Fluted Panel Wall Design Jobs in Usa

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

We are seeking a professional Power Design Electrical Engineer to assume a key role within the System Power, Analog and Controls Department. 
 
Do you enjoy power converter design? 
Do early-career engineers come to you for technical guidance? 
Do you have a strong desire to work on projects that are critical to the defense of our nation? 
  
If your answers are yes, we are looking for you to join our team!

 
 What You Will Do

• Design, analyze (including thermal considerations), simulate, and test power conversion circuitry potentially utilizing any standard non-isolated power conversion topologies (buck, boost, buck-boost) including modules and discrete designs.  

• Guide Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation. 

• Perform design work within the bounds of a given schedule. 

• Present reviews of technical data to program leadership and technical staff. 

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior 
  relevant experience

• Minimum of 2 years of professional experience in design, analysis, simulation, and/or test experience with linear converters. 

• Experience with any of the following non-isolated converter topologies:  buck, boost, buck-boost.    

• Experience with design, analysis, and test with analog electronic design and analysis, including FET, BJT, and/or Op-amp circuits. 

Qualifications We Prefer

• Lab experience specific to power electronics and/or controls electronics 

• Demonstrated use of software tools for electrical circuit simulation and/or printed circuit board layout   

• Demonstrated ability to document designs and circuit performance verification 

• Understanding of fundamental power conversion concepts, components, and techniques 

• Demonstrated understanding of linear controls and motor drive techniques. 

• Basic understanding of commonly used power converter and/or motor drive control schemes 

• Design, analysis, and/or test experience with any of the following isolated converter topologies:  flyback, half-bridge, full-bridge, and/or push-pull.  Design scope will ideally include stability. 

• Experience with performing circuit card assembly-level power architecture trades, and/or with system-level power architecture trades, including power converter specification development experience. 

• Professional experience guiding Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation (direct experience with such tools is adequate to fulfill this requirement). 

• Familiarity with circuit simulator SIMPLIS, Saber and/or analysis tool Mathcad. 

• Experience with Mentor Graphics DxDesigner, and/or Hyperlynx. 

• Experience with acting as a liaison between program and functional management. 

• Experience with digital power control. 

• Experience with military specifications. 

• Experience with transformer and inductor design considerations. 

• Design experience with Electro-Magnetic Interference (EMI) concerns. 

• Design experience with voltages > 400V and/or power > 10kW. 

• Experience with program management tools such as Earned Value. 

• Experience with proposal development. 

• Ability to design to meet concerns of adjacent disciplines, such as thermal, structural, mechanical, reliability, and quality. 

• Ability to be a self-starter and be able to function in a dynamic environment. 

• Strong interpersonal, leadership, communication, and time management skills. 

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

This positions is onsite in Huntsville, AL and is eligible for relocation assistance.

Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?

Huntsville Location information: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing St. Louis is building the future ‒ creating innovative solutions that will define the next generation of aerospace. We are currently seeking Experienced or SeniorMechanical System Design Engineers to develop, maintain and modify air vehicle subsystems (Armament, Crew Systems, Environmental Cooling, Equipment, Fuel, Hydraulics, Landing Gear, Mechanisms and Thermodynamic) and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.

These positions are located in the St. Louis region and support current and emerging aircraft programs as part of the Air Dominance division in Boeing Defense Space and Security(BDS).

Positions will be located at one of the listed locations: Berkeley, MO; Hazelwood, MO; St. Louis, MO; St. Charles, MO; Mascoutah, IL.

Position Responsibilities:

Level 3

• Develop, integrate and document air vehicle subsystems requirements to establish the system design

• Develop, maintain and modify air vehicle subsystems and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle

• Perform, integrate analytical and test results to validate and verify systems and components meet requirements and specifications

• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals

• Develop new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort

• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements

• Work under general direction

Level 4

• Develop, integrate and document air vehicle subsystems requirements to establish the system design

• Develop, maintain and modify air vehicle subsystem and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle

• Lead performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications

• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals

• Assist with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements

• Work under minimal direction

Basic Qualifications (Required Skills / Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)

• Level 3: 5 or more years' related work experience or an equivalent combination of technical education and experience

• Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience

• Experience using NX / Teamcenter and familiarity with reading 2-D drawings

• This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment. An interim and/or final U.S. Secret Clearance Post-Start is required.

