Entrusting Definition Jobs in Usa

• 
  
• You will install and fit parts on ships and locate positions of pieces by reference to water line, center lines, frame lines and other reference points.
  
• You will install packing, gaskets, liners and similar items where necessary.
  
• You will remove and repair or replace damaged parts of doors, hatches, and ship structures
  
• You will lay out shell, deck and bulkhead plates, I-beams, channel bar, angle bar, and other structural shapes, gun rings, struts, framing, and foundation structures and other parts from blueprints and mold loft templates.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This may be a bargaining unit position.
  
• You may be required to successfully complete a pre-appointment physical examination.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
  
• This position may require exposure to high noise levels.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

• 
  
• Clock in & out of appropriate job operations
  
• Read, interpret, and apply information from engineering drawings
  
• Adhere to job plans per job travelers
  
• Set-up multiple types of jobs
  
• Operate CNC Gear Grind Equipment (Using CBN form wheels & dressable grit wheels)
  
• Basic Maintenance of CNC gear grind machines (KAPP, Hofler, Klingelnberg)
  
• First part quality inspections
  
• Use precision measurement equipment (Use of micrometers, MBW & MOW checks)
  
• Consistently produce quality parts. (Understanding of gear terminology. LEAD, SPACING, PROFILE Etc.)
  
• Adhere to directions and instructions of direct supervisor
  
• Other duties as assigned.
  

• 
  
• High school diploma or equivalent required.
  
• Post-secondary CNC related certificate or degree preferred.
  
• Minimum of 2 years of Gear Grind operations
  
• Ability to read, understand and correctly interpret blueprints, planning and manufacturing specifications.
  
• Thorough understanding of or the ability to quickly learn production equipment.
  
• Strong analytical and problem-solving skills.
  

• 
  
• Ability to use hand tools.
  
• Physical ability to operate and repair machines.
  
• Prolonged periods of standing, walking, bending, or stretching
  
• Work may require bending, carrying, lifting to fifty (25) pounds, pulling, pushing, and standing.
  
• Assistance is required for lifting over 25 pounds.
  

• 
  
• 15 Days Paid Time Off (annual allotment), Prorated PTO based on date of hire
  
• Company Paid Holidays
  
• Volunteer PTO Program
  
• 2nd Shift hourly positions receive 15% shift Premium
  
• Health Insurance starting on your first day
  
• Company Paid Short Term Disability, Long Term Disability, Life Insurance, Accidental Death, and Dismemberment (AD&D)
  
• Paid Parental Leave
  
• Employee Assistance Program
  
• 401(k) Match (75% match up to 6%)
  
• Company Employee Relations Team Events (i.e., Holiday Party, Family trunk or treating, Car Show and much more!)
  
• Recognition and Service Award Programs
  
• Educational Assistance Program
  
• Employee Referral Program
  
• Onsite Fitness Center - Free!
  
• Climate controlled environment
  

• Integrity - Do the right thing for our stakeholders. We value safety, diversity, and respect.
• Teamwork - Win as One team-one company. Solicit help and assist others.
• Continuous Improvement - Pursue zero defect quality. Attack problems and relentlessly raise the bar.
• Innovation - Passion for growing the business. Lead through ingenuity and entrepreneurship.
• Act with Velocity - Partner, anticipate and communicate. Proactively solve problems.
  

Aera Technology is a pioneer in the growing category of Decision Intelligence the technology to digitize, augment, and automate decision-making processes with AI and machine learning. Through our AI decision automation platform, Aera Decision Cloud, we are helping the best-known brands in the world make smarter, faster decisions.

Privately-held and VC-funded, we have a global team of over 400 Aeranauts and we're growing. We deliver Decision Intelligence innovation and services that enable enterprises to automate and scale decision making with accuracy and speed. We continue to be the trusted choice of market leaders for our proven ability to generate value and unlock opportunities that were previously unattainable.

As a Client Partner, you will partner with senior executives at the most recognized companies in the world to drive adoption of our game-changing platform. Employing a consultative, value-driven approach to sales & client management, you will identify and cultivate new opportunities, manage a robust pipeline, develop, and execute account-specific strategies to close large strategic deals, with new and existing clients, owning overall responsibility for the client relationship. You bring a strategic, consultative mindset and a strong point of view on how to create and sustain value to the table.

The ideal candidate will be based out the NY/NJ area.

• Identify new business (Hunting) by identifying, qualifying, and closing new SaaS opportunities
• Meet and exceed quarterly and annual sales ACV bookings targets
• Develop and maintain strong relationships with key decision makers
• Actively seek out new business opportunities to develop pipeline
• Stay current on industry trends and market developments
• Work closely with cross-functional teams to ensure seamless sales processes and successful transition to client implementation

• Must be based in the New York or New Jersey areas
• A player with 7+ years experience serving large enterprise customers
• Experience in industrial verticals (e.g. manufacturing, chemicals) with a focus on the following domains: Supply Chain / Planning / Data Analytics
• Solid track record in either management consulting or enterprise software sales, with successful engagements with the C-suite, account development and net new sales
• Excellent communication, presentation, negotiation, and interpersonal skills
• Ability to work in a fast-paced, dynamic, high-growth environment and meet tight deadlines
• Bachelor's degree in a STEM or Business related field

• Strong understanding of the chemicals and/or manufacturing industries
• Network of contacts in the field
• Background in Data Analytics / Planning / ML/AI a definite plus
• Supply Chain or Finance experience a plus

$200,000 - $220,000 a year

Compensation for this position consists of $220,000+ salary + 10-12% commission on all NNARR (uncapped) + Meaningful equity. OTE is $350,000 - $400,000. Actual compensation offered will vary based on a number of factors including prior experience and location. Commission is based on sales performance and is not guaranteed. Equity value is subject to company valuation and vesting requirements.

If you share our passion for building a sustainable, intelligent, and efficient world, you're in the right place. Established in 2017 and headquartered in Mountain View, California, we're a series C start-up, with teams in Mountain View, San Francisco (California), Bucharest and Cluj-Napoca (Romania), Paris (France), Munich (Germany), London (UK), Pune (India), and Sydney (Australia). So join us, and let's build this!

Aera Technology is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender perception or identity, national origin, age, marital status, protected veteran status, or disability status. Pursuant to the San Francisco Fair Chance Ordinance, Aera Technology will consider for employment qualified applicants with arrest and conviction records.

Benefits Summary

At Aera Technology, we strive to support our Aeranauts and their loved ones through different stages of life with a variety of attractive benefits, and great perks. In addition to offering a competitive salary and company stock options, we have other great benefits available. You'll find comprehensive medical, vision and dental plans, a 401K plan, flexible paid time off, remote work reimbursement, generous parental leave, and much more. We offer unlimited access to online professional courses for both professional and personal development, coupled with people manager development programs. We believe in a flexible working environment, to allow our Aeranauts to perform at their best, ensuring a healthy work-life balance. When you're working from the office, you'll also have access to a fully-stocked kitchen with a selection of snacks and beverages.

We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

• 
  
• Once properly trained and/or certified, perform specific tasks including but not limited to, soldering, hardware installation, post coating.
  
• Under close supervision, inspects own work performed to ensure a quality product which conforms to workmanship standards, engineering requirements and design specifications.
  
• Perform in accordance with productivity expectations to meet customer deadlines.
  
• Comply with all rules and regulations of Raytheon Technologies, including, but not limited to: Environmental Health and Safety, Ethics and Compliance, Quality, and attendance requirements.
  
• Participate in cost reduction plans and continuous improvement plans/events, as required.
  
• Participate in audits.
  
• Acquire applicable skill/knowledge/certifications and complete trainings as required.
  
• Maintain materials, equipment, and work area in a clean and orderly condition.
  
• Report to lead or supervisor on work progress and updates.
  
• Complete assigned tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual skills.
  
• Must be able to pass a soldering assessment after training course provided.
  
• Other duties as assigned.
  

• 
  
• Typically requires HS Diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline.
  
• U.S. Person (U.S. citizen, permanent resident, refugee or asylee) or eligible to obtain necessary export authorizations required.
  

• 
  
• Career Readiness Certification (CRC) strongly preferred.
  
• The ability to interpret schematics and/or technical drawings
  
• The ability to successfully complete training modules associated with job grade.
  
• The ability to follow assembly instruction.
  
• The ability to effectively work in an environment requiring repetitive job responsibilities.
  
• The ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
  
• The ability to understand end uses of products being built.
  
• Strong written and verbal communication skills.
  
• Attention to detail in order to ensure safety and quality.
  
• Strong organizational skills and ability to multi-task.
  
• The ability to work in a team to support work capacity in a fast-paced environment.
  
• Intermediate computer skills in terms of typing, navigating screens and learning new software programs.
  
• Demonstrated analytical skills and problem-solving abilities.
  
• The ability to take direction from more experienced coworkers, leads and supervisors.
  
• May be standing and/or sitting for 8+ hours.
  
• Overtime eligible
  

• 
  
• Medical, dental, and vision insurance
  
• Three weeks of vacation for newly hired employees
  
• Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option
  
• Tuition reimbursement program
  
• Student Loan Repayment Program
  
• Life insurance and disability coverage
  
• Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection
  
• Birth, adoption, parental leave benefits
  
• Ovia Health, fertility, and family planning
  
• Adoption Assistance
  
• Autism Benefit
  
• Employee Assistance Plan, including up to 10 free counseling sessions
  
• Healthy You Incentives, wellness rewards program
  
• Doctor on Demand, virtual doctor visits
  
• Bright Horizons, child and elder care services
  
• Teladoc Medical Experts, second opinion program
  
• And more!
  

• 
  
• You will lay out shell, deck and bulkhead plates, I-beams, channels, angles, pipe and round bar and various other structural shapes, gun rings, struts, framing and various foundation structures and other parts from blueprints and templates.
  
• You will cut and shape plates, beams and other heavy metal structural shapes, using various shop machinery.
  
• You will use precision tooling such as micrometers, feeler gauges and torque wrenches for meeting required tolerances per technical work documents when required.
  
• You will report to supervisors on the status and progress of work, nature of work delays and answer questions on overall work operations and problems.
  
• You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This is a bargaining unit position.
  
• You will be required to obtain and maintain a current valid United States driver's license.
  
• You may be required to successfully complete a pre-appointment physical examination and undergo recurring physical examinations.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
  
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• You will be required to obtain and maintain a U.S. Passport.
  
• This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.
  
• This position requires the ability to lift and/or carry loads or items up to 50 pounds in weight.
  
• This position may require rotating shift work.
  
• This position requires the ability to climb vertical ladders and work in awkward positions and confined spaces.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

• 
  
• You will provide guidance and direction to Shipfitter shop personnel.
  
• You will provide instruction for nuclear or non-nuclear work of the Structural Group personnel in the skills of the trade.
  
• You will prepare analysis of trade requirements through the use of audits, surveillance, and/or incident reports.
  
• You will provide interpretations and problem resolution for shop employees.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This may be a bargaining unit position.
  
• You may be required to successfully complete a pre-appointment physical examination.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
  
• This position may require exposure to high noise levels.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

Job Title: Route Driver (Box Truck) - Experienced

Company/Location: Nico Products / Minneapolis MN

Shift: 6:30am - 2:30pm M-F + OT as needed

Pay: $29 - $33 / hour + DOQ

Signing Bonus: $1500

(Employment/staffing agencies - please do not reach out about this ad. We only hire direct.)

____________________

Attendance matters: This role directly impacts customer delivery schedules. We depend on you being here every scheduled day, on time, and ready to work.

Strict security protocols: Personal mobile devices must be locked up during shifts (available only on breaks and in designated areas). Unless device is supplied by the company.

Warehouse environment: Although this is a driving role, you will work in a warehouse/manufacturing setting with exposure to heat, humidity, dust, and noise. This is hands-on, active work. We have a clean warehouse and are compliant with OSHA, Federal, and State regulations.

We conduct in-person interviews only: This position is on-site only and located in Minnesota. We do not conduct virtual interviews. If you do not currently reside in MN, you must have definite relocation plans in place before being considered for an interview. There is a place to explain in the screener questions included with this ad.

____________________

About this Role

Drive box truck to/from customers to deliver/pick up parts. This role represents our company well to our customers. Performs in-plant operations utilizing forklift such as loading and unloading trucks, moving raw and finished product to and from production areas, and places items in designated areas in the warehouse.

____________________
Key Responsibilities

• Class B License with DMV health card
• Follow DOT regulations
• Clean driving record
• Strong directional sense or working knowledge of the local area highway system
• Customer service type attitude representing the company to our customers
• High school diploma or GED (preferred)
• 1 year shipping and receiving experience
• Forklift certification a plus
• Good organizational skills and the ability to follow multiple tasks simultaneously
• Strong verbal and written communication skills. This is a customer service position
• Ability to maintain a regular and reliable attendance record
• Consistent legible writing skills
• Basic typing and computer skills helpful
• Fluency in reading, writing, speaking, and understanding the English language
• Ability to lift and move 1-50 lbs as needed
• Ability to interact with customers, co-workers and supervisors in a cooperative manner
• Ability to work independently with little or no supervision

____________________

Duties and Responsibilities

• Maintain daily inspection log for company truck.
• Make sure necessary repairs and preventative maintenance are promptly scheduled.
• Provide feedback on route efficiency, and any customer issues or complaints.
• Ensure that POD is secured and returned to plant on all delivered products.
• Represent the organization in a courteous, professional, and presentable manner at all times. This position has a high degree of customer contact.
• Assist in shipping and receiving department when not on the truck.
• May Pick up unfinished work at our customers and/or deliver finished work to our customers.
• Other duties and responsibilities as assigned

____________________

What We Offer (Perks & Benefits)We invest in people who invest in their work.

• Competitive Pay and Signing Bonus
• Work-Life Balance: Generally work a short day on Fridays
• Reviews & Raises: Performance reviews at 60 days, 6 months, then twice a yearraises available if expectations are met
• Bonuses: Quarterly profit-sharing
• Paid Time Off: Holidays, PTO, Sick & Safe time, and an extra paid day off for your work anniversary
• Retirement Support: 401k with company contributions
• Insurance Coverage: Medical, Dental, Vision, Life insurance, Long-Term Disability, Pet, FSA, and more!
• Paid Extras: Prescription safety glasses, safety boots, referral bonuses, and more

____________________

APPLICATION PROCESS:

• Upload a current resume & answer the questions provided (completing this task provides a little insight into you and helps us determine the best candidates to interview). Thoughtful answers are expected.
• No need to reach out and verify if the application was received. If you receive an email/text response when you submitted the application, then you'll know it was received. Contacting HR does NOT increase chances of an interview.
• If you are selected for an interview, you will be contacted via text/email. (As part of our selection process, while onsite for an interview, you MUST PASS A BASIC MATH TEST within 10 minutes to move on to the interview phase.)
• Expect a response within 14 days of your application.

Communication & Privacy Notice

If selected for an interview, you will be contacted via text or email. All information provided will solely be used for the hiring process. We do not sell or share applicant information for marketing purposes.

Security: This position operates within a a secure manufacturing facility. All employees must adhere to strict security policies including restrictions on personal electronic devices, access control, and documentation procedures.

Equal Opportunity Employer. The Lindgren Group, including Avtec Finishing and Nico Products, is an equal opportunity employer and is committed to creating an inclusive environment for all employees. Veterans are encouraged to apply!

Work Authorization / Security Clearance:

The Lindgren Group must comply with ITAR (International Traffic in Arms Regulations). These regulations may restrict persons of non-US citizen status from working/participating/observing/or other forms of gathering knowledge about certain activities within the company.

Disclaimer:

This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time, with or without notice.

For more information on our company, visit:

Everything we do is underscored by a why and that why is one another.

Location: Altru Clinic | Crookston 400 S. Minnesota St. Crookston, MN 56716 Pay Range: $20.75 - $31.12

Summary: The Medical Assistant answers the telephone and routes calls, prepares patients for exams and assists with procedures. This position identifies basic signs and symptoms of deviations from normal health status and provides basic information and reports to the nurse. The Medical Assistant assures lab work, tests, procedures and surgeries are scheduled and notifies pre-authorization and hospital of applicable cases.

Essential Job Functions:

• Answers telephone and directs calls as appropriate in a prompt manner. Prepares patients for exams and assists with procedures, per provider request.
• Reports the patient's self-report/symptoms of pain promptly according to standard operating procedure.
• Gathers and documents relevant information about the patient's visit using information from the patient/patient's family and previous medical records.
• Assures lab work, tests, procedures and surgeries are scheduled according to standard operating procedure. Follow standard operating procedures for pre-authorization and hospital of applicable cases.
• Identifies basic signs and symptoms of deviations from normal health status and provides basic information which licensed nurses use in identification of problems and needs.
• Administers medication using the 6 Rights and according to standard operating procedure.
• Demonstrate competency and ability to carry out department functions including location, set-up and use of equipment used for the assigned area.
• Performs other duties as assigned or needed to meet the needs of the department/organization.

• Medical Assistant Certified | American Association for Medical Assistants | Prior to Start Date | HR Primary Sources
• Medical Assistant Certified | National Heathcareer Association (NHA) | Prior to Start Date | HR Primary Sources
• Medical Assistant Certified | National Center for Competency Testing (NCCT) | Prior to Start Date | HR Primary Sources
• Medical Assistant - Registered | American Medical Technologist (AMT) | Prior to Start Date | HR Primary Sources
• Basic Life Support (BLS) | American Heart Association (AHA) | Within 90 days of Start Date | Learning Management System

• Prior to Start: Must be certified in one of the following: AAMA, NHA or NCCT or Registered with AMT.

Language Requirements: This position requires proficiency in reading, writing, and speaking English to ensure effective communication in the workplace and with patients, families, and team members.

Physical Demands:

• Sit: Frequently (34-66%)
• Stand: Frequently (34-66%)
• Walk: Frequently (34-66%)
• Stoop/Bend: Occasionally (5-33%)
• Reach: Continuously (67-100%)
• Crawl: Rarely (1-4%)
• Squat/Crouch/Kneel: Frequently (34-66%)
• Twist: Occasionally (5-33%)
• Handle/Finger/Feel: Continuously (67-100%)
• See: Continuously (67-100%)
• Hear: Continuously (67-100%)

Weight Demands:

• Lift -Floor to Waist Level: Medium (20-40 pounds)
• Carry: Medium (20-40 pounds)
• Push/Pull: Medium (20-40 pounds)
• Slide/Transfer: Medium (20-40 pounds)

Working Conditions:

• Indoor: Continuously (67-100%)
• Outdoor: Not Applicable
• Extreme Temperature: Not Applicable

Driving Requirement Definitions:

• Professional Drivers: Persons who drive as their main responsibility OR transport passengers or hazardous materials.
• Frequent Drivers: Persons whose main responsibility is not driving, but drive daily or almost daily.
• Occasional Drivers: Persons who drive from once per month to as frequently as once per week.
• Infrequent Drivers: Persons who are generally not expected to drive.

Driving Requirement for this position: Infrequent Driver

Making a real difference. For one another.

To take the best care of our patients and community including friends, family, and neighbors we need people who are committed to growth, excellence, and one another.

At Altru, you'll find a culture where support and teamwork are at the heart of what we do. You'll have opportunities to advance your skills, work with the latest technologies, experience the fulfillment that comes from giving back, and take your career wherever you want it to go.

Join our team and be a part of a small community with a big heart.

Altru offers a comprehensive benefits package to its full- and part-time employees. Excellent benefits include a health plan and 401(k) retirement plan. Other benefits include a dental plan, vision plan, life and disability insurance, education assistance, paid time off (PTO)

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Raytheon is an industry leader in Stealth Technology. We are involved in all phases of development, production, and maintenance of Low Observable (LO) weapon systems. We are currently looking for Stealth / Low Observable / Radar Cross Section (RCS) / Signature Management / Survivability Engineers to work on challenging, state of the art technical projects

Do you have a passion for LO technology?

Would you enjoy working at both an outdoor RCS range and a large indoor RCS chamber to support our nation's security?

If you answered "yes" to these questions, our Signature Management & Technology team at our Tucson, AZ, facility wants to hear from you!

What You Will Do

We are seeking mid to senior career Engineers to join the Signature Management & Technology Team. At Raytheon, you will be part of a team whose responsibilities span the full lifecycle of the product- from initial conceptual design to modeling and analysis, from component to missile level RCS testing, and production support to maintainability.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience.
• Eight (8) years experience in calibrating, operating, and trouble shooting instrumentation radars for far field RCS measurements
• Experience using RCS processing software for data analysis

• Experience operating and maintaining Resonant Sciences Radarman II instrumentation radar
• Experience operating near field radar systems
• Experience with range certification/registration process and management of the range handboo

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Relocation Eligibility

Learn More & Apply Now! (Optional)

Please consider the following role type definition as you apply for this role.

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Raytheon is an industry leader in Stealth Technology. We are involved in all phases of development, production, and maintenance of Low Observable (LO) weapon systems. We are currently looking for Stealth / Low Observable / Radar Cross Section (RCS) / Signature Management / Survivability Engineers to work on challenging, state of the art technical projects

Do you have a passion for LO technology?

Would you enjoy working at both an outdoor RCS range and a large indoor RCS chamber to support our nation's security?

If you answered "yes" to these questions, our Signature Management & Technology team at our Tucson, AZ, facility wants to hear from you!

What You Will Do

We are seeking mid to senior career Engineers to join the Signature Management & Technology Team. At Raytheon, you will be part of a team whose responsibilities span the full lifecycle of the product- from initial conceptual design to modeling and analysis, from component to missile level RCS testing, and production support to maintainability.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience.
• Eight (8) years experience in calibrating, operating, and trouble shooting instrumentation radars for far field RCS measurements
• Experience using RCS processing software for data analysis

• Experience operating and maintaining Resonant Sciences Radarman II instrumentation radar
• Experience operating near field radar systems
• Experience with range certification/registration process and management of the range handboo

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Relocation Eligibility

Learn More & Apply Now! (Optional)

Please consider the following role type definition as you apply for this role.

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms