Information Technology Jobs in Bothell Snohomish County, WA

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Power Plant B to become part of our Join and Installation team in Everett and Kent, Washington.

Join our dynamic team as an Assembler Power Plant B, where your skills will be pivotal in constructing and assembling critical aircraft components. In this essential role, you will utilize production drawings and specifications to accurately install, fit, and align parts for power packs and strut assemblies. Your attention to detail will ensure that each component is meticulously drilled, reamed, and riveted, while your expertise in pre-assembly will streamline the process for wiring harnesses and tubing assemblies. You will operate advanced material handling equipment to efficiently load and unload engines and struts. Your ability to verify dimensions and check for defects will be crucial in maintaining our commitment to excellence. If you are passionate about aviation and thrive in a collaborative environment, we invite you to contribute to our mission of delivering high-quality aircraft systems.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Install, fit, fasten, align, adjust, and connect parts and assemblies to build aircraft power packs and strut assemblies.

• Use production drawings, specifications, and assembly pages to derive measurements and locate points for part marking and layout preparation.

• Perform drilling, reaming, riveting, and soldering necessary for assembly tasks.

• Review work orders and installation plans to determine job priorities and obtain appropriate drawings and production illustrations.

• Obtain and verify kitted detail parts and assemblies, ensuring they are correct and free of defects.

• Pre-assemble components such as wiring harnesses and tubing assemblies using power and hand tools.

• Operate material handling equipment, including overhead cranes and scissor lifts, to load and unload engines and struts.

• Align parts and assemblies to mating surfaces, temporarily securing them in place and checking for proper alignment.

• Attach, seal, and connect parts, assemblies, and wires using the correct fasteners and tools, tightening per specifications.

• Torque fasteners and install safety devices such as lock wires and cotter pins as required by drawings or specifications.

• Seal hydraulic fittings and access doors, applying necessary fluids, primers, and adhesives according to specifications.

• Operate various tools, including pull rivet guns and countersinks, to fasten and torque parts and assemblies.

• Verify close tolerance dimensions using precision measuring tools and check work for defects before inspection.

• Maintain personal and tool certifications, ensuring compliance with safety and operational standards.

• Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed, while consulting with engineering and planning as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Do you meet this requirement?

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.

• 1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to lift up to 35 pounds.

• This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• 1+ years of experience performing aircraft structural work or equivalate.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program

Conflict of Interest:  

• Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

• High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

• Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

• This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Safety Sensitive Statement:

• This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay : $25.00/hour, with potential to earn up to $55.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Power Plant B to become part of our Join and Installation team in Everett and Kent, Washington.

Join our dynamic team as an Assembler Power Plant B, where your skills will be pivotal in constructing and assembling critical aircraft components. In this essential role, you will utilize production drawings and specifications to accurately install, fit, and align parts for power packs and strut assemblies. Your attention to detail will ensure that each component is meticulously drilled, reamed, and riveted, while your expertise in pre-assembly will streamline the process for wiring harnesses and tubing assemblies. You will operate advanced material handling equipment to efficiently load and unload engines and struts. Your ability to verify dimensions and check for defects will be crucial in maintaining our commitment to excellence. If you are passionate about aviation and thrive in a collaborative environment, we invite you to contribute to our mission of delivering high-quality aircraft systems.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Install, fit, fasten, align, adjust, and connect parts and assemblies to build aircraft power packs and strut assemblies.

• Use production drawings, specifications, and assembly pages to derive measurements and locate points for part marking and layout preparation.

• Perform drilling, reaming, riveting, and soldering necessary for assembly tasks.

• Review work orders and installation plans to determine job priorities and obtain appropriate drawings and production illustrations.

• Obtain and verify kitted detail parts and assemblies, ensuring they are correct and free of defects.

• Pre-assemble components such as wiring harnesses and tubing assemblies using power and hand tools.

• Operate material handling equipment, including overhead cranes and scissor lifts, to load and unload engines and struts.

• Align parts and assemblies to mating surfaces, temporarily securing them in place and checking for proper alignment.

• Attach, seal, and connect parts, assemblies, and wires using the correct fasteners and tools, tightening per specifications.

• Torque fasteners and install safety devices such as lock wires and cotter pins as required by drawings or specifications.

• Seal hydraulic fittings and access doors, applying necessary fluids, primers, and adhesives according to specifications.

• Operate various tools, including pull rivet guns and countersinks, to fasten and torque parts and assemblies.