Preferred Qualifications (Desired Skills / Experience):

• Structural Design experience on military or commercial aircraft

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting

• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

Level 3: $103,700 - $140,300

Level 4: $126,650 - $171,350

Applications for this position will be accepted until Mar. 25, 2026

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing St. Louis is building the future ‒ creating innovative solutions that will define the next generation of aerospace. We are currently seeking Experienced or SeniorStructural Design Engineers to develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.

These positions are located in the St. Louis region and support current and emerging aircraft programs as part of the Air Dominance division in Boeing Defense Space and Security(BDS).

Positions will be located at one of the listed locations: Berkeley, MO; Hazelwood, MO; St. Louis, MO; St. Charles, MO; Mascoutah, IL.

Position Responsibilities:

Level 3

• Develop, integrate and document structural and interior payload system requirements to establish the system design

• Develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle

• Perform, integrate analytical and test results to validate and verify systems and components meet requirements and specifications

• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals

• Develop new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort

• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements

• Work under general direction

Level 4

• Develop, integrate and document structural and interior payload system requirements to establish the system design

• Develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle

• Lead performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications

• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals

• Assist with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements

• Work under minimal direction

Basic Qualifications (Required Skills / Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)

• Level 3: 5 or more years' related work experience or an equivalent combination of technical education and experience

• Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience

• Experience using NX / Teamcenter and familiarity with reading 2-D drawings

• This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment. An interim and/or final U.S. Secret Clearance Post-Start is required.

Preferred Qualifications (Desired Skills / Experience):

• Structural Design experience on military or commercial aircraft

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting

• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

Level 3: $103,700 - $140,300

Level 4: $126,650 - $171,350

Applications for this position will be accepted until Mar. 25, 2026

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing St. Louis is building the future ‒ creating innovative solutions that will define the next generation of aerospace. We are currently seeking Experienced or SeniorMechanical System Design Engineers to develop, maintain and modify air vehicle subsystems (Armament, Crew Systems, Environmental Cooling, Equipment, Fuel, Hydraulics, Landing Gear, Mechanisms and Thermodynamic) and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.

These positions are located in the St. Louis region and support current and emerging aircraft programs as part of the Air Dominance division in Boeing Defense Space and Security(BDS).

Positions will be located at one of the listed locations: Berkeley, MO; Hazelwood, MO; St. Louis, MO; St. Charles, MO; Mascoutah, IL.

Position Responsibilities:

Level 3

• Develop, integrate and document air vehicle subsystems requirements to establish the system design
• Develop, maintain and modify air vehicle subsystems and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle
• Perform, integrate analytical and test results to validate and verify systems and components meet requirements and specifications
• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals
• Develop new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort
• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements
• Work under general direction

Level 4

• Develop, integrate and document air vehicle subsystems requirements to establish the system design
• Develop, maintain and modify air vehicle subsystem and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle
• Lead performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications
• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals
• Assist with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements
• Work under minimal direction

Basic Qualifications (Required Skills / Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)
• Level 3: 5 or more years' related work experience or an equivalent combination of technical education and experience
• Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience
• Experience using NX / Teamcenter and familiarity with reading 2-D drawings
• This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment. An interim and/or final U.S. Secret Clearance Post-Start is required.

Preferred Qualifications (Desired Skills / Experience):

• Structural Design experience on military or commercial aircraft

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

Level 3: $103,700 - $140,300

Level 4: $126,650 - $171,350

Applications for this position will be accepted until Mar. 25, 2026

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing St. Louis is building the future ‒ creating innovative solutions that will define the next generation of aerospace. We are currently seeking Experienced or SeniorStructural Design Engineers to develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.

These positions are located in the St. Louis region and support current and emerging aircraft programs as part of the Air Dominance division in Boeing Defense Space and Security(BDS).

