Fluted Panel Size Jobs in Usa

Field Senior Foreman – Glazing & Metal Panels

Overview

We are seeking a skilled Field Senior Foreman to lead on-site glazing and metal panel projects. The ideal candidate combines hands-on construction experience with strong leadership, guiding crews to complete work safely, efficiently, and to high-quality standards. While experience in glazing or metal panels is preferred, candidates from other construction trades with field management experience are encouraged to apply.

Key Qualifications

• Hands-on experience leading construction crews in commercial projects
• Background in construction science, engineering, or a related field is preferred
• Prior roles as a senior foreman, project engineer, or junior superintendent are highly desirable
• Ability to read and follow shop drawings accurately
• Familiarity with Bluebeam, Excel, and other construction software; Power BI is a plus
• Strong written and verbal communication; Spanish-speaking is an advantage

Responsibilities

Safety & Compliance

• Maintain and enforce safety protocols, OSHA standards, and project-specific requirements
• Lead daily safety briefings, toolbox talks, and Job Hazard Analyses
• Ensure proper use of PPE, rigging, lifting, and material handling
• Address unsafe conditions immediately

Crew Leadership & Labor Management

• Oversee both permanent employees and temporary labor assigned to the site
• Assign daily tasks and crew sizes to meet production and scheduling goals
• Foster a professional and disciplined work environment

Project Execution & Quality

• Monitor labor performance, manage efficiency, and reduce rework or material waste
• Inspect work to ensure compliance with plans, specifications, and manufacturer standards
• Identify and correct deficiencies promptly

Coordination & Communication

• Serve as the primary point of contact for the field team on glazing/metal panel work
• Collaborate with project management, general contractors, and other trades to maintain workflow
• Communicate progress, issues, and changes effectively

Material & Equipment Oversight

• Verify material deliveries and ensure proper storage and handling
• Coordinate staging, sequencing, and correct use of lifts, tools, and equipment

Documentation & Reporting

• Maintain accurate daily reports, time tracking, and field notes
• Document safety, quality, or schedule issues and provide updates for project management

Mentoring & Accountability

• Train and guide crew members on proper installation techniques
• Set clear expectations for quality, productivity, and conduct
• Address performance issues and escalate as needed

Ideal Candidate

• Proven experience leading construction crews on commercial projects
• Strong knowledge of glazing and metal panel installation or related construction work
• Dedicated to quality, safety, and efficiency
• Capable of mentoring team members and driving project success

Reach out to for immediate consideration.

Power the data centers, hospitals, and other mission-critical facilities of tomorrow-designing both rugged rental products and stationary generator-set packages that keep them online. As an Electrical Project Engineer, you'll work in a unique manufacturing and dealer environment, leveraging expert-level AutoCAD and Inventor skills to craft low- and medium-voltage AC layouts, DC controls, and the logic that ties multiple gensets into advanced paralleling switchgear and smart control panels. Juggle multiple high-impact projects, troubleshoot in the test cell, and serve as the go-to authority for production teams and customers alike-making an outsized impact alongside a collaborative squad of engineers, sales pros, and suppliers.

• Produce comprehensive wiring schematics, conduit schedules, and panel layouts in AutoCAD and Inventor for diesel and natural gas gensets, ensuring every reference, layer, and legend is unambiguous.

• Size and specify breakers, relays, PLC/HMI hardware, and interface circuits that integrate seamlessly with low to medium-voltage paralleling switchgear and DC control systems.

• Audit project drawings, vendor prints, and specifications against UL, NFPA 70/110, ISO, and customer standards; log variances and close them before release.

• Diagnose elusive startup, commissioning, and controls problems for technicians through root-cause-based recommendations that feed back into design libraries to improve the product.

• Translate application questions into concise recommendations and solutions and document in formal engineering notes.

• Maintain production continuity
  • Follow standard protocols and proven design protocols to ensure consistent high-quality products that meet or exceed customer requirements.
• Manage the submittal dossier
  • Assemble, index, and track all drawings, studies, and data sheets through the approval cycle; document every revision for full traceability.
• Leverage Caterpillar engineering resources
  • Retrieve and interpret factory application guides, PID data, and software updates; ensure the latest revisions are embedded in each project.
• Enable precise estimating
  • Deliver dimensioned one-lines, BOMs, and labor take-offs to the Sales team so quotes reflect real scope, margin, and risk.
• Design for the exceptional case
  • Apply first-principles analysis to bespoke components or control sequences required by unique site conditions or regulatory environments.
• Control the critical path
  • Use tools and milestone checklists to keep engineering actions on time, document slippage causes, and propose corrective actions proactively.
• Adapt as requirements evolve
  • When priorities shift, re-baseline drawings, calculations, designs, and priorities so the entire team works from a single source of truth.

If precision, thorough documentation, and methodical problem-solving are how you create value, this role will let you practice your craft at a high level of electrical engineering discipline.

Education & Experience

• B.S. in Electrical Engineering (preferred) - or at least ten years of hands-on experience in the engine-driven power-generation industry or a closely related technology field with design engineering experience for 5+ years.
• Military veterans are strongly encouraged to apply.

Technical Expertise

• Proficiency with Caterpillar toolsets (CAT ET, CAT Monitoring Software, SIS Web, TMI, EDDC) is highly desirable.
• Working knowledge of diesel- and natural-gas generator sets is preferred; familiarity with lithium-ion energy-storage systems is a plus.
• Thorough understanding of relevant codes and standards-NFPA 70/110, NEC, NEMA, UL, IEEE.
• Expert-level 2D drafting in AutoCAD; 3D modeling experience required (Inventor preferred, or comparable platforms accepted).
• Exposure to generator paralleling switchgear, remote-fuel supply, and remote-cooling systems is preferred.

Other Requirements

• Valid driver's license with a clean record (no more than two minor violations in the last three years and no major violations in the last five years). A motor vehicle driving record check will be conducted for the final candidate.

Altorfer Inc. offers an industry leading compensation and benefit package:

* Health, Dental, Vision, Disability, and Life Insurance
* 401(k)
* Paid Holidays
* Paid Parental Leave and Funeral Leave
* Paid Time Off: Prorated 80 hours of PTO + 1 Floating Holiday
* Education Assistance
* Personal Tool Insurance, and Safety Equipment Reimbursement
* Voluntary Benefits: Supplemental Insurance, Accident, Critical and Hospital Indemnity Insurance, Legal Assistance and Identity & Fraud Protection

Salary Range: $60K to $120K annually

Work is normally performed both indoors and outdoors with moderate noise conditions. Limited exposure to all weather conditions is associated with this position. Physical requirements may include speaking, listening, writing, typing, reaching, pushing, pulling, lifting, carrying, sitting for extended periods, and managing stress. Occasionally required to walk or stand for short durations on manufacturing floors or job sites. Job hazards may include tripping, slipping, falling, jobsite hazards, hand injuries, driving related hazards, equipment movement, overexertion due to stress and fatigue. Required to follow all safety protocols and wear appropriate personal protective equipment depending on the environment or location. The noise level in the work environment is usually moderate to high. The noise level in the office environment is usually moderate to low. Must be flexible to work varying schedules and hours as needed. Occasional travel may be required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Why Work for Altorfer?

At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third-generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is critical to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family-valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with.

Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations.

Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.

Based onsite at Rocket Lab in Long Beach, California, the Electrician is responsible for electrical maintenance, infrastructure upgrades, and electrical improvement projects at Rocket Lab's headquarters and Engine Development Center.

What You'll Get To Do:

• Serve as the primary electrical subject matter expert for HQ and the Engine Development Center.
• Plan, scope, and execute electrical infrastructure projects including power distribution, panel upgrades, machine installs, lighting systems, and equipment tie-ins.
• Coordinate directly with internal customers (Manufacturing, Engineering, EHS, Production, IT) to define electrical requirements, project timelines, shutdown windows, and commissioning plans.
• Perform installation, troubleshooting, repair, and upgrade of building electrical systems (120V480V, 3-phase systems).
• Read and interpret electrical schematics, single-line diagrams, panel schedules, and construction drawings.
• Install and modify conduit systems; proficiently bend conduit from " to 1 " using manual tube benders (EMT preferred; rigid and flexible conduit experience a plus).
• Size conductors, breakers, transformers, and distribution equipment in accordance with NEC and local code.
• Support equipment installations including procurement, layout planning, power drops, disconnects, and final energization.
• Manage electrical work orders through JIRA and prioritize based on production impact and safety risk.
• Ensure all electrical work complies with NEC, OSHA, and local building code requirements.
• Provide oversight of contractors performing electrical work and verify work meets Rocket Lab standards.
• Assist with broader facilities maintenance tasks as required, including HVAC support, plumbing repairs, painting, minor construction, furniture relocation, and other general facilities maintenance activities to support site operations.

You'll Bring These Qualifications As A Senior Electrician:

• 8+ years of electrical maintenance experience in any of the following industries: aerospace, automotive, medical device, or a heavily regulated manufacturing facility.
• High School Diploma, GED OR 12+ years of experience in electrical maintenance in lieu of diploma.
• Experience with facilities systems and improvement projects.

You'll Bring These Qualifications As A Master Electrician:

• 10+ years of electrical maintenance experience in any of the following industries: aerospace, automotive, medical device, or a heavily regulated manufacturing facility.
• High School Diploma, GED OR 14+ years of experience in electrical maintenance in lieu of diploma.
• Experience with facilities systems and improvement projects.

These Qualifications Would Be Nice To Have:

• Licensed electrician or certified electrical professional is highly preferred.
• Experience with managing a cleanroom.
• Capable of solving complex problems with little to no supervision in a timely manner.

Additional Requirements:

• Ability to remain focused while working in hazardous environments, while wearing appropriate PPE
• Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position
• Able to lift up to 25lbs. unassisted
• Must be able to climb ladders and be comfortable working in tight spaces.
• Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls.
• Must be able to walk or stand for extended periods 8 hours min
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces
• Must be able to work at heights
• Must be able to operate scissor lifts/boom lifts

• Set up, operate, and monitor large grinding machines used for processing materials
• Adjust machine settings to accommodate different types of materials and achieve desired output sizes.
• Load recyclable materials into the grinding machine, ensuring proper placement and securing of materials to prevent blockages or malfunctions.
• Perform routine maintenance and cleaning of the grinding machine to ensure optimal performance and prevent downtime and coordinate with maintenance personnel for more complex repairs or service needs.
• Identify and address any mechanical issues or wear and tear on the equipment.
• Monitor the quality of the ground materials, ensuring they meet specifications and standards for further processing.
• Conduct periodic checks verify the consistency and quality of the output.
• Follow all safety protocols and guidelines while operating the grinding machine and handling materials and report any safety hazards or incidents to the supervisor and participate in safety training as required. Always wear PPE
• Maintain accurate records of production volumes, equipment maintenance, and any issues encountered during the grinding process.
• Diagnose and resolve minor operational issues with the grinding machine, including jams, misalignments, or malfunctions.
• Participate in process improvement initiatives to enhance the efficiency and effectiveness of the recycling operation.
• Suggest and implement changes to optimize machine performance and reduce waste.
• Continual communication and collaboration with team members, team leads, and Supervisors.
• Report to work at the scheduled time, work as scheduled and is seldom absent from work.
• This job description is intended to provide an overview of the responsibilities and requirements of the position. It is not an exhaustive list. Furthermore, nothing in this job description restricts managements right to assign or reassign duties and responsibilities to this position at any time.

Knowledge/Skills/Abilities

• Proficiency in operating and maintaining large grinding machines and other related equipment.
• Strong problem-solving skills and the ability to troubleshoot machine issues.
• Good understanding of safety procedures and environmental regulations related to recycling processes.
• Experience with specific types of recycling materials or grinding processes relevant to the industry preferred
• Willingness and ability to work a 12 hour shift schedule with evening/weekend work (Week 1:M/T/F/Sa, Week 2: Su/W/TH).

Education/Experience/Certifications/Licenses

• High school diploma or equivalent preferred
• Forklift Certification through King Plastic Corp required

Typical Physical and Mental Demands/Work Environment: Work is primarily performed in a manufacturing facility and occasionally seated in an office. May involve working under deadlines. Requires: broad range of physical and mental activities to perform the duties and responsibilities of the position:

• You will be required to stand and walk for 11+ hours/day, drive a forklift for 0.5+ hours/day, constant engage in overhead reach, forward reach, climb, bend, kneel, squat, stoop, twist, use manual dexterity, make position changes, push and pull using both arms and legs, lift and carry 525 lbs., wear protective equipment, repetitive motion, maintaining physical endurance, demonstrate attention to detail, use memory recall, effective communication, adaptability, depth perception, color vision, visual acuity, frequent problem solving, lift and carry 2651+ lbs., and hear clearly. Typical tools, equipment, and machinery utilized include saws (table, panel, and radial arm), routers, grinders, manual and power hand tools, overhead lift equipment, micrometers, tape measure, scales, air hoses, calculators, and computers. The position involves full shifts in an environment with extreme temperatures exceeding 100F during summer months and exposure to noise and dust.

Position requires full shifts in an environment with extreme temperatures (>100? in summer months): Yes

Position requires full shifts in an environment with exposure to noise and dust: Yes

Typical tools, equipment and machinery utilized: saws (table, panel and radial arm), routers, grinder, manual and power hand tools, overhead lift equipment, micrometers, tape measure, scales, air hoses, calculator, and computer: yes

Position requires operating a power fork truck: Yes

PI68d0d1d032e1-26289-39745171

Enjoy a balanced MondayFriday schedule with no call, nights, or weekends while delivering meaningful care in a dynamic outpatient setting. UT Health Houston seeks a Family Medicine Physician for a new role in its growing academic department. This 100% outpatient position offers clinical variety and the ability to build and manage your own patient panel. Connect with us today to learn more.

Opportunity Highlights

• Enjoy an exceptional work-life balance with MondayFriday hours, 85, and no call, nights, or weekends
• Provide 100% clinical care in a fast-paced, adaptable outpatient setting
• Deliver compassionate, high-quality care to a diverse and underserved population
• Join a new position within a renowned academic medical department
• Thrive in a supportive work culture that promotes flexibility and team collaboration
• Experience clinical variety without sacrificing schedule consistency or personal time
• Practice in a 100% outpatient role with no inpatient responsibilities
• Focus 100% on direct patient care and build a long-lasting patient panel

Community Information

A leading cultural and culinary destination, Greater Houston is a vibrant region that thrives as the fourth-largest city in the United States. Youll find world-class dining, arts, shopping, and nightlife. Enjoy plenty of outdoor recreation, numerous Gulf Coast beaches, myriad water activities, and no state taxes in Texas.

• Houston is a Best Place to Live and Retire in America (US News)
• Excellent Livability Score from Area Vibes, with A grades for Amenities, Commute, Cost of Living, Housing, and Health & Safety
• Beautiful homes in inviting neighborhoods + excellent schools a wonderful place for families and individuals alike
• Home to professional sports teams and myriad restaurants with cuisine from numerous countries

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Rochester, NY

SUMMARY: A program designed to train a skilled worker through a combination of on-the-job training and classroom instruction to become a Maintenance Technician at American Packaging Corporation. Maintenance Technicians are responsible for electrical and mechanical systems in the facility, which will include troubleshooting and routine maintenance activities. Throughout this program, they will learn to troubleshoot and repair equipment problems that affect productivity of the manufacturing group as well as plant facilities and subsystems. They will learn to be involved with the process improvements providing input in production problem solving.

Approval Process: Applicants will be interviewed and chosen based on their experience, knowledge, and overall work history. The chosen finalists will be required to take and pass an aptitude test.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

Duration: 3-4 years for completion

Classroom Training: Several courses required through local school, such as Electrical, Industrial, Mechanical and Machining courses.

Hours of Work: As needed for class schedule, must be flexible.

On the Job Training:

A. Tool and Supply Room (~200 hrs)

Learn size of wire conduit and bending of conduit, use of tools and how to determine the size of load safety.

B. Lighting (~200 hrs)

Replacement of incandescent lamps and hot cathode fluorescent tubes and starters. Repair of fluorescent fixtures, replacing ballast, socket and wiring, code requirements. Repair of LED fixtures, replacing drivers and troubleshooting.

C. Trouble Shooting AC Wiring (~300 hrs)

Learn to locate and repair contactor problems, replacing contacts and contactor. Locate and replace blown fuses. Check and repair limit switches, push buttons, etc.

D. Special Circuits AC (~500 hrs)

Learn to read wiring diagrams. Operation of special control circuits, time delay switches, electrical braking.

E. Direct Current Machinery (~500 hrs)

Learn to locate and repair direct current motor troubles in fields, armatures, bearings, brush holders, and commutators. Knowledge of variable speed DC drives. Repair and maintenance of DC contactors and field control.

F. General Wiring (~500 hrs)

Learn proper handling and installation of power feeding, wiring, fuse panels, breakers, etc. Estimate load requirements. Code requirements. Install general wiring.

G. Instruments (~100 hrs)

Learn proper use and care of voltmeter, ammeter, watt meter, oscilloscope and megger, etc.

H. Computerized Controls (~600 hrs)

Programmable logic controllers: reading diagrams and schematics; maintaining and troubleshooting.

I. Care, Use and Safety of Tools and Equipment (~500 hrs)

Hand tools, power tools, machines and power equipment, ladders, scaffolding and hoists.

J. Machine Repair (Mechanical) (~1500 hrs)

Assembly and disassembly, bearings, power transmission, construction, rigging, lubrication. Safety.

K. Bench Work and Machinery (~300 hrs)

Lathes, milling machines, grinding machines, drill press, power saw, etc. Safety.

L. Pipefitting (~300 hrs)

Layout, installation, repair, replacement, pumps and compressors, valves and controls. Safety.

M. Welding (~500 hrs)

Protective clothing and equipment, burning and cutting, controls and gauges, electric arc welding, properties of metals. Safety.

QUALIFICATION REQUIREMENTS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

High School Diploma or Equivalent. Active, regular Full-time employee of American Packaging Corporation. Part-time or temporary employees of APC are not eligible to participate in this program.

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, technical procedures, or instructions. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from others.

MATHEMATICAL SKILLS

Ability to calculate figures and amounts such as proportions, percentages, area, circumference and volume. Ability to apply concepts of basic algebra and geometry.

REASONING ABILITY

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

PHYSICAL DEMANDS

The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand, walk, sit, and talk or hear. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include color vision.

WORK ENVIRONMENT

While performing the duties of this job, the employees is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

• 
  
• Coaxial cables (many different size and connectors, flex and solid center conductors)
  
• Industrial automation connectors (panel connectors and ferrules, drive connectors, motor connectors, cutting and terminating equipment)
  
• MS connectors (all kinds of variations and sealing operations)
  
• Commercial electronics connectors (mini and micro fit on medium speed termination equipment)
  
• Hi flex cable assemblies (WL Gore / LEONI cores and PTFE sleeves with heat-shrink and special clamps)
  

• 
  
• Fabricates and tests cable assemblies following blueprints specifications, using measuring instruments, hand tools, and machines.
  
• Reads and interprets blueprints, work orders and specifications to define sequence of operations, type & size of cable fittings required, quantity and finished dimensions.
  
• Measures & cuts cable to required length, considering cable stretch metal flow resulting from swaging operations, using cable cutter or saw.
  
• Selects installs dies, jigs, shims, or other accessories in swaging machine, using hand tools.
  
• Assembles fittings onto cable in specified location.
  
• Positions fitting cable between dies of swaging machine and depresses pedal to activate machine that swages fittings onto cable, turning cable assembly by hand as fitting is swaged onto cable.
  
• Verifies dimensions of cable assembly position of fittings, using measuring instruments.
  
• Tests holding capacity of cable assembly, using proof loading machines.
  
• Repairs reworks cable assemblies as required.
  
• May form loops or splices in cables, using clamps fittings, or by reweaving cable strands.
  
• May apply lubricants protective coatings to cable assemblies.
  
• May operate crimping machine.
  
• May mark identifying information on cable assemblies.
  
• May fabricate cable templates.
  
• Performs all work in accordance with established safety procedures.
  
• Maintain shop disciplines (housekeeping, clean as you go and 5S)
  
• Work from assembly drawings, 3-D models, and other general documentation to carry out assembly procedures.
  
• Perform basic assembly operations to exacting tolerances
  
• Use precise measuring instruments
  
• correct dimensional tolerance and check finishing specifications.
  
• Detect defective parts, unusual conditions or operating difficulties and report to proper supervision.
  
• Complete necessary documentation to ensure quality and production requirements.
  
• Be an active participant in team meetings to communicate and help resolve any cost, quality, or production issues.
  
• Assist engineering with R&D.
  

• 
  
• Must have problem solving abilities.
  
• Must be able to read blueprints and interpret complicated specifications.
  
• Must have extensive understanding of complex mechanical assembly, cable assembly and module assembly.
  
• Understand and operate various hand and power tools involved in assembly and cable making.
  
• Willingness to assist assembly team with other duties as required.
  
• Possess good communication and interpersonal skills; be able to independently solve problems while interacting with various teams and teammates on daily processes and flow.
  
• Must be capable of multi-tasking various duties throughout the day, have a positive attitude with an ability to be versatile and flexible.
  
• Continuous mental and visual attention is necessary to perform various duties requiring constant alertness and activity.
  
• High school diploma or GED.
  
• Typically requires 1+ years wiring experience
  
• Must be a U.S. Citizen
  

Cleaver Brooks Sales and Service is looking for a Senior Boiler Controls Technician to join our team in Dallas, TX. The Senior Boiler Controls Technician is responsible for wiring, firing, and testing boilers in the shop & field. This position is responsible for the readiness of the customer equipment.

Any salary estimation specified in this job board may or may not be aligned with our organization’s pay philosophy. Apply to connect with a Talent Acquisition Partner who can provide you more details!

Job Location: Dallas, TX

Signing Bonus Details:

• Qualified Tech candidates with 1-5 years of relevant boiler experience will receive a $2500 signing bonus! ($1500 paid upon hire, and $1000 paid after 90 days)
• Qualified Techs with +5 years of relevant boiler experience will receive a $5000 signing bonus! ($3000 paid upon hire, $2000 paid after 90 days)

Essential functions:

• Wire all controls and motors for watertube and firetube boilers and auxiliary equipment.
• Rebuild control valves and regulators.
• Build and test control panel using Engineering wiring schematic and layout.
• Build and test fuel skids using Engineering wiring schematic and layout.
• Build and test condensate tanks and deaerators.
• Trim out firetube and watertube boilers.
• Perform start-up of Rental boilers in field.
• Assist departments as required.
• Reads blueprints and wiring schematics.
• Able to trouble shoot, fire, and set combustion on all types of boilers, including but not limited to boiler with superheaters, desuperheaters, and economizers.
• Determines valve trim, regulator size and spring, oil gun length and size, and all other parts and accessories needed to fire any boiler.
• Able to fire and set combustion on boiler with all types of pneumatic controls.
• Able to fire and set combustion on boiler with all types of electrical controls.
• Able to train other employee’s on the operation and controls of boilers.
• Maintain condition of and inventory of all tools and monitors.
• Apply intellect, creativity, adaptability, judgment, and management skills to achieve required results.
• Ensure duties and company projects are accomplished in an efficient and cost effective manner.
• Support peers and management with internal and external projects.
• Adhere to company policies.
• Other duties as assigned.

Basic Requirements:

Education:

• High School diploma or equivalent

Experience:

• Minimum of two (2) years of electrical troubleshooting/ technical background.

Other Requirements:

• Must possess a valid drivers license with a safe driving record
• Must be able to read and work from blueprints and schematics.
• Must be able to follow written and verbal instructions.
• Mechanical and electrical background a must.
• Must have the ability and knowledge to trouble shoot systems without the appropriate schematic.

Physical Skill & Effort:

Requires stooping, climbing, bending, crawling, and lifting 50 pounds, working in confined and elevated areas, and prolonged standing.

Working Conditions and Hazards:

Some work in physical plant environment where plant orientation may be required and safety precautions are required. May encounter some unpleasant working conditions of brief duration. Little to no contact with hazardous conditions.

Benefits of being a Cleaver-Brooks Sales & Service Employee:

• Competitive salary
• Comprehensive benefits, including medical, dental, vision, maternity support program, discounted virtual physician visits, voluntary medical benefits (Critical Illness, Hospital Care, and Accidental Injury), FSA, HSA, life insurance, short term and long-term disability
• Cash matching 401(k) plan
• Employee assistance program (EAP)
• Pet insurance
• Employee discount program
• Tuition assistance
• Paid time off and 11 paid holidays

Who is Cleaver-Brooks Sales & Service:

Cleaver-Brooks Sales and Service, Inc. (CBSS) is a market leader in providing fully integrated boiler and burner systems. CBSS offers a full range of capabilities from: new equipment, installation, rentals, retrofits, repairs, parts, and service. We can deliver, install, and upgrade boiler room solutions that improve efficiency, reduce cost, and optimize space. CBSS delivers the most efficient, reliable, safe, and environmentally sustainable solutions that differentiate us in the marketplace.

We are a 24/7 customer driven operation.

This description indicates the general nature of the tasks and responsibilities required of positions given this classification. It is not intended as a complete list of specific duties and responsibilities. Nor is it intended to limit or modify the right of management to assign, direct, and control the specific duties of individuals performing this function. The Company reserves the right to change, modify, amend, add to or delete from any section of this document as it deems, in its judgement, to be proper.

Equal Opportunity Employer

This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

By applying to this job and providing your mobile number, you are agreeing to receive an initial text from Cleaver-Brooks, which you will have the ability to opt out of upon receipt. Message and data rates may apply. Message frequency varies.

Company Overview

Headquartered in Bensalem, PA and founded in 1999, EDA Contractors holds an extensive portfolio of experience related to the exterior envelope of commercial, institutional, and industrial buildings. EDA achieves excellence by integrating design knowledge, continuous training, and accountability into every facet of the company.

EDA provides a wide range of comprehensive services: Air & Vapor Barriers, Green Roof Systems, Masonry, Repair & Maintenance, Roofing & Sheetmetal, Siding & Wall Panels, Glass & Glazing, Slate & Cooper Roofing, and Waterproofing.

EDA is a growth and customer-oriented organization. We are proud to foster a workplace culture that has been recognized with several Top Workplace awards.

Job Summary

We are seeking a motivated individual looking to join an exciting and diverse team. This is a tremendous opportunity for an individual who wants to join a specialty contractor that performs work on many of the largest construction projects in the Northeast. The candidate must have experience in exterior envelope construction. Responsible for project scheduling, material and subcontractor procurement, construction coordination, site logistics, project change management, and budget forecasts. Position also requires customer interaction at a very high level.

This position is onsite out of our Elizabeth, NJ location.

Job Responsibilities

• Manage all aspects of project execution including scheduling, procurement of materials and subcontractors, site logistics, construction coordination, change management, and budget forecasting.
• Oversee installation of various roofing systems, including single-ply membranes (EPDM, PVC, TPO), SBS, hot-modified systems, underground waterproofing, and air/vapor barriers (both liquid and sheet-applied).
• Supervise the construction of commercial, healthcare, and educational facilities across the Philadelphia region.
• Coordinate the installation of a variety of panel systems such as aluminum composite panels, insulated panels, single-skin corrugated panels, phenolic panels, and fiber cement panels.
• Manage project controls across all phases—Pre-Construction, Construction, and Close-out. Responsibilities include understanding scopes and contracts, liaising between the contract and management teams, and supervising administrative, operations, maintenance staff, and subcontractors.
• Prepare accurate cost forecasts, manage project submittals and schedules, maintain detailed communication records, respond promptly to emails, review supplier purchase orders, and attend weekly project meetings.

Requirements

• Bachelor’s Degree preferred.
• Five (5) years of construction management experience is desired.
• Strong and demonstrated attention to detail, accuracy and thoroughness.
• Ability to multi-task and take direction.
• Knowledge of Construction Industry
• Proficient in Excel, Word, Adobe

Benefits

• Paid time off
• Health insurance with medical, dental and vision
• 401K eligible after 2 months, company matching after one (1) year of employment
• Performance based merit increase
• Tuition Reimbursement Program
• Company wide events

This information has been designed to indicate the general nature and level of work performed by employees in this role. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications.

EDA Contractors is an equal employment opportunity employer and is committed to a diverse workforce. EDA Contractors does not discriminate on the basis of race, color, religion, national origin, gender, gender identity or expression, sexual orientation, age, marital status, veteran status, disability status, or any other categories protected by applicable federal or state law. Here at EDA Contractors we strive to promote and sustain a culture of diversity, inclusion, and belonging every day.

For more information about EDA, please visit our website at only, recruiters please don’t contact any EDA employee about this job post. No phone calls or emails will be accepted.

• Bachelor’s degree in mechanical engineering
• Thorough knowledge of engineering design & development concepts of automotive BIW system .
• Experience in side body panel, Roof, Floor panel and other BIW components
• Very good proficiency in CATIA V5/V6
• Bachelor’s degree in Mechanical, Engineering.
• 3+ years of proven experience designing high-volume designs of BIW parts
• Development of outer skin panels (A-Surface) in collaboration with OEM Design Studio, Design Engineering, CAE, etc.
• Development of inner panels, reinforcements, brackets and other structural panel
• Ability to create and completion of Sheet metal parts e.g. brackets, Panels, etc
• Design of automotive component parts in CATIA V5. Experience in creating 3D designs and 2D drawings (e.g. CATIA V5 only)
• Strong communication skills, both verbal and written, and capability to drive 10 people offshore team
• Actively engage with Automotive OEM design engineers to collaborate on design projects for trading off cost, mass, joining methods, formability, and performance.
• Interpret CAE simulation results and integrate recommendations into product design
• Strong working knowledge of Design for Manufacturing, including formability with GD&T and dimensional engineering.

Responsibilities

• Bachelor of Science in Mechanical Engineering with a minimum of 3 years of experience in automotive seating system and subsystem design and development
• Thorough knowledge of engineering design & development concepts of automotive Seating system
• Very good proficiency in CATIA V5/V6. Prepare and execute design release in the 3DExperience PLM system. Experience in creating 3D designs and 2D drawings (e.g. CATIA V5 only)
• Experience in design of Seat and seat components e.g. Cushion Frame, Back frame, Headrest, seat plastic and recliners and track
• Relevant experience in Master Sections, Vehicle Integration, Vehicle packaging, Concept creation, assembly processes of various Seat parts.
• Knowledge and understanding of Tooling and manufacturing processes
• Prepare and maintain engineering release and change documentation Lead design FMEA studies and GD&T
• Ability to perform Complete Seat packaging study of seating components
• Working knowledge of regulatory and certification requirements for seating system
• Maintain and develop Design Validation Plans (DVP), and Design Failure Mode Analysis (DFMEA)
• Good knowledge of seating system and component manufacturing processes
• Ability to define seating comfort and define comfort target
• Actively engage with Automotive OEM / Tier-I design engineers to collaborate on design projects for trading off cost, mass, joining methods, molding and testing performance.
• Propose and promote design improvement approaches including cost reduction and design optimization
• Complete and release Seating system, sub-system and detail designs
• Interpret CAE simulation results and integrate recommendations into product design

• Collaborate with seating suppliers and support overall vehicle development milestones and prototype/production build events

• Must have ability to perform feasibility studies, Check A-class surface and define craftsman ship target.

• Meet project deliverables commitments and timelines

• Design of automotive component parts in CATIA V5/V6

• Strong communication skills, both verbal and written, and capability to drive offshore team.