Excel Basic Level Jobs in Usa

Six Flags Entertainment Corporation is the world’s largest regional theme park company with over 42 parks across North America. For more than 55 years, Six Flags has entertained millions of families with world-class coasters, themed rides, thrilling water parks, and unique attractions. With a culture built on safety, service, fun and friendliness, integrity, innovation, and results orientation, our mission at Six Flags New England is to create fun and thrills for all ages. 

Pay Starting at $18.50/Hour

• Supporting and up-holding the mission, goals and objectives of the Six Flags New England Safety Department
• Providing quality basic life support care to include all Basic Life Support (BLS) skills on patients in the pre-hospital setting as indicated by state law, statewide protocol, regional policy and procedure and the Standard Operating
• Guidelines set forth by the Six Flags New England First Aid Policies and Procedures manual
• Interacting with other EMS, Fire, and Police services as required to promote patient care and transportation
• Complying with Departmental requirements regarding documentation, data input, and information handling
• Perform minor vehicle maintenance (fuel, fluids, air, wash vehicles etc.) on all vehicles as required
• Responding and assisting as needed or directed in the Six Flags New England Emergency Response Guide
• ­­­­­­­­­­­­­­­­­­­­­Enforcing all Six Flags New England policies
• Assisting in other areas of the Safety Department
• Performing other incidental and related duties as required and assigned

• Current Massachusetts EMT Certification
• Current Basic Life Support Healthcare Provider CPR card
• Current MA licensed driver without serious moving violations
• Strong work ethic, attention to detail, and organizational skills
• Ability to interact in a professional and positive manner with large groups of people
• Friendly, outgoing personality, and the ability to address guest concerns
• Willing to work in a high-performance team environment
• Willing to work a flexible schedule, including evenings, weekends, and holidays
• Able to meet the physical demands of the job, with or without reasonable accommodations, including walking long distances, standing for long periods of time, lifting, working at heights, etc.
• Able to communicate effectively in the English language, including the ability to read, speak, and understand the English language
• 18 years old or older

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Defense, Space & Security (BDS) is seeking a Lead Electrical Design and Analysis Engineer (Level 5) to join the T-7A Mission Systems Team located in Berkeley,MO.

As a Lead Engineer on the Mission Systems Hardware team, your role will lead a team in completing the development, qualification, and transition to production of multiple Mission Systems hardware, such as mission computing, communications, navigation, surveillance, datalink and displays. You will be responsible for managing the technical performance of the team and a few key suppliers to ensure integration and verification of installed system performance.

The T-7A Mission Systems includes new equipment and integration of off-the-shelf hardware that is tested in an advanced laboratory and verified in ground/flight test. The Mission Systems development activities include hardware requirements decomposition, qualification test, laboratory and aircraft integration, formal verification test, and production support.

Why Join Us?

• Impactful Work: Be part of a team that plays a crucial role in ensuring the safety and security of our nation. Your work will directly contribute to the development of advanced military capabilities.

• Innovative Environment: Collaborate with a diverse group of talented professionals who are dedicated to pushing the boundaries of technology and engineering excellence.

• Career Growth: We are committed to your professional development. Benefit from mentorship opportunities, tuition reimbursement program, and a culture that encourages continuous learning and innovation.

Position Responsibilities:

• Serves as Technical Lead Engineer for the hardware team

• Provides oversight and approval of technical approaches, products and processes

• Leads investigations of technical issues and follows through with RCCAs

• Provides guidance and leadership on testing and validation work to assure that operational and functional requirements are met

• Manages performance of critical suppliers to ensure system integration and compliance with tiered requirements

• Provide technical guidance and mentorship to junior engineers, fostering a culture of continuous learning and improvement

• Assigns responsibility for activities to team members and ensures technical correctness and consistency of products and services

• Leads research into technology advances for potential application to various derivatives of T-7A

• Develops and maintains relationships and partnerships with customers, stakeholders, and peers

This position may require 10- 20% travel

This position is expected to be 100% on-site. The selected candidate will be required to work onsite at one of the listed location options.

This position requires the ability to obtain a US Secret Security Clearance for which the US Government requires US Citizenship.

• A final Secret Clearance Post-Start is required.

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry

• Level 5: 14+ years of work-related experience with a bachelor’s degree OR 12+ years of work-related experience with a master’s degree

• 14+ years of experience with Avionics Hardware design, production and project management

• 14+ years of experience in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues

Preferred Qualifications (Desired Skills/Experience):

• 14+ years of systems engineering experience involving: system requirements, functional decomposition and allocation, integrated design, analysis and evaluation, verification

• Active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active

• Experience with Advanced Cockpit Displays: Heads Up Display (HUD), Up Front Control Display (UFCD), Large Area Displays (LAD), and mission systems avionics equipment

• Experience with commercial and military avionics systems

• Experience working with suppliers and supply chain management

• Proposal development experience

Signing Bonus Potential for Qualified External Candidates.

Conflict of Interest:

Successful candidates for this job must satisfy Company’s Conflict of Interest (COI) assessment process.

Typical Education/Experience:

Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Relocation:

This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

This position is for 1st shift.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

Boeing offers a comprehensive benefits package including generous Paid Time Off (PTO), flexible work environment, paid parental leave, 401k matching, extremely generous tuition assistance for earning advanced degrees, and paid medical leave programs.

Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting

• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range:

Level 5: $164,900 - $223,100

Applications for this position will be accepted until Mar. 25, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

SUMMARY
Drive continuous improvement in operational metrics while maximizing profitability within the business unit. Drive team to exceed customer expectations. Provide exceptional support to customers, team members and shareholders.

• 
  
• Engage with potential businesses to identify their needs and promote our products/services.
  
• Conduct market research to identify new leads and opportunities.
  
• Build and maintain strong relationships with clients.
  
• Collaborate with the sales team to develop strategies for reaching sales targets.
  
• Maintain accurate records of customer interactions and sales activities.
  
• Participate in training sessions to enhance your sales skills and product knowledge.
  

• 
  
• High school diploma or equivalent; a degree in business or a related field is a plus.
  
• Excellent communication and interpersonal skills.
  
• Strong problem-solving abilities and a customer-focused mindset.
  
• Ability to work independently and as part of a team.
  
• Basic knowledge of sales principles and techniques is an advantage but not required.
  

• 
  
• Unlimited performance-based incentives.
  
• Comprehensive training and mentorship program.
  
• Opportunities for career advancement within the company.
  
• A positive and collaborative work environment.
  
• 10 year retirement vesting program.
  
• 1st year average income is 73k in our michigan office(no prior experience). Commission Based role with weekly bonuses available and a weekly commissions account draw.
  

Six Flags Entertainment Corporation is the world’s largest regional theme park company with over 42 parks across North America. For more than 55 years, Six Flags has entertained millions of families with world-class coasters, themed rides, thrilling water parks, and unique attractions. With a culture built on safety, service, fun and friendliness, integrity, innovation, and results orientation, our mission at Six Flags New England is to create fun and thrills for all ages. 

Pay Starting at $18.50/Hour

• Supporting and up-holding the mission, goals and objectives of the Six Flags New England Safety Department
• Providing quality basic life support care to include all Basic Life Support (BLS) skills on patients in the pre-hospital setting as indicated by state law, statewide protocol, regional policy and procedure and the Standard Operating
• Guidelines set forth by the Six Flags New England First Aid Policies and Procedures manual
• Interacting with other EMS, Fire, and Police services as required to promote patient care and transportation
• Complying with Departmental requirements regarding documentation, data input, and information handling
• Perform minor vehicle maintenance (fuel, fluids, air, wash vehicles etc.) on all vehicles as required
• Responding and assisting as needed or directed in the Six Flags New England Emergency Response Guide
• ­­­­­­­­­­­­­­­­­­­­­Enforcing all Six Flags New England policies
• Assisting in other areas of the Safety Department
• Performing other incidental and related duties as required and assigned

• Current Massachusetts EMT Certification
• Current Basic Life Support Healthcare Provider CPR card
• Current MA licensed driver without serious moving violations
• Strong work ethic, attention to detail, and organizational skills
• Ability to interact in a professional and positive manner with large groups of people
• Friendly, outgoing personality, and the ability to address guest concerns
• Willing to work in a high-performance team environment
• Willing to work a flexible schedule, including evenings, weekends, and holidays
• Able to meet the physical demands of the job, with or without reasonable accommodations, including walking long distances, standing for long periods of time, lifting, working at heights, etc.
• Able to communicate effectively in the English language, including the ability to read, speak, and understand the English language
• 18 years old or older

$20.50/ HR

Join the Public Safety team as an EMT and get the opportunity to deliver excellent quality care in a dynamic environment. Join the Six Flags team and enjoy FREE park admission, exclusive ride nights, and special employee events! You must be at least 18 or older and have a Missouri EMT-B license to apply. We offer flexible scheduling!

• Provide safe, professional, and excellent quality care under the guidance of SSM medical protocols and Six Flags policies, safety standards, and standard operating procedures.
• Recognize the need for additional assistance, such as ALS or ambulance transport.
• Document all patient care via completion of patient care reports.
• Inspection, inventory, and maintenance of medical equipment and First Aid Stations.
• Respond to emergency situations as needed.
• Vehicle operations, including driving and operating park vehicles in a safe manner.
• Conduct safety inspections throughout the park as requested.
• Perform any other duties as assigned by Six Flags Leadership.

• Must be at least 18 years of age
• Valid driver’s license required
• Current Missouri EMT-B license
• Current BLS for Healthcare Providers
• Current PHTLS or ITLS preferred
• Must be able to pass a written exam with a 75% or higher
• Demonstrate excellent written and oral communication skills
• Flexible scheduling including days, nights, weekends, and holidays
• Ability to work in all conditions of weather, as well as high structures and confined spaces
• Ability to stand or walk for long periods of time
• Must be professional, self-motivated, the ability to multi-task and have an enthusiastic attitude
• Must have strong teamwork skills and the ability to work with others

$20.50/ HR

Join the Public Safety team as an EMT and get the opportunity to deliver excellent quality care in a dynamic environment. Join the Six Flags team and enjoy FREE park admission, exclusive ride nights, and special employee events! You must be at least 18 or older and have a Missouri EMT-B license to apply. We offer flexible scheduling!

• Provide safe, professional, and excellent quality care under the guidance of SSM medical protocols and Six Flags policies, safety standards, and standard operating procedures.
• Recognize the need for additional assistance, such as ALS or ambulance transport.
• Document all patient care via completion of patient care reports.
• Inspection, inventory, and maintenance of medical equipment and First Aid Stations.
• Respond to emergency situations as needed.
• Vehicle operations, including driving and operating park vehicles in a safe manner.
• Conduct safety inspections throughout the park as requested.
• Perform any other duties as assigned by Six Flags Leadership.

• Must be at least 18 years of age
• Valid driver’s license required
• Current Missouri EMT-B license
• Current BLS for Healthcare Providers
• Current PHTLS or ITLS preferred
• Must be able to pass a written exam with a 75% or higher
• Demonstrate excellent written and oral communication skills
• Flexible scheduling including days, nights, weekends, and holidays
• Ability to work in all conditions of weather, as well as high structures and confined spaces
• Ability to stand or walk for long periods of time
• Must be professional, self-motivated, the ability to multi-task and have an enthusiastic attitude
• Must have strong teamwork skills and the ability to work with others

Job Title: Technical Designer (Associate level)

Location: In-Office – Los Angeles, CA 

Schedule: Full-Time; Monday-Friday 8:30am-5:00pm 

Department: Production 

Reports To: Director of Production 

Compensation: $31.00 to $36.00 an hour 

Position Summary 

The Judy Blue Technical Designer will demonstrate expertise and knowledge in both junior and plus-size denim – development, fit, construction, sizing, grading, and production practices and procedures. The ideal candidate will have proven success in an apparel/garment construction and manufacturing environment with a specific focus on denim. The Technical Designer is responsible for a cross-functional position that interacts with both the creative and executive parts of the business. This role collaborates with the Technical Design, Design, Product Development, and Production teams, and reports to the Director of Production. 

Key Responsibilities 

• Support the Technical Design team in all aspects; working closely with other team members to effectively manage the overall workload related to construction, fit, approvals, comments, timelines, and other relevant tasks, all under the guidance of Senior Technical Designer. 
• Prepare for, organize, and lead fittings, and record accurate fit comments during fittings. 
• Analyze all samples for size, fit, quality, and construction and review findings with Senior TD as needed. 
• Revise patterns, grade rules, and construction as needed, under the guidance of Senior TD. 
• Communicate daily with overseas vendors re: fit, specs, grading issues and construction via fit comments and email correspondence. 
• Maintain sample library, measurement charts, technical documentation, and tracking. 
• Assist in reviewing prototypes, SMS, and production samples for fit, quality, and accuracy. 
• Partner with cross-functional teams (design, product development, and production) to ensure deadlines are met. 
• Conduct basic research on fabrics, trims, and finishes as needed. 
• Ensure consistency of brand fit and construction standards across styles. 
• Strive to enhance fit and quality by analyzing customer feedback, sales input, and staying informed about market competition. 
• Team administrative support tasks as needed. 

Qualifications 

• Bachelor’s Degree in Apparel Manufacturing, Product Development, Technical Design, Patternmaking, or equivalent work experience. 
• 5-10 years’ work experience Technical Design or a related field, including experience with fit, spec, patterns, fabrics, and commenting preferred. 
• Experience with junior and plus size denim. 
• Possess a comprehensive understanding of fit in patterns, construction techniques, sample evaluation, material assessment, workmanship, functionality, and production feasibility. 
• Extensive computer experience including, but not limited to, Adobe Illustrator, Microsoft Office: Excel, Word, Outlook, PowerPoint. 
• Comfortable with multitasking and handling changing priorities in a fast-paced environment. 
• Strong planning, organizational, and problem-solving skills with a sense of priority for deadlines and attention to detail. 
• Strong verbal and written communication skills. 
• Positive and collaborative spirit. 
• Ability to physically work with garments and samples. 

Benefits

• Medical, Dental, and Vision insurance (HMO and PPO options)
• Accrued paid time off
• 7 Paid Holidays
• 401(k) option
• 3% Company Safe Harbor contribution*
• Pension*
• Sick leave

*Employee eligible after 12-month, full vesting after 6 years.

Eligibility

Candidates must be legally authorized to work in the United States without the need for current or future visa sponsorship. We are unable to sponsor employment visas at any stage.

Physical Requirements

This role is office-based and involves standard activities such as sitting, typing, attending meetings, and occasional lifting of items up to 10 pounds. We’re committed to providing reasonable accommodations to support individuals with disabilities in performing essential job functions.

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.Boeing Commercial Airplanes is seeking an Associate, Mid-Level, or Senior Equipment and Tool Designer to join our 2nd shift Production Engineering team in Everett , WA .A successful candidate in this role will have passion, creativity, and an insatiable desire for process improvement and efficiency.

They will also have a strong desire to be out on the production floor, interacting with mechanics, safety, and tool makers, and directly supporting the production system.

In Production Engineering, we need highly responsible professionals committed to upholding the highest standards of safety, quality, and integrity.This is a unique 2nd shift opportunity in that you will be following a 4x9 schedule , working 4 days with 9 hours each (1:30 pm – 11 pm PST) , either Monday through Thursday OR Tuesday through Friday.

Employees are paid for a full 40-hour workweek and have 3 days off every week.Primary Responsibilities: Investigates and develops basic to moderately complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements.

Participates in design reviews, collects design requirements, creates and revises drawings and models to support the build plan.

Creates specifications, purchase requests and usage instructions for equipment and tooling.

Self-checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.

Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and supports user training development.

Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions.

Maintains hardware and software configuration.

Supports the disposition of equipment and tooling.Basic Qualifications (Required Skills/ Experience): Experience working in a manufacturing/production environment Ability to work 2nd shift, as required by this position(Associate level) 1 or more years' related work experience or an equivalent combination of education and experiencePreferred Qualifications (Desired Skills/Experience):(Experienced level) 3 or more years' related work experience or an equivalent combination of education and experience(Senior level) 6 or more years' related work experience or an equivalent combination of education and experienceConflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation:This is a union-represented position.In locations where SPEEA representation applies, this job family will be covered by the terms of the collective bargaining agreement.

Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.Pay and Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range for Associate (level 2): $61,200
- $82,800Summary pay range for Mid-Level (Level 3): $73,950
- $100,050

Summary pay range for Senior (Level 4): $87,550
- $118,450Applications for this position will be accepted until Mar.

19, 2026Export Control Requirements:This position must meet U.

S.

export control compliance requirements.

To meet U.

S.

export control compliance requirements, a "U.

S.

Person" as defined by 22 C.

F.

R.

§120.62 is required.

"U.

S.

Person" includes U.

S.

Citizen, U.

S.

National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredRelocationThis position offers relocation based on candidate eligibility.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 2nd shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

As a Assistant Manager for Little Caesars, you will be responsible for the overall shift operations, guest experience, sales performance, and execution of brand excellence in a store. In the absence of the manager, the Assistant Manager works productively and supervises restaurant Colleagues to ensure they perform their jobs responsibilities so the restaurant achieves customer satisfaction and profitability during their shift.

• Serves customers correct, complete orders within service time goals, according to the Customer Service Standards, the Priority Guidelines, the Telephone and Front Counter station procedures and if necessary, the Remedy Process.
• Lead team members on shifts, including assigning tasks (cleaning, line duties, opening/closing duties), providing feedback and training
• Utilize the huddle board to effectively position the team
• Know and support appropriate personnel policies, labor laws and safety procedures
• Ensure all security procedures are executed (safe procedures, open/close procedures etc.)
• Transition into opening/closing duties
• Make guests really happy by providing great guest service
• Resolve guest complaints/issues
• Lead team members to open, transition, and close shifts
• Manage and organize the line and delegate duties to team members
• Know and uphold standards for product quality
• Work the line as needed
• Promote sales on the shift through suggestive selling and knowledge on in-store promotions
• Execute and support all food safety requirements and practice
• Control food costs, labor, waste, and cash on the shift
• Count drawers and follow proper daily cash handling procedures
• Complete additional e-learning as required

The Assistant Manager receives direction and training from the Restaurant Manager. The Assistant Manager is responsible for supervising other Colleagues and provides adult supervision to Colleagues less than 18 years of age. During each shift, they motivate, direct and coach Colleagues to work proficiently at their assigned stations and then follow-up to ensure tasks are completed in a timely manner according to Little Caesars procedures.

• Minimum 18 years of age
• Have previous experience in restaurants, retail or a position involving customer contact, previous leadership experience preferred.
• Possess a high school diploma, or equivalent, and possess basic math skills.
• Legally authorized to work in the United States.
• Great communication skills to communicate effectively with guests and co-workers
• Must have a positive attitude and ethics which support our values and culture
• Must be a strong team player
• Ability to train and coach others
• Ability to work a standard schedule of 20-30 hours per week
• The ability to lift up to 55 pounds.
• The ability to push and pull up to 55 pounds.
• The ability to squat or crouch to lift items from floor level.
• Ability for twisting of the back up to 90 degrees left and right.
• Ability for bending of the back up to a minimum of 90 degrees to lift objects from the floor
• Ability to stand for long periods of time.
• Must be able to work Friday, Saturday and Sunday.

As the fastest growing pizza chain in the U.S., theres no denying that Little Caesars is doing something right. Were an international brand thats a household name and a front-of-mind decision when youve got pizza on the brain.

Weve grown tremendously since opening the first store in 1959 and were still growing. But, at the end of the day, our success as a big-town name is because of our focus on small town values.

May 26, 2026 Start!

At Optomi, passion, drive, innovation, and strong core values are at the heart of our organization. Are you looking for a challenging but rewarding career with a company who puts their employees first? How about a promote within culture and working for a Top Company Culture award winner, according to Entrepreneur? Optomi, part of the Optomi Professional Services family of brands, has launched a new program called the Acadomi, which allows recent college graduates to jump-start their careers in the IT staffing industry.

Through the Acadomi, starting May 26th, 2026, we are growing our organization and providing hands-on training, mentorships and growth opportunities within our company. Recent Graduate candidates will work full-time with seasoned recruiters and account executives to gain a foundation for the IT industry – from best recruiting practices to account management. After completing the program, you will hit the market in either our Atlanta, Charlotte, DC, Detroit or Dallas office. Think you might be a fit? Apply today and let’s find out together!

Responsibilities:

• Participate in an informative 2-month training program (MAY 26TH, 2026 START DATE) with experienced Recruiters and Account Executives to boost your career in IT recruiting
• Work closely with a Team Lead to perfect your skills in sourcing, interviewing, and submitting candidates
• Gain experience cold calling, interacting and prospecting new business
• Gain a foundation for Optomi’s recruiting and sales process to eventually move into an Account Executive role

What does an Account Executive do for Optomi?

• Connect with clients/companies in the market to learn about their business needs and problems through phone calls, in-person meetings, coffees, lunches, etc.
• Develop strong partnerships with key clients/companies by informing them who Optomi is and what how we can be the ideal partner for their business needs
• Be the point-of-contact for all hiring needs between the client and recruiting team (interview feedback, updates, coordination, etc.)
• Maintain and constantly develop your own book of business through excellent written and verbal communication with clients

Basic Requirements:

• Bachelor’s degree

Desired Skills and Experience:

• 0-1 years of professional experience – Training provided!
• Drive and determination to succeed
• Ability to thrive in a fast-paced and innovative environment
• Excellent written and verbal communication skills
• The ability to develop strong and genuine relationships with our customers and consultants

Perks/Benefits:

• A competitive base salary
• MacBook Pro or MacBook Air computers!
• The ability to be part of a fundamental change in the staffing industry
• Core values to include community involvement for both charitable and professional involvement
• Monthly phone allowance
• “Promote-from-within” philosophy
• Annual performance trip to a tropical destination for you and a plus one with all expenses paid!
• Give back opportunities including community involvement for both charitable and professional involvement
• Industry-leading, innovative technology used for candidate submissions
• Earned performance incentives

ENTRY LEVEL ACCOUNT MANAGER: YOUR PEST-BUSTING PEOPLE SKILLS WANTED!

Got the knack for building relationships and a secret desire to banish creepy crawlies from the world? As an Entry Level Account Manager, you'll be mentored by the best in the business, learning how to nurture client relationships and ensure their pest control needs are met with precision and panache. This isn't just a job; it's a launchpad for a rewarding career where your people skills are as valuable as your strategic thinking.

If you're looking for a workplace where you can make a real impact, where every successful pitch means one less ant invasion, and where your efforts directly contribute to peace of mind for our clients, you've found your hive. At Highland Management Group, we value creativity, tenacity, and a good sense of humor (because let's be honest, you need one when dealing with bed bugs).

Entry Level Account Manager Responsibilities:

• Learn to cultivate and maintain strong relationships with existing and potential residential clients, understanding their unique pest control challenges and offering tailored solutions
• Acquire and practice effective sales methodologies, including lead generation, proposal presentation, objection handling, and closing deals
• Learn to accurately identify various pest issues in residential settings, recommending appropriate and compliant treatment plans
• Proactively address client concerns, provide timely updates, and follow up to guarantee complete satisfaction with services rendered
• Become proficient in using customer relationship management software to track client interactions, schedule appointments, and manage sales pipelines efficiently
• Work closely with the pest control service team and fellow Entry Level Account Managers to ensure seamless communication and execution of treatment plans
• Continuously research and learn about new pest control methods, regulations, and industry best practices
• Contribute to the company's growth by working towards and exceeding individual and team sales goals
• Actively participate in a structured mentorship program, absorbing knowledge on pest control techniques, client management systems, and company sales strategies

Entry Level Account Manager Qualifications:

• Strong interpersonal and communication skills
• A genuine desire to help people and solve problems
• Excellent active listening and empathy
• Demonstrated ability to learn quickly and adapt to new information
• Resilience and a positive attitude in the face of challenges
• Basic computer proficiency and willingness to learn new software
• Reliable transportation to and from our office and designated territories
• Ability to work independently and as part of a team

Intrigued by our Entry Level Account Manager program? We'd love to hear your story!

This role offers a commission-based structure with no limits on how much you can earn. The advertised pay range is based on actual average annual earnings in this position. Full training is provided in order to launch your career with us.

About B-O-F Corporation

B-O-F Corporation is a leading inventor, patent-holder and designer of innovative gravity flow shelving and merchandising solutions that help grocery stores, drug stores, liquor stores, superstores, and convenience stores reduce labor costs and increase sales by rapidly advancing our customers’ merchandising effectiveness through performance and merchandising innovation.

Annual Salary Range: $75,000 - $90,000; This range reflects overall market competitiveness. Final offers are based on experience, scope, and internal alignment.

Position Summary

The Manufacturing Engineer will support the development, validation, and continuous improvement of manufacturing processes to ensure products meet quality, performance, cost, and delivery requirements. This role serves as a key technical link between Engineering, Operations, and Production, with a strong focus on part number creation, Bill of Materials (BOM) management, and manufacturing documentation.

This is an excellent opportunity for an entry-level engineer who is eager to learn in a fast-paced, hands-on manufacturing environment. The role offers broad exposure to production operations, ERP/MRP systems, engineering change management, and quality processes, while providing significant opportunities to expand SolidWorks and SolidWorks Composer skills.

This position is on-site at our facility located in Aurora, IL and would maintain a weekly schedule of Monday through Friday.

Essential Duties & Responsibilities

ERP, BOM & Documentation Management

• Create and maintain part numbers, BOMs, and routings in ERP system
• Ensure ERP data accuracy to support production, scheduling, and material planning
• Partner with Engineering, Purchasing, and Operations on engineering changes and updates
• Audit manufacturing data to prevent production delays or cost issues
• Create and maintain installation guides and work instructions using SolidWorks Composer

Manufacturing & Process Support

• Develop, validate, and sustain manufacturing processes for new and existing products
• Provide daily technical support to Production and Manufacturing teams
• Troubleshoot production, quality, and performance issues and lead corrective actions
• Support production launches, including process documentation, material readiness, and system setup
• Communicate shop floor issues to scheduling and operations teams

Engineering Change & Continuous Improvement

• Respond to shop floor questions and provide technical clarifications
• Initiate and manage Engineering Change Requests (ECRs)
• Evaluate and implement process improvements that align with quality and engineering standards
• Apply Lean Manufacturing and structured problem-solving tools (5 Why, 8D, Six Sigma)

Tooling & Quality

• Design and support jigs and fixtures in collaboration with Welding and Production teams
• Validate quality processes through data collection, testing, and documentation
• Establish product specifications, performance qualifications, and quality procedures

Qualifications & Requirements

• Bachelor’s degree in Manufacturing Engineering or a related engineering field.
• 1-3 years of experience in developing, implementing, and supporting manufacturing processes with responsibility for cost, quality, and methods.
• 1-2 years of experience using SolidWorks, with working knowledge of SolidWorks Composer.
• Extensive knowledge of GD&T and tolerance standards for SolidWorks drawings.
• Experience with MRP or ERP systems (NetSuite preferred).
• Spanish language skills are a plus.

Preferred Qualifications:

• Well-versed in Lean Manufacturing and Six Sigma methodologies.
• Experience using problem-solving tools such as 5 Why, 8D, and Six Sigma.
• Demonstrated ability to evaluate complex situations and data involving multiple variables.
• Ability to determine optimal use of resources to meet project objectives.

Work Environment

This role operates in a fast-paced, collaborative manufacturing environment that combines office-based engineering work with regular interaction on the production floor. The Design Engineer works closely with cross-functional teams, including Manufacturing, Project Management, Purchasing, and Sales, to support product development from concept through production. The position requires the ability to manage multiple priorities, adapt to changing project needs, and provide hands-on problem solving in support of manufacturing operations. Occasional travel to customer sites, suppliers, or installations may be required.

Benefits & Perks

• Two weeks of paid time off available to use upon start date
• 11 paid holidays including a floating holiday
• Hybrid work environment opportunity
• Paid volunteer day to dedicate your time to a cause of your choosing
• Affordable medical, dental, and vision insurance offerings for you and your family
• Employer-paid basic life and disability insurance
• 401(k) program with no waiting period and immediate vesting
• …and more!

Civil Earthwork Estimator (Entry-Level)

San Francisco, CA 94124 (Onsite)

• Employment Type: Full-Time
• Department: Estimating / Preconstruction
• Reports To: Chief Estimator / Estimating Manager

ABOUT US:

• One of the trusted leaders in heavy civil construction, specializing in earthwork, grading, highway infrastructure, utilities, and large-scale site development. Our projects build the foundation of transportation, energy, and public works systems across the Bay Area. We're known for delivering high-quality, cost-effective projects safely, efficiently, and with integrity — and we're looking for the next generation of construction professionals to join our team

POSITION SUMMARY:

• Are you a recent graduate with a passion for construction and civil engineering? We are seeking an entry-level Civil Earthwork Estimator to join our Estimating and Preconstruction team. This role offers a hands-on introduction to construction estimating — from learning how to read plans and perform takeoffs, to supporting bid preparation and collaborating with experienced estimators and field teams. You'll gain real-world experience, mentorship, and the opportunity to grow your career in heavy civil construction

WHAT YOU'LL DO:

• Assist the Chief Estimator in reviewing project plans, specifications, and geotechnical reports
• Perform basic quantity takeoffs for excavation, grading, and related civil work under supervision
• Help gather and organize pricing information for labor, equipment, materials, and subcontractors
• Support the preparation of bid packages, proposals, and related documentation
• Communicate with suppliers and subcontractors to obtain quotes and maintain pricing databases
• Participate in site visits, pre-bid meetings, and constructability reviews as part of your learning process
• Learn to use industry-standard estimating tools such as HCSS HeavyBid, Agtek, and Bluebeam
• Collaborate closely with project managers, field teams, and estimators to support accurate and competitive bids
• Maintain organized project files and documentation to ensure accuracy and consistency

WHAT WE'RE LOOKING FOR:

Education:

• Bachelor's degree in Construction Management, Civil Engineering, or a related field (preferred)
• Equivalent field or internship experience will also be considered

Experience:

• Up to 1–2 years of experience in construction estimating, project engineering, or field engineering (internships or co-ops welcome)
• Strong interest in civil construction, excavation, or grading operations

Skills & Attributes:

• Ability to read and interpret construction plans (training provided)
• Detail-oriented, organized, and eager to learn
• Collaborative mindset and strong communication skills
• Familiarity with construction or estimating software (HCSS, Agtek, Bluebeam) is a plus, not a requirement

WHY JOIN US:

• Competitive starting salary with performance-based growth opportunities
• Comprehensive benefits package (health, dental, vision, 401(k), etc.)
• Structured mentorship and professional development program
• A collaborative, safety-first culture built on integrity and excellence
• Opportunities to grow into senior estimating, project management, or operations roles as your career progresses

We are an equal opportunity employer, and we are an organization that values diversity. We welcome applications from all qualified candidates, including minorities and persons with disabilities.

req26-00081

Paramedic   Basic  
 
IMMEDIATE HIRING!  PARAMEDIC   FULL-TIME Opportunity  

Hourly rates starting at $25 .00+ DOE

We’re   hiring   Paramedics   that are passionate about delivering compassionate, high-quality service and basic, as well as advanced ,   patient care to our customers.  

Responsibilities:  

• Assess each call situation to   determine   the best course of action while working with progressive Paramedic protocols.  

• Utilize your Paramedic skills on medical equipment and procedures including defibrillator, EKG monitor, oxygen and suction devices, and intravenous fluids to provide advanced medical care.  

• Communicate with patients and loved ones to provide information and assurance that care is being given.  

• Act as   Paramedic   team leader and take responsibility for the scene and unit management as needed.  

• Drive the ambulance on 911 responses.  

• Work collaboratively and in a professional manner with   all allied   health and public safety personnel as well as your fellow Paramedics.

• Participate in community programs to   maintain   AMR image and   establish   strong community relations.  

Minimum Required   Qualifications :  

• High school diploma or equivalent (GED) 

• State Paramedic License  

• State Driver’s License  

• BLS, ACLS, NREMT-Paramedic  

• Driving record in compliance with company policy  

• Pass Physical Agility Test  

• Some work experience, preferably in healthcare  

Why Choose AMR? AMR is one of Global Medical Response ’s (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at .

GMR’s Core Behaviors —keep care at the center, raise your hand, seek to understand, find a way together and be accountable—unite our teams and set us apart in emergency medical services.

Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability.

Check out our careers site to learn more about our benefit options.