Engineering Village Jobs in Hell, MI

Job ID: 516974

Oldcastle® APG, a CRH Company, is North America’s leading provider of innovative outdoor living solutions that enable customers to Live Well Outside. The manufacturer’s portfolio of premier building products inspires endless possibilities while providing enduring outdoor spaces where people can connect, reflect and recharge. Award-winning brands include Belgard® hardscape, Echelon® Masonry, MoistureShield® composite decking, RDI® railing, Catalyst™ Fence Solutions, Sakrete® packaged concrete, Amerimix® mortar, Pebble Technology International® pool finishes, Lawn & Garden mulches and landscape features, and Techniseal® sands and sealant technologies.

Job Summary

The Manufacturing Manager is responsible for leading and integrating all non-production support functions that are essential to the safe, efficient, and high-quality operation of the plant. This role has direct ownership of site-level performance in quality, safety, engineering, processing, mix operations, and tooling. The Manufacturing Manager partners closely with production leadership to drive continuous improvement, ensure regulatory and corporate compliance, and support operational excellence across all manufacturing processes.

Job Location

• This is an onsite role based in Flint, MI

Job Responsibilities

• Provide strategic and tactical leadership to site-level quality, safety, engineering, processing, mix, and tooling teams
• Ensure alignment with corporate policies, industry standards, and applicable regulatory requirements
• Develop and maintain systems that support product quality, workplace safety, and process capability
• Establish clear performance expectations and accountability across all support functions
• Lead root cause investigations and implement corrective and preventative actions for quality and safety incidents
• Oversee the development and control of mix formulations, process parameters, and tooling readiness to support production needs
• Support the introduction of new products, processes, and technologies, ensuring smooth integration into existing operations
• Collaborate with maintenance teams to ensure equipment and tooling are optimized for performance, reliability, and safety
• Identify and implement processing improvements to reduce waste, improve product quality, and enhance workplace safety
• Lead or support kaizen events, value stream mapping, and other lean manufacturing initiatives
• Monitor key performance indicators and drive data-based decision-making across support functions
• Foster a culture of continuous improvement and operational discipline
• Ensure full compliance with OSHA and other applicable federal, state, and local regulations
• Maintain audit readiness and lead internal and external audits related to quality, safety, and environmental compliance
• Develop and enforce risk mitigation strategies to reduce operational, environmental, and safety risks
• Promote a proactive safety culture through training, engagement, and visible leadership

Job Requirements

• Bachelor’s Degree in Engineering, Operations Management, or related field required
• 5+ years of experience in manufacturing or industrial operations, with at least 3 years in a leadership or supervisory role
• Demonstrated experience in managing or collaborating with quality, safety and engineering functions
• Strong knowledge or lean manufacturing principles, Six Sigma tools, and quality management systems
• Familiarity with OSHA and other regulatory frameworks
• Effective leadership, coaching, and team development skills
• Strong analytical and problem-solving abilities
• Excellent communication, organizational, and interpersonal skills
• Proficiency in Microsoft Office and ERP systems (SAP preferred)

What CRH Offers You

• Highly competitive base pay
• Comprehensive medical, dental and disability benefits programs
• Group retirement savings program
• Health and wellness programs
• An inclusive culture that values opportunity for growth, development, and internal promotion

About CRH

CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization.

If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!

Oldcastle APG, a CRH Company, is an Affirmative Action and Equal Opportunity Employer.

EOE/Vet/Disability

CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

Compensation: $90,000 – $100,000 per year

Location: Grand Rapids, MI

Benefits:

• Comprehensive health insurance
• Dental and vision coverage
• Paid holidays
• Paid time off (PTO)
• 401(k) retirement plan

Position Summary

We are seeking an experienced Senior Mechanical Estimator to lead cost estimating efforts for complex mechanical construction projects. This role is responsible for developing accurate, competitive estimates for HVAC, plumbing, piping, and fire protection systems while supporting preconstruction strategy and project success.

The ideal candidate brings strong technical knowledge, sound judgment, and leadership capability, with the ability to mentor junior estimators and collaborate effectively across engineering and project management teams.

Key Responsibilities

• Prepare accurate cost estimates and budgets for mechanical systems
• Review drawings, specifications, and design documents
• Identify risks and provide value-engineering recommendations
• Mentor junior estimators and review their work
• Collaborate with engineering and project management teams during bid development

Qualifications

• Bachelor’s degree in Mechanical Engineering, Construction Management, or a related field (preferred)
• 3–5+ years of experience as a mechanical estimator in the construction industry
• In-depth knowledge of HVAC, plumbing, piping, and fire protection systems
• Proficiency with estimating software and Microsoft Office Suite
• Strong analytical, mathematical, and problem-solving abilities

Why Join Us?

• Be part of a respected mechanical construction organization with a strong regional presence
• Competitive salary
• Supportive, team-oriented culture with opportunities for professional growth and advancement

Job Title: Automotive Training and Development Consultant

Duration: 12 Months (Possibility of extension)

Location: Detroit, Michigan

Client is looking for an Automotive Training & Development Consultant located in the Detroit, Michigan area.

This position is responsible for analysis, research, development and delivery of manufacturing processes and technical launch training with on-site support to OEM vehicle assembly plants in the US, Canada and Mexico.

Roles and responsibilities include:

• Provide on-site training and support at each of the OEM vehicle assembly plants
• Instruct and consult plant process and repair personnel to improve their understanding of the vehicle and its highly intricate and interconnected systems and subsystems
• Present and demonstrate efficient and effective methods of diagnosing and correcting vehicle assembly, vehicle electrical systems and sub-system deficiencies
• Conduct root cause analysis to accurately identify the cause(s) of assembly and vehicle deficiencies
• Act as the training liaison between product/manufacturing engineering and general assembly by creating, designing and developing training materials related to vehicle assembly process, electrical harness manufacture, vehicle electrical system architectures and schematics
• Communicate and share lessons learned, developed training materials and information gathered in support of one plant project with remaining plants on a timely basis
• Analyze and identify future training needs for each of the OEM vehicle assembly plants
• Support and participate in plant launch meetings and provide training reports to Raytheon management, the OEM management and OEM launch teams
• Interface with engineering, component suppliers and vendors to validate and develop training materials for the manufacturing process, vehicle and vehicle electrical sub-systems prior to the Start of Regular Production (SORP)
• Research and compile manufacturing processes and technical information to be included in training course materials, such as, but not limited to engineering schematics, work in process service information, engineering documents, engineering math data and manufacturing reports

Required Skills:

• Minimum four years of experience as an automotive instructional designer, training developer, automotive instructor and/or manufacturing instructor
• Demonstrated knowledge of automotive systems from an advanced diagnostics perspective
• Demonstrated knowledge of OEM manufacturing tracking and reporting systems
• Demonstrated knowledge of OEM manufacturing dynamic vehicle testing systems
• Ability to develop professional training materials using pre-launch documents
• Ability to read and interpret a digital multimeter, OEM diagnostic scan tool and other automotive related diagnostic test equipment
• Ability to effectively conduct one-on-one and group presentations Ability to interpret early engineering level electrical schematic diagrams
• Ability to read OEM supplier electrical harness prints
• Strong working knowledge of Microsoft Office
• Extensive travel flexibility. Upward of 75% travel, depending upon launch
• Ability to work independently without supervision
• ASE certifications
• Demonstrated presentation skills delivering process and technical training
• Automotive technical assistance center experience

Required Education:

• Associate's degree or Certificate in Automotive Technology, engineering or other related discipline
• High school diploma with eight years of experience as an automotive instructional designer, training developer, automotive instructor and/or manufacturing instructor may be considered in lieu of an associate’s degree

Howmet Aerospace, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation.

This off-shift position is located within our Plant 3 – Whitehall Casting Operation and will direct and motivate the manufacturing work force to produce products of high quality in the most efficient and safe manner and ensure that scheduling meets business and customer needs.

Job Roles

• Anticipation--asks questions to understand needs of multiple stakeholder groups; prepares operation for optimal execution; contributes as a strategic partner to planning process
• Reliability--leads by example; provides goal and measurement information to others; facilitates safe environment; works effectively within parameters of bargaining unit contract
• Optimizer--improves processes; executes production for maximal output; eliminates waste; increases quality; aligns activity and resources to desired outcomes; sets others up for success
• Facilitator--interacts with internal and external stakeholders at multiple levels; furnishes accurate instructions to others; acts as liaison between planning, management and execution elements of the business
• Responsiveness--deals effectively with the unforeseen; modifies labor schedule or other variables as needed based on circumstances
• Influence-- delegates effectively; capable of explaining the “why” behind a recommendation or directive; advocates for the business; maintains approachability; deals with conflict and change effectively
• Organization and structure--plans daily; coordinates to deliver on time; ensures efficiencies while balancing priorities of multiple projects and stakeholder groups; has contingency plans
• Observation--sees and hears through the lens of performance; enables accuracy in scheduling, quality in production and relationship with customers; makes recommendations and changes based on patterns and data; monitors for feedback and communicates findings; sees physical and personnel issues and acts on observations; has a “finger on the pulse” of what occurs within the plant
• Ownership--accepts accountability for the performance of others and the business; inspires ownership and improvement in others; invites measurement

Responsibilities

• Supervises an effective team; includes planning and holding meetings, preparing and conducting performance appraisals as appropriate, managing staffing levels (including vacations, overtime, and leaves of absences), assisting with career development (motivates, coaches, and trains to acquire maximum quality, productivity, morale, and cooperation), approving time and attendance, and prioritizing and making work assignments.
• Provides effective feedback to employees, both positive and negative. Maintains appropriate documentation for all disciplinary actions taken.
• Provides training and mentoring to new Supervisors.
• Directs training and orientation of employees to ensure EHS rules are known and understood, to improve work performance, and acquaint employees with company policies and procedures.
• Maintains compliance with the collective bargaining agreement. Interfaces between management and union officials. Handles grievances.
• Ensures compliance with company policies, procedures, and practices.
• Schedules production and work teams.
• Reviews production and operating reports and resolves operations, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays.
• Promotes EHS and continuous improvement initiatives and culture.
• Implements ABS principles and initiatives and is the 6S program leader.
• Interacts with their employees and other departments in order to manage the flow of product through the operation.
• Maintains inventories, as applicable.
• Creates a total awareness among assigned employees of Company policies, regulations, procedures, and business initiatives. Enforces compliance and acts as a positive resource for information and questions.
• Responds to emergencies. Assists in troubleshooting production problems. Investigates and analyzes. Initiates or recommends actions to correct deviations and variables affecting schedules, costs, quality, and other factors.
• Prepares and analyzes documentation as required (i.e. production reports, log sheets, etc.).
• Reviews work procedures for safety regulations and concerns.
• Plans, develops, and implements new methods and procedures designed to improve operations, minimize operating costs, and effect greater utilization of labor and materials.
• Confers with management, engineering, and quality control personnel to resolve maintenance problems and recommend measures to improve operations and conditions of machines and equipment.
• Performs audits for safety compliance; facilitates the 6S audit program.
• Assists with budget and goal setting of the operation.
• Complies with all EHS rules required for the work environment.
• Performs other duties, as assigned.

Qualifications

Basic Qualifications:

• High School Diploma or GED from an accredited institution
• Minimum of 3 years leadership experience.
• Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.

Preferred Qualifications

• Experience supervising in a manufacturing environment.
• Experience with TPM, Synchronous Mfg., and Kaizen Concepts.
• Must be able to communicate effectively with all levels of the organization, have good team building skills, excellent people skills; ability to handle multiple tasks, technically oriented.
• Must be energetic and a self-starter, able to promote and implement change, have good PC skills, good telephone skills, strong organizational skills, and ability to promote a continuous improvement atmosphere.

About Us

Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube.

Equal Opportunity Employer:

Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.

If you need assistance to complete your application due to a disability, please email

Company Description

Old Mission Ascend Partners (OMAP) empowers elite clinicians to build prosperity by providing an innovative "Business-in-a-Box" framework for launching and scaling Micro-MSOs. As the venture arm of the Old Mission ecosystem, OMAP removes the traditional barriers of launching a private practice by offering a vertically integrated support system. This includes clinical protocols, proprietary technology, lead generation, SEO assets, and access to top-tier regenerative biologics. With a mission to enable clinicians to own 100% of their practices and focus on care, OMAP drives the future of Sovereign Medicine with tools like seed funding and startup capital. Located in Traverse City, MI, OMAP is committed to providing the foundation for clinicians’ entrepreneurial success.

Managing Director | Old Mission Ascend Partners (OMAP)

Location: Traverse City, MI (Hybrid/Regional)

Experience: 7+ Years in Healthcare Business Development / MSO Management Background: Physician Assistant (PA) or Nurse Practitioner (NP) with Ortho or ER Experience

The "Un-Job" for the "Un-Clinician"

If you are looking for a comfortable, 9-to-5 clinical management role at a regional health system, close this tab now.

We are Old Mission Ascend Partners (OMAP), and we are built for the clinician who is tired of being a "line item" on a hospital's balance sheet. We have built the "Growth Engine for Independent Practice"; a Micro-MSO startup designed to liberate clinicians from the grind of a 'job'. We are looking for a Physician Assistant or Nurse Practitioner to serve as the Managing Director (Founder) of our Traverse City startup spoke.

This is a Leadership mandate. We need an Ortho-trained proceduralist or an ER clinician who is addicted to high-stakes execution, unfazed by the chaos of a startup, and ready to build a business unit from a blank sheet of paper.

The Mission: Founder & General

As the Managing Director, you are the "Founder" of this Spoke. You aren't just managing a clinic; you are launching a high-margin business unit. You will leverage the "Shared Services" of our Hub (Payroll, Logistics, Tech) to remain lean while scaling at speed.

• Build the Engine: Personally architect and execute the sales strategy to recruit independent clinicians into the OMAP ecosystem.
• Protocol Enforcement: Ensure every partner adheres to our clinical and operational blueprints to maintain ecosystem integrity.
• P&L Ownership: Maintain total responsibility for the OMAP bottom line, managing expenses and maximizing revenue.
• The 60/40 Rule: Drive the unit to hit specific revenue targets where 60% goes to the provider and 40% remains for Spoke OpEx and Hub Fees.

Who You Are (The DNA)

• The Clinical Pedigree: You are a PA or NP with deep roots in Orthopedics or Emergency Medicine. You understand procedural medicine, you make decisions in seconds, and you don't flinch under pressure.
• The Track Record: You have 7+ years in healthcare business development or medical group operations, with a proven history of managing a P&L of at least $5M+ TCV.
• Startup Soul: You aren't afraid of failure—you’re afraid of being average. You see "limitless potential" in building something that disrupts the legacy Fee-For-Service model.
• Radical Transparency: You lead with the data. You build trust through unvarnished, honest communication with partners and staff.

The Payoff (70/30 Profit Participation)

We don’t believe in salary caps for founders.

• Base Salary: $140,000
• The Profit Pool: Once the Spoke is profitable (covering all OpEx and Hub Fees), 70% of the remaining Net Profit goes into the Spoke Performance Pool.
• The Managing Director Share: You earn a 20% share of that 70% pool.
• The Traction Multiplier: Execute your "Rocks" at a 90%+ completion rate, and your payout is multiplied by 1.1x.
• The Upside: Annual variable compensation is uncapped, up to 100% of your Base Salary.

The Benefits

• Unlimited PTO: We measure profitability and outcomes, not "clock-in" time.
• Elite Coverage: 100% medical/dental/vision premiums for the employee; 50% for dependents.
• 401(k) Match: Up to 4% company match.
• Professional Development: A dedicated budget for entrepreneurial leadership and MSO training.

Do you have the stomach to build something from scratch in Traverse City? Apply Now.

Pay: $140,000.00 per year

Benefits:

• 401(k) matching
• Dental insurance
• Health insurance
• Paid time off
• Professional development assistance
• Vision insurance

Work Location: Prefer Traverse City, MI and open to Michigan and other states.

A prominent manufacturing company in the Metro Detroit area is seeking a Sr. Mechanical Designer to join their team. This is a direct hire position! The Senior Mechanical Designer is responsible for managing design engineering projects and supporting the planning and development of design capacities and capabilities at the company. This role involves overseeing mechanical design planning and implementation, ensuring compliance with specifications, codes, and job order requirements.

Duties and Responsibilities:

• Direct and coordinate mechanical design planning and implementation, ensuring compliance with specifications, codes, and job order requirements
• Create final designs of proposed drawings, checking dimensions, sizes, equipment lists, and specifications utilizing CAD software
• Provide expertise and guidance in identifying, analyzing, and resolving mechanical design problems
• Generate conceptual designs for assigned projects
• Maintain up-to-date mechanical engineering knowledge and stay informed about industry trends and best practices
• Collaborate with department supervisors to ensure the feasibility of designs and available resources to support them
• Direct, review, and approve project designs and manufacturing process planning
• Support the improvement of manufacturing capabilities and capacities
• Conduct designer performance reviews in accordance with HR policies
• Consult with clients to prepare project specifications
• Perform other relevant duties as assigned.

Qualifications:

1. Minimum Education Requirements: Technical diploma with a minimum of five years of management experience in a design engineering role.
2. Preferred Education: Engineering degree in Mechanical or Manufacturing Engineering. P.Eng designation and PMP Designation are assets.
3. Experience: Minimum 5 years in a related role.

Additional Skills/Software:

1. Experience with automotive interior manufacturing equipment.
2. Familiarity with automation and Robotics integration.
3. Proficiency in Microsoft Office Software.
4. CAD software proficiency, including Catia CAD and SolidWorks CAD.
5. Experience with MS Project and MS Visio.

At Rite-Hite, your work makes an impact. As the global leader in loading dock and door equipment, we design and deliver solutions that keep our customers safe, secure, and productive. Here, you'll find innovation, stability, and the chance to grow your career as part of a team that's always looking ahead.

PURPOSE

This position is responsible for supporting the design, order entry and manufacturability of products through the system by creation and maintenance of manufacturing configurators, bill of materials and pricing rules. This position is also responsible for system/process procedure documentation and user training.

ESSENTIAL DUTIES AND RESPONSIBILITIESinclude the following. Other duties may be assigned.

Define item masters, bill of materials and routers by conducting white board exercises communicating with Engineering, Manufacturing, Purchasing and Applications on issues relating to JD Edwards. This includes supporting manufacturing processes by developing cross segment edits (application rules), formulas, conditions, targeting (item cost and suggested list prices), tables and routers inan accurateandtimelymanner.

Create Sales Configurators for entry of product into JD Edwards and the CAP (Configure Apply Price) Tool. This includes supporting Sales Force Automation (SFA)applications, anddeveloping cross-segment edits (application rules and suggested options based on the original salesperson entries), formulas, conditions, tables and targeting (list prices) inan accurateandtimelymanner. In manycasesthese will be developed for use at product announcement and before theappropriate Engineeringhas been completed.

Participate in the design, preparation, and release of interactive CAP documents. These will include electronic documents that merge configuration data with documents. This will normally be a cross-functional team drawn from Marketing, Applications, and outside suppliers.

Develop andmaintainPit Detail drawings in the CAP tool. These will define the required leveler pit dimensions and materialsrequiredfor the proper installation of levelers. This position works withDesignEngineering, Order Engineering, and Applications Department to define rules and bills of material.

CAP Wizards and Dependencies. Creates andmaintainssimplified Entry Wizards and Dependencies that communicateimportant informationto the salesperson. These dependencies will vary from requirements to informational notificationsrequiredto get a "clean" quote and conversion to an order.

Works with Applications, Marketing and Engineering to define Help text for individual segments for use in JD Edwards and the CAP tool. These explain individual product options in detail with a focus on making it clearest to the salesperson.

Works with Applications and Marketing to define English Definitions for Cross-Segment Edits.

Generate a comprehensive test plan for each configuration implementation. Oversee a cross-functional team to ensure that adequate testing is performed as a prerequisite to each implementation.

Perform post implementation audits to ensure theaccuratetransfer of information from the test to the live sales and manufacturing branch plants.

Review Engineering Change Notices toidentifytheir effect on JDE coding. Implementchangethrough the JD Edwards Manufacturing System. This will includeupdating ofitem masters, bills of materials, routings,tablesand costs.

Participates in manufacturing software implementations or upgrades. This will include defining andmaintainingthe manufacturing system setup and use. It may involvedefining ofnew processes required by new software. It will include definingappropriate dataconversions andverification ofdata accuracy.

Train personnel on MRP II, PhDconceptsand other related topics.

Document applicable policies and procedures.

Recommends changes, such as design modifications to engineering or process improvements to manufacturing, to achieve standardization and simplification.

Assist with development of product structures as they relate to selection of assembly forms to ensure efficient systems adaptability.

Responsible for continuous improvement of systems, setup,processesand procedures as they relate to assigned job duties and supporting areas.

PRINCIPLE ACCOUNTABILITIES
Implement the system or process improvement plans that achieve the stated goals andobjectivesof the plan(s).

Ensureaccurateitem master information, bill of materials,routersand multi-property edits.

EDUCATION and/or EXPERIENCE
ABachelor's degree in Industrial or Manufacturing Engineeringfrom afour yearcollege or university with at least two years related experiencerequired; or an equivalent combination of education and experience. Successfulcandidatewillpossessknowledge of contemporary manufacturing technologies. A working knowledge of CAD, familiarity with Rite-Hite products and/or knowledge of CA-KBM PhD is preferred but not required.

LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technicalproceduresor governmental regulations. Ability towritereports, businesscorrespondenceand procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and thegeneral public.

MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY
Abilityto define problems, collect data,establishfacts, and draw valid conclusions. Ability to interpret anextensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS
While performing the duties of this job, the employee is regularlyrequiredsitand talk or hear. The employeefrequentlyis required tostand, walk, reach with hands andarmsand use hands to finger. The employeeis occasionally required tostoop, kneel, crouch, or crawl. The employee may occasionallylift upto ten pounds. Specific vision abilities required by this job include close vision, colorvisionand ability to adjust focus.

WORK ENVIRONMENT
The noise level in the work environment is usually quiet.

What We Offer

At Rite-Hite, we take care of our people - because when you're supported, you can do your best work. Our benefits are designed to support your health, your future and your life outside of work:

• Health & Well-being: Comprehensive medical, dental, and vision coverage, plus life and disability insurance. A robust well-being program with an opportunity to receive an extra day off and more.

• Financial Security: A strong retirement savings program with 401(k), company match, and profit sharing.

• Time for You: Paid holidays, vacation time, and personal/sick days each year.

Join us and build a career where you're supported - at work and beyond.

Rite-Hite is proud to be an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under federal, state, or local law.In accordance with VEVRAA, we are committed to providing equal employment opportunities for protected veterans.We are also committed to maintaining a drug-free workplace for the safety of our employees and customers.

Manufacturing Supervisor

Location: Twin Lake, Michigan

Employment Type: Full-Time

Position Summary

The Manufacturing Supervisor provides technical leadership supporting manufacturing operations within a high-volume casting environment. This role leads engineering initiatives focused on improving throughput, reducing inventory, lowering operating expenses, and driving continuous improvement across manufacturing processes and automation systems.

This position combines technical expertise, leadership, and cross-functional collaboration to ensure consistent product quality aligned with customer specifications while advancing operational excellence.

Key Leadership Roles

Primary Responsibilities

• Provide technical leadership to Manufacturing Engineering and Automation teams
• Lead and mentor manufacturing and automation engineers
• Establish engineering priorities aligned with production, quality, and business objectives
• Collaborate with Quality, Maintenance, Production, and Supply Chain teams to resolve technical challenges
• Develop, implement, and optimize casting processes
• Drive root cause analysis and corrective actions for process deviations or yield issues
• Apply Lean Manufacturing and Six Sigma methodologies to reduce waste and improve throughput
• Lead initiatives focused on cellular manufacturing and labor cost reduction
• Identify and implement advanced technologies including automation, additive manufacturing, and AI-driven process monitoring
• Evaluate equipment upgrades and automation opportunities to improve process control and efficiency
• Document technical work, prepare technical reports, and maintain engineering standards

Basic Qualifications

• Bachelor’s Degree
• Minimum 5 years of experience in a manufacturing engineering role

Manufacturing Process Engineer - Aerospace

About United CNC Machining

United CNC Machining specializes in precision mission critical machined components for aerospace and defense industries. Our state-of-the-art, climate-controlled facility operates with cutting-edge equipment and a commitment to zero-defect quality standards. We are a high mix, low volume supplier with high credentials. Click here for your dream job!

Position Overview

We are seeking a highly skilled Manufacturing Process Engineer – Aerospace. This position is crucial for ensuring that products meet engineering principles, safety regulations, and customer expectations. Compensation range - $34/hr - $44/hr

Core Responsibilities

• Design and develop manufacturing processes, ensuring they meet technical specifications and industry standards.
• Implement manufacturing processes, including selection of appropriate materials and technology.
• Conduct research and apply new technologies to enhance manufacturing efficiency and product performance.
• Break down engineering processes into individual operations to manufacture components for aerospace and defense industries.
• Ability to analyze and utilize 2D and 3D prints and models.
• Document set-up sheets and maintain accuracy as changes or improvements ae made.
• Communicate with Engineering Supervisor while new projects are in process.

Qualifications

• Degree in relevant engineering and/or 5+ years of Process Engineering experience required.
• Machining experience a plus.
• Proficient in AutoCAD, Mastercam or other computer-aided drafting tools.
• Experience within the Aerospace industry.

Work Environment & Physical Requirements

• Work performed in a clean, organized, controlled manufacturing setting

Why Join Us?

• 100% paid medical, dental, vision and life insurance.
• Best compensation package for qualified individuals.
• CNC machining of prototype and limited production components for defense and aerospace.
• High tech climate-controlled environment.
• Paid holidays and vacation.
• Extreme fitness center.
• Tobacco and vape free facility.

United CNC Machining is an Equal Opportunity Employer

Now Hiring: Quality Assurance Manager

At Advance Turning & Manufacturing, Inc., we specialize in precision machining for the medical and aerospace industries, as well as other high-performance sectors. We are seeking a highly skilled and forward‑thinking Quality Manager with strong technical depth and leadership capability to elevate our quality systems across medical and aerospace manufacturing. This role is ideal for someone with a solid Quality Engineering foundation, proven success in compliance-driven environments, and the ability to drive continuous improvement at a systems level.

The successful candidate will bring hands-on experience implementing PFMEA, strengthening SPC utilization, and managing compliance with AS9100 and ISO 13485 certifications. The role offers significant influence, collaboration with senior leadership, and the opportunity to guide long-term quality strategy within a fast-paced CNC manufacturing environment.

Key Responsibilities:

• Lead, maintain, and improve the Quality Management System (QMS) in accordance with AS9100 and ISO 13485.
• Develop and refine PFMEA processes to ensure thorough risk assessment and mitigation.
• Drive SPC implementation and data‑driven process control throughout manufacturing.
• Oversee quality engineering, inspection, calibration, and compliance activities.
• Lead internal and external audits, ensuring timely and effective corrective actions.
• Partner with engineering and operations to resolve quality issues and deploy robust corrective solutions.
• Provide guidance and mentorship to quality team members to strengthen organizational capability.
• Ensure proper application, programming, and strategy for CMM inspection (PC‑DMIS, Calypso, or equivalent).
• Report key quality metrics, trends, and improvement initiatives to leadership.

Qualifications:

• Bachelor’s degree in engineering or related technical discipline (preferred).
• 5+ years in Quality Engineering, Quality Management, or related roles in aerospace, medical device, or precision manufacturing.
• Strong working knowledge of PFMEA, control plans, and risk-based methodologies.
• Hands-on experience with SPC, statistical methods, and manufacturing data analysis.
• Demonstrated understanding of AS9100 and/or ISO 13485 standards.
• CMM experience including programming or oversight of complex measurement routines.
• Proven ability to lead teams, collaborate cross‑functionally, and drive systemic improvements.
• Strong communication, problem-solving, and organizational skills.

What We Offer:

This role offers competitive compensation along with a comprehensive benefits package. You will work in a dynamic environment that provides opportunities for professional growth and increasing levels of responsibility. The position also serves as a key leadership role, allowing you to influence quality strategy within a highly regulated industry. In addition, you will gain valuable exposure to advanced manufacturing processes that support both the aerospace and medical sectors.

Benefits at Advance Turning:

·          Clean, bright, climate-controlled facilities

·          Non-contributing medical plan (with annual physical)

·          Competitive wages

·          Dental & vision coverage

·          Short- and long-term disability

·          Life insurance (up to $200,000)

·          Accident & critical illness insurance

·          401(k) with 50% match up to 8%

·          Health Savings Account (HSA)

·          Safety glasses reimbursement

·          Tuition reimbursement

·          Quarterly team meals

·          Employee Appreciation Program

Celebrate milestones with branded gifts, bonuses, and recognition starting after 6 months of employment.

Ready to join the team?

Apply today at pursue continuous improvement through innovation, technology, and people.

POSITION SUMMARY:

The Instrumentation and Calibration Engineer has the responsibility for ensuring the site’s production instruments are operating at optimal levels and properly maintained to data collection in an FDA regulated environment. The position will be primarily responsible for ensuring all instruments are maintained in a calibrated state. Additionally, the Engineer will support general troubleshooting of production equipment/utilities, and asset management.

To perform this position successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required:

• Shall adhere to all applicable regulatory requirements, including FDA, EPA, OSHA, and related safety, health and environmental procedures, policies and practices.
• Consistent support and practice of all Piramal Pharma Solutions mission, vision, and values.
• Identify and protect the original technical information as part of the company property.

KEY RESPONSIBILITIES.

• Support the Preventive Maintenance (PM) program through the creation of new PM tasks, evaluation of existing PMs for technical relevance to current asset problems.
• Help create Standard Operating Procedures (SOPs) for equipment operation, engineering analyses, PM and calibration tasks, that adhere to FDA and cGMP requirements.
• Support the management of the calibrations on production instruments, such as temperature sensors (RTDs/resistance thermometers), pressure sensors (electronic manometers, gauges), and other transmitters.
• Support root cause investigations to a detailed level required for an FDA regulated/cGMP environment, and translate these root causes to effective CAPAs that mitigate equipment risk.
• Assesses and monitors equipment for reliability of operation implementing necessary improvements
• Maintains system classification of incoming equipment with the system owner. Duties may include assembly of supplier operating and maintenance manuals, installation and operational qualification.
• Translate data from Root Cause Centered Maintenance (RCCM) data to support Autonomous Maintenance program. Train Operations personnel in Autonomous Maintenance.
• Maintain calibration records, and qualification of calibration contractor.
• Manages risk to achieve organization's strategic objectives in areas of environmental health and safety, asset capability, quality, and production.
• Conducts risk analyses routinely when production equipment is functioning outside of expected parameters
• Develops Total Cost of Ownership, Mean Time to Failure, Life Cycle Cost, Mean Time to Repair, specific to critical equipment in the production areas.
• Runs process improvement projects from design thru implementation. Apply Root Cause Centered Maintenance (RCCM) to develop improved preventive maintenance tasks.
• Executes changes through to completion, from initiation of change controls to revising SWIs, coordinating work with Maintenance/Engineering, etc., to close out of CCs
• Collaborates with other departments to ensure that reliability is integrated into all aspects of the organization
• Participates in and execute qualification and validation of equipment and processes

EDUCATION/EXPERIENCE.

• Bachelor’s degree in an engineering discipline and 3 years of experience in a related or similar field, or
• Associate’s degree in an engineering or scientific discipline and at least 5 years of experience.

JOB COMPETENCIES.

• Analytical thinking: the ability to think critically and logically, as well as the ability to work with large sets of data and make sense of them.
• Technical aptitude: a strong understanding of the systems, equipment, and processes at hand. This includes knowledge of the engineering principles and specific systems used at an organization.
• Mechanical aptitude: an understanding of how mechanical components fit together and support the function of equipment. Demonstrated curiosity for how production equipment functions.
• Problem-solving: the ability to think creatively and come up with innovative solutions to complex problems. Specific experience applying Root Cause Analysis and Root Cause Investigation concepts to determine root causes and create effective corrective actions.
• Communication: the ability to explain technical concepts in a clear and understandable manner, as well as the ability to collaborate effectively with others. The ability to generate highly technical equipment maintenance into work instructions for Maintenance Technicians.
• Time management: the ability to manage multiple projects and tasks simultaneously and effectively including planning, scheduling, and organizing. Preferred experience in the Agile Project Management System.
• A continuous improvement mindset: identifying and implementing ways to continuously improve reliability.
• An understanding of lean manufacturing principles, and applying Six Sigma concepts to chemical manufacturing.
• Safety-conscious: the ability to identify potential hazards and take the necessary steps to mitigate them.
• Knowledge of CMMS system and functions
• Knowledge of the regulations and their application to instruments that gather GMP data in a production environment.

About the Role

We are looking for a Power Electrical Engineer to join our engineering team. This individual will help design, size and specify power distribution from MV though LV. This person will be involved in concept investigation, system verification, design through successful installation.

Basic Qualifications & Responsibilities

• Proven expertise in the design, testing, troubleshooting, and maintenance of low- and medium-voltage AC distribution systems, including power distribution, control systems, and wiring.
• Collaborate with sales, engineering, and other technical teams to ensure cohesive project execution.
• Experience in the development of electrical construction packages comprised of:
• Single Line Diagrams
• Three Line Diagrams
• Schematics/Elementary Diagrams
• Interconnection Diagrams
• Written narratives
• Proficient in interpreting and applying electrical schematics, mechanical drawings, and technical diagrams to support system design and troubleshooting.
• Understanding of 3 Phase Power Systems, Power Factor correction, Harmonics mitigation.
• Interpret/Draft AC Distribution schematic drawings.
• Ability to load balance and perform load calculations.
• Knowledgeable of the requirements detailed in the National Electrical Code (NEC) and National Electrical Safety Code (NESC).
• Experience with power system modeling tools - ETAP preferred.
• Adept at the use of Microsoft Office Suite and AutoCAD. Knowing Revit is a plus.
• Communicate effectively with both the business and technical teams.
• Strong analytical and problem-solving skills to tackle complex engineering challenges.
• Familiar with Automotive standards and specification.
• Technical Support: Provide technical support and troubleshooting for Power Platform solutions, identifying, and resolving issues promptly.
• Documentation: Create and maintain detailed technical documentation for solutions, workflows, and processes, ensuring knowledge transfer and continuity.
• Familiarity with various cable types (e.g., multi-conductor, fiber optic, coaxial, twisted pair, power) and their specifications for system integration and performance.

Required Qualifications

• Bachelor’s degree in Electrical Engineering from an accredited institution and minimum of 7 years in power distribution applications.
• Legally authorized to work in the United States without company sponsorship now or in the future.
• Must possess and maintain a valid and unrestricted driver’s license and US Passport with no travel restrictions.

Required Skills

• Proven expertise in the design, testing, troubleshooting, and maintenance of low- and medium-voltage AC distribution systems.
• Collaborate with sales, engineering, and other technical teams.
• Proficient in interpreting and applying electrical schematics.
• Understanding of 3 Phase Power Systems.
• Ability to load balance and perform load calculations.
• Knowledge of NEC and NESC requirements.
• Experience with ETAP.
• Adept at Microsoft Office Suite and AutoCAD.
• Strong analytical and problem-solving skills.

Preferred Skills

• State of Michigan PE License.
• Master’s degree in EEGM automotive standards.

Akkodis is seeking a Technical Author for a position with a client located in Allen Park, MI.

We are seeking an experienced Automotive Technical Author to support documentation for Ford Motor Company vehicle service and repair procedures. This role is ideal for dealership technicians or automotive professionals who want to transition into technical documentation while applying their diagnostic and mechanical expertise.

Pay Range: $32/hr. - $36/hr. (The pay may be negotiable based on experience, education, geographic location, and other factors.)

Work Schedule

• Hybrid: 2 days onsite / 3 days remote
• Core hours: 9 AM – 3 PM (flexible)
• Additional onsite days during initial training

Technical Author – Automotive

Key Responsibilities

• Create and maintain service, repair, and diagnostic documentation for vehicle systems
• Translate complex engineering data, wiring diagrams, and technical specifications into clear instructions for technicians
• Collaborate with engineering and product teams to ensure technical accuracy
• Support labor time studies and documentation for vehicle service procedures
• Maintain documentation using content management and authoring tools

Required Qualifications

• 2+ years of dealership diagnostic repair experience (bumper-to-bumper)
• Hands-on experience with collision repair, spot welding, panel installation, body measurements, and paint
• Strong automotive diagnostic and mechanical skills
• Ability to interpret service manuals, wiring diagrams, and repair procedures
• Strong written communication and documentation skills
• Proficiency with Microsoft Office (Word, Excel) and Adobe Acrobat

Preferred

• Prior technical authoring or documentation experience
• Experience with XML authoring tools such as Oxygen XML Editor, Arbortext Editor, or XMetaL
• National Institute for Automotive Service Excellence (ASE) certifications
• Experience working in a Ford dealership environment

If you are interested in this Technical Author job in Allen Park, MI then please click APPLY NOW. For other opportunities available at Akkodis go to you have questions about the position, please contact Nandakini Sajwanat

Equal Opportunity Employer/Veterans/Disabled

Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

· The California Fair Chance Act

· Los Angeles City Fair Chance Ordinance

· Los Angeles County Fair Chance Ordinance for Employers

· San Francisco Fair Chance Ordinance

Account Manager – GM OEM | Tier 1 Automotive Supplier

Farmington Hills, MI

We’re partnering with a growing Tier 1 automotive supplier looking to add an Account Manager to support their General Motors OEM business.

This role will focus on managing the GM relationship, supporting current programs, and identifying opportunities for future growth.

Responsibilities

• Manage commercial activity for GM programs

• Support RFQs, pricing strategy, and contract negotiations

• Build relationships with GM purchasing, engineering, and program teams

• Work cross-functionally with engineering, operations, and leadership

• Identify and pursue new business opportunities within GM

Qualifications

• Experience working for a Tier 1 automotive supplier

• Background supporting GM business

• Account management, sales, or commercial experience

• Strong relationship-building and communication skills

Location: Farmington Hills, MI

Compensation: Competitive base salary + bonus

If you’re interested in learning more, please send your resume to

• Leading the Naval network warfare missions in developing tactics and procedures to realize tactical, strategic and business advantages afloat and ashore
• Driving interoperability with joint, allied and coalition partners
• Building professional excellence through education, training and certification and milestone qualifications
• Optimizing organizational effectiveness through cutting-edge technologies, knowledge management techniques and a culture of innovation
• Helping to develop and deploy information systems, command and control and space systems
• Serving as a key part of the Information Dominance Corps in its mission to gain a deep understanding of the inner workings of adversaries
• Overseeing the work of Information Systems Technicians - Enlisted Sailors (no degree required) who serve as specialists in information technology

• Serving as part of Battle Group staffs on ships at sea
• Working in C4I/Space/Surveillance on shore tours
• Serving on major Navy and joint staffs
• Serving in command of key communication and surveillance facilities around the globe

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

VP, Operations– Leading Aerospace & Defense Components Manufacturing – Private Equity

Our client is a leading private equity backed manufacturer of highly engineered components for defense and aerospace primarily serving large aerospace OEM’s and blue-chip defense contractors. The company is highly regarded for its innovation and engineering capabilities and is currently experiencing significant growth through organic means, with acquisitions playing a key role for future growth. The company is seeking to recruit a dynamic and hands-on VP, Operations who will wear multiple hats as they drive operational improvements across the organization and scale production and engineering capabilities for growth.

We are seeking a proven operations leader with demonstrated success driving operational excellence through the introduction of best practices and process within a highly entrepreneurial environment. This individual will have previous aerospace, automotive or medical device manufacturing experience working with OEM’s and prime contractors. Background experience in Lean process improvement, Continuous Improvement and other systems such as TPS or Six Sigma is a significant asset, as is highly engineered precision machining manufacturing. This position requires a hands-on executive who spends time on the shop floor and has the ability to lead transformation with a strong focus on performance improvement, quality and data driven decision-making.

An attractive compensation package is on offer that will include bonus opportunities and equity participation.