• Verify close tolerance dimensions using precision measuring tools and check work for defects before inspection.

• Maintain personal and tool certifications, ensuring compliance with safety and operational standards.

• Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed, while consulting with engineering and planning as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Do you meet this requirement?

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.

• 1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to lift up to 35 pounds.

• This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• 1+ years of experience performing aircraft structural work or equivalate.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program

Conflict of Interest:  

• Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

• High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

• Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

• This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Safety Sensitive Statement:

• This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay : $25.00/hour, with potential to earn up to $55.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

• Experienced CDL-A tanker and bulk transport drivers
• Semi-regional routes
• Home most nights

GREAT PAY PACKAGE

• Earn $325 per day, depending on experience
• Earn $1,424.64 - $2,529.19 per week depending on experience, routes, regular attendance and length of service
• Full pay package also includes other accessorial compensation to include stop pay, detention pay, safety bonuses and border crossing pay as appropriate.

PAID ORIENTATION

• We host you in our office in Spokane, Washington. Airfare, single-occupancy room, breakfast, and lunch are all on us! Dinner is your time to explore what Spokane has to offer.
• Arrive Monday, and get your truck by Saturday. Its that easy!

EXCELLENT BENEFITS

• Medical/dental/401(k)
• Benefits are available to enroll in after the eligibility waiting period has been met
• Long and Short-term disability
• Health savings account
• 401(k) with match
• Employee assistance program
• Life insurance
• $1,800 transition package
• Accrue 1 hour of sick time per 30 hours worked, then 1-9 years get 80 hours PTO, 10+ years get 120 hours PTO
• And much more!

THE RIGHT TOOLS FOR THE JOB

• Our trailer fleet is thoroughly maintained and with over 5 different classes, we have the right equipment for you to get the job done!
• Every truck is outfitted with the latest safety and satellite technology
• 24/7/365 road service staff & shops
• If a truck needs repairs, it's not going out until it is 100% ready to hit the road again safely with you at the wheel, You can count on that!

PET POLICY + GUEST RIDER POLICY

• James J. Williams does not allow pets
• James J. Williams does not allow guest riders

Do you have a CDL-A? Have a Hazmat Certification? Drive for James J. Williams, and receive great pay packages and excellent benefits like; transition and orientation pay, vacation time, regular home time, medical and dental, 401K, and so much more. James J. Williams has been hauling what builds America since 1926! Today, we are still keeping the country running with great drivers like you behind the wheel. Your experience matters. Come drive with us!

• REQUIRED: Must have a valid Class A CDL
• REQUIRED: Must have HAZMAT certification
• REQUIRED: Must be 21 years of age or older
• REQUIRED: Minimum of 6 months of driving experience required
• REQUIRED: A safe driving record on the road
• REQUIRED: No more than 6 jobs in the last 3 years
• Canadian admissibility endorsement a plus
• Doubles/triples endorsement a plus

• REQUIRED: A Background check required
• REQUIRED: A clean drug test required
• REQUIRED: A clean clearinghouse result is required

James J. Williams is an Equal Opportunity Employer. We are committed to fair pay and equal opportunity for all employees.

Earn a $100 new driver partner promotion and up to $26.00/hr (net) driving on the Via platform in Darrington, WA!

Via uses app-based technology to make transportation more efficient. We are reinventing shared rides to help reduce congestion, lower emissions, and get passengers to their destinations efficiently.

Why partner with Via?

? $100 new driver partner promotion*

? Eligible to earn up to $26/hour after any vehicle-related expenses.

? Choose when you log on to drive! Driver Partners are independent contractors who are self-employed and have the flexibility to choose when they provide service, with no minimum commitments

? Provide shared rides using an efficient routing system

? 24/7 Live Support from real people

? Lease a vehicle from our vehicle partner, and avoid wear and tear on your personal vehicle

To be eligible to operate on the Via Platform in Darrington, you must:

? Have a valid US drivers license

? Are 25 years of age or older

? Have more than 1 year of driving history

? Have a personal auto insurance policy

? Lease and drive a vehicle from a vehicle leasing partner

? Available to attend WAV onboarding and physically able to push a wheelchair and operate WAV vehicle

? Pass a background check, including criminal and motor vehicle record checks (SSN needed)

? Complete a DOT pre-engagement drug test and submit to ongoing DOT drug and alcohol testing as required under FTA rules

Any additional requirements for participating in this service will be communicated to prospective Driver Partners as necessary.

*New driver partner promotion: To be eligible, you must complete at least 10 hours of driving on the Via platform within 30 days of completing your driver onboarding session. Time offline, including breaks, will not be included in this 30-hour minimum. This promotion may be revoked or altered at any time at Via's sole discretion, and these terms are subject to change at Via's sole discretion.

Job Title: Support Engineer

Location: Seattle, WA / Bothell, WA (On-site)

Job Type: Full-time

About Us:

Cinnamon is a forward-thinking healthcare technology company focused on empowering patient advocates through innovative solutions. By automating critical processes, we help healthcare organizations secure financial assistance for their patients efficiently and securely. Our mission is to improve healthcare accessibility while maintaining the highest standards of data integrity, compliance, and customer trust.

Role Summary:

We are seeking a skilled Support Engineer to lead technical support efforts for healthcare customers and internal Cinnamon users. This role partners closely with engineering, product, implementation, clinical operations, and security teams to resolve complex issues, improve system reliability, and deliver a high-quality user experience across the platform. You will handle escalations, guide support processes, and contribute to a strong operational and security posture. The ideal candidate excels at cross-functional troubleshooting, clear communication, and customer empathy.

Key Responsibilities:

• Own customer support issues end to end and ensure timely, accurate resolutions
• Support customer onboarding by validating configuration, reviewing workflows, and preparing customers for go-live
• Deliver advanced training and create materials that help clinical and administrative teams adopt the platform effectively
• Serve as the escalation point for Jira Service queues and guide triage and prioritization
• Provide advanced support to internal users across authentication, access, feature flagging, analytics, logging, VPN, GitHub, password management, and productivity tools
• Investigate and resolve issues across GCP services, , Auth0 flows, LaunchDarkly configuration, Mixpanel events, NordLayer access, GitHub permissions, 1Password access, and related systems
• Maintain and improve documentation in Confluence, including workflow diagrams, runbooks, SOPs, and troubleshooting guides created in Lucidchart
• Perform proactive system monitoring using GCP logs, , uptime indicators, and automated alerts to detect and address issues early
• Reproduce issues, validate fixes, analyze root causes, and collaborate with engineering to improve reliability and data integrity
• Ensure support follows HIPAA-aligned privacy, security, and data handling requirements
• Surface findings from Intruder and SecurityScorecard and track remediation with security and engineering teams
• Identify recurring patterns in support tickets, propose workflow and product improvements, and contribute insights to roadmap discussions
• Mentor junior support engineers and help develop team best practices
• Participate in incident response efforts for issues affecting multiple customers or systems

Required Qualifications:

• 4-6 years of experience providing technical support in a SaaS, healthcare, or cloud-based environment
• Proven experience supporting healthcare customers or healthcare data workflows
• Experience owning escalations and complex troubleshooting efforts in coordination with engineering or product teams
• Proficiency with Jira Service Management for issue triage and workflows analysis
• Experience supporting enterprise SaaS platforms for authentication, identity management, analytics, logging, VPN access, and secure productivity operations
• Hands-on experience with Google Cloud Platform logs, error reports, service metrics, or interactions with Cloud Run and Cloud Functions
• Strong understanding of QA processes, root cause analysis, and cross-environment troubleshooting
• Excellent communication skills with the ability to explain technical issues to non-technical healthcare users
• Strong documentation skills maintaining shared knowledge bases or support playbooks
• Comfort handling workloads involving sensitive healthcare information and security-related tasks

Preferred Qualifications:

• Scripting or automation experience in Python, Bash, or PowerShell
• Familiarity with HL7, X12, FHIR, or common healthcare data exchange patterns
• Experience supporting customers during EHR integrations or workflow onboarding
• Experience with remote support tools such as TeamViewer or AnyDesk
• Experience building documentation or diagrams in Confluence and Lucidchart
• Exposure to security monitoring tools or vulnerability management processes
• Prior mentorship or leadership experience in a support environment

What We Offer:

• A competitive salary and stock options grant
• Holiday schedule according to your country of residence and PTO
• An innovative and high-paced work environment with a flat management hierarchy
• Opportunities for professional growth and advancement in a rapidly scaling company

How to Apply:

Send your resume and a cover letter detailing your relevant experience and interest in the position to We look forward to reviewing your application and exploring how you can help us advance healthcare through innovation and technology!

Join us in transforming healthcare through innovative technology!

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for a Sealer Aircraft Integral Fuel Tank Components to join our Joint and Installation team in Everett and Renton , Washington .

As a Sealer for Aircraft Integral Fuel Tank Components, you will play a vital role in ensuring the highest standards of quality and safety in the sealing and assembly processes. Your responsibilities will include working from blueprints and specifications to clean surfaces, apply sealants, and prepare fuel vents for leak tests. You will also perform necessary rework and apply corrosion preventative seals to maintain the integrity of fuel tank components. Attention to detail is essential as you assist with pressure testing operations and coordinate effectively with supervisors and team members to ensure seamless communication across shifts.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Work from blueprints, documents, standards, and other required specifications to complete assigned tasks.
• Obtain daily work assignments from the team leader or supervisor and read Installation Plans and applicable drawings to determine work areas.
• Select appropriate cleaning solvents and clean interior and exterior surfaces prior to sealing.
• Load sealing guns and clean sealing equipment, ensuring proper functionality.
• Hand mix sealant as required and perform rework or pickups on assigned assemblies.
• Assist with pressure testing operations as assigned.
• Use specified agents and procedures for tasks such as removing protective coatings, applying corrosion inhibitors, and reactivating paint surfaces.
• Ensure proper grounding of the aircraft prior to cleaning operations and set up ventilation equipment to supply fresh air in work areas.
• Keep supervisors informed of progress and coordinate information with employees on other shifts.
• Mask areas as required to facilitate corrosion removal or painting operations.
• Prepare fuel vents for leak tests and restore them to normal after testing.
• Apply corrosion preventative seal as required and measure, layout, and apply aerodynamic seals to skin gaps on leading and trailing edge panels.
• Submit completed jobs or in-process checks to inspectors for acceptance or rejection.
• Apply decals, metalcals, placards, and charts to specific locations on parts and assemblies as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 1+ years of experience with paints, coatings, finishes, and/or sealants.

• Experience in handling chemicals and/or hazardous materials.

• Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

• Experience working from heights & using fall protection equipment with weight limitations.

• Experience with safety process and/or procedures in a manufacturing or operations environment.

• Experience working with tools and following work instructions.

Preferred Qualifications:

• 1+ year of experience performing aerospace sealing.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

• Completed 1+ year of aerospace sealing in high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.00/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Aug. 28, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for a Sealer Aircraft Integral Fuel Tank Components to join our Joint and Installation team in Everett and Renton , Washington .

As a Sealer for Aircraft Integral Fuel Tank Components, you will play a vital role in ensuring the highest standards of quality and safety in the sealing and assembly processes. Your responsibilities will include working from blueprints and specifications to clean surfaces, apply sealants, and prepare fuel vents for leak tests. You will also perform necessary rework and apply corrosion preventative seals to maintain the integrity of fuel tank components. Attention to detail is essential as you assist with pressure testing operations and coordinate effectively with supervisors and team members to ensure seamless communication across shifts.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Work from blueprints, documents, standards, and other required specifications to complete assigned tasks.
• Obtain daily work assignments from the team leader or supervisor and read Installation Plans and applicable drawings to determine work areas.
• Select appropriate cleaning solvents and clean interior and exterior surfaces prior to sealing.
• Load sealing guns and clean sealing equipment, ensuring proper functionality.
• Hand mix sealant as required and perform rework or pickups on assigned assemblies.
• Assist with pressure testing operations as assigned.
• Use specified agents and procedures for tasks such as removing protective coatings, applying corrosion inhibitors, and reactivating paint surfaces.
• Ensure proper grounding of the aircraft prior to cleaning operations and set up ventilation equipment to supply fresh air in work areas.
• Keep supervisors informed of progress and coordinate information with employees on other shifts.
• Mask areas as required to facilitate corrosion removal or painting operations.
• Prepare fuel vents for leak tests and restore them to normal after testing.
• Apply corrosion preventative seal as required and measure, layout, and apply aerodynamic seals to skin gaps on leading and trailing edge panels.
• Submit completed jobs or in-process checks to inspectors for acceptance or rejection.
• Apply decals, metalcals, placards, and charts to specific locations on parts and assemblies as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 1+ years of experience with paints, coatings, finishes, and/or sealants.

• Experience in handling chemicals and/or hazardous materials.

• Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

• Experience working from heights & using fall protection equipment with weight limitations.

• Experience with safety process and/or procedures in a manufacturing or operations environment.

• Experience working with tools and following work instructions.

Preferred Qualifications:

• 1+ year of experience performing aerospace sealing.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

• Completed 1+ year of aerospace sealing in high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.00/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Aug. 28, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.Boeing Commercial Airlines is excited to offer opportunities for a Sealer Aircraft Integral Fuel Tank Components to join our Joint and Installation team in Everett and Renton , Washington .As a Sealer for Aircraft Integral Fuel Tank Components, you will play a vital role in ensuring the highest standards of quality and safety in the sealing and assembly processes.

Your responsibilities will include working from blueprints and specifications to clean surfaces, apply sealants, and prepare fuel vents for leak tests.

You will also perform necessary rework and apply corrosion preventative seals to maintain the integrity of fuel tank components.

Attention to detail is essential as you assist with pressure testing operations and coordinate effectively with supervisors and team members to ensure seamless communication across shifts.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.

If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Work from blueprints, documents, standards, and other required specifications to complete assigned tasks.Obtain daily work assignments from the team leader or supervisor and read Installation Plans and applicable drawings to determine work areas.Select appropriate cleaning solvents and clean interior and exterior surfaces prior to sealing.Load sealing guns and clean sealing equipment, ensuring proper functionality.Hand mix sealant as required and perform rework or pickups on assigned assemblies.Assist with pressure testing operations as assigned.Use specified agents and procedures for tasks such as removing protective coatings, applying corrosion inhibitors, and reactivating paint surfaces.Ensure proper grounding of the aircraft prior to cleaning operations and set up ventilation equipment to supply fresh air in work areas.Keep supervisors informed of progress and coordinate information with employees on other shifts.Mask areas as required to facilitate corrosion removal or painting operations.Prepare fuel vents for leak tests and restore them to normal after testing.Apply corrosion preventative seal as required and measure, layout, and apply aerodynamic seals to skin gaps on leading and trailing edge panels.Submit completed jobs or in-process checks to inspectors for acceptance or rejection.Apply decals, metalcals, placards, and charts to specific locations on parts and assemblies as required.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.

The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.

F.

R.

§ 120.15 is required.

"US Person" includes US Citizen, lawful permanent resident, refugee, or asyleeCurrent Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.

Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications :1+ years of experience with paints, coatings, finishes, and/or sealants.Experience in handling chemicals and/or hazardous materials.Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.Experience working from heights & using fall protection equipment with weight limitations.Experience with safety process and/or procedures in a manufacturing or operations environment.

Experience working with tools and following work instructions.Preferred Qualifications:1+ year of experience performing aerospace sealing.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Completed 1+ year of aerospace sealing in high school or community and technology college academic program.Typical Education & Experience:High school graduate or GED preferred.Relocation: Relocation assistance is not a negotiable benefit for this position.

Candidates must live in the immediate area or relocate at their own expense.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement : This position is for a variety of shiftsTotal Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $25.00/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Aug.

28, 2026Language RequirementsEnglish PreferredRelocationRelocation assistance is not a negotiable benefit for this position.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

At Capgemini Engineering, the world leader in engineering services, we bring together a global team of engineers, scientists, and architects to help the world’s most innovative companies unleash their potential. From autonomous cars to life-saving robots, our digital and software technology experts think outside the box as they provide unique R&D and engineering services across all industries. Join us for a career full of opportunities. Where you can make a difference. Where no two days are the same.

About the Role You're Considering

As a Senior Employee Development / Training Specialist as part of our Industrial Operations - Training team, you will play a pivotal role in shaping the technical capabilities of aerospace manufacturing workforce.

In this role you will play a key role in:

• Leading projects designed to produce high-quality educational deliverables that enhance technical proficiency across aerospace manufacturing disciplines
• Conducting comprehensive learning requirements analysis and establishing clear, measurable learning objectives aligned with business needs
• Delivering specialized content in one or more areas of Aerospace Skills expertise (Electrical, Structural, Seal, Quality, Systems, etc.) and assessing effectiveness based on established learning objectives
• Facilitating dynamic learning events through various delivery methods, customizing programs to maximize knowledge retention and practical application
• Performing as a Subject Matter Expert (SME) to provide training consultation services and strategic guidance to stakeholders
• Coaching and developing less experienced instructors, conducting Train-the-Trainer sessions to qualify additional instructors
• Monitoring stakeholders' operating environment and key business measures to continuously improve training effectiveness
• Emphasizing safety precautions in all training provided while maintaining a positive and productive learning environment
• Collaborating with cross-functional teams to develop creative training enhancements, guided skills practices, job aids, and activities that support learner success
• Identifying and validating training effectiveness through observation, measurement, testing, and analysis to ensure learning objectives are met

Must Have Qualifications

• 5+ years of experience in aerospace manufacturing operations and/or manufacturing support, with demonstrated expertise in specialized technical areas
• US Citizen
• Ability to work onsite in Everett, WA
• Proven experience as a coach, instructor, or employee development specialist with the ability to lead and mentor others
• Experience in designing and employing leadership development courseware and/or curriculum
• Specialized knowledge in one or more aerospace disciplines such as Structural, Electrical, Repair, Functional Test, Seal, or Systems
• Experience working with detailed work instructions and interpreting complex blueprints and drawings
• Strong background in needs assessment, job analysis, and performance improvement methodologies
• Excellent communication and interpersonal skills with the ability to engage diverse audiences
• Demonstrated project management capabilities with a track record of delivering educational initiatives on time and within scope
• Ability to adapt teaching methods to accommodate different learning styles and technical backgrounds

The base compensation range for this role in the posted location is: $76,200.00 - $187,740.00

Capgemini provides compensation range information in accordance with applicable national, state, provincial, and local pay transparency laws. The base compensation range listed for this position reflects the minimum and maximum target compensation Capgemini, in good faith, believes it may pay for the role at the time of this posting. This range may be subject to change as permitted by law.

The actual compensation offered to any candidate may fall outside of the posted range and will be determined based on multiple factors legally permitted in the applicable jurisdiction.

These may include, but are not limited to: Geographic location, Education and qualifications, Certifications and licenses, Relevant experience and skills, Seniority and performance, Market and business consideration, Internal pay equity.

It is not typical for candidates to be hired at or near the top of the posted compensation range.

In addition to base salary, this role may be eligible for additional compensation such as variable incentives, bonuses, or commissions, depending on the position and applicable laws.

Capgemini offers a comprehensive, non-negotiable benefits package to all regular, full-time employees. In the U.S. and Canada, available benefits are determined by local policy and eligibility and may include:

• Paid time off based on employee grade (A-F), defined by policy: Vacation: 12-25 days, depending on grade, Company paid holidays, Personal Days, Sick Leave
• Medical, dental, and vision coverage (or provincial healthcare coordination in Canada)
• Retirement savings plans (e.g., 401(k) in the U.S., RRSP in Canada)
• Life and disability insurance
• Employee assistance programs
• Other benefits as provided by local policy and eligibility

Important Notice: Compensation (including bonuses, commissions, or other forms of incentive pay) is not considered earned, vested, or payable until it becomes due under the terms of applicable plans or agreements and is subject to Capgemini’s discretion, consistent with applicable laws. The Company reserves the right to amend or withdraw compensation programs at any time, within the limits of applicable legislation.

Disclaimers

Capgemini is an Equal Opportunity Employer encouraging inclusion in the workplace. Capgemini also participates in the Partnership Accreditation in Indigenous Relations (PAIR) program which supports meaningful engagement with Indigenous communities across Canada by promoting fairness, accessibility, inclusion and respect. We value the rich cultural heritage and contributions of Indigenous Peoples and actively work to create a welcoming and respectful environment. All qualified applicants will receive consideration for employment without regard to race, national origin, gender identity/expression, age, religion, disability, sexual orientation, genetics, veteran status, marital status or any other characteristic protected by law.

This is a general description of the Duties, Responsibilities and Qualifications required for this position. Physical, mental, sensory or environmental demands may be referenced in an attempt to communicate the manner in which this position traditionally is performed. Whenever necessary to provide individuals with disabilities an equal employment opportunity, Capgemini will consider reasonable accommodations that might involve varying job requirements and/or changing the way this job is performed, provided that such accommodation does not pose an undue hardship. Capgemini is committed to providing reasonable accommodation during our recruitment process. If you need assistance or accommodation, please reach out to your recruiting contact.

Please be aware that Capgemini may capture your image (video or screenshot) during the interview process and that image may be used for verification, including during the hiring and onboarding process.

Click the following link for more information on your rights as an Applicant in the United States. is a global business and technology transformation partner, helping organizations to accelerate their dual transition to a digital and sustainable world, while creating tangible impact for enterprises and society. It is a responsible and diverse group of 340,000 team members in more than 50 countries. With its strong over 55-year heritage, Capgemini is trusted by its clients to unlock the value of technology to address the entire breadth of their business needs. It delivers end-to-end services and solutions leveraging strengths from strategy and design to engineering, all fueled by its market leading capabilities in AI, generative AI, cloud and data, combined with its deep industry expertise and partner ecosystem.