Engineering Structures Scimago Jobs in Pa Remote

We're seeking a knowledgeable and detail-oriented Heat Treat Process Engineering Supervisor to lead and support all aspects of the heat treatment operations with a focus on quality, compliance, and continuous improvement.

POSITION SUMMARY:

The Heat Treat Process Engineering Supervisor serves as a technical expert responsible for ensuring the proper thermal processing of materials to meet metallurgical and production requirements meeting all CQI-9 requirements. This role includes overseeing furnace operations, audits, documentation, process control, equipment maintenance, and continuous improvement initiatives.

The ideal candidate will have strong metallurgical knowledge, heat treat process experience, the ability to troubleshoot equipment and process issues, and the ability to manage compliance in a dynamic manufacturing environment. This role has direct supervisory responsibility for Lab Technicians, including scheduling, performance management, training, and ensuring compliance with laboratory testing standards and metallurgical validation requirements.

ESSENTIAL DUTIES (Complete):

• Oversee and manage daily heat treat operations including carburizing, hardening, tempering, and stress relieving
• Ensure compliance with AIAG CQI-9: Heat Treat System Assessment (HTSA) and other applicable standards
• Implement and maintain heat treat process control plans per AIAG guidelines
• Conduct and lead CQI-9 self-assessments, audits, and ensure closure of gaps and non-conformances
• Ensure proper setup, calibration, and operation of furnaces and quench systems
• Monitor thermal cycles and maintain control charts, pyrometry data, and process records per CQI-9
• Support system accuracy tests (SAT), temperature uniformity surveys (TUS), and instrumentation calibration activities
• Ensure all documentation meets internal and customer-specific AIAG compliance requirements
• Collaborate with Engineering, Maintenance, and Quality to address process improvements and problem-solving
• Perform metallurgical inspections including hardness testing and microstructure verification
• Provide technical guidance to operators and maintenance personnel on best practices
• Develop and optimize heat treat process parameters including atmosphere control, quench severity, and thermal cycle design to meet metallurgical and dimensional requirements
• Atmosphere verification (Carbon Potential, Dew Point, etc.)
• Distortion Mitigation Strategy
• Develop, implement, and maintain training programs to ensure team competency on heat treat systems and compliance
• Lead root cause analysis and corrective action efforts for heat treat-related non-conformities
• Utilize Lean Six Sigma principles to drive cost reduction, efficiency, and quality improvements
• Maintain proper traceability and process documentation for internal and external audits
• Provide technical direction for furnace troubleshooting, repair validation, and upgrade initiatives in coordination with Maintenance
• Perform other duties as assigned or required in support of production and quality goals
• Directly supervise Lab Technicians, including daily work assignments and workload balancing
• Approve timecards, PTO, and manage attendance
• Perform other duties as assigned or required in support of production and quality goals

CORE COMPETENCIES:

• Action oriented: Demonstrates ownership in solving process and compliance issues
• Self-Motivated: Demonstrates ability to take initiative and drive to achieve results. Proactively drives conformance with CQI-9 requirements and continuous improvement
• Accountability: Demonstrates ability to take responsibility and maintains sense of ownership and follow through on commitments. Sets high standards of performance.
• Communication: Demonstrates ability to convey and distribute information effectively and encompass strong speaking, presentation, written and listening skills. Ability to create an environment for open communication, and communicates clearly across departments regarding heat treat and compliance status
• Teamwork: Demonstrates ability to work well with others to accomplish common goals and build a positive climate and trusting relationships within teams.
• Leadership: Demonstrates ability to give direction, motivate, manage and reward performance, provide constructive feedback and foster individual professional development. Trains and guides operators to follow standard operating procedures and compliance guidelines
• Reliability: Demonstrates dependability, accountability and trust. Follows processes and meets commitments. Delivers consistent process performance and regulatory documentation
• Decision-making: Demonstrates ability to discover opportunities in challenges, seek profit and sustainable growth, make courageous while sound decisions and demonstrate a good business understanding. Applies