Information Technology Jobs in Broad Brook, CT

This position builds the operator's skills and knowledge to efficiently perform and maintain the manufacturing processes vertical and horizontal multi-axis turning machines to produce precision aerospace components.

Responsibilities:

• 
  
• Perform set up and operate vertical and horizontal multi-axis turning machinery as required with supervision.
  
• Use manual inspection equipment as required, e.g. height stands, micrometers, indicators, dial bores, verniers, etc.
  
• Work with aerospace materials such as aluminum, stainless steel, magnesium, titanium, and nickel alloys.
  
• Read/interpret operation sheets and work instructions.
  
• Adhere to established policies and company procedures and standard work.
  
• Participate in process improvement initiatives utilizing lean manufacturing tools and techniques.
  
• Document and communicate manufacturing performance issues to maintain continuity between shifts and decrease machine downtime.
  
• Maintain work areas and equipment in a clean and orderly condition.
  
• Follow all safety policies, rules and regulations.
  
• Other duties as assigned by Leads, Supervisors and/or Managers.
  

Physical Requirements:

• 
  
• Ability to stand or sit for extended period of time on a concrete manufacturing floor.
  
• Fine motor skills with frequent hand and arm movement.
  
• Ability to lift up to 50 pounds.
  
• Moderate twisting and bending.
  
• Moderate climbing on step stools or platforms.
  
• Unusual Environmental Conditions:
  
• Loud machining environment; exposure to aerospace metals, lubricants and chemicals.
  
• Required Personal Protective Equipment:
  
• Safety glasses/shields, appropriate manufacturing closed toed footwear, gloves, hearing protection may be required or other protective equipment as needed.
  

Qualifications:

• 
  
• US Citizen
  
• High School Diploma or equivalent.
  
• Technical school graduate in machining or two years of CNC experience.
  
• Aerospace experience preferred.
  
• Basic understanding of math or industrial mathematics.
  
• Good written and verbal skills.
  
• Basic computer skills.
  
• Ability to read technical drawings.
  
• Ability to set, use or setup various measuring devices.
  
• Solid problem solving skills.
  

This position is currently accepting applications.

Apply Now

The Final Inspector position is primarily responsible for inspecting and recording dimensions of aerospace components per process sheets, Inspection reports, Blueprints and applicable specifications utilizing specified gages and methods to ensure the quality requirements are met prior to presenting the final aerospace component to the customers.

Responsibilities:

• 
  
• Review all raw material and processing certifications IAW Customer and PO requirements.
  
• Utilize Material Release database to document quality review/activities.
  
• Visual and dimensional verification (inspection) to requirements utilizing: micrometers, calipers, bore gages, thread gages, and other inspection equipment as required.
  
• Review and acceptance of Travelers to assure all sign-off complete and revision levels are to Operation Book Requirements.
  
• Presentation of inspected/received parts to various customer representatives and the resolution to any customer questions or concerns.
  
• Initiation of Discrepancy Reports, internal and external for products not meeting drawing requirements.
  
• Perform tasks as assigned by Supervisor and/or Team Leader.
  

Physical Requirements:

• 
  
• Ability to lift 50 lbs.
  
• Ability to stand or sit for extended period of time.
  
• Fine motor skills with frequent hand and arm movement.
  
• Frequent twisting and bending.
  

Unusual Environmental Conditions:

• 
  
• Loud machining environment; exposure to aerospace metals, lubricants, and chemicals.
  

Required Personal Protective Equipment:

• 
  
• Safety glasses/shields, appropriate manufacturing closed toed footwear, hearing protection may be required or other protective equipment as needed.
  

Qualifications - Required

• 
  
• US Citizen
  
• High School Diploma or equivalent
  
• Minimum of 1 Year of Aerospace Inspection Experience
  
• Familiar with ISO / AS9100 requirements and/or Auditing Skills
  
• Basic math or industrial mathematics desired.
  
• Good written and verbal skills
  
• Basic computer skills
  
• Strong attention to detail and accuracy
  
• Strong problem-solving skills required
  
• Strong organizational skills required
  

This position is currently accepting applications.

Apply Now

**$2500 SIGN-ON BONUS**

Essential Duties & Responsibilities:

• 
  
• Set-up and operate Horizontal and Vertical CNC Lathes with Fanuc controls according to engineering specifications, instructions, GD&T and operation sheets. Knowledge of manual machines is a plus.
  
• Select appropriate cutting tools, fixtures and tool holders for a given job.
  
• Run similar jobs of short cycle times for extended periods of time where manufacturing processes are stable and do not require frequent change.
  
• Read and interpret engineering instructions, travelers, and blueprints and be familiar with geometric tolerances and principles.
  
• Operate more than one machine at a time, one to two machines depending on the nature of the job and its complexity, occasionally operating more than two machines depending on operator skill and familiarity with a given job.
  
• Must perform routine maintenance on assigned production equipment, i.e., maintain cleanliness of work area and machinery, check machinery fluids and alert maintenance personnel and/or supervisor of malfunctions.
  

Operate lifting and handling equipment such as hand truck, pallet jack, or overhead hoist to maneuver in-process or finished components to desired location.

Required Knowledge, Skills, & Abilities:

• 
  
• Knowledgeable of in-process inspection techniques, standards, and requirements. Able to use and interpret precision measuring devices such as micrometers, verniers, and various hand tools, i.e., gauges to verify the accuracy of dimensional characteristics of components.
  
• Knowledge of metal characteristics in a production setting is desirable.
  
• Knowledge of programming code, canned cycles, threading & boring jaws and makes program edits.
  
• Machinists must have good verbal and written communication skills; good math skills and good interpersonal skills. Must work well with colleagues, supervision and management.
  

Education & Experience Required:

• 
  
• 7 - 10 years Vertical or Horizontal CNC Lathe machining experience in a manufacturing environment, preferably aerospace.
  
• Fully capable of reading, understanding, and following written and oral work instructions in English.
  
• Ability to lift or transfer components or objects of no more than 50 pounds.
  
• HS diploma or GED.
  

This position is currently accepting applications.

Apply Now

The Production Planner will be responsible for the planning and scheduling of raw materials, jobs & operations (in house and outside) within an ERP environment and on the shop floor. This role will be responsible for ERP data integrity as well as the flow of the jobs throughout the manufacturing process.

Planner will also be required to achieve high level of customer product delivery (ship to commit) integrity while keeping minimum inventory level of finished goods and WIP.

Key responsibilities - other duties may be assigned:

• 
  
• Monitor MRP signals (Material buys, job release dates, overdue/exception notices).
  
• Review MPS/MRP and customer's online portals for demand forecast while maintaining Min/Max levels.
  
• Review material and outside vendor (OSV) processing requirements.
  
• Create, release and maintain material requisitions and jobs to meet customer demand.
  
• Submit and track status of Material and OSV requisitions; confirm PO creation.
  
• Create and release work orders; maintain work order accuracy (Engineering Changes (ECs), process changes, reprints, etc.).
  
• Coordinate with production, engineering, sales, purchasing & shipping/receiving to expedite the flow of work orders.
  
• Monitor and take immediate reschedule action in case of customer demand changes (push-out or pull-ins).
  
• Audit and maintain ERP system inventory data for accuracy, including cycle count program.
  
• Work with operations team to analyze work center load/capacity and schedule work accordingly.
  
• Provide monthly/weekly delivery commitments and ensure 100% commit integrity.
  
• Monitor finished goods inventory, work in progress and reduce levels to satisfy the company's target metrics.
  
• Execute inventory transactions from issuance of material to creation of finished goods shippers.
  
• Achieve high level of customer Percent On Time Delivery (%OTD) performance and minimize overdue/past due orders.
  
• Participate in continuous improvement and cost saving initiatives.
  

Skills and qualifications:

• 
  
• A proactive team player with a background in production planning/scheduling and inventory control in a capacity-constrained system.
  
• Prior machine shop planning experience preferred, but not required. Some manufacturing planning experience beyond simple assembly is required.
  
• Knowledge and experience of MRP/ERP and schedule control in a data-driven environment.
  
• Proficient in MRP (Epicor preferred but not required)
  
• Must possess excellent reasoning and communication skills.
  
• This role requires a high level of energy, creating thinking and problem solving abilities.
  
• Ability to manage multiple tasks and establish effective work priorities
  
• Proficient in MS office
  

Education & Experience:

• 
  
• Bachelor's degree or high school diploma / GED and at least 3-5 years of experience in a production planning capacity or related aerospace experience
  

This position is currently accepting applications.

Apply Now

The CNC Milling Machine Operator builds the operator's skills and knowledge to efficiently perform and maintain the manufacturing processes vertical and horizontal multi-axis milling machines to produce precision aerospace components.

Responsibilities:

• 
  
• Operate vertical and horizontal multi-axis milling machinery as required with supervision.
  
• Use manual inspection equipment as required, e.g. height stands, micrometers, indicators, dial bores, verniers
  
• Work with aerospace materials such as aluminum, stainless steel, magnesium, titanium, and nickel alloys.
  
• Read/interpret operation sheets and work instructions.
  
• Adhere to established policies and company procedures and standard work.
  
• Participate in process improvement initiatives utilizing lean manufacturing tools and techniques.
  
• Document and communicate manufacturing performance issues to maintain continuity between shifts and decrease machine downtime.
  
• Maintain work areas and equipment in a clean and orderly condition.
  
• Follow all safety policies, rules and regulations.
  
• Other duties as assigned by Leads, Supervisors and/or Managers.
  

Physical Requirements:

• 
  
• Ability to stand or sit for extended period of time on a concrete manufacturing floor.
  
• Fine motor skills with frequent hand and arm movement.
  
• Ability to lift up to 50 pounds.
  
• Moderate twisting and bending.
  
• Moderate climbing on step stools or platforms.
  

Unusual Environmental Conditions:

• 
  
• Loud machining environment; exposure to aerospace metals, lubricants and chemicals.
  

Required Personal Protective Equipment:

• 
  
• Safety glasses/shields, appropriate manufacturing closed toed footwear, gloves, hearing protection may be required or other protective equipment as needed.
  

Qualifications:

• 
  
• US Citizen
  
• High School Diploma or equivalent.
  
• Technical school graduate in machining (desired)
  
• Minimum of 5 Years of Machining Experience.
  
• Strong machine setup skills.
  
• Aerospace experience required.
  
• Ability to work with tight tolerances.
  
• Strong industrial math skills, required.
  
• Strong written and verbal skills.
  
• Ability to read technical drawings.
  
• Ability to use and setup various measuring devices.
  
• Strong problem-solving skills.
  
• Lean basic knowledge i.e. 5S, setup reduction, TPM.
  
• Ability to read & interpret machining program language.
  

This position is currently accepting applications.

Apply Now

Job Title: IT and Media Specialist 

Reports to: Director of Wellness 

FLSA Status: Part-time, up to 24 hours per week, flexible based on event schedules and logistical requirements. 

Compensation: $17-20 BOE 

Location: Onsite, 24 Tabor Crossing Longmeadow, MA 01106 

Summary  

Glenmeadow is seeking a tech-savvy IT and Media Specialist. This role helps Glenmeadow residents stay connected through technology and ensures smooth audio/visual operations for programs and events. This position requires a problem-solving mindset, an authentic desire to work with older adults, and a commitment to supporting meaningful community experiences.  

Essential Duties and Responsibilities 

Resident IT Support  

• Provide hands-on assistance to residents with basic technology needs (e.g., smartphones, tablets, computers, email, video calls).  
• Troubleshoot common hardware and software issues in a friendly, patient manner.  
• Offer guidance on digital literacy and safe internet practices.  

Event A/V Support  

• Set up and operate microphones, speakers, projectors, and other A/V equipment for programs and events.  
• Manage video recording and live streaming for select events.  
• Coordinate with program staff to ensure smooth technical execution, including troubleshooting during events.  
• Perform routine checks and maintenance on A/V equipment.  

Knowledge Skills and Abilities 

• Basic knowledge of IT troubleshooting (Windows, iOS, Android).  
• Familiarity with audio/visual equipment and live streaming platforms.  
• Strong communication and interpersonal skills  
• Ability to work patiently with older adults 
• Ability to lift and move equipment as needed 
• Flexible schedule, including occasional evenings or weekends for events 

Education and Experience  

• Experience in senior living or nonprofit settings 
• Knowledge of Zoom, YouTube Live, or similar streaming tools 
• Basic video editing skills a plus 

Our team is growing, and we’re looking for top-caliber Physical Therapists to join us in Coventry, Middletown, Vernon, Windsor, Southington, Enfield, Hartford and 

Wethersfield, CT.

Why FOX Rehabilitation? 

• Pioneer of Geriatric House Calls™ to older adults in their communities. 

• Provide physical therapy services in a 1:1 setting to help abolish ageism. 

• Drive rewarding patient outcomes. 

• Facilitate clinically-excellent autonomous interventions.  

• Benefit from the flexibility to create, control, and alter your treatment schedule.  

• Be a part of an Interdisciplinary approach by a therapy team focused on functional outcomes. 

Available Opportunities:  

• Full-time/Part-time – Salaried with benefits 

• PRN/Flex – PPU (Paid Per Unit) 

• H1B - Able to provide sponsorship to those who need it that are qualified 

• New Grads-FOX offers a widely recognized Emerging Professionals Mentor Program!  

What you’ll get:  

• Clinical and non-clinical career growth opportunities  

• Supportive Clinical Community 

• Unlimited access to continuing education  

• Professional Certification Reimbursement  

• Access to cutting-edge technology  

• Medical, Dental, Vision, 401k (for those who qualify)  

 What you’ll need:  

• Valid Physical Therapy license in the state(s) of practice, or eligibility to apply  

• Degree from an accredited physical therapy program  

• Basic computer literacy skills  

• Current CPR certification  

Who is FOX? FOX is a primarily clinician-operated, professional private practice of full-time physical, occupational, and speech therapists, built on the foundation of Geriatric House Calls™. Our one-on-one care fosters a rewarding environment, and therapists have the flexibility to shape their schedules for a successful work-life balance. Empowered by clinicians, FOX advocates for our people and believes in their significant contributions to our professional society. 

Contact FOX Now! 

Suzanne Nicar - Clinical Talent Acquisition Specialist

6

You can also text FOX to 6 to learn more!

#LI-SN1

FOX Rehabilitation is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Pharmacy Director Career Opportunity

Acknowledge and Appreciate for Your Expertise as Pharmacy Director
Are you a passionate Pharmacy Director eager to excel in a fulfilling career close to home and close to your heart? Encompass Health, the nation's largest in-patient rehabilitation company, invites you to explore an opportunity that aligns with your commitment to enhancing healthcare in your local community. In this critical role, you will ensure the safe and efficient provision of pharmacy services, leading a team with cutting-edge equipment and technology. Join us on a journey that not only advances your professional goals but also provides a warm, supportive team environment, along with a comprehensive benefits package from day one.

A Glimpse into Our World
At Encompass Health, you'll experience the difference the moment you become a part of our team. Being at Encompass Health means aligning with a rapidly growing national inpatient rehabilitation leader. We take pride in the growth opportunities we offer and how our team unites for the greater good of our patients. Our achievements include being named one of the "World's Most Admired Companies" and receiving the Fortune 100 Best Companies to Work For® Award, among other accolades, which is nothing short of amazing.

Starting Perks and Benefits
At Encompass Health, we are committed to creating a supportive, inclusive, and caring environment where you can thrive. From day one, you will have access to:

• Affordable medical, dental, and vision plans for both full-time and part-time employees and their families.
• Generous paid time off that accrues over time.
• Opportunities for tuition reimbursement and continuing education.
• Company-matching 401(k) and employee stock purchase plans.
• Flexible spending and health savings accounts.
• A vibrant community of individuals passionate about the work they do!

Be the Pharmacy Director You've Always Strived to Be

• Convey the mission of the hospital and organization to pharmacy staff, holding them accountable for performance, while motivating them to enhance and develop their capabilities.
• Oversee the pharmacy department's operations, including scheduling, continuous assessment, and the implementation of process improvements to optimize department performance.
• Provide direct patient and pharmaceutical care.
• Demonstrate and maintain competence in clinical health system pharmacy practices, including antimicrobial stewardship, non-sterile and sterile drug preparation, controlled substances, hospital pharmacy accreditation, anticoagulation drug therapy management, and medication safety.
• Educate staff on pharmaceutical care and medication management, ensuring the pharmacy consistently complies with local, state, and national regulations.
• Stay current with new medications, indications, and evidence-based medicine. Collaborate with the
• Controller to prepare and manage departmental budgets for staffing, drugs, and supplies.
• Actively serve and lead various hospital committees, including Quality Assurance, Formulary,
• Pharmacy and Therapeutics, MEC, and Safety, as needed.
• Celebrate the achievements and victories of our dedicated employees along the way.
  

Qualifications

• Licensed in good standing by the State Pharmacy Board for the state where the hospital is located.
• Successful completion of a degree from an accredited pharmacy program or one recognized as substantially equivalent to a U.S. accredited program by an appropriate certifying agency.
• A minimum of 2 years of supervisory experience.
• May be required to work weekdays and/or weekends, evenings and or night shifts.
• May be required to work on religious and/or legal holidays on scheduled days/shifts.

#LI-TR1

Our team is growing, and we're looking for top-caliber Physical Therapists to join us in Coventry, Middletown, Vernon, Windsor , Southington, Enfield, Hartford and

Wethersfield, CT.

Why FOX Rehabilitation?

• Pioneer of Geriatric House Calls to older adults in their communities.

• Provide physical therapy services in a 1:1 setting to help abolish ageism.

• Drive rewarding patient outcomes.

• Facilitate clinically-excellent autonomous interventions.

• Benefit from the flexibility to create, control, and alter your treatment schedule.

• Be a part of an Interdisciplinary approach by a therapy team focused on functional outcomes.

Available Opportunities:

• Full-time/Part-time - Salaried with benefits

• PRN/Flex - PPU (Paid Per Unit)

• H1B - Able to provide sponsorship to those who need it that are qualified

• New Grads-FOX offers a widely recognized Emerging Professionals Mentor Program!

What you'll get:

• Clinical and non-clinical career growth opportunities

• Supportive Clinical Community

• Unlimited access to continuing education

• Professional Certification Reimbursement

• Access to cutting-edge technology

• Medical, Dental, Vision, 401k (for those who qualify)

What you'll need:

• Valid Physical Therapy license in the state(s) of practice, or eligibility to apply

• Degree from an accredited physical therapy program

• Basic computer literacy skills

• Current CPR certification

Who is FOX? FOX is a primarily clinician-operated, professional private practice of full-time physical, occupational, and speech therapists, built on the foundation of Geriatric House Calls . Our one-on-one care fosters a rewarding environment, and therapists have the flexibility to shape their schedules for a successful work-life balance. Empowered by clinicians, FOX advocates for our people and believes in their significant contributions to our professional society.

Contact FOX Now!

Suzanne Nicar - Clinical Talent Acquisition Specialist

You can also text FOX to to learn more!

FOX Rehabilitation is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.