How Does Remote Control Work Jobs in Usa

• 
  
• Prevent and control corrosion in hull, topside, interior, and deck surface coating systems with Navy ships.
  
• Application the regulations of the Clean Air Act, NESHAP, EPA, OSHA, ASTM 718F, and the Material Data Safety Sheet with regard to VOC compliance.
  
• Conduct surveys of underwater hull, topside, interior, and decks to determine the effectiveness of specific corrosion control systems such as attendance at Surface Ship Availabilities.
  

• 
  
• US Citizenship.
  
• Ability to obtain and maintain Base Access and an Active Secret
  
• Graduate of high school, trade school, industrial school, or correspondence school in which credits were received in algebra, plane geometry, trigonometry, and physics.
  
• Five (5) years of experience in the prevention and control of corrosion and in hull, topside, interior, and deck surface coating systems with Navy ships.
  
• Five (5) years of experience with the application of the regulations of the Clean Air Act, NESHAP, EPA, OSHA, ASTM 718F, and the Material Data Safety Sheet with regard to VOC compliance.
  
• Familiar with corrosion control policy guidance and technical support at the Program level for NAVSEA organization, for example, in support of PEO SHIPS PMS 400D with regards to AEGIS Class (DDG-51 and CG-47) Ships.
  
• Five (5) years experience Conducting surveys of underwater hull, topside, interior, and decks to determine the effectiveness of specific corrosion control systems such as attendance at Surface Ship Availabilities.
  
• Experience reviewing and providing technical guidance on specifications being repaired for corrosion control systems to be installed on surface ships, ship construction, maintenance, and repair.
  
• Experience providing technical guidance concerning the techniques involved in the inspection of preparation and application of corrosion protection systems.
  
• Minimum Requirement: Must be certified by National Association of Corrosion Engineers. Must provide documentation at time of award.
  

Job description:

Job Title: Quality System Technologist – Control Valve / Instrumentation

Location: Plaquemine, LA (onsite)

Pay Rate - $50/hour on W2 - $53/hour on W2

Duration - 3 months

Start Date - 5/25/2025.

Job Overview:

We are seeking a Quality System Technologist to provide quality oversight for control valve and instrumentation repairs at offsite repair facilities during a turnaround. This role is responsible for traveling to vendor repair shops to verify that valve repairs meet required standards and inspection checkpoints. The position will focus on ensuring that repair work is completed in accordance with quality requirements and industry standards.

Key Responsibilities:

• Travel to offsite valve repair shops supporting turnaround activities
• Verify that control valve and instrumentation repairs meet required quality standards
• Check inspection hold points during valve disassembly, repair, and reassembly
• Review repair documentation and inspection reports from repair vendors
• Ensure repair work complies with project and company quality requirements
• Communicate findings and updates to project or turnaround teams

Required Qualifications:

• Strong background in control valve repair or instrumentation maintenance
• Solid understanding of valve function, repair processes, and inspection checkpoints
• Experience with valve inspection, rebuild, and testing
• Familiarity with actuators, positioners, and control valve components
• Ability to travel to offsite vendor repair facilities

Preferred Experience:

• Experience supporting chemical plants, refineries, or industrial facilities
• Previous experience in QC/QA inspection of valve repairs
• Familiarity with valve brands such as Emerson (Fisher valves), Flowserve, or Baker Hughes (Masoneilan valves)

Additional Information:

• Location: Plaquemine, LA
• Travel: Required to offsite repair shops
• TWIC Card: Not required at initial stage.

Keywords:

Control Valve Repair, Instrumentation Technician, Valve Technician, Valve Inspection, Valve Rebuild, Actuators, Positioners, Valve Testing, Valve QA/QC

OpTech/G-Tech is an Equal Opportunity Employer (EOE), all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran

Kelly® Science & Clinical is seeking a Document Control & Training Manager for a Direct Hire position at a leading specialty pharmaceutical company in Sacramento, CA. If you’re passionate about bringing the latest scientific discoveries to life and are ready to take the next step in your career, trust The Experts at Hiring Experts.

Salary:

$80-90k

Overview:

In this role, you will lead and mentor teams to manage document control and GMP training programs, ensuring regulatory compliance and inspection readiness, driving digital transformation, supporting cross-functional collaboration, and fostering a culture of continuous improvement and operational excellence within a fast-growing pharmaceutical and biotech organization.

Schedule:

Monday-Friday, standard working hours

Responsibilities:

• Lead and Develop Teams: Direct, mentor, and inspire the Document Control and GMP Training teams, fostering growth, accountability, and continuous improvement.
• Set Strategic Direction: Establish KPIs, objectives, and overall strategy for document control and training in alignment with organizational quality goals.
• Champion Regulatory Compliance: Ensure robust document management and training programs meet global regulatory requirements (21 CFR 210/211, EU GMP) and maintain inspection readiness.
• Oversee Document Lifecycle: Supervise the creation, organization, revision, archival, and retrieval of critical documents such as SOPs, Master Batch Records, and logbooks for multi-product/multi-site operations.
• Manage GMP Training Programs: Oversee employee training curricula, ensuring all staff are qualified, compliant, and prepared for evolving processes or regulatory changes.
• Drive Process Improvement: Proactively identify workflow bottlenecks, elevate document control best practices, and implement scalable solutions across the organization.
• Lead Digital Transformation: Act as the Business System Owner for electronic document and training management systems, overseeing system configuration, validation, and integrity per regulatory standards (21 CFR Part 11).
• Support Audits and Inspections: Represent quality systems during FDA/EMA audits, regulatory inspections, and customer visits, and deliver improvement strategies to leadership.
• Collaborate Cross-Functionally: Work closely with QA, Manufacturing, Regulatory, IT, and Engineering teams to drive seamless quality operations and support remediation efforts as needed.
• Uphold Culture and Standards: Set clear policies and productivity benchmarks, promote ethical practices, and cultivate a strong culture of operational excellence and compliance company wide.

Qualifications:

• Bachelor’s degree in Science, Engineering, or related field, Master’s degree strongly preferred.
• 8+ years of QA experience in a GMP-regulated environment.
• 3+ years of people management experience.
• Extensive knowledge of cGMP (21 CFR 210/211), EU GMP, GDP, 21 CFR Part 11, and ALCOA data integrity principles.
• Demonstrated expertise as a Business System Owner for digital Document Control/Training systems.
• Proven experience supporting successful regulatory inspections and customer audits.
• Superior project management, change leadership, and communication skills.

Access Control Coordinator

Pay: $87,068.80

Location: On-site in Santa Clara, CA

About BCI: Blackstone Consulting, Inc. (BCI) is a minority-owned, 9,000 employee, global service provider overseeing account services in food, environmental, facility maintenance, professional staffing, and security. Within our healthcare security division, we help healthcare organizations achieve superior programs and results. This includes our investment in you and your ability to deliver best practices to our client while receiving exceptional training to advance your healthcare career with BCI. Together, we are building a best-in-class healthcare security operation and are looking for top talent to join us in this effort. We are an equal-opportunity employer committed to a diverse workforce. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status

About the Position: The Access Control Coordinator (ACC) supports local security operations by managing essential administrative and system support tasks that were historically performed by the Security Operations Center (SOC) but will not be managed by the Enterprise Security Operations Center (ESOC). The role ensures continuity of key functions--such as badge processing, video audits, and security system checks--while enabling the SOC to focus on enterprise monitoring and threat-management responsibilities.

Essential Job Duties:

Badge & Access Administration

• Issue, update, deactivate, and audit badges
• Maintain access records and assist with permissions management
• Support contractor/visitor badge workflows

Video System Support

• Perform routine video system and camera health checks
• Support audit activities and footage retrieval for authorized requests
• Document and report system issues

Security System Monitoring Support

• Conduct checks on access control panels, security devices, and system dashboards
• Coordinate with IT, facilities, or vendors for issue resolution
• Maintain system health documentation

Non-Essential Job Duties:

Administrative Security Support

• Manage compliance documentation, logs, and audit files
• Assist with site assessments and follow-up tasks
• Provide administrative support to daily security operations

ESOC Transition & Workflow Alignment

• Serve as the local liaison for tasks no longer managed by the ESOC
• Support communication between local operations, leadership, and the ESOC
• Assist with new workflows, system updates, and policy alignment

Requirements

Qualifications:

• High school diploma or equivalent, plus relevant experience in security operations, facilities support, or administrative/technical support functions.
• Information Security, Facilities Management, Business Administration, or a related field
• 1-2 years of experience in security operations, access control workflows, corporate facilities support, or an equivalent administrative or technical support function.
• This may include experience with badge issuance, visitor management, basic system checks, or facilities/security coordination. Industry recognized security or administrative training (e.g., IAHSS, ASIS coursework, or equivalent).
• Familiarity with access control, video surveillance, or security operations concepts through on the job experience or formal training.
• Working knowledge of access control systems, badge workflows, and visitor management processes.
• Familiarity with video surveillance systems, including basic camera health monitoring and footage retrieval.
• Understanding of security system monitoring concepts and coordination with IT, Facilities, and vendor partners.
• Strong organizational, documentation, and process management skills, with the ability to maintain accurate logs, records, and compliance files.
• Ability to interpret and follow security policies, procedures, and data handling requirements (e.g., privacy, retention, audit standards).
• Effective cross functional communication, including escalation, issue tracking, and follow through with multiple stakeholders.
• Detail oriented approach with strong problem solving skills and the ability to manage competing priorities.
• Comfortable working within ticketing, workflow, or case management systems (e.g., ServiceNow).

• 
  
• Development and adherence to quality control and manufacturing procedures as required to maintain ISO 9001 and AS9100 conformance.
  
• Maintain and report product conformance to engineering and customer specifications through inspection of raw material, work in process and finished goods inventories.
  
• Review the production process for conformance to quality standards and report quality statistics.
  
• Establish and present regular training for inspection and manufacturing employees on quality standards and issues.
  
• Develop programs to encourage each employee to perform quality control as a part of their operation.
  
• Maintain test equipment, including a calibration schedule and any documentation required by AS9100
  
• Perform internal hand tool calibrations
  
• Inspecting and testing raw material, work in process and finished goods parts as needed.
  
• Evaluate RMAs, report findings, and provide corrective actions/process improvements.
  
• Coordinate with purchasing to initiate and process DMRs.
  

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.The Boeing Company is looking for Principal Guidance Navigation and Control Engineer to support the Flight Controls team in Everett, Washington .Position Overview:We are seeking accomplished, self-motivated engineers to design, analyze, test, and certify flight control systems and components for large commercial aircraft. In addition to supporting production and fleet operations, you will be part of a team driving the development of new derivative airplanes and preparing for the next generation of more capable, efficient, and safer airliners.We foster a collaborative environment where every team member prioritizes safety and recognizes the profound significance of their contributions to the aviation industry. Our strong emphasis on teamwork and a robust safety culture is not just a value; it is essential to our mission. By cultivating a culture that values collaboration and safety, we ensure that our commitment to excellence resonates throughout our organization, ultimately enhancing the trust and confidence placed in us by those who fly. If you are passionate about making a difference and thrive in a dynamic environment where your contributions are recognized, we invite you to apply today and join our team!Position Responsibilities:Resolve airplane level requirements into system level requirements and resolve system level requirements into component requirements with time and cost efficient validation methods.Develop and evaluate system and subsystem architecture alternatives to meet project objectives and requirements.Conduct trade studies to analyze and compare alternatives, rapidly converging on preferred configurations through system simulations and development test programs.Lead and participate in system, component, and detailed design efforts, ensuring thorough documentation and adherence to schedule and cost constraints to produce error-free, manufacturable specifications and drawings.Lead and support system- and component-level validation activities, including test plan development, consultation on iron bird and test rig setups, test monitoring, analysis, report authoring, supplier test report review and approval, failure analysis, and mitigation strategies.Drive certification efforts by creating required artifacts such as system safety analyses, failure modes and effects analyses (FMEA), and fault tree analyses (FTA); ensure traceability to regulatory requirements and resolve any regulatory conflicts.Support ongoing production by promptly addressing build issues at Boeing and supplier facilities, identifying and implementing design improvements to enhance build accuracy, production rate, and line safety, and resolving rejections, functional test failures, and flight squawks.Provide subject matter expertise to support global fleet operations, responding to airline and regulator inquiries, leading resolution of Service Related Problems (SRPs), and analyzing flight incidents to inform Safety Review Board (SRB) recommendations for the Continued Operational Safety Program (COSP).

Collaborate effectively across functions and organizations within and outside Boeing, including manufacturing, avionics, crew operations, airplane safety, aerodynamics, supply chain management, BCA systems software, suppliers, airline customers, and regulatory agencies.Work Authorization:This position is expected to be 100% onsite. The selected candidate will be required to work onsite at Everett, WA.Basic Qualifications (Required Skills/Experience): Bachelor of Science degree from an accredited course of study in electrical or computer engineering. 10+ years of experience with Guidance, Navigation, and Control engineering.

Current FAA Commercial Pilot license.Preferred Qualifications (Desired Skills/Experience):Knowledge/Experience with ARP 4754 and ARP 4761.Experience with flight controls system and component architecture.Experience in requirements development, design, analysis, and verification & validation of flight control systems.Experience using requirement management tools such as IBM Rational DOORS.Experience with manufacturing regulated and certified, safety critical components and software.

Experience with Systems Safety Analysis, failure modes and effects analysis; fault tree analysis; common cause analysis, and single & multiple failure analysis.Conflict of Interest:Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union:This is a union-represented position.Pay and Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range:Principal (Level 5): $182,000 - $247,000Additional Information:All information provided will be checked and may be verified.Applications for this position will be accepted until Mar. 19, 2026Export Control Requirements:This position must meet U. S. export control compliance requirements. To meet U. S. export control compliance requirements, a "U. S. Person" as defined by 22 C. F. R. §120.62 is required. "U. S. Person" includes U. S. Citizen, U. S. National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredEducationBachelor's Degree or Equivalent RequiredRelocationThis position offers relocation based on candidate eligibility.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

$95,000 – $130,000 Depending on Experience plus full benefits, annual bonus, 401(k) match 4%, profit sharing, PTO, short- and long-term disability

RemX is seeking a Controls Engineer to design electrical systems, develop PLC/HMI software, and support automated packaging equipment for a global OEM. The ideal candidate will have experience with PLC programming, electrical schematics, panel design, and supporting equipment startup and troubleshooting. This role offers the opportunity to work with advanced automation technology and contribute to high-performance packaging machinery used worldwide.

Note: This position requires 10% travel

• $95,000 – $130,000 DOE plus full benefits, annual bonus, 401(k) match 4%, profit sharing, PTO, short- and long-term disability
• 3+ years of PLC/HMI programming and electrical design experience
• Work with automated equipment used in advanced packaging and processing systems
• Join a global OEM known for innovation, technical depth, and long-term employee development

The Company:

• Over 50+ year-old OEM manufacturing company of high-precision machinery, particularly for the industrial automation and manufacturing industries
• Become part of a team-focused technical group that values collaboration and teamwork
• Excellent Compensation: $95,000 – $130,000 DOE plus full benefits, annual bonus, 401(k) match 4%, profit sharing, PTO, short- and long-term disability

The Position:

• Design and develop PLC, HMI, servo, and motion control programs for automated packaging machinery (Rockwell, Siemens, B&R)
• Create and update electrical schematics, control panel layouts, and power distribution designs using AutoCAD Electrical
• Support equipment startup, debugging, and commissioning at the facility and occasionally at customer sites
• Provide troubleshooting support to assembly teams and field service technicians for electrical and software-related issues
• Develop system upgrades, enhancements, and solutions for field-reported issues
• Collaborate with engineering and project management to support project schedules and machine build timelines
• Ensure all designs follow applicable regulations including NEC, NFPA 70, and cGMP
• Participate in training, trade shows, and technical events to stay current with industry trends and competitive technologies

The Details:

• 3+ years of experience in automation, controls engineering, or machinery manufacturing
• Hands-on experience with PLCs, HMIs, and motion control systems (Rockwell, Siemens, B&R)

Kelly is hiring for a Specialist - Quality Control for a 12-month contract role at Chesterfield, MO 63017 with our prestigious client.

Job Title: Specialist - Quality Control/ Quality Coordinator

Primary Location: 16401 Swingley Ridge Rd Ste 700, Chesterfield, MO 63017

12-month contract - Onsite role

Shift: 8:00 AM to 4:30 PM

Pay rate: $30-38.50/hr.

Summary: The Laird Chesterfield site is seeking a Quality Coordinator. Laird designs, develops and delivers industry leading solutions that protect electronics to enhance the performance and reliability for our customers. Our global organization of world-class scientists and engineers provide solutions to our existing and future customers’ complex problems. A successful candidate will lead the Chesterfield location’s Quality Management System requirements as well as key improvement programs, including support for automotive and aerospace manufacturing sites across Laird. This specific location is not a manufacturing site but includes processes and activities such as Sales, Quoting, Customer Service and some Product Design. Other activities related to quality include but are not limited to system implementation, standardization, and automation. The Quality Coordinator will ensure that the organization’s Quality Management System conforms to internal, Quality Standard requirements (ISO 9001 and others), customer requirements, and any applicable regulatory/legal requirements. The role will collaborate with site leadership, business leadership, and Laird Quality Leaders to ensure compliance and drive continual improvement of the Chesterfield QMS. This position will report to the Laird North America Quality Leader.

RESPONSIBILITIES

• Implementation, support, and improvement of the Quality Management System (QMS) for this site.

• Maintain site metrics and communicate with business and quality leaders on site quality performance; review recommend areas for focus and attention

• Support QMS interfaces with other Manufacturing sites; this location is a remote support location for other sites

• Maintain and improve conformance to applicable Quality Standard requirements including ISO 9001, IATF 16949, AS9100 etc.

• Coordination of and participation in QMS audits by 3rd party Certification Bodies (CB); act as liaison between site team and CB

• Coordinate, maintain and improve internal audit program in compliance with Quality Standards and any relevant customer specific requirements

• Coordinate Management Review activities for Chesterfield and support of other manufacturing sites

• Conduct training on QMS procedures as required and maintain associated records

• Improve and maintain documented information control activities, including revision of the Quality Manual, development of document reviews, and control of related records

• Lead Corrective Action activities; monitor completion of assigned investigations and corrective actions; conduct verification of effectiveness

• Lead investigations on internal and 3rd party NCs; improve and maintain employee competence in problem solving

• Coordinate and track continual improvement projects; evaluate effectiveness to customer or business goals/impact

• Analyze data and trends in support of QMS processes and other site activities such as customer service, customer satisfaction, complaints, or quoting

• Support the Document Change Management process for the Chesterfield site

• Additional administrative responsibilities and support for other functions at the site as needed

REQUIREMENTS

• Proficient knowledge of ISO 9001 (minimum), IATF 16949 and AS9100D desirable

• Good communication skills, both written and oral.

• Ability to maintain accuracy and attention to detail.

• Ability to work as an individual contributor or in a team environment.

• Experience performing Internal Audits

• Experience with CAPA systems

EDUCATION / EXPERIENCE

• Bachelor’s degree in a related field (Quality Mgmt., Operations, Manufacturing Mgmt., etc.)

• Minimum 7-10 years’ experience working within and/or managing a QMS certified to ISO 9001:2015 (IATF 169949 desired)

• Lead or Internal Auditor certification for ISO 9001:2015 and/or IATF 16949:2016 (desired)

• Ability to understand relevant industry controls and requirements in support of manufacturing support processes to achieve and maintain compliance with relevant Standards

• Leadership and project management skills to drive improvement projects

• Root Cause/Corrective Action training and experience

• Proficiency in Microsoft Office applications and any other relevant systems for the management of documents, corrective actions, projects, etc.

If you feel this role interests you, feel free to apply or refer someone who would be a good fit.

Sr. Production Control & Material Operations Manager

**Relocation assistance available

About the Role

We are seeking a Sr. Production Control & Material Operations Manager to lead the coordination, movement, and control of materials throughout a high volume manufacturing facility in the Warsaw, IN area. The successful candidate in this role will oversee production scheduling support, inventory management, inbound material flow, internal logistics, and service parts operations.

The ideal candidate is a hands on leader who thrives in fast moving environments, maintains strong process discipline, and ensures that materials consistently support production requirements.

Key Responsibilities

• Manage day to day material operations, including inventory accuracy, kitting, lineside delivery, warehouse coordination, and service parts fulfillment.
• Lead and develop material operations staff, 3PL partners, and service parts team members while promoting accountability and continuous improvement.
• Ensure all material handling and logistics processes follow safety, quality, and compliance standards.
• Partner with production planning and engineering groups to ensure layouts, equipment, and processes support efficient material flow and throughput.
• Provide timely feedback to planning teams regarding material availability, supplier performance, and schedule impacts.
• Work closely with logistics, receiving, and suppliers to resolve shortages, delays, and discrepancies before they affect production.
• Facilitate daily tier meetings and drive prompt issue resolution to support production stability and takt adherence.
• Maintain BOM accuracy, support incoming inspection activities, and oversee incorporation of engineering changes affecting material flow.
• Collaborate with IT and planning teams to uphold ERP/MRP data integrity and ensure reliable communication between warehouse and shop floor systems.
• Monitor and optimize KPIs such as inventory accuracy, dock to stock time, line shortages, cycle counts, and material handling efficiency.
• Lead material flow improvements, strengthen inventory control practices, and support plant wide continuous improvement initiatives.

Qualifications:

• Bachelor’s degree in Supply Chain, Industrial Engineering, Operations Management, or a related field.
• 8+ years of experience in manufacturing, automotive operations, production control, or materials management.
• Strong working knowledge of ERP/MRP systems (SAP, Oracle, FUUZ, or similar) and MES integration.
• Demonstrated leadership experience in fast paced production environments.
• Excellent communication, analytical, and problem solving abilities.
• Experience with lean manufacturing, JIT, Kanban, and process improvement.
• Familiarity with ISO 9001 or comparable quality management systems.

Apply today for immediate consideration. Qualified candidates will be contacted upon resume review.

Zing Recruiting is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, and gender identity), national origin, age, disability, genetic information, or any other protected status under federal, state, or local law. We are committed to fostering a diverse and inclusive workplace

About the Role & Team

Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.

Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.

Are you an OT or ICS engineer who has an interest and aptitude for network design and cyber security?

As a Ride Control Systems Security Engineer you will work within Walt Disney Imagineering’s Ride Studio on multiple ride attraction projects and are responsible for network architecture and cyber security design and implementation activities on new ride projects for installation in all our parks across the globe.  Join us in a highly collaborative and self-directed atmosphere to lead efforts applying leading edge network technology on Disney rides!

You will report to the Ride Controls Systems Engineering Executive

This is a full time role.

What You Will Do:

• Lead Operational Technology (OT)/ Industrial Control Systems (ICS) network architecture and cyber security systems development, design, and implementation for automation and embedded control systems on a wide variety of large-scale, highly complex, and innovative ride systems
• Perform engineering design and analysis for ride system networks, with focus on automation system architecture
• Design and test cyber security solutions and network architectures for ride systems
• Design, model, and analyze data network communication systems
• Research and test new products, technologies, and methodologies and conduct trade-off studies
• Prepare and propose new cyber security and network architecture concepts and standards
• Lead standards and policies development for ride control network and cyber security architectures
• Collaborate with and support project teams on network requirements, implementation, and issues
• Collaborate with attraction development teams to design and deliver ride networks
• Develop and analyze OT network performance requirements for high availability real-time system
• Develop and capture requirements and functional specifications in documents, drawings, and models
• Develop implementation plans and budgets for ride control network systems
• Develop and implement mock-ups and prototypes for proof-of concept efforts
• Develop test requirements and documents and conduct ride network installation/commissioning efforts

Required Qualifications & Skills

• At least 3 years of experience with design, engineering, installation, and commissioning of highly networked automation, process control, and industrial control systems
• At least 3 years of experience in network systems design, installation and configuration
• At least 3 years of experience with Linux and Windows system administration experience
• Demonstrated experience in network design and analysis approaches to ensure and balance network availability, performance, resiliency and security
• Knowledge of wired and short-range wireless communication networks used in high availability industrial and embedded applications
• Solid understanding of communication technologies/protocols: TCP/IP, CAN, Serial, ProfiNET, Ethernet/IP, EtherCAT, 802.11
• Demonstrated experience in wireless communications for control and monitoring high-availability safety critical systems
• Demonstrated experience evaluating and remediating network and system vulnerabilities
• Demonstrated experience with cyber security technologies including firewalls, endpoint security solutions, VPNs, network security monitoring and detection, and security information and event management (SIEM).
• Solid skills in technical document writing
• Ability to travel and work both domestically and internationally, for varying durations that could be up to 3 months
• Ability to handle multiple complex efforts simultaneously, coordinate team efforts, and manage tasks and priorities
• Ability to maintain knowledge of constantly changing network and cyber security concerns in OT/ICS systems

Preferred Qualifications and Skills

• Proficient in Rockwell and/or Siemens automation systems architecture and components
• Experienced in fail-safe and safety-related system design and analysis
• Experience with multitasking software platforms and design approaches
• Experience with wired and wireless network design and configuration
• Experience with firewalls, VPNs, network security monitoring, and vulnerability assessment tools
• Knowledge of software configuration management/version control tools
• Cisco, GIAC, CompTIA or other relevant network and cyber security certifications strongly preferred

Education

• As a minimum a Bachelor of Science Degree in engineering, computer science, or related field from an accredited university required; Electrical Engineering preferred

Additional Information:

• Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at  

#DXmedia

About the Role & Team

Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.

Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.

Are you an OT or ICS engineer who has an interest and aptitude for network design and cyber security?

As a Ride Control Systems Security Engineer you will work within Walt Disney Imagineering’s Ride Studio on multiple ride attraction projects and are responsible for network architecture and cyber security design and implementation activities on new ride projects for installation in all our parks across the globe.  Join us in a highly collaborative and self-directed atmosphere to lead efforts applying leading edge network technology on Disney rides!

You will report to the Ride Controls Systems Engineering Executive

This is a full time role.

What You Will Do:

• Lead Operational Technology (OT)/ Industrial Control Systems (ICS) network architecture and cyber security systems development, design, and implementation for automation and embedded control systems on a wide variety of large-scale, highly complex, and innovative ride systems
• Perform engineering design and analysis for ride system networks, with focus on automation system architecture
• Design and test cyber security solutions and network architectures for ride systems
• Design, model, and analyze data network communication systems
• Research and test new products, technologies, and methodologies and conduct trade-off studies
• Prepare and propose new cyber security and network architecture concepts and standards
• Lead standards and policies development for ride control network and cyber security architectures
• Collaborate with and support project teams on network requirements, implementation, and issues
• Collaborate with attraction development teams to design and deliver ride networks
• Develop and analyze OT network performance requirements for high availability real-time system
• Develop and capture requirements and functional specifications in documents, drawings, and models
• Develop implementation plans and budgets for ride control network systems
• Develop and implement mock-ups and prototypes for proof-of concept efforts
• Develop test requirements and documents and conduct ride network installation/commissioning efforts

Required Qualifications & Skills

• At least 3 years of experience with design, engineering, installation, and commissioning of highly networked automation, process control, and industrial control systems
• At least 3 years of experience in network systems design, installation and configuration
• At least 3 years of experience with Linux and Windows system administration experience
• Demonstrated experience in network design and analysis approaches to ensure and balance network availability, performance, resiliency and security
• Knowledge of wired and short-range wireless communication networks used in high availability industrial and embedded applications
• Solid understanding of communication technologies/protocols: TCP/IP, CAN, Serial, ProfiNET, Ethernet/IP, EtherCAT, 802.11
• Demonstrated experience in wireless communications for control and monitoring high-availability safety critical systems
• Demonstrated experience evaluating and remediating network and system vulnerabilities
• Demonstrated experience with cyber security technologies including firewalls, endpoint security solutions, VPNs, network security monitoring and detection, and security information and event management (SIEM).
• Solid skills in technical document writing
• Ability to travel and work both domestically and internationally, for varying durations that could be up to 3 months
• Ability to handle multiple complex efforts simultaneously, coordinate team efforts, and manage tasks and priorities
• Ability to maintain knowledge of constantly changing network and cyber security concerns in OT/ICS systems

Preferred Qualifications and Skills

• Proficient in Rockwell and/or Siemens automation systems architecture and components
• Experienced in fail-safe and safety-related system design and analysis
• Experience with multitasking software platforms and design approaches
• Experience with wired and wireless network design and configuration
• Experience with firewalls, VPNs, network security monitoring, and vulnerability assessment tools
• Knowledge of software configuration management/version control tools
• Cisco, GIAC, CompTIA or other relevant network and cyber security certifications strongly preferred

Education

• As a minimum a Bachelor of Science Degree in engineering, computer science, or related field from an accredited university required; Electrical Engineering preferred

Additional Information:

• Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at  

#DXmedia

Instrumentation & Controls Technician

Minimum 3 years of hands‑on experience in industrial instrumentation and controls within food, beverage, or process manufacturing.

Are you looking to make a career change to a stable company? This exciting opportunity offers a competitive salary plus an excellent benefits package including medical insurance, dental insurance, vision insurance and paid PTO.Does this position match your future career goals? Then this opportunity could be the right fit for you.

Why should you apply?

• Growth Opportunities
• Great Pay
• Excellent work environment with growth opportunities
• Great Benefits
• Vacation Days

Essential Duties & Responsibilities:

• Install and commission field instrumentation including pressure, level, flow, temperature, conductivity, and pH sensors, as well as control valves, actuators, and hygienic process devices.
• Configure, troubleshoot, and maintain Allen Bradley (Rockwell) PLCs, controllers, and I/O modules; perform logic checks, firmware updates, and backup/restore procedures.
• Start up, program, tune, and maintain VFDs and motor starters for pumps, mixers, conveyors, chillers, and other process equipment; verify parameters and motor protection settings.
• Diagnose electrical, instrumentation, and network issues; isolate faults to field devices, wiring, VFDs, PLCs, or HMIs and implement corrective actions.
• Perform all work in compliance with sanitation, hygiene, and regulatory requirements for food processing environments; support washdowns and contamination‑prevention practices.
• Participate in planned shutdowns, equipment changeovers, and emergency maintenance activities.
• Train operators and production staff on basic instrument checks, safe equipment operation, and troubleshooting awareness.

Required Qualifications & Experience:

• High school diploma or equivalent required; technical certificate, associate degree, or vocational training in instrumentation, electronics, electrical technology, or related field preferred.
• Minimum 3 years of hands‑on experience in industrial instrumentation and controls within food, beverage, or process manufacturing.
• Demonstrated proficiency with Rockwell / Allen Bradley PLCs and controllers, including configuration and troubleshooting.
• Hands‑on experience with VFD installation, parameterization, and basic diagnostics.
• Ability to read and interpret P&IDs, wiring diagrams, loop sheets, and electrical schematics.
• Proficiency with calibration tools such as loop calibrators, multimeters, megohmmeters, and temperature calibration devices.
• Strong troubleshooting ability, mechanical aptitude, and attention to sanitary detail in a food‑processing environment.

Jasleen Kaur

Ajulia Executive Search is a search firm specializing in Manufacturing, Finance, IT, Legal and Pharmaceutical positions. This is a confidential search for one of our preferred clients. It is a direct hire position that includes competitive compensation and full comprehensive benefit package.

#ZR

Weeks Group, LLC is a leading construction firm specializing in the development of advanced data center facilities. With a strong commitment to innovation, quality, and client satisfaction, we deliver cutting-edge solutions that address the dynamic needs of the data center industry. As we continue to expand, we are seeking a skilled and experienced Data Center Construction QAQC Manager to join our dream team. We are not headhunters. We don't just put butts in seats. We are a dream team of experts in the industry to thrive from solving problems and getting things done!

Weeks Group's Values:

We Answer the Call

Integrity- Honesty-Trust- Nimbleness

We Don’t Take No for an Answer

Persistence- Determination- Accountable

We Solve Problems

We Work Hard and Reward Well

Within Challenging, Intense Projects

We Expect the Best from Each Other

Teamwork- Communication

We BTFM

Innovative- Disdain for Mediocrity

If you don't have data center experience or don't align with our values, no need to apply.

Employment Type: Full-time-Traveling position option

Project Type: Hyperscale / Mission Critical Data Centers – Brownfield (live campus / retrofit / expansion)

Reports To: Project Director / Director of Construction Operations

Role Summary

We’re hiring an On-Site QA/QC Manager to lead the quality program on brownfield hyperscale data center construction—where safety, uptime, and precision matter as much as speed. You’ll own electrical QA/QC planning and execution, drive rigorous documentation, and ensure installations meet strict client standards, contract requirements, and code while working in/around live critical environments. This role supports readiness for energization, commissioning, and IST with strong change control and zero-surprise turnover.

What You’ll Do

• Own and maintain the Project Quality Plan (PQP) tailored for brownfield constraints (phasing, outages, access controls, change control).
• Build and manage electrical Inspection & Test Plans (ITPs), checklists, and hold/witness points—by system, room, and phase.
• Lead daily QA/QC field execution and verification against IFC drawings, approved submittals, vendor IOMs, RFIs, and method statements.
• Drive quality for the electrical critical path, including (as applicable):
• MV/LV distribution: switchgear, transformers, breakers, relays, terminations
• UPS/battery systems: installation verification, clearances, labeling, startup readiness
• Generators/paralleling gear: interface readiness, documentation capture, punch closure
• Busway/PDUs/RPPs: supports, alignment, tap boxes, labeling, grounding/bonding
• Cable tray/conduit: routing, supports, firestopping, separation, workmanship standards
• Grounding & bonding: integrity verification and as-built accuracy
• Controls/EPMS/BMS electrical interfaces: device placement, labeling, point-to-point readiness (as assigned)
• Enforce brownfield-specific quality disciplines:
• Verify phasing plans and temporary power installs meet requirements
• Maintain as-built accuracy in real time due to live site impacts and field changes
• Coordinate quality gates tied to shutdown windows, cutovers, and turnover milestones
• Manage deficiency systems: NCRs, punch lists, rework prevention, corrective/preventive action (CAPA), re-inspections, and verified closeout.
• Partner tightly with Operations, Controls, Commissioning, and Safety to ensure quality supports uptime protection and controlled energization.
• Own electrical turnover packages: inspection reports, test results, redlines/as-builts, O&Ms, training logs, vendor startup documentation, commissioning support documentation.
• Provide weekly reporting: trends, repeat issues, risk register inputs, and 2–6 week quality look-ahead tied to phasing and outage schedules.

Qualifications

• 7+ years QA/QC experience on mission critical construction with strong electrical focus; brownfield/live siteexperience strongly preferred.
• Proven success running PQP/ITP programs, NCR/punch systems, and turnover documentation on fast-track or phased retrofits.
• Strong ability to interpret one-lines, schematics, control wiring diagrams, specs, and vendor documentation.
• Working knowledge of NEC/NFPA 70 and typical hyperscale QA requirements (labeling standards, documentation rigor, readiness gates).
• Highly organized, strong communicator, and able to coordinate across multiple trades, vendors, and stakeholders in a controlled environment.

Preferred

• Experience supporting cutovers, shutdown windows, energization planning, commissioning readiness, and IST
• Familiarity with NFPA 70E-related interfaces and verification of torque/labeling/test documentation programs
• Certifications: CQM-C, ASQ (CQA/CQE), OSHA 30
• Tools: Procore, ACC/BIM 360, Bluebeam, PlanGrid

What Success Looks Like

• Zero “surprise” quality issues during shutdown windows and cutovers
• Electrical systems pass startup/commissioning on first attempt
• NCR/punch stays controlled and closes quickly ahead of milestones
• Turnover packages are complete, accurate, and accepted without rework

Benefits

• Competitive compensation + bonus potential
• Health/dental/vision, 401(k), PTO
• Per diem/vehicle allowance (if applicable)
• Growth path within hyperscale mission critical delivery