Information Technology And Management Jobs in Edwards, IL

• Serves as the LPHA for Integrated Assessment and Treatment Plan (IATP) Ensures the IATP is compliant with regulations and best practices
• Provides clinical feedback and guidance to clinicians to ensure medical necessity and diagnosis are supported.
• Ensures appropriate treatment recommendations Ensures completion of risk assessment and appropriate safety planning steps.
• Ensures completion of all required screening and/or assessment tools and utilization of results in treatment planning.
• Completes documentation supporting all activities related to review and authorization of the IATP.
• Performs diagnostic assessments, collects diagnostic information, and determines immediate treatment plan needs with patients.
• Requests medical consultation, where indicated, in a diligent and timely manner.
• Completes treatment plan in conjunction with patient, identifying goals/objectives that are connected to needs identified in the assessment.
• Provides behavioral health therapy to individuals, families and/or groups identified as having behavioral health needs.
• Coordinates with Emergency Response Service and other crisis service teams for clients presenting who may be a danger to self or others.
• Maintains records in accordance with TrilliumPlace policies, as well as state and federal oversight agencies and accreditation agencies including Joint Commission, Medicaid, Medicaid Rehabilitation Option, Illinois Department of Public Health, and Commercial Insurances.
• Acts as a liaison and resource between the community and patient needs; coordinates treatment goals with community agencies, primary care physicians, court system, and managed-care entities.
• May provide supervision to Carle Health clinicians who provide assessment and treatment.
• May supervise counseling or social work students assigned to department.
• Participates in in-service and competency training of students or staff. Prepares special reports as needed on activities, and work group activities.
• Meets clinical productivity standards and compliance standards for all documentation and clinical charts.

Doctor of Medicine | Oncology - General/Other

Location: Peoria, IL

Employer: Adelphi Locums

Pay: Competitive weekly pay (inquire for details)

Start Date: ASAP

LocumJobsOnline is working with Adelphi Locums to find a qualified Oncology MD in Peoria, Illinois, 61637!

JOB OVERVIEW

• Job Title: Medical Oncologist
  
• Job Type: Locum Tenens
  
• Location: Peoria, IL
  
• Service Setting: Hospital and Outpatient Practice
  
• Coverage Type: Clinical Only
  
• Coverage Period: 11/3/2025 Ongoing (initial 3-month assignment)
  
• Clinical Shift Schedule: Mon Fri, 7:30a 5:30p (810 hour shifts) COVERAGE DATES
  
• 3 days per week, for 3 months (12 shifts/month estimated)
  
• Start date: 11/3/2025
  

• Patient Demographics: Adult Oncology
  
• Admissions: Yes, as required for oncology patients
  
• Rounding: Yes, hospital rounding as needed
  
• Case Mix: Medical Oncology (consults, admissions, follow-ups, multidisciplinary cancer care)
  

• Trauma Level: Level I
  
• EMR System: Epic
  
• Specialty Backup Available: Multidisciplinary cancer team support
  
• Support Staff: Advanced Practice Provider (APP) support
  
• Reason for Coverage: New position; launching new Medical Oncology practice
  
• Privileges: Full Privileges; Temporary Privileges available
  

• Hospital Privileges Required: Yes
  
• Temporary Privileges Available: Yes
  
• Credentialing Timeline: 60 days
  

• Travel, Lodging, and Malpractice Insurance: Covered
  
• Rate: TBD REQUIRED PROCEDURES
  
• Provide consultations, admissions, and follow-up oncology care
  
• Conduct hospital rounding as needed
  
• Collaborate with APPs for consults, follow-ups, orders, and patient management
  

• Licenses: Active Illinois license
  
• Board: Board Certified or Board Eligible in Medical Oncology
  
• DEA: Active DEA required
  
• Certifications: ACLS required; CSR license required
  
• Experience: Minimum 1 year in specialty
  
• Other Qualifications: Ability to coordinate care with multidisciplinary cancer team
  

• Provide direct patient care including consultations, admissions, and follow-up care
  
• Conduct hospital rounding as needed
  
• Collaborate with in-practice APPs for patient management
  
• Coordinate care with the multidisciplinary cancer team
  
• Provide coverage when the PRN Medical Oncologist is not on-site
  

About Adelphi Locums

Adelphi Locums, a brand of Adelphi Staffing, provides locum tenens staffing solutions for healthcare facilities across the U.S., connecting them with qualified physicians, advanced practitioners, and other medical professionals for temporary coverage needs.

1660284EXPPLAT

Job Title: 3D Printing Technician

Location: Mossville, IL

Contract duration: 12 month contract with potential for extension or conversion

Job Summary

We are seeking a hands-on 3D Printing Technician to support daily production across SLS, SLA, LPBF, FDM, and DLS platforms. This role offers technical variety, daily problem-solving, and the opportunity to directly influence part quality, repeatability, and throughput in a dynamic, safety-focused engineering environment. You will work side-by-side with our engineering team to interpret build intent, execute precise machine turnovers, drive reliable post-processing, and continuously improve processes and workflow.

Position’s Contributions to Work Group:

• Prepare, start, and monitor additive manufacturing builds across multiple technologies. (e.g., SLS, LPBF, FDM, SLA, and DLS)
• Post process/finish parts and perform visual inspections against drawings/routers; identify common defects and document findings
• Package parts per site standards; protect, label, and hand off to shipping.
• Perform basic maintenance on equipment and escalate as needed.
• Maintain 5S; manage materials with correct labeling and storage.
• Communicate status/risks early; collaborate with engineers on root cause & prevention.

Qualifications:

Preferred

• Manufacturing or additive experience (professional or maker/hobbyist).
• Finishing/body work.
• Post processing/assembly

Physical Requirements

• Stand/sit for extended periods; perform repetitive operations.
• Lift up to 35 lbs.
• Close visual acuity for small parts/defects.

Education & Experience Required:

• Years of experience: 3-5 years – not necessarily relevant experience; any work exp
• Degree requirement: High School Diploma
• Do you accept internships as job experience: Yes
• Are there past or additional job titles or roles that would provide comparable background to this role: Any Technician role

Top 3 Skills

• Detail Oriented
• Time Management
• Mechanical Aptitude

Additional Technical Skills

(Desired)

• Familiar with Microsoft office suite

Soft Skills

(Desired)

• Any experience with assembly or finishing

Screening questions:

Do you now or in the future require sponsorship (e.g. H-1B)? Y/N

EEO and ADA Statement:

Consulting Solutions and its family of companies is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

If you are a person with a disability needing assistance with the application or at any point in the hiring process, please contact us at:

Job Title: Electrical Designer

Location: Peoria, IL

Employment Type: Long term

Job Summary

We are seeking an experienced Electrical Designer to support the design and development of off-highway vehicle electrical systems. The ideal candidate will have strong hands-on experience in electrical design and documentation, including 2D/3D drawings, harness routing, enclosure modeling, and BOM creation, with solid exposure to off-highway or heavy equipment applications. This role requires close collaboration with cross-functional and offshore teams to deliver accurate, manufacturable electrical designs.

Key Responsibilities

• Develop detailed electrical design drawings, plans, and diagrams based on design specifications
• Create and maintain 3D models for:
• Enclosure assemblies and installations
• Electrical harnesses, cable routing, and electrical fitment layouts
• Translate sketches, specifications, and verbal instructions into accurate engineering drawings, including:
• Flattened production drawings
• 2D to 3D associative models
• Ensure designs comply with applicable engineering standards, codes, and regulations
• Collaborate with operations and manufacturing teams to identify drawing-related issues
• Work closely with design engineers to clarify design intent and resolve design issues
• Modify and revise drawings based on design changes and engineering feedback
• Create and maintain Bills of Materials (BOMs) and supporting manufacturing documentation
• Coordinate with multi-disciplinary engineering teams to confirm component locations and develop models for:
• Electrical brackets
• Cable trays
• Enclosures and mounting structures
• Maintain accurate engineering documentation, drawing control, and version management
• Work effectively with offshore engineering teams to support design execution
• Demonstrate strong communication and collaboration skills

Required Skills & Experience

• 5–7 years of experience as an Electrical Designer in off-highway or heavy equipment vehicle design
• Strong experience creating electrical drawings, harness layouts, and installation designs
• Proficiency in:
• SolidWorks
• AutoCAD Electrical
• Experience with 2D/3D drawing association and flattened production drawings
• Knowledge of engineering standards and best practices for electrical design
• Experience creating and maintaining BOMs and manufacturing documentation
• Ability to work collaboratively with cross-functional and offshore teams

Preferred Qualifications

• Experience working on construction, mining, or off-highway equipment
• Familiarity with electrical fitment of brackets, trays, and enclosures
• Bachelor’s or Master’s degree in Electrical, Mechanical, or related Engineering discipline

Principal Duties/Responsibilities:

• 
  
• Partners with business subject-matter experts to translate business requirements into technical solutions
  
• Partners with Software engineers to translate business requirements into a technical requirements and solutions
  
• Partners with solution architects to provide a scalable and adaptable architectural solution
  
• Seamlessly integrates business and service strategy into enterprise architecture roadmap
  
• Promotes the use of a shared infrastructure and application roadmap to reduce costs and improve how information flows
  
• Prepares Business Process Model and Notation for as-is and to-be analysis
  
• Identifies opportunities to define/follow standard operating procedures
  
• Coordinates project efficiency and resources
  
• Manages process changes and effectively communicates with leadership status
  
• Applies knowledge of business process modelling notations (BPMN, EPC, BPEL) to documenting processes
  
• Performs data analysis utilizing SQL and other tools as necessary
  
• Facilitates requirements prioritization based on business value
  

Knowledge, Skills, Abilities (KSAs), & Competencies:

Essential KSAs:

• 
  
• Bachelor's degree in computer science management information systems, engineering or related field and three to five years of experience; or equivalent combination of both
  
• Ability to interpret business and technical documents
  
• Intermediate understanding of enterprise architecture and its organizational impact
  
• Ability to create compelling business cases with accurate cost and effort estimations
  
• Ability to quickly troubleshoot problems that may arise in work products
  
• Ability to work independently and effectively
  
• Ability to work on multiple tasks at any one time while maintaining high quality standards
  

Desirable KSAs:

• 
  
• Experience with RUP, Agile, Scrum, or TDD preferred
  
• Excellent written and verbal communication skills
  
• Intermediate understanding of information risk and enterprise architecture standards
  
• Intermediate understanding of various software development lifecycles
  
• Excellent software engineering skills ensuring sound technical solutions
  

Competencies:

• 
  
• Personal Discipline
  
• Communications
  
• Customer Focus
  

Physical Demands and Working Conditions:

While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; stoop, kneel, crouch; and talk or hear. The employee is also required to use a telephone with headset for verbal troubleshooting, frequent use of a standard keyboard and computer to document calls in a ticketing system, and occasional use of other office equipment. The employee must occasionally lift and/or move more than 30 pounds. The employee is occasionally required to sit for long periods and use close and color vision. Work is typically performed in a moderately noisy business office.

ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more.

Principal Duties/Responsibilities:

* Identifies magnitude of error sources contributing to uncertainty of results through root cause analysis to determine reliability of measurement process in quantitative terms

* Redesigns or adjusts measurement capability to minimize errors

* Develops and/or validates calibration methods, techniques, and procedures based on principles of measurement science, technical analysis of measurement problems, and accuracy and precision requirements

* Creates documentation and reporting to adhere to national and/or international testing standards, including ISO17025

* Provides leadership, direction and technical guidance to calibration specialists, technicians and administrative staff

* Provides high-level technical expertise, oversight and project management support for the operations of the Standards Laboratory, Measuring & Test Equipment (M&TE) related services, and Quality Assurance (QA) requirements for internal and external customers

Knowledge, Skills, Abilities, & Behaviors Required:

* Bachelor's degree in Engineering, Physics, or related field and five years metrology, engineering or operation and maintenance experience; or equivalent combination of education and experience

* At least five years previous experience working in an industry related to calibration and/or M&TE

* Experience performing data collection and calculations for measurement uncertainties

* Expert knowledge in areas of metrology, including Flow, Electrical, Dimensional, and Physical

* Ability to formulate policies and procedures relevant to program areas based on information of a conceptual nature from varied and complex sources

* Demonstrated success gaining an internationally recognized accreditation in calibration and/or testing, including ISO17025, Z540

Physical Demands and Working Conditions:

While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors.

ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more.

Doctor of Medicine | Pediatrics - General/Other

Location: Peoria, IL

Employer: GHR Healthcare

Pay: $3,040 to $3,260 per week

Shift Information: 3 days x 12 hours

Contract Duration: 13 Weeks

Start Date: ASAP

LocumJobsOnline is working with GHR Healthcare to find a qualified Pediatrics MD in Peoria, Illinois, 61637!

Pediatrics | Physician – Pediatric Urology | Peoria, IL (61637)

Provide locum tenens physician coverage in Peoria, Illinois with a weekend call schedule. This opportunity supports pediatric urology patient care with on-site response when needed at the facility in Peoria, IL.

• 
  
• Weekly Estimated Pay: $3040–$3260
  
• Pay Rates:
  
  • 
    
  • Weekend Call: $145
    
  • Clinic: $425–$450
    
  • Night Call Back: $450–$500
    
  • Night Call: $950–$1000
    
  • Weekend Call Back: $450–$500
    
  
  

• 
  
• Position Type: Locum tenens (travel physician job)
  
• Specialty: Pediatric Urology
  
• Location: On-site as needed (call-based); Peoria, IL 61637
  
• Start Date: 12/26/2025
  
• End Date: 03/27/2026
  
• Schedule: Weekend coverage only (call-based)
  
• Shift Duration: 12 Hour Any
  
• Typical Weekend Coverage Window: Friday 8:00 AM – Sunday 6:00 PM (occasionally extends to Monday 8:00 AM)
  
• Coverage Structure: Call coverage with on-site response only when called in
  
• Hours/Week: 36 (as scheduled/needed)
  
• Additional Coverage: Potential weekday clinic coverage as needed to support provider PTO
  

Peoria offers a welcoming community with access to dining, arts, and outdoor recreation along the Illinois River—an easy Midwest destination for a locum assignment.

• 
  
• Licensure: Must have a active Il license
  
• Degree: MD or DO (required)
  
• Availability: Ability to provide weekend call coverage and respond on-site when called in
  
• Teamwork: Comfortable coordinating care with consulting services as appropriate
  

• 
  
• Provide inpatient coverage and weekend call support for pediatric urology
  
• Evaluate and manage consults during call coverage
  
• Respond on-site when called in to support patient care and procedural needs
  
• Collaborate with Pediatric Surgery as needed
  
• Support occasional weekday clinic coverage when needed for provider PTO coverage
  

Apply now to be considered for this Pediatrics | Physician – Pediatric Urology weekend call opportunity in Peoria, IL.

GHR Healthcare offers 401K with Matching, Healthcare, Dental and Vision to Employees. Company paid malpractice is available for 1099 Contractors. Weekly Direct Deposit is a standard benefit for both employees and contractors.

We are an equal opportunity employer and value diversity across our organization. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

About GHR Healthcare

At GHR Healthcare Locums, we do more than fill jobs—we create opportunities that fit your life. With over 30 years of experience, we connect physicians, advanced practice providers and CRNA's with high-quality locum tenens assignments across the country. From top-tier pay to seamless support with licensing, travel, and credentialing, we make every step easy. Whether you're seeking flexibility, freedom, or a fresh start, we’re here to get you where you want to go—on your terms.

1708584EXPPLAT

The Engineering Aide III supports engineering teams by applying engineering techniques, assisting with testing and inspections, performing light fabrication, and preparing documentation, reports, and analyses. This role is hands-on and lab-focused, providing essential operational and technical support to enable engineers to efficiently progress projects.

Key Responsibilities

• Support engineering projects by conducting inspections, analytical tests, and data analysis.
• Collect, analyze, synthesize, and summarize test data; generate reports, charts, and presentations.
• Assist with root cause analysis and support corrective actions.
• Prepare and modify drawings, schematics, and diagrams based on engineering direction.
• Build electrical/mechanical harnesses and perform light fabrication and assembly tasks.
• Set up and execute functional and environmental tests following provided test plans.
• Maintain quality standards through testing, process evaluation, and documentation.
• Track expenses and assist with basic cost-benefit analyses.
• Support lab operations, equipment setup, and general lab organization.
• Collaborate with multiple engineers, prioritize tasks, and communicate timelines clearly.

Required Skills & Qualifications

Education & Experience

• Associate’s degree in Engineering Technology or a related field
• Minimum 2+ years of relevant experience
• Internship experience may be considered

Technical Skills (Required)

• Ability to read and interpret schematics, diagrams, and drawings
• Experience hand-fabricating electrical or mechanical harnesses
• Familiarity with environmental testing (thermal chambers, vibration systems, pressure equipment, etc.)
• Proficiency with Microsoft Word and Excel for documentation and reporting
• Comfortable using standard hand tools for mechanical and electrical assembly/disassembly
• Basic understanding of engineering principles and manufacturing standards

Technical Skills (Desired)

• Light fabrication skills (sheet metal or similar methods)
• Experience with thermocouple instrumentation or thermal testing of electronics
• Basic PCB or SMT soldering experience (or willingness to learn)
• Exposure to procurement processes or laboratory purchasing
• Understanding of domestic and international shipping procedures

Soft Skills

• Strong verbal and written communication skills
• Highly organized and detail-oriented
• Strong analytical and problem-solving abilities
• Self-motivated with a proactive approach to work
• Team-oriented and able to work with multiple stakeholders
• Willingness to learn new tools, systems, and test methods

Principal Duties/Responsibilities:

* Repairs complex electronic and/or mechanical equipment at component level.

* Performs complex new product development.

* Communicates with customers and may travel to customer sites.

* Designs fixtures and performs warranty and root-cause analysis.

* Reviews standard repair processes and develops cycle time improvements.

* Takes the responsibility in setting the standards/methods for testing methodology.

* Processes required service report paperwork.

* Assists less experienced technicians and provides direction and guidance and may provide backup for department.

* Participates in ATS Culture Initiative; continually improves processes; quantitatively monitors processes. Completes required quality core classes and uses skills and techniques presented. Uses the Core Values in work environment. Adheres to company/customer safety procedures.

Knowledge, Skills, Abilities (KSAs), & Competencies:

Essential KSAs:

* Associate's degree (A. A.) or equivalent from two-year college or technical school; and more than ten years related experience and/or training; or twelve years equivalent combination of education and experience.

* Must possess an advanced level of electronic and/or mechanical skills.

* Ability to: read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals; write routine reports and correspondence; speak effectively before groups of customers or employees of organization; calculate figures and amounts such as proportions, percentages, area, circumference, and volume; apply concepts of basic algebra, physics and geometry; apply common sense understanding to carry out instructions furnished in written, oral, or diagram form; deal with problems involving several concrete variables in standardized situations.

Desirable KSAs:

* Team player

* Organized

* Self-motivated and able to prioritize

* must have a good driving record

Competencies:

* Continuous Improvement

* Customer Focus

* Problem Solving

* Customer Focus

* Safety

Physical Demands and Working Conditions:

While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floor

ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more.

Principal Duties/Responsibilities:

* Issues tools, equipment or parts to workers and maintains records issued and returned.

* Locates lost or misplaced tools, equipment or parts.

* Receives, unpacks, and stores incoming tools, equipment or parts, and requisitions stock to replenish inventory.

* Inputs all required data into business operations software, purchasing, and receiving process requirements.

* Inspects and tools, equipment or parts for defects and wear and reports damage or wear to supervisors.

* Keeps all parts clean and orderly in the proper locations.

* Performs clerical activities as directed by manager.

* Participates actively in the weekly and monthly team meetings.

* May interface with purchasing, receiving, and business operations software; repair, service or lubricate tools and equipment; deliver tools or equipment to workers, manually or using handtruck; mark and identify tools and equipment, using identification tag, stamp, or electric marking tool.

Knowledge, Skills, Abilities, & Behaviors Required:

* High school diploma or equivalent (GED) and one year related experience; or equivalent combination of education and experience which provides the required knowledge, skills, and abilities.

Competencies Required:

Physical Demands and Working Conditions:

While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors.

ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more.