How To Install Cable Deck Railing Jobs in Usa

Cable Technician - Onsite in Arlington, VA

Your Impact
Own your opportunity to support mission-critical operations for the largest government agency in the nation. Make a meaningful impact by advancing the Department of Defense's mission to keep our country safe and secure.

Job Description:

AGE Solutions is looking for a Cable Technician to join our team onsite at the Pentagon in Arlington, VA in support of our DoD customer. Due to the nature of work this role entails, telecommuting is not permitted and will require the employee to report full-time onsite.

The Cable Technician is responsible for installation and documentation of new and/or updated Inside Plant cable infrastructure to include conduit, cable trays, copper, coax, fiber and all associated elements in the Pentagon, Mark Center & buildings within the National Capital Region (NCR).

Responsibilities Include:

• 
  
• Analyzes, administers, and maintains telecommunications and network cabling infrastructure.
  
• Responsible for tasks assigned by Coordinators in connection with service orders and repair activities related to Category 6 cabling, Voice over IP networks (VOIP), and fiber optic cabling infrastructure.
  
• Installs, maintains and repairs voice and data communications systems.
  
• Interprets service orders, circuit diagrams, and electrical schematics.
  
• Tests, locates, installs, and repairs cabling infrastructure associated with trouble calls, and performs routine maintenance.
  
• Verifies work order information and receipt of all necessary equipment and information.
  
• Verifies service by testing installed cabling, identifying, correcting, or escalating problems.
  
• Well versed in the use of network cabling test equipment including network testers, copper cable testers, fiber OTDRs and fiber power meters.
  
• Documents network by labeling and routing equipment and cables; recording configuration diagrams and specifications.
  
• Maintains network by troubleshooting and repairing outages; testing network back-up procedures; updating documentation.
  
• Identify, track and remove abandoned cable, and keep cable neatly tied and bundled while maintaining safety standards.
  
• Dress, terminate and test cables and components including CAT6 and fiber optic cabling.
  
• Must follow JSP and commercial best practice procedures, standards required for installation of cable racks, wiring of the racks and testing required during installation.
  
• Participates in special projects as required.
  

What you'll need to succeed (Required):

• 
  
• Citizenship and Clearance:
  
  • 
    
  • US Citizenship is required.
    
  • Must have and maintain an active DoD Top Secret security clearance.
    
  
  
  
• Education:
  
  • 
    
  • Associate's degree.
    
  • An additional 2 years of related technical experience may be substituted in lieu of degree.
    
  
  
  
• Years of Experience:
  
  • 
    
  • A minimum of 3 years' experience (5 years without an associate degree)
    
  
  
  
• Skills and Knowledge:
  
  • 
    
  • Must be familiar with BICSI rules, regulations, and standards.
    
  • Must have the ability to communicate effectively to personnel of various expertise levels, possess robust customer support skills in a high visibility environment, and maintain a high attention to detail and accuracy.
    
  • In-depth knowledge of TDM networks.
    
  • Ability to work with power tools and ladders.
    
  • Ability to work well with others and communicate with supervisors.
    
  • Computer literate with basic Networking Skills.
    
  • Maintain current knowledge of relevant technologies as assigned.
    
  
  
  
• Travel Required: 25-50%
  

Preferred Qualifications:

• 
  
• Certification:
  
  • 
    
  • BICSI Installer 1 (INST1) | Building Industry Consulting Service International (BICSI) - Must be willing to obtain within 90 days of joining.
    
  
  
  

Work Environment and Physical Demand:

• 
  
• Prolonged periods of sitting and working at a computer.
  
• May require ability to lift up to 50 lbs.
  
• May require the ability to crawl on the floor and in tight spaces, and climb ladders and elevated platforms to install equipment, cables, and fiber.
  

Compensation: $65,000+

At AGE Solutions, we reward performance, invest in growth, and share success. Our benefits support the whole person, professionally, financially, and personally.

• 
  
• 26 Days Paid Leave: Includes vacation, sick, personal time, and holidays. You choose how to use it.
  
• Performance Bonuses: Performance bonuses are awarded based on individual contributions and company-wide results, aligning recognition with impact.
  
• 401(k) with Match: We match 3% of your contributions with immediate vesting.
  
• Financial Protection: Company-paid life insurance up to $300K and options for additional coverage for you and your dependents.
  
• Health Benefits: Multiple medical plans, dental, vision, FSA and HSA options to fit your needs.
  
• Parental Leave: 15 days of fully paid leave for new parents, because family matters.
  
• Military Differential Pay: We bridge the gap for employees on active duty, so they don't take a financial hit while serving.
  
• Professional Growth: Paid training and certifications, tuition reimbursement, and the tools and tech to get the job done right.
  
• Shared Success: In the event of a company sale, our CEO has committed to returning 80% of net proceeds to employees. This ensures our team shares in the long term value they help create.
  

At AGE, you'll do work that matters, supported by a company that delivers for its people.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:  

• This position is for a variety of shifts  

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

The Installation Technician is responsible for the successful installation of equipment in an efficient and consistent manner, while working with a team to achieve a common goal of timely project completion. KHI is dedicated to satisfying the objectives of the client and KHI together. All efforts are made to keep the focus on accomplishing tasks while developing personal friendly and polite relationships with clients.

Client goal: Complete the job on time, with quality work, and under budget. KHI goals: Complete the job in a safe manner. Complete the job with no/minimal re-work.

• Can be trusted to work without supervision.
• Ability to work with clients and develop friendly relationships.
• Sufficient attention-to-detail to make our products/services better than our competition.
• Dedicated to doing things right (for long term) the first time rather than hoping the client doesn't find out about mistakes.
• Understand ethical behavior and business practices, and ensure that own behavior and the behavior of others is consistent with these standards and aligns with the values of the organization.
• Creativity/Innovation: Develop new and unique ways to improve operations of the organization and to create new opportunities.
• Make Decisions: Assess situations to determine the importance, urgency and risks, and make clear decisions which are timely and in the best interests of the organization.

• Install operating room lights, equipment booms, cabinetry, among other structures.
• Pull, install, cable (CAT 5/6), medical gas lines, and other cabling.
• Provide reports for clients, validating test results and work performed.
• Learn client specific systems, enabling client growth and full integration.
• Install and mount video monitors.
• Proficient in cable management.
• Basic general contracting skills.

• Ability to travel overnight 80% or more of the time.
• Knowledge of electrical, and low voltage systems.
• Ability to read plans and follow the scope of work, installing all equipment to specifications.
• Ability to assess changes in the scope of work and appropriately request a change order.
• Need to be able to use a level, wrench, reciprocating saw, portable hand saw, or hammer drill to install equipment.
• Installation Technicians work a standard work week but may be required to work evenings and weekends to meet project milestones. (Nationwide)
• Ability to work in a crouched or kneeling position and in confined spaces.
• Preferred certifications, such as OSHA 10.
• Ability to lift 70+ pounds.

• Stays on task throughout the day without supervision.
• Moves onto subsequent tasks with good communication and little/no supervision.

• Listens well and adheres to PM direction.
• Speaks up to ensure proper understanding.
• Strong verbal and written communication skills, with the ability to communicate with clients and situations in a professional, proactive and productive manner.
• Communicate Effectively: Speak, listen and write in a clear, thorough and timely manner using appropriate and effective communication tools and techniques.

• Able to prioritize while solving problems:
  • Client & KHI goals
  • Trust, work with clients, Attention to detail, doing things correctly.
  • Assess problem situations to identify causes, gather and process relevant information, generate possible solutions, and make recommendations and/or resolve the problem.

• Able to work with KHI PM's and leadership professionally.
• Able to work with clients in professional and friendly manner.
• Able to relate to facility workers and patients with respect.

• Organize their personal habits to be ready to work on-time, every time.

• Handle their personal issues to not interfere with normal working hours.
• Be prepared prior to work to complete jobs with no rework and minimal non-productive time.
• Complete jobs in proper sequence.

• Adheres to OSHA and KHI standards without fail.
• Willing to help others adhere to OSHA and KHI standards.
• Stops jobs before they become unsafe rather than waiting until the last second.

• $18 $23 per hour Starting, based on experience.
• Benefits include Medical and 401K retirement plan.

Requisition ID # 169729 

Job Category: Maintenance / Construction / Operations 

Job Level: Individual Contributor

Business Unit: Electric Operations

Work Type: Onsite

Job Location: Oakland

Department Overview

The workers of Electric Operations ensure the delivery of safe and reliable electric service to our customers. Electric Operations is responsible for every aspect of PG&E's electric distribution and transmission operations, including planning, engineering, maintenance and construction, asset management, business planning, restoration and emergency response.

Position Summary

This classification is represented by IBEW Local 1245, which has over 100 years of experience representing employees at PG&E. This job is subject to collective bargaining.

A coworker who has the qualifications of a Cable Splicer, is familiar with the underground system and has the experience and ability to analyze cable and equipment troubles quickly and to restore services promptly by replacing fuses, switching, disconnecting defective cables or apparatus, making repairs, etcetera. May be required to perform other underground work such us preparing cable racks, pulling in and racking cables, maintaining equipment in the underground system, etc. Shall install and maintain services, meters, and equipment including conduit and wiring up to the meter on customers' premises and shall handle trouble in such installations. Drives a truck and operates the associated equipment as assigned. Background of apprenticeship and experience must be such as to qualify an employee to perform these duties with skill and efficiency. Shall be familiar with Company's standards, procedures and safety regulations. 

This position may be subject to Joint Apprentice Training Committee (JATC) review and approval. Provisional hires will be required to participate in targeted training to achieve journey-level knowledge of electrical technician roles and responsibilities.

This position is in the Bay Area region, and headquarters in Oakland subject to change based on business needs.

This position is a DOT (Department of Transportation) covered classification and is subject to random drug and/or alcohol screening.

PG&E is providing the hourly rate that the company in good faith believes it might pay for this position at the time of the job posting. This position is subject to collectively bargained hourly wage rates and increases. The starting wage rate for this position is $67.58 per hour. This wage rate is specific to the locality of the job. The wage rate is based on multiple factors, including, but not limited to, specific skills, education, licenses or certifications, experience, market value, geographic location, collective bargaining agreements, and internal equity.

Job Responsibilities

• Perform all necessary duties with skill and efficiency by performing maintenance on underground transmission and distribution lines.
• Perform work in connection with the construction and maintenance of underground manholes, vaults, splice boxes, duct lines and similar structures.
• Installs and maintains services, meters, and equipment including conduit and wiring up to the meter on customers' premises
• Maintains equipment in the underground system
• Prepares cable racks
• Pulls and racks underground cables and wires into and out of pipes, conduits and duct lines.
• Splices cables of any kind or voltage for the connection of cable, transformers, junction boxes, and other equipment in the underground or overhead systems or stations.
• Ensure effective customer and internal communication.
• Restore service to the public by installing / repairing services and all types of meters.
• Analyze cable and equipment trouble quickly and restore services promptly by replacing fuses, switching, disconnecting defective cable on apparatus efficiently.
• Identify the location of and extent to which underground structures such as man holes and vaults have been damaged and perform minor repairs safely on underground enclosures.
• Isolate Network grid secondary’s and Network Protectors (NP’s).
• Install and remove Recording Volt Meters (RVM’s) for power quality research.
• Physically demanding work that may include lifting, climbing, as well as going into confined spaces.
• Drive trucks, vans, and equipment and operate the associated equipment as assigned.
• May work with crew or independently. May oversee a crew and its equipment engaged in pulling underground cables and wires of all sizes, types, lengths and number of conductors into and out of pipes, conduits and duct lines and other necessary work in conjunction with pulling of cables.
• Support and maintain a working relationship with other departments which include, Distribution Operators, Service Op drive erectors, Engineering, Estimating and Construction to improve processes and ensure a high level of customer service.
• Working knowledge of applicable safety rules, programs and safe work practices.
• Expected to learn and follow safety and work procedures.
• Working knowledge of available mobile technical software.

Qualifications

Minimum:

• CA CDL Class A Permit, or equivalent, subject to 150% driver/vehicle ratio
• Knowledge of procurement strategies and processes and relevant regulatory framework as needed to perform at the job level
• Must be at least 18 years of age
• Must possess a High School diploma or GED
• Completion of formal union sanctioned Cable Splicer apprenticeship
• Must possess an IBEW journey- level card for a Cable Splicer or State or JATC certification
• Must be able to lift 90 lbs
• Able to wear company provided Personal Protective Equipment (PPE)
• Able to work and drive in all types of weather and road conditions
• Able to work extended hours, nights, weekends and holidays
• Able to travel to job sites as necessary
• Ability to work shift schedule (evening)
• Ability to complete and obtain a 40 hour Switchman Training Certification/Card
• Must pass Post-Offer Physical Assessment as a requirement of the pre-employment process
• If hired as Provisional, must pass the provisional training plan within one year from hire date
• Must qualify on Cable Splicer Assessment 
  • Internal PG&E Employees:
    • Must possess and maintain a valid Class C California Driver's License (or higher) by Day 1 of hire
    • Must possess and maintain a valid Class A California Driver's License Permit by within 3 months of hire
  • External:
    • Must possess and maintain a valid Class A California Driver's License Permit by Day 1 of hire
    • Must possess and maintain a valid DMV Medical Card by Day 1 of hire

Desired:

• Live within 30 minutes of headquarters due to emergency and urgent requests
• Experience as a cable splicer with familiarity of underground and network systems (lead training)
• Minimum of two years of experience as a Journey Cable Splicer
• Relevant PG&E/Hiring Hall experience
• Ability to install transition splices, clear cap, straight splices, terminations and other various splices
• Ability to properly ground conductor cable and equipment
• Ability to install switches, transformers and banking transformers
• Ability to build risers
• Ability to tag and identify underground cable and equipment
• Ability to operate load break and dead break equipment
• Ability to phase lines and equipment
• Ability to make and trace service connections
• Ability to build to PG&E & G.O. 128 standards
• Qualified to work on primary and secondary voltages
• Ability to work on lead splices such as hot solder wipes
• Ability to work on network systems and its equipment

Pre-Employment Testing

PG&E Employees: You must have qualified on all prerequisite tests prior to submitting an application, and all secondary tests prior to interviewing. For more information on prerequisite and secondary exams, including study guides, please visit the  Pre-employment testing program website.

• Physical Test Battery
• Post-Offer Physical Assessment Apprentice Cable Splicer
• Work Orientation Inventory-Physical/Technical Driving
• Cable Splicer Assessment

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

How You'll Contribute:

The AV Installation and Support Services Technician is responsible for the installation, termination, testing, troubleshooting, and maintenance of low-voltage cabling systems, including voice, data, and video.

Assigned to Client and works full time from onsite location responsible for Installation and then maintaining the system after installation. Will conduct Preventive Maintenance and will assist with Service Tickets as needed. Will work with REMOTE support to troubleshoot Service Tickets as required.

This role ensures all work complies with industry standards and client requirements, with a focus on quality, safety, and efficiency. Technician will work onsite and will be responsible for preventive maintenance of the systems and will work with remote service technicians to address service tickets as needed.

What You'll Do:

• 
  
  
• Install, terminate, and test copper and fiber optic cabling for voice, data, and video systems.
  
  
• Interpret blueprints, floor plans, and wiring diagrams to determine cabling requirements and optimal routing.
  
  
• Perform troubleshooting and repairs on structured cabling systems and related hardware.
  
  
• Ensure all installations comply with relevant standards.
  
  
• Document all work performed, including test results and as-built drawings using BlueBeam.
  
  
• Collaborate with project managers, engineers, and other trades to ensure successful project completion.
  
  
• Maintain tools, equipment, and a safe, organized work environment.
  
  
• Provide technical support and guidance as needed.
  
  
• Participate in ongoing training to stay current with industry best practices and standards.
  
  
• Oversee all on-site activity on the active project job site and address any issues necessary to achieve quality and timeline standards
  
  
• Oversee all field operations and report progress, status and issues.
  
  
• Supervises the physical installation of a wide variety of technology into a wide variety of locations
  
  
• Maintains all quality control on jobsite, checking all work from subcontractors and union trades. Managing any discrepancies in our standards
  
  
• Able to read and understand functional design drawings and cable riser diagrams
  
  
• Able to complete assignments in accordance with or better than established task durations as well as estimate task durations to meet assigned deadlines. Provides daily feedback to Manager
  
  
• Able to build and wire custom panels from engineering drawings
  
  
• Advanced Fiber optic cable handling, installation termination and testing
  
  
• Responsible for tracking and maintaining toolkits, job material boxes, company vehicles and materials inventories. Keep clean, orderly and well documented
  
  
• Responsible for tracking and maintaining their personal licenses, certifications and qualifications. (Some states have specific requirements in this area)
  
  
• Maintain daily record of time worked on specific projects for timesheet entry. Maintain an activity log and a personnel log for skills to report on recommended improvements.
  
  
• Conduct routine Preventative Maintenance and logs as required.
  
  
• Work with Remote support for service tickets that require escalation.
  
  

Complexity:

This level of technician will be responsible for performing tasks on clients' jobsites with no supervision. This position is responsible for the coordination with clients, contractors and subcontractors. This position will be the key and only field technician in many situations and will be responsible for delegating work, working with remote support, and communicating with key stakeholders on behalf of the company. Requires maintaining quality control on all field work. This position requires the highest level of technical and people skills along with great communication skills.

Decision Making Authority:

This position is often alone on the job sites and requires making good judgement about decisions that need to be made. In general, the service manager, project manager and supervisor are available to answer questions, but this position is very independent and will be looked upon to make many onsite decisions on behalf of the service manager and company. This position requires good diplomacy in working with our clients and other key stakeholders on the job sites.

Physical Working Environment:

• 
  
  
• Work is performed in commercial, industrial, and construction environments.
  
  
• May require working in confined spaces, on ladders, lifts, or at heights.
  
  
• Must be able to lift and carry up to 50 lbs.
  
  
• Exposure to varying weather conditions and construction site hazards.
  
  

Physical Demands:

The physical demands described here are representative of those that may be met by an employee. The employee may be exposed to construction site conditions on a regular basis.

Employee will be responsible for their safety while on job sites and comply with all safety regulations in place by the client and Diversified. Use of PPE could be required on job sites. The employee can typically spend at least 60% of their time on their feet and be required to be mobile around the client site. The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 50 pounds in construction areas.

The individual is regularly required to use keyboards, test equipment and controls required for installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc.

Travel:

Travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee must possess a valid Passport for entry onto client site. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Occasional travel by airplane for out-of-town projects is required.

Safety:

Maintain and wear appropriate PPE as the job and tasks require it.

Ensure hazards are addressed and rectified in a timely manner.

What You'll Bring:

Education & Certifications:

• 
  
  
• High school diploma or equivalent required.
  
  

• 
  
  
• Must possess the E06 Limited Energy Systems License
  
  

• 
  
  
• OSHA 30 Certificate required
  
  
• Must have a valid US Passport.
  
  
• Must have a valid driver's license and adhere to our insurance requirements
  
  

Required Skills/Qualifications:

• 
  
  
• Minimum 2 years of experience in low-voltage or structured cabling installation.
  
  
• Possess advanced AV installation skills
  
  
• Familiarity with a wide range of audio, video and networking equipment
  
  
• Proficient in the use of cable testers, hand tools, and power tools.
  
  
• Ability to read and interpret technical documents and blueprints.
  
  
• Must have knowledge of the following programs: Teams, Outlook, Excel, OneNote, BlueBeam/Adobe Reader
  
  
• Willingness to travel to job sites as required.
  
  
• Excellent troubleshooting and problem-solving skills.
  
  
• Strong communication and teamwork abilities.
  
  
• Good verbal communication skills and good customer service skills
  
  
• Ability to diagnose, troubleshoot and resolve technical problems
  
  
• Able to work indoors/outdoors, standing, sitting and ladder use. Able to lift 50lbs.
  
  

Preferred Skills/Qualifications:

• 
  
  
• Experience with Service Now preferred.
  
  
• Experience with Software House preferred.
  
  

• 
  
  
• AVIXA CTS Certification is preferred.
  
  

• 
  
  
• AVIXA CTS-I Certification is highly encouraged
  
  

• 
  
  
• Installer (Level 1 or 2), Technician, or equivalent structured cabling certification preferred.
  
  
• Additional certifications from recognized structured cabling governing bodies are a plus.
  
  

Other relevant certifications may be required or preferred based on the technology focus of the position

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

How You'll Contribute:

The installation technician is responsible for performing a wide variety of installation duties on technology projects for our clients. This position is the key field position for the bulk of the actual work that gets done in our clients buildings. The install tech needs to coordinate with project management, field superintendents and others to fully understand their role on specific projects. They interpret our drawing packages to create the basis of the finished systems. This installation can include displays, projectors, loudspeakers, microphones, equipment racks, etc. Will also provide advice and guidance to Associate Installation Technicians as necessary.

Location: Must live in the Washington DC - VA area.

What You'll Do:

• 
  
  
• Perform structured cabling installation: pull, terminate, label, and dress cables per project documentation and standards.
  
  
• Complete physical installation and wiring of AV devices (displays, speakers, microphones, cameras, control interfaces, etc.).
  
  
• Assemble, populate, and dress equipment racks with a high degree of workmanship and adherence to design documents.
  
  
• Solder and terminate connectors according to project specifications and accepted industry practices.
  
  
• Execute light physical construction tasks as required (e.g., blocking, mounting surfaces, hardware installation).
  
  
• Follow Diversified's installation procedures, quality guidelines, and safety protocols with minimal deviation.
  
  
• Maintain accurate daily records: timesheets, daily field reports, checklists, and as-built documentation.
  
  
• Collaborate effectively with Project Managers, Engineers, and Lead Technicians to ensure project milestones are met.
  
  
• Represent Diversified professionally on active job sites, including client and construction environments.
  
  
• Actively participate in ongoing training and skill development toward advancing technical proficiency.
  
  

Complexity:

This level of technician will be responsible for performing tasks on clients job sites with little supervision. On smaller projects this position may be responsible for the coordination with clients, contractors and subcontractors.

Decision Making Authority:

This position is often alone on the job sites and requires making good judgement about decisions that need to be made. In general the project manager and a site supervisor are available to answer questions. This position requires good diplomacy in working with our clients and other key stakeholders on the job sites.

Physical Working Environment:

Physical Demands:

The physical demands described here are representative of those that may be met by an employee. The employee may be exposed to construction site conditions on a regular basis. Employee will be responsible for their safety while on job sites and to comply with all safety regulations in place by the GC. Use of PPE is usually required on job sites. The employee can typically spend at least 60% of their time on their feet and be required to mobile around the construction site. The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 40 pounds in construction areas. The individual is regularly required to use keyboards, test equipment and controls required for SI installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc.

Travel:

Frequent travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2 hour driving distance each way) will make up 70-90% usually but remote travel can be up to 30% of the job at times. 10% remote travel is required on a regular basis.

What You'll Bring:

Education/ Certifications:

* High school or GED equal
* AVIXA CTS Certification is desired.
* Must have a valid drivers license and adhere to our insurance requirements
* OSHA 30 Certificate is highly desired. (NYC OSHA30 is desired)
* Other relevant certifications may be required or preferred based on the technology focus of the position.

Required Skills/Qualifications:

• 
  
  
• 1+ years as an associate technician and/or fabrication technician or related industry experience.
  
  
• Proven ability to perform core AV installation tasks with minimal direct instruction.
  
  
• Competency with hand tools, power tools, and installation materials required for AV integration.
  
  
• Strong understanding of cabling types, termination techniques, and device mounting requirements.
  
  
• Ability to interpret functional design drawings, cable riser diagrams, and architectural drawings.
  
  
• Comfortable working on ladders, lifts, and in construction environments.
  
  
• Strong work ethic, attention to detail, and commitment to quality workmanship.
  
  
• Effective communication skills and ability to collaborate within a project team.
  
  
• Flexibility and adaptability to evolving site conditions and project priorities.
  
  

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

Job Summary:

The installation technician is responsible for performing a wide variety of installation duties on technology projects for our clients. This position is the key field position for the bulk of the actual work that gets done in our clients buildings. The install tech needs to coordinate with project management, field superintendents and others to fully understand their role on specific projects. They interpret our drawing packages to create the basis of the finished systems. This installation can include displays, projectors, loudspeakers, microphones, equipment racks, etc. Will also provide advice and guidance to Associate Installation Technicians as necessary.

Primary Duties and Responsibilities:

• 
  
  
• Possess all skills from Associate Install Technician and most skills from the Associate Fabrication Technician job descriptions to install components and make modifications on site as necessary to complete the project
  
  
• Physical installation of a wide variety of technology into a wide variety of locations.
  
  
• Execute a wide variety of cabling terminations for all wire and connector types and ability to test completed terminations.
  
  
• Support the preparation of equipment racks for staging of equipment wire lacing including installation of power strips, grounding bars, jack-fields, etc.
  
  
• Able to read and understand functional design drawings as well as cable riser diagrams and all architectural drawings.
  
  
• Able to assist in the mounting of base build equipment such as monitor mounts, ceiling speakers' microphones and projectors.
  
  
• Provide a consistent level of technical performance as well as flexibility in work schedule. This position requires periodic overtime and may require regular overtime for extended periods to meet fabrication deadlines
  
  
• Able to complete assignments in accordance with or better than established task durations as well as estimate task durations to meet assigned deadlines. Provides daily feedback to Project Manager, or Site Superintendent.
  
  
• Able to build and wire custom designs from engineering drawings.
  
  
• Fiber optic cable handling, installation termination and testing.
  
  
• Can print and make minor corrections to cable labels.
  
  
• Maintain an organized work environment specifically orderliness and cleanliness of the shop and jobsites.
  
  
• Responsible for maintaining their toolkit, company vehicles and installation materials inventories. Keeping things clean, orderly and well documented.
  
  
• Responsible for maintaining their personal licenses, certifications and qualifications. (some states have specific requirement in this area)
  
  
• Maintain daily record of time worked on specific projects for timesheet entry and work performed reports
  
  

Complexity:

This level of technician will be responsible for performing tasks on clients job sites with little supervision. On smaller projects this position may be responsible for the coordination with clients, contractors and subcontractors.

Decision Making Authority:

This position is often alone on the job sites and requires making good judgement about decisions that need to be made. In general the project manager and a site supervisor are available to answer questions. This position requires good diplomacy in working with our clients and other key stakeholders on the job sites.

Physical Working Environment:

Physical Demands:

The physical demands described here are representative of those that may be met by an employee. The employee may be exposed to construction site conditions on a regular basis. Employee will be responsible for their safety while on job sites and to comply with all safety regulations in place by the GC. Use of PPE is usually required on job sites. The employee can typically spend at least 60% of their time on their feet and be required to mobile around the construction site. The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 40 pounds in construction areas. The individual is regularly required to use keyboards, test equipment and controls required for SI installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc.

Travel:

Frequent travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2 hour driving distance each way) will make up 70-90% usually but remote travel can be up to 30% of the job at times. 10% remote travel is required on a regular basis.

Job Qualifications:

Education/Certifications:

• 
  
  
• High school or GED equal
  
  
• AVIXA CTS Certification is desired.
  
  
• One or more years as an associate technician and/or fabrication technician or related industry experience.
  
  
• Must have a valid drivers license and adhere to our insurance requirements
  
  
• OSHA 30 Certificate is highly desired.
  
  
• Other relevant certifications may be required or preferred based on the technology focus of the position.
  
  
• Required/Desired Knowledge, Experience and Skills:
  
  
• Familiarity with a wide range of audio, video and networking equipment
  
  
• Knowledgeable of low voltage electrical concepts
  
  
• Possess basic carpentry and/or installation skills
  
  
• Proficient use and safety with power tools
  
  
• Good verbal communication skills and good customer service skills.
  
  
• Ability to diagnose, troubleshoot and resolve technical problems
  
  

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.