Flexispot Desk Riser White Jobs in Usa

• 
  
• Read and interpret blueprints, sketches, drawings, routing instructions, manuals, specifications or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations and setup requirements.
  
• Properly select, align and secure work holding. Must be able to improvise setups using common tooling such as risers, angle plates etc.
  
• Monitor and/or develop speed, feed, depth or angle of cut during machining operations.
  
• Must observe machine operation to predict or detect malfunctions or out of tolerance machining conditions and adjust machine controls /control media as required.
  
• Verify that all machined details meet print and router specifications, using precision measuring instruments and recording data results. Responsible to ensure first piece inspection is completed for multiple piece runs.
  
• Monitor and maintain proper cleanliness of machine and work area on a daily basis.
  

• 
  
• A minimum of two years of trade school, vocational education or apprenticeship
  
• A minimum of three to five years of CNC machining experience
  
• General machining knowledge, shop math, precision measuring instruments, blueprint reading and GD&T
  
• Part and tool probing
  
• Experience with high speed machining preferred (16 - 27k RPM)
  
• Some openings may require specialized experience with particular machining processes or equipment
  
• Experience with Siemens 840D Control software a plus
  

• 
  
• Present a positive attitude
  
• Be able to work well with meeting deadlines
  
• Have a good work ethic and attendance
  
• Have the ability to communicate well with peers, engineers and leadership
  

The Electrician II (Maintenance) performs maintenance, repair and installation as may be required on the interior building and exterior electrical distribution and lighting systems on the campus.

Essential Duties And Responsibilities:

• Repairs defective outlets and switches; replaces burned out or defective exterior lighting; Checks and replaces defective circuit protection devices including fuses up to 4160 volt.
• Troubleshoots and repairs problems with interior and exterior distribution and lighting; also electrical problems with various equipment such as air handlers, freezers, pumps, etc. Purchases working stock of electrical supplies and assure adequate levels are maintained; Estimates material requirements for jobs requiring other than on-hand supplies and purchase same.
• Prepares and executes a scheduled preventive maintenance program for all electrical distribution, and lighting systems;
• Assists and advises contractors in the installation of new service outlets, lines and switches as necessary to support new equipment or other requirements.
• Assures balanced loading of panels and prevents rated capacity from being exceeded.
• Employs energy conservation at every available opportunity.
• Checks operation, repair and replacement of sump pumps in manholes on a regular basis;
• Monitors signal, telephone, and high voltage cable installations in manhole systems. Cleans Manholes.
• Facilitates inspections and repair of campus lighting system; Re-lamps interior areas as required;
• Performs repair and preventative maintenance checks and services on variety of items including but not limited to stadium light towers, power risers, switchgear, motor control centers, all roof exhaust fans, fire alarm systems under supervision of a licensed fire alarm technician, all motors over 5 hp., variable frequency drives, and transformers.
• Installs new circuits and perform electrical system modifications in accordance with NEC and local electrical codes; Installs all types of conduit systems for electrical, telephone, data and HVAC controls.
• Provides for repair of primary electrical distribution system with members sharing a university cell phone on a rotating basis and providing 24-hour coverage during electrical emergencies.
• Performs scheduled maintenance checks and services on back-up generators and automatic transfer switches.
• Provides excellent customer service.
• Perform lead role on jobs when helper is assigned.
• Performs other duties as assigned.

Qualifications:

• High School Diploma or GED required
• Completion of two-year technical training school in electrical trades required; three or more verifiable years as a journeyman electrician preferred.
• Must possess State of Texas Journeyman Electrician License
• Must possess knowledge of electricity sufficient for troubleshooting electrical and electronic control systems such as automation and energy management systems.
• Must possess proficiency with motor starters, relays, switches, and motor control circuits including 480 volt.
• Must maintain a valid driver's license, motor vehicle liability insurance and personal injury insurance, and complete the University Van Driver Training within 90 days of employment date.
• Must clear and maintain a favorable background investigation and clearance
• Must be able to work evenings and/or weekends as needed
• Must carry company provided cell phone and respond to calls on a 24 hour basis when on-call.
• Must be proficient in speaking, reading, and writing English; must have ability to read written instructions, warning labels, and SDS Sheets in English.
• Must possess legible handwriting, possess eyesight in both eyes corrected to 20/20 and normal hearing ability (may be corrected); must successfully pass a PIPIC test for color blindness.
• Must be able to successfully handle frustrating conditions such as limits on time and limited access to equipment.
• Must possess mathematical ability to add, subtract, multiply, and divide in order to compute material costs as required for completion of work order form.
• Ability to work in an environment that requires a high level of security.
• Ability to operate and work from heights on a man-lift, ladder, cat-walk, roof, or scaffolding.
• Demonstrated knowledge in National Electrical Code and local codes. Ability to read and understand blueprints and technical drawings.
• Ability to use computers and IPad, ability to use Microsoft Office Suite, with an emphasis on Outlook, Word, Excel, and Power Point and Teams, ability to use virtual meeting platforms (zoom) a plus
• Ability to understand and observe general industry safety standards.
• Familiarity with the use of general office equipment, phones, copiers, fax machines, etc.
• Maintain satisfactory and harmonious relationships with the public, and fellow employees each day to assure/sustain quality service and appropriate interactions with others

Physical Demands:

• Able to carry 80 pounds up and down stairs
• Frequent standing, kneeling/squatting, bending/stooping, pushing/pulling, and twisting
• Frequent walking, climbing stairs/ladder/scaffolding, grasping/squeezing, wrist flexion/extension, and overhead reaching; frequent driving
• Work outside and inside, on slippery or uneven walking surfaces; frequent exposure to extreme hot and cold temperatures, inclement weather, insects, dust, toxic chemicals and fumes, noise, vibration, and electrical hazards; work around gas lines; work around machinery with moving parts; may work in tight or enclosed spaces; may work alone; may work irregular hours

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. St. Mary's University is a Hispanic-Serving Institution and an Equal Opportunity Employer.

• 
  
• Performs in and out of position welding.
  
• Performs hand fabricating.
  
• Participate in weld lab classroom training for IR/Trane and ASME/PED certifications as needed.
  
• Work involves considerable stopping, bending, and working on overhead assembles and on main lifts/platforms/risers/ladders.
  
• Will be required to lift up to 35 pounds.
  
• Receives work instructions from a member of management or a team lead.
  
• Must be able to follow standard work, complete production and maintenance records and other documentation related to operations.
  
• Must participate in basic problem solving, 5-S, and lean activities.
  
• Must demonstrate the ability to perform the above duties with no additional training required.
  
• Meet and maintain all safety requirements.
  
• Perform other duties as assigned.
  

• 
  
• Completion of formal welding program or equivalent on the job experience.
  
• Demonstrates reliability
  
• Weld Process: 2F, 2G, 3F, 3G, 4F, 4G
  
• Must be at least eighteen (18) years of age.
  
• Ability to read, write, and follow assembly directions, work order packets, and safety instructions in English.
  
• Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future
  
• Successful completion of a background check and drug screen is required.
  

• 
  
• Starting wage: $28.42/hr
  
• Second & Weekend Shift Premium
  
• Vacation - upon completion of probationary period.
  
• PTO/Sick Leave - After 6 months.
  
• 401K Match
  
• Medical - upon completion of probationary period.
  

WHY THIS POSITION:

• No sales center or warehouse to manage
• Less than 3% turnover
• Monday - Friday Schedule
• Work from Home
• Company Car
• Family Company, Privately Owned

McKee Foods is a privately held, family-run company. McKee bakes and sells America’s leading snack cake brand, Little Debbie, with annual sales $1 Billion+. The ideal candidate will possess direct-store delivery (DSD) sales growth in food, beverage, grocery, or retail environment as a District Sales Manager, Route Sales Representative, Territory Sales Manager, Market Sales Lead, Team Lead, Merchandising Supervisor, Grocery Manager.

Highlights

• Growth : Company is experiencing record sales and continual growth nationwide.
• Stability : Privately held company, nearly 30% of the workforce has been with the organization for 20 years or more. The company has less than 3% turnover nationwide.
• Values: Faith-based / family owned company.
• Award winning! Best Overall Place to Work, Best Food/Beverage Mfg Employer, Best Industrial Mfg Employer

What You’ll Do As a District Sales Representative

• The District Sales Representative is responsible for customer development, customer relations and communication with independent wholesale distributors and retailers. Provide sales assistance to distributors and assist them with growing sales of snack cake products.

Responsibilities Of a District Sales Representative

• Build strong business relationships with each independent distributor in the district through sales assistance.
• Recruit and appoint quality candidates for distributorships.
• Offer quality orientation to new independent distributors.
• Act as liaison between McKee Foods and independent distributors.
• Develop good relationships with retailers in the district.
• Gain authorizations for products/product lines, space and promotions with retailers.
• Communicate with independent distributors on a regular basis.
• Encourage and assist independent distributors with developing business plans.
• Operate a company sales territory when needed and bring the DSR balance to zero within four weeks of ending the territory.
• Assist Distributor Accounts and Retail Accounts Receivable.
• Comply with FSO practices and procedures.
• Operate a company vehicle on a daily basis.
• Communicate job information to accomplish work tasks.
• Exercise personal safety on the job and demonstrate a commitment to the safety of others and our products.

What You’ll Need As a District Sales Representative

• 2+ years of account management and or sales leadership experience in the food & beverage or grocery industry.
• Territory includes St. Petersburg, Riverview, Bradenton, Sarasota, Palmetto, Siesta Key, Osprey, Laurel, Nokomis, Wauchula, Avon Park. Job holder required to live within the district or willing and able to relocate upon job acceptance.
• Ability to develop accounts and build rapport with new and existing clients and distributors.
• Solid MS Office Skills.
• Ability to work from home.
• Early riser – days typically start at 4:00 AM
• Clear driver’s record.
• Advanced degree, training, or military experience is highly preferred.

Heartland Wood Products has been producing unique products for over 30 years. Our customers include cabinet shops, flooring retailers/distributors, homebuilders, lumber yards, and more. We are seeking an experienced professional woodworker to lead our team, and provide high quality custom wood products to our customers, while striving to achieve the highest degree of efficiency and the least amount of waste.

Job description

Position: Production Supervisor

Responsibilities:

• Build treads, risers, butcher block items, table tops, panels, moldings and other custom wood items from lumber
• Operate rip saws, chop saws, glue presses, CNC, shaper, planer/sander and other power equipment
• Effectively lead a team of highly skilled wood workers to achieve established KPI’s, while fostering a positive teamwork-based work environment
• Participate in various continuous improvement related projects
• Maintain on-time delivery of customer orders
• Effectively manage inventory based on lean manufacturing principles
• Ensure all work is completed accurately, on time, and to high quality standards

Skills:

• Proficient in woodworking techniques, including measuring, cutting, and shaping wood
• Strong leadership and communication skills
• Production planning and scheduling experience
• Familiarity with throughput and bottleneck analyzation
• Capacity planning/scheduling and labor allocation experience
• Inventory management experience (lumber, WIP, finished goods)
• Lean manufacturing principles (5S, flow, waste reduction)
• Knowledge of different types of wood and their characteristics
• Ability to read and interpret blueprints and technical drawings
• Familiarity with using hand tools and power tools for woodworking
• Attention to detail and ability to work with precision
• Strong problem-solving skills to troubleshoot issues during the woodworking process
• Experience operating a molder is preferred but not required

Hours:

• Mon-Thur. 6:30 a.m.-3:30 p.m. and Fri 6:30 a.m.-12:30 p.m.
• Paid major holidays

Benefits:

• 401(k) matching
• Dental insurance
• Health insurance
• Paid time off
• Vision insurance
• Profit sharing

Job Title: Commissioning Engineer

Location: Sterling, VA

About Us

At Vertical Mechanical Group (VMG), we are dedicated to delivering top-tier projects in the Mechanical and Plumbing sector. We pride ourselves on innovation, quality, and teamwork. As we continue to grow, we are seeking a talented and motivated Commissioning Engineer to join our dynamic team.

We are looking for a detail-oriented and driven Commissioning Engineer to join our commissioning team. This position reports directly to the Commissioning Manager and plays a critical role in ensuring the quality and performance of our mechanical and plumbing systems. The ideal candidate will have a strong background in mechanical and plumbing systems, excellent problem-solving skills, and the ability to manage multiple tasks effectively.

Objective

The primary objective of this position is to oversee the installation, commissioning, and maintenance of Building Automation Systems (BAS) and HVAC controls across our commercial projects. This leadership role is essential to ensuring projects are completed on time, within budget, and to the highest standards of quality and performance.

Key Responsibilities

Field Management Responsibilities

• Lead and manage the installation and commissioning of BAS and HVAC control systems for commercial projects.
• Supervise and provide guidance to technicians, subcontractors, and other team members to ensure seamless project execution.
• Coordinate with project managers, engineers, and contractors to align with project goals and deliverables.
• Troubleshoot and resolve technical issues related to BAS and control systems.
• Perform calibration, configuration, service, and maintenance of controls and subsystems.
• Conduct routine system updates, troubleshooting, and utilize diagnostic tools to resolve issues in a timely manner.
• Ensure compliance with all safety protocols, project specifications, and industry standards.
• Inspect, test, and verify control systems to ensure optimal performance and adherence to design specifications.

Engineering Responsibilities

• Develop detailed control system submittals outlining control strategies, network architecture, and integration requirements. Prepare system schematics, wiring diagrams, and riser diagrams to support project implementation.
• Review project design documents, specifications, and sequence of operations to validate alignment with project scope and operational objectives.
• Identify discrepancies or inefficiencies in control sequences and propose optimizations to improve system performance.
• Coordinate with procurement and project teams to ensure timely and cost-effective acquisition of materials.

Qualifications

• Proven experience in Building Automation Systems (BAS) and HVAC controls.
• Familiarity with Schneider, JCI, Siemens, Pritchett, or NAVSys control systems or platforms.
• Strong leadership and team management skills.
• Proficiency with major control platforms such as Trane, Siemens, Johnson Controls, or Honeywell.
• Exceptional troubleshooting and problem-solving abilities.
• Excellent communication skills for both technical and client-facing interactions.
• Knowledge of industry standards, codes, and regulations.
• Ability to manage multiple projects and priorities effectively.
• Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related field.
• Certifications in BAS or HVAC controls preferred.

HIRING: LEAD STRUCTURED CABLING TECHNICIANS – ABILENE, TX

We are actively seeking skilled and experienced Structured Cabling Technicians to join our team for onsite work in Abilene, TX. This is a great opportunity for motivated professionals looking for steady project work with excellent field support.

Position: Structured Cabling Technician

Location: Abilene, TX (On-Site — Local & Travel Technicians Welcome)

Compensation: Competitive pay based on experience + Per Diem | Company-Provided Lodging

───────────────────────────

RESPONSIBILITIES

───────────────────────────

• Install, terminate, and test structured cabling systems (Cat6A, fiber optic, and multi-conductor)

• Install and dress cable in server rooms, IDFs, and MDFs

• Terminate and label patch panels, jacks, and keystone outlets

• Run cable pathways (J-hooks, ladder rack, etc.)

• Perform cable testing and certification using Fluke or similar test equipment

• Read and interpret blueprints, floor plans, and riser diagrams

• Install and route fiber optic cable (single-mode and multi-mode)

• Fiber optic splicing (fusion) — a PLUS

• Maintain a clean, safe, and organized job site

• Coordinate with project managers, GCs, and other trades on-site

───────────────────────────

REQUIREMENTS

───────────────────────────

• Minimum 2+ years of hands-on structured cabling experience

• Proficiency with low-voltage cabling standards (TIA/EIA 568)

• Ability to read and follow technical drawings and cable schedules

• Experience with cable testing and certification documentation

• Must have own hand tools and be comfortable working at heights (ladders, lifts)

• OSHA 10 certification preferred (or willingness to obtain)

• Reliable transportation to job site

• Strong attention to detail and ability to work independently or as part of a team

• Must be able to pass a background check and drug test

───────────────────────────

HOW TO APPLY

───────────────────────────

Interested candidates, please send your resume and a brief summary of your relevant experience to or apply using the provided link StructuredCabling #LowVoltage #TelecomJobs #FiberOptics #NowHiring

Position Overview

Serve as a technical advisor to sales teams and clients by translating requirements into complete, accurate, and executable structured cabling solutions. This role bridges pre‑sales, estimating, and operations by delivering compliant designs, pricing, documentation, and effective project handoff for SCS RFPs.

Key Responsibilities

• Act as a technical advisor to account executives and clients throughout the pre‑sales and proposal lifecycle

• Conduct on‑site surveys to assess infrastructure, pathways, and constructability

• Perform detailed client needs analyses to define scope, assumptions, and solution requirements

• Generate accurate Bills of Materials (BOMs) and labor estimates within P&L constraints

• Develop comprehensive Statements of Work (SOWs) for Structured Cabling Systems (SCS) RFPs

• Define and document project assumptions, terms & conditions, and exclusions for proposals

• Review RFP documentation and prepare RFIs as required

• Design functional, code‑compliant solutions aligned with core product offerings and technical capabilities

• Provide technical support during scope reviews, pre‑bid meetings, and client presentations

• Participate in pre‑bid meetings and proposal strategy discussions

• Lead or participate in project kickoff meetings to transfer scope, risks, and execution details to operations

• Ensure design and estimate accuracy to support successful project execution and margin targets

Core Technical Skills

Ability to read and interpret:

• Cabling pull schedules

• Floor plans, ceiling plans, and riser diagrams

• Line diagrams and system schematics

Strong understanding of:

• Structured cabling installation methodologies

• Proper rack fabrication

• Copper and Fiber Cable Termination Standards

Additional competencies:

• Proven experience estimating large‑scale commercial cabling projects

• Proficiency in mathematics, statistics, and data analysis for cost modeling

• Expertise with analytical tools such as spreadsheets and database managers

• Strong ability to interpret technical specifications, drawings, and contract documents

Professional Skills

• Exceptional analytical skills with strong attention to detail

• Clear, concise technical and narrative report writing skills

• Strong written and verbal communication skills for client‑facing and internal collaboration

• Excellent time management with the ability to manage multiple deadlines

• Highly organized, self‑motivated, and effective at multitasking

• Strong troubleshooting and problem‑solving capabilities

Tools & Technology

Microsoft Office Suite:

• Excel (estimating, analysis, labor modeling)

• Word (SOWs, RFP responses, documentation)

• PowerPoint (technical and sales presentations)

Additional tools:

• Salesforce (document management and collaboration)

• Bluebeam (document markup and take‑offs)

Experience & Education

• 5+ years of experience in commercial structured cabling or low‑voltage environments (preferred)

• BICSI Technician Certification

• Demonstrated knowledge of end‑to‑end delivery of cabling installation projects

Physical Requirements

• Ability to stand and/or walk active job sites during surveys and pre‑construction activities

Growth & Development

This role offers hands‑on training and mentorship with experienced estimators and technical staff, with opportunities for advancement into a Senior Estimator (RCDD) role based on performance and experience.

• 
  
• Review and understand RFP/RFQ documents from customers and supports request for information (RFI) process as it pertains to the low voltage and related WSFO items of the projects.
  
• Identify project risks and/or challenges as part of solutioning process.
  
• Assist in generation of rough order of magnitude and/or formal estimates for potential projects pertaining to LV efforts or LV portions of larger efforts.
  
• Assist in proposal development of the deliverable.
  
• Maintain a well organize database of bid documents for reference upon award of contract to manage the kickoff process with the PreCon Manager.
  
• Identify additional revenue opportunities for CPG, as applicable.
  
• Coordinate with personnel from sales, engineering, preconstruction, execution, and finance teams.
  
• Collect different quotes from subcontractors, vendors, and suppliers pertaining to the task at hand.
  
• Review and assess cost estimates.
  
• Identify labor, material, costs, and time requirements by researching proposals, blueprints, and any related documents.
  
• Comfortable making site visits and documenting the data for distribution to the CPG team.
  
• 50% travel for local candidates within the NOVA area. 5% outside NOVA.
  
• Create shop drawings and other related documentation for potential change orders during project execution.
  
• Assist estimation and procurement teams to ensure correct material orders and project pricing.
  
• Perform site walks to assist the estimation team in properly pricing material and labor for new opportunities.
  

• 
  
• 5-10 years of LV installation/Estimation and on-site project management preferred.
  
• 2+ years of experience in construction estimating, with specific knowledge of mission critical systems
  
• 2+ years of data center experience relating to batteries, UPS replacements and general maintenance required in a mission critical environment is preferred
  
• Electrical estimating is a plus
  
• Ability to interpret contract terms, conditions, and exhibits as applicable to project requirements
  
• Strong interpersonal skills and the ability to work both independently and in a team environment
  
• Excellent organizational and problem-solving skills
  
• Demonstrated experience developing and justifying budgets
  
• Ability to create and maintain processes for project documentation
  
• Ability and willingness to think outside of the box to find creative and innovative solutions prior to and during the construction process to reduce costs with no impact on quality and reliability
  
• Possess excellent communication skills, attention to detail, and be able to maintain high-quality standards
  
• Proficient with Microsoft Office Suite. On Screen Take Off or Bluebeam, Building Connected or Accubid or RS Means preferred.
  
• Must be a US Citizen
  
• 10% travel
  

• 
  
• Windows power user skill set, proficient with Microsoft Office Suite, and estimating software such as Accubid, RS Means, On Screen Take Off, Bluebeam, AutoCAD. Fluke/Viavi and other assorted Fiber testing equipment, Fluke LinkWare, Viavi J-Reporter and/or other Testing platform software's. Fujikura, Sumitomo and/or similar splicing tools and software's.
  
• Procore Software for vendor management.
  

• 
  
• None
  

• 
  
• No supervisory requirements for this role
  

• 
  
• Prolonged periods of sitting at a desk or working on a computer. Must be able to lift up to 15-50 pounds at a time. May be required to walk around facility. Can safely work from a 12' ladder, as well as safely operate and work from a lift to greater heights. Need to be able to visually identify colors for copper and fiber link identification.
  

Benefits to Joining Our Team

CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  

CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Senior Logistics Manager – Inventory, Shipping & Operations | East Coast USA

We're building something exceptional — and we need an exceptional operator to help us scale it.

Our gallery and distribution network is growing fast across some of the most dynamic markets on the East Coast, and we're looking for a Senior Logistics Manager who can lead from the front, build scalable systems, and move high-value artworks across the globe with precision, compliance, and care.

This is not a desk role. This is a player-coach position — where strategy meets hands-on execution, every single day.

 Where You'll Operate NYC SoHo Gallery · NYC 5th Avenue Flagship · Chelsea Warehouse & Distribution Center · Miami South Beach Gallery · East Coast Expansion Markets (and a global shipping network spanning 50+ countries)

 What You'll Own

• Lead & develop a distributed logistics team across multiple high-profile locations
• Personally manage complex international customs clearances at JFK, Miami, London, Hong Kong, Dubai, São Paulo, and beyond
• Oversee end-to-end inventory, warehouse operations, and white-glove client deliveries
• Build the operational playbooks that will power our East Coast expansion
• Coordinate international art fair logistics — Art Basel, Venice Biennale, Frieze, Art Dubai, and more
• Drive 15–20% YOY cost savings through route optimization, consolidation, and smart vendor management
• Navigate CITES, ATA Carnets, UNESCO cultural property regulations, export controls, and sanctions compliance across global markets

 Your Tech Stack Priority ERP · Salesforce · · Google Workspace · WhatsApp

 You Bring  5+ years in logistics management, international freight, or global trade compliance Multi-location, distributed team leadership experience Deep expertise in customs clearance across the U.S., Europe, Asia, Latin America & Middle East Art logistics, luxury goods, or high-value asset experience — strongly preferred Licensed Customs Broker / CITP / APICS credentials — a serious plus Fluent English; Spanish conversational or fluent preferred 30–40% travel comfort — including international

 Why This Role Is Different

You won't just manage logistics. You'll architect the infrastructure behind one of the most ambitious gallery expansion stories on the East Coast — coordinating world-class artworks, building global vendor networks, and leading a team that operates at the intersection of art, culture, and operational excellence.

You'll have autonomy. Real impact. A path to Director-level growth. And a front-row seat to the global art world.

We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, national origin, disability, or veteran status.

#Hiring #LogisticsJobs #SeniorLogisticsManager #ArtLogistics #SupplyChain #InternationalShipping #CustomsCompliance #NewYorkJobs #EastCoast #WeAreHiring #OpenToWork #MondayCom #Salesforce #PriorityERP #GalleryOperations