Information Technology Jobs in Avon, CT

Six Flags Entertainment Corporation is the world's largest regional theme park company with over 42 parks across North America. For more than 55 years, Six Flags has entertained millions of families with world-class coasters, themed rides, thrilling water parks, and unique attractions. With a culture built on safety, service, fun and friendliness, integrity, innovation, and results orientation, our mission at Six Flags New England is to create fun and thrills for all ages.

Pay Starting at $18.50/Hour

• Supporting and up-holding the mission, goals and objectives of the Six Flags New England Safety Department
• Providing quality basic life support care to include all Basic Life Support (BLS) skills on patients in the pre-hospital setting as indicated by state law, statewide protocol, regional policy and procedure and the Standard Operating
• Guidelines set forth by the Six Flags New England First Aid Policies and Procedures manual
• Interacting with other EMS, Fire, and Police services as required to promote patient care and transportation
• Complying with Departmental requirements regarding documentation, data input, and information handling
• Perform minor vehicle maintenance (fuel, fluids, air, wash vehicles etc.) on all vehicles as required
• Responding and assisting as needed or directed in the Six Flags New England Emergency Response Guide
• Enforcing all Six Flags New England policies
• Assisting in other areas of the Safety Department
• Performing other incidental and related duties as required and assigned

• Current Massachusetts EMT Certification
• Current Basic Life Support Healthcare Provider CPR card
• Current MA licensed driver without serious moving violations
• Strong work ethic, attention to detail, and organizational skills
• Ability to interact in a professional and positive manner with large groups of people
• Friendly, outgoing personality, and the ability to address guest concerns
• Willing to work in a high-performance team environment
• Willing to work a flexible schedule, including evenings, weekends, and holidays
• Able to meet the physical demands of the job, with or without reasonable accommodations, including walking long distances, standing for long periods of time, lifting, working at heights, etc.
• Able to communicate effectively in the English language, including the ability to read, speak, and understand the English language
• 18 years old or older

Job Title: Distribution and Marketing Data Product Manager

Division: Beazley Shared Services - Data Management

Location: Multiple Locations, US

Hybrid Role

Reports To: Head of Data Products

Key Relationships: Chief Data Office, Data Leadership Team, Data Owners, Distribution and Marketing, CRM, Data Governance and Quality, Data Stewards, Data Architects, Delivery Team members, Technology Team, Finance, Underwriting, Operations and other Business Stakeholders

Beazley:

Beazley is a global specialist insurance company with over 30 years' experience helping people,

communities, and businesses to manage risk all around the world. Our products are wide ranging from cyber & tech to marine, healthcare, financial institutions, and contingency, covering risks like the weather, film production or protection from deadly weapons.

We are a flexible and innovative employer offering a friendly, collaborative, diverse and inclusive work environment. We encourage applications from all backgrounds. Collaboration in office spaces is important and we use a hybrid approach with a minimum of 2 days in the office per week.

We have a wonderful mix of cultures, experiences, and backgrounds at Beazley with over 1500 of us working around the world. Employee's diversity, experience and passion allow us to keep innovating and moving forward, delivering the best. We hire people with wide perspectives, and we have set bold diversity targets as we work towards excellence.

Data @ Beazley:

Our Data team supports Beazley's vision by...

* Being bold through pioneering & championing an exciting vision of how people interact with data

* Facilitating innovation by leading the pace of change in data & analytics, and facilitating the latest capabilities and innovative technologies

* Doing the right thing by providing a controlled working data environment that allows all business domains to thrive independently

* Being the single source of truth for enterprise-wide reporting metrics and KPIs

Our Data team is located at multiple offices across UK, Europe and the US. The specified home office location options provide the best balance for being co-located with key Data Office colleagues and business stakeholders.

The Role:

Data is one of Beazley's greatest assets and this roles is critical to supporting our Distribution and Marketing insights, which includes Customer, Broker and Marketing data. We're seeking a strategic and technically savvy Data Product Manager to lead the strategy, development and evolution of data products and insights that empower our distribution and marketing teams. This role is critical to aligning our data, unlocking insights, and informing growth opportunities across our specialty portfolio. In this role, you will also work to mature data literacy and capabilities as Beazley undertakes a significant investment in modernization, enabling you to embed a culture of data excellence and innovation in our delivery.

Key Responsibilities:

• Partner with the global Distribution and Marketing team to understand, prioritize and develop data products and insights that support their business strategy.

• Build and own a roadmap to provide regular updates on delivery commitments for data products, insights, enhancements and queries.

• Manage stakeholder relationships to support the growth strategy for Beazley customers, brokers, teams and products.

• Produce insights and key data trendsthat highlight business performance, RoI, efficiencies and game-changing growth opportunities.

• Inspire the adoption and use of insights to drive decisions in investment and operations that improve efficiency and drive growth by leading demonstrations and hands on training sessions.

• Lead a team of Product Owners, Product Analysts, Business Analysts and a development team to deliver and maintain data products and insights; maintaining a backlog of work within Jira.

• Represent the business in data governance discussions, escalating issues as appropriate.

• Ensure that data product development considers policy, methodology and standards, and ensure these are adhered to during product development.

• Evaluate the performance of your data product portfolio against KPIs defined by the business and provide feedback on the value delivered.

• Proactively anticipate business needs and look for opportunities to bring innovation or new approaches into the user design, experience, product development and insights.

• Relentlessly focus on the Distribution and Marketing team as a customer, delivering high quality data and insights that are clear and inspire action.

• Partner with the Data Governance Group and CRM solution team (Customer Relationship Management) to drive improvements in our Customer and Broker data quality through MDM and other tools.

• Provide leadership, direction, development and support to direct reports (including off-shore resources).

Essential Criteria:

• Bachelor's degree in Business, Marketing, Data Science, Computer Science, Economics, Statistics or related field; Master's degree preferred

• Proven experience in data product management, marketing analytics or distribution strategy, preferably in insurance or financial services

• Experience working with data, building data models, and sharing insights

Skills and Abilities:

• Strategic and curious with the ability to design and develop data and insights that support our Distribution and Marketing team's goals, planning, performance and incentives that drive growth

• Understand the specialty insurance market, customer segmentation and distribution channels, with experience in North America, Lloyd's, Retail and Wholesale markets preferred

• Ability to lead workshops that help your stakeholders identify data needs and articulate their desired user experience, with the ability to build dashboards preferred

• Strong organization and communication skills with the ability to direct work, document requirements and present demos

• Advanced technical skills with the ability to dive into the data, identify anomalies, and provide high quality, trusted data

• Understanding of Specialty Insurance principles and key drivers to create opportunities, loyalty and growth

Knowledge and Experience:

• Experience in Data Products, Data Analytics, Data Science, Statistics, Economics or related fields in Insurance, Financial or sales organizations preferred

• Strong understanding of MDM and CRM systems and their use with Customer and Broker data

• Proficiency in data visualization (Power BI), analytics platform (Snowflake), dashboard design and data storytelling

• Experience working with insurance data, and in particular a strong understanding of pipeline intelligence for sales growth/ targeting and performance

• Ability to use predictive modeling to drive an understanding of performance, customer behavior, and prospective renewals/ growth to help the Distribution Sales team focus on the best opportunities

• Experience managing relationships and teams of stakeholders, business analysts, data analysts, data architects, data modelers, data engineers and testers using agile processes

• Skills in data engineering technologies like Kafka, Snowflake / Snowpark, DataBricks, Jira and Agile principles

• Experience in managing and manipulating large internal and external datasets

• Knowledge of relational and dimensional database structures, theories, principles, and practices

• Driven and proven team player with ability to work with all levels in a highly intellectual, collaborative, and fast paced environment

• Excellent communication skills, with the ability to tailor them appropriately for different audiences, technical backgrounds, and seniority

Who We Are:

Beazley is a specialist insurance company with over 30 years' experience helping people, communities and businesses to manage risk all around the world. Our mission is to inspire our clients and people with the confidence and freedom to explore, create and build - to enable businesses to thrive. Our clients want to live and work freely and fully, knowing they are benefitting from the most advanced thinking in the insurance market. Our goal is to become the highest performing sustainable specialist insurer.

Our products are wide ranging, from cyber & tech insurance to marine, healthcare, financial institutions and contingency; covering risks such as the weather, film production or protection from deadly weapons.

Our Culture

We have a wonderful mix of cultures, experiences, and backgrounds at Beazley with over 2,000 of us working around the world. Employee's diversity, experience and passion allow us to keep innovating and moving forward, delivering the best. We are proud of our family-feel culture at Beazley that empowers our staff to work from when and where they want, in an adult environment that is big on collaboration, diversity of thought and personal accountability. Our three core values inspire the way we work and how we treat our people and customers.

• Be bold
• Strive for better
• Do the right thing

Upholding these values every day has enabled us to become an innovative and responsive organization in touch with the changing world around us - our ambitious inclusion & diversity and sustainability targets are testament to this.

We are a flexible and innovative employer offering a friendly, collaborative, and inclusive working environment. We actively encourage and expect applications from all backgrounds. Our commitment to fostering a supportive and dynamic workplace ensures that every employee can thrive and contribute to our collective success.

Explore a variety of networks to assist with professional and/or personal development. Our Employee Networks include:

• Beazley RACE - Including, understanding and celebrating People of Colour
• Beazley SHE - Successful, High potential, Empowered women in insurance
• Beazley Proud - Our global LGBTQ+ community
• Beazley Wellbeing - Supporting employees with their mental wellbeing
• Beazley Families - Supporting families and parents-to-be

We encourage internal career progression at Beazley, giving you all the tools you need to drive your own career here, such as:

• Internal Pathways (helping you grow into an underwriting role)
• iLearn (our own learning & development platform)
• LinkedIn Learning
• Mentorship program
• External qualification sponsorship
• Continuing education and tuition reimbursement
• Secondment assignments

The Rewards

• The opportunity to connect and build long-lasting professional relationships while advancing your career with a growing, dynamic organization
• Attractive base compensation and discretionary performance related bonus
• Competitively priced medical, dental and vision insurance
• Company paid life, and short- and long-term disability insurance
• 401(k) plan with 5% company match and immediate vesting
• 22 days PTO (prorated for 1st calendar year of employment), 11 paid holidays per year, with the ability to flex the religious bank holidays to suit your religious beliefs
• Up to $700 reimbursement for home office setup
• Free in-office lunch, travel reimbursement for travel to office, and monthly lifestyle allowance
• Up to 26 weeks of fully paid parental leave
• Up to 2.5 days paid annually for volunteering at a charity of your choice
• Flexible working policy, trusting our employees to do what works best for them and their teams

Salary for this role will be tailored to the successful individual's location and experience. The expected compensation range for this position is $130,000-$150,000 per year plus discretionary annual bonus.

Don't meet all the requirements? At Beazley we're committed to building a diverse, inclusive, and authentic workplace. If you're excited about this role but your experience doesn't perfectly align with every requirement and qualification in the job specification, we encourage you to apply anyway. You might just be the right candidate for this, or one of our other roles.

We are an equal opportunities employer and as such, we will make reasonable adjustments to our selection process for candidates that indicate that, owing to disability, our arrangements might otherwise disadvantage them. If you have a disability, including dyslexia or other non-visible ones, which you believe may affect your performance in selection, please advise us in good time and we'll make reasonable adjustments to our processes for you.

One of the most profitable, stable, and steadily growing healthcare systems in Connecticut is expanding its Ancillary Applications team and looking for a senior-level Application Analyst who enjoys working in a large, complex environment where there’s always something new to learn.

Employee Testimonials:

• They Treat their employees well and with respect.
• Excellent Benefits, technology, pay, culture, reputation!
• Friendly staff and working to solve real problems and help people.
• Many resources and opportunities for development and lots of room for growth!

Job Title: Sr Application Analyst - Ancillary / Clinical Applications

Salary: $115,000 – $135,000

Location: Hartford County, CT Hybrid / Remote (In-office go live)

This is a role where you won’t be boxed into a narrow support function. You’ll be involved in implementations, upgrades, integrations, and modernization efforts across a wide range of clinical and specialty applications that directly support patient care.

The environment is large, well-funded, and constantly evolving, which means real opportunities to learn new technologies, take on larger projects, and pursue additional Epic or related certifications over time.

The position is hybrid, but in practice most of the team works from home and comes onsite primarily for go-lives and key implementation milestones.

What you’ll be working on

You’ll be part of a highly collaborative Ancillary Applications team responsible for implementing, maintaining, and supporting a diverse portfolio of systems used across acute care and specialty institutes. The work includes application configuration, testing, installation, troubleshooting, and ongoing support, as well as coordinating closely with infrastructure teams, vendors, and clinical stakeholders.

There is also a strong focus on modernization. The organization is actively migrating systems to the cloud, reducing technical debt, and replacing legacy platforms, so analysts here are exposed to projects that go well beyond day-to-day support.

This role also involves leading or contributing to projects from early discovery through go-live, helping gather requirements, coordinating technical reviews, and ensuring solutions are implemented correctly and securely.

What they’re hoping to find

• They’re looking for someone who is comfortable operating in a large enterprise environment, can communicate effectively with both technical teams and clinical users, and enjoys taking ownership of projects.
• Strong troubleshooting skills, solid documentation habits, and the ability to manage multiple priorities are all important.
• For one of these openings in particular, experience with Cadwell Arc EEG is especially valuable, along with a solid understanding of how clinical or ancillary applications integrate with broader hospital systems.
• Additional Applications managed by the team also include PeriWatch, Provation, Natus, Cadwell Arc, Airstrip, Computrition, and Spok, among others.
• Experience with similar applications would be acceptable as well if you do not have experience with these applications.

Why this environment stands out

• This is a place where analysts tend to stay. The organization is financially strong, invests heavily in technology, and continues to grow.
• The scale of the environment means exposure to a wide variety of systems and initiatives, and the leadership team actively encourages training, certification, and career progression.
• If you enjoy working on meaningful systems in healthcare, want the stability of a well-run organization, and like being part of projects that modernize and improve large-scale environments, this is a role worth exploring.

Location Detail: MMH-71 Haynes Street (10627)

Work where every moment matters.
 
Every day, over 40,000 Hartford HealthCare colleagues come to work with one thing in common: Pride in what we do, knowing every moment matters here.  We invite you to become part of Connecticut’s most comprehensive healthcare network as a Clinical Nurse Educator.

The Greater Manchester Region has approximately 2,500 employees. It includes Manchester Memorial Hospital, a 249-bed community hospital, Rockville General, a campus of Manchester Memorial Hospital, a 102-bed facility, a large multispecialty provider group and visiting nurse services. The Greater Manchester Region serves a region of 300,000 people in 19 towns.

POSITION SUMMARY:

Under the direct supervision of a Radiologist the CT Technologist performs exams at a technical level that does not require direct supervision over technical detail. This position requires advanced medical imaging knowledge, including skill in cross-sectional anatomy.   A complete knowledge of all types of diagnostic CT exams and interventional procedures is required. Uses independent judgment, ingenuity and acquired knowledge to obtain quality diagnostic images. Assists with interventional procedures. 

COMPETENCIES:

• Must have a full knowledge of CT exams and interventional procedures. Technologist must be capable of performing exams independently. 
• Must have a complete working knowledge in the principals of physics, anatomy, medical terminology, sterile technique and radiation protection as it relates to CT practice.
• Must be able to speak, read and write effectively using the English language. 
• This position requires the incumbent work cooperatively with department staff by sharing in taking rotational call and holiday hours.

ESSENTIAL DUTIES and RESPONSIBILITES:

Disclaimer: Job descriptions are not intended, nor should they be construed to be, exhaustive lists of all responsibilities, skills, efforts or working conditions associated with the job.  They are intended to be accurate reflections of the principal duties and responsibilities of this position.  These responsibilities and competencies listed below may change from time to time.

1.     Assures that patient’s clinical data coincides with and matches the type of exam that is being ordered.  Follows up with Doctor’s office when exam ordered is in question and does not seem reasonable given the patient’s clinical record.

2.     Assist Radiologist in interventional procedures. Coordinates patient’s medical needs with the Radiology Nurse.  Assures that room is properly equipped for procedure and cleaned appropriately post procedure.

3.     Assures female patients of child bearing ages are screened for possibility of pregnancy.

4.     Demonstrates skill in IV insertion.

5.     Documents exams into radiology system to ensure proper billing.

6.     Independently runs one’s own schedule and properly documents patient flow while remaining sensitive to patients care and other co-workers needs and desires.  Remains flexible in patient flow in order to accommodate daily emergency calls and requests for inpatient procedures.  Assists in obtaining transportation for patients when procedures are scheduled by internal Hospitalists, Physicians, etc.

7.     Demonstrates competency in performing all types of CT scans

8.     Processes CT exams utilizing the teleradiology system during off shift hours.  Able to trouble shoot problems and contact correct help lines if necessary.

9.     Demonstrates the ability to choose correct protocols for patients based on age and size.

10.  Accurately completes computer (Meditech) patient procedure documentation.  Assures the accuracy of documentation understanding that all items will be charged to the patient’s hospital bill.  Submits correctly documented and labeled exam to the Radiologist and is available for review and discussion. Reviews each exam for technical accuracy.

11.  Transports patients when needed.

12.   Performs quality assurance in accordance with the American College of Radiology guidelines for CT.

13.  Reviews post instructions to patient (example: hydration, when physician will receive results)

14.  Demonstrates ability to trouble shoot any electronic equipment such as scanner, workstations, and printers.

15.  Independently responds on a call basis to perform procedures.  Drives to affiliate and/or contracted location to provide services as may be required.

16.  Works cooperatively and exhibits Core Values at all time in order to accomplish all tasks as a member of the Medical Imaging Team.

EDUCATION/CERTIFICATION:

• A high school diploma or GED equivalent; graduate of an ARRT approved Radiological Technology School program is required.
• Registration and certification with the American Registry of Radiological Technologists and licensure with the State of Connecticut are required. 
• Must remain current with ARRT continuing education requirements and maintain an active ARRT certificate. 
• Advanced certification from the ARRT in Computerized Tomography is expected from the incumbent within one year of hire. 
• Must have certification in Basic Cardiac Life Support upon hire and maintain clinical competency during employment in this role

We take great care of careers

With locations around the state, Hartford HealthCare offers exciting opportunities for career development and growth.  Here, you are part of an organization on the cutting edge – helping to bring new technologies, breakthrough treatments and community education to countless men, women and children.  We know that a thriving organization starts with thriving colleagues-- we provide a competitive benefits program designed to ensure work/life balance.  Every moment matters.  And this is your moment

In an assigned cell, perform a variety of inspection processes, using various tools and equipment, following standardized methods and established techniques, to verify production process integrity up through and which may include preparation and presentation of parts to customer for Final Inspection or sale. Assist in 1st Article presentations or Production Lot Test initiatives. Accept or reject material based on findings.

TYPICAL DUTIES:

• 
  
• Work from applicable written inspection procedures, drawings, and other pertinent instructions to plan and perform dimensional and visual inspection on parts, tools, gages, and other equipment, accepting material or referring for rework or quality review based on findings.
  
• Use a variety of fixed and variable measuring instruments including computerized machines where program instructions are well defined to check dimensions and recording results. Perform necessary mathematical computations to determine extent of non-conformance and complete appropriate paperwork.
  
• Follow established procedures to perform in-line checks and verification of dimensions and make sure that operation sheets are being followed.
  
• Recognize need and arrange for repair or replacement of equipment used in performing work as necessary.
  
• Support initiatives as directed to reduce MRB and re-work requirements, and assist in the manufacture of quality parts.
  
• Assist on various internal program audits.
  
• May assist others at their direction in the investigation of unusual non-conformances, new or changed inspection sequences, and other specialized assignments within the scope and skill level of this job function.
  
• Support Lean Manufacturing/Continuous Improvement initiatives and function as requested.
  
• Recommend, and participate in environmental health and safety practices.
  
• Refer difficulties to higher-level Inspectors, Lead Person, and /or Supervisor.
  
• Perform routine servicing throughout assigned area following specified procedures, and written instructions, such as operators' checklist, for upkeep and to assure equipment operates properly.
  
• May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individual skills.
  
• May be required to train for, obtain, and maintain licenses, operator permits, and certifications within assigned area or cell.
  

This position is currently accepting applications.

Apply Now

FUNCTION:

In an assigned area or cell, work with limited supervision to perform the assembly of Production aircraft parts as well as the teardown, and assembly of Overhaul & Repair designated aircraft parts.

TYPICAL DUTIES:

• 
  
• Performs fitting and assembly operations on various production aircraft parts.
  

• 
  
• Performs teardown and assembly of overhaul & repair aircraft parts.
  

• 
  
• Cleans and applies special adhesives to materials resulting in a permanent bonding of the materials. Sets up and controls furnace temperature in accordance with established specifications.
  

• 
  
• Must be capable of reading and interpreting blueprints, operation sheets, technical specifications and overhaul manuals.
  

• 
  
• Maintains necessary records and files.
  

• 
  
• Works with limited supervision.
  

• 
  
• Assists operators in a lower classification on assembly techniques as needed.
  

• 
  
• Performs temporary part marking, In process transfer marking and final part parking operations using Vibro Engraving, Electro-chemical Etch, Ink Stamp, Dot-Peening, and Paint marking with suitable legibility to meet drawing or customer specification requirements
  

• 
  
• Works under supervision with salary and hourly support groups to address the most complex problems.
  

• 
  
• Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.
  

• 
  
• Actively participate in various aspects of Lean production and Continuous Improvement projects that drive efficiency improvements.
  

• 
  
• Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
  

• 
  
• May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
  

This position is currently accepting applications.

Apply Now

FUNCTION:

Set up, operate, troubleshoot and perform work on a variety of machinery. Be flexible, willing and capable of being trained on additional machines. Perform work at a consistently high level of quality. Be reliable in consistency of work and willingness to work outside of core area of expertise.

TYPICAL DUTIES:

• 
  
• 
  

  Must be capable & willing to set up operations that have previously been proven out independently without oversight of a leadman or CNC programmer.

  
  
  

• 
  
• 
  

  Must be capable of running a minimum of two of the following machine types: 3 and 4 axis Horizontal and Vertical Machining Centers, 5 axis machining centers, Vertical Turret Lathes, Cylindrical Grinders, Mill/Turn machines, CNC boring machines, Horizontal lathes, manual machines.

  
  
  
• 
  
  

  Must be willing to perform work on machines throughout the shop, not only the machines that are within the person's core area of expertise. For example: must be willing to perform work on a Mitsubishi 4 axis machining center even when the person normally runs a Mazak 730 Variaxis.

  
  
  
• 
  

  Must be capable & willing to identify opportunities for improvement in tooling, cutting methods, mistake proofing & work instruction documentation.

  
  
  
• 
  

  Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.

  
  
  
• 
  

  Actively participate in various aspects of Continuous Improvement projects which may include but is not limited to 5S, TPM, kaizen events, and set-up reduction events, which is aligned with the commitment to continuous improvement activities in Article II of the collective bargaining agreement.

  
  
  
• 
  

  Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.

  
  
  
• 
  

  Must be capable & willing to assist or train other employees in this or lower classifications as needed.

  
  
  
• 
  
  

  Refer difficulties to leader or supervisor as appropriate

  
  
  

  May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.

  
  
  

This position is currently accepting applications.

Apply Now

Job Title: Product Manager (Beazley Digital - API/Services)

Division: Beazley Digital

Reports To: As per Beazley's organisation chart

Key Relationships:

Head of Digital Underwriting, Head of Digital Operations

Within Beazley:CIO, other senior IT Leads, Head of PMO/VRF, Enterprise Architect, Other Product/Project Managers, Commercial Management, Information Security, External Suppliers

Job Summary:

The product manager is accountable for the technology roadmap, design, development, enhancement, delivery, and budgeting for the digital product /technologies they lead. Ensuring technology is aligned to business value, OKRs and target architecture. The role ensures the technology is developed and maintained using sound business and technology management practices and it supports business transformation by enabling new capabilities and growth. Using agile and product management methods to ensure you are "delivering the right thing" in "the right way".

Key Responsibilities:

End-to-end Delivery & Execution

• Own end-to-end delivery of product/technology initiatives, ensuring alignment from discovery through deployment and ongoing optimisation.

• Define clear delivery outcomes, success measures and release plans in partnership with Product, Change, Engineering and business stakeholders.

• Lead prioritisation and execution across the delivery lifecycle, balancing strategic objectives with operational needs.

• Ensure teams remove blockers, maintain delivery momentum and operate with high transparency on progress, risks and dependencies.

• Champion agile ways of working, continuous delivery and automation to accelerate time to value.

• Oversee quality assurance, testing and release management to ensure secure, high-quality, production ready outputs.

• Drive postlaunch monitoring, analytics and continuous improvement to maximise product value and performance.

Strategy and Business Management

• Develop and maintain a strategic product roadmap aligned to OKRs and business plans.

• Partner with the business owner and key users to assess current and future needs and shape multiyear plans.

• Continuously refine governance and decision-making processes across run, grow and transform activity.

• Build, develop and retain a high performing technology delivery team.

• Work with digital leadership to define cost and resourcing models and support effective demand planning.

Budget Management

• Collaborates with the digital leadership team and business owner to make funding and resource reallocation decisions.

• Manages the product budget including run, growth and transform, makes informed and dynamic investment prioritization decisions supported by data.

Technology Management

• Work with Group Technology, Information Security, Data Management and Architecture teams to align and leverage enterprise architecture.

• Oversee day-to-day technology operations and drive continuous improvement in performance, security, availability and usability.

• Define and track channel KPIs to improve adoption, performance and user experience.

• Coordinate with other product managers to avoid duplication and manage interdependencies.

• Manage vendor relationships in line with group frameworks and build strategic partnerships aligned to Beazley Digital's OKRs.

• Embed industry standards and practices such as Agile, DevOps, InfoSec and modern data architecture to ensure resilience and agility.

Digital Transformation

• Act as the technology contact for the product, partnering with cross functional teams to evolve processes and operating models.

• Scale innovation and new insurance propositions into the channel where feasible.

• Recommend business process, commercial and UX improvements to enhance adoption.

• Apply design thinking, customer journey mapping and data insights to drive end-to-end channel value.

• Identify and champion emerging business and technology trends that support channel OKRs.

• Contribute to embedding digital opportunities into Beazley Digital's strategy to drive growth, efficiency and risk reduction.

General:

It is important that within all your interactions both internally and externally you adhere Beazley's core values - Being Bold, Striving for Better, and Doing the Right Thing as they contribute to an internal environment of teamwork and promote a positive brand image and experience to our external customers. We also expect Beazley employees to:

• Comply with Beazley procedures, policies and regulations including the code of conduct which incorporates the PRA and FCA Conduct.

• Undertake training on Beazley policies and procedures as delivered by your line manager, the People & Sustainability or assurance teams (compliance, risk, internal audit) either directly, via e-learning or the learning management system.

• Display business ethics that uphold the interests of all our customers.

• Ensure all interactions with customers are focused on delivering a fair outcome, including having the right products for their needs.

• Comply with any specific responsibilities necessary for your role as outlined by your line manager, the People & Sustainability or assurance teams (compliance, risk, internal audit) and ensure you keep up to date with developments in these areas. This may include, amongst others, Beazley's underwriting control standards, Beazley's claims control standards, other Beazley standards and customer relationship management.

• Carry out additional responsibilities as individually notified, either through your objectives or through the learning management system. These may include membership of any Beazley committees or working groups.

Personal Specification:

Education and Qualifications

• Product Management or Product Owner certification desirable but not essential

• Agile certification desirable but not essential

Skills and Abilities

• Strong business understanding and ability to work in partnership with the business

• Strong Technology Product Management skills and/or Programme Management skills

• Demonstrated ability to manage technology and business change projects with demonstrated delivery of business value and pursuit of quality

• Experienced in change management, able to understand and advise on how to implement process, technology and people changes while minimising the delivery risks

• Understanding of business strategy and the work of the teams within the customer organisation

• Able to identify and help the team assess options and solutions that best fit business requirements

• Proven team management and leadership capability within a change and technology context

Knowledge and Experience

• Previous experience in technology

• Previous experience in budget management

• Previous experience of delivering multiple, complex IT projects, preferably covering the use of internal resources, third party (packaged) solutions and outsourced services

• Previous experience of the use of various analysis and delivery frameworks covering scope definition, planning, budgeting, reporting, management of risks and issues

• Previous experience working with an Agile methodology preferred

• Previous experience building and maintaining effective working relationships

• Previous experience managing an outsourced team

Aptitude and Disposition

• Delivery focussed, self-motivated, flexible and enthusiastic

• Relentless curiosity

• Learning Agility

• Open Disposition

• Judgement

• Digital Acumen

• Customer focus

• Strategic thinking

Competencies

• Proactive

• Information seeking

• Flexible

• Detail oriented

• Purposeful communication

• Leadership

• Team working

• Negotiation and influencing

• Problem solving

• Customer focus

• Decision making

Who We Are:

Beazley is a specialist insurance company with over 30 years' experience helping people, communities and businesses to manage risk all around the world. Our mission is to inspire our clients and people with the confidence and freedom to explore, create and build - to enable businesses to thrive. Our clients want to live and work freely and fully, knowing they are benefitting from the most advanced thinking in the insurance market. Our goal is to become the highest performing sustainable specialist insurer.

Our products are wide ranging, from cyber & tech insurance to marine, healthcare, financial institutions and contingency; covering risks such as the weather, film production or protection from deadly weapons.

Our Culture

We have a wonderful mix of cultures, experiences, and backgrounds at Beazley with over 2,000 of us working around the world.Employee's diversity,experience and passion allow us to keep innovating and moving forward, delivering the best. We are proud of our family-feel culture at Beazley that empowers our staff to work from when and where they want, in an adult environment that is big on collaboration, diversity of thought and personal accountability. Our three core values inspire the way we work and how we treat our people and customers.

• Be bold

• Strive for better

• Do the right thing

Upholding these values every day has enabled us to become an innovative and responsive organization in touch with the changing world around us - our ambitious inclusion & diversity and sustainability targets are testament to this.

We are a flexible and innovative employer offering a friendly, collaborative, and inclusive working environment. We actively encourage and expect applications from all backgrounds. Our commitment to fostering a supportive and dynamic workplace ensures that every employee can thrive and contribute to our collective success. Explore a variety of networks to assist with professional and/or personal development.

Our Employee Networks include:

• Beazley RACE - Including, understanding and celebrating People of Colour

• Beazley SHE - Successful, High potential, Empowered women in insurance

• Beazley Proud - Our global LGBTQ+ community

• Beazley Wellbeing - Supporting employees with their mental wellbeing

• Beazley Families - Supporting families and parents-to-be

We encourage internal career progression at Beazley, giving you all the tools you need to drive your own career here, such as:

• Internal Pathways (helping you grow into an underwriting role)

• iLearn (our own learning & development platform)

• LinkedIn Learning

• Mentorship program

• External qualification sponsorship

• Continuing education and tuition reimbursement

• Secondment assignments

The Rewards

• The opportunity to connect and build long-lasting professional relationships while advancing your career with a growing, dynamic organization

• Attractive base compensation and discretionary performance related bonus

• Competitively priced medical, dental and vision insurance

• Company paid life, and short- and long-term disability insurance

• 401(k) plan with 5% company match and immediate vesting

• 22 days PTO (prorated for 1st calendar year of employment), 11 paid holidays per year, with the ability to flex the religious bank holidays to suit your religious beliefs

• Up to $700 reimbursement for home office setup

• Free in-office lunch, travel reimbursement for travel to office, and monthly lifestyle allowance

• Up to 26 weeks of fully paid parental leave

• Up to 2.5 days paid annually for volunteering at a charity of your choice

• Flexible working policy, trusting our employees to do what works best for them and their teams

Salary for this role will be tailored to the successful individual's location and experience. The expected compensation range for this position is $85,000 - $107,000 per year plus discretionary annual bonus.

Don't meet all the requirements? At Beazley we're committed to building a diverse, inclusive, and authentic workplace. If you're excited about this role but your experience doesn't perfectly align with every requirement and qualification in the job specification, we encourage you to apply anyway. You might just be the right candidate for this, or one of our other roles.

ACCOUNTABILITY:

The position of Cell Leader is a key catalyst on a manufacturing Cell Team, who works in conjunction with Process Engineering, Quality Engineering, and hourly Cell associates to manufacture or assemble a component or major assembly. As such, this individual must supervise a group or groups engaged in various activities in the Operations organization, and act with urgency to direct the resolution of technical and logistics problems and the introduction of measures to improve operations and customer relations.

TYPICAL DUTIES:

• 
  
• Set work priorities aligned to satisfy company, customer demand and on-time delivery metrics. Collaborate with planner and peer Cell Leaders to schedule work through the various manufacturing work centers and manage work center to assure adequate flow of production. Manage line balance ensuring the pacing process is adequately staffed to maintain desired output levels. Hold direct reports accountable to meet Operating, OTD, Quality, and Safety metrics. Ensure direct reports are fully engaged performing value added work.
  
• Develop and implement action plans to meet department goals in the areas of labor efficiency, labor utilization, housekeeping, on-time delivery and productivity improvements. Perform regular daily audits of key processes to ensure optimum process performance and use of latest operation sheets,
  
• Maintain department/cell metrics. Ensure all direct reports understand their cell metrics and how they impact/improve each metric. Monitor Utilization rate in cell is at acceptable level (direct vs. indirect), Labor Efficiency (by person, by job), Quality Performance (Maintain Quality log), enforce work rules (breaks, cell phones, newspapers, etc.), ensure TPM/PM is being completed.
  
• Coach direct reports in maintaining accurate reporting of employee time, vouchering and work performance within the area. Develop and maintain Skills Matrix for accurate identification of workforce capabilities and cross train to support business need.
  
• Encourage employee involvement in and ownership of continuous improvement activities focused on LEAN and waste reduction. Implement and maintain 6S in Cell.
  
• Develop, plan and implement continuous quality improvement through teams within the area of responsibility to attain World Class Quality. Ensure PDR's are written quickly & thoroughly. Initiate PRB review on suspect parts in a timely manner. Support weekly PRB meetings to determine RCCA and develop rework scenarios where possible. Respond to production problems by personally investigating and resolving such problems with hourly and salaried personnel to assure a continuing flow of product. Utilize formal problem solving methodologies to discover and eliminate root cause.
  
• Actively participate, recommend, and initiate improvement in our EH&S practices and procedures.
  
• Reward and recognize associates on a regular basis and support programs that encourage employee involvement and recognition.
  

QUALIFICATIONS:

• 
  
• 5-10 years' experience working in an aerospace manufacturing environment
  
• Prior experience in a unionized facility is preferred
  
• Proficient in Microsoft Office applications
  
• Excellent process and problem solving skills
  
• Effective communication skills, including verbal (logical and organized), written, listening and presentation
  
• Experience with ERP systems
  
• Team player with strong people skills
  
• Ability to communicate with and influence employees and management at all levels
  
• Decisive and capable of dealing with conflict and resolving issues promptly
  
• Take charge individual with clear sense of urgency
  
• Proven track record of meeting commitments with the highest standards of ethics and integrity
  
• Demonstrated experience in continuous improvement initiatives, root cause corrective action methodology, visual factory management, statistical process control techniques, quality assurance processes, coaching and performance management, safety practices, operations metrics/dashboard measurement.
  

EDUCATION:

• 
  
• Bachelor's degree in Operations Management, Business Management or equivalent work experience will be considered.
  

This position is currently accepting applications.

Apply Now

FUNCTION:

Set up, operate, troubleshoot and perform work on a variety of machinery. Be flexible, willing and capable of being trained on additional machines. Perform work at a consistently high level of quality. Be reliable in consistency of work and willingness to work outside of core area of expertise.

TYPICAL DUTIES:

• 
  
• 
  

  Must be capable & willing to set up operations that have previously been proven out independently without oversight of a leadman or CNC programmer.

  
  
  

• 
  
• 
  

  Must be capable of running a minimum of two of the following machine types: 3 and 4 axis Horizontal and Vertical Machining Centers, 5 axis machining centers, Vertical Turret Lathes, Cylindrical Grinders, Mill/Turn machines, CNC boring machines, Horizontal lathes, manual machines.

  
  
  
• 
  
  

  Must be willing to perform work on machines throughout the shop, not only the machines that are within the person's core area of expertise. For example: must be willing to perform work on a Mitsubishi 4 axis machining center even when the person normally runs a Mazak 730 Variaxis.

  
  
  
• 
  

  Must be capable & willing to identify opportunities for improvement in tooling, cutting methods, mistake proofing & work instruction documentation.

  
  
  
• 
  

  Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.

  
  
  
• 
  

  Actively participate in various aspects of Continuous Improvement projects which may include but is not limited to 5S, TPM, kaizen events, and set-up reduction events, which is aligned with the commitment to continuous improvement activities in Article II of the collective bargaining agreement.

  
  
  
• 
  

  Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.

  
  
  
• 
  

  Must be capable & willing to assist or train other employees in this or lower classifications as needed.

  
  
  
• 
  
  

  Refer difficulties to leader or supervisor as appropriate

  
  
  

  May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.

  
  
  

This position is currently accepting applications.

Apply Now