Engineering Structures Scimago Jobs in Pacifica, CA

About Muro AI

Muro AI is transforming how the $2T construction industry plans and builds. Founded by Cornell alumni, ex-founders, and former McKinsey operators, we’re building AI agents that automate the most complex, manual, and costly phase of construction: preconstruction.

We move fast, build with conviction, and obsess over delivering real impact to the people who build our world. If you want to shape how the next century of construction gets built, this is where it starts.

About The Opportunity

As our Founding Account Executive, you’ll drive Muro’s growth from founder-led sales to a scalable GTM engine. You’ll own deals end-to-end — from discovery to close — working with the founders to define our ICP, refine messaging, and make “Muro it” a phrase known across the construction world. 

Location: San Francisco (preferred) open to Remote; approximately 30% travel

Why it matters:

• Shape a category. No one owns “pre-con AI” yet - we’re charting that map
• Bridge two worlds. We’re redefining how construction meets AI — you’ll bridge human expertise with AI automation to transform how the industry works
• Drive impact. Every deal you close helps bring automation to an industry that still runs on spreadsheets

What You’ll Do

• Own the full sales cycle - from prospecting and pipeline generation to negotiation, close, and onboarding - across mid-market and enterprise clients (typically $50K+ ACV)
• Build and run multi-threaded sales campaigns engaging both operational leaders (Preconstruction Directors, Estimators) and C-suite executives
• Conduct deep discovery to understand client workflows, pain points, and ROI opportunities, translating them into tailored solutions and measurable outcomes
• Deliver compelling demos and proposals, connecting Muro’s AI capabilities to tangible preconstruction efficiency and cost savings
• Collaborate closely with founders to refine ICP, messaging, and pricing, and to build scalable sales playbooks and processes
• Represent Muro at key industry events and conferences to drive awareness, pipeline growth, and category leadership in “Pre-Con AI.”
• Partner cross-functionally with Product and Engineering to relay customer insights, shape new use cases, and influence the product roadmap

Basic Qualifications

• 2+ years of full-cycle closing experience in SaaS or fast-growing startups
• Proven track record of exceeding quota, closing $50K–$100K+ ARR deals
• Skilled in solution selling - you focus on outcomes and ROI, not features, and can tailor value to each customer’s workflow and priorities
• Strong communicator and storyteller — able to make complex AI or workflow products simple and compelling
• Highly organized and detail-oriented, with disciplined CRM hygiene (HubSpot experience a plus)
• Coachable, curious, and driven to grow in a fast-paced, early-stage environment
• Thrives in high-ownership, ambiguous settings and knows how to create structure where none exists

Preferred Qualifications

• Experience selling SaaS or AI solutions; selling to General Contractors or within the construction industry is a plus
• Proven ability to manage complex, high-value sales cycles (>$100K contracts)
• Strong understanding of construction workflows and buyer dynamics in preconstruction or operations
• Experience engaging with senior decision-makers and representing the company at industry events, trade shows, or conferences
• Familiarity with modern outbound tools such as Lemlist, Clay, and LinkedIn Sales Navigator

What You'll Get

• Ownership & Impact: Play a pivotal role in shaping how the construction industry adopts AI — your work will directly influence our growth and success.
• Speed & Urgency: We move fast and operate with high ownership — we raise the bar for ourselves and each other every day.
• Competitive compensation with a top-of-market base, uncapped commission, and benefits
• Growth Environment: Continuous learning, mentorship, and clear paths to advance as we scale our GTM team

Manufacturing Engineer

Bay Area, CA (On-site: Richmond, CA)

Full-Time

Confidential | Drug Testing Industry (Stealth Mode)

Peoplework LLC is looking for a highly motivated Manufacturing Engineer to join our client’s team! The primary role will be to lead the daily operations and logistics to manufacture and distribute products for customers. This includes manufacturing production, movement of materials, and oversight of inbound and outbound inventory. The Manufacturing Engineer will partner with Quality and Engineering teams to manage multisite internal manufacturing lines, including line bring up, as well as line transfer to external contract manufacturers as production demands increase. This role is ideal for someone who has a technical background, can establish, and communicate a vision and enjoys being “hands on”. This position reports to the SVP of Operations.

What You’ll Be Responsible For

·       Own setup and qualification of internal manufacturing launch line.

·       Lead internal manufacturing including daily build schedules and operator oversight to achieve production output targets.

·       Manage daily and long-term customer order fulfillment, multi-site production planning, and inventory oversight.

·       Define production cycle times, output requirements, and to ensure timely and cost-effective delivery of all inbound raw materials utilized in the manufacturing process and all customer products.

·       Leverages lean skillset to manage manufacturing efficiency and quality through increased resource productivity, decreased process cycle times, and scrap reduction.

·       Responsible for product quality and exceeding customer quality and delivery expectations.

·       Assist troubleshooting activities related to product assembly, testing and service issues, including root cause analysis, to achieve a timely resolution.

·       Collaborate with key stakeholders to ensure on time and in budget delivery of production milestones and quality support activities and investigations.

·       Writes and reviews relevant manufacturing documentation such as Product specifications (SPCs), Manufacturing instructions (MPIs), Device History Records (DHRs), and other GMP documents.

·       Deliver status reports, metrics and updates that provide visibility on production goals and outputs.

·       Leads the team in staff training, maintenance and upkeep of manufacturing procedures and policies.

·       Assist in hiring process and creation of relevant job descriptions.

·       Provides guidance in make/buy decisions based on quality, schedule, and cost.

Experience

·       Bachelor’s degree in engineering field, or a related discipline.

·       Alternative: Associate degree, trade school, military technical training, or equivalent experience

·       3+ years relevant experience in manufacturing operations, including direct experience a regulated environment: Medical Device, Pharmaceutical, etc.

·       Experience with manufacturing line start up and process qualifications.

·       1+ years of supervisory experience leading diverse teams in manufacturing operations.

·       Demonstrated excellence achieving process improvements and associated operating efficiencies.

·       Knowledge of GMP manufacturing principles and documentation best practices.

·       Experience working within a structured quality management system.

Work Habits

·       Provides open environment and promotes collaborative teamwork.

·       Works independently and as part of an interdisciplinary team to achieve project goals and timelines as required.

·       Strong verbal, written communication skills.

·       Communicates efficiently with multiple people both internally and externally and prepare and present information to groups.

·       Skillset to lead and motivate others in both matrixed and direct-line management environments.

Why This Role

• Join a confidential, early-stage drug testing company with meaningful impact on assay development and lab operations
• Opportunity to work closely with scientists, engineers, and quality teams
• Competitive compensation and benefits: Salary range: $135,000-$145,000/year.

Due to the stealth nature of the organization, additional details will be shared during the interview process.

Interested?

Apply directly or message me to learn more.

Title: Technical Account Manager

Location: Milpitas, Ca

OVERVIEW: LITEON designs and manufactures power supplies, keyboards, ODDs, racks, enclosures, and liquid cooling for a variety of customers in the server, storage, networking, and consumer spaces. With headquarters in Taipei, Taiwan, and branch offices in the United States, LITEON is looking for a creative, best-in-class professional who will thrive in a fast-paced, highly technical environment. The successful candidate will have exceptional communication, leadership, and teamwork skills and will be unafraid of stretching their talents in a dynamic organization where respect and knowledge are far more important than reporting structure. Collaboration with colleagues at all levels will be key to this person’s success at LITEON.

ABOUT THE ROLE:

The Technical Account Manager (TAM) is hands-on and responsible for driving LITEON relationships at the specified strategic account. The primary focus will be on power supplies, liquid cooling, and mechanical enclosures/racks. This person owns the relationship with engineering at the strategic account on behalf of LITEON.

JOB DUTIES AND RESPONSIBILITIES:

• Drive sales growth and consistently exceed revenue budgets.
• Conduct quarterly business reviews with Account management, reviewing direction and road mapping.
• Track monthly reporting attainment to KPI’s once established.
• Identify and develop opportunities for all LITEON business units.
• Analyze customer needs and collaborate with management to develop effective strategies.
• Build strong customer relationships and a comprehensive understanding to influence hierarchy, product, and business roadmaps, vendor selection processes, decision-making criteria, and competitive awareness.
• Foster a customer-centric mindset, focusing on long-term partnerships.

QUALIFICATIONS:

• Bachelor’s Degree in Business Administration (or equivalent experience).
• At least 5 years of related or equivalent experience in the AI Server industry in a Sales Account Manager role.
• Strong time-management and organization skills for coordinating multiple initiatives, priorities, and implementations of new technology and products into very complex projects.
• Ability to identify issues, obtain relevant information, analyze and compare data from different sources, and identify alternative solutions.
• Interprets and seeks information, uses independent reasoning to diagnose the root cause of situations or issues, identifies and tests solutions, and thinks beyond what is typical or customary.
• Strong written and oral communication skills in English with the ability to effectively collaborate with management and engineering.
• Ability to manage resources, monitor activities, and assess risks and quality issues associated with the program/project.
• Language Skill: Bilingual in English/Mandarin is a plus, aligned with business needs.
• Flexibility to work some evening hours as needed.
• Proficient in Microsoft Office, including Word, Excel, Outlook, Teams, PowerPoint, and/or other applications to streamline communication and complete tasks.

Benefits

As a full-time employee, you'll have access to LITEON’s comprehensive benefits package, which includes medical, dental, vision, 401(k), and paid time off in compliance with US labor requirements.

Additional Details

LITEON is committed to equal opportunities for all qualified individuals, and we welcome a diverse range of applicants.

Please note that the responsibilities and duties of the position may change with or without notice, and we are committed to providing reasonable accommodation for individuals with disabilities to perform their essential functions.

Join a dynamic leader in the transportation, logistics, supply chain, and storage industry, recognized for developing and supporting mission-critical technology solutions that drive innovation in autonomous delivery and operational excellence. As a PLM Systems Analyst, you will play a key role in supporting and optimizing the suite of engineering applications that power the design, manufacture, and maintenance of advanced drone delivery systems. This opportunity is ideal for a systems analyst passionate about engineering tools, process improvement, and collaboration in a fast-paced environment with real-world impact.

• 
  
• Provide day-to-day administration and support for Siemens PLM tools, including Teamcenter, NX, and StarCCM+.
  
• Own and resolve L1 and L2 PLM support tickets, focusing on user access, troubleshooting, and minimizing recurring issues.
  
• Partner with Siemens and internal IT to escalate and resolve complex issues efficiently.
  
• Manage system configuration, environment setup, and routine maintenance to ensure system stability and reliability.
  
• Document processes, troubleshooting steps, and system updates to enable scalable workflows.
  
• Support system upgrades, patches, release cycles, and undertake testing, validation, and user coordination to minimize disruption.
  
• Collaborate with engineers to understand usage, identify pain points, and implement workflow improvements.
  
• Support and troubleshoot integrations between Teamcenter and other engineering or enterprise systems.
  
• Assist with onboarding and training of new users, ensuring effective system access and tool utilization.
  
  

• 
  
• 3–5+ years of experience supporting Siemens PLM or related engineering tools (e.g., Teamcenter, NX, StarCCM+).
  
• In-depth understanding of PLM concepts, CAD/CAE workflows, and engineering toolchains.
  
• Proven experience providing L1/L2 technical support and diagnosing system, user, and integration issues.
  
• Demonstrated system administration expertise including access control, configuration, upgrades, and cloud-based environment management.
  
• Experience coordinating with vendors (preferably Siemens) for technical issue resolution.
  
• Excellent problem-solving and troubleshooting skills across multiple systems and functions.
  
• Strong communication skills to explain technical concepts to both engineers and non-technical stakeholders.
  
• Ability to collaborate effectively with Engineering, IT, and Operations teams.
  
  

• 
  
• Experience supporting integrations with enterprise systems such as ERP, MES, or API-based solutions.
  
• Familiarity with change management processes (ECR, ECO, ECN) and engineering data management practices.
  
• Background in user onboarding, training, and developing technical documentation.
  
• Prior exposure to SOP development and workflow automation in engineering environments.
  
• Track record of driving process improvements in PLM or related system landscapes.

General Summary

As a member of the Manufacturing Engineering group at Penumbra, you will be called upon to solve complex problems and implement innovative solutions. You will provide manufacturing technology and robust solutions aimed at commercializing new products and continuously improving production processes. Working cross-functionally with engineering groups across the company, as well as with Production, Quality Control and Quality Assurance, you will resolve problems encountered on the production floor and throughout the business, and will apply your engineering knowledge and creativity to implement adaptations and modifications to the production line and to quality systems.

What You'll Work On

•Solve complex problems and implement innovative solutions

•Execute detailed root cause analysis and recommend vetted solutions

•Communicate and explain problems and solutions cross-functionally and inter-departmentally

•Collaborate closely with suppliers, ensure timely communication of updates, and respectfully request any necessary changes.

•Manage NCRs, deviations, engineering change orders, and supplier documentation while utilizing a Quality Management System to ensure continuous improvement and compliance.

•Engage in the troubleshooting of electromechanical products by employing failure analysis and problem-solving techniques, while also recommending and implementing effective solutions.

•Lead the implementation of projects at the supplier level, managing communications related to test plans, monitoring project timelines, and ensuring all milestones are met efficiently.

•Approach problems from a detail-oriented perspective

•Suggest independent recommendations for project approach, scope, and tactics

•Support production needs

•Create and maintain product and process documentation

•Monitor process and equipment performance and identify and implement process improvement activities to increase/optimize yield

•Design fixtures, acquire off-the-shelf tooling and equipment, and implement new fixturing on the production line

•Test processes, equipment, raw materials, and product

•Perform process validations

•Author protocols to execute tests and write reports and make conclusions and/or recommendations based on test results

•Plan, schedule, conduct, and coordinate detailed phases of engineering work as part of a project or as a total project

•Develop specifications of a product, process, or piece of equipment

•Develop, characterize, and optimize processes using statistical techniques and engineering knowledge and experience

•Coordinate with the appropriate suppliers and other external resources needed in developing and implementing process improvement plans

•Participate in project planning and scheduling

•Train assemblers, quality control and technicians, as necessary, on processes, equipment, and documentation

•Comply with quality system regulations, standards and procedures

* Indicates an essential function of the role

Location and Pay

•Alameda, CA

•$95,000 to $127,000

Position Qualifications

Minimum education and experience:

•Bachelor’s degree in Mechanical, Biomedical, Electrical, Chemical, Materials, or Industrial Engineering or related degree with 2+ years relevant engineering experience, or an equivalent combination of education and experience

Additional qualifications:

•Engineering experience in a manufacturing environment recommended, medical device industry preferred

•Experience in troubleshooting and working with electromechanical devices

•Excellent written, verbal, and interpersonal communication skills required

•Knowledge of FDA regulations, Lean/Flow Manufacturing, and/or materials and manufacturing processes desired

•Proficiency in Word, Excel, PowerPoint, Access, and other computer applications required

•Supplier audits, risk management (FMEA, DFMEA, PFMEA), lean manufacturing/six sigma, equipment qualification

Working Conditions

•General office, laboratory, and clean room environments.

•Willingness and ability to work on site.

•Business travel from 0% - 10%

•Potential exposure to blood-borne pathogens.

•Requires some lifting and moving of up to 25 pounds.

•Must be able to move between buildings and floors.

•Must be able to remain stationary and use a computer or other standard office equipment, such as a printer or copy machine, for an extensive period of time each day.

•Must be able to read, prepare emails, and produce documents and spreadsheets.

•Must be able to move within the office and access file cabinets or supplies, as needed.

Technical Lead / Platform Engineer

GenAI Healthcare SaaS Platform

Palo Alto, CA (Hybrid – 3 days onsite)

About the Role

We’re building a next-generation generative AI platform purpose-built for healthcare — and we’re looking for a hands-on Technical Lead to help architect and scale it from the ground up.

This is not a “manage from a distance” role. You’ll be deeply involved in system design, writing production code, guiding engineering direction, and making foundational technical decisions that shape the future of the platform. You’ll work closely with leadership and product to turn complex healthcare AI requirements into scalable, reliable infrastructure.

If you’ve led engineering efforts for production-grade AI systems and enjoy building high-performance teams and platforms, we’d love to talk.

What You’ll Own

• Architect and evolve the core infrastructure for a scalable AI-powered SaaS platform
• Lead development of backend services and ensure clean integration across systems
• Write high-quality, maintainable code with long-term scalability in mind
• Establish engineering best practices across architecture, CI/CD, monitoring, and DevOps
• Guide and mentor engineers while maintaining a strong individual contributor presence
• Define infrastructure automation strategies (IaC, provisioning, deployment workflows)
• Drive performance, reliability, and observability standards
• Partner with product and leadership to translate vision into executable technical milestones

What We’re Looking For

Core Experience

• 8+ years building and shipping production software
• Prior experience leading engineering initiatives or managing technical direction
• Proven track record scaling a generative AI system or AI-enabled platform in production
• Strong backend engineering background in Python
• Additional proficiency in TypeScript or Java
• Experience with a modern compiled language such as Go or Rust
• Deep knowledge of microservices architecture and RESTful API design
• Hands-on expertise with one major cloud provider (AWS, GCP, or Azure)
• Strong experience with Infrastructure as Code (Terraform preferred)
• Advanced DevOps knowledge: CI/CD, automated deployments, monitoring, alerting
• Experience containerizing and orchestrating services with Docker and Kubernetes

Leadership & Execution

• Comfortable setting technical direction while staying hands-on
• Strong communicator who can explain complex systems clearly
• Experience mentoring engineers and elevating engineering standards
• Ability to operate in a fast-moving, startup environment

Nice to Have

• Experience building or deploying ML/AI systems (TensorFlow, PyTorch, etc.)
• Strong GCP background (bonus if you’ve worked across AWS/Azure as well)
• Familiarity with frontend frameworks like React, Angular, or Vue
• Experience working in healthcare, health tech, or regulated industries

Work Environment

This role is based in Palo Alto with a hybrid schedule (3 days per week onsite). We provide daily meals and foster a collaborative, high-performance engineering culture.

Compensation & Benefits

• Base salary range: $220,000 – $280,000, depending on experience and location
• Meaningful equity package
• Medical, dental, and vision coverage
• Flexible hours
• Hybrid work environment
• Opportunity to help shape the future of AI in healthcare

If you're excited about building a production-grade AI platform that directly impacts patient outcomes — and want to help define the technical foundation of a category-defining company — let’s talk.

Staff Design Quality Engineer – Class III Implantable Medical Device

San Francisco Bay Area | Full-Time | Hybrid

A fast-growing medical device company developing next generation implantable technology is expanding its engineering team and hiring a Staff Design Quality Engineer to support the development of a highly innovative Class III medical device platform.

This is a highly technical, hands-on role embedded directly with R&D, focused on ensuring quality is built into product development from early feasibility through clinical and commercial stages.

You will play a key role in helping bring a breakthrough therapy to market while working alongside experienced engineers and cross-functional leaders in a collaborative development environment.

Responsibilities

• Partner closely with R&D and systems engineering teams to integrate design quality into product development
• Lead and support design control activities throughout the product lifecycle
• Drive risk management efforts (ISO 14971) including hazard analysis, FMEAs, and risk mitigation strategies
• Support verification and validation planning and execution
• Ensure compliance with FDA design control requirements and global quality standards
• Participate in cross-functional design reviews and technical decision making
• Help translate regulatory and quality requirements into practical engineering processes

Qualifications

• BS or MS in Engineering (Biomedical, Mechanical, Electrical, or related)
• 7+ years of experience in medical device product development or design quality
• Strong experience with design controls and risk management
• Experience supporting Class II or Class III medical devices
• Ability to collaborate closely with R&D in early-stage product development
• Experience supporting IDE, PMA, or complex regulatory pathways is highly valued

What Makes This Opportunity Unique

• Work on cutting-edge implantable technology
• Join a highly technical engineering-driven team
• Be involved early in the development lifecycle
• Significant opportunity for technical ownership and influence
• Competitive compensation, bonus, and equity package

If you are interested in learning more, feel free to reach out directly.

Senior Staff Full Stack Engineer – Platform

Location: San Francisco (Hybrid)

Employment Type: Full-time, Permanent

About the Company

Our client is a well-funded, high-growth technology company building AI-powered software used by large enterprise customers in complex, regulated environments. The organisation is focused on improving operational efficiency and decision-making through intelligent automation and advanced data systems.

Backed by leading investors, the company is scaling rapidly and investing heavily in its engineering platform to support continued product expansion and customer growth.

Role Overview

We are seeking an experienced Senior/Staff Full Stack Engineer to join a growing platform engineering team. This role will focus on building and scaling the core systems, internal tooling, and shared services that underpin the company’s product suite.

You will play a key role in architectural decisions, system design, and engineering best practices while working across backend and frontend technologies in a distributed, high-performing team.

Key Responsibilities

• Design, build, and maintain scalable full stack applications and shared platform services
• Develop robust APIs and backend systems using modern frameworks
• Contribute to frontend development using contemporary web technologies
• Partner with product, design, and cross-functional stakeholders to deliver high-impact features
• Improve system performance, reliability, and scalability
• Uphold strong engineering standards across testing, security, and maintainability
• Contribute to architectural discussions and mentor other engineers where appropriate

Requirements

• 8+ years of experience in full stack software engineering
• Strong proficiency in JavaScript/TypeScript and Python (or comparable modern languages)
• Experience designing and building RESTful APIs and distributed systems
• Familiarity with relational and NoSQL databases
• Experience with automated testing (unit and integration)
• Strong understanding of modern software development practices and version control (Git)

Nice to Have:

• Experience working in regulated or enterprise environments
• Exposure to cloud-native architectures and scalable infrastructure
• Background in performance optimisation or systems reliability

This is an opportunity to join a mission-driven organisation at an exciting stage of growth, with meaningful ownership and technical influence from day one.

For more information or to apply, please contact Sam Shinner at Discover International.

Lead Engineer (Foundry)

We’re seeking a Lead Engineer / Senior Lead Engineer to join a rapidly growing, vertically integrated real estate investment and operating platform. This role sits at the intersection of technology, operations, and investment strategy and is designed for an engineer who wants to build software that directly impacts business performance.

Unlike traditional engineering roles, this position is deeply embedded with Asset Management, Property Operations, and Construction teams. You’ll work closely with executive leadership and business users to design, deploy, and iterate on software solutions that improve NOI, reduce costs, and enhance portfolio performance. This is a hands-on builder role. You will write code, automate workflows, integrate data pipelines, and build dashboards—working shoulder‑to‑shoulder with the teams using the tools you create.

Salary & Benefits

• Base Salary Pay Range: $120k-$145k per year
• Discretionary bonus BOP after 1 year of service
• Paid Time Off (starting at 10 days + 2 floating holidays / 96 Hours, accrued)
• A flexible health plan offering medical, dental, and vision benefits
• 401(k) Savings Plan

Responsibilities

Embed With Business Teams

• Work day‑to‑day with property managers, asset managers, and finance teams
• Identify operational inefficiencies, data gaps, and workflow breakdowns

Rapid Prototyping and Deployment

• Design and build scripts, dashboards, automations, and integrations
• Deliver practical tools that solve problems in real time

Systems Integration

• Connect platforms such as property management systems, ticketing tools, analytics platforms, spreadsheets, and custom databases into unified workflows

Operational Analytics

• Build models for rent roll forecasting, delinquency tracking, CapEx planning, and maintenance cost monitoring

AI and Automation

• Apply AI to summarize tenant communications, flag high‑risk accounts, and optimize leasing and maintenance workflows

Outcome Measurement

• Track and report the business impact of solutions, including response times, collections, and cost efficiency

Cross‑Functional Leadership

• Serve as a translator between investment professionals and technical stakeholders
• Ensure solutions are scalable, practical, and aligned with business priorities

Minimum Qualifications

• Bachelor’s degree in Computer Science, Engineering, Data Engineering, or a related field
• 3+ years of experience in software engineering, data engineering, or applied analytics
• 1+ year of hands‑on experience with Palantir Foundry or Gotham
• Strong SQL and Python skills; experience with APIs and ETL pipelines (PySpark a plus)
• Excellent analytical and problem‑solving skills
• Strong communication skills with the ability to explain technical concepts in business terms

Key Skills and Competencies

• Clear, articulate communicator with strong documentation habits
• Highly analytical with strong qualitative judgment
• Able to prioritize effectively and meet deadlines
• High standards of excellence and ethics
• Comfortable identifying issues and driving solutions independently
• Strong critical thinking and decision‑making abilities
• Naturally inquisitive; asks the right questions and challenges assumptions
• Goal‑oriented, diligent, and execution‑focused

Equal Opportunity Employer/Veterans/Disabled

To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

• The California Fair Chance Act

• Los Angeles City Fair Chance Ordinance

• Los Angeles County Fair Chance Ordinance for Employers

• San Francisco Fair Chance Ordinance

We’re seeking a Building Inspector (I, II, or III) to join our growing team at Urban37, Inc. in the Marin County area. In this full-time role, you’ll perform building inspections, conduct plan reviews as assigned, and work directly with contractors, applicants, and City staff to ensure projects are safe, compliant, and moving forward efficiently.

Success in this position means delivering thorough, timely, and solution-focused service while representing Urban37 with professionalism, integrity, and care.

What You'll Do

• Conduct building inspections for residential, commercial, and mixed-use projects at various stages of construction.
• Perform plan reviews appropriate to your certification level, including structural, accessibility, and building code compliance.
• Prepare clear, detailed inspection reports and maintain accurate records in accordance with City, State, and departmental requirements.
• Communicate effectively with contractors, design professionals, property owners, and applicants to identify deficiencies and guide corrective actions.
• Interpret and enforce applicable building codes with accuracy, consistency, and sound judgment.
• Coordinate closely with Planning, Fire, Engineering, and other City departments to support efficient permitting and inspection workflows.
• Support more advanced inspection, enforcement, and mentoring responsibilities consistent with a Building Inspector II or III role (as applicable).

Qualifications

• Experience performing building inspections in a municipal or consulting environment (required).
• ICC Residential Building Inspector (B1) Certification required (must be obtained at minimum).
• Additional ICC certifications (Building Inspector II/III, Combination Inspector, etc.) are a plus.
• Strong knowledge of the California Building Code and related regulations.
• Excellent written and verbal communication skills.
• Ability to interpret and apply codes with fairness, consistency, and professionalism.
• Comfortable using inspection or permitting software (e.g., TRAKiT, Accela, EnerGov) or willing to learn.

Why You’ll Love Working Here

• Medical, dental & vision coverage for you and your family.
• Basic life insurance for peace of mind.
• Health & Dependent Care FSAs to help you plan ahead.
• 401(k) with company match so your future is just as strong as our communities.
• Paid time off & holiday pay to recharge and spend time where it matters most.
• A supportive, tight-knit team that feels more like family than coworkers.
• A culture built on collaboration, respect, and humor. We work hard, help each other, and celebrate wins together.

Compensation

Building Inspector I / II / III: $40.00 to $65.00 per hour, based on experience, certifications, and qualifications.

Apply through LinkedIn or send your resume to