Gantry Crane Operator Jobs in Usa

Thank you for your interest in joining our team! Cooper Consolidated is a balanced, asset-based provider of midstream stevedoring, barge, marine, and logistics services. With operations based along the lower Mississippi River between Southwest Pass and Baton Rouge, we provide cargo handling and movements throughout the U.S. inland waterway system. Our expert team ensures your important cargo is safely transported from origin to destination while making the experience as easy and worry-free as possible.

At Cooper Consolidated, our goal is to be the leader in the cargo handling industry. The key to this rests squarely with our people, and the backbone of how our people operate is our unique culture. The CC Way - 28 principles of our high-performing culture - describes the values, behaviors, and practices that are the foundation of this culture. It's what makes us a leader in our industry.

Do you have experience operating crawler excavators, payloaders and bulldozers in a maritime environment? Do you enjoy working outdoors and on the river? If so, this may be the opportunity for you. Cooper Consolidated offers exceptional benefits and an amazing 401K match! This job is primarily responsible for operating and maintaining heavy equipment, including but not limited to bobcats, cherry pickers, tractors, front end loaders, man lifts, backhoes, and forklifts; depending on area supported may also operate and/or maintain dock cranes and floating cranes.

In this job, you will:

• Fully participate in the company Safety Program and attends daily pre-shift meetings.
• Perform all duties within compliance of OSHA, company safety, and environmental regulations (ISO where applicable); including wearing appropriate PPE for task being performed.
• Receive work orders from supervisory personnel.
• Communicate flagging instructions to personnel, when/as required.
• Inspect heavy equipment and/or verify inspection prior to use; looking for defects and ensuring proper working order of equipment each shift and complete necessary checklists.
• Inspect and maintain rigging.
• Start-up equipment and perform duties as per assigned work orders.
• Track assigned work and report completion of duties to supervisory personnel.
• Coordinate equipment locations within working areas with appropriate personnel/flagmen.
• Assist maintenance personnel with preventive maintenance and equipment repairs, when required.
• Perform rigging inspections.
• Perform cover handling; may perform barge cover handling/barge drafting.
• Operate other equipment as required.
• Properly shut down equipment and secure upon completion of assigned task.
• Other duties as assigned.

Here's what you'll need to be considered:

Education: Required - High school diploma or equivalent, or equivalent combination of education and experience.

Experience: Preferred 6 months' experience working in an industrial environment with a dependable work record; Experience in operation of additional various heavy equipment.

Knowledge, Skills, and Abilities:

• Thorough knowledge of the operation and maintenance of assigned equipment.
• Thorough knowledge of the occupational hazards of the work and of necessary safety precautions for the safe operation of assigned equipment.
• Working knowledge and understanding for proper methods for lifting machine/loads per equipment utilized in job duties performed.
• Effective interpersonal, oral and written communication skills with the ability to interact with all levels of people within and outside the organization.
• Ability to identify operating deficiencies and defects, determine necessary corrective measures, and make minor repairs/service assigned equipment.
• Ability to remain focused on exceptional customer service, both internally and externally.
• Ability to safely maneuver equipment in tight spaces.
• Ability to work extended hours, evenings, weekends, and holidays, as needed.
• Must have reliable transportation to get to and from work sites; work site location will depend on business needs and will typically be in the following parish(es): Ascension Parish, Jefferson Parish, Plaquemines Parish, Orleans Parish, St. Charles Parish, St. James Parish, St. John the Baptist Parish, West Baton Rouge Parish.

Here's additional information you need to know:

Physical Demands & Requirements:

• Ability to lift/push/pull 45 lbs. occasionally.
• Ability to climb, crawl, stoop, kneel and balance.
• Acutely aware of surroundings with ability to quickly adjust to a signal or change in environment.
• Ability to understand and communicate verbally, in person and over two-way radio.
• Ability to work outside in extreme weather conditions.
• Able to perform work in confined spaces.
• Ability to work around/on deep water; where applicable.
• Ability to work in an environment with high dust levels around grain and other bulk products.
• Ability to meet requirements of PFT and fit testing, when applicable.
• Ability to meet requirement of and utilize all applicable PPE, when applicable.
• Ability to work extended hours, weekend, holidays and/or alternate shifts as needed.
• Uses peripheral vision and depth perception for tasks being performed.

Environmental Conditions:

The work environment described here are meant to be representative of those an employee would normally encounter while performing the essential functions of this job. The physical environment requires the employee to work both inside and outside in heat/cold, wet/humid, and dry/arid conditions. Frequently required to use personal protective equipment. Travel, 5%-20% may be required at some facilities. This may include off-site training and/or work at alternate locations.

Are you ready to make a meaningful career move & an impact at Cooper Consolidated, LLC? Apply today!

Known in our industry for stability and high ethics, Cooper Consolidated, LLC offers a stellar benefits package including: an outstanding 401(k) retirement plan with company contributions, medical, prescription drug, dental, vision, life, & disability benefits, flexible spending accounts, paid leave (holidays, vacation, sick), wellness programs, recognition programs, community involvement opportunities, and much more!

Cooper Consolidated, LLC is an Equal Opportunity Employer. EEO is the Law links in English or Spanish. We are unable to legally hire anyone who is not eligible to work in the United States nor are we able to sponsor visas.

The above is intended to describe the general content of and requirements for the performance of this position. It should not be construed as a detailed description of all the work requirements that may be performed in the job.

All Third Party Agencies, Headhunters, and Recruiters

Cooper Consolidated, LLC and its Subsidiaries only forms contracts with recruiters with whom we have an established relationship and with whom we have in place a signed contract. All contact from third parties must go through our Human Resources Department. Any contact made outside of our Human Resources Department by a third party will cancel any future business relationships between the third party and Cooper Consolidated, LLC and its Subsidiaries.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Press Operator, Hydraulic & Mechanical A, to join our Fabrication team in Algona, Auburn, and Everett Washington.

As a Press Operator Hydraulic & Mechanical A, you will be a vital part of our manufacturing team, responsible for setting up and operating hydraulic and mechanical presses to shape and form various materials. Your role will involve obtaining work packages, performing safety checks, and ensuring that all equipment is properly set up and maintained. You will utilize your technical skills to troubleshoot issues, verify material quality, and collaborate with team members to optimize production processes. Your attention to detail and commitment to excellence will directly contribute to our operational success.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain work package from the ready-to-work rack, work board, or assigned by Team Lead, or run previously set-up jobs by reviewing tie-ins from prior operators.

• Operate a computer to access information from prints, sketches, drawings, layout documents, and Boeing (BAC) specifications.

• Perform safety checks on machines, ensuring the area is clear of obstacles, power switches are off, and safety guards are installed.

• Move heavy materials, equipment, tools, and dies to the work area using stackers, Kalamar, die loaders, or overhead cranes, asking for assistance as needed.

• Check steam lines for cracks or cuts and verify o-rings are properly seated prior to hookup.

• Preheat dies and punches using electricity or steam, and verify temperature accuracy for hot dies with a temperature stick or pyrometer.

• Determine machine setup by reviewing work orders, tooling usage instructions, and die setup charts, making adjustments as required.

• Load and secure dies into the press, checking for defects and torquing as necessary.

• Examine tools, dies, and fixtures for damage, separating them using appropriate handling procedures.

• Set up press cycle programs using control panels or manual switches to adjust height, stroke, pressure, and cycle time.

• Develop patterns when necessary, cutting and tailoring materials like fiberglass and graphite to die requirements.

• Perform pull-outs on various types of metal and alloy tubes using a hydraulic tube pull-out machine.

• Verify that materials are free from burrs and debris, using hand deburring tools and denatured alcohol prior to forming operations.

• Consult with Team Lead and other personnel (e.g., engineering, planning, inspection) on process or job-related issues as required.

• Maintain a written tie-in book or electronic communication to coordinate with other shifts and dispose of hazardous materials in an approved manner.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 120.62 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 1+ Years of experience setting and using precision measuring tools; equipment such as micrometers, calipers, and/or dial indicators?

• 1+ Years of experience reading blueprints and structural drawings.

• 1+ Years of experience operating a hydraulic press.

• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

Preferred Qualifications:

• Must be able to stand, twist, bend, kneel and occasional crawling within an 8 hour shift.

• Ability to work in noisy environments while completing tasks.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 31, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

JACQUET is an established market leader in the distribution of stainless steel and nickel alloys in plate and round bar. Jacquet strives to be the best supplier of stainless steel and nickel cut parts by providing high quality in-house processing. Metals are sold either as-is or cut to made-to-measure sizes using plasma machines, water jets, lasers or saws. Jacquet applications cover many industrial sectors such as the water, environment, energy, mechanical and forged metal construction, chemical and agri-food, gas processing and storage, pharmaceutical and cosmetic sectors. We have four strategically placed locations within the US including Pennsylvania, California, Texas, and Wisconsin with many more globally.

We are currently seeking an experienced Saw Operator (bar/plate) at our Limerick, PA facility. We offer training, competitive pay, and a comprehensive benefits package. If you have the necessary skills and qualifications, we would enjoy the opportunity to speak with you!

Description:

The saw operator is responsible for the safe operation, maintenance, and cutting of stainless steel and nickel alloys per customer specifications.

Responsibilities:

• Take primary responsibility for operation and maintenance of the bar saw machine to include Production, Quality, accuracy of Production Logs, and BT/Travelers/Programs.
• Perform daily, weekly, and monthly maintenance as needed.
• Assist maintenance whenever requested or directed.
• Monitor your machines consumables. Cut and remove scrap. Report any deficiencies.
• Use plates, bars, rems, and programs as specified by Production Control. Prior approval for any changes.
• Work with QA department on all matters of quality to include quality of cut parts, cutting tolerances, quality statistics and ISO 9000 certification.
• Ensure that safe work practices are maintained always within your work section and always adhere to safety requirements and wear required protective equipment.
• Control the neat, orderly and accurate storage of all bar inventory in the plant.
• Organize the work area of your machines. All tools should be put away in an orderly manner.
• Maintain and constantly improve upon the cleanliness of your section.
• Perform other reasonable tasks as requested by the Operations Manager or the floor supervisor.

Requirements:

• Minimum 18 years
• High School Diploma or Equivalent
• Ability to read and write English
• Ability to stand, sit, bend, stoop, and reach
• Ability to lift 50 lbs.

Other Skills:

• Attention to detail
• Team player
• Basic familiarity with computers/software programs

Experience:

• 1+ years prior experience operating a plate or bar saw
• 1+ year(s) prior experience operating an overhead crane
• 1+ year(s) prior experience operating a forklift

Minimum Additional Training:

• Experience in math and statistics

Pay Range: $20 - $24 per hour depending upon experience

Compensation details: 20-24 Hourly Wage

PIfdb933f32776-26289-39824530

• 
  
• Unload steel trucks and place them in racks.
  
• Operate multiple machines, including saws and lathes.
  
• Inspect work and hold tolerances.
  

• 
  
• Understand all machining principles.
  
• Understand the correlation between lead error and helix angles, and be able to adjust the machine accordingly.
  
• Track and document die usage and evaluate die condition.
  

• 
  
• Identify and communicate recommendations for product and productivity enhancements (lean initiatives).
  
• Work in a team environment with material schedulers and product control to support customer needs.
  
• Maintain compliance with company policy, safety, and good housekeeping practices.
  
• Monitor and measure products to ensure tolerance/specs adherence.
  
• Effectively train new operators as required,
  
• Prioritize work efficiently and productively.
  
• Upkeep and cleanliness of machines and the area.
  
• Troubleshoot machines as needed.
  
• Motivate co-workers for continuous quality improvement.
  
• Keep scrap and rework at minimal levels as defined.
  
• Additional duties as assigned.
  

• High School Diploma or GED required.

• 
  
• Minimum of 3 years proven experience.
  
• Sound mechanical aptitude with hands-on skills.
  
• Strong written and verbal communication skills.
  
• Demonstrated willingness and ability associated with being a self-starter.
  
• Basic blueprint reading skills.
  
• Basic product knowledge.
  
• Basic programming knowledge or experience.
  
• Basic set-up capabilities.
  
• Basic tooling knowledge.
  
• Basic understanding of feeds and speeds.
  
• Basic understanding of gearing terminology.
  
• Very minimal direction required.
  
• Overhead crane experience.
  
• Fork truck experience.
  

Laser Operator (2nd Shift) Location: Lindsay, NE
Pay: $19.00/hour
Shift: 2nd Shift | 3:30 PM – 2:00 AM

Build Precision. Drive Production. Grow Your Career.

If you enjoy hands-on work, operating advanced machinery, and being part of a team that values safety and quality, this opportunity is for you. Join our client‘s team as a Laser Operator and play a key role in producing high-quality components using cutting-edge CNC and fabrication equipment.

Position Summary

As a Laser Operator, you will set up and operate fabrication and CNC equipment to cut, shape, and assemble materials to precise specifications. This role requires attention to detail, mechanical aptitude, and a strong commitment to safety and teamwork.

Key Responsibilities

• Set up and operate fabrication equipment such as brakes, rolls, shears, flame cutters, and drill presses

• Accurately measure and cut materials to meet production specifications

• Operate CNC machines to achieve required parts-per-hour production goals

• Perform basic machine setups, including changing punches, dies, bits, and saw blades

• Read and interpret blueprints and measurement tools (tape measures, calipers)

• Rotate between workstations as production needs require

• Maintain machinery by cleaning, lubricating, and adjusting components

• Assist with inventory control, both physically and within systems

• Communicate effectively with supervisors and cross-functional teams

• Follow all safety standards and hold others accountable to the same

• Maintain a clean and organized work environment

• Perform additional duties as assigned to support safety, quality, and production goals

Qualifications

• Knowledge of metal cutting and punching processes preferred

• Ability to read blueprints and use precision measuring tools

• Basic math skills (addition, subtraction, multiplication, division)

• Strong communication and teamwork skills

• Ability to lift up to 50 lbs

• Willingness to learn CNC programming and machine operation

• Ability to communicate with technical support teams and equipment technicians

• Forklift and overhead crane experience a plus (or willingness to be trained)

• Ability to follow safety procedures and maintain a safe work environment

• Must be able to communicate in English

What We Offer

• Full-time, stable 2nd shift schedule

• Competitive hourly pay

• Opportunity to learn advanced manufacturing and CNC skills

• Career growth in a safety-focused, team-oriented environment

Ready to take the next step in a high-demand manufacturing role? Apply today to join a team where precision, safety, and growth come together.

#gethiredcolumbus

• Reading and interpreting production schedules, job router cards, blueprints, non-conformance reports, and any other materials that summarize requirements for the grinding of rubber rolls.
• Locating and retrieving rolls to the grinding production area utilizing overhead cranes and various materials handling equipment.
• Preparing the individual rolls for installation in the grinding equipment, utilizing knives to trim back rubber from the rollers prior to installing the rollers into the equipment, cleaning steel surfaces of rollers using hand or mechanical equipment, cleaning steel surfaces of rollers using hand or mechanical equipment, such as die-grinders or sheet abrasive/polishing materials.
• Setting the grinding equipment, installing special grinding wheels or attachments, adjusting and setting tooling on tool posts, installing live-centers, chucks centers, extensions, dogs, etc.
• Aligning the rollers in the equipment to meet all dimensional requirements of job order. This includes adjustment for taper, TIR, roller surface finish, and finish dimensions.
• Measure all required dimensions and understand the relationship of the dimensions to the specific requirements of the job.
• Utilize all inspection and measurement equipment per procedure and instruction, including durometer gauges, pi-tapes, P&J gauges, micrometers, vernier diameter tapes, dial indicators, profilometers, temperature-indicating devices, and others as needed.
• Complete the grinding operation and inspect the finished product to ensure that all requirements are met.
• Complete all necessary paperwork, inspection reports, job router information, and operator sign-off on job.
• Clean all metal and rubber surfaces prior to protective wrapping.
• Unload the grinding equipment safely and without damage or harm to personnel, equipment or finished product.
• Deliver the finished product to a designated storage area or shipping container.
• Safely operate the grinding equipment to produce the desired results and meet the specific job requirement.
• Maintain a clean work environment, floors swept, supplies properly stored, equipment cleaned and well maintained.
• Other duties as assigned by supervisor.
  
  

• Language Skills
• Read, write, and understands English.
• Read mechanical blueprints and interpret technical documents.
• Write legible documentation conforming to prescribed style and format.
• Communicates effectively.
  
  

• Utilize all inspection and measurement equipment per procedure and instruction, including Durometer gauges, Micrometers, Vernier diameter tapes, Dial indicators, Profilometers, temperature-indicating devices, and others as needed.
• Understands/applies basic math, including accurate addition, subtraction, multiplication, and division.
  
  

• Learn and utilize safe operating procedures.
• Strong reasoning ability.
  
  

• Stand, bend, and stooping for extended periods of time.
• Reaches by extending hand(s) or arm(s) in any direction.
• Ability to exert up to 50 pounds of force, and/or up to 25 pounds of force frequently.
• Required ability to use finger and hand dexterity to manipulate objects and lift 50 pounds.
• Vision ability within normal parameters.
• Hearing within normal range.
• Coordination to step over and maneuver around obstacles.
• Demonstrates safe operating habits.
  
  

• High school diploma, GED, or high school equivalency
  
  

Role and Responsibilities

Heavy machinery manufacturing and operation of designated and assigned equipment and machinery including but not limited to roll forming, press operation, milling, manufacturing fabrication, welding, cutting, routing, molding, extrusion, etc.

Entry level production manufacturer of sectional and rolling doors and door components.

Manufacture products and components according to product specifications, drawings, BOM's, work orders and / or run schedules.

Ensure product specification and product quality by following established procedures, SOP's, maintaining of proper settings, and quality standards.

Verify product specification and product quality through inspection, observation, and measuring work pieces.

Adjust machine / equipment performance to meet product specifications and quality standards.

Utilize hand and power tools, cranes, and other material handling devices for manufacturing assistance.

Fabricate and assemble sectional and rolling doors sections and component materials as required by the job.

Qualifications

Industrial manufacturing experience desired.

Able to read and understand work instructions in English.

Ability to add, subtract, multiply, and divide in all units of measure.

Experience with micrometers and other measuring devices.

Roll Forming experience is a plus.

Education

Preferred High School Diploma or GED.

Physical / Work Environment Requirements

* Frequent bending, pushing / pulling, reaching and lifting periodically up to 75 pounds.

* Regularly lifting up to 35 -50 pounds

://