Information Technology For Development Jobs in Bothell King County, WA

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

City of Kirkland

$24.22 - $27.26 Hourly

Kirkland WA 98033, WA

Seasonal

202100751

Public Works - Maint. Center Public Grounds

03/03/2026

Non-Exempt

N/A

Spend your summer outdoors helping keep Kirkland beautiful!

The City of Kirkland's Public Works Department is hiring Public Grounds Seasonal Laborers to join our Grounds Division team. In this role, you'll help maintain the landscapes that make Kirkland shine - from City buildings and medians to green spaces and retention ponds. You'll also play a part in caring for Kirkland's growing urban tree canopy while gaining hands-on experience using a variety of landscaping tools and equipment.

This seasonal role is a great way to build skills and explore a future career in Public Works! Seasonal roles can also be a great foot in the door future full-time opportunities with the City.

These are short-term seasonal positions lasting up to six months.

Job Summary
Performs general labor tasks as assigned to contribute to the development and maintenance of City public grounds. This position may have a significant focus on our urban tree canopy.

Distinguishing Characteristics: The Public Works seasonal employees will be responsible for maintaining our landscape infrastructure throughout City owned buildings, medians, and retention ponds. An emphasized focus on supporting the urban tree canopy will be a primary function of this job. This position will also use a variety of manual labor and mechanical techniques to complete tasks during their shift. This is a temporary, seasonal position.

Essential Functions: Essential functions, as defined under the Americans with Disabilities Act, may include any of the following representative duties, knowledge, and skills. This is not a comprehensive listing of all functions and duties performed by incumbents of this class; employees may be assigned duties which are not listed below; reasonable accommodations will be made as required. The job description does not constitute an employment agreement and is subject to change at any time by the employer. Essential duties and responsibilities may include, but are not limited to, the following:

• Arboricultural maintenance:
  • Waters street trees using a mobile truck mounted water tank unit.
  • Monitors new trees for pest and health issues.
  • Performs minor pruning as needed.
• Horticultural maintenance: Performs flower and shrub care and garden bed weeding.
• Hand mows storm ponds and spaces not accessible by tractor-mowers.
• Trims grass and cuts weeds with an edger or grass trimmer.
• Removes debris with mechanical blower.
• Makes garbage runs at City facilities, including emptying garbage cans and picking up litter and debris.
• Performs landscape installation to include planting, weeding, and bed maintenance at City of Kirkland facilities and public rights of way. .
• Fosters a positive and supportive work environment; promotes diversity, equity, inclusion, and belonging in the workplace, contributing to an environment of respectful living and working in a multicultural society.

• Assists with hand equipment maintenance.
• Sets up equipment where necessary.
• Paints and stains as needed.
• Other duties as assigned.

• Basic knowledge and/or experience in landscape services.
• Basic knowledge in landscape maintenance.
• Skills to use basic mowing equipment.
• Basic knowledge of horticulture.
• Ability to read directional maps.

Minimum Qualifications:

• Education: No minimum education requirement.
• Experience: Basic experience in landscape services.
• Or: In place of the above requirements, the incumbent may possess any combination of relevant education and experience which would demonstrate the individual's knowledge, skill, and ability to proficiently perform the essential duties and responsibilities listed above.

• Must meet minimum age requirements under Department of Labor and Industries regulations.
• Must have a valid Washington State Driver's license and ability to remain insurable under the City's insurance to operate motor vehicles.

Physical Demands and Working Environment:
Must be able to move objects weighing up to 50 pounds. Walk, kneel, bend for extended periods of time. Performs work outdoors in inclement weather. May work weekends or staggered schedule.

The City of Kirkland is a welcoming community where every person can thrive and grow. We value diversity, inclusion, belonging, and work together to support our community. We do this by solving problems, focusing on the customer, and respecting all people who come into the City whether to visit, live, or work. As an Equal Opportunity Employer, we are committed to creating a workforce that does not discriminate on the basis of race, sex, age, color, sexual orientation, religion, national origin, marital status, genetic information, veteran status, disability, or any other basis prohibited by federal, state or local law. We encourage qualified applicants of all backgrounds and identities to apply to our job postings. Persons with a disability who need reasonable accommodations in the application or testing process, or those needing this announcement in an alternative format, may call or Telecommunications Device for the Deaf 711.

City of Kirkland

$22.80 - $27.22 Hourly

Kirkland, WA

Seasonal

202100700

Parks & Community Services - PCS Teen Coordinator

12/23/2025

Continuous

Non-Exempt

N/A

The Cooking Instructor teaches teenagers easy dorm-room style recipes using small appliances (such as microwaves, electric griddles, and air fryers), as well as traditional kitchen-based recipes that introduce teens to core cooking skills. The ideal instructor enjoys working with teenagers, can create a positive learning environment, and incorporates creativity into each session.

Job Summary

• Prepare and organize cooking supplies and utensils before each class; cleanup space after each class.
• Provide a welcoming environment that fosters fun, flexibility, and creativity into each session.
• Teaches program participants proper and safe use of a variety of kitchen appliances, as well as traditional kitchen-based tools.
• Leads engaging, beginner-friendly cooking classes for teens ages 11-18.
• Develop recipes and curriculum that are simple and budget friendly.
• Communicate effectively with youth, offering guidance and encouragement throughout the lesson.
• Maintain reliable and punctual attendance.
• Represent the City in a positive and professional manner with program participants.
• Follow/adhere to all city policies and procedures, and safety program regulations and requirements.

Hours of Work

This role is expected to begin in mid-April. The applicant must be available on Saturdays, from 10:00AM - 1:00PM. Classes occur once a month throughout the calendar year.

Knowledge, Skills, and Abilities

• Demonstrated knowledge of cooking using a variety of kitchen appliances.
• Patience and empathy.
• Good communication skills.
• Ability to interact courteously and professionally with the public.
• Ability to work independently or as part of a team.
• Demonstrated good judgment in problem solving and responding to customer needs.

Minimum Qualifications

• 1 year of experience working with and teaching youth.
• 1 year of experience in customer service.
• Applicants must possess or be able to obtain First Aid/CPR/AED certification prior to the position start date.
• Applicant must possess or be able to obtain Food Handler's License upon hire.
• Applicants must be at least 18 years or older by the start date.
• Must successfully pass all phases of the pre-employment hiring process, including but not limited to reference checks and a national criminal background check as required by the Child/Adult Abuse Information Act.

Preferred Qualifications

• 2 years of experience teaching youth (ages 11-18).
• 2 years of experience teaching cooking.

Physical Demands and Working Environment:
Work may be performed in a variety of indoor and outdoor settings, including City facilities such as community centers, City parks, Lake Washington School District facilities and off-site locations. Work settings may involve high levels of noise, many people, adverse weather conditions, uneven terrain, standing for extended periods of time, and interruptions. Desk assignments are done at a computer terminal.

Position requires a resume and cover letter for consideration of application. Please note how you meet minimum qualifications within the cover letter. Applicants who are selected for next steps in the hiring process will be invited by phone or e-mail. Candidates are encouraged to apply at the earliest possible date as screening, interviewing, and hiring decisions will be made through the recruitment period, until such time as the vacancy is filled. Job is open until filled with first review of applications will be by 15th day of original posting.

The City of Kirkland is a welcoming community where every person can thrive and grow. We value diversity, inclusion, belonging, and work together to support our community. We do this by solving problems, focusing on the customer, and respecting all people who come into the City whether to visit, live, or work. As an Equal Opportunity Employer, we are committed to creating a workforce that does not discriminate on the basis of race, sex, age, color, sexual orientation, religion, national origin, marital status, genetic information, veteran status, disability, or any other basis prohibited by federal, state or local law. We encourage qualified applicants of all backgrounds and identities to apply to our job postings. Persons with a disability who need reasonable accommodations in the application or testing process, or those needing this announcement in an alternative format, may call or Telecommunications Device for the Deaf at 711.

City of Kirkland

$24.82 - $29.64 Hourly

Peter Kirk Pool - 340 Kirkland Ave, WA

Seasonal

202100732

Parks & Community Services - Aquatics Coordinator

02/11/2026

Continuous

Non-Exempt

N/A

Aquatics - Aquatic Program Supervisor - Pool & Beach

Pay Rate: $24.82 - $29.64

The City of Kirkland is hiring for the Peter Kirk Pool and Kirkland's three swimming beaches. We are looking for Aquatic Program Supervisor (APS) for our pool and swimming beaches this upcoming Summer Season. Please see details on the position below.

Ready to take your lifeguarding and leadership skills to the next level? The City of Kirkland is hiring an Aquatic Program Supervisor (APS) to lead our aquatics team at the Peter Kirk Pool and Kirkland's three public swimming beaches this summer.

In this key leadership role, you'll mentor and train lifeguards, oversee swim lessons, provide exceptional customer service, and help keep the community safe and confident in the water. This is a hands-on, rewarding opportunity to build your leadership experience, guide a dedicated team, and make a real difference in the lives of swimmers of all ages.

This is a leadership position that requires previous senior lifeguarding experience. Join us to mentor new lifeguard staff, support Senior Lifeguards in developing their leadership abilities, and continue building your own leadership skills, all while promoting water safety and serving your community this summer!

• Good verbal, written, and telephone communication skills are required.
• Ability to interact courteously with the public to acknowledge both compliments and complaints.
• Ability to work independently and as part of a team.
• Demonstrated good judgement in problem solving and responding to customer needs.
• Proficiency in standard computer software, such as Microsoft Office Suite applications Word, Excel and Outlook

• A current American Red Cross Lifeguarding certification is required on or before the first day of employment.
• Minimum of one season of aquatics experience as a senior lifeguard, senior instructor or equivalent.
• Minimum 19 years of age.
• Must be able to pass the Aquatics Skill Checks.
• Successful completion of a thorough background check as required by the Child/Adult Abuse Information Act
• May be required to possess a Washington State driver's license and submit a driving abstract, depending on area of assignment in order to drive a City vehicle for official job duties.

Preferred Qualifications

• Current ARC Water Safety Instructor (WSI) and/or Lifeguard Instructor (LGI) certifications preferred.

Special Note
Applicants are encouraged to submit their profiles at the earliest possible date as screening, interviewing, and hiring decisions will be made throughout the recruitment period, until such time as all vacancies are filled. Interviews will be scheduled in March and April. The position and interviews will close on Friday, April 18th.

Hours of Work
Employee may work daytime, evenings and weekends, depending on programming needs and facility coverage, mid-May to mid-September. Work schedule and needs may fluctuate during periods of low attendance and poor weather days. Must be available to work on July 4th

Selection Process
Applicants who meet the minimum qualifications and requirements for the advertised position(s) will be invited by phone or email to interview. Position open until filled. First review of applicants 15 days after initial post.

Candidates who are selected to interview will be required to complete a criminal background check.

The City of Kirkland is a welcoming community where every person can thrive and grow. We value diversity, inclusion, belonging, and work together to support our community. We do this by solving problems, focusing on the customer, and respecting all people who come into the City whether to visit, live, or work. As an Equal Opportunity Employer, we are committed to creating a workforce that does not discriminate on the basis of race, sex, age, color, sexual orientation, religion, national origin, marital status, genetic information, veteran status, disability, or any other basis prohibited by federal, state or local law. We encourage qualified applicants of all backgrounds and identities to apply to our job postings. Persons with a disability who need reasonable accommodations in the application or testing process, or those needing this announcement in an alternative format, may call or Telecommunications Device for the Deaf at 711.

City of Kirkland

$46.92 - $55.20 Hourly

Kirkland, WA

Seasonal

202100717

Planning & Building - Inspection

01/22/2026

Continuous

Non-Exempt

N/A

Note: This is an On-Call position that is not eligible for benefits.

Being an on-call employee means that your work schedule is not guaranteed, hours worked could range from 0 - 40 hours a week, depending on office needs. All hours worked are subject to Department of Retirement Services and Affordable Care Act reporting requirements. More information will be shared during the interview, and we encourage questions about the program.

• Inspect buildings and structures to ensure compliance with laws, codes, and regulations relating to building construction, mechanical systems, plumbing systems, state energy code requirements, local zoning requirements, and job site erosion control.
• Investigate compliance complaints and, if necessary, mediate a resolution.

• Conducts site inspections of new and old commercial and residential buildings and structures to ensure compliance with approved plans and codes, notes violations. Approved plans will be reviewed, are posted on the construction site, and are reviewed by the inspector to see that they are properly implemented. Reinspects to ensure all noted violations have been corrected. The incumbent has the authority to stop work on a construction site if code violations are not corrected and makes the final approval of a structure prior to occupancy.
• Plans and schedules routes in order to ensure the most efficient use of time.
• Answers questions and provides technical advice related to building and structure code compliance.
• Investigates and responds to complaints regarding code compliance; informs individual making the complaint if a violation occurred and, if so, what corrective action has been taken.
• Logs daily inspections and prepares inspection reports.
• Reads special inspection reports for compliance and files reports.
• Inspects sites for grading and soil excavation or other land modifications. Makes a visual survey of the construction site to determine if a licensed survey is to be required for setback verification.
• Responds to public and contractor inquiries concerning interpretation of the National Electrical and related codes, construction problems, and City administrative procedures. This requires clear, concise, oral and written communication skills.
• Monitors construction to see that it is completed before occupancy of the building, the permit expires, or sees that the permit is renewed in a timely fashion.
• Maintains adequate records to assure proper documentation of inspections.
• Inspects nonstructural problems with building sites, such as surface water problems and inadequate access, and assures that they are corrected or referred to the appropriate City department.
• Position requires daily use of computer. Incumbent must have, or be able to learn, basic keyboard and computer skills.
• Performs daily inspections of vehicles to include checking tires and lights and determining if service is necessary.
• Fosters a positive and supportive work environment; promotes diversity, equity, inclusion, and belonging in the workplace, contributing to an environment of respectful living and working in a multicultural society.

• Attends staff meetings to discuss Building Department and City issues and to discuss changes in policy and codes.
• The incumbent is expected to perform as an emergency worker in the event of a disaster.
• Performs functions as assigned in the City's emergency response plan in the event of an emergency.

• Knowledge of local, state, and regional/international building codes.
• Considerable knowledge of the standards and practices of building construction, mechanical systems, plumbing systems.
• Maintains knowledge of the various changes in local, state, and regional/international building codes which are of technological changes in building materials and changing architectural philosophies. This will require attendance at college-level courses and/or trade seminars as they become available, provided they are necessary to achieve objectives.
• Knowledge of construction techniques and material.
• Must have or be able to learn basic keyboard and computer skills.
• Skill in reading and understanding blueprints and drawings.
• Skill in interpreting codes.
• Skill in organizing and prioritizing tasks.
• Must be able to communicate orally and in writing in a clear, concise, and diplomatic manner.
• Communication and interpersonal skills as applied to interaction with engineers, architects, coworkers, supervisor, the general public etc. sufficient to exchange or convey information and to receive work direction.
• Must be able to navigate typical construction sites which involve walking, climbing ladders/scaffolding, crawling, and being exposed to inclement weather conditions.

Minimum Qualifications:

• Education: High school diploma or GED.
• Experience: 3 years of construction or inspection experience.
• Or: In place of the above requirements, the incumbent may possess any combination of relevant education and experience which would demonstrate the individual's knowledge, skill, and ability to proficiently perform the essential duties and responsibilities listed above.

• Must have a valid Washington State Driver's license and ability to remain insurable under the City's insurance to operate motor vehicles.
• Possess and maintain ICC Residential Building Inspector (B1) certification within 1 year.
• Must have good oral and written communication skills.

Physical Demands and Working Environment:
The position is driving to or being at construction sites a majority of the time. Potential hazards at construction sites might include falling objects, loose footing, and construction equipment. The position may be required to climb ladders, occasionally walk on scaffolding, crawl in crawl spaces, and be exposed to inclement weather and adverse conditions. The incumbent is expected to perform as an emergency worker in the event of a disaster.
Positions in this class typically involve indoor and outdoor work in extreme variable temperature and atmospheric conditions. Duties may require extended periods of talking or listening, climbing, balancing, stooping, kneeling, crawling, reaching, standing, walking, fingering, feeling, and seeing. Incumbents may be subjected to being around moving mechanical parts, vibration, fumes, odors, gasses, poor ventilation, inadequate lighting, work space restrictions, intense noises, and travel.
Work typically includes exerting up to 50 pounds of force occasionally and/or up to 35 pounds of force more frequently, and/or negligible amount of force constantly to move objects.
This position encounters foot hazards as defined by the WAC, which may include any of the following: falling objects, rolling objects, piercing/cutting injuries, or electrical hazards.

Position requires a resume and cover letter for consideration of application. Please note how you meet minimum qualifications within the cover letter. Applicants who are selected for next steps in the hiring process will be invited by phone or e-mail. Candidates are encouraged to apply at the earliest possible date as screening, interviewing, and hiring decisions will be made through the recruitment period, until such time as the vacancy is filled. First review of applicants will be 15 days after original posting date.

The City of Kirkland is a welcoming community where every person can thrive and grow. We value diversity, inclusion, belonging, and work together to support our community. We do this by solving problems, focusing on the customer, and respecting all people who come into the City whether to visit, live, or work. As an Equal Opportunity Employer, we are committed to creating a workforce that does not discriminate on the basis of race, sex, age, color, sexual orientation, religion, national origin, marital status, genetic information, veteran status, disability, or any other basis prohibited by federal, state or local law. We encourage qualified applicants of all backgrounds and identities to apply to our job postings. Persons with a disability who need reasonable accommodations in the application or testing process, or those needing this announcement in an alternative format, may call or Telecommunications Device for the Deaf at 711.