Information Technology Jobs in Andover, MN

Build a Career That Matters with One of the World's Most Respected Employers!

- - - - - - - - - - - -

- - - - - - - - - - - -

Michelin North America, Inc. is hiring a Forklift Tire Technician for Solideal Onsite Service. Together with our numerous partners worldwide, we offer customized services to meet the maintenance requirements of forklift fleets, ensuring safe operations and maximized uptime.

Let us invest in your success as you invest in ours.

Mechanical experience is preferred, but expertise isn't required. We will provide training for any skills required.

Must be 21 years or older.

Hourly wage with excellent benefits like 401(k) matching, paid time off, dental, health and life insurance! Incentive bonus opportunities.

This position is for day shift (start times may vary), 8-hour shifts with overtime available after 40 hours.

As a Forklift Tire Technician, you will give input for customer service and operational improvement. You will continuously improve the knowledge of our products and services and assume full ownership of the position function, with understanding of the role in relation to the success of the Service Center.

Must be able to pass a urine drug screen and DOT physical as a condition of an offer of employment, subject to ADA and reasonable accommodation process. Must be able to pass background check at an appropriate stage consistent with state law as a condition of an offer of employment.

• In-house and onsite installation of forklift and other material handling tires using a hydraulic tire press.
• Dismount, mount tires, and service the customer product as specified by the customer order.
• Perform preventive maintenance and ensure cleanliness of all equipment including service vehicles.
• Report to the Service Manager immediately any material that does not meet quality standards, equipment that requires maintenance, delays at customer sites, potential issues with customer equipment before servicing, accidents or concerns about safety or other potential hazards.
• Job requires regular bending, crouching, squatting, and reaching movements, and standing for prolonged periods.

• A "high school diploma" or equivalent experience.
• A valid driver's license.
• A dedication to prioritize personal safety and the safety of others.
• Punctuality and effective time management skills.
• A strong attention to detail, initiative, and critical thinking.
• Ability to work independently.
• Ability to lift up to 75 pounds required, with lift-assist available IE; forklift, Lift table, Lift Gate etc.
• Effective communication with customers on a professional level.
• Knowledge of MS Office Suite (Word, Excel, etc.) software applications and ERP system are a plus, but not required.

• In a Tobacco-free environment, including alternatives (vaping).
• In a service vehicle exposed to various noises and hot/cold conditions at customer locations (indoor/outdoor).
• In an industrial environment

Competencies Target

• Attention to Detail 3
• Customer Service Relationship 2
• Decision Making 1
• Teamwork & Collaboration 1
• Product Knowledge 2
• Networking 1
• Comply with Applicable Safety & Environment requirements 1

MISSION :

To ensure maintenance of motorized vehicle, forklifts, equipment and accessories of lifting and handling, and eventually technical coordination

Ready to Shape the Future of Innovation?

Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.

The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.

Why Michelin?

• Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.

• Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Connected Communities.

• Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.

• Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.

Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .

This position is not available for immigration sponsorship.

We build the future with people like you. Begin your career with Michelin today!

Mindset is looking for a talented and motivated Account Executive to join our high-performing sales team. This role is ideal for someone who loves to help his or her customers solve their enterprise SAP struggles. This role is a dual-capacity sales role; you will be selling custom development and talent solutions. You will be responsible for acquiring new clients, expanding strategic accounts, and driving revenue by representing Mindset’s full suite of offerings with an emphasis on SAP BTP, SAP BDC, and AI solutions.

As an Account Executive, you will focus on building mutually beneficial partnerships with enterprise-level clients while working closely with internal delivery and solution teams to ensure client success. Your ability to manage the full sales cycle, understand client challenges, and provide tailored solutions will directly impact Mindset’s growth and market presence.

Key Responsibilities

• Identify, qualify, and drive both talent and SAP solutions opportunities focused on BTP, BDC, and AI
• Manage the entire sales cycle from prospecting to contract negotiation and close
• Build and maintain strong relationships with enterprise customers and key decision-makers
• Represent Mindset at industry events, conferences, and networking opportunities (20% plus travel is expected).
• Collaborate with delivery teams to develop proposals and staffing/solutions strategies
• Maintain a strong sales pipeline across staffing, software, and services offerings
• Develop and nurture relationships with partners in the SAP ecosystem (e.g., SAP AEs, service providers)
• Drive revenue through new client acquisition and expansion of existing accounts
• Leverage field relationships and marketing leads to generate new business
• Understand industry trends and proactively position Mindset’s offerings as solutions to client needs

Preferred Skills & Qualifications

• 3–5 years of experience in IT staffing sales, with a solid understanding of the staffing lifecycle
• Previous experience selling IT services or SAP-based (or other ERPs) solutions, including digital transformation, design thinking, or custom development
• Proven success managing large enterprise accounts and consistently exceeding quotas
• Understanding of SAP/ERP ecosystems, ideally with existing relationships
• Excellent verbal, written, and presentation skills; ability to build trust and communicate value
• High emotional intelligence, active listening skills, and a consultative sales approach
• Experience with or other CRM platforms
• Self-motivated, organized, and able to prioritize multiple opportunities effectively

About Mindset

Mindset Consulting merges SAP expertise with human-centered design to help enterprises create software that their employees love to use. Based in Minneapolis, we build intelligent solutions powered by SAP BTP, BDC, and AI — making systems not just powerful, but intuitive, human-centered, and future-ready.

Perks of Working at Mindset

• $80,000-120,000 + commission and benefits
• Annual incentive trip for high achievers
• Headquarters located in innovative offices in the North Loop (Paid parking)
• Ability to work primarily remotely
• Part of a hard-working, fun, motivated team

Mindset’s Diversity and Inclusion Commitment

At Mindset, we are committed to diversity and inclusion not simply as a declaration of intent, but as part of our journey of constant improvement. Mindset’s mission is to provide an inclusive environment where every individual can reach their full potential and make an impact.

Our goal is simple, to make everyone feel welcomed and valued. We believe that diversity of background, thought, experience, and perspective is essential to our top-tier workplace environment and makes us a powerful team that can deliver the highest value to the clients we serve.

Mindset does not discriminate against any employee or applicant for employment on the basis of race, religion, color, creed, national origin, citizenship status, sex, sexual orientation, gender identity and expressions, genetic information, marital status, age, disability, or status as a covered veteran.

Mindset provides our employees with the resources they need to succeed. We recruit, hire, promote, transfer and provide advancement opportunities on the basis of individual qualifications and job performance, and contributions to the performance of the team and

IT Support Technician – Minneapolis, MN (Onsite, Full‑Time)

Provide onsite technical support, troubleshoot hardware/software issues, and ensure smooth daily IT operations.

Key Responsibilities

• Support desktops, laptops, printers, and mobile devices
• Troubleshoot hardware, software, and network issues (Wi‑Fi, LAN, VPN)
• Install/configure OS, apps, and hardware
• Perform maintenance, updates, and break/fix repairs
• Set up new user workstations and peripherals
• Maintain asset inventory and follow ITSM processes
• Support office moves and tech refresh projects
• Escalate advanced issues to L2/L3 and document resolutions

Required Skills

• 2–5 years in IT field/desktop support
• Strong Windows OS, hardware, and basic networking skills
• Experience with AD, Office 365, and ticketing tools
• Ability to repair devices and support users
• Strong communication and independent working abilities

A candidate’s pay within the range will depend on their skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to HCL policies. In addition, this role is eligible for the following benefits subject to HCL policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off (PTO) per year (some positions are eligible for unlimited PTO); and 10 paid holidays per year.

Disclaimer

HCL is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to for investigation.

We are seeking a highly motivated Geotechnical Engineer to join our team and grow with us. The successful candidate will have a solid background in geotechnical engineering and an understanding of chemical grouting and retrofit foundation work. You will have the opportunity to work alongside our subject matter experts and highly skilled implementation teams and with future potential as a practice leader.

This position will be in our geotechnical division which focuses on existing structures challenged by ordinary solutions. Example projects in our business line include soil strengthening and stabilization, such as for existing structures with poor bearing strata; groundwater control and waterproofing for below-grade structures experiencing moisture infiltration; or installation of new micro-pile foundations in industrial plants in congested areas. Our unique solutions include the ability to perform complex chemical grouting and injection work with our specialty-trained crews and equipment.

As a Geotechnical Engineer, you will be responsible for:

· Conducting geotechnical investigations, field exploration, and specifying laboratory testing for various civil and geotechnical engineering projects.

· Preparing geotechnical reports

· Designing foundation retrofits and grouting solutions

· Preparing technical specifications for projects

· Preparing proposals and project schedules

· Resolving complex issues

· Collaborating with project managers, construction managers, and other engineering disciplines to ensure successful project completion

Qualifications:

· Bachelor's degree in Civil or Geotechnical Engineering from an accredited institution.

· 5 years of experience in geotechnical engineering with a focus on soil strengthening and stabilization, groundwater control, and foundation retrofits.

· Professional Engineer (PE) license is preferred.

· Strong analytical and problem-solving skills.

· Ability to work independently and as part of a team.

· Excellent verbal and written communication skills.

· Willingness to travel domestically and internationally as required.

Our ideal candidate is an innovative but decisive engineer who can work effectively in a fast moving highly collaborative, team-based environment; has the ability to set goals and expectations and hold others accountable; can encourage and mentor others; is approachable, empathetic and outgoing; can quickly gain trust and respect; and is able to establish and maintain relationships.

STRUCTURAL TECHNOLOGIES is proud of a company culture that promotes 24/7 safety and quality. We offer competitive compensation and benefits including medical and dental insurance, 401(k), paid holidays, vacation, tuition reimbursement, career development and growth opportunities, and a caring work environment. EOE/M/F/D/V

$80K plus DOE

Job Title: Business Systems Analyst - PowerBI and ERP

Location: Fridley, MN (Hybrid)

Industry: Manufacturing

Salary Range: $75,000–$85,000

If you thrive in a hands-on, fast-paced environment where no two days are the same, this role is for you. As a Business Systems Analyst, you’ll be the go-to expert for ERP support, data management, and business reporting — bridging the gap between technology and operations to keep things running smoothly and efficiently.

What You’ll Do

• Support and enhance ERP systems, driving integrations, updates, and process improvements.
• Gather requirements and translate business needs into smart, scalable solutions.
• Build, automate, and maintain BI reports and dashboards for key decision-makers.
• Develop small applications, scripts, and tools that optimize ERP usability.
• Partner with cross-functional teams on data integrity, project initiatives, and process governance.
• Tackle day-to-day support issues while spotting opportunities for long-term system upgrades.

What You Bring

• Bachelor’s degree in Business, Computer Science, or a related field.
• 1–3 years of experience in ERP support, BI reporting, or business analysis.
• Working knowledge of ERP systems (SAP, Oracle, Microsoft Dynamics; Infor Visual a plus).
• Skills in SQL, Power BI, and scripting (Python, VBScript, PowerShell, or C#).
• Strong communication, problem-solving, and organizational abilities — and a drive to take ownership.

This is a great fit for someone who enjoys variety, solving puzzles, and shaping the way data and technology empower a manufacturing team.

Ensures a resilient environment by proactive TRR testing and selective stress testing of our HA designs.

Prepares and evaluates Disaster Recovery methodologies for use with specific business application environments.

Defines, executes, measures and reports on DR exercising and proactive resiliency testing.

Summary

• 
  
• The Patient Services Representative III Floater PSR III represents the face of our company to patients who come in, both as part of their health routine or for insights into life defining health decisions.
  
• The PSR III draws quality blood samples from patients and prepares those specimens for lab testing while following established practices and procedures.
  
• The PSR III has direct contact with patients and creates an atmosphere of trust and confidence while explaining procedures to patients and drawing blood specimens in a skillful, safe and accurate manner.
  
• The PSR III will demonstrate Leadership Behaviors while focusing on process excellence skills and sensitivity to confidentiality and accuracy to patient information.
  
• Successful applicants may be assigned to a doctors office, a patient service center or as business needs dictate.
  
• Under the direction of the area supervisor, perform daily activities accurately and on time.
  
• Maintain a safe and professional environment.
  
• Performs with confidence, both the forensic and clinical specimen collection and processing duties following established practices and procedures.
  
• Perform verification of patient demographic info initials including patient signature post venipuncture to verify tubes were labeled in their presence and that the name on the label is correct.
  
• Maintains required records and documentation.
  
• Demonstrates organizational commitment and promotes a positive image to patients, clients, employees and the public in general.
  

Job Requirements

• 
  
• Ability to provide quality, error free work in a fast paced environment. Ability to work independently with minimal onsite supervision.
  
• Excellent phlebotomy skills to include pediatric and geriatric.
  
• Flexible and available based on staffing needs, which includes weekends, holidays, on call and overtime.
  
• Committed to all Policies Procedures including Company dress code, Employee Health Safety, and Everyday Excellence Guiding Principles.
  
• Must be able to make decisions based on established procedures and exercise good judgment.
  
• Must have reliable transportation, valid driver license, and clean driving record, if applicable.
  
• Travel and flexible hours required to work multiple locations and required to cover at Patient Service CenterInOffice Phlebotomy locations with minimal notice.
  
• Capable of handling multiple priorities in a high volume setting.
  
• Must demonstrate Superior Customer Focus ability to communicate openly and transparently with peers, supervisors and patients ability to accelerate and embrace change and knowledge of our business.
  
• Training locations may vary based on trainer availability.
  

Required Education

• 
  
• High school diploma or equivalent.
  
• Medical training: medical assistant or paramedic training preferred.
  
• Phlebotomy certification preferred. Required in California, Nevada, and Washington.
  

Work Experience

• 
  
• The Patient Services Representative II (PSR II) represents the face of our company to patients who come in, both as part of their health routine or for insights into life-defining health decisions. The PSR II draws quality blood samples from patients and prepares those specimens for lab testing while following established practices and procedures. The PSR II has direct contact with patients and creates an atmosphere of trust and confidence while explaining procedures to patients and drawing blood specimens in a skillful, safe and accurate manner. The PSR II will demonstrate Leadership Behaviors while focusing on process excellence skills and sensitivity to confidentiality and accuracy to patient information. Successful applicants may be assigned to a doctor's office, a patient service center or as business needs dictate.
  
  
• Under the direction of the area supervisor, perform daily activities accurately and on time.
  
• Maintain a safe and professional environment.
  
• Performs with confidence, both the forensic and clinical specimen collection and processing duties following established practices and procedures.
  
• Perform verification of patient demographic info / initials including patient signature post-venipuncture to verify tubes were labeled in their presence and that the name on the label is correct.
  
• Maintains required records and documentation.
  
• Demonstrates organizational commitment and promotes a positive image to patients, clients, employees and the public in general.
  

• 
  
• Ability to provide quality, error free work in a fast-paced environment.
  
• Ability to work independently with minimal on-site supervision.
  
• Excellent phlebotomy skills to include pediatric and geriatric.
  
• Flexible and available based on staffing needs, which includes weekends, holidays, on-call and overtime.
  
• Committed to all Policies & Procedures including Company dress code, Employee Health & Safety, and Everyday Excellence Guiding Principles.
  
• Must be able to make decisions based on established procedures and exercise good judgment.
  
• Must have reliable transportation, valid driver license, and clean driving record, if applicable.
  
• Travel and flexible hours required to work multiple locations and required to cover at Patient Service Center/In-Office Phlebotomy locations with minimal notice.
  
• Capable of handling multiple priorities in a high-volume setting.
  
• Must demonstrate Superior Customer Focus; ability to communicate openly and transparently with peers, supervisors and patients; ability to accelerate and embrace change; and knowledge of our business.
  

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Job Summary:

The RF Microelectronics/Module Design & Foundry Services Department at Raytheon in Andover, MA, is currently seeking a Principal Electro-Mechanical Engineer to develop leading-edge miniaturized 3DHI sensors and systems to enable future generation technologies across Raytheon.

The successful candidate will be a highly motivated “self-starter” who will apply strong mechanical and electrical engineering skills to implement innovative solutions to challenging design criteria. They will be involved in research efforts including initial concepts, advanced technology demonstrations, and will have the opportunity to follow product development from beginning to end, including documentation, fabrication, assembly, and test/delivery of a range of microelectronics products. This position requires strong interpersonal, written, and verbal communication skills to maintain positive relationships & satisfaction with Program leadership (Engineering and Program Management). Knowledge of semiconductor manufacturing processes and materials and prior experience working with contract manufacturers (OSATs) is highly desired.

The role requires knowledge of high-density microelectronic packaging designs including Interposers, organic substrates, wafer and chip bumping and general knowledge in areas of electronic components/devices such as ASICs and FPGAs, design of electronic packaging chassis and structures, interconnects (connectors/cables), and thermal management design of high-density electronic systems and electronic enclosures. The successful candidate will have the ability to bring new and fresh ideas to the team, with opportunities to explore research and innovation areas in a collaborative and fun team environment. Additionally, the candidate is expected to follow established procedures in creation of technical data package work products, while working closely with program management and functional supervision to ensure the overall design objectives are met.

What You Will Do:

• Work with cross-functional hardware engineering teams to develop advanced microelectronics packages including 3DHI, 3D, and 2.5D (interposer + chiplets) and novel material and process solutions for RF, digital, mixed-signal, and photonics products
• Leverage industry-leading manufacturing and novel materials to achieve new levels of electro-mechanical performance and reliability

Qualifications You Must Have:

• Typically requires a Bachelor’s Degree in a Science, Technology, Engineering & Math (STEM) Field and a minimum of   Eight (8) or more years of relevant experience (An advanced STEM degree could count for 3 years of experience) with mechanical and electrical engineering design.
• Experience performing circuit layout design using 2D CAD tools
• The ability to obtain and maintain a US security clearance. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer:

• A Master’s degree or PhD. in a Science, Technology, Engineering & Math (STEM) Field 
• Experience in RF circuit design, including 3D EM simulation in HFSS or similar tools
• Circuit layout design experience using 2D and 3D CAD tools (Cadence Virtuoso and/or Allegro/APD+)
• Experience and familiarity with selection and oversight for semiconductor wafer processing and finishing (plating, bumping, dicing)
• Design experience with 3D and 2.5D packaging, complex CAD/EDA software design workflows, and RF/Thermal/Digital co-design
• Experience qualifying and implementing cutting edge materials, fabrication techniques, and understanding of relevant materials used in semiconductor manufacturing and packaging
• Strong background in development, documentation, fabrication, assembly, and test/delivery of military/defense and/or commercial state-of-the-art electronic products
• Experience with designing electronics for extreme environmental requirements and design constraints
• Proficiency with 3D Mechanical CAD modeling and analysis tools (e.g., Solidworks, Creo).
• Experience in Geometric Dimensioning and Tolerance analysis for drawings
• Current DoD Secret level security clearance
• Innovative attitude to apply towards research and development of new technologies
• Excellent interpersonal and multi-tasking skills
• Excellent written and verbal communication skills
• Ability to work independently and in a team environment, including as a leader of small teams

What We Offer:

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Manufacturing Engineers develop and improve manufacturing processes by studying products and manufacturing methods. They provide premier engineering and manufacturing support expertise to enable on-time, lowest-cost hardware delivery with performance and reliability that exceeds customer expectations. They execute across all phases of a program including proposal capture, process development, transition to production, and production support. Manufacturing Engineers design, control, and improve the manufacturing process and system design through a collaborative effort with the value stream team. You would apply your skills to implement improvements that reduce cycle time and cost and improve productivity, while maintaining a high level of safety in the manufacturing environment and quality within the product.

What You Will Do

• Develop, maintain, and review Manufacturing Data Packages (MDPs) including assembly instructions, workflow/routing, labor standards, tool and fixture designs

• Support a manufacturing area as part of cross-functional team by guiding the production team through process troubleshooting and incorporation of engineering changes into the MDP

• Disposition non-conforming material with root cause and corrective action analysis as required

• Drive Continuous Improvement through process improvements to improve cycle time, reduce ergonomic risk to assemblers, automate, reduce costs (both direct and indirect) using CORE principles and data driven decision making

• Provide real-time technical support to manufacturers and fabricators; in-house as well as the supply base.

Qualifications You Must Have

• Typically requires a Bachelors degree in Science, Technology, Engineering or Math (STEM) and a minimum 2 years of prior relevant experience. 

• 1+ year of working in a manufacturing environment

• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• Proficiency with CAD solid modeling tools (preference for CREO/ProE) and/or simulation tools

• Experience with designing, programming, maintaining, and troubleshooting automated tooling and machinery

• Experience with military and industry standards

• Familiarity with standard material handling practices, especially as they pertain to Electrostatic Discharge mitigation requirements

• Active DoD security clearance

• Proficient use of Microsoft Office suite (Excel, Powerpoint, Project, Word, etc…)

• Proven written and oral communication skills, including presentation skills

• Self-motivated and results oriented individual with an ability to work in a team environment and with minimal direct supervision

• Demonstrated hands-on mechanical aptitude with the ability to work across disciplines

• Innovative mindset that drives continuous improvement and keeps pace with advances in technology

• Excellent organizational skills with fine attention to detail and an ability to manage multiple tasks simultaneously

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is not available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms