Geo Instruments Canada Jobs in Usa

• 
  
• Read and interpret blueprints, sketches, drawings, routing instructions, manuals, specifications or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations and setup requirements.
  
• Properly select, align and secure work holding. Must be able to improvise setups using common tooling such as risers, angle plates etc.
  
• Monitor and/or develop speed, feed, depth or angle of cut during machining operations.
  
• Must observe machine operation to predict or detect malfunctions or out of tolerance machining conditions and adjust machine controls /control media as required.
  
• Verify that all machined details meet print and router specifications, using precision measuring instruments and recording data results. Responsible to ensure first piece inspection is completed for multiple piece runs.
  
• Monitor and maintain proper cleanliness of machine and work area on a daily basis.
  

• 
  
• A minimum of two years of trade school, vocational education or apprenticeship
  
• A minimum of three to five years of CNC machining experience
  
• General machining knowledge, shop math, precision measuring instruments, blueprint reading and GD&T
  
• Part and tool probing
  
• Experience with high speed machining preferred (16 - 27k RPM)
  
• Some openings may require specialized experience with particular machining processes or equipment
  
• Experience with Siemens 840D Control software a plus
  

• 
  
• Present a positive attitude
  
• Be able to work well with meeting deadlines
  
• Have a good work ethic and attendance
  
• Have the ability to communicate well with peers, engineers and leadership
  

• 
  
• Building complex assemblies by performing the layout, fit-up, assembly and welding operations.
  
• Certify to multiple weld specifications as required for different materials and weld processes.
  
• Reading and interpreting blueprints, sketches, drawings, routing instructions, manuals, specifications and procedures to determine dimensions and tolerances of finished weldment.
  
• Measuring, marking and scribing dimensions and reference points on material or work pieces as guides for subsequent machining or fabrication operations as required by router instructions and good shop practice.
  
• Using precision measurement instruments.
  
• Operating hand tools and other shop equipment such as grinders, positioners, turn rolls.
  
• Perform material handling of large weldments using overhead cranes, using proper lifting techniques with high degree of attention to safety.
  
• May operate fork truck, with certification requirements
  
• Ensure proper data entry of inspection and other information into computer system.
  
• Monitor and maintain proper cleanliness and function of equipment and work area on a daily basis.
  

• 
  
• A minimum of two years of trade school or vocational education or appropriate work experience in welding
  
• General welding knowledge, shop math, precision measuring instruments, blueprint reading and welding symbols
  
• Must have MIG and TIG welding experience; physical weld test will be required in selection process to meet minimum criteria for qualification.
  
• Material familiarity with carbon and stainless steel, nickel-based alloys and aluminum
  
• Robotic welding/programming a plus
  

• 
  
• Present a positive attitude
  
• Be able to work well with meeting deadlines
  
• Have a good work ethic and attendance
  
• Have the ability to communicate well with peers, engineers and leadership
  

MMR Project Engineer

Company Culture:

At MMR, our most valuable assets are not our buildings or equipment, it is our family of employees with diverse backgrounds and experiences. Our investment in training programs and resources allows our employees to reach both their personal and professional goals. This is evident with MMR receiving numerous awards including “Best Place to Work” and consistently being recognized as one of the top Engineering News Record’s “Annual Specialty Contractors.”

Organization Description:

MMR has served as the industry leader in instrumentation and electrical construction, maintenance, and technical services for over 30 years. Our diverse list of clients allows us the unique ability to work across industry lines in the oil and gas upstream and midstream as well as chemical and petrochemical downstream, industrial manufacturing, power generation, renewable energy, mission critical, heavy commercial, and energy storage sectors. MMR holds the proud distinction of being the largest privately owned “Open Shop” contractor in the United States with over 30 branch offices including global locations in Canada, Qatar, and South America. For more information, please visit our website: Description:

MMR is seeking Project Engineer candidates with a degree in Construction Management or industry related equivalent. The responsibilities would include, but not limited to, the following:

• Assist with organization, planning, scheduling, and subcontractor scheduling of the project
• Handle day to day issues with meeting deadlines within budget
• Assist with developing job tracking systems including schedule, productivity, and cost
• Maintaining and updating tracking systems, schedules, cost reports
• Identifying and submitting RFI’s
• Participate in weekly client update meetings
• Prepare and submit weekly client update reports
• Preparing and submitting change orders
• Coordinating with site supervision to build work packages
• Prepare and submit client invoices
• Maintaining RFI log, change order log, invoice log, restraint log, drawing log, equipment log, material log
• Updating schedule of values and preparing client invoices
• Field material and equipment purchasing as required
• The above is not an exhaustive list of duties, and you will be expected to perform different tasks as needed to align with the overall business objectives of the organization

Required Skills and Qualifications:

• BS in Construction Management or related field
• At least 3-5 years relevant work experience
• Experience in electrical and instrumentation construction preferred
• Experience in industrial construction is preferred
• Must have knowledge in estimating, scheduling, and purchasing
• Ability to read and understand electrical drawing packages and specifications
• Working knowledge of MS Office software
• Experience with Primavera P6 preferred
• Ability to read and understand a CPM schedule and identify critical paths
• Ability to work independently, prioritize, organize, problem solve, and exercise good judgement with minimal supervision
• Strong organizational and interpersonal skills
• Able to work effectively under time pressure and/or deadline
• Excellent verbal and written communication skills
• Willingness to work flexible, varying hours, including evenings and weekends as needed
• Regular and reliable attendance at work

MMR Group, Inc. and its affiliated companies ("MMR") is an Equal Opportunity Employer and does not discriminate on the basis of race, color, national origin, religion, sex, age, veteran status, genetic information or any other legally protected class.

We are Toshiba. We have an unwavering drive to make and do things that lead to a better world.

At Toshiba, we commit to raising quality of life for people around the world, ensuring progress that is in harmony with our planet. Our core values include: Do the Right Thing, Look for a better way, Always consider the impact and Create Together.

Toshiba America Energy Systems Corporation (TAES) provides energy industry solutions – new equipment, retrofits, maintenance, outage planning and more – for current and future power generation needs in the Americas, including thermal, hydro and nuclear power plants.

Position Summary

We are seeking a Field Service Repair Technician to work out of our Milwaukee Service Center. The FS Repair Technician involves troubleshooting and repairing turbines, stators, and rotors in generators at customer locations. The candidate will learn to operate test equipment, diagnose issues, and determine necessary repairs. Responsibilities include assisting in testing components, using precision measuring instruments, and working under close supervision with inspections. The role also involves coordinating field service tooling and maintaining a professional image at job sites. The candidate should have a strong desire to advance to the Generator Technician position.

Essential Duties

• Help to construct and operate testing equipment to identify problems and determine necessary field service.
• Assist with paperwork, including test data, daily logs, job information, timesheets, and final reports.
• Learn procedures for rewinding, re-wedging, re-blocking, rebuilding stator bars/coils or cores, and repairing turbines and related components.
• Gain knowledge in winding insulation, curing, cooling stator bars/coils, and blocking bars/coils.
• Build and assemble slot wedges into stator core grooves.
• Acquire skills in stator core construction methods, including flooding, end winding, side bar packing, top and bottom filler, and resistance temperature detectors.
• Work with various resins and solvents.
• Become proficient with various hand and power tools.
• Learn to operate a portable milling machine and wire welding procedures.
• Help inventory and ensure supplies and equipment are in good working order before and after job site visits.
• Operate overhead cranes and lift trucks properly.
• Maintain a simplified tooling process by ensuring all responsible parties for a field project are aware of all tools sent out.
• Prepare purchase requisitions for tooling, materials, and chemicals, coordinating with various suppliers.
• Customize tooling designs or fabrication with various departments.
• Coordinate shipping and receiving of field service tooling to job sites.
• Inspect tools, including calibration and restocking, and follow procedures for testing electrical equipment.
• Coordinate the calibration of tooling and fabricate or modify as needed.
• Develop a mindset for service and courtesy.
• Perform other tasks requiring similar or lesser skills, usually of short duration to meet field service requirements.

Travel

• Up to 90%

Education and Required Experience

• High School Diploma or Equivalent.
• Trade or Technical Degree in a related field preferred.
• 1-3 years of experience with working knowledge of shop practices and basic electrical and mechanical fundamentals, gained through vocational training.
• Minimum 3 years previous experience in a similar or related role or 1-3 years’ experience in power generation field service, in lieu of vocational training.
• Cooperative work crew skills, as work is performed at field locations.
• Proficient in basic arithmetic operations, including decimals and fractions, and able to use formulas, blueprints, specifications, and tables.
• Skilled in using various precision measuring instruments. Familiarity with hand tools.
• Capable of operating overhead cranes and fork trucks.
• Proficient in Microsoft Office (Word, Excel, Outlook) and able to learn new software programs, such as Oracle for purchase requisitions.
• Previous experience in millwright, carpentry, welding, electrical, or HVAC roles preferred.
• Knowledgeable in Asbestos abatement and lead awareness training preferred.
• Possess a valid driver’s license for travel to customer sites.
• Must be able to pass requirements to gain unescorted access to a nuclear facility.
• Must be able to work without restriction throughout U.S, Canada, and Mexico.

Physical Requirements (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.)

The employee must be able to lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include Close vision, Distance vision and Ability to adjust focus. While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to finger, handle, or feel. The employee frequently is required to talk or hear. The employee is occasionally required to sit; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and taste or smell.

Work Environment

While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts, fumes, or airborne particles, and toxic or caustic chemicals. The employee is occasionally exposed to work in high, precarious places, and risk of shock. The employee is occasionally exposed to extreme heat, extreme cold and wet, humid conditions. The noise level in the work environment is frequently loud.

Additional Info

Toshiba employees enjoy a comprehensive compensation and benefit package including an annual bonus, a generous 401k match, health, and wellness programs as well as generous time off.

Toshiba is an Equal Opportunity Employer.

• The ability to perform the duties and responsibility of the position, with or without reasonable accommodations for disabilities.
• The ability to consistently lift, push or pull loads of up to fifty (50) pounds. (Unless nursing 50)
• Sufficient strength, mobility and stamina to make frequent location and position changes, assist with patient care, and perform other physical activities of average difficulty.
• Candidates whose disabilities make them unable to meet the requirements will still be considered fully qualified if they can perform the essential functions of the job with reasonable accommodations.
• May be exposed to infectious or contagious disease.
• May have to handle emergency situations.
• May be subject to irregular hours.
• May be required to wear protective equipment such as eye protection, face protection, masks, sterile/nonsterile gloves, isolation gowns.
• May be exposed to toxic/caustic/chemicals/detergents.
• Physical activities include continuous sitting, and occasional walking, standing, bending, squatting, climbing, kneeling and twisting.
• Activity Conditions (Occasionally, Frequently, Continuously):
  • Sitting- Occasionally
  • Walking- Frequently
  • Standing- Frequently
  • Bending-Frequently
  • Squatting - Occasionally
  • Climbing-Occasionally
  • Kneeling-Occasionally
  • Twisting-Occasionally

• Must be able to see with corrective eye wear.
• Must be able to hear clearly with assistance.

• Demonstrates clinical competencies necessary to perform and analyze a variety of laboratory test/procedures.
• Prepares reagents, standards, and controls according to prescribed procedures.
• Performs test analysis in a timely manner.
• Calibrates, standardizes and maintains instruments in accordance with established procedures.
• Researches and develops new procedures as assigned.
• Adheres to hospital, department, personnel policies, and procedures. Also adheres to laboratory and hospital safety policies and procedures.
• Exhibits computer skills needed for daily operation of the laboratory and hospital information systems,
• Demonstrates professionalism while functioning in the healthcare environment and recognizes the value of continuous professional growth and development.
• Assists in orienting and training new employees and students.
• Contributes to teamwork, quality improvement and productivity of the department.
• Performs other duties as assigned.

• Pathway I
  
  • Required
    
    • High School Diploma, GED, or equivalent
    • Bachelor's degree in Medical Technology or Medical (or Clinical) Laboratory Science
    • ASCP Certification Eligible in Medical Technology
  • Preferred
    
    • ASCP Certification
    • AMT Certification
• Pathway II
• Required
  
  • High School Diploma, GED, or equivalent
    
    • Bachelor's degree in Biological Science or related field (equivalency required for foreign education)
    • NAACLS Accredited Program in a Medical Lab Science field
    • ASCP Certification Eligible
  • Preferred
    
    • ASCP Certification
    • AMT Certification
• Pathway III
  
  • Required
    
    • High School Diploma, GED, or equivalent
    • Medical Laboratory Training from the U.S. Military
    • Bachelor's degree in Biological Science or related field (equivalency required for foreign education)
  • Preferred
    
    • ASCP Certification Eligible
    • ASCP Certification
    • AMT Certification
• Pathway IV
  
  • Required
    
    • High School Diploma, GED, or equivalent
    • Bachelor's degree in Biological Science or related field (equivalency required for foreign education)
    • ASCP Certification Eligible
    • ASCP, AMT, or equivalent certification

• Preferred
  
  • One or more years of experience in Blood Banking, Chemistry, Hematology, Microbiology, Immunology and Urinalysis/Body Fluids in the U.S., Canada or an accredited laboratory

• The ability to perform the duties and responsibility of the position, with or without reasonable accommodations for disabilities.
• The ability to consistently lift, push or pull loads of up to fifty (50) pounds. (Unless nursing 50)
• Sufficient strength, mobility and stamina to make frequent location and position changes, assist with patient care, and perform other physical activities of average difficulty.
• Candidates whose disabilities make them unable to meet the requirements will still be considered fully qualified if they can perform the essential functions of the job with reasonable accommodations.
• May be exposed to infectious or contagious disease.
• May have to handle emergency situations.
• May be subject to irregular hours.
• May be required to wear protective equipment such as eye protection, face protection, masks, sterile/nonsterile gloves, isolation gowns.
• May be exposed to toxic/caustic/chemicals/detergents.
• Physical activities include continuous sitting, and occasional walking, standing, bending, squatting, climbing, kneeling and twisting.
• Activity Conditions (Occasionally, Frequently, Continuously):
  • Sitting- Occasionally
  • Walking- Frequently
  • Standing- Frequently
  • Bending-Frequently
  • Squatting - Occasionally
  • Climbing-Occasionally
  • Kneeling-Occasionally
  • Twisting-Occasionally

• Must be able to see with corrective eye wear.
• Must be able to hear clearly with assistance.

• Demonstrates clinical competencies necessary to perform and analyze a variety of laboratory test/procedures.
• Prepares reagents, standards, and controls according to prescribed procedures.
• Performs test analysis in a timely manner.
• Calibrates, standardizes and maintains instruments in accordance with established procedures.
• Researches and develops new procedures as assigned.
• Adheres to hospital, department, personnel policies, and procedures. Also adheres to laboratory and hospital safety policies and procedures.
• Exhibits computer skills needed for daily operation of the laboratory and hospital information systems,
• Demonstrates professionalism while functioning in the healthcare environment and recognizes the value of continuous professional growth and development.
• Assists in orienting and training new employees and students.
• Contributes to teamwork, quality improvement and productivity of the department.
• Performs other duties as assigned.

• Pathway I
  
  • Required
    
    • High School Diploma, GED, or equivalent
    • Bachelor's degree in Medical Technology or Medical (or Clinical) Laboratory Science
    • ASCP Certification Eligible in Medical Technology
  • Preferred
    
    • ASCP Certification
    • AMT Certification
• Pathway II
• Required
  
  • High School Diploma, GED, or equivalent
    
    • Bachelor's degree in Biological Science or related field (equivalency required for foreign education)
    • NAACLS Accredited Program in a Medical Lab Science field
    • ASCP Certification Eligible
  • Preferred
    
    • ASCP Certification
    • AMT Certification
• Pathway III
  
  • Required
    
    • High School Diploma, GED, or equivalent
    • Medical Laboratory Training from the U.S. Military
    • Bachelor's degree in Biological Science or related field (equivalency required for foreign education)
  • Preferred
    
    • ASCP Certification Eligible
    • ASCP Certification
    • AMT Certification
• Pathway IV
  
  • Required
    
    • High School Diploma, GED, or equivalent
    • Bachelor's degree in Biological Science or related field (equivalency required for foreign education)
    • ASCP Certification Eligible
    • ASCP, AMT, or equivalent certification

• Preferred
  
  • One or more years of experience in Blood Banking, Chemistry, Hematology, Microbiology, Immunology and Urinalysis/Body Fluids in the U.S., Canada or an accredited laboratory

Distribution Technician

About Taurus Industrial Group (Taurus)

Taurus is a leading technical services contractor in the energy and industrial sector. Our business has over 60 years’ history and service excellence with an unwavering commitment to quality, safety, integrity, and respect. With operations spanning the Gulf Coast, Mid-west, Canada and Mexico, we offer an end-to-end service offering to our customers through Engineering, Infrastructure, Electrical & Instrumentation, Specialty Services divisions.

Position Outline

Due to the continued growth and expansion of our business, we are seeking qualified candidates for the position of Distribution Technician based in our Freeport, Texas office

The Distribution Technician will be assigned onsite at client location in Freeport, Texas.

Key Responsibilities include but are not limited to the following:

• Performs necessary work and tasks in inspecting, loading, and unloading tank wagons and rail cars; and performs necessary work and tasks to unload, fill, and load drums. 40% time
• Maintains current, detailed knowledge and understanding of all shipping equipment, chemicals that are loaded or unloaded, and contents of Shipping Procedures. 35% time
• Maintains and records all inventory changes and performs all necessary work and tasks for the blending of products. 10% time
• Records all loading and other necessary data and input information into the appropriate computer systems. 5% time
• Monitors safe handling, identification, storage, and removal of hazardous waste streams resulting from loading and production activities. 5% time
• Completes compliance and operating checklists and participates in the site’s efforts at pollution prevention and continuous improvement. 5% time
• Monitors efforts in the site to ensure compliance with all elements of Process Safety Management and the client Product Stewardship Initiatives. 5% time
• Essential functions require presence in the workplace on a regular basis and an ability to work extra hours if needed. If applicable, ability to work overtime may be needed to ensure required staffing capacity to meet daily production objectives.
• Work collaboratively with client and Taurus team members with different backgrounds and perspectives.
• Follows instructions and performs other duties as may be assigned by client distribution lead tech.
• Participates in Environmental, Health, & Safety initiatives as set forth by client and Taurus company.

Qualifications and Requirements:

• Strong business acumen and the ability to collaborate effectively with cross-functional teams.
• Outstanding communication and presentation skills, with the ability to clearly articulate complex financial concepts to non-financial stakeholders.
• High ethical standards, integrity, and a commitment to maintaining confidentiality.

Compensation & Benefits

Taurus offers a competitive compensation program that considers the applicant’s experience and capabilities, including access to medical benefits, vacation and 401k.

Job Title: Senior Nuclear Scheduler

Position Type: 12 Months Contract (Extension based on performance)

Location: Waterford, CT 06385 (Onsite)

Salary Range: $60/hr - $62/hr (USD) on W2 + Perdiem + Medical Insurance

Job ID#: #1549745

Job Summary (Responsibilities and Requirements):

• We are seeking a Senior Nuclear Scheduler to support major nuclear projects by developing, maintaining, and analyzing project schedules across engineering, procurement, construction, and commissioning phases.
• In this role, you will collaborate closely with EPC contractors and project teams to ensure project milestones are achieved while maintaining schedule integrity and project performance metrics.
• This position plays a critical role in master schedule development, schedule analysis, and project reporting, ensuring project timelines remain aligned with operational and regulatory requirements

Key Responsibilities:

• Develop, implement, and maintain the master project schedule in coordination with Engineering, Procurement, and Construction (EPC) teams.
• Integrate contractor schedule submissions into the owner master project schedule.
• Review and analyze critical path, milestones, constraints, and schedule dependencies.
• Perform schedule variance analysis using Primavera P6.
• Monitor contractor schedules and address issues impacting project milestones.
• Track schedule-related issues and communicate impacts to project management and leadership teams.
• Conduct site walkthroughs to verify contractor progress and validate weekly schedule updates.
• Provide schedule data to support change orders, bid comparisons, and project planning activities.
• Develop and maintain project metrics, including: Progress curves, Labor histograms, Milestone tracking, Schedule performance indicators
• Generate weekly and monthly schedule reports for project leadership and executive management.
• Train and mentor project staff on proper scheduling techniques and tools

Qualifications:

• Hands-on experience with Primavera P6 scheduling software.
• Experience with Excel, Microsoft Project, and Microsoft Word.
• Proven experience with: Resource-loaded schedules, Contractor baseline schedules, Time impact analysis, Earned value management reporting
• Experience converting schedules between tools (e.g., Primavera P6, P3, Microsoft Project).
• Strong knowledge of Critical Path Method (CPM) schedule analysis.
• Experience preparing maintenance or outage schedules (PM/CM) within nuclear or industrial environments.
• High School Diploma required.

Preferred Qualification:

• Bachelor’s degree in Engineering, Construction Management, or related field.
• Associate degree or technical program completion in: Mechanical, Electrical, Instrumentation & Controls, Nuclear Operations
• Experience working in nuclear operations, power generation, or heavy construction projects.
• Ability to read and interpret engineering and construction drawings.
• Working knowledge of project work scope sequencing and construction execution.

About Us:

Founded in 2009, IntelliPro stands as a global leader in talent acquisition and HR solutions. Our commitment to delivering unparalleled service to clients, fostering employee growth, and building enduring partnerships sets us apart. With a dynamic presence in the USA, China, Canada, Singapore, Philippines, UK, India, Netherlands, and Germany, we continue to lead the way in global talent solutions.

IntelliPro, a global leader in connecting individuals with rewarding employment opportunities, is dedicated to understanding your career aspirations. As an Equal Opportunity Employer, IntelliPro values diversity and does not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, disability, or any other legally protected group status. Moreover, our Inclusivity Commitment emphasizes embracing candidates of all abilities and ensures that our hiring and interview processes accommodate the needs of all applicants. Learn more about our commitment to diversity and inclusivity at : The pay offered to a successful candidate will be determined by various factors, including education, work experience, location, job responsibilities, certifications, and more. Additionally, IntelliPro provides a comprehensive benefits package, all subject to eligibility.

• Perform manufacturing activities in compliance with GMP and ISO 13485 quality standards.
• Prepare and formulate buffers, reagents, and solutions according to approved procedures and specifications.
• Follow Standard Operating Procedures (SOPs) and Work Instructions (WI) with strong attention to detail.
• Maintain excellent Good Documentation Practices (GDP), ensuring all records are accurate, complete, and audit?ready.
• The successful candidate must have a good mechanical background as they will be required to operate and maintain production equipment; experience with Biodot and/or Kinematic reel-to-reel systems is a strong plus.
• Support in-process checks, and quality control activities as required.
• Collaborate with Quality, R&D, and Engineering to troubleshoot processes and support continuous improvement initiatives.
• Uphold a controlled manufacturing environment per internal and regulatory expectations.

Qualifications

• 2+ years of experience in a GMP or ISO 13485 regulated manufacturing environment.
• Hands-on experience preparing buffers and handling chemical and biological materials.
• Strong understanding of GDP and controlled documentation processes.
• Experience with manufacturing instrumentation; Biodot reel-to-reel experience is highly desirable.
• Ability to follow detailed instructions, maintain consistency, and deliver high-quality work.
• Strong communication, organization, and problem?solving skills.
• Ability to work effectively in a fast-paced, team-oriented setting.

• Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week)
• Health Savings Account (HSA) (for employees working 20+ hours per week)
• Life & Disability Insurance (for employees working 20+ hours per week)
• MetLife Voluntary Benefits
• Employee Assistance Program (EAP)
• 401K Retirement Savings Plan
• Direct Deposit & weekly epayroll
• Referral Bonus Programs
• Certification and training opportunities

Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply.

Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Visit to contact us if you are an individual with a disability and require accommodation in the application process.

For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment.

It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh’s hiring clients’ preferences. To learn more about Yoh’s privacy practices, please see our Candidate Privacy Notice: