Framework Desktop Mainboard Dimensions Jobs in Usa

• Under the direction of a supervisor and/or experienced machinist, responsible for quality parts produced on CNC 5-axis Mazak Integrex in a timely, safe and efficient manner.
• Operate, perform set-up changes and first article inspections on production runs utilizing CNC Machines.
• Load parts utilizing overhead lifting equipment, operating controls, setting offsets, simple edits, deburring and inspection of quality parts for conformance to requirements.
• Identify problems before production runs, then start and observe machine operation to detect any other malfunctions or out-of-tolerance conditions and adjust machine controls or control media as required.
• Use precision measuring instruments, read blueprints, and job orders to determine dimensions, tolerance and tooling requirements.
• Maintain knowledge of dimensions and tolerances for tooling instructions such as fixtures, feed rates, cutting speeds, depth of cut and cutting tools to be used.
• Keep equipment and work area clean and orderly and perform basic preventative maintenance functions on equipment.
• Perform other work-related tasks as assigned.
• Comply with all NOV Company and HSE policies and procedures.
• Ability to identify and correctly utilize Capto tool holders, mill tooling, turning tools and inserts
• Read blueprints and use precision measuring instrument including profilometers, dial indicators, depth gages, OD/ID micrometers, and groove micrometers
• Hold tight tolerances, often +/-0.0005
• Works to a dispatch report and ensure that jobs are run in proper sequence.
• Ensure proper machining of product to ensure products that can be sent to the next operation are within specification.
• Produces good quality product that fully meets specifications.
• Maintains area and equipment.
• Manages own workflow.
• Meets safety, quality, delivery, and productivity measures.

• High school or GED
• Knowledge of basic math, blueprints and routers, required.
• Knowledge of the proper use of measuring tools/gauges and cutting tools, required.
• At least 3-5 years combined of CNC mill and CNC lathe experience or 5 axis experience.
• Can demonstrate good work ethic
• Can demonstrate teamwork

• Regularly required to sit or stand, bend, and reach.
• Regularly required to operate a computer and other office machinery using finger dexterity for typing and writing.
• Regularly required to communicate, converse with, and exchange information by means of the spoken and written word.
• Regularly required to perform light physical effort to lift or move lightweight materials up to 40 pounds.
• Regularly required to view a computer screen.

• Excellence
• Team Oriented
• Integrity
• Respectful
• Hardworking
• Dependable

• 
  
• You will set up and operate most types of conventional and computer numerical control machine tools such as lathes, vertical and horizontal boring mills; bench, milling machines; shapers; planers; grinders; thread cutters and drills.
  
• You will utilize many types of precision instruments and equipment such as vernier calipers, squares, protractors, micrometers, vee blocks, parallel bars, dial indicators, comparators, different gauges for accurate dimensions and tolerances.
  
• You will plan and lay out work from blueprints, work sheets, and drawings that may have missing or incorrect information.
  
• You will use shop mathematics and handbook formulas in computing and verifying dimensions in the planning, laying out, and final dimensional checking processes.
  
• You will produce desired cuts and finishes on various metals and other materials such as aluminum, brass, bronze, high carbon and alloy steels, chrome, nickel, titanium, molybdenum, super alloys, nylon, rubber, plastics, teflon, etc.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This may be a bargaining unit position.
  
• You may be required to successfully complete a pre-appointment physical examination.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
  
• This position may require exposure to high noise levels.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

Eaton's IS AER FMC division is currently seeking a Senior CNC Setup Machinist. The hourly rate for this position is $25 - $29 per hour. The hours for this shift are 7:00 am - 3:00 pm. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.

Eaton Aerospace Group is currently seeking CNC Setup Machinists to join our 1st shift team. This position is based in our North Charleston, SC facility. Relocation assistance will be provided. The range for this role is $25-29 per hour. This position is currently offering a sign-on bonus of $3,000*; less applicable withholding.

Position Overview: The setup machinist will lead the transition/changeover between production runs on various CNC machines such as mills and lathes then operate select machines through the remainder of the production run while ensuring quality parts from the work cell.

Making what matters work at Eaton takes the passion of every employee around the world. We create an environment where creativity, invention and discovery become reality, each and every day. It's where bold, bright professionals like you can reach your full potentialand where you can help us reach ours.

In This Function You Will: Properly set tools in machine locations required for set-up & perform part changeover including program retrieval and input Establish work offsets (G54, G55, etc.) manually and utilizing probing technology Read, understand, and reset CNC machine program codes Be able to calculate and input axis coordinates for CNC machines up to 3 axis's or use spindle probe to determine work offsets Utilize Geometric Dimensioning and Tolerancing results to make adjustments to work offsets Additional benefits to include: Health insurance effective from first day of employment, air conditioned and well-maintained facility, paid lunch, two weeks of vacation upon hire. Eaton is invested in the learning and development of its employees, offering tuition assistance and capitalizing on new machining and measuring equipment.

Required (Basic) Qualifications: Must have a minimum of five (5) years' experience operating CNC lathes and/or mills in a manufacturing or operations environment or equivalent education Must have three (3) years' experience setting up CNC lathes and/or mills Candidates must be legally authorized to work in the United States without company sponsorship. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

Preferred Qualifications: Technical degree in manufacturing, machining, or related field Journeyman's Toolmaker Certification Experience with CNC or conversational programming Experience operating a variety of manual machines (lathes, mills, jig bore, grinders etc.) Familiar with Kaizen, Lean Manufacturing techniques such as Value Stream Mapping, 5S, TPM, Error Proofing, Standardized Work, Set up Reduction, Continuous Flow, and Pull Experience in Troubleshooting Problems using quality tools such as statistics, 8D, 5 Why, Fishbone diagrams, etc. PC computer skills (Excel, Access, Word, Outlook, etc...) with ability to learn other programs Must be able to understand and interpret blueprints and sketches including proficiency in Geometric Dimensioning and Tolerancing (GD&T). Must be able to perform basic shop math. Must have demonstrated mechanical aptitude.

• 
  
• Review the work order requirements and drawings, obtain fixtures and tools for preparation.
  
• Set up and operate CNC or manual lathes/mills to perform a variety of machining operations, to trace complex profiles requiring changes in set-up, speeds, feeds and tool angles per engineering drawings to meet daily production requirements.
  
• Set up and operate manual lathes/mills to perform a variety of machining operations i.e. perform single point threading per engineering drawings to meet daily production requirements
  
• Edit programs, speeds and feeds.
  
• Use manual tools to debur and degrease.
  
• Set-up and/or operate various drill presses, punch press involving drilling, taping, reaming, countersinking.
  
• Use jigs and fixtures, block or shim parts to level and align the irregular shaped parts.
  
• Check for concentricity, formed sections, steps or shoulder to close +/- tolerances of 0.001\" or less for faulty operation or defective material.
  
• Improvise machine set-up to perform non-standard type of work.
  
• Train entry level machinist.
  
• Report any problems or difficulties to the supervisor.
  
• Maintain work area, equipment and supplies in a neat and orderly condition & 6S.
  
• Following safety procedures and policies.
  
• Perform other work-related duties as assigned.
  

• 
  
• 2~ 5 years of experience in machining
  
• Able to set up and operate CNC machine
  
• Understand of G codes and M codes
  
• Able to read drawings and blueprints, calculate or determine dimensions not given.
  
• Able to work independently.
  
• Able to use measuring equipment, including caliber, micrometers, checking gauge etc.
  
• Data input skills / computer skills.
  
• PLC knowledge of controller to be able to edit programs.
  
• Knowledge of operating manual secondary equipment, drill press, saw, punch press, etc.
  
• Able to operate lathes and/or mills
  
• Knowledge of turning, facing and boring to hold tolerances +/- 0.001.
  
• Lifting up to 50lbs
  
• EHS awareness
  
• Flexibility in shift times.
  
• Flexibility in working overtime.
  

• 
  
• HS Diploma/GED or equivalent
  
• Associate's / Technical Degree (two years) is preferred.
  

• US Citizen

• 
  
• Ability to lay out, fit, and weld fabricated components to assemble structural forms
  
• Proficient in blueprint reading for layout
  
• Selects equipment and plans layout, assembly, and welding; a layout, positions, aligns, and fits components together; positions work pieces manually or by using overhead or jib cranes.
  
• Ability to clamp and tack-weld parts to secure in position for welding.
  
• Use tape measure, square, combination square, level and other related hand tools for part fabrication as per blueprints.
  
• Perform simple mathematics calculation to find part dimensions.
  
• Perform 100% first article inspections (first piece of each fabricated drawing) by visual examine work piece, measure part or hole dimensions or sizes, square, flatness and other drawing instructions.
  
• Set up welding machine and welding gun: assemble/disassemble welding tips and its liner, wire feed and voltage, using arc or gas-shielded arc welding equipment.
  
• Repairs products by dismantling, straightening, reshaping, and reassembling parts.
  
• Operate cutting torch and plasma torch.
  
• Operate small saw machine and iron machine for cutting and coping, notching materials.
  
• Transfer or position work pieces manually by using overhead or jib cranes. Examines and feels surface of work piece for defects. Forklift is an advantage to perform tasks.
  
• Identify and select different type of materials including different grades of metal for fabrication.
  
• Selects grade of abrasive wheel, disk and die grinder bits according to specifications, knowledge of abrasives, and condition of metal, and attaches to grinder.
  
• Ability to pull trigger to start and hold power tool (i.e. chatter gun, die grinder, angle grinder etc.) and move it over surface of work piece to remove weld splatter, high spot, burr, and rust from surfaces of structure components including scratches, laminated metal and excess weld material.
  
• Ability to load trucks manually with lifting equipment.
  
• Regular attendance, ability to arrive at work punctually, ability to work on-site, ability to work overtime.
  
• Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management.
  
• Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department.
  
• Must be able to operate other small machines.
  

• 
  
• Ability to calculate figures and amounts such as percentages, area, circumference, volume, and apply concepts of algebra and geometry.
  
• Ability to add and subtract two-digit numbers, fractions, and multiply and divide with 10's and 100's. Ability to perform these operations using units of American money and weight measurement, volume, and distance.
  

• 
  
• Must pass American Welding Society 2g Plate Test / Canadian Welding Bureau certified.
  
• One-year structural fitting experience recommended.
  

• 
  
• Properly set tools in machine locations required for set-up & perform part changeover including program retrieval and input
  
• Establish work offsets (G54, G55, etc.) manually and utilizing probing technology
  
• Read, understand, and reset CNC machine program codes
  
• Calculate and input axis coordinates for CNC machines up to 3 axis's or use a spindle probe to determine work offsets
  
• Calculate and input axis coordinates X, Y, and Z or use a spindle probe to determine work offsets
  
• Utilize Geometric Dimensioning and Tolerancing results to make adjustments to work offsets
  

• 
  
• Must have a high school diploma or GED from an accredited institution.
  
• Must have a minimum of two (2) years experience operating CNC lathes and/or mills in a manufacturing or operations environment or an Associate's degree or higher in machining or manufacturing related discipline.
  
• A minimum of one (1) years experience setting up CNC lathes and/or mills
  
• Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
  

• 
  
• Technical degree in manufacturing, machining, or related field
  
• Experience operating a variety of manual machines (lathes, mills, jig bore, grinders, etc.)
  

• 
  
• Able to understand and interpret blueprints and sketches including proficiency in Geometric Dimensioning and Tolerancing (GD&T).
  
• Able to perform basic shop math.
  
• A demonstrated mechanical aptitude.
  

• 
  
• Building complex assemblies by performing the layout, fit-up, assembly and welding operations.
  
• Certify to multiple weld specifications as required for different materials and weld processes.
  
• Reading and interpreting blueprints, sketches, drawings, routing instructions, manuals, specifications and procedures to determine dimensions and tolerances of finished weldment.
  
• Measuring, marking and scribing dimensions and reference points on material or work pieces as guides for subsequent machining or fabrication operations as required by router instructions and good shop practice.
  
• Using precision measurement instruments.
  
• Operating hand tools and other shop equipment such as grinders, positioners, turn rolls.
  
• Perform material handling of large weldments using overhead cranes, using proper lifting techniques with high degree of attention to safety.
  
• May operate fork truck, with certification requirements
  
• Ensure proper data entry of inspection and other information into computer system.
  
• Monitor and maintain proper cleanliness and function of equipment and work area on a daily basis.
  

• 
  
• A minimum of two years of trade school or vocational education or appropriate work experience in welding
  
• General welding knowledge, shop math, precision measuring instruments, blueprint reading and welding symbols
  
• Must have MIG and TIG welding experience; physical weld test will be required in selection process to meet minimum criteria for qualification.
  
• Material familiarity with carbon and stainless steel, nickel-based alloys and aluminum
  
• Robotic welding/programming a plus
  

• 
  
• Present a positive attitude
  
• Be able to work well with meeting deadlines
  
• Have a good work ethic and attendance
  
• Have the ability to communicate well with peers, engineers and leadership
  

• 
  
• Ensure glove and hand safety.
  
• Follow bench grinder and surface grinder safety protocols.
  
• Use face shields appropriately.
  
• Inspect cranes and hoists and maintain logs.
  
• Properly rig and use cranes.
  
• Safely operate CNC mills and lathes, adhering to manufacturer and company safety protocols.
  
• Practice proper lifting techniques and recognize trip hazards.
  
• Complete safety skills and SED on time.
  
• Participate in monthly safety meetings.
  
• Follow all life-critical policies and JM Health and Safety policies.
  
• Use appropriate personal protective equipment (PPE) as required.
  
• Operate only the equipment for which you have been trained by a qualified person.
  
• Never tamper with machine safety guards or switches.
  
• Ensure setups can safely hold parts against cutting forces before starting machines.
  
• Exercise caution when running new programs, especially at the start and after tool changes.
  
• Know the location of emergency stops and practice using them.
  
• Maintain a tidy workspace to prevent accidents and injuries.
  
• Follow safety protocols for 2\" and hand grinders.
  

• 
  
• Start and home milling machines and lathes.
  
• Touch off tools, set offsets, and determine tool lengths and diameters using a tool setter.
  
• Load programs through Predator and USB and send proven programs back for updates.
  
• Adjust and edit tools and work offsets.
  
• Set XYZ and Z coordinates.
  
• Load and unload workpieces for milling operations.
  
• Change tool setter and probe batteries.
  
• Perform pre-production maintenance checks and clean machines.
  
• Change machine filters and check/fill coolant levels.
  
• Read refractometers for coolant concentration.
  
• Stone machine tables, fixtures, vises, chucks, and turrets prior to use.
  
• Perform basic mill setups, including indicating fixtures and vises.
  
• Setup mill and lathe tools and replace or identify worn tooling.
  
• Indicate vises and fixtures, change jaws, and set clamps.
  
• Use proper collets and holders for tools, demonstrating proper use.
  
• Follow and update Standard Operating Procedures (SOPs).
  
• Clean machine tool tapers and verify delivery of coolants and fluids.
  
• Empty chip bins and containers.
  
• Deburr finished parts and clean raw materials prior to loading.
  
• Grease vises and use machine DRO to understand machine positions.
  
• Clean collets and remove the chips, and clean tool holder caps before and after use.
  

• 
  
• Understand basic GD&T.
  
• Measure and verify length, width, and diameter of raw materials.
  
• Inspect and identify materials by type.
  
• Properly use and care for measurement equipment.
  
• Measure part/feature height/depth with depth micrometers.
  
• Measure with calipers (vernier, dial, and digital), ID micrometers, and OD micrometers.
  
• Measure threads with thread gauges.
  
• Measure part features, profiles, and dimensions optically or comparatively.
  
• Review part prints and identify critical dimensions.
  
• Verify milled and turned parts for quality and compliance.
  
• Test and verify calibrations of inspection tools.
  

• 
  
• Perform area housekeeping.
  
• Conduct shift changes and exchange information effectively.
  
• Maintain a good attitude and be a team player.
  
• Meet or exceed standard run times.
  
• Perform non-routine task lists and operator maintenance tasks.
  
• Maintain coolant levels and check concentration.
  
• Report any maintenance needs to the lead.
  
• Attend minute meetings on time.
  
• Provide useful suggestions that contribute to positive work results.
  
• Ensure the work area is ready for the next user.
  
• Accurately check tools out of the tool crib.
  

• 
  
• Minimum of 1-3 years' experience is required
  
• Extensive experience as a CNC Technician with a focus on safety and operational competencies.
  
• Strong understanding of CNC machine setup, maintenance, and troubleshooting.
  
• Ability to read and interpret technical documents and blueprints.
  
• Proficiency in using tool setters, collets, holders, and other CNC-related tools.
  
• Excellent attention to detail and problem-solving skills.
  
• Ability to follow and update SOPs.
  
• Strong communication and teamwork skills.
  

• 
  
• Ability to lift and move heavy objects up to 50 lbs.
  
• Prolonged periods of standing and working on machines.
  
• Manual dexterity and hand-eye coordination.
  

• 
  
• Manufacturing plant with exposure to noise, dust, and machinery.
  
• Use of personal protective equipment (PPE) as required.
  

Position Title Pharmacy Director
- Infusion Services Southlake Campus Position Summary / Career Interest: • Provides effective leadership and direction for Infusion Services.

Able to strategically identify, internalize and communicate the critical success factors necessary to support Health-System and Pharmacy Enterprise goals.

• Develops, maintains, communicates, and executes a vision and plan for continual improvement and provision of exceptional quality service including clinical, patient care, patient safety, pharmacoeconomic, operational and personnel dimensions.

• Serves as an effective communicator of the organization's vision and goals and the Pharmacy Department's role in achieving those.

• Cultivates and maintains excellent multidisciplinary rapport with physicians, nurses, case managers and high-level leadership.

• Manages his/her responsibilities in a way that supports the achievement of departmental goals.

Works effectively with others in the management team to accomplish organizational goals and to identify and resolve problems at the departmental level.

Skillfully administers, directs, and allocates all organizational resources.

• Effectively uses the appropriate financial concepts and tools to analyze situations and make financial decisions that support the achievement of short and longer-term departmental financial goals.

• Supports the ongoing professional development of the management team.

• Actively participates in local, regional, and national professional organizations to facilitate networking and benchmarking.

• Creates and communicates the "big picture" understanding of the health system and works to ensure that Infusion Services support the organization's competitive position.

• Identifies opportunities and needs for new or enhanced pharmacy services to support the mission of the organization.

Responsibilities and Essential Job Functions Demonstrates competence in the areas of critical thinking, interpersonal relationships, and technical skills.

Demonstrates ability to provide care/service safely and efficiently for the care of each patient.

Coordinates the compounding of, dispensing of, and record keeping related to medications for all patients.

Coordinates timely drug distribution from the generation of the medication order until administration of the medication using a team approach to empower pharmacy staff.

Coordinates the provision of patient-focused pharmaceutical care through the following functions: rational, safe and cost-effective drug therapy management, patient education, drug and poison information, procurement of pharmaceuticals and active participation on the multidisciplinary healthcare team.

Provides effective leadership and direction to the Department of Pharmacy.

Able to strategically identify, internalize and communicate the critical success factors necessary for the Pharmacy to support Hospital and Pharmacy goals.

Develops, maintains, communicates and executes a vision and plan for continual improvement and provision of exceptional quality pharmacy service including; clinical, patient care, medication safety, pharmacoeconomic, operational and personnel dimensions.

Serves as an effective communicator of the organization's vision and goals and the Pharmacy Department's role in achieving those.

Expresses ideas clearly and effectively (gaining agreement and/or understanding), by adjusting language, terminology and style to the characteristics and needs of the audience as well as the venue for the communication.

Cultivates and maintains excellent rapport with Physicians, Nursing, Executive groups as well as other pertinent areas of the Hospital.

Manages his/her responsibilities in a way that supports the achievement of departmental goals.

Works effectively with others in the management team to accomplish organizational goals and to identify and resolve problems at the departmental level.

Skillfully administers, directs and allocates all organizational resources.

Leads the department to achievement of excellent pharmaceutical care by providing vision for the development of exceptional quality pharmacy services, assuring accountability and facilitating effective communication relative to these initiatives.

Monitors departmental productivity and communicates both requested information and data deemed pertinent to the Executive Team.

Adapts to meet service, quality, and cost expectations utilizing data.

Participates in Hospital committees and interdisciplinary efforts to enhance medication use and control medication costs, by providing vision for quality and service initiatives to improve patient care.

Including, but not limited to:
- Pharmacy and Therapeutics Commitee and Subcommitees
- Medical Director
- Hospital Director Partnerships
- Other appropriate Hospital or Medical Staff Committees Effectively uses the appropriate financial concepts and tools to analyze situations and make financial decisions that support the achievement of short and longer-term departmental objectives.

Manages to meet fiscal goals and works with Hospital Administration on budget management.

Conducts pharmaceutical procurement and resource utilization with economic and clinical consideration.

Demonstrates personal effectiveness in leading the unit/team towards its goals.

Models appropriate values and maintains and promotes social, ethical and organizational norms.

Supports the ongoing development of the management team.

Actively participates in local, regional and national professional organizations to facilitate networking and benchmarking.

Creates and communicates the "big picture" understanding of the hospital and works to ensure that Pharmacy department supports the organization's desired competitive position.

Identifies opportunities and needs for new or enhanced pharmacy services to support the mission of the organization.

Uses appropriate interpersonal styles and methods to develop a unit/team-wide spirit and intra-team and inter-team cooperation.

Maintains focus on all key stakeholders and supports the unit/team ability to deliver on all valid stakeholder expectations.

Serves as the Pharmacist-In-Charge for the Hospital pharmacy.

Assures compliance with all applicable local, state and federal regulations and JCAHO standards relative to the acquisition, storage, handling, and dispensing of pharmaceuticals and the provision of pharmaceutical care.

Responsible for all aspects of personnel management for the pharmacy management team.

Identifies personal professional development needs and maintains a plan for continued growth.

Coordinates the Hospital's educational mission with the School of Pharmacy.

If applicable, participation in the quality management program is expected with the goal of improving services by monitoring processes, analyzing data, implementing interventions to improve and evaluating the effectiveness of those interventions.

Responsibilities may include working to establish and maintain long and short term goals for the Quality Management Program; monitoring and documenting Quality Improvement Projects (QIPs) for progress in meeting QI goals; and providing guidance and education to staff on Quality Management priorities and projects.

If applicable, as part of the program, the staff will uphold the quality of the Patient Management Program to include the development and reassessment of the program.

Non-essential Responsibilities Contribute to KU pharmacy department publications.

Prepare poster presentations for a national pharmacy association meeting.

Share professional expertise by providing an educational lecture or presentation as part of one of the following:
- KUMC Grand Rounds
- Local, state, or national pharmaceutical association meeting
- School of Pharmacy classroom setting
- Nursing Education and Development program
- Outreach program
- Other continuing education events Participate in a research projects.

Must be able to perform the professional, clinical and or technical competencies of the assigned unit or department.

These statements are intended to describe the essential functions of the job and are not intended to be an exhaustive list of all responsibilities.

Skills and duties may vary dependent upon your department or unit.

Other duties may be assigned as required.

Required Education and Experience Bachelors Degree in Pharmacy High School Graduate Experience in managing pharmacy services in a large tertiary care hospital setting.

5 or more years Supervisory and management experience Experience in the provision of formal education and/or precepting for pharmacy students and/or residents.

Preferred Education and Experience Master's Degree Pharmacy, Health Administration or Business Administration Pharmacy Doctorate Completion of an accredited pharmacy residency Required Licensure and Certification Licensed Pharmacist
- State Board of Pharmacy within 120 Days Knowledge Requirements Excellent communications skills both verbal and written.

Membership in regional & national pharmacy organization(s) Computer skills
- Ability to utilize Windows based programs, Access, Excel and Power point to create or manage spreadsheets and presentations.

Time Type: Full time Job Requisition ID: R-46095 Important information for you to know as you apply: The health system is an equal employment opportunity employer.

Qualified applicants are considered for employment without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, ancestry, age, disability, veteran status, genetic information, or any other legally-protected status.

See also Diversity, Equity & Inclusion .

The health system provides reasonable accommodations to qualified individuals with disabilities.

If you need to request reasonable accommodations for your disability as you navigate the recruitment process, please let our recruiters know by requesting an Accommodation Request form using this link .

Employment with the health system is contingent upon, among other things, agreeing to the health-system-dispute-resolution-program.pdf and signing the agreement to the DRP.

Need help finding the right job? We can recommend jobs specifically for you! Create a custom Job Alert by selecting criteria that suit your career interests.

d24ad0b8-823f-4e68-a892-2986ccdf7392

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Company is currently seeking Software Engineers–Simulationto support ourSimulation Frameworks, Services and Tools deployments team located inBerkeley, Missouri.This position will focus on supporting the Software Fabric / Boeing Emulation, Simulation, Test and Analysis Framework (BESTAF) business organization

This position will be a software development role on the Simulation Frameworks, Services, and Tools (SFST) deployment team that provides simulation software across the Boeing enterprise. The suite of tools support software verification, hardware verification, flight trainers, and warfare scenario simulation. The successful candidate will coordinate with commercial, defense, and other customers for requirements.

The candidate will participate in small developmental teams – and sometimes independently – to implement those requirements. Agile methodologies such as sprint planning, scrums, retrospectives, and demonstrations are expected.

The candidate should enjoy working collaboratively with others, have a commitment to customer satisfaction and process improvement, and be successful working in a multi-program environment. They will support the development of solutions to a wide range of complex problems that require ingenuity and innovation. They should be adaptable to new development environments and eager to work with and learn new technologies.

Our teams are currently hiring for a broad range of experience levels including Experienced and Senior Level Software Engineers.

Position Responsibilities:

• Designs, architects, and develops simulation models, simulation visualizations, virtual environments/platforms and frameworks to enhance test performance, safety, and durability of software and hardware systems throughout the entire product lifecycle
• Partners with stakeholders to review and identify simulation requirements and dynamics of the systems being simulated
• Performs design, modeling, simulation, testing, and analysis to assess and optimize overall system performance and capabilities
• Performs data collection and processing for use in simulations
• Validates, verifies, and refines simulation software code, models, simulations, test procedures and test environments, executing test procedures and documenting test results and models against real-world data, test data, benchmarks, or other similar models
• Documents and maintains technical code, algorithms, specifications and descriptions of simulation models
• Partners with cross functional engineering teams to enable integration of simulation software with hardware devices and systems
• Implements current and emerging technologies, tools, frameworks, and methods in the software engineering simulation environment
• Modernizes, migrates, sustains, and updates simulation software to adapt legacy systems to new operating systems
• Performs simulation software project management functions

Basic Qualifications (Required Skills/ Experience):

• 4+ years of experience in software programming with C, C++, C#, .NET coding, debug, and development
• 2 + years of experience in software programming with Python

Preferred Qualifications (Desired Skills/Experience):

• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science.
• Level 3: 3 or more years' related work experience or an equivalent combination of education and experience
• Level 4: 5 or more years' related work experience or an equivalent combination of education and experience
• 4 or more years' related work experience or an equivalent combination of education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience
• 2 or more years' experience in software programming with Rust
• Active Security Clearance
• Experience with embedded software and hardware interfacing-software
• Experience working across software-interface boundaries, including hardware, firmware, and software (Including technical coordination with interfacing teams)
• Experience handling multiple projects simultaneously
• Decision making abilities to complete efforts with minimal requirements definition
• Experience in software development in Visual Studio
• Experience with avionics and Ethernet communication protocols
• Experience with Agile Methodology
• Experience with Git, Continuous Integration, Cloud Computing technologies

Drug Free Workplace:

Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Travel:

10%

CodeVue Coding Challenge:

To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range for Associate Level (Level 2): $98,600 - $133,400

Summary pay range for Experienced Level (Level 3): $123,250 - $166,750

Summary pay range for Senior Level (Level 4): $153,000 - $207,000

Applications for this position will be accepted until Mar. 24, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim U.S. Secret Clearance Pre-Start and final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.