Positions will be located at one of the listed locations: Berkeley, MO; Hazelwood, MO; St. Louis, MO; St. Charles, MO; Mascoutah, IL.

Position Responsibilities:

Level 3

• Develop, integrate and document structural and interior payload system requirements to establish the system design
• Develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle
• Perform, integrate analytical and test results to validate and verify systems and components meet requirements and specifications
• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals
• Develop new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort
• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements
• Work under general direction

Level 4

• Develop, integrate and document structural and interior payload system requirements to establish the system design
• Develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle
• Lead performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications
• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals
• Assist with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements
• Work under minimal direction

Basic Qualifications (Required Skills / Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)
• Level 3: 5 or more years' related work experience or an equivalent combination of technical education and experience
• Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience
• Experience using NX / Teamcenter and familiarity with reading 2-D drawings
• This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment. An interim and/or final U.S. Secret Clearance Post-Start is required.

Preferred Qualifications (Desired Skills / Experience):

• Structural Design experience on military or commercial aircraft

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

Level 3: $103,700 - $140,300

Level 4: $126,650 - $171,350

Applications for this position will be accepted until Mar. 25, 2026

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Effector Digital Products (EDP) department designs digital electronic circuit cards and electronic units which are supported from proposal through transition to production. Our systems are subject to environments ranging from the frigid, sub-zero vacuum of space to the blistering heat of the desert floor, to the high pressures of the ocean depths.

The Digital, RF and Power Team is seeking a Digital Design Engineer II with digital electronics design and analysis skills to join our team. 

This position is 100% ONSITE in Tucson, Arizona.

What You Will Do

We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology to design digital electronics circuits that implement missile guidance, video and digital signal processing. Our technology base includes high-speed digital electronics, configurable logic, and homogeneous / heterogeneous multiprocessor designs.

The Digital Design Engineer II is responsible for the design, analysis, simulation, test, and integration of digital electronic modules and/or CCAs for Missile applications. The candidate should be experienced in all aspects of circuit card design including:

• hardware designs with processors

• FPGAs

• memory

• industry interfaces, such as PCIe, Ethernet, I2C, SPI, and UART

Qualifications You Must Have

• Bachelor’s Degree in Electrical Engineering, Computer Engineering or Electrical Engineering Technology

• Minimum of 2 years of engineering digital circuit design experience

• Experience in the development and design of electronic circuit designs, multi-assembly system/unit design, and/or processor designs

• The ability to obtain and maintain a US security clearance prior to the start date. U.S. citizenship is required as only U.S. citizen are eligible for a security clearance. 

Qualifications We Prefer

• Experience in taking a design concept from the block diagram or requirements level to development of a complete hardware design, and verification via test and integration

• Experience with PCB design process and expertise in tools used to design (schematic capture), analyze and simulate designs prior to hardware execution

• Experience using Mentor Graphics Design Creation (Siemens EDA) tools: DxDesigner, xDX Designer VX, and Expedition

• Experience using Mentor Graphics (Siemens EDA), PCB electronic circuit design software:

  • HyperLynx signal integrity

  • Power integrity

  • Analog simulation

  • Xpedition Enterprise (xPCB)

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• This position offers relocation

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role:

Employees who are working in Onsite roles will work primarily onsite . This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

This position is in beautiful Tucson, AZ. Tucson has a friendly, caring and laid-back atmosphere, combined with the innovation and energy of a metropolitan region and recognized as one of America’s 10 Best Small Cities. Surrounded by beautiful mountains, colorful Sonoran Desert landscape and majestic saguaro cacti, Tucson is blessed with some of nature’s best work. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson’s fantastic weather lets residents enjoy the outdoors year-round.

Tucson, AZ:

#LI-CV1

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing St. Louis is building the future ‒ creating innovative solutions that will define the next generation of aerospace. We are currently seeking Experienced or SeniorStructural Design Engineers to develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.

These positions are located in the St. Louis region and support current and emerging aircraft programs as part of the Air Dominance division in Boeing Defense Space and Security(BDS).

Positions will be located at one of the listed locations: Berkeley, MO; Hazelwood, MO; St. Louis, MO; St. Charles, MO; Mascoutah, IL.

Position Responsibilities:

Level 3

• Develop, integrate and document structural and interior payload system requirements to establish the system design

• Develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle

• Perform, integrate analytical and test results to validate and verify systems and components meet requirements and specifications

• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals

• Develop new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort

• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements

• Work under general direction

Level 4

• Develop, integrate and document structural and interior payload system requirements to establish the system design

• Develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle

• Lead performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications

• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals

• Assist with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements

• Work under minimal direction

Basic Qualifications (Required Skills / Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)

• Level 3: 5 or more years' related work experience or an equivalent combination of technical education and experience

• Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience

• Experience using NX / Teamcenter and familiarity with reading 2-D drawings

• This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment. An interim and/or final U.S. Secret Clearance Post-Start is required.

Preferred Qualifications (Desired Skills / Experience):

• Structural Design experience on military or commercial aircraft

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting

• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

Level 3: $103,700 - $140,300

Level 4: $126,650 - $171,350

Applications for this position will be accepted until Mar. 25, 2026

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Paragonix Technologies markets organ transportation devices that safeguard organs during the journey between donor and recipient patients. Our devices incorporate clinically proven and medically trusted hypothermic preservation techniques in a novel suspension system to provide unprecedented physical and thermal protection. Our product portfolio spans cardiac, thoracic, and abdominal preservation devices to improve donor organ quality and extend donor organ transport time. Paragonix also markets transplant services and organ screeningto the transplant community.

Position Overview: The Design Quality Engineer will play a crucial role in ensuring the quality and compliance of Paragonix's medical device products throughout the design and development lifecycle. The successful candidate will collaborate closely with cross-functional teams, including R&D, manufacturing, regulatory affairs, and quality assurance, to drive excellence in design control processes.

Primary responsibilities/authority will include:

• 
  
• Design Control Compliance: Implement and maintain design control processes in accordance with applicable regulatory standards (e.g., ISO 13485, ISO 14971, FDA QSR, MDR) to ensure the development of safe and effective medical devices.
  
• Risk Management: Lead and contribute to risk management activities throughout the design process, including the identification, assessment, and mitigation of potential risks. Work closely with the R&D team to integrate risk management into the design process.
  
• Failure Analysis: Assist in Post-Market Surveillance (PMS) initiatives, including failure investigation, record review, and data trending.
  
• Quality Planning: Develop and execute quality plans for new product development projects, outlining quality objectives, deliverables, and verification/validation activities.
  
• Design Input and Output:
  
  • 
    
  • Review and approve design inputs to ensure they are clear, complete, and aligned with user needs and regulatory requirements.
    
  • Validate that design outputs meet the specified design input requirements.
    
  
  
  
• Change Control: Manage design changes by assessing their impact on product quality, ensuring proper documentation, and obtaining necessary approvals.
  
• Verification and Validation:
  
  • 
    
  • Develop and execute protocols for design verification and validation strategies and acceptance criteria.
    
  • Collaborate with testing teams to ensure thorough testing of product designs.
    
  
  
  
• Collaboration: Work closely with cross-functional teams, including R&D, manufacturing, regulatory affairs, and quality assurance, to facilitate effective communication and collaboration throughout the product development process.
  
• Regulatory Compliance: Stay abreast of relevant regulations and standards and ensure that product designs comply with applicable requirements. Support regulatory submissions as needed.
  
• Continuous Improvement: Identify opportunities for process improvements within the design control system and contribute to the development and implementation of best practices.
  

Required Qualifications:

• 
  
• Bachelor's degree in engineering or a related field; advanced degree preferred.
  
• Minimum of 1-3 years of experience in a quality engineering role in the medical device industry.
  
• In-depth knowledge of design control processes, risk management, and quality management systems (ISO 13485, ISO 14971, FDA QSR).
  
• Strong technical skills related to product quality including VOE translation to Design Specs, Human Factors, CTQ Cascades, Design Characterization, Verification / Validation, Test Method Validation, Process Validation, Inspection Techniques and Statistics.
  
• Strong understanding of regulatory requirements for medical devices (FDA, EU MDR, etc.).
  
• Excellent communication and interpersonal skills, with the ability to collaborate effectively across functions.
  
• DFSS or DMAIC Black Belt Certified, ASQ Certified Quality Engineer (CQE) or Certified Quality Auditor (CQA) certification is a plus.
  

Other Requirements:

• 
  
• Electrical and mechanical background strongly preferred.
  
• Experience creating and analyzing charts in Minitab, JMP, or equivalent software a plus.
  
• Knowledge of Six Sigma, Lean, SPC, ASQ and/or ISO process controls a plus.
  
• Computer proficiency in MS office (specifically Excel).
  
• Effective verbal and excellent technical writing skills.
  
• Excels at generating and maintaining organized and accurate records.
  
• Excellent oral and written communication skills in English.
  
• Able to travel domestically and internationally as required (

Open date: August 27, 2025

Next review date: Thursday, Mar 12, 2026 at 11:59pm (Pacific Time)

Apply by this date to ensure full consideration by the committee.

Final date: Wednesday, Aug 26, 2026 at 11:59pm (Pacific Time)

Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.

UC Berkeley Extension (UNEX), the continuing education branch of the University of California, Berkeley, has been building bridges between UC Berkeley and the public since 1891. UNEX serves the professional and continuing education goals of thousands of people each year and plays an essential part of the University mission to: extend the research and scholarship of UC Berkeley to a global community; increase access to higher education for non-traditional, online, and international students; and improve the workforce. UC Berkeley Extension is a part of the division under the leadership of the Dean of Extended Education that also includes Berkeley Summer Sessions, Berkeley Study Abroad, and Osher Lifelong Learning Institute.

UC Berkeley Extension invites applications for a pool of qualified, dynamic instructors with a commitment to professional and continuing education in UX Design, UI Design, and UX Research to teach one or more online courses each year for our Arts and Humanities department.

Courses are offered online:

• 
  
• Online instruction is delivered asynchronously through our learning management system (Canvas) or through synchronous live lectures (Zoom).
  
• Most synchronous live online lecture courses are offered in the evening and on the weekend (U.S.A. Pacific Time).
  

We are seeking qualified applicants who possess current subject matter expertise and/or teaching knowledge in (but not limited to) the following course subjects. For program and course descriptions, please refer to the departmental link below.

User Experience and User Interface (UX-UI) Design

• 
  
• Accessibility in UX Design
  
• Algorithmic Thinking & System Flows
  
• Content Design
  
• Diagramming and Prototyping for UX
  
• Essentials of User Experience (UX) Design
  
• Information Architecture
  
• User-Interface (UI) Design
  
• UX Design Portfolio
  
• UX for Emerging Technologies: Augmented Reality (AR), Mixed Reality (MR), and Artificial Intelligence (AI)
  
• UI for Emerging Technologies: Voice User Interface (VUIs)
  

User Research Methods

• 
  
• Qualitative User Research for UX
  
• Quantitative User Research for UX
  

Other UX-UI Design and UX Research Related Topics

(please specify in your cover letter)

The department seeks candidates who can support the success of all students through inclusive curriculum, classroom environment, and pedagogy. Specific duties and expectations will vary depending on the method of instruction including: Synchronous Live Online (Zoom) or Asynchronous Online (Fixed Date).

• 
  
• For synchronous instruction (live online courses), duties include but are not limited to: syllabus development; assignment development; lesson planning for class meetings; preparing and submitting required texts and course materials; reviewing and updating Canvas course site; and delivering lectures, presentations, and learning activities for all required hours of instruction.
  
• For asynchronous instruction (fixed date online courses), duties include but are not limited to: reviewing the syllabus and pre-populated online course content; learning and utilizing Canvas classroom management tools; and requesting any training needs from the Program Director or Department Director.
  
• For all instruction (regardless of course format) duties include but are not limited to: completing required trainings as mandated by the UC Presidential policies; responding to student questions and learning needs in a timely manner; grading student assignments and posting final student grades to the instructor portal in a timely manner; utilizing University-approved course support platforms including the Canvas Learning Management System, Zoom, Instructor Portal, Google Workspace, etc.; reviewing and following University and departmental policies, logistics, and other guidelines as published on the departmental Instructional Resource Site; and responding to other requests from the Program Director or Department Director in a timely manner.
  

UX-UI Design and UX Research Program and Courses: public/category/ ?method=load&certificateId=29918624&selectedProgramAreaId=11461&selectedProgramStreamId=15551

• 
  
• Bachelor's degree or equivalent international degree required.
  

• 
  
• 5 or more years of professional industry work experience since degree, or 5 or more years of teaching experience since degree.
  
• 
  U.S.A. Residency and U.S.A. Work Authorization: All work must be performed in the United States, whether in person or online. For applicants who are not US citizens or permanent residents, a valid US work authorization is required for the duration of employment. Applicants should not expect the department to sponsor a work visa on their behalf.
  

• 
  
• Advanced degree in UX Design preferred.
  
• 5 or more years of professional industry work experience in UX design, artificial intelligence (AI), voice design, web design or development, product design, graphic design, interaction design, human computer interaction, human ergonomics, computer science, engineering/programming, cognitive science, psychology, anthropology, or sociology.
  
• Experience in User Research Methods (quantitative/qualitative).
  
• Proficiency in design thinking methodologies and their application to user-centered design challenges.
  
• Proficiency in one of the following for design tools: Figma, InVision, Miro, Mural, UXPin, or AI apps and plugins.
  
• Proficiency in Augmented Reality (AR), Mixed Reality (MR) and Virtual Reality (VR)
  
• Proficiency in one of the following for Voice User Interface (VUI) design courses: Voiceflow, Alexa Skill Kit (ASK), Action Builder (for Google Assistant), Mycroft, Web Speech API, etc.
  
• Experience writing technical content and project specs.
  
• Knowledge of existing and new technologies and constraints, including knowledge of artificial intelligence and its integration with user experience design.
  
• Teaching, training or coaching experience in the course subject, within a U.S. corporate environment or at a U.S. college/university institution.
  
• Experience in creating syllabi, learning objectives, lectures/presentations, learning activities, assignments, assessments, exams, and quizzes.
  
• Experience teaching online and/or developing academic content for online courses.
  
• Ability to convey conceptual and complex ideas and information.
  
• Ability to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.
  
• Effective verbal/written communication and presentation skills (English).
  
• Effective organizational skills with attention to detail.
  
• Ability to collaborate with colleagues and work within a team environment
  
• Proficiency in (or willingness to learn) instructional and other technology, such as: Learning Management Systems (Canvas); lecture/presentation capture applications (Panopto); online video conferencing (Zoom); Microsoft Office (Word and PowerPoint); file sharing (Google drive or Dropbox); and Google Workspace tools (email, calendar, docs, sheets, slides, etc).
  

• Curriculum Vitae - Your most recently updated C.V.

  
  

• Cover Letter - In your cover letter, please include:
  
  1) the top 3 course subject(s) you are applying for within the UX-UI Design and/or User Research disciplines;
  
  2) a link to your professional website that includes your UX-UI Design and/or User Research portfolio with samples of your work; and
  
  3) please discuss prior teaching experience, teaching approach, and other/future UX-UI Design and/or User Research teaching interests. This can include, for example, specific efforts, accomplishments, and future plans to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.

  
  

• 
  
• References are requested from candidates at the interviewing stage, and references are only contacted for finalists.
  

Help contact:

UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.

The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.

For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.

In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.

As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.

Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.

As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.

• 
  
• "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
  
• UC Sexual Violence and Sexual Harassment Policy
  
• UC Anti-Discrimination Policy
  
• APM - 035: Affirmative Action and Nondiscrimination in Employment
  

Open date: October 22, 2025

Most recent review date: Thursday, Nov 6, 2025 at 11:59pm (Pacific Time)

Applications received after this date will be reviewed by the search committee if the position has not yet been filled.

Final date: Saturday, Aug 1, 2026 at 11:59pm (Pacific Time)

Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.

The Jacobs Institute for Design Innovation in the College of Engineering at the University of California, Berkeley, is seeking qualified temporary instructors to teach undergraduate courses, graduate courses, and/or special topics workshops should an opening arise in the Fall and Spring semesters, or for the Summer term. Applicants should accurately list their specializations so they can be properly evaluated as course needs arise; the existence of this pool does not guarantee that a position is available.

Lecturers supervise student design projects, give lectures, prepare assignments and project topics & deliverables, hold regular office hours, prepare exams or hold reviews, give design advice, and submit final grades.

In addition to lecturers, we also seek Teacher Special Programs (TSP) instructors, should an opening arise. The TSP's principal responsibilities can range from teaching a short course, providing a lecturer with industry expertise, participating in design critiques during a course, teaching at Jacobs Institute boot camps or workshops, or contributing to major curriculum development.

About the Jacobs Institute: Made possible by a $20-million commitment from the Paul and Stacy Jacobs Foundation, the Jacobs Institute for Design Innovation is UC Berkeley's interdisciplinary hub for learning and making at the intersection of design and technology. We see design and emerging technologies as integrally linked: technology opens possibilities and extends the reach of design, while design links new technologies with human experiences and ensures that innovation truly benefits people and communities. Bringing together technical depth, design methodology, and a focus on societal impact, we aim to educate students who understand both the under-the-hood details that make something work and the big-picture context that makes something matter. We accomplish these goals through a suite of offerings that include curricular, co-curricular and public programs.

Core programs within the Jacobs Institute include:

• 
  
• A professional Master of Design (MDes) degree, offered jointly by the College of
  Engineering and College of Environmental Design;
  
• The Berkeley Certificate in Design Innovation, an undergraduate certificate
  offered in partnership with the Haas School of Business, College of Letters & Science, and College of Environmental Design;
  
• A curriculum of ~15 design-focused Design Innovation (DES INV) undergraduate and graduate courses offered Fall, Spring and Summer, for which the institute recruits lecturers and faculty;
  
• A makerspace staffed by professional and student workers which is accessed by 1200+ students each semester;
  
• Mentorship and co-curricular programming for students, such as the Berkeley - Engineering Design Scholars and Innovation Catalysts programs;
  
• Support for 15+ design and technology courses from affiliated campus departments, ~ 30+ clubs, and ~ 8 Decal courses each semester by offering access to high quality teaching, meeting and event space;
  
• Public events and speaker series;
  
• Partnerships with companies and international universities.
  

The Jacobs Institute is housed in Jacobs Hall, a 24,000 square foot building equipped with design studios and equipment rooms featuring the latest in digital fabrication technologies.

Institute:

Labor Contact:

A Bachelor's Degree (or equivalent international degree) is required at time of application.

For Lecturers: Five years of experience in industry or a research institute, or advanced degree is required by the start of the appointment.

For TSPs: Two years of experience in industry or a research institute, or advanced degree is required by the start of the appointment.

For Lecturer positions: A higher level degree and/or prior expertise in teaching in either design or engineering schools at the undergraduate and/or master's level. Also desirable are a strong track record in developing and implementing new and experimental methods of delivering education and hands-on learning, and experience working with students from a range of disciplines.

For both Lecturer and TSP Positions: Experience working in industry and/or a research institute in relevant subject areas.

• Cover Letter

  
  

• Curriculum Vitae - Your most recently updated C.V.

  
  

• Statement of Teaching - Please discuss prior teaching experience, teaching approach, and future teaching interests. This can include, for example, specific efforts, accomplishments, and future plans to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.

  
  

• 2 required (contact information only)

Help contact:

UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.

The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.

For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.

In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.

As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.

Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.

As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.

• 
  
• "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
  
• UC Sexual Violence and Sexual Harassment Policy
  
• UC Anti-Discrimination Policy
  
• APM - 035: Affirmative Action and Nondiscrimination in Employment