Information Technology For Development Jobs in Everett Washington Remote

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Power Plant B to become part of our Join and Installation team in Everett and Kent, Washington.

Join our dynamic team as an Assembler Power Plant B, where your skills will be pivotal in constructing and assembling critical aircraft components. In this essential role, you will utilize production drawings and specifications to accurately install, fit, and align parts for power packs and strut assemblies. Your attention to detail will ensure that each component is meticulously drilled, reamed, and riveted, while your expertise in pre-assembly will streamline the process for wiring harnesses and tubing assemblies. You will operate advanced material handling equipment to efficiently load and unload engines and struts. Your ability to verify dimensions and check for defects will be crucial in maintaining our commitment to excellence. If you are passionate about aviation and thrive in a collaborative environment, we invite you to contribute to our mission of delivering high-quality aircraft systems.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Install, fit, fasten, align, adjust, and connect parts and assemblies to build aircraft power packs and strut assemblies.

• Use production drawings, specifications, and assembly pages to derive measurements and locate points for part marking and layout preparation.

• Perform drilling, reaming, riveting, and soldering necessary for assembly tasks.

• Review work orders and installation plans to determine job priorities and obtain appropriate drawings and production illustrations.

• Obtain and verify kitted detail parts and assemblies, ensuring they are correct and free of defects.

• Pre-assemble components such as wiring harnesses and tubing assemblies using power and hand tools.

• Operate material handling equipment, including overhead cranes and scissor lifts, to load and unload engines and struts.

• Align parts and assemblies to mating surfaces, temporarily securing them in place and checking for proper alignment.

• Attach, seal, and connect parts, assemblies, and wires using the correct fasteners and tools, tightening per specifications.

• Torque fasteners and install safety devices such as lock wires and cotter pins as required by drawings or specifications.

• Seal hydraulic fittings and access doors, applying necessary fluids, primers, and adhesives according to specifications.

• Operate various tools, including pull rivet guns and countersinks, to fasten and torque parts and assemblies.

• Verify close tolerance dimensions using precision measuring tools and check work for defects before inspection.

• Maintain personal and tool certifications, ensuring compliance with safety and operational standards.

• Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed, while consulting with engineering and planning as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Do you meet this requirement?

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.

• 1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to lift up to 35 pounds.

• This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• 1+ years of experience performing aircraft structural work or equivalate.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program

Conflict of Interest: 

• Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

• High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

• Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

• This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Safety Sensitive Statement:

• This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.00/hour, with potential to earn up to $55.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing's Global Real Estate and Facilities (GREF) organization is seeking a Maintenance Plumber to join our team in Everett, Washington. You will be supporting building & ground maintenance and initial installations. Our team supports a 24/7 operation, based on business needs.

This role allows you to obtain a variety of skillsets, the opportunity to learn from knowledgeable colleagues, and to work on critical maintenance plumbing solutions for major Boeing sites. You will receive both on-the-job & formal training to enhance your technical skills, and backflow licensing is provided by the company. Incentives include additional pay for obtaining trade licenses paid by the company as well as receiving shift differential pay for second and third shift. This position is also eligible for overtime hours and pay.

Position Responsibilities:

• Perform routine diagnosing, testing, and repairing of all types of plumbing lines and fixtures

• Repair, construct, install, rebuild, adjust, and modify plumbing lines and fixtures

• Layout, construct, maintain, diagnose, repair, adjust, modify, rebuild and test plant facilities plumbing, such as air, gas, and water, and drain line, sprinkler systems; gasoline pumps and related systems; high and low pressure steam equipment; liquid, air and vacuum pumps and accessories; pneumatic controls; various regulating and other valves; oxygen, hydrogen and hydraulic systems; boiler and furnace burners, baffles, pilot lights, governors, floats, strainers and oil pumps

• Perform work described in other maintenance classifications when incidental but necessary to the accomplishment of the assignment

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 1+ years of experience in the plumbing or pipefitting trade

• Ability to perform work at heights up to 125 feet about ground level with appropriate safety gear and pass fall protection training

• Willingness to work any shift as required

Preferred Qualifications:

• 1+ years of experience working with any of the following: backflow prevention, chemical process tank lines, or high-pressure steam systems

• 1+ years of experience working in an industrial/manufacturing environment

• Possess related plumbing certification (e.g., backflow, fitter)                                                 

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations. 

Summary pay range: $33.32 per hour – $61.01 per hour

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Join Our Team as a Website Tester at Little Wheel

Little Wheel is a gambling technology company focused on researching and building products that put players first. We are currently hiring Website Testers across Michigan, New Jersey, Pennsylvania, and West Virginia.

This is a great opportunity to earn extra income on a flexible schedule while helping us test online casinos. No prior experience is required, and all training is provided.

This is a short-term contract, with opportunities for ongoing work for high performers.

Role Overview

As a Website Tester, you will:

• Participate in user experience testing on various online casino platforms.
• Follow step-by-step instructions to complete assigned tasks.
• Record feedback and report bugs or usability issues.
• Provide detailed insights into your testing experience.
• Complete all testing assignments within set timelines.

Requirements

To be eligible, you must:

• Be at least 21 years old.
• Reside in one of the following states: Michigan, New Jersey, Pennsylvania, or West Virginia.
• Own a laptop or desktop computer.
• Be able to complete a short, paid online training and onboarding process.

No previous testing or gambling experience is needed. You will not be gambling with your own money, and there are no fees or out-of-pocket costs. All the interactions/game-play would be for testing purposes.

Compensation and Benefits

• Guaranteed earnings of at least $1,000 for approximately 20 hours of testing.
• Minimum of $25/hour, with higher pay for faster testers.
• $100 bonus upon completing the onboarding program.
• Flexible schedule – choose when you want to work.
• Work from home – test websites from the comfort of your own space.
• Fast payments – get paid after each of the 4 testing stages.
• Excellent support – coordinators available daily from 6 AM to 11 PM ET.

What Our Testers Say

"Great side gig for some extra cash. The team is very communicative and will answer any questions/concerns!" – Maria, Trustpilot (2021)

"Tasks are clearly explained with step-by-step instructions. You can work when it's convenient. Support is very helpful and responsive." – Anonymous, Glassdoor (2025)

Read more reviews on Glassdoor, Trustpilot, and Google.

Equal Opportunity Statement

Little Wheel LLC is proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment for all applicants and employees, regardless of race, religion, color, national origin, gender identity, sexual orientation, age, disability, or veteran status. We celebrate diversity and strive to create a workplace where everyone feels valued.

Company Info

Website: Address: Little Wheel LLC, 250 Pehle Ave, Suite 200, Saddle Brook, NJ 07663 Phone: (833) 313-7490

Join Our Team as a Website Tester at Little Wheel

Little Wheel is a gambling technology company focused on researching and building products that put players first. We are currently hiring Website Testers across Michigan, New Jersey, Pennsylvania, and West Virginia.

This is a great opportunity to earn extra income on a flexible schedule while helping us test online casinos. No prior experience is required, and all training is provided.

This is a short-term contract, with opportunities for ongoing work for high performers.

Role Overview

As a Website Tester, you will:

• Participate in user experience testing on various online casino platforms.
• Follow step-by-step instructions to complete assigned tasks.
• Record feedback and report bugs or usability issues.
• Provide detailed insights into your testing experience.
• Complete all testing assignments within set timelines.

Requirements

To be eligible, you must:

• Be at least 21 years old.
• Reside in one of the following states: Michigan, New Jersey, Pennsylvania, or West Virginia.
• Own a laptop or desktop computer.
• Be able to complete a short, paid online training and onboarding process.

No previous testing or gambling experience is needed. You will not be gambling with your own money, and there are no fees or out-of-pocket costs. All the interactions/game-play would be for testing purposes.

Compensation and Benefits

• Guaranteed earnings of at least $1,000 for approximately 20 hours of testing.
• Minimum of $25/hour, with higher pay for faster testers.
• $100 bonus upon completing the onboarding program.
• Flexible schedule – choose when you want to work.
• Work from home – test websites from the comfort of your own space.
• Fast payments – get paid after each of the 4 testing stages.
• Excellent support – coordinators available daily from 6 AM to 11 PM ET.

What Our Testers Say

"Great side gig for some extra cash. The team is very communicative and will answer any questions/concerns!" – Maria, Trustpilot (2021)

"Tasks are clearly explained with step-by-step instructions. You can work when it's convenient. Support is very helpful and responsive." – Anonymous, Glassdoor (2025)

Read more reviews on Glassdoor, Trustpilot, and Google.

Equal Opportunity Statement

Little Wheel LLC is proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment for all applicants and employees, regardless of race, religion, color, national origin, gender identity, sexual orientation, age, disability, or veteran status. We celebrate diversity and strive to create a workplace where everyone feels valued.

Company Info

Website: Address: Little Wheel LLC, 250 Pehle Ave, Suite 200, Saddle Brook, NJ 07663 Phone: (833) 313-7490

Our biotech client is seeking a Communications Project Manager to support Corporate Communications and R&D Communications in a part-time freelance capacity.

This is an ongoing 20 hours/week role with an expected duration of 6 months, with potential to extend. This position is fully remote and you will be reporting directly to the VP, Enterprise Communications.

The Communications Project Manager will serve as an operational and organizational engine for two fast-moving communications teams. This role ensures projects progress on schedule, leadership receives accurate and timely reporting, and executive-ready materials are consistently delivered. The ideal candidate is proactive, highly organized, experienced in cross-functional communications, and comfortable working directly with senior leaders.

Responsibilities

• Compile weekly project updates for the VP to support executive staff meeting discussions.
• Prepare and maintain monthly team reports for Corporate Communications and R&D Communications.
• Build quarterly business reviews (QBRs), consolidating inputs from multiple workstreams into executive-ready presentations.
• Create and update executive briefing books (1-2 per week), synthesizing complex information into clear, strategic narratives.
• Attend weekly team meetings (Wednesdays at 10 AM PST and Thursdays at 11 AM PST), maintaining agendas, tracking follow-ups, and ensuring all commitments are completed.
• Coordinate project inputs across cross-functional partners; track progress, identify risks, and flag blockers.
• Gather updates from stakeholders and ensure completeness, clarity, and alignment to team priorities.
• Synthesize themes across projects to identify patterns, insights, and strategic throughlines for reporting.
• Prepare materials in polished, executive-ready formats.
• Maintain project trackers, shared documents, and operational workflows across Airtable, OneNote, and Teams.
• Support the operational organization of both communications teams as they undergo structural changes, helping maintain consistency, accountability, and predictable information flow.

Requirements

• Minimum of 3 years of experience in project management, communications, executive support, or similar roles
• Experience supporting executive communications or communications teams.
• Strong organizational skills with demonstrated success managing multiple deadlines and stakeholder inputs.
• Proactive, self-starting working style with a Type A attention to detail.
• Exceptional written communication skills and comfort preparing executive-level materials.
• Ability to confidently engage senior leaders to request updates, clarify details, and push for high quality inputs.
• Comfortable synthesizing information and identifying key themes, insights, and priorities.
• Strong collaboration skills and a personable, professional presence.

Software Required:

• Airtable
• Workfront
• PowerPoint
• OneNote

In this position, you may have access to client or customer systems, confidential and/or proprietary information or data, including medical data.

Benefits

Join Our Team as a Website Tester at Little Wheel

Little Wheel is a gambling technology company focused on researching and building products that put players first. We are currently hiring Website Testers across Michigan, New Jersey, Pennsylvania, and West Virginia.

This is a great opportunity to earn extra income on a flexible schedule while helping us test online casinos. No prior experience is required, and all training is provided.

This is a short-term contract, with opportunities for ongoing work for high performers.

Role Overview

As a Website Tester, you will:

• Participate in user experience testing on various online casino platforms.
• Follow step-by-step instructions to complete assigned tasks.
• Record feedback and report bugs or usability issues.
• Provide detailed insights into your testing experience.
• Complete all testing assignments within set timelines.

Requirements

To be eligible, you must:

• Be at least 21 years old.
• Reside in one of the following states: Michigan, New Jersey, Pennsylvania, or West Virginia.
• Own a laptop or desktop computer.
• Be able to complete a short, paid online training and onboarding process.

No previous testing or gambling experience is needed. You will not be gambling with your own money, and there are no fees or out-of-pocket costs. All the interactions/game-play would be for testing purposes.

Compensation and Benefits

• Guaranteed earnings of at least $1,000 for approximately 20 hours of testing.
• Minimum of $25/hour, with higher pay for faster testers.
• $100 bonus upon completing the onboarding program.
• Flexible schedule – choose when you want to work.
• Work from home – test websites from the comfort of your own space.
• Fast payments – get paid after each of the 4 testing stages.
• Excellent support – coordinators available daily from 6 AM to 11 PM ET.

What Our Testers Say

"Great side gig for some extra cash. The team is very communicative and will answer any questions/concerns!" – Maria, Trustpilot (2021)

"Tasks are clearly explained with step-by-step instructions. You can work when it's convenient. Support is very helpful and responsive." – Anonymous, Glassdoor (2025)

Read more reviews on Glassdoor, Trustpilot, and Google.

Equal Opportunity Statement

Little Wheel LLC is proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment for all applicants and employees, regardless of race, religion, color, national origin, gender identity, sexual orientation, age, disability, or veteran status. We celebrate diversity and strive to create a workplace where everyone feels valued.

Company Info

Website: Address: Little Wheel LLC, 250 Pehle Ave, Suite 200, Saddle Brook, NJ 07663 Phone: (833) 313-7490

Join Our Team as a Website Tester at Little Wheel

Little Wheel is a gambling technology company focused on researching and building products that put players first. We are currently hiring Website Testers across Michigan, New Jersey, Pennsylvania, and West Virginia.

This is a great opportunity to earn extra income on a flexible schedule while helping us test online casinos. No prior experience is required, and all training is provided.

This is a short-term contract, with opportunities for ongoing work for high performers.

Role Overview

As a Website Tester, you will:

• Participate in user experience testing on various online casino platforms.
• Follow step-by-step instructions to complete assigned tasks.
• Record feedback and report bugs or usability issues.
• Provide detailed insights into your testing experience.
• Complete all testing assignments within set timelines.

Requirements

To be eligible, you must:

• Be at least 21 years old.
• Reside in one of the following states: Michigan, New Jersey, Pennsylvania, or West Virginia.
• Own a laptop or desktop computer.
• Be able to complete a short, paid online training and onboarding process.

No previous testing or gambling experience is needed. You will not be gambling with your own money, and there are no fees or out-of-pocket costs. All the interactions/game-play would be for testing purposes.

Compensation and Benefits

• Guaranteed earnings of at least $1,000 for approximately 20 hours of testing.
• Minimum of $25/hour, with higher pay for faster testers.
• $100 bonus upon completing the onboarding program.
• Flexible schedule – choose when you want to work.
• Work from home – test websites from the comfort of your own space.
• Fast payments – get paid after each of the 4 testing stages.
• Excellent support – coordinators available daily from 6 AM to 11 PM ET.

What Our Testers Say

"Great side gig for some extra cash. The team is very communicative and will answer any questions/concerns!" – Maria, Trustpilot (2021)

"Tasks are clearly explained with step-by-step instructions. You can work when it's convenient. Support is very helpful and responsive." – Anonymous, Glassdoor (2025)

Read more reviews on Glassdoor, Trustpilot, and Google.

Equal Opportunity Statement

Little Wheel LLC is proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment for all applicants and employees, regardless of race, religion, color, national origin, gender identity, sexual orientation, age, disability, or veteran status. We celebrate diversity and strive to create a workplace where everyone feels valued.

Company Info

Website: Address: Little Wheel LLC, 250 Pehle Ave, Suite 200, Saddle Brook, NJ 07663 Phone: (833) 313-7490