate more than one machine at a time, one to two machines depending on the nature of the job and its complexity, occasionally operating more than two machines depending on operator skill and familiarity with a given job.
  
• Must perform routine maintenance on assigned production equipment, i.e., maintain cleanliness of work area and machinery, check machinery fluids and alert maintenance personnel and/or supervisor of malfunctions.
  

Operate lifting and handling equipment such as hand truck, pallet jack, or overhead hoist to maneuver in-process or finished components to desired location.

Position Requirements

Required Knowledge, Skills, & Abilities:

• 
  
• Knowledgeable of in-process inspection techniques, standards, and requirements. Able to use and interpret precision measuring devices such as micrometers, verniers, and various hand tools, i.e., gauges to verify the accuracy of dimensional characteristics of components.
  
• Knowledge of metal characteristics in a production setting is desirable.
  
• Knowledge of programming code, canned cycles, threading & boring jaws and makes program edits.
  
• Machinists must have good verbal and written communication skills; good math skills and good interpersonal skills. Must work well with colleagues, supervision and management.
  

Education & Experience Required:

• 
  
• 7 - 10 years Vertical or Horizontal CNC Lathe machining experience in a manufacturing environment, preferably aerospace.
  
• Fully capable of reading, understanding, and following written and oral work instructions in English.
  
• Ability to lift or transfer components or objects of no more than 50 pounds.
  
• HS diploma or GED.
  

Shift
Various Shifts

Full-Time/Part-Time
Full-Time

Location
Applied Aerospace & Defense, Enfield

Category
Manufacturing

Req Number
SKI-22-00001

Position
Machinist - Lathe 2nd Shift

Close Date

Post Internal Days
0

Number of Openings
1

Exempt/Non-Exempt
Non-Exempt

Hiring Manager(s)
Paula Inglis

This position is currently accepting applications.

Apply Now

Title
Accounts Payable Specialist

About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.

Description

Client Organization Scope:

• 
  
• $150m+ Revenue
  
• 300+ vendors in AP system
  
• 80-85% of invoices are PO-related and require 3-way match
  
• Multi-site responsibility
  

Accountability:

Owns execution of full-cycle Accounts Payable process. Prepares and processes all accounts payable according to terms, resolving any discrepancies between PO/Receiver/Invoice as needed with limited supervision. Corporate Credit Card reconciliation and follow up on delinquent submissions.

Duties/responsibilities include, but are not limited to the following:

• 
  
• Must have experience in a Manufacturing environment
  
• Performs 3-way match of PO, receiver and invoices
  
• Contacts vendors as needed to request statements and resolve any issues or respond to their inquiries; Assists in resolution of complaints between vendor and customer
  
• Communicates with buyers on PO discrepancies
  
• Distributes non-PO invoices for approval
  
• Processes corporate purchasing credit cards
  
• Prepares weekly vendor payments by check and ACH; prepares Positive Pay and ACH files for uploading to bank site
  
• Controls check signatures and distribution to vendors
  
• Responsible for following up on outstanding "uncashed" checks
  
• Maintains W-9 documents for all vendors to accurately produce annual 1099s
  
• Assists with annual financial audits
  
• Assists accounting staff in the month end close process; ensure that all invoices are posted in the appropriate fiscal month and all invoices that have not yet been received are properly accrued for.
  
• Maintain accurate and complete records for all accounts payable transactions
  
• Participates in training and instruction as directed
  
• Reviews Accounts Payable Aging and Goods Received and Not Invoiced reports for accuracy maintaining GRNI under 90 days of receipt.
  

The above listed responsibilities are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all responsibilities or duties required. Incumbents will be expected to perform other duties as assigned.

Position Requirements

Qualifications:

• 
  
• Associate's Degree in Accounting or comparable work experience; 3+ years'
  
• Must have experience in a Manufacturing environment
  
• Minimum of 2 years of full-cycle Accounts Payable experience
  
• Proficiency in Microsoft Excel, Word and Outlook software applications, knowledge of Epicor a plus
  
• Working knowledge of chart of accounts for proper general ledger coding.
  
• Demonstrated time management skills with good attention to detail
  
• Ability to interact effectively with people at all levels of the organization
  
• Ability to work independently to identify and resolve exceptions and discrepancies
  

Shift
Days

Full-Time/Part-Time
Full-Time

Location
Applied Aerospace & Defense, Newington

Category
Accounting/Finance

Req Number
ACC-25-00007

Position
Accounts Payable Specialist

Close Date

Post Internal Days
0

Number of Openings
1

Exempt/Non-Exempt
Exempt

Hiring Manager(s)

This position is currently accepting applications.

Apply Now

Title
VTL Machinist (2nd Shift)

About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.

Description

Workign knowledge on VTL and Horizontal lathes. Troubleshoot machinery and programming issues to exceed production goals. Adjust offsets daily based on work orders and changing production needs. Monitor and adjust processes or equipment to improve quality and productivity.

• 
  
• Minimum 5 years of experience in set up of CNC vertical and horizontal Lathes.
  
• Must have knowledge in the use of precision measuring equipment and thickness gage instruments and their applications.
  
• A strong understanding in blueprint reading and geometric tolerancing interpretation.
  
• Intermediate knowledge of cutting tools, boring bars, inserts and tool holding devices associated with their function.
  
• The ability to follow planning and written instructions is a must.
  
• Must have excellent verbal and written communication skills.
  
• Must be able to adapt to changing work environment and have the ability to deal with frequent change and delays and or unexpected events.
  
• Must be willing to work flexible shifts and changing work schedules.
  
• Must have sufficient math skills that include the use of adding, subtracting, multiplication geometry, algebra required for fabrication of critical Aerospace components.
  
• CNC programming skills is a plus.
  
• Past experience with G & L or other VTL lathes.
  
• Must have experience with Fanuc controls.
  
• Must be flexible enough to perform duties as required by Management.
  

Responsibilities

• 
  
• Support operators on adjoining shifts with the loading and unloading of parts and fixtures to ensure a smooth transition of work and their instructions.
  
• Responsible for the setting of tool, offsets, simple edits as instructed by the programmer.
  
• Responsible for detecting and reporting of equipment malfunctions and possible out of tolerance conditions before they happen.
  
• Responsible for communication between departments ie, Quality, Production Control, to help resolve any Quality and or Programming concerns.
  
• Responsible for daily P.M. of machines to make sure machines being operated are in good working order.
  
• Responsible for maintaining clean and organized work area.
  
• Required to comply with company policies and procedures as well as all state and federal regulations.
  

Position Requirements

Shift
Nights

Full-Time/Part-Time
Full-Time

Location
Applied Aerospace & Defense, Newington

Category
Manufacturing

Req Number
MAN-26-00006

Position
VTL Machinist, 2nd Shift

Close Date

Post Internal Days
0

Number of Openings
1

Exempt/Non-Exempt
Non-Exempt

Hiring Manager(s)

This position is currently accepting applications.

Apply Now

Title
Production Planner

About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.

Description

The Production Planner will be responsible for the planning and scheduling of raw materials, jobs & operations (in house and outside) within an ERP environment and on the shop floor. This role will be responsible for ERP data integrity as well as the flow of the jobs throughout the manufacturing process.

Planner will also be required to achieve high level of customer product delivery (ship to commit) integrity while keeping minimum inventory level of finished goods and WIP.

Key responsibilities - other duties may be assigned:

• 
  
• Monitor MRP signals (Material buys, job release dates, overdue/exception notices).
  
• Review MPS/MRP and customer's online portals for demand forecast while maintaining Min/Max levels.
  
• Review material and outside vendor (OSV) processing requirements.
  
• Create, release and maintain material requisitions and jobs to meet customer demand.
  
• Submit and track status of Material and OSV requisitions; confirm PO creation.
  
• Create and release work orders; maintain work order accuracy (Engineering Changes (ECs), process changes, reprints, etc.).
  
• Coordinate with production, engineering, sales, purchasing & shipping/receiving to expedite the flow of work orders.
  
• Monitor and take immediate reschedule action in case of customer demand changes (push-out or pull-ins).
  
• Audit and maintain ERP system inventory data for accuracy, including cycle count program.
  
• Work with operations team to analyze work center load/capacity and schedule work accordingly.
  
• Provide monthly/weekly delivery commitments and ensure 100% commit integrity.
  
• Monitor finished goods inventory, work in progress and reduce levels to satisfy the company's target metrics.
  
• Execute inventory transactions from issuance of material to creation of finished goods shippers.
  
• Achieve high level of customer Percent On Time Delivery (%OTD) performance and minimize overdue/past due orders.
  
• Participate in continuous improvement and cost saving initiatives.
  

Position Requirements

Skills and qualifications:

• 
  
• A proactive team player with a background in production planning/scheduling and inventory control in a capacity-constrained system.
  
• Prior machine shop planning experience preferred, but not required. Some manufacturing planning experience beyond simple assembly is required.
  
• Knowledge and experience of MRP/ERP and schedule control in a data-driven environment.
  
• Proficient in MRP (Epicor preferred but not required)
  
• Must possess excellent reasoning and communication skills.
  
• This role requires a high level of energy, creating thinking and problem solving abilities.
  
• Ability to manage multiple tasks and establish effective work priorities
  
• Proficient in MS office
  

Education & Experience:

• 
  
• Bachelor's degree or high school diploma / GED and at least 3-5 years of experience in a production planning capacity or related aerospace experience
  

Shift
First

Full-Time/Part-Time
Full-Time

Location
Applied Aerospace & Defense, Enfield

Category
Manufacturing

Req Number
MAN-25-00024

Position
Production Control Planner

Close Date

Post Internal Days
0

Number of Openings
1

Exempt/Non-Exempt
Exempt

Hiring Manager(s)

This position is currently accepting applications.

Apply Now

Title
CNC Milling Machinist, 1st/2nd Shifts

About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.

Description

The CNC Milling Machine Operator builds the operator's skills and knowledge to efficiently perform and maintain the manufacturing processes vertical and horizontal multi-axis milling machines to produce precision aerospace components.

Responsibilities:

• 
  
• Operate vertical and horizontal multi-axis milling machinery as required with supervision.
  
• Use manual inspection equipment as required, e.g. height stands, micrometers, indicators, dial bores, verniers
  
• Work with aerospace materials such as aluminum, stainless steel, magnesium, titanium, and nickel alloys.
  
• Read/interpret operation sheets and work instructions.
  
• Adhere to established policies and company procedures and standard work.
  
• Participate in process improvement initiatives utilizing lean manufacturing tools and techniques.
  
• Document and communicate manufacturing performance issues to maintain continuity between shifts and decrease machine downtime.
  
• Maintain work areas and equipment in a clean and orderly condition.
  
• Follow all safety policies, rules and regulations.
  
• Other duties as assigned by Leads, Supervisors and/or Managers.
  

Physical Requirements:

• 
  
• Ability to stand or sit for extended period of time on a concrete manufacturing floor.
  
• Fine motor skills with frequent hand and arm movement.
  
• Ability to lift up to 50 pounds.
  
• Moderate twisting and bending.
  
• Moderate climbing on step stools or platforms.
  

Unusual Environmental Conditions:

• 
  
• Loud machining environment; exposure to aerospace metals, lubricants and chemicals.
  

Required Personal Protective Equipment:

• 
  
• Safety glasses/shields, appropriate manufacturing closed toed footwear, gloves, hearing protection may be required or other protective equipment as needed.
  

Qualifications:

• 
  
• US Citizen
  
• High School Diploma or equivalent.
  
• Technical school graduate in machining (desired)
  
• Minimum of 5 Years of Machining Experience.
  
• Strong machine setup skills.
  
• Aerospace experience required.
  
• Ability to work with tight tolerances.
  
• Strong industrial math skills, required.
  
• Strong written and verbal skills.
  
• Ability to read technical drawings.
  
• Ability to use and setup various measuring devices.
  
• Strong problem-solving skills.
  
• Lean basic knowledge i.e. 5S, setup reduction, TPM.
  
• Ability to read & interpret machining program language.
  

Position Requirements

Shift
Various Shifts

Full-Time/Part-Time
Full-Time

Location
Applied Aerospace & Defense, Manchester

Category
Manufacturing

Req Number
MAN-25-00001

Position
CNC Milling Machinist, 2nd Shift

Close Date

Post Internal Days
0

Number of Openings
3

Exempt/Non-Exempt
Non-Exempt

Hiring Manager(s)
Lisa Czaja

This position is currently accepting applications.

Apply Now

Overview:

Six Flags Entertainment Corporation is the world's largest regional theme park company with over 42 parks across North America. For more than 55 years, Six Flags has entertained millions of families with world-class coasters, themed rides, thrilling water parks, and unique attractions. With a culture built on safety, service, fun and friendliness, integrity, innovation, and results orientation, our mission at Six Flags New England is to create fun and thrills for all ages.

 

Pay Starting at $25.00/Hour

Responsibilities:

• Performing audits and inspections as directed by the Safety Department management
• Supporting and up-holding the mission, goals, and objectives of the Safety Department
• Providing quality basic life support care to include Basic Life Support (BLS) skills and Advanced Life Support (ALS) skills on patients in the pre-hospital setting as indicated by the MA Office of Emergency Medical Services regional and local treatment protocols, as observed or indicated on the BLS Patient Care Report
• Interacting with other EMS, Fire, and Police services as required to promote patient care and transportation
• Complying with departmental requirements regarding documentation, data input, and information handling
• Responding and assisting as directed in the Six Flags New England Emergency Response Guide
• Performing minor vehicle maintenance (fueling, fluid checks, air, washing, etc.) as required
• Enforcing all Six Flags New England policies
• Assisting in other areas of the Safety Department
• Performing other incidental and related duties as required and assigned

Qualifications:

• Current Massachusetts EMT – Paramedic Certification
• Current Advanced Life Support card
• Current MA licensed driver without serious moving violations
• Ability to interact in a professional and positive manner with large groups of people
• Friendly, outgoing personality, and the ability to address guest concerns
• Current MA licensed driver without serious moving violations
• Willing to work in a high performance team environment
• Willing to work a flexible schedule, including evenings, weekends, and holidays
• Able to meet the physical demands of the job, with or without reasonable accommodations, including walking long distances, standing for long periods of time, lifting, working at heights, etc.
• Able to communicate effectively in the English language, including the ability to read, speak, and understand the English language
• 18 years old or older

Overview:

For more than 55 years, Six Flags has entertained millions of families with world-class coasters, themed rides, thrilling water parks and unique attractions. With a culture built on safety, service, fun and friendliness, integrity, innovation, and results orientation, our mission at Six Flags New England is to create fun and thrills for all ages. 

 

Pay Starting at $15.75/Hour

Responsibilities:

• Talking with guests and addressing questions and concerns regarding park policies and procedures
• Resolving guest complaints in a friendly and professional manner
• Assisting guests with lost or misplaced season passes and operating the Six Flags Season Pass database
• Completing all required paperwork accurately
• Providing local area information and directions to guests
• Assisting with VIP Tours
• Enforcing all Six Flags New England policies
• Assisting in other areas of the Admissions department, including ticket taking, ticket selling, season pass processing, and toll operations
• Performing other incidental and related duties as required and assigned

Qualifications:

• Strong written and verbal communication skill in English
• Analytical problem-solving skills
• Positive attitude
• Superior phone etiquette
• Ability to work independently with little supervision
• Proficiency in computer skills including but not limited to Microsoft Office Programs and ability to learn new computer systems quickly
• Sense of fun!
• Willing to work in a high performance team environment
• Willing to work a flexible schedule, including evenings, weekends, and holidays
• Able to meet the physical demands of the job, with or without reasonable accommodations, including walking long distances, standing for long periods of time, lifting, working at heights, etc.
• Able to communicate effectively in the English language, including the ability to read, speak, and understand the English language
• 18 years old or older