Getinge, AB Jobs in Usa
283 positions found — Page 22
Catheterization Lab Technologist II - Neuro Cath
Salary not disclosed
Description Summary: The Catheterization Laboratory Technologist II is a highly skilled and experienced professional responsible for performing advanced imaging and operational tasks during a wide range of cardiac catheterization procedures, including complex structural heart cases.
This role involves expertly operating and troubleshooting specialized cath lab equipment, performing fluoro imaging, and ensuring accurate digital image acquisition while maintaining strict adherence to sterile technique and patient safety protocols.
As a Radiation Safety department representative and preceptor for junior staff, the Technologist II also serves as a key resource for advanced procedures and technology, contributing to departmental efficiency and the highest standards of patient care.
Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
Promotes Organizational Principles of Catholic Healthcare; Solidarity, Holistic Care, Respect for Human Life, Participatory Community of Work and Mutual Respect, Stewardship, Act in communion with the Church.
Ensures major equipment is operational in assigned area(s) and documents as required for quality control; reports any issues through chain of command and per hospital process.
Participates in daily room checks and stocking of supplies.
Accesses daily patient schedule and appropriate patient information for assigned procedures.
Ensures appropriate equipment, supplies, and room configuration for all procedures.
Collaborates with procedure team and Cath Lab Lead/Coordinator to ensure appropriate patient care and departmental efficiency at all times.
Ensures proper patient information is entered into cath lab computer and imaging systems.
Ensures proper procedure documentation, hemodynamic measurements/recording, and ECG recognition during assigned procedures.
Ensures patient position is appropriate and safely secured on procedure table per procedure type.
Trains and completes competencies to set up and operate cath lab equipment including, but not limited to: imaging (X-Ray, intravascular ultrasound-IVUS, intracardiac echo-ICE), contrast injector, hemodynamic system, intra-aortic balloon pump, rotational atherectomy, thrombectomy, left ventricular assist device, etc.
Supports and anticipates the needs of the physician and ensures patient safety when scrubbing procedures; moves/pans table appropriately during fluoro and X-Ray acquisition.
Adheres to aseptic technique 100% of the time during procedures and stops the line if a break in sterile technique is identified.
Adheres to organizational policies and processes related to patient safety, patient privacy, infection control (hand hygiene), and patient communication before, during, and after procedure.
Collaborates with others on the team in sharing knowledge; to gain and provide appropriate knowledge as appropriate; to foster teamwork and team cohesion.
Supports department and team by engaging in patient transport as appropriate.
Obtains and maintains proficiency in access site management.
Acts as radiation safety representative for patients and team while X-Ray is used.
Performs fluoro imaging and digital image acquisition as appropriate for procedure or as instructed by the physician.
Adheres to the attendance policy and departmental productivity standards.
Supports department and organization's commitment to Zero Harm and Customer Service.
Adheres to departmental and organizational dress code.
Understands and upholds the CHRISTUS mission, vision, and purpose.
Supports and promotes Unit based Councils, process improvement projects, and a nursing collaborative care model that meets requirements for magnet status.
Promotes and serves with respect to the CHRISTUS core values; Dignity, Integrity, Excellence, Compassion, Stewardship.
Serves as a preceptor for Technicians and Technologists I.
Acts as a team resource for advanced procedures and technology such as structural heart procedures, IABP, Impella, LVAD.
Serves as the Radiation Safety department representative.
Job Requirements: Education/Skills Graduate from an accredited school of Radiology Technology, an associate's degree in a healthcare-related field, or an acceptable equivalent required Bachelor's degree preferred Experience 2 years of Diagnostic, Interventional Radiology, or Cath/EP Lab experience is required Licenses, Registrations, or Certifications Basic Life Support (BLS) certification is required Advanced Cardiovascular Life Support (ACLS) certification is required within 6 months of hire to work/perform independently Pediatric Advanced Life Support (PALS) certification is required within 6 months of hire to work/perform independently at Pediatric facilities One of the following certifications is required (individuals whose ARRT certification lapsed prior to June 1, 2023, may qualify under LSRTBE exemption criteria): Registered Cardiovascular Invasive Specialist (RCIS) by CCI Registered Cardiac Electrophysiology Specialist (RCES) by CCI Registered Cardiac Sonographer (RCS) by CCI Radiography (R) by ARRT Cardiac Interventional Radiography (CI) by ARRT Cardiovascular Interventional Radiography (CV) by ARRT Vascular Interventional Radiography (VI) by ARRT Abdomen (AB) RDMS by ARDMS Obstetrics & Gynecology (OB/GYN) RDMS by ARDMS Adult Echocardiography (AE) RDCS by ARDMS Registered Vascular Technologist (RVT) by ARDMS State Licensure required based on modality Texas: MRT or LMRT by TMB Louisiana: LRT (R) or (F) by LSRTBE New Mexico: RRT or FUS by MIRTP NMED In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame.
Work Schedule: 5 Days
- 8 Hours Work Type: Full Time
This role involves expertly operating and troubleshooting specialized cath lab equipment, performing fluoro imaging, and ensuring accurate digital image acquisition while maintaining strict adherence to sterile technique and patient safety protocols.
As a Radiation Safety department representative and preceptor for junior staff, the Technologist II also serves as a key resource for advanced procedures and technology, contributing to departmental efficiency and the highest standards of patient care.
Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
Promotes Organizational Principles of Catholic Healthcare; Solidarity, Holistic Care, Respect for Human Life, Participatory Community of Work and Mutual Respect, Stewardship, Act in communion with the Church.
Ensures major equipment is operational in assigned area(s) and documents as required for quality control; reports any issues through chain of command and per hospital process.
Participates in daily room checks and stocking of supplies.
Accesses daily patient schedule and appropriate patient information for assigned procedures.
Ensures appropriate equipment, supplies, and room configuration for all procedures.
Collaborates with procedure team and Cath Lab Lead/Coordinator to ensure appropriate patient care and departmental efficiency at all times.
Ensures proper patient information is entered into cath lab computer and imaging systems.
Ensures proper procedure documentation, hemodynamic measurements/recording, and ECG recognition during assigned procedures.
Ensures patient position is appropriate and safely secured on procedure table per procedure type.
Trains and completes competencies to set up and operate cath lab equipment including, but not limited to: imaging (X-Ray, intravascular ultrasound-IVUS, intracardiac echo-ICE), contrast injector, hemodynamic system, intra-aortic balloon pump, rotational atherectomy, thrombectomy, left ventricular assist device, etc.
Supports and anticipates the needs of the physician and ensures patient safety when scrubbing procedures; moves/pans table appropriately during fluoro and X-Ray acquisition.
Adheres to aseptic technique 100% of the time during procedures and stops the line if a break in sterile technique is identified.
Adheres to organizational policies and processes related to patient safety, patient privacy, infection control (hand hygiene), and patient communication before, during, and after procedure.
Collaborates with others on the team in sharing knowledge; to gain and provide appropriate knowledge as appropriate; to foster teamwork and team cohesion.
Supports department and team by engaging in patient transport as appropriate.
Obtains and maintains proficiency in access site management.
Acts as radiation safety representative for patients and team while X-Ray is used.
Performs fluoro imaging and digital image acquisition as appropriate for procedure or as instructed by the physician.
Adheres to the attendance policy and departmental productivity standards.
Supports department and organization's commitment to Zero Harm and Customer Service.
Adheres to departmental and organizational dress code.
Understands and upholds the CHRISTUS mission, vision, and purpose.
Supports and promotes Unit based Councils, process improvement projects, and a nursing collaborative care model that meets requirements for magnet status.
Promotes and serves with respect to the CHRISTUS core values; Dignity, Integrity, Excellence, Compassion, Stewardship.
Serves as a preceptor for Technicians and Technologists I.
Acts as a team resource for advanced procedures and technology such as structural heart procedures, IABP, Impella, LVAD.
Serves as the Radiation Safety department representative.
Job Requirements: Education/Skills Graduate from an accredited school of Radiology Technology, an associate's degree in a healthcare-related field, or an acceptable equivalent required Bachelor's degree preferred Experience 2 years of Diagnostic, Interventional Radiology, or Cath/EP Lab experience is required Licenses, Registrations, or Certifications Basic Life Support (BLS) certification is required Advanced Cardiovascular Life Support (ACLS) certification is required within 6 months of hire to work/perform independently Pediatric Advanced Life Support (PALS) certification is required within 6 months of hire to work/perform independently at Pediatric facilities One of the following certifications is required (individuals whose ARRT certification lapsed prior to June 1, 2023, may qualify under LSRTBE exemption criteria): Registered Cardiovascular Invasive Specialist (RCIS) by CCI Registered Cardiac Electrophysiology Specialist (RCES) by CCI Registered Cardiac Sonographer (RCS) by CCI Radiography (R) by ARRT Cardiac Interventional Radiography (CI) by ARRT Cardiovascular Interventional Radiography (CV) by ARRT Vascular Interventional Radiography (VI) by ARRT Abdomen (AB) RDMS by ARDMS Obstetrics & Gynecology (OB/GYN) RDMS by ARDMS Adult Echocardiography (AE) RDCS by ARDMS Registered Vascular Technologist (RVT) by ARDMS State Licensure required based on modality Texas: MRT or LMRT by TMB Louisiana: LRT (R) or (F) by LSRTBE New Mexico: RRT or FUS by MIRTP NMED In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame.
Work Schedule: 5 Days
- 8 Hours Work Type: Full Time
Not Specified
Catheterization Laboratory Technician II - Cardio Cath
🏢 Christus Health
Salary not disclosed
Description CHRISTUS Santa Rosa Hospital – San Marcos, which originated in 1923 as Hays County Soldiers, Sailors and Marines Memorial Hospital, opened at its current Wonder World Drive location in 1983.
Our staff of more than 700 Associates works with more than 300 active and consulting physicians to provide quality services to patients and their families.
For more than 20 consecutive years, we have been named The Best Hospital in Hays County in the annual "Best of Hays" publication released by the San Marcos Daily Record.
In addition to interventional cardiac services, CHRISTUS Santa Rosa Hospital – San Marcos is a Certified Chest Pain Center and an accredited Primary Stroke Center.
We lead the region in da Vinci robotic-assisted surgery and offers a variety of specialty care services including medical imaging, rehabilitation, hospice, women's services and more.
Summary: The Catheterization Laboratory Technician II is an experienced member of the cath lab team, proficient in supporting a wide range of diagnostic and interventional cardiac procedures.
This role involves meticulous preparation of the lab, equipment, and supplies, ensuring accurate patient documentation, and maintaining a stringent sterile technique throughout procedures.
The Technician II also serves as a valuable resource and preceptor for junior technicians and technologists, sharing expertise in advanced procedures and technology while upholding the highest standards of patient safety and departmental efficiency.
Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
Promotes Organizational Principles of Catholic Healthcare; Solidarity, Holistic Care, Respect for Human Life, Participatory Community of Work and Mutual Respect, Stewardship, Act in communion with the Church.
Ensures major equipment is operational in assigned area(s) and documents as required for quality control; reports any issues through chain of command and per hospital process.
Participates in daily room checks and stocking of supplies.
Accesses daily patient schedule and appropriate patient information for assigned procedures.
Ensures appropriate equipment, supplies, and room configuration for all procedures.
Collaborates with procedure team and Cath Lab Lead/Coordinator to ensure appropriate patient care and departmental efficiency at all times.
Ensures proper patient information is entered into cath lab computer and imaging systems.
Ensures proper procedure documentation, hemodynamic measurements/recording, and ECG recognition during assigned procedures.
Ensures patient position is appropriate and safely secured on procedure table per procedure type.
Trains and completes competencies to set up and operate cath lab equipment including, but not limited to: imaging (intravascular ultrasound-IVUS, intracardiac echo-ICE), contrast injector, hemodynamic system, intra-aortic balloon pump, rotational atherectomy, thrombectomy, left ventricular assist device, etc.
Supports and anticipates the needs of the physician and ensures patient safety when scrubbing procedures; moves/pans table appropriately during fluoro and X-Ray acquisition.
Adheres to aseptic technique 100% of the time during procedures and stops the line if a break in sterile technique is identified.
Adheres to organizational policies and processes related to patient safety, patient privacy, infection control (hand hygiene), and patient communication before, during, and after procedure.
Collaborates with others on the team in sharing knowledge; to gain and provide appropriate knowledge as appropriate; to foster teamwork and team cohesion.
Supports the department and team by engaging in patient transport as appropriate.
Obtains and maintains proficiency in access site management.
Acts as radiation safety representative for patients and team while X-Ray is used but is not licensed to administer fluoro imaging.
Adheres to the attendance policy and departmental productivity standards.
Supports the department and organization's commitment to Zero Harm and Customer Service.
Adheres to departmental and organizational dress code.
Understands and upholds the CHRISTUS mission, vision, and purpose.
Supports and promotes Unit-based Councils, process improvement projects, and a nursing collaborative care model that meets requirements for magnet status.
Promotes and serves with respect to the CHRISTUS core values: Dignity, Integrity, Excellence, Compassion, Stewardship.
Serves as a preceptor for Technicians and Technologists I.
Acts as a team resource for advanced procedures and technology such as structural heart procedures, IABP, Impella, and LVAD.
Job Requirements: Education/Skills Associate's degree in cardiovascular technology, radiologic technology, or a healthcare-related field preferred Experience 2 years of Diagnostic, Interventional Radiology, or Cath/EP Lab experience is required Licenses, Registrations, or Certifications Basic Life Support (BLS) certification is required Advanced Cardiovascular Life Support (ACLS) certification is required within 6 months of hire to work/perform independently Pediatric Advanced Life Support (PALS) certification is required within 6 months of hire to work/perform independently at Pediatric facilities One of the following certifications is required: Registered Cardiovascular Invasive Specialist (RCIS) by CCI Registered Cardiac Electrophysiology Specialist (RCES) by CCI Registered Cardiac Sonographer (RCS) by CCI Radiography (R) by ARRT Cardiac Interventional Radiography (CI) by ARRT Cardiovascular Interventional Radiography (CV) by ARRT Vascular Interventional Radiography (VI) by ARRT Abdomen (AB) RDMS by ARDMS Obstetrics & Gynecology (OB/GYN) RDMS by ARDMS Adult Echocardiography (AE) RDCS by ARDMS Registered Vascular Technologist (RVT) by ARDMS In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame.
Work Schedule: 5 Days
- 8 Hours Work Type: Full Time
Our staff of more than 700 Associates works with more than 300 active and consulting physicians to provide quality services to patients and their families.
For more than 20 consecutive years, we have been named The Best Hospital in Hays County in the annual "Best of Hays" publication released by the San Marcos Daily Record.
In addition to interventional cardiac services, CHRISTUS Santa Rosa Hospital – San Marcos is a Certified Chest Pain Center and an accredited Primary Stroke Center.
We lead the region in da Vinci robotic-assisted surgery and offers a variety of specialty care services including medical imaging, rehabilitation, hospice, women's services and more.
Summary: The Catheterization Laboratory Technician II is an experienced member of the cath lab team, proficient in supporting a wide range of diagnostic and interventional cardiac procedures.
This role involves meticulous preparation of the lab, equipment, and supplies, ensuring accurate patient documentation, and maintaining a stringent sterile technique throughout procedures.
The Technician II also serves as a valuable resource and preceptor for junior technicians and technologists, sharing expertise in advanced procedures and technology while upholding the highest standards of patient safety and departmental efficiency.
Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
Promotes Organizational Principles of Catholic Healthcare; Solidarity, Holistic Care, Respect for Human Life, Participatory Community of Work and Mutual Respect, Stewardship, Act in communion with the Church.
Ensures major equipment is operational in assigned area(s) and documents as required for quality control; reports any issues through chain of command and per hospital process.
Participates in daily room checks and stocking of supplies.
Accesses daily patient schedule and appropriate patient information for assigned procedures.
Ensures appropriate equipment, supplies, and room configuration for all procedures.
Collaborates with procedure team and Cath Lab Lead/Coordinator to ensure appropriate patient care and departmental efficiency at all times.
Ensures proper patient information is entered into cath lab computer and imaging systems.
Ensures proper procedure documentation, hemodynamic measurements/recording, and ECG recognition during assigned procedures.
Ensures patient position is appropriate and safely secured on procedure table per procedure type.
Trains and completes competencies to set up and operate cath lab equipment including, but not limited to: imaging (intravascular ultrasound-IVUS, intracardiac echo-ICE), contrast injector, hemodynamic system, intra-aortic balloon pump, rotational atherectomy, thrombectomy, left ventricular assist device, etc.
Supports and anticipates the needs of the physician and ensures patient safety when scrubbing procedures; moves/pans table appropriately during fluoro and X-Ray acquisition.
Adheres to aseptic technique 100% of the time during procedures and stops the line if a break in sterile technique is identified.
Adheres to organizational policies and processes related to patient safety, patient privacy, infection control (hand hygiene), and patient communication before, during, and after procedure.
Collaborates with others on the team in sharing knowledge; to gain and provide appropriate knowledge as appropriate; to foster teamwork and team cohesion.
Supports the department and team by engaging in patient transport as appropriate.
Obtains and maintains proficiency in access site management.
Acts as radiation safety representative for patients and team while X-Ray is used but is not licensed to administer fluoro imaging.
Adheres to the attendance policy and departmental productivity standards.
Supports the department and organization's commitment to Zero Harm and Customer Service.
Adheres to departmental and organizational dress code.
Understands and upholds the CHRISTUS mission, vision, and purpose.
Supports and promotes Unit-based Councils, process improvement projects, and a nursing collaborative care model that meets requirements for magnet status.
Promotes and serves with respect to the CHRISTUS core values: Dignity, Integrity, Excellence, Compassion, Stewardship.
Serves as a preceptor for Technicians and Technologists I.
Acts as a team resource for advanced procedures and technology such as structural heart procedures, IABP, Impella, and LVAD.
Job Requirements: Education/Skills Associate's degree in cardiovascular technology, radiologic technology, or a healthcare-related field preferred Experience 2 years of Diagnostic, Interventional Radiology, or Cath/EP Lab experience is required Licenses, Registrations, or Certifications Basic Life Support (BLS) certification is required Advanced Cardiovascular Life Support (ACLS) certification is required within 6 months of hire to work/perform independently Pediatric Advanced Life Support (PALS) certification is required within 6 months of hire to work/perform independently at Pediatric facilities One of the following certifications is required: Registered Cardiovascular Invasive Specialist (RCIS) by CCI Registered Cardiac Electrophysiology Specialist (RCES) by CCI Registered Cardiac Sonographer (RCS) by CCI Radiography (R) by ARRT Cardiac Interventional Radiography (CI) by ARRT Cardiovascular Interventional Radiography (CV) by ARRT Vascular Interventional Radiography (VI) by ARRT Abdomen (AB) RDMS by ARDMS Obstetrics & Gynecology (OB/GYN) RDMS by ARDMS Adult Echocardiography (AE) RDCS by ARDMS Registered Vascular Technologist (RVT) by ARDMS In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame.
Work Schedule: 5 Days
- 8 Hours Work Type: Full Time
Not Specified
Ultrasound Technologist - Imaging Ultrasound
🏢 Christus Health
Salary not disclosed
DescriptionSummary:
The Ultrasound Technologist will perform a wide variety of routine and advanced imaging procedures, will provide support for other imaging technologists as needed, and help to facilitate smooth and efficient patient flow. The Ultrasound Technologist must be able to handle the movement, set-up, and operation of medical ultrasound equipment. The technologist will demonstrate flexibility by working other shifts and/or at other campuses as needed or required. The technologist must be able to troubleshoot basic maintenance, participate in QA, and resolve issues related to image processing and the image archiving system. Expectation to participate in ongoing education, safety, and technical advances within their scope of licensure. The technologist will adhere to, and maintain, the expected imaging competencies as outlined by management. Behavior and communication skills must align with the organization's mission, values, and culture.
Responsibilities:
Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.Demonstrates adherence to the Core Values of CHRISTUS Health.Maintains consistency with Administrative and Departmental policies with appropriate behavior, dress, attitude, attendance, confidentiality, professionalism, and reliability.Promotes staff growth, development, and employee engagement by collaborating with management, coworkers, and physicians to create an optimal work environment.Promotes exceptional physician satisfaction by providing meaningful assistance to radiologists and referring physicians.Performs all duties in a manner that protects the confidentiality of patients and does not solicit or disclose any confidential information unless it is necessary in the performance of assigned job duties.Appropriately adapt assigned patient assessment, treatment, and/or care methods to accommodate the unique physical, psychosocial, cultural, spiritual, age-specific, and other developmental needs of each patient served.Ensures compliance with all policies, procedures, and standards of care as deemed appropriate by State and Federal agencies, the hospital, and other regulatory entities.Performs examinations/procedures as needed to assist in patient throughput within the scope of the Manager's license(s), certification(s), and/or documented competencies.Demonstrates flexibility by working other shifts and at other campuses as needed or required.Ensures completed exams are scanned and stored correctly in PACS.Ability to follow PACS downtime procedures as a PACS Superuser and escalate any problem(s) or issue(s) to the PACS administrator or Designee if needed.Troubleshoots and reports any equipment malfunctions to the Director/Manager and/or Biomedical personnel; does appropriate follow-up.Performs other duties as assigned.
Job Requirements:
Education/SkillsGraduate of an accredited school of Ultrasound Technology or other accepted and approved equivalent requiredExperience1 year of ultrasound scanning experience preferredBasic computer experience requiredLicenses, Registrations, or CertificationsRequires one of the following within 1 year of hire:
Sonography (S) by ARRTAbdomen (AB) RDMS by ARDMSObstetrics & Gynecology (OB/GYN) RDMS by ARDMS
Prefers one of the following, along with the required:
Vascular Sonography (VS) by ARRTBreast Sonography (BS) by ARRTBreast (BR) RDMS by ARDMSAdult Echocardiography (AE) RDCS by ARDMSRegistered Vascular Technologist (RVT) by ARDMS
State Licensure is required if in New Mexico
DMS by MIRTP NMED
BLS requiredIn accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame.
Work Schedule:
8:30PM - 7AM
Work Type:
Full Time
The Ultrasound Technologist will perform a wide variety of routine and advanced imaging procedures, will provide support for other imaging technologists as needed, and help to facilitate smooth and efficient patient flow. The Ultrasound Technologist must be able to handle the movement, set-up, and operation of medical ultrasound equipment. The technologist will demonstrate flexibility by working other shifts and/or at other campuses as needed or required. The technologist must be able to troubleshoot basic maintenance, participate in QA, and resolve issues related to image processing and the image archiving system. Expectation to participate in ongoing education, safety, and technical advances within their scope of licensure. The technologist will adhere to, and maintain, the expected imaging competencies as outlined by management. Behavior and communication skills must align with the organization's mission, values, and culture.
Responsibilities:
Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.Demonstrates adherence to the Core Values of CHRISTUS Health.Maintains consistency with Administrative and Departmental policies with appropriate behavior, dress, attitude, attendance, confidentiality, professionalism, and reliability.Promotes staff growth, development, and employee engagement by collaborating with management, coworkers, and physicians to create an optimal work environment.Promotes exceptional physician satisfaction by providing meaningful assistance to radiologists and referring physicians.Performs all duties in a manner that protects the confidentiality of patients and does not solicit or disclose any confidential information unless it is necessary in the performance of assigned job duties.Appropriately adapt assigned patient assessment, treatment, and/or care methods to accommodate the unique physical, psychosocial, cultural, spiritual, age-specific, and other developmental needs of each patient served.Ensures compliance with all policies, procedures, and standards of care as deemed appropriate by State and Federal agencies, the hospital, and other regulatory entities.Performs examinations/procedures as needed to assist in patient throughput within the scope of the Manager's license(s), certification(s), and/or documented competencies.Demonstrates flexibility by working other shifts and at other campuses as needed or required.Ensures completed exams are scanned and stored correctly in PACS.Ability to follow PACS downtime procedures as a PACS Superuser and escalate any problem(s) or issue(s) to the PACS administrator or Designee if needed.Troubleshoots and reports any equipment malfunctions to the Director/Manager and/or Biomedical personnel; does appropriate follow-up.Performs other duties as assigned.
Job Requirements:
Education/SkillsGraduate of an accredited school of Ultrasound Technology or other accepted and approved equivalent requiredExperience1 year of ultrasound scanning experience preferredBasic computer experience requiredLicenses, Registrations, or CertificationsRequires one of the following within 1 year of hire:
Sonography (S) by ARRTAbdomen (AB) RDMS by ARDMSObstetrics & Gynecology (OB/GYN) RDMS by ARDMS
Prefers one of the following, along with the required:
Vascular Sonography (VS) by ARRTBreast Sonography (BS) by ARRTBreast (BR) RDMS by ARDMSAdult Echocardiography (AE) RDCS by ARDMSRegistered Vascular Technologist (RVT) by ARDMS
State Licensure is required if in New Mexico
DMS by MIRTP NMED
BLS requiredIn accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame.
Work Schedule:
8:30PM - 7AM
Work Type:
Full Time
Not Specified
N
Electrical Technician
Salary not disclosed
Nucor is North America's largest recycler and most diversified steel and steel products company.
Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.
Basic Job Functions: This position includes but is not limited to: • The successful candidate will possess a working knowledge of electrical principles and practical experience as it relates to the electrical maintenance function.
• The technician will provide electrical support to the production crews, maintain, troubleshoot, and repair electrical and automation systems.
• The qualified candidate must be willing to work rotating shifts, including nights, weekends, vacation coverage, and holidays.
Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Minimum Requirements: Two-year degree, successful completion of electrical trade school, or a minimum of three years industrial experience or military.
Detailed Selection Criteria: • Communication Skills
- The ability to communicate information and ideas so others will understand.
• Initiative
- Willingness to take on responsibilities and challenges.
• Problem Solving & Judgement/Decision Making
- Identifying problems and analyzing or reviewing related information to develop and evaluate options and implement solutions.
• Teamwork
- Working as part of a coordinated effort with others to achieve a common goal.
• Engineering and Technology
- Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to work at hand.
• Dependability-Being reliable, responsible, and dependable, and committed to fulfilling obligations.
Preferences: • NFPA 70E training and applied experience • Knowledge of automation and networking equipment and processes such as PID/closed loop control systems, networking tools and standards, Variable Frequency Drive experience (ABB, AB), and HMI programming and troubleshooting • Overhead crane knowledge and repair experience • Basis pneumatic and hydraulic system knowledge
Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.
Basic Job Functions: This position includes but is not limited to: • The successful candidate will possess a working knowledge of electrical principles and practical experience as it relates to the electrical maintenance function.
• The technician will provide electrical support to the production crews, maintain, troubleshoot, and repair electrical and automation systems.
• The qualified candidate must be willing to work rotating shifts, including nights, weekends, vacation coverage, and holidays.
Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Minimum Requirements: Two-year degree, successful completion of electrical trade school, or a minimum of three years industrial experience or military.
Detailed Selection Criteria: • Communication Skills
- The ability to communicate information and ideas so others will understand.
• Initiative
- Willingness to take on responsibilities and challenges.
• Problem Solving & Judgement/Decision Making
- Identifying problems and analyzing or reviewing related information to develop and evaluate options and implement solutions.
• Teamwork
- Working as part of a coordinated effort with others to achieve a common goal.
• Engineering and Technology
- Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to work at hand.
• Dependability-Being reliable, responsible, and dependable, and committed to fulfilling obligations.
Preferences: • NFPA 70E training and applied experience • Knowledge of automation and networking equipment and processes such as PID/closed loop control systems, networking tools and standards, Variable Frequency Drive experience (ABB, AB), and HMI programming and troubleshooting • Overhead crane knowledge and repair experience • Basis pneumatic and hydraulic system knowledge
Not Specified
Sheet Metal Fabricator/TIG Welder
Salary not disclosed
Accentuate Staffing is assisting a leading custom equipment manufacturer in Durham, NC who is looking for a Sheet Metal Fabricator/TIG Welder to join their team.
This is a direct hire opportunity working 6:30am- Responsibilities: Fabricator will fabricate parts, tables, frames, and custom production equipment according to blueprints and specifications.
Fabricator will utilize TIG welding techniques to join and fabricate sheet metal components.
Fabricator will interpret technical drawings and schematics to ensure accurate fabrication.
Fabricator will perform quality inspections to maintain high standards of craftsmanship.
Fabricator will collaborate with team members to optimize production processes and workflow efficiency.
Requirements: Candidates must have 5+ years Sheet Metal Fabrication and TIG welding experience.
Candidates must be highly proficient in TIG welding techniques and equipment.
Candidates must have a strong understanding of metal fabrication processes and principles.
Candidates must be proficient reading and interpreting technical drawings, blueprints, and schematics.
Candidates must be detail-oriented with a focus on quality craftsmanship.
Candidates must have excellent problem-solving skills and a proactive attitude.
Candidates must have prior experience working with stainless steel.
Benefits: Competitive salary commensurate with experience.
Health, dental, and vision insurance options.
Retirement savings plan with employer match.
Paid time off and holidays, 3 day weekends.
Assisting in fabrication and installation of sheet metal fittings Supervise sheet metal fabrication employees on 3 shifts Finished metal stampings on conveyors Expanding of copper tubing to fin stock Sheet metal fabrication skills Produce abs plastics/sheet metal components Fabricate and assemble sheet metal products Fabricate and assemble structural metal products Using a variety of sheet metal materials Set up and operate metal punch presses Cutting out metal to spec's, install with an impact wrench Refurbish and build metal buildings Fabricate and assemble metal sheets according to blueprints Perform all aspects of sheet metal fabrication used in the production of chillers and heat exchanger packages Construct paint booths in a sheet metal fabrication shop Perform a variety of routine and repetitive procedures and assist in the fabrication, build-up of assemblies of various types of composites/metal materials Maintain fabrication equipment, machines, and tools to prevent manufacturing delays related to fabrication downtime Prioritizing fabrication for approved employee suggestion improvements devices Insert, attach metal and plastic components per order Assemble metal products for framework for the industrial insulation market Using oxy/acetyene, gas metal arc welding (GMAW) and shielded metal arc welding (SMAW)
This is a direct hire opportunity working 6:30am- Responsibilities: Fabricator will fabricate parts, tables, frames, and custom production equipment according to blueprints and specifications.
Fabricator will utilize TIG welding techniques to join and fabricate sheet metal components.
Fabricator will interpret technical drawings and schematics to ensure accurate fabrication.
Fabricator will perform quality inspections to maintain high standards of craftsmanship.
Fabricator will collaborate with team members to optimize production processes and workflow efficiency.
Requirements: Candidates must have 5+ years Sheet Metal Fabrication and TIG welding experience.
Candidates must be highly proficient in TIG welding techniques and equipment.
Candidates must have a strong understanding of metal fabrication processes and principles.
Candidates must be proficient reading and interpreting technical drawings, blueprints, and schematics.
Candidates must be detail-oriented with a focus on quality craftsmanship.
Candidates must have excellent problem-solving skills and a proactive attitude.
Candidates must have prior experience working with stainless steel.
Benefits: Competitive salary commensurate with experience.
Health, dental, and vision insurance options.
Retirement savings plan with employer match.
Paid time off and holidays, 3 day weekends.
Assisting in fabrication and installation of sheet metal fittings Supervise sheet metal fabrication employees on 3 shifts Finished metal stampings on conveyors Expanding of copper tubing to fin stock Sheet metal fabrication skills Produce abs plastics/sheet metal components Fabricate and assemble sheet metal products Fabricate and assemble structural metal products Using a variety of sheet metal materials Set up and operate metal punch presses Cutting out metal to spec's, install with an impact wrench Refurbish and build metal buildings Fabricate and assemble metal sheets according to blueprints Perform all aspects of sheet metal fabrication used in the production of chillers and heat exchanger packages Construct paint booths in a sheet metal fabrication shop Perform a variety of routine and repetitive procedures and assist in the fabrication, build-up of assemblies of various types of composites/metal materials Maintain fabrication equipment, machines, and tools to prevent manufacturing delays related to fabrication downtime Prioritizing fabrication for approved employee suggestion improvements devices Insert, attach metal and plastic components per order Assemble metal products for framework for the industrial insulation market Using oxy/acetyene, gas metal arc welding (GMAW) and shielded metal arc welding (SMAW)
Not Specified
US, Ultrasound Technologist - Longview - PRN (Hiring Immediately)
🏢 Christus Health
Salary not disclosed
Description
Summary:
The Ultrasound Technologist will perform a wide variety of routine and advanced imaging procedures, will provide support for other imaging technologists as needed, and help to facilitate smooth and efficient patient flow. The Ultrasound Technologist must be able to handle the movement, set-up, and operation of medical ultrasound equipment. The technologist will demonstrate flexibility by working other shifts and/or at other campuses as needed or required. The technologist must be able to troubleshoot basic maintenance, participate in QA, and resolve issues related to image processing and the image archiving system. Expectation to participate in ongoing education, safety, and technical advances within their scope of licensure. The technologist will adhere to, and maintain, the expected imaging competencies as outlined by management. Behavior and communication skills must align with the organization's mission, values, and culture.
Responsibilities:
- Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
- Demonstrates adherence to the Core Values of CHRISTUS Health.
- Maintains consistency with Administrative and Departmental policies with appropriate behavior, dress, attitude, attendance, confidentiality, professionalism, and reliability.
- Promotes staff growth, development, and employee engagement by collaborating with management, coworkers, and physicians to create an optimal work environment.
- Promotes exceptional physician satisfaction by providing meaningful assistance to radiologists and referring physicians.
- Performs all duties in a manner that protects the confidentiality of patients and does not solicit or disclose any confidential information unless it is necessary in the performance of assigned job duties.
- Appropriately adapt assigned patient assessment, treatment, and/or care methods to accommodate the unique physical, psychosocial, cultural, spiritual, age-specific, and other developmental needs of each patient served.
- Ensures compliance with all policies, procedures, and standards of care as deemed appropriate by State and Federal agencies, the hospital, and other regulatory entities.
- Performs examinations/procedures as needed to assist in patient throughput within the scope of the Manager’s license(s), certification(s), and/or documented competencies.
- Demonstrates flexibility by working other shifts and at other campuses as needed or required.
- Ensures completed exams are scanned and stored correctly in PACS.
- Ability to follow PACS downtime procedures as a PACS Superuser and escalate any problem(s) or issue(s) to the PACS administrator or Designee if needed.
- Troubleshoots and reports any equipment malfunctions to the Director/Manager and/or Biomedical personnel; does appropriate follow-up.
- Performs other duties as assigned.
Job Requirements:
Education/Skills
- Graduate of an accredited school of Ultrasound Technology or other accepted and approved equivalent required
Experience
- 1 year of ultrasound scanning experience preferred
- Basic computer experience required
Licenses, Registrations, or Certifications
- Requires one of the following within 1 year of hire:
- Sonography (S) by ARRT
- Abdomen (AB) RDMS by ARDMS
- Prefers one of the following, along with the required:
- Vascular Sonography (VS) by ARRT
- Breast Sonography (BS) by ARRT
- Breast (BR) RDMS by ARDMS
- Obstetrics & Gynecology (OB/GYN) RDMS by ARDMS
- Adult Echocardiography (AE) RDCS by ARDMS
- Registered Vascular Technologist (RVT) by ARDMS
- State Licensure is required if in New Mexico
- DMS by MIRTP NMED
- BLS required
Work Schedule:
PRN
Work Type:
Per Diem As Needed
temporary
S
Sonographer Level I, II, or III - Rad-Ultrasound
Salary not disclosed
Job Description
Per the Collective Bargaining Agreement, current bargaining unit employees have priority consideration for this position if they apply within seven (7) days of the posting date. After this period, all applicants will be considered equally.
Primary Shift: 1500-2330
Secondary Shift: 0830-1700, 1200-2030
GENERAL SUMMARY:
Performs diagnostic ultrasounds on patients as ordered by a licensed provider, in an ethical and professional manner. Assists in all aspects of Radiology Ultrasound.
QUALIFICATIONS:
Education/Skills Required:
1. Must be a graduate of an accredited Ultrasound Technology Program.
2. Must be registered by RDMS (Ab, OB or RVT) or pass the RDMS Registry within one year of meeting the eligibility requirements. Eligibility requirements will be reviewed by employee and manager / supervisor. In the event that an employee has unsuccessfully attempted to become registered within the required timeframe, the employee is granted a six-month extension to become registered / credentialed.
3. Proficient knowledge of anatomy, physiology, and medical terminology.
4. Requires sufficient sensitivity and interpersonal skills in dealing with apprehensive patients and family in a professional and compassionate manner.
5. Requires positive and effective communication skills for interaction with physicians and staff in any situation.
6. Requires the ability to think and act quickly to deliver efficient quality care in a variety of stressful situations.
7. Must maintain a working knowledge of all ultrasound equipment.
8. AHA-BLS certification is required within 6 months of hire or a current non-AHA-BLS card will be honored up to date of renewal.
As applicable, the individual has training/competency in attending to the special needs and/or behaviors appropriate to the age of the patients for which care is being provided.
Per the Collective Bargaining Agreement, current bargaining unit employees have priority consideration for this position if they apply within seven (7) days of the posting date. After this period, all applicants will be considered equally.
Primary Shift: 1500-2330
Secondary Shift: 0830-1700, 1200-2030
GENERAL SUMMARY:
Performs diagnostic ultrasounds on patients as ordered by a licensed provider, in an ethical and professional manner. Assists in all aspects of Radiology Ultrasound.
QUALIFICATIONS:
Education/Skills Required:
1. Must be a graduate of an accredited Ultrasound Technology Program.
2. Must be registered by RDMS (Ab, OB or RVT) or pass the RDMS Registry within one year of meeting the eligibility requirements. Eligibility requirements will be reviewed by employee and manager / supervisor. In the event that an employee has unsuccessfully attempted to become registered within the required timeframe, the employee is granted a six-month extension to become registered / credentialed.
3. Proficient knowledge of anatomy, physiology, and medical terminology.
4. Requires sufficient sensitivity and interpersonal skills in dealing with apprehensive patients and family in a professional and compassionate manner.
5. Requires positive and effective communication skills for interaction with physicians and staff in any situation.
6. Requires the ability to think and act quickly to deliver efficient quality care in a variety of stressful situations.
7. Must maintain a working knowledge of all ultrasound equipment.
8. AHA-BLS certification is required within 6 months of hire or a current non-AHA-BLS card will be honored up to date of renewal.
As applicable, the individual has training/competency in attending to the special needs and/or behaviors appropriate to the age of the patients for which care is being provided.
Not Specified
D
Snow Park Sous Chef - Winter 2025 - 26
$28
Seasonal
Classic, consistent quality from a winning team!
Deer Valley Resort is nestled in the Wasatch Mountains of Utah, in the historic mining town of Park City which has evolved into an exciting and diverse mountain ski town. Our staff consists of locals, transplants, seasonal workers from all 50 states and international students from around the globe. We are a diverse workforce where everyone feels welcome, appreciated, and valued. No matter if you are 14 or 84 years, there is a place for you in the Deer Valley family! (Last year over 1,100 staff members celebrated their fifth season or more at Deer Valley).
PURPOSE OF POSITION: A Sous Chef is responsible for assisting the executive chef with daily supervision and direction of kitchen staff.
RESPONSIBILITIES:
QUALIFICATIONS:
DATES OF EMPLOYMENT:
PAY RATE:
Deer Valley Resort is an Equal Opportunity Employer.
Classic, consistent quality from a winning team!
Deer Valley Resort is nestled in the Wasatch Mountains of Utah, in the historic mining town of Park City which has evolved into an exciting and diverse mountain ski town. Our staff consists of locals, transplants, seasonal workers from all 50 states and international students from around the globe. We are a diverse workforce where everyone feels welcome, appreciated, and valued. No matter if you are 14 or 84 years, there is a place for you in the Deer Valley family! (Last year over 1,100 staff members celebrated their fifth season or more at Deer Valley).
- Ski perks (vary based on employment status) may include Deer Valley season pass, free skiing or riding at other Alterra Resorts and select local Utah resorts
- Friends and family ski discounts, free staff ski lessons and discounted rentals (winter staff only)
- Subsidized meals at Employee Dining Rooms offered for staff while on shift
- Subsidized housing options available for seasonal full-time staff
- Discounts for staff members at restaurants, shops, and service providers in Park City
- Healthcare options are available for staff members
- 401k plan with company match
PURPOSE OF POSITION: A Sous Chef is responsible for assisting the executive chef with daily supervision and direction of kitchen staff.
RESPONSIBILITIES:
- Operate the kitchen with great attention to food quality, taste, and presentation
- Develop new menu items in conjunction with the executive chef
- Direct kitchen personnel in the absence of the executive chef
- Carry out administrative functions, including forecasting, payroll, scheduling, recruiting, training, supervising, and disciplining kitchen staff
- Organize an efficient flow of production and assure quality and portion consistency in recipes
- Ensure proper maintenance of the equipment and facilities
- Maintain safe and sanitary working conditions in accordance with health codes
- Other duties as assigned
QUALIFICATIONS:
- Experience in a supervisory capacity in a fine dining restaurant kitchen required
- Possess a current SafeServe certificate
- Able to lift and carry a minimum of 40 lbs.
- Ab le to withstand frequent up/down, twisting, and repetitive movements
DATES OF EMPLOYMENT:
- November - April
PAY RATE:
- Pay: $28.00 per hour
Deer Valley Resort is an Equal Opportunity Employer.
permanent
D
East Village Sous Chef - Winter 2025 - 26
🏢 Deer Valley Resort
$28
Seasonal
Classic, consistent quality from a winning team!
Deer Valley Resort is nestled in the Wasatch Mountains of Utah, in the historic mining town of Park City which has evolved into an exciting and diverse mountain ski town. Our staff consists of locals, transplants, seasonal workers from all 50 states and international students from around the globe. We are a diverse workforce where everyone feels welcome, appreciated, and valued. No matter if you are 14 or 84 years, there is a place for you in the Deer Valley family! (Last year over 1,100 staff members celebrated their fifth season or more at Deer Valley).
PURPOSE OF POSITION: A Sous Chef is responsible for assisting the executive chef with daily supervision and direction of kitchen staff.
RESPONSIBILITIES:
QUALIFICATIONS:
DATES OF EMPLOYMENT:
PAY RATE:
Deer Valley Resort is an Equal Opportunity Employer.
Classic, consistent quality from a winning team!
Deer Valley Resort is nestled in the Wasatch Mountains of Utah, in the historic mining town of Park City which has evolved into an exciting and diverse mountain ski town. Our staff consists of locals, transplants, seasonal workers from all 50 states and international students from around the globe. We are a diverse workforce where everyone feels welcome, appreciated, and valued. No matter if you are 14 or 84 years, there is a place for you in the Deer Valley family! (Last year over 1,100 staff members celebrated their fifth season or more at Deer Valley).
- Ski perks (vary based on employment status) may include Deer Valley season pass, free skiing or riding at other Alterra Resorts and select local Utah resorts
- Friends and family ski discounts, free staff ski lessons and discounted rentals (winter staff only)
- Subsidized meals at Employee Dining Rooms offered for staff while on shift
- Subsidized housing options available for seasonal full-time staff
- Discounts for staff members at restaurants, shops, and service providers in Park City
- Healthcare options are available for staff members
- 401k plan with company match
PURPOSE OF POSITION: A Sous Chef is responsible for assisting the executive chef with daily supervision and direction of kitchen staff.
RESPONSIBILITIES:
- Operate the kitchen with great attention to food quality, taste, and presentation
- Develop new menu items in conjunction with the executive chef
- Direct kitchen personnel in the absence of the executive chef
- Carry out administrative functions, including forecasting, payroll, scheduling, recruiting, training, supervising, and disciplining kitchen staff
- Organize an efficient flow of production and assure quality and portion consistency in recipes
- Ensure proper maintenance of the equipment and facilities
- Maintain safe and sanitary working conditions in accordance with health codes
- Other duties as assigned
QUALIFICATIONS:
- Experience in a supervisory capacity in a fine dining restaurant kitchen required
- Possess a current SafeServe certificate
- Able to lift and carry a minimum of 40 lbs.
- Ab le to withstand frequent up/down, twisting, and repetitive movements
DATES OF EMPLOYMENT:
- Winter 2025 - 26
PAY RATE:
- Pay: $28.00 per hour
Deer Valley Resort is an Equal Opportunity Employer.
permanent
Creative Project Manager
Salary not disclosed
Creative Project Manager
Position Overview
Our enterprise client is looking for an experienced Creative Project Manager to lead and coordinate their AI and general AB creative initiatives. This role is ideal for a seasoned project manager with a strong background in creative production, budget oversight, and stakeholder communication. The successful candidate will be highly organized, financially savvy, and comfortable managing complex, multi-stakeholder projects in a fast-paced environment.
This is a full-time, contract hybrid role, 3 days on-site out of Seattle, WA.
Key Responsibilities
Schedule Management
- Develop and maintain detailed project schedules using Asana and other project management tools
- Create and manage production calendars for multiple concurrent projects
- Identify and mitigate schedule risks and dependencies
- Track milestones and deliverables across project phases
- Coordinate meetings and facilitate approvals aligned with production timelines
Budget Management
- Develop and manage project budgets ranging from $1K to $500K
- Track expenses and maintain project-specific financial records
- Approve vendor invoices and contractor payments upon deliverable confirmation
- Identify cost-saving opportunities without compromising quality
- Manage change orders and scope adjustments
Stakeholder Communications
- Facilitate regular status meetings with cross-functional teams
- Develop and distribute weekly project updates to key stakeholders
- Manage stakeholder expectations around timelines, deliverables, and scope
Production Oversight
- Guide projects from pre-production through final delivery
- Coordinate with internal teams and external vendors
- Support asset organization and archiving
- Oversee content review and approval processes
Qualifications
- 5+ years of project management experience in creative agencies or tech companies
- Proven track record managing budgets and schedules for creative projects
- Strong proficiency in Asana
- Experience with Figma and Canva preferred
- Familiarity with creative AI tools is a plus
- Deep understanding of creative production workflows
- Excellent documentation and reporting skills
Deliverables
- Weekly status reports and stakeholder updates
- Weekly budget tracking
- Project schedules and timeline tracking in Asana
- Risk assessment and mitigation plans
- Production calendars and resource allocation plans
- Project closure reports and lessons learned documentation
Not Specified
jobs by
✓ All jobs loaded