Information Technology Jobs in Bothell Washington Flexible

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• A ble to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :  

• This position is for a variety of shifts   

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• A ble to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :  

• This position is for a variety of shifts   

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Power Plant B to become part of our Join and Installation team in Everett and Kent, Washington.

Join our dynamic team as an Assembler Power Plant B, where your skills will be pivotal in constructing and assembling critical aircraft components. In this essential role, you will utilize production drawings and specifications to accurately install, fit, and align parts for power packs and strut assemblies. Your attention to detail will ensure that each component is meticulously drilled, reamed, and riveted, while your expertise in pre-assembly will streamline the process for wiring harnesses and tubing assemblies. You will operate advanced material handling equipment to efficiently load and unload engines and struts. Your ability to verify dimensions and check for defects will be crucial in maintaining our commitment to excellence. If you are passionate about aviation and thrive in a collaborative environment, we invite you to contribute to our mission of delivering high-quality aircraft systems.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Install, fit, fasten, align, adjust, and connect parts and assemblies to build aircraft power packs and strut assemblies.

• Use production drawings, specifications, and assembly pages to derive measurements and locate points for part marking and layout preparation.

• Perform drilling, reaming, riveting, and soldering necessary for assembly tasks.

• Review work orders and installation plans to determine job priorities and obtain appropriate drawings and production illustrations.

• Obtain and verify kitted detail parts and assemblies, ensuring they are correct and free of defects.

• Pre-assemble components such as wiring harnesses and tubing assemblies using power and hand tools.

• Operate material handling equipment, including overhead cranes and scissor lifts, to load and unload engines and struts.

• Align parts and assemblies to mating surfaces, temporarily securing them in place and checking for proper alignment.

• Attach, seal, and connect parts, assemblies, and wires using the correct fasteners and tools, tightening per specifications.

• Torque fasteners and install safety devices such as lock wires and cotter pins as required by drawings or specifications.

• Seal hydraulic fittings and access doors, applying necessary fluids, primers, and adhesives according to specifications.

• Operate various tools, including pull rivet guns and countersinks, to fasten and torque parts and assemblies.

• Verify close tolerance dimensions using precision measuring tools and check work for defects before inspection.

• Maintain personal and tool certifications, ensuring compliance with safety and operational standards.

• Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed, while consulting with engineering and planning as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Do you meet this requirement?

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.

• 1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to lift up to 35 pounds.

• This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• 1+ years of experience performing aircraft structural work or equivalate.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program

Conflict of Interest:  

• Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

• High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

• Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

• This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Safety Sensitive Statement:

• This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay : $25.00/hour, with potential to earn up to $55.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Join Our Team as a Website Tester at Little Wheel

Little Wheel is a gambling technology company focused on researching and building products that put players first. We are currently hiring Website Testers across Michigan, New Jersey, Pennsylvania, and West Virginia.

This is a great opportunity to earn extra income on a flexible schedule while helping us test online casinos. No prior experience is required, and all training is provided.

This is a short-term contract, with opportunities for ongoing work for high performers.

Role Overview

As a Website Tester, you will:

• Participate in user experience testing on various online casino platforms.
• Follow step-by-step instructions to complete assigned tasks.
• Record feedback and report bugs or usability issues.
• Provide detailed insights into your testing experience.
• Complete all testing assignments within set timelines.

Requirements

To be eligible, you must:

• Be at least 21 years old.
• Reside in one of the following states: Michigan, New Jersey, Pennsylvania, or West Virginia.
• Own a laptop or desktop computer.
• Be able to complete a short, paid online training and onboarding process.

No previous testing or gambling experience is needed. You will not be gambling with your own money, and there are no fees or out-of-pocket costs. All the interactions/game-play would be for testing purposes.

Compensation and Benefits

• Guaranteed earnings of at least $1,000 for approximately 20 hours of testing.
• Minimum of $25/hour, with higher pay for faster testers.
• $100 bonus upon completing the onboarding program.
• Flexible schedule – choose when you want to work.
• Work from home – test websites from the comfort of your own space.
• Fast payments – get paid after each of the 4 testing stages.
• Excellent support – coordinators available daily from 6 AM to 11 PM ET.

What Our Testers Say

"Great side gig for some extra cash. The team is very communicative and will answer any questions/concerns!" – Maria, Trustpilot (2021)

"Tasks are clearly explained with step-by-step instructions. You can work when it's convenient. Support is very helpful and responsive." – Anonymous, Glassdoor (2025)

Read more reviews on Glassdoor, Trustpilot, and Google.

Equal Opportunity Statement

Little Wheel LLC is proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment for all applicants and employees, regardless of race, religion, color, national origin, gender identity, sexual orientation, age, disability, or veteran status. We celebrate diversity and strive to create a workplace where everyone feels valued.

Company Info

Website: Address: Little Wheel LLC, 250 Pehle Ave, Suite 200, Saddle Brook, NJ 07663 Phone: (833) 313-7490

Join Our Team as a Website Tester at Little Wheel

Little Wheel is a gambling technology company focused on researching and building products that put players first. We are currently hiring Website Testers across Michigan, New Jersey, Pennsylvania, and West Virginia.

This is a great opportunity to earn extra income on a flexible schedule while helping us test online casinos. No prior experience is required, and all training is provided.

This is a short-term contract, with opportunities for ongoing work for high performers.

Role Overview

As a Website Tester, you will:

• Participate in user experience testing on various online casino platforms.
• Follow step-by-step instructions to complete assigned tasks.
• Record feedback and report bugs or usability issues.
• Provide detailed insights into your testing experience.
• Complete all testing assignments within set timelines.

Requirements

To be eligible, you must:

• Be at least 21 years old.
• Reside in one of the following states: Michigan, New Jersey, Pennsylvania, or West Virginia.
• Own a laptop or desktop computer.
• Be able to complete a short, paid online training and onboarding process.

No previous testing or gambling experience is needed. You will not be gambling with your own money, and there are no fees or out-of-pocket costs. All the interactions/game-play would be for testing purposes.

Compensation and Benefits

• Guaranteed earnings of at least $1,000 for approximately 20 hours of testing.
• Minimum of $25/hour, with higher pay for faster testers.
• $100 bonus upon completing the onboarding program.
• Flexible schedule – choose when you want to work.
• Work from home – test websites from the comfort of your own space.
• Fast payments – get paid after each of the 4 testing stages.
• Excellent support – coordinators available daily from 6 AM to 11 PM ET.

What Our Testers Say

"Great side gig for some extra cash. The team is very communicative and will answer any questions/concerns!" – Maria, Trustpilot (2021)

"Tasks are clearly explained with step-by-step instructions. You can work when it's convenient. Support is very helpful and responsive." – Anonymous, Glassdoor (2025)

Read more reviews on Glassdoor, Trustpilot, and Google.

Equal Opportunity Statement

Little Wheel LLC is proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment for all applicants and employees, regardless of race, religion, color, national origin, gender identity, sexual orientation, age, disability, or veteran status. We celebrate diversity and strive to create a workplace where everyone feels valued.

Company Info

Website: Address: Little Wheel LLC, 250 Pehle Ave, Suite 200, Saddle Brook, NJ 07663 Phone: (833) 313-7490

Join Our Team as a Website Tester at Little Wheel

Little Wheel is a gambling technology company focused on researching and building products that put players first. We are currently hiring Website Testers across Michigan, New Jersey, Pennsylvania, and West Virginia.

This is a great opportunity to earn extra income on a flexible schedule while helping us test online casinos. No prior experience is required, and all training is provided.

This is a short-term contract, with opportunities for ongoing work for high performers.

Role Overview

As a Website Tester, you will:

• Participate in user experience testing on various online casino platforms.
• Follow step-by-step instructions to complete assigned tasks.
• Record feedback and report bugs or usability issues.
• Provide detailed insights into your testing experience.
• Complete all testing assignments within set timelines.

Requirements

To be eligible, you must:

• Be at least 21 years old.
• Reside in one of the following states: Michigan, New Jersey, Pennsylvania, or West Virginia.
• Own a laptop or desktop computer.
• Be able to complete a short, paid online training and onboarding process.

No previous testing or gambling experience is needed. You will not be gambling with your own money, and there are no fees or out-of-pocket costs. All the interactions/game-play would be for testing purposes.

Compensation and Benefits

• Guaranteed earnings of at least $1,000 for approximately 20 hours of testing.
• Minimum of $25/hour, with higher pay for faster testers.
• $100 bonus upon completing the onboarding program.
• Flexible schedule – choose when you want to work.
• Work from home – test websites from the comfort of your own space.
• Fast payments – get paid after each of the 4 testing stages.
• Excellent support – coordinators available daily from 6 AM to 11 PM ET.

What Our Testers Say

"Great side gig for some extra cash. The team is very communicative and will answer any questions/concerns!" – Maria, Trustpilot (2021)

"Tasks are clearly explained with step-by-step instructions. You can work when it's convenient. Support is very helpful and responsive." – Anonymous, Glassdoor (2025)

Read more reviews on Glassdoor, Trustpilot, and Google.

Equal Opportunity Statement

Little Wheel LLC is proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment for all applicants and employees, regardless of race, religion, color, national origin, gender identity, sexual orientation, age, disability, or veteran status. We celebrate diversity and strive to create a workplace where everyone feels valued.

Company Info

Website: Address: Little Wheel LLC, 250 Pehle Ave, Suite 200, Saddle Brook, NJ 07663 Phone: (833) 313-7490

Join Our Team as a Website Tester at Little Wheel

Little Wheel is a gambling technology company focused on researching and building products that put players first. We are currently hiring Website Testers across Michigan, New Jersey, Pennsylvania, and West Virginia.

This is a great opportunity to earn extra income on a flexible schedule while helping us test online casinos. No prior experience is required, and all training is provided.

This is a short-term contract, with opportunities for ongoing work for high performers.

Role Overview

As a Website Tester, you will:

• Participate in user experience testing on various online casino platforms.
• Follow step-by-step instructions to complete assigned tasks.
• Record feedback and report bugs or usability issues.
• Provide detailed insights into your testing experience.
• Complete all testing assignments within set timelines.

Requirements

To be eligible, you must:

• Be at least 21 years old.
• Reside in one of the following states: Michigan, New Jersey, Pennsylvania, or West Virginia.
• Own a laptop or desktop computer.
• Be able to complete a short, paid online training and onboarding process.

No previous testing or gambling experience is needed. You will not be gambling with your own money, and there are no fees or out-of-pocket costs. All the interactions/game-play would be for testing purposes.

Compensation and Benefits

• Guaranteed earnings of at least $1,000 for approximately 20 hours of testing.
• Minimum of $25/hour, with higher pay for faster testers.
• $100 bonus upon completing the onboarding program.
• Flexible schedule – choose when you want to work.
• Work from home – test websites from the comfort of your own space.
• Fast payments – get paid after each of the 4 testing stages.
• Excellent support – coordinators available daily from 6 AM to 11 PM ET.

What Our Testers Say

"Great side gig for some extra cash. The team is very communicative and will answer any questions/concerns!" – Maria, Trustpilot (2021)

"Tasks are clearly explained with step-by-step instructions. You can work when it's convenient. Support is very helpful and responsive." – Anonymous, Glassdoor (2025)

Read more reviews on Glassdoor, Trustpilot, and Google.

Equal Opportunity Statement

Little Wheel LLC is proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment for all applicants and employees, regardless of race, religion, color, national origin, gender identity, sexual orientation, age, disability, or veteran status. We celebrate diversity and strive to create a workplace where everyone feels valued.

Company Info

Website: Address: Little Wheel LLC, 250 Pehle Ave, Suite 200, Saddle Brook, NJ 07663 Phone: (833) 313-7490

Join Our Team as a Website Tester at Little Wheel

Little Wheel is a gambling technology company focused on researching and building products that put players first. We are currently hiring Website Testers across Michigan, New Jersey, Pennsylvania, and West Virginia.

This is a great opportunity to earn extra income on a flexible schedule while helping us test online casinos. No prior experience is required, and all training is provided.

This is a short-term contract, with opportunities for ongoing work for high performers.

Role Overview

As a Website Tester, you will:

• Participate in user experience testing on various online casino platforms.
• Follow step-by-step instructions to complete assigned tasks.
• Record feedback and report bugs or usability issues.
• Provide detailed insights into your testing experience.
• Complete all testing assignments within set timelines.

Requirements

To be eligible, you must:

• Be at least 21 years old.
• Reside in one of the following states: Michigan, New Jersey, Pennsylvania, or West Virginia.
• Own a laptop or desktop computer.
• Be able to complete a short, paid online training and onboarding process.

No previous testing or gambling experience is needed. You will not be gambling with your own money, and there are no fees or out-of-pocket costs. All the interactions/game-play would be for testing purposes.

Compensation and Benefits

• Guaranteed earnings of at least $1,000 for approximately 20 hours of testing.
• Minimum of $25/hour, with higher pay for faster testers.
• $100 bonus upon completing the onboarding program.
• Flexible schedule – choose when you want to work.
• Work from home – test websites from the comfort of your own space.
• Fast payments – get paid after each of the 4 testing stages.
• Excellent support – coordinators available daily from 6 AM to 11 PM ET.

What Our Testers Say

"Great side gig for some extra cash. The team is very communicative and will answer any questions/concerns!" – Maria, Trustpilot (2021)

"Tasks are clearly explained with step-by-step instructions. You can work when it's convenient. Support is very helpful and responsive." – Anonymous, Glassdoor (2025)

Read more reviews on Glassdoor, Trustpilot, and Google.

Equal Opportunity Statement

Little Wheel LLC is proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment for all applicants and employees, regardless of race, religion, color, national origin, gender identity, sexual orientation, age, disability, or veteran status. We celebrate diversity and strive to create a workplace where everyone feels valued.

Company Info

Website: Address: Little Wheel LLC, 250 Pehle Ave, Suite 200, Saddle Brook, NJ 07663 Phone: (833) 313-7490