Hdr Image Test Jobs in Usa

POSITION PURPOSE

Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned  Maintenance (PM) schedules and repairs of general and specialized  clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment.  Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on equipment maintenance in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service or coordinates training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Three or more years of equivalent experience performing corrective and planned  maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, 1st Look Cath Lab, CT etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imaging equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes , including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Pay Range 41.43-62.14

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

POSITION PURPOSE

Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned  Maintenance (PM) schedules and repairs of general and specialized  clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment.  Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on equipment maintenance in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service or coordinates training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Three or more years of equivalent experience performing corrective and planned  maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, 1st Look Cath Lab, CT etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imaging equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes , including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Pay Range 41.43-62.14

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

POSITION PURPOSE

Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned  Maintenance (PM) schedules and repairs of general and specialized  clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment.  Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on equipment maintenance in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service or coordinates training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Three or more years of equivalent experience performing corrective and planned  maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, 1st Look Cath Lab, CT etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imaging equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes , including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Pay Range 41.43-62.14

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment.Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment.Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Role Summary

We are seeking a highly experienced Guidewire Test Architect to lead the Test Strategy, Test Architecture, and Quality Engineering initiatives for our Guidewire transformation program. This role involves driving end-to-end quality across PolicyCenter, BillingCenter, ClaimCenter, and all associated integrations. The ideal candidate will provide strong technical leadership, enhance automation maturity, ensure seamless test governance, and align all testing practices with enterprise standards.

Key Responsibilities

1. Test Strategy & Planning

• Define and own the overall test strategy, test architecture, and quality governance for the Guidewire program.
• Establish test frameworks, standards, guidelines, and best practices for:
• Functional testing
• Integration testing
• End-to-end testing
• Performance testing
• Regression testing
• Partner with business, product, development, and QA teams to define test scope, priorities, and acceptance criteria.

2. Test Architecture & Automation

• Architect scalable automation frameworks for PolicyCenter, BillingCenter, and ClaimCenter.
• Lead automation efforts for Web, API, batch and integration layers using:
• Selenium
• TestNG
• Cucumber
• REST-Assured
• Integrate automated tests into CI/CD pipelines (Azure DevOps, Jenkins, GitHub Actions).
• Define coding standards, reusable components, and automation libraries to ensure maintainable and scalable automation.

3. Quality Engineering & Governance

• Ensure testing aligns with Guidewire OOTB functionalities, customizations, and edge-case validations.
• Provide technical leadership through reviews of test design, automation code, and execution reports.
• Drive quality metrics, dashboards, and reporting for progress tracking, risk identification, and decision‐making.

4. Test Management & Coordination

• Oversee end‐to‐end test cycles, environment readiness, test data management, and defect governance.
• Collaborate with onsite/offshore QA teams for consistent and on-time delivery.
• Work closely with development, architecture, and business stakeholders to troubleshoot and resolve complex issues.

Required Skills & Experience

• 10+ years of overall QA experience with 5+ years as a Test Architect in large-scale enterprise programs.
• Strong hands-on experience with Guidewire (Cloud or On‐prem) across:
• PolicyCenter
• BillingCenter
• ClaimCenter
• Integration Gateway / Edge API / GOSU functionalities
• In-depth understanding of Guidewire testing tools, test design, and test data strategies.
• Advanced experience in automation frameworks:
• Selenium, TestNG, Cucumber
• API automation (REST/SOAP)
• Knowledge of performance testing tools (LoadRunner, JMeter) is a plus.
• Proficiency in CI/CD and DevOps ecosystem (Azure DevOps, Jenkins, Git, GitHub).
• Experience leading large distributed teams in onsite/offshore delivery models.

Preferred Qualifications

• Guidewire certifications: PolicyCenter, BillingCenter, Cloud, etc.
• Experience working in Agile/Scrum environments.
• Excellent communication, coordination, and stakeholder management skills.
• Ability to mentor teams and drive continuous improvement across Quality Engineering.

The base compensation range for this role in the posted location is $122420 to $147413

Capgemini provides compensation range information in accordance with applicable national, state, provincial, and local pay transparency laws. The base compensation range listed for this position reflects the minimum and maximum target compensation Capgemini, in good faith, believes it may pay for the role at the time of this posting. This range may be subject to change as permitted by law.

The actual compensation offered to any candidate may fall outside of the posted range and will be determined based on multiple factors legally permitted in the applicable jurisdiction.

These may include, but are not limited to: Geographic location, Education and qualifications, Certifications and licenses, Relevant experience and skills, Seniority and performance, Market and business consideration, Internal pay equity.

It is not typical for candidates to be hired at or near the top of the posted compensation range.

In addition to base salary, this role may be eligible for additional compensation such as variable incentives, bonuses, or commissions, depending on the position and applicable laws.

Capgemini offers a comprehensive, non-negotiable benefits package to all regular, full-time employees. In the U.S. and Canada, available benefits are determined by local policy and eligibility and may include:

• Paid time off based on employee grade (A-F), defined by policy: Vacation: 12-25 days, depending on grade, Company paid holidays, Personal Days, Sick Leave
• Medical, dental, and vision coverage (or provincial healthcare coordination in Canada)
• Retirement savings plans (e.g., 401(k) in the U.S., RRSP in Canada)
• Life and disability insurance
• Employee assistance programs
• Other benefits as provided by local policy and eligibility

Important Notice: Compensation (including bonuses, commissions, or other forms of incentive pay) is not considered earned, vested, or payable until it becomes due under the terms of applicable plans or agreements and is subject to Capgemini's discretion, consistent with applicable laws. The Company reserves the right to amend or withdraw compensation programs at any time, within the limits of applicable legislation.

Disclaimers

Capgemini is an Equal Opportunity Employer encouraging inclusion in the workplace. Capgemini also participates in the Partnership Accreditation in Indigenous Relations (PAIR) program which supports meaningful engagement with Indigenous communities across Canada by promoting fairness, accessibility, inclusion and respect. We value the rich cultural heritage and contributions of Indigenous Peoples and actively work to create a welcoming and respectful environment. All qualified applicants will receive consideration for employment without regard to race, national origin, gender identity/expression, age, religion, disability, sexual orientation, genetics, veteran status, marital status or any other characteristic protected by law.

This is a general description of the Duties, Responsibilities and Qualifications required for this position. Physical, mental, sensory or environmental demands may be referenced in an attempt to communicate the manner in which this position traditionally is performed. Whenever necessary to provide individuals with disabilities an equal employment opportunity, Capgemini will consider reasonable accommodations that might involve varying job requirements and/or changing the way this job is performed, provided that such accommodation does not pose an undue hardship. Capgemini is committed to providing reasonable accommodation during our recruitment process. If you need assistance or accommodation, please reach out to your recruiting contact.

Please be aware that Capgemini may capture your image (video or screenshot) during the interview process and that image may be used for verification, including during the hiring and onboarding process.

Click the following link for more information on your rights as an Applicant in the United States. is a global business and technology transformation partner, helping organizations to accelerate their dual transition to a digital and sustainable world, while creating tangible impact for enterprises and society. It is a responsible and diverse group of 340,000 team members in more than 50 countries. With its strong over 55-year heritage, Capgemini is trusted by its clients to unlock the value of technology to address the entire breadth of their business needs. It delivers end-to-end services and solutions leveraging strengths from strategy and design to engineering, all fueled by its market leading capabilities in AI, generative AI, cloud and data, combined with its deep industry expertise and partner ecosystem.