Information Technology Jobs in Beaumont, TX

Position summary:

Install, maintain, and repair electrical systems, apparatus, and electrical equipment, wiring and fixtures, and electronic components of industrial machinery and equipment following electrical code, manuals, schematic diagrams, blueprints, and other specifications, using hand tools, power tools, and electrical and electronic test equipment.

Tasks:

• Install power supply wiring and conduit for newly installed machines and equipment following electrical code and blueprints, using hand tools and voltage tester.
• Install ground leads and connect power cables and wires to machines and equipment, following manuals, schematic diagrams, blueprints, using hand tools and test equipment.
• Diagnoses malfunctioning apparatus, such as transformers, motors, and fixtures using test equipment.
• Repair or replace faulty electric components, wiring, equipment, and fixtures, using hand tools and power tools.
• Test malfunctioning or broken equipment using test equipment, and discuss malfunction with other workers to diagnose malfunction.
• Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
• Place conduit, pipes or tubing, inside designated partitions, walls, structures or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
• Connect wires to circuit breakers, transformers, or other components.
• Install ground leads and connect power cables to equipment, such as motors.

Skills:

• Installation - Installing equipment, machines, wiring, or programs to meet specifications.
• Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
• Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
• Troubleshooting - Determining causes of operating errors and deciding what to do about it.
• Equipment Selection - Determining the kind of tools and equipment needed to do a job.
• Repairing - Repairing machines or systems using the needed tools.

Attributes:

• Follow the rules of safe conduct at all times.
• Demonstrate ability to effectively utilize materials/resources in cost-effective manner.
• Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
• Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
• Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences.
• Information Ordering - The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
• Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
• Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.

Knowledge Requirements:

• Post-Secondary Certificate desirable- awarded for training completed after high school. Minimum 5 years in craft, including helper and apprentice roles. Minimum 2 years as journeyman working in industrial environment
• READING: The employee must have the ability to read safety requirements, instructions in the correct use and maintenance of shop tools, be able to read and understand methods and procedures that are present on drawings, layout work, and just specifications.
• WRITING: Must have the ability to write simple reports with the correct format using spelling and grammar. (English
• SPEAKING: Must have the ability to speak using correct English with a well modulated voice.
• The minimum math ability usually associated with this classification is the ability to calculate surface areas, translate these figures into a bill of material which can be used to complete a specific job. Employees must be able to use variable and formulas which are normally found in most industry approved trade hand books. Also, employees must be familiar with the O.S.H.A. requirements for the type work that is being performed.

The employee must understand that the reporting system used for problems and information is as follows: 1) Crewleader, 2) Foreman, 3) General Foreman, and 4) Superintendent.

Physical Requirements:

• Positions require working in: climbing, bending, sitting, walking, kneeling, crawling, standing, lifting, pushing, and pulling.
• Good hand eye balance and the ability to distinguish colors are required in order to use the tools that are necessary to perform the required work.
• Employees must have vision which has good depth perception in order to judge distance and space relationships.
• The employee must be able to work in all types of weather conditions.
• The ability to work in elevated positions is a must.
• The employee must be able to work in confined spaces as well as wear the following safety equipment when need be: life vests, ear protection, rubber gloves, leather gloves, hard hat, slicker suit, acid suit, rubber gloves, full face breathing mask, wearing full safety harness, or wearing a face shield.
• The heavy work will require the employee to exert up to 100 pounds of force occasionally: The medium work will require the exerting of 50 pounds of frequently: The remainder of the work should require the exertion of 20 pounds of force to constantly move an object.

Other Requirements:

The employee must have a telephone. The employee is expected to work overtime in order to maintain the plant in a safe and productive state. The employee is expected to make call outs when such work is available and the employee’s services are needed.

The employee must have a valid Texas Driver’s License and have permission prior to operating any TIG vehicle. The requirements for operating a company vehicle are as follows: In the past three (3) years the employee can have had only 4 moving violations, no more than 2 chargeable accidents, and no D.W.I.

NOTICE: THIS JOB DESCRIPTION IN NO WAY STATES OR IMPLIES THAT THESE ARE THE ONLY DUTIES TO BE PREFORMED BY THIS EMPLOYEE. HE OR SHE WILL BE REQUIRED TO FOLLOW ANY OTHER INSTRUCTIONS AND TO PERFORM ANY OTHER DUTIES REQUESTED BY HIS OR HER SUPERVISOR.

Job Type: Full-time

Summary:

The Clinical Educator II plays a vital role in advancing clinical excellence through the design, delivery, and evaluation of clinical education and competency development. This role leads and supports onboarding, orientation, and ongoing professional development for clinical staff across diverse specialties. The educator applies adult learning principles, evidence-based practices, and innovative modalities - including simulation, eLearning, and microlearning - to foster a culture of continuous learning and clinical proficiency. The Clinical Educator II collaborates with clinical teams to ensure education initiatives meet regulatory standards, support safe patient care, and align with organizational goals. Serves as a subject matter expert and mentor to Clinical Educator I and other staff. Participates in and supports the strategic planning and quality improvement efforts of the education team.

Responsibilities:

• Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
• Conducts learning needs assessments to identify gaps in clinical knowledge, skills, and practice.
• Designs, develops, and leads education programs using contemporary teaching strategies and technologies.
• Facilitates onboarding and orientation for new clinical staff, ensuring smooth integration into practice environments.
• Coordinates and validate clinical competencies for new hires and existing staff, including annual skills assessments and regulatory requirements.
• Integrates simulation-based learning, case-based scenarios, and hands-on training to enhance clinical decision-making and critical thinking.
• Serves as a resource and mentor for preceptors, supporting their development and effectiveness in staff training.
• Promotes evidence-based practice and support staff in translating research into clinical application.
• Collaborates with interdisciplinary teams to support interprofessional education and shared learning experiences.
• Maintains documentation of educational activities, competency validations, and outcomes for compliance and quality improvement.
• Participates in committees and initiatives focused on clinical education, safety, and performance improvement.
• Evaluates program effectiveness and implements improvements.
• Serves as a resource for evidence-based practice and clinical standards.
• Responsible for other related duties as assigned.

Job Requirements:

Education/Skills

• Bachelor's of Science in Nursing (BSN) required; current enrollment considered with an expectation of completion within a defined timeframe
• Knowledge of adult learning principles, instructional design, and technology-enhanced learning tools (simulation, LMS, eLearning platforms)

Experience

• 2 years of OR circulating clinical experience preferred
• Experience in education, preceptorship, or staff development preferred

Licenses, Registrations, or Certifications

• RN licensure in the state of employment or compact required
• ANCC Nursing Professional Development Certification (NPD-BC) preferred
• BLS required within 30 days of hire

In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame.

Work Schedule:

5 Days - 8 Hours

Work Type:

Full Time

Summary:

The Nuclear Medicine Technologist will perform a wide variety of routine and advanced imaging procedures, will provide support for other imaging technologists as needed, and help to facilitate smooth and efficient patient flow. The technologist will demonstrate flexibility by working other shifts and/or at other campuses as needed or required. The technologist must be able to troubleshoot basic maintenance, participate in QA, and resolve issues related to image processing and the image archiving system. Expectation to participate in ongoing education, safety, and technical advances within their scope of licensure. The technologists will adhere to, and maintain, the expected imaging competencies as outlined by management. Observe radiation, personnel, and patient safety measures. Maintains radiation safety protocol while handling radionuclides and pharmaceuticals used in the department. Completes daily logs and periodic tests performed as required by the license. Behavior and communication skills must align with the organization's mission, values, and culture.

Responsibilities:

• Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
• Demonstrates adherence to the Core Values of CHRISTUS Health.
• Maintains consistency with Administrative and Departmental policies with appropriate behavior, dress, attitude, attendance, confidentiality, professionalism, and reliability.
• Promotes staff growth, development, and employee engagement by collaborating with management, coworkers, and physicians to create an optimal work environment.
• Promotes exceptional physician satisfaction by providing meaningful assistance to radiologists and referring physicians.
• Performs all duties in a manner that protects the confidentiality of patients and does not solicit or disclose any confidential information unless it is necessary in the performance of assigned job duties.
• Appropriately adapt assigned patient assessment, treatment, and/or care methods to accommodate the unique physical, psychosocial, cultural, spiritual, age-specific, and other developmental needs of each patient served.
• Ensures compliance with all policies, procedures, and standards of care as deemed appropriate by State and Federal agencies, the hospital, and other regulatory entities.
• Performs examinations/procedures as needed to assist in patient throughput within the scope of the Manager’s license(s), certification(s), and/or documented competencies.
• Demonstrates flexibility by working other shifts and at other campuses as needed or required.
• Ensures completed exams are scanned and stored correctly in PACS.
• Ability to follow PACS downtime procedures as a PACS Superuser and escalate any problem(s) or issue(s) to the PACS administrator or Designee if needed.
• Troubleshoots and reports any equipment malfunctions to the Director/Manager and/or Biomedical personnel; does appropriate follow-up.
• Performs other duties as assigned.

Job Requirements:

Education/Skills

• Graduate of an accredited school of Radiology Technology or other accepted and approved equivalent required

Experience

• 1 year of experience in a clinical nuclear medicine setting preferred
• Basic computer experience required

Licenses, Registrations, or Certifications

• Nuclear Medicine Technology (N) by ARRT or NMTCB required
• State Licensure required
  • Texas: MRT by TMB
  • Louisiana: LRT (N) or (F) by LSRTBE
  • New Mexico: NMT by MIRTP NMED
• BLS required

Work Schedule:

5 Days - 8 Hours

Work Type:

Full Time

Summary:

The Computed Tomography (CT) Technologist will perform a wide variety of routine and advanced imaging procedures, will provide support for other imaging technologists as needed, and will help to facilitate smooth and efficient patient flow. The CT Technologist will demonstrate flexibility by working other shifts and/or at other campuses as needed or required. The CT Technologist must be able to troubleshoot basic maintenance, participate in QA, and resolve issues related to image processing and the image archiving system. Expectation to participate in ongoing education, safety, and technical advances within their scope of licensure. The CT Technologist will adhere to and maintain expected imaging competencies as management outlines. Behavior and communication skills must align with the organization's mission, values, and culture.

Responsibilities:

• Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
• Demonstrates adherence to the Core Values of CHRISTUS Health.
• Maintains consistency with Administrative and Departmental policies with appropriate behavior, dress, attitude, attendance, confidentiality, professionalism, and reliability.
• Promotes staff growth, development, and employee engagement by collaborating with management, coworkers, and physicians to create an optimal work environment.
• Promotes exceptional physician satisfaction by providing meaningful assistance to radiologists and referring physicians.
• Performs all duties in a manner that protects the confidentiality of patients and does not solicit or disclose any confidential information unless it is necessary in the performance of assigned job duties.
• Appropriately adapt assigned patient assessment, treatment, and/or care methods to accommodate the unique physical, psychosocial, cultural, spiritual, age-specific, and other developmental needs of each patient served.
• Ensures compliance with all policies, procedures, and standards of care as deemed appropriate by State and Federal agencies, the hospital, and other regulatory entities.
• Performs examinations/procedures as needed to assist in patient throughput within the scope of the Manager’s license(s), certification(s), and/or documented competencies.
• Demonstrates flexibility by working other shifts and at other campuses as needed or required.
• Ensures completed exams are scanned and stored correctly in PACS.
• Ability to follow PACS downtime procedures as a PACS Superuser and escalate any problem(s) or issue(s) to the PACS administrator or Designee if needed.
• Troubleshoots and reports any equipment malfunctions to the Director/Manager and/or Biomedical personnel; does appropriate follow-up.
• Performs other duties as assigned.

Job Requirements:

Education/Skills

• Graduate of an accredited school of Radiology Technology or other accepted and approved equivalent required

Experience

• 1 year of CT experience in a Hospital or Clinical setting preferred
• Basic computer experience required

Licenses, Registrations, or Certifications

• One of the following primary modality certifications is required
  • Radiography (R) by ARRT
  • Nuclear Medicine Technology by ARRT or NMTCB
• Computed Tomography (CT) by ARRT or NMTCB is required within 1 year of hire (CT required upon hire in the state of New Mexico)
• State Licensure required
  • Texas: MRT by TMB
  • Louisiana: LRT (R), (N), or (F) by LSRTBE
  • New Mexico: CT or FUS by MIRTP NMED
• BLS required

Work Schedule:

MULTIPLE SHIFTS AVAILABLE

Work Type:

Per Diem As Needed

Summary:

The Computed Tomography (CT) Technologist will perform a wide variety of routine and advanced imaging procedures, will provide support for other imaging technologists as needed, and help to facilitate smooth and efficient patient flow. The CT Technologist will demonstrate flexibility by working other shifts and/or at other campuses as needed or required. The CT Technologist must be able to troubleshoot basic maintenance, participate in QA, and resolve issues related to image processing and the image archiving system. The Technologist is expected to participate in ongoing education, safety, and technical advances within their scope of licensure. The Technologist will adhere to, and maintain, the expected imaging competencies as outlined by management. Behavior and communication skills must align with the organization's mission, values, and culture.

Responsibilities:

• Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
• Demonstrates adherence to the Core Values of CHRISTUS Health.
• Maintains consistency with Administrative and Departmental policies with appropriate behavior, dress, attitude, attendance, confidentiality, professionalism, and reliability.
• Promotes staff growth, development, and employee engagement by collaborating with management, coworkers, and physicians to create an optimal work environment.
• Promotes exceptional physician satisfaction by providing meaningful assistance to radiologists and referring physicians.
• Performs all duties in a manner that protects the confidentiality of patients and does not solicit or disclose any confidential information unless it is necessary in the performance of assigned job duties.
• Appropriately adapt assigned patient assessment, treatment, and/or care methods to accommodate the unique physical, psychosocial, cultural, spiritual, age-specific, and other developmental needs of each patient served.
• Ensures compliance with all policies, procedures, and standards of care as deemed appropriate by State and Federal agencies, the hospital, and other regulatory entities.
• Performs examinations/procedures as needed to assist in patient throughput within the scope of the Manager’s license(s), certification(s), and/or documented competencies.
• Demonstrates flexibility by working other shifts and at other campuses as needed or required.
• Ensures completed exams are scanned and stored correctly in PACS.
• Ability to follow PACS downtime procedures as a PACS Superuser and escalate any problem(s) or issue(s) to the PACS administrator or Designee if needed.
• Troubleshoots and reports any equipment malfunctions to the Director/Manager and/or Biomedical personnel; does appropriate follow-up.
• Performs other duties as assigned.

Job Requirements:

Education/Skills

• Graduate of an accredited school of Radiology Technology or other accepted and approved equivalent required

Experience

• 1 year of CT experience in a hospital or clinical setting preferred
• Basic computer experience required

Licenses, Registrations, or Certifications

• One of the following primary modality certifications is required:
  • Radiography (R) by ARRT
  • Nuclear Medicine Technology by ARRT or NMTCB
• Computed Tomography (CT) by ARRT or NMTCB preferred
• State Licensure required
  • Texas: MRT by TMB
  • Louisiana: LRT (R), (N), or (F) by LSRTBE
• BLS required

Work Schedule:

PRN

Work Type:

Per Diem As Needed

Summary:

The Radiology Technologist will perform a wide variety of routine and advanced imaging procedures, will provide support for other imaging technologists as needed, and help to facilitate smooth and efficient patient flow. The technologist will demonstrate flexibility by working other shifts and/or at other campuses as needed or required. The technologist must be able to troubleshoot basic maintenance, participate in QA, and resolve issues related to image processing and the image archiving system. Expectation to participate in ongoing education, safety, and technical advances within their scope of licensure. The Technologist will adhere to, and maintain, the expected imaging competencies as outlined by management. Behavior and communication skills must align with the organization's mission, values, and culture.

Responsibilities:

• Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
• Demonstrates adherence to the Core Values of CHRISTUS Health.
• Maintains consistency with Administrative and Departmental policies with appropriate behavior, dress, attitude, attendance, confidentiality, professionalism, and reliability.
• Promotes staff growth, development, and employee engagement by collaborating with management, coworkers, and physicians to create an optimal work environment.
• Promotes exceptional physician satisfaction by providing meaningful assistance to radiologists and referring physicians.
• Performs all duties in a manner that protects the confidentiality of patients and does not solicit or disclose any confidential information unless it is necessary in the performance of assigned job duties.
• Appropriately adapt assigned patient assessment, treatment, and/or care methods to accommodate the unique physical, psychosocial, cultural, spiritual, age-specific, and other developmental needs of each patient served.
• Ensures compliance with all policies, procedures, and standards of care as deemed appropriate by State and Federal agencies, the hospital, and other regulatory entities.
• Performs examinations/procedures as needed to assist in patient throughput within the scope of the Manager’s license(s), certification(s), and/or documented competencies.
• Demonstrates flexibility by working other shifts and at other campuses as needed or required.
• Ensures completed exams are scanned and stored correctly in PACS.
• Ability to follow PACS downtime procedures as a PACS Superuser and escalate any problem(s) or issue(s) to the PACS administrator or Designee if needed.
• Troubleshoots and reports any equipment malfunctions to the Director/Manager and/or Biomedical personnel; does appropriate follow-up.
• Performs other duties as assigned.

Job Requirements:

Education/Skills

• Graduate of an accredited school of Radiology Technology or other accepted and approved equivalent required

Experience

• 1 year of experience in a hospital preferred
• Basic computer experience required

Licenses, Registrations, or Certifications

• Radiography (R) by ARRT is required
• State Licensure required
  • Texas: MRT by TMB
  • Louisiana: LRT (R) or (F) by LSRTBE
  • New Mexico: RRT by MIRTP NMED
• BLS required

Work Schedule:

PRN

Work Type:

Per Diem As Needed