Gantry Crane Operator Training Jobs in Usa
12,901 positions found
Job Description
We are seeking a skilled and safety-focused Crane Operator to join our team. The ideal candidate will be responsible for operating various types of cranes to lift, move, and position heavy materials safely and efficiently on construction and industrial sites.
Responsibilities:
* Operate mobile cranes to lift, move, position, and place materials and equipment.
* Inspect cranes and rigging equipment daily before operation to ensure safety and proper functioning.
* Follow load charts, signals, and site plans to ensure safe and accurate lifts.
* Communicate effectively with signalers, riggers, and ground crews.
* Perform routine maintenance and report any mechanical issues or safety hazards.
* Adhere to all OSHA, site, and company safety regulations.
* Maintain accurate logs of crane operations, loads, and inspections.
* Assist with site setup, teardown, and equipment mobilization as needed.
Qualifications:
* High school diploma or equivalent (GED).
* Valid NCCCO (National Commission for the Certification of Crane Operators) certification or equivalent required.
* Minimum of 2 years of experience operating cranes (mobile, tower, or overhead).
* Knowledge of crane load capacities, rigging, and signaling procedures.
* Strong attention to detail and safety awareness.
* Ability to read and interpret blueprints and lift plans.
* Physical ability to work outdoors in varying conditions.
* CDL (Commercial Driver's License) preferred for mobile crane operators.
Must have active CDL.
Must be certified in Arizona to operate cranes.
Must be able to sit/stand and/or drive for long periods of time.
Must be able to provide or obtain medical examiner certification prior to employment.
Need to be able to commute around Tucson and surrounding areas with ease.
Prior experience operation commercial vehicles and/or long trailer beds is preferred.
This position is accountable for supporting field operations at marine project locations for Orion. Incumbents are responsible for the operation of cranes and other hoisting equipment in the construction or repair of marine terminals and dock facilities. Typically, they will work closely with the Project Superintendent, Barge Foreman, Welders, Boat Captain, Laborers, and other skilled or semi-skilled crafts persons.
The incumbent must support the guiding beliefs and core values of Orion which are centered on Safety, Quality, Delivery, and Teamwork, most importantly with each built upon the all-important foundation of Integrity.
SPECIFIC RESPONSIBILITIES
- Works as assigned by the Barge Foreman to ensure the successful completion of on-going or new marine construction projects.
- Assists in unloading and assembling of crane or other hoisting equipment to be used in marine construction activities.
- Utilizes basic skills as a hook operator in swinging rig, raising and lowering crane boom, raising and lowering load lines on the crane.
- Operates a hydraulic rubber tire or track crane equipped with a multiple part pick-up or single line hoist suspended from a boom by a cable.
- Maneuvers and positions loads over designated areas in a smooth, safe manner.
- Moves hand levers and depresses pedals to rotate chassis over lift load points.
- Utilizes load charts to determine load and radius capabilities of the crane.
- Assists in the installation of boom and hoisting cables on the hoisting equipment.
- Performs maintenance duties such as cleaning, greasing, oiling, and fueling of assigned equipment.
- Performs daily safety inspection of crane and recognizes possible problem areas such as worn cables, worn bands on hoisting mechanisms, broken gears, housing, etc.
- Ensures that crane boom is properly secured upon the work barge prior to moving from one work location to another and otherwise demonstrates safe work practices in all aspects of crane operation.
- Works closely with Barge Foreman, Welders, Helpers, Laborers, and other skilled craft persons to complete current projects in a safe, efficient, and timely manner.
- Participates in Safety and Environmental initiatives that will contribute to compliance with State/Federal regulations and improve existing Company programs.
EMPLOYEE SAFETY AND COMPLIANCE
- Responsible and accountable for incumbent's own personal safety.
- Responsible and accountable for the safety of all co-workers and any others incumbent comes in contact with.
- Authorized and obligated to stop work on any task or series of tasks whenever an unsafe condition or situation is anticipated or is observed.
- Complies with all applicable laws, regulations, and Company policies and procedures and is subject to appropriate disciplinary action (including dismissal) for failure to do so.
- Reports any and all violations of applicable laws, regulations, or Company policies and procedures promptly and is subject to appropriate disciplinary action (including dismissal) for failure to do so.
- Performs other related administrative and technical duties as may be assigned or requested by immediate supervision (such as certification training, safety training, procedure review, etc.).
- All employees, current and former, must maintain confidentiality by not disclosing to others any confidential, proprietary, or trade secret information belonging to the Company.
POSITION REQUIREMENTS
A minimum of two (2) years crane operations experience on land and on barges or any equivalent combination of experience and training which provides the necessary crane operations skills, knowledge, and abilities is required. The incumbent must:
- Understand the basic functions and operations of various types of pile hammers -- diesel, air, hydraulic, and drop hammers.
- Be able to read, understand, and use crane load charts to determine load and radius capabilities of cranes.
- Have general knowledge of construction rigging -- use of slings, cable chokers, spreader bars, multi-part load blocks, etc.
- Be capable of successfully passing a crane operations certification test.
The Company expects and requires incumbent and each of its other employees to observe and fulfill the above and all other safety responsibilities and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action up to and including termination of employment.
PHYSICAL/MENTAL REQUIREMENTS
The incumbent must be able to perform the essential functions of the job with or without reasonable workplace accommodation.
The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes hard hat, safety glasses, respirators, ear plugs, steel-toed shoes, or other protective equipment as required by the work performed and location the work is being done.
This individual must also have the ability to identify critical issues and formulate action plans with all levels of management, including corporate.
The incumbent must possess the ability to remain calm during emergencies and respond appropriately as dictated by the circumstance of the incident and as directed by the Safety Representative or other management personnel. Must be capable of evacuating the work area in a timely manner should an emergency situation arise.
In addition, Crane Operators must also be capable of:
- Walking, stepping, climbing, or otherwise moving from one location on the job site to another, which normally involves physically getting onto and off of work barges, boats, vessels, or dock facilities of varying heights and access parameters.
- Visually seeing crane operations well (either naturally or with corrective lenses).
- Standing, stooping, kneeling, squatting, climbing, or sitting for long periods of time.
- Performing repetitive movements by feet, shoulders, arms, wrists, hands, and back in performance of work.
- Climbing vertical ladders to heights of 40'-50'.
- Working in confined spaces and at elevated heights.
- Lifting objects up to 50 lbs. as required.
- Carrying objects up to 50 lbs. as required.
- Adapting to extreme temperature changes.
- Adapting to outdoor conditions and prolonged exposure.
- Remaining calm during emergencies and responding appropriately as dictated by the circumstance of the incident.
Compensation & Benefits:
An excellent compensation and benefits package is offered. Benefit plans include:
- Medical, including Prescription Drugs
- Dental
- Vision
- Life and AD&D Insurance
- Short Term and Long-term Disability Insurance
- Employee Assistance Plan
- 401(k) Retirement Plan
- Paid Time Off for Vacation, Sick, Holidays, Jury Duty and Bereavement Leave
- Pre-Tax Health and Dependent Care Flexible Spending Accounts
- Career Growth & Development
Candidate Response:
Qualified applicants should apply through the company career page: that do not meet the minimum requirements will not be considered. The Company is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, gender identity and sexual orientation), age, national origin, genetic information, disability, veteran status or any other category protected by law.
Position Purpose:
The CDL Driver & Crane Operator at SRS Building Products ensures safe, efficient transport and delivery of building materials to job sites. Responsibilities include operating trucks, cranes, and forklifts; performing DOT-compliant inspections; coordinating with rooftop loaders; and maintaining accurate documentation. The role also involves customer interaction and warehouse support to uphold service and safety standards.
Key Responsibilities:
Safely deliver building materials within a 200-mile radius, following DOT regulations and company policies.
Perform pre- and post-trip inspections, operate cranes and forklifts, and coordinate with rooftop loaders to ensure accurate, damage-free deliveries.
Verify inventory, document deliveries with photos, and assess job sites for safety risks.
Provide excellent on-site customer service and support warehouse and yard maintenance.
Direct Manager Direct Reports:
Reports directly to the Assistant Branch Manger or Operations Manager.
Travel Requirements:
This role requires frequent travel within a 200-mile radius for material deliveries, with all trips starting and ending at the home branchensuring drivers return home daily with no overnight stays.
Physical Requirements:
This physically demanding role requires regularly lifting up to 100 pounds and working outdoors in varying weather.
Candidates must safely operate commercial vehicles and cranes, navigate ladders and confined spaces, and tolerate high noise levels.
Routine tasks include driving, material handling, and adhering to all safety regulations.
Reasonable accommodations are available per ADA, and the company is committed to equal opportunity and an inclusive workplace.
Working Conditions:
This fast-paced, field-based role focuses on safe, precise, and on-time delivery of building materials within a 200-mile radius. Drivers return home daily with no overnight stays. Success requires strong organization, communication, and customer interaction to meet delivery deadlines and ensure satisfaction at varied job sites.
Minimum Qualifications:
Valid CDL drivers license
1-2 years of relevant work experience
Crane operator certification
Proficiency in performing routine maintenance and safety checks
Knowledge of basic mechanical systems
Licensing & Certification:
Valid Class A or B CDL with air brakes endorsement
Current DOT medical certificate
FMCSA Clearinghouse registration
Technical Proficiencies:
Experience operating conveyor belts, knuckle booms, or crane-equipped trucks
Forklift operation experience; certification preferred
Knowledge of DOT regulations and OSHA safety standards
Experience:
Commercial driving experience preferred
Background in distribution environments beneficial
Experience with material handling and delivery logistics is a plus
Skills:
Ability to lift and move up to 100 lbs. repeatedly
Proficient in English (reading, writing, and verbal communication)
Skilled in pre- and post-trip vehicle inspections
Capable of conducting job site inspections and reporting conditions
Safety & Compliance
Strong adherence to safety protocols
Clean driving record (no hit-and-run, DWI, or DUI in the past 36 months)
Must pass background check and drug screening
Other Requirements:
Minimum age: 18 (21 if crossing state lines or transporting hazardous materials)
Must be legally authorized to work in the U.S. and pass E-Verify
Physical Requirements
Lift/move up to 100 lbs.
Work in various weather and noisy environments
Climb ladders and work at heights
Preferred Qualifications:
Qualifications & Experience
35 years of truck driving experience
Professional crane operation experience
Strong time and route management skills
Equipment Proficiency
Skilled in operating boom cranes, piggyback forklifts, and conveyor systems
Forklift certification preferred
Safety & Compliance
Deep knowledge of DOT and OSHA regulations
Proven commitment to safety standards and practices
Customer Service
Effective on-site communication and collaboration
Skilled in strategic material placement to meet customer needs
Problem Solving & Logistics
Quick resolution of delivery challenges
Efficient route planning to optimize time and fuel
Teamwork
Working collaboratively with teams
Inventory & Technology
Proficient in digital inventory management and order verification
Committed to continuous learning and skill enhancement
Minimum Education:
High school diploma or equivalent.
Preferred Education:
Vocational or technical training in heavy machinery operation.
Minimum Years Of Work Experience:
12 years of experience preferred. While not strictly required, prior commercial driving experience is strongly recommended. Experience in distribution and forklift operation is a plus.
Certifications:
Commercial Drivers License (CDL):
Valid Class A or Class B CDL with air brakes endorsement.
NCCCO Crane Certification:
Specifically, ABC/ABL certification is required.
Truck Crane Operation Certification:
Preferred but not mandatory.
Telescopic Boom - Fixed Cab Certification:
Preferred but not mandatory.
Boom Truck - Fixed Cab Certification:
Preferred but not mandatory.
Articulating Boom Crane Certification:
Preferred but not mandatory.
Competencies:
Leadership & Collaboration
Able to lead and manage teams effectively
Adaptable to changing situations
Works well in team environments
Encourages innovation and communicates clearly
Customer-focused and results-driven
Skilled in conflict resolution
Safety & Compliance
Strict adherence to DOT and OSHA regulations
Maintains a strong safety record and promotes safe practices
Technical Skills
Proficient in operating commercial vehicles, cranes, forklifts, and conveyor systems
Accurate in inventory checks and site inspections
Communication & Customer Service
Clear, courteous communication with customers and team members
Focused on customer satisfaction and precise material placement
Problem Solving
Resolves delivery and site issues quickly and effectively
Physical & Environmental Readiness
Capable of lifting up to 100 lbs and working in varied conditions
Organization & Logistics
Efficient in planning routes and managing deliveries
Supports branch operations through task prioritization
Job Location:
If you are an individual with a disability or a disabled veteran and require a reasonable accommodation in applying for any posted position, please contact Human Resources at US: 855.556.3221, or by email to: with the nature of your accommodation request and include the Business name, location and title of the job opening. Please allow one (1) business day for a reply.
All employment offers are contingent upon successful completion of a background check and drug screen, as permitted by law.
Competitive weekly/bi-weekly pay, discretionary bonuses, 401(k) with company match, Employee Stock Purchase Plan, paid time off (vacation, sick, volunteer, holidays, birthday, floating), medical/dental/vision, flexible spending accounts, company-paid life and short-term disability, plus optional long-term disability, and additional life insurance.
Benefits
- Competitive salaries for all team members paid weekly
- 401(k) Retirement Plan with company matching
- Employee Stock Purchase Program
- Paid Vacation, Sick Time, Volunteer Day, Holidays, Birthday, and Floating Holidays
- Paid Parental Leave, Adoption Assistance Program
- Medical, Dental and Vision Benefits
- Flexible and Dependent Care Spending Accounts
- Company paid Life insurance and Short-Term Disability
- Additional Life Insurance and Long-Term Disability also offered
- Mental, Physical and Emotional Well-Being Programs for Employees and Families
- Wellness Program and Safety Program with Bonuses for our Drivers
- Employee Referral Bonus Program
Required: NCCCO
Position Overview:
We are currently looking for a talented Taxi Crane Operator to operate our fleet of taxi cranes. The successful candidate will be responsible for safely and efficiently operating the crane to lift, move, and position materials and equipment at job sites. This position offers the opportunity to work with state-of-the-art equipment and be a part of a dynamic team.
Responsibilities:
- Operate taxi cranes to lift and move materials and equipment on construction sites, industrial facilities, and other locations as needed.
- Interpret load charts and work orders to determine the appropriate crane configuration and lifting procedures for each job.
- Conduct pre-operational inspections of the crane to ensure it is in safe working condition and report any defects or maintenance issues to the appropriate personnel.
- Safely rig loads and attach them to the crane using appropriate rigging techniques and equipment.
- Communicate effectively with ground personnel using hand signals, radio communication, or other means to coordinate crane movements.
- Adhere to all safety regulations and procedures to prevent accidents, injuries, and damage to property.
- Complete required paperwork and documentation accurately and in a timely manner.
- Perform routine maintenance tasks on the crane, such as lubrication and minor repairs, to keep it in optimal working condition.
Requirements:
- High school diploma or equivalent.
- Must have valid NCCCO certification.
- Must have a valid CDL for at least 3 years.
- Must have a clean driving record.
- Minimum of 1-3 years of experience operating taxi cranes or similar equipment.
- Strong understanding of crane operation principles, load capacities, and rigging techniques.
- Proficient in industry rigging standards and practices (ASME, OSHA), adept at calculating sling angles and tensions, and skilled in determining center of gravity both mathematically and in the field through comprehensive training and hands-on experience with various materials and weights.
- Must demonstrate expertise in selecting appropriate rigging capacities and pick points to safely support the load.
- Proficiency in creating and executing critical lift plans in the field.
- Capable of accurately adhering to critical lift plans and procedures crafted by the Engineering team.
- Excellent hand-eye coordination and spatial awareness.
- Ability to work effectively as part of a team and communicate clearly with others.
- Willingness to work outdoors in various weather conditions and at heights.
- Ability to lift and move heavy objects and work in confined spaces as needed.
- Good communication and interpersonal skills, with the ability to work well in a team environment.
- Attention to detail and a commitment to safety at all times.
- Flexibility to work evenings, weekends, and overtime as required by project demands.
- Must be willing to travel out of state for extended periods as required by project demands.
- Must pass fit for duty assessment, drug test, and background check.
Benefits:
- Competitive pay commensurate with experience.
- Comprehensive benefits package, including medical, dental, and vision coverage.
- 401(k) retirement savings plan with employer match.
- Opportunities for professional development and future advancement within the company.
Since 1932, A.H. Beck Foundation Co., Inc. has set the standard as a premier deep foundation, ground improvement, and earth retention contractor. We're not just builders; we are innovators, engineers, and craftsmen who take pride in our work. At the heart of our continued success are our Crane Operators, professionals who personify precision, safety, and skill.
We are now inviting skilled and safety-conscious Crane Operators to join our esteemed team. If you have a passion for operating advanced construction machinery and thrive in a dynamic work environment, you are the candidate we are seeking. By becoming part of our legacy, you will not only operate cranes but also contribute to the art and science of construction, shaping landscapes and communities.
Job Summary:
As a Crane Operator with A.H. Beck Foundation Co., Inc., your primary responsibility will be more than just the safe and efficient operation of various types of cranes. You'll be an essential player on our construction sites, moving heavy equipment and materials, and ensuring that our projects reflect our commitment to excellence. In addition, you will collaborate with other crew members, contributing to concrete placement, shaft excavation, and rebar cage setting, and embodying the collaborative spirit that defines our company.
Key Responsibilities:
- Safely operate cranes and adhere to strict safety protocols and practices.
- Assist the crew with concrete placement, shaft excavation, and rebar cage setting when not operating the crane.
- Lift materials weighing up to 50 lbs. and navigate uneven surfaces with ease.
- Work effectively in both hot and cold weather conditions, ensuring project continuity.
- Collaborate with the mechanic to conduct repairs and preventative maintenance on the crane.
- Demonstrate physical flexibility by lifting arms above shoulder level and bending, reaching, turning, and twisting repeatedly in confined spaces.
Requirements:
- Valid certification to operate a crane, such as NCCCO.
- Valid DOT Medical Certification.
- Ability to climb up and down the equipment being operated safely.
- Experience working on construction sites and handling heavy machinery.
- Available for flexible scheduling, including overtime and weekend shifts.
Benefits: We offer a comprehensive benefits package, including:
- 401(k) retirement plan.
- Dental, health, vision, and life insurance.
- Employer paid short-term and long-term disability benefits.
- Paid time off to support work-life balance.
- All employees assigned to a job site greater than 75 miles from their home are eligible to receive per diem.
Schedule:
- Full-time position with flexible scheduling options.
- Shifts may vary between 8 to 10 hours, Monday to Friday, with occasional overtime and weekend availability.
Work Location:
You will work at multiple construction jobsites, contributing to a diverse range of projects that showcase your expertise. The nature of our business is such that employees will be required to work on out-of-town jobs.
Join our . Beck Foundation Co., Inc. and be part of a company with a rich history of excellence in the deep foundation industry. Embrace new challenges, grow your career, and enjoy a supportive work environment.
We are an equal opportunity employer and value diversity in our workforce. Applicants of all backgrounds are encouraged to apply.
McLean is currently seeking experienced crane operators to join our team in the Chesapeake, VA and Baltimore, MD regions. Selected applicants will work on a wide range of equipment from marine cranes, crawler cranes, and hydraulic cranes. Ideal candidates will possess the ability to safely and accurately operator and maintain assigned crane(s).
Candidates should have 5+ years of experience driving pile with different hammers, and experience using clamshell bucket. Current NCCCO LBC certification is required, and Friction crane operating experience is a plus!
Essential Skills
- Observe load rigging or hookup, determines safety of loads, operate within parameters of load chart.
- Places loads within fine tolerances, operates with skill using pile hammers, extractors and various bucket types.
- Manipulate or depress crane controls such as pedals, levers, and buttons, to regulate speed and direction of crane and hoist movement.
- Operate in a smooth and controlled manner.
- Use hoisting attachments such as hook, sling, electromagnet, or bucket as load requires.
- Clean and maintain crane and hoisting mechanism.
- May be called upon to operator additional construction equipment as needed.To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge,skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Qualifications
- High school diploma/GED/Trade School preferred
- Five (5) years relevant experience and /or training; or equivalent combination of education and experience.
- NCCCO Crane Certification.
- Ability to pass DOT Physical screenings.
This is not a complete job description; one will be provided to qualified candidates who apply. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Benefits
- Competitive Salary
- ESOP
- Career Advancement Opportunities
- Health Insurance
- Dental Insurance
- Retirement Plan
- PTO
Why McLean
Maximize your Career Potential by taking advantage of the many opportunities available at McLean Contracting Company. Whether you have worked in the industry for years or you are just getting started, you will find our Company provides opportunities for growth and advancement. McLean's rich history includes countless success stories and all of them involve the hard work and dedication of our best asset, our employees! We hope that you will consider joining our team
EOE/M/F/VETS/Disabilities
About Modular Mission Critical
ModularMission Critical is the manufacturing campus for M.C. Dean's complex, modular product line for datacenters and critical infrastructure. Located just north of Richmond, VA, this site is growing fast serving customers worldwide. Important openings include assemblers for our production lines and engineers and designers for products and continuous improvement. Join M.C. Dean's more than 9,000 employees around the world making an impact through innovations in power and technology.
Why Join Us?
Our people are passionate about innovation that improves lives and drives impactful change. Guided by our core values-agility, expertise, and trust-we foster a collaborative and forward-thinking work environment for employees to build long-term careers.
We are looking for an experienced, detail-oriented Crane Operator who will operate various types of cranes to lift material, objects or personnel into place; drive cranes to work site and properly set up per the manufacturer's operators manual and company rules regarding cribbing/matting, cribbing blocks or mats as required to perform job requirements of customer. This individual will also direct activities of oilers, truck drivers or helpers in setting up and knocking down the equipment. placing cribbing blocks and/or pads. They may operate cranes according to signals from the oiler or helper may bolt, pin boom sections together to modify boom lengths. This position is a member of a team and will require work as a ground crew depending on the task being performed. The ideal candidate will be involved in all scopes of modular delivery.
Responsibilities
- Responsible for operating a mobile crane to lift, move, position, and reposition loads.
- The Operator will be required to unload crane accessories from trailers or support vehicles.
- Perform pre- and post-trip inspections along with daily and monthly equipment inspections.
- Follow appropriate safety procedures and maintain logs of vehicle repair status and working hours (FMCSA).
- Operator typically works under direct supervision and is expected to work long hours with frequent sitting, standing, moving, and climbing.
- The Operator is subject to possible exposure to extreme year-round outdoor environmental conditions and may also be subject to working weekends and holidays.
- Perform routine maintenance
- Carry tools for running repairs
Qualifications
- High school diploma or GED with 5+ years of experience.
- Knowledgeable in OSHA Regulations and ANSI standards in crane operations
- Ability to pass a drug test and background check.
- Proficiency with oral and written communication skills, as well as technical and functional skills
- CDL Class A license, NCCCO, TSS, TLL, LBC are preferred, but not required
Abilities:
- The position requires the ability to lift, carry, and move objects weighing up to [50 pounds] on a regular basis. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials. Proper lifting techniques and safety protocols must be followed to ensure personal and team safety.
- Relocates a 12 foot stepladder without assistance.
- Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.
- Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.
- Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.
- May use a standard ladder without exceeding the weight limit while carrying tools.
- Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
- Apply general rules to specific problems to produce answers that make sense.
- Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).
- See details at close range (within a few feet of the observer).
- Listen to and understand information and ideas presented through spoken words and sentences.
REQUIREMENTS AND PREFERENCES
The Broward County Board of County Commissioners is seeking qualified candidates for Construction Project Manager-Crane Section at Port Everglades.
The Construction Project Manager in the Operations Division - Crane Section is responsible for performing advanced professional and administrative work in the design and management of crane improvement projects for the Port Everglades Department.
THIS JOB ANNOUNCEMENT WILL REMAIN OPEN UNTIL SUFFICIENT NUMBER OF APPLICATIONS ARE RECEIVED AND MAY CLOSE AT ANYTIME.
General Description
Performs advanced professional and administrative work in the design and management of construction projects for the County.
Works independently, under limited supervision, reporting major activities through periodic meetings.
Minimum Education and Experience RequirementsRequires an associate degree from an accredited college or university with major coursework in architecture, civil engineering, construction management or closely related field.
Requires Eight (8) years of professional engineering and/or construction management experience relevant to the area of assignment or closely related experience.
Special Certifications and LicensesPossess and maintain a valid Florida Class E Driver's License based on area of assignment.
Ability to secure and maintain a Transportation Worker Identification card (TWIC) within 60 days of employment and for the duration of employment.
Ability to secure and maintain a valid Seaport Business Purpose Credential for the duration of employment.Preferences
- Bachelor's or master's Degree from an accredited college or university with major coursework in Architecture, Civil Engineering, Construction Management, or closely related field
- Project Management Professional (PMP) certification
- LEED certification
- Licensed Engineer in the State of Florida, or Licensed General or Building Contractor in the State of Florida
- 1+ years experience using AutoCAD
- 1+ years experience using Building Information Modeling (BIM)
- 5+ years of experience in governmental accounting and procurement processes
- 3+ years of experience gantry crane maintenance
SCOPE OF WORK
Duties and Responsibilities
The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.
Develop and prepare engineering plans and designs for various crane improvement projects; estimate quantities and costs of such projects.
Assists consultants in the development of construction projects; issues work orders to consultants, surveyors and testing labs; reviews consultant's plans and specifications at various stages of development for conformance to design standards, completeness and accuracy; monitors consultant's cost estimates and verifies consultant's invoices and recommends payment.
Coordinates bid advertisements; schedules and assists in conducting pre-bid conferences; assists in evaluating bids and making recommendations for award of contract.
Schedules and assists in conducting pre-bid construction meetings with consultants, contractors and subcontractors; issues Notice to Proceed to contractors; reviews field inspection reports.
Assists in the preparation of schedules and monitors construction progress; assists in the preparation of change orders; maintains records of consultant's payments.
Assists in the inspection of projects for substantial completion and prepares punch list of any deficiencies; arranges for correction of defects by contractor during warranty period and conducts inspection at end of warranty period to ensure correction of defects.
Prepares required paperwork for capitalizing and closing the project; performs special investigations, sites analyses and feasibility studies as required and submits technical and management reports.
Meets with consultants, contractors, utility organizations, city, state, federal agencies, civic associations, business and community leaders, property owners and attorneys; assists with the preparation of the budget for capital expenditures.
Makes recommendations regarding hiring, discipline and promotions of subordinates; authorizes leave; evaluates employee performance.
Performs related work as assigned.
Competencies- Financial Acumen:Interprets and applies key financial indicators to make better business decisions. Determines and estimates the main direct and indirect costs; makes generally appropriate decisions regarding expenditures. Studies financial and quantitative information; uses data to improve performance.
- Manages Complexity:Makes sense of complex, high quantity, and sometimes contradictory information to effectively solve problems. Consistently looks at complex issues from many angles; obtains a rich and deep understanding; swiftly cuts to the core issue; skillfully separates root causes from symptoms.
- Decision Quality:Makes good and timely decisions that keep the organization moving forward. Knows when to act independently and when to escalate issues. Integrates various inputs, decision criteria, and trade-offs to make effective decisions. Typically makes good independent decisions.
- Balances Stakeholders:Anticipates and balances the needs of multiple stakeholders. Ensures that own efforts meet the needs and requirements of internal and external stakeholders. Works to identify all relevant issues and satisfy the interests of multiple stakeholders during the decision-making process.
- Plans and Aligns:Plans and prioritizes work to meet commitments aligned with organizational goals. Stays focused on plans and improvises in response to changes, including risks and contingencies. Aligns own team's work with other workgroups'. Looks ahead to determine and obtain needed resources to complete plans.
- Ensures Accountability:Holds self and others accountable to meet commitments. Accepts responsibility for own work, both successes and failures. Handles fair share and does not make excuses for problems. Usually meets commitments to others.
- Drives Results:Consistently achieves results, even under tough circumstances. Holds self to high standards of performance; sets some challenging goals; wants to achieve meaningful results; pursues initiatives/efforts to successful completion and closure. Focuses on key goals, even during setbacks and obstacles.
- Communicates Effectively:Develops and delivers multi-mode communications that convey a clear understanding of the unique needs of different audiences. Tailors communication content and style to the needs of others. Pays attention to others' input and perspectives, asks questions, and summarizes to confirm understanding.
- Situational Adaptability:Adapts approach and demeanor in real time to match the shifting demands of different situations. Sees even subtle cues to adapt; deploys a wide range of behaviors to stay effective. Exemplifies flexibility and resourcefulness; responds deftly to a variety of challenges and situations.
WORK ENVIRONMENT
Physical Demands
Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.
Performs light work that involves walking or standing most of the time and involves exerting up to 20 pounds of force on a regular and recurring basis, or skill, adeptness and speed in the use of fingers, hands or limbs on repetitive operation of electronic office equipment or tools within moderate tolerances or limits of accuracy.
Unavoidable Hazards (Work Environment)Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.
Involves routine and frequent exposure to traffic; moving machinery.
SPECIAL INFORMATION
County Core Values
All Broward County employees strive to demonstrate the County's four core behavioral competencies.
- Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
- Customer focus: Building strong customer relationships and delivering customer-centric solutions.
- Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
- Values differences: Recognizing the value that different perspectives and cultures bring to an organization.
Copyright 2025 Korn Ferry. ALL RIGHTS RESERVED
Americans with Disabilities Act (ADA) ComplianceBroward County is an Equal Opportunity Employer committed to inclusion. Broward County is committed to providing equal opportunity and reasonable accommodations to qualified persons with disabilities. We support the hiring of people with disabilities; therefore, if you require assistance due to a disability, please contact the Professional Standards Section in advance at or email to make an accommodation request.
County-wide Emergency ResponsibilitiesNote: During emergency conditions, all County employees are automatically considered emergency service workers. County employees are subject to being called to work in the event of a disaster, such as a hurricane, or other emergency situation and are expected to perform emergency service duties, as assigned.
County-wide Employee ResponsibilitiesAll Broward County employees must serve the public and fellow employees with honesty and integrity in full accord with the letter and spirit of Broward County's Employee Code of Ethics, gift, and conflict of interest policies.
All Broward County employees must establish and maintain effective working relationships with the general public, co-workers, elected and appointed officials and members of diverse cultural and linguistic backgrounds, regardless of race, color, religion, sex, national origin, age, disability, marital status, political affiliation, familial status, sexual orientation, pregnancy, or gender identity and expression.
Position Purpose:
The CDL Driver & Crane Operator at SRS Building Products ensures safe, efficient transport and delivery of building materials to job sites. Responsibilities include operating trucks, cranes, and forklifts; performing DOT-compliant inspections; coordinating with rooftop loaders; and maintaining accurate documentation. The role also involves customer interaction and warehouse support to uphold service and safety standards.
Key Responsibilities:
Safely deliver building materials within a 200-mile radius, following DOT regulations and company policies.
Perform pre- and post-trip inspections, operate cranes and forklifts, and coordinate with rooftop loaders to ensure accurate, damage-free deliveries.
Verify inventory, document deliveries with photos, and assess job sites for safety risks.
Provide excellent on-site customer service and support warehouse and yard maintenance.
Direct Manager Direct Reports:
Reports directly to the Assistant Branch Manager or Operations Manager.
Travel Requirements:
This role requires frequent travel within a 200-mile radius for material deliveries, with all trips starting and ending at the home branchensuring drivers return home daily with no overnight stays.
Physical Requirements:
This physically demanding role requires regularly lifting up to 100 pounds and working outdoors in varying weather.
Candidates must safely operate commercial vehicles and cranes, navigate ladders and confined spaces, and tolerate high noise levels.
Routine tasks include driving, material handling, and adhering to all safety regulations.
Climb ladders and work at heights
Reasonable accommodations are available per ADA, and the company is committed to equal opportunity and an inclusive workplace.
Working Conditions:
This fast-paced, field-based role focuses on safe, precise, and on-time delivery of building materials within a 200-mile radius. Drivers return home daily with no overnight stays. Success requires strong organization, communication, and customer interaction to meet delivery deadlines and ensure satisfaction at varied job sites.
Minimum Qualifications:
Valid CDL drivers license with air brakes endorsement
Proficiency in performing routine maintenance and safety checks
Knowledge of basic mechanical systems
Experience operating conveyor belts, knuckle booms, or crane-equipped trucks
Forklift operation experience; certification preferred
Knowledge of DOT regulations and OSHA safety standards
Proficient in English (reading, writing, and verbal communication)
Skilled in pre- and post-trip vehicle inspections
Capable of conducting job site inspections and reporting conditions
Strong adherence to safety protocols
Clean driving record (no hit-and-run, DWI, or DUI in the past 36 months)
Must pass background check and drug screening
Preferred Qualifications:
Professional crane operation experience
Strong time and route management skills
Skilled in operating boom cranes, piggyback forklifts, and conveyor systems
Forklift certification preferred
Deep knowledge of DOT and OSHA regulations
Proven commitment to safety standards and practices
Effective on-site communication and collaboration
Skilled in strategic material placement to meet customer needs
Quick resolution of delivery challenges
Efficient route planning to optimize time and fuel
Working collaboratively with teams
Proficient in digital inventory management and order verification
Committed to continuous learning and skill enhancement
Minimum Education:
High school diploma or equivalent.
Preferred Education:
Vocational or technical training in heavy machinery operation.
Minimum Years Of Work Experience:
12 years of experience preferred. While not strictly required, prior commercial driving experience is strongly recommended. Experience in distribution and forklift operation is a plus.
Certifications:
Current DOT medical certificate
NCCCO Crane Certification: ABC/ABL certification is required.
Truck Crane Operation Certification: Preferred but not mandatory.
Telescopic Boom - Fixed Cab Certification: Preferred but not mandatory.
Boom Truck - Fixed Cab Certification: Preferred but not mandatory.
Articulating Boom Crane Certification: Preferred but not mandatory.
Competencies:
Leadership & Collaboration
Able to lead and manage teams effectively
Adaptable to changing situations
Works well in team environments
Encourages innovation and communicates clearly
Customer-focused and results-driven
Skilled in conflict resolution
Maintains a strong safety record and promotes safe practices
Proficient in operating commercial vehicles, cranes, forklifts, and conveyor systems
Accurate in inventory checks and site inspections
Clear, courteous communication with customers and team members
Focused on customer satisfaction and precise material placement
Resolves delivery and site issues quickly and effectively
Efficient in planning routes and managing deliveries
Supports branch operations through task prioritization
Job Location:
If you are an individual with a disability or a disabled veteran and require a reasonable accommodation in applying for any posted position, please contact Human Resources at US: 855.556.3221, or by email to: with the nature of your accommodation request and include the Business name, location and title of the job opening. Please allow one (1) business day for a reply.
All employment offers are contingent upon successful completion of a background check and drug screen, as permitted by law.
Competitive weekly/bi-weekly pay, discretionary bonuses, 401(k) with company match, Employee Stock Purchase Plan, paid time off (vacation, sick, volunteer, holidays, birthday, floating), medical/dental/vision, flexible spending accounts, company-paid life and short-term disability, plus optional long-term disability, and additional life insurance.
Benefits
- Competitive salaries for all team members paid weekly
- 401(k) Retirement Plan with company matching
- Employee Stock Purchase Program
- Paid Vacation, Sick Time, Volunteer Day, Holidays, Birthday, and Floating Holidays
- Paid Parental Leave, Adoption Assistance Program
- Medical, Dental and Vision Benefits
- Flexible and Dependent Care Spending Accounts
- Company paid Life insurance and Short-Term Disability
- Additional Life Insurance and Long-Term Disability also offered
- Mental, Physical and Emotional Well-Being Programs for Employees and Families
- Wellness Program and Safety Program with Bonuses for our Drivers
- Employee Referral Bonus Program
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for a Crane Maintenance Mechanic, to join our team in Seattle, Sea Tac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington.As a crane maintenance mechanic, you will ensure the safety and efficient operation of our cranes, essential equipment for our manufacturing processes.You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.Position ResponsibilitiesInspect, maintain, repair, rebuild, retrofit, modify, assemble, disassemble, troubleshoot, analyze, diagnose, calibrate, adjust, and test mechanical systems and or subsystems of all types of cranes such as, but not limited to cab operated, radio controlled, jib type, pendant operated, etc. Know, understand, and work in compliance with SHEA and other applicable codes and regulations for overhead cranes
Coordinate and work with management, engineering, equipment vendors, and other organizations to analyze equipment design requirements and capabilities.
Use schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances.
Determine and/or develop methods where procedures may not be available.Devise and make shop aids to facilitate work. Operate and utilize mechanical, test equipment and test systems, precision devices in failure analysis, all forms of predictive/preventative technologies, as required on cranes.Operate, use and maintain overhead maintenance work platformsMaintain, adjust, install and repair, hydraulic, pneumatic and electric brake system components on cranes and bridges as requires.Inspect and maintain building runway rails and expansion joints.Maintain mechanical crane and hoist systems including cables, chain, sheaves and hooks.Perform the operational tests and load tests of cranes and bridges as required by Engineering, SHEA and other applicable codes and regulations.Maintain logs, charts, and perform written and verbal tie-in records.Prepare reports and schedules as required.Work with and assist employees of other classifications as required.
Perform work in other classifications when incidental but necessary to the accomplishment of the assignment.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C. F. R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asyleeResumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).Basic Qualifications2+ Years experience using schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances
2+Years experience maintaining mechanical cranes and hoists systems including cables, chain sheaves and hooks.
This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.
Able to lift up to 35 pounds.Preferred Qualifications:Experience inspecting and maintaining building runway rails and expansion joints.
Preference given to those with 2 years overhead crane experience.Typical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.Drug Free WorkplaceBoeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement :This position is for all shiftsTotal Rewards & Pay TransparencyAt Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary pay range: 33.32 – 61.01Applications for this position will be accepted until May. 29, 2026Language RequirementsEnglish PreferredRelocationRelocation assistance is not a negotiable benefit for this position.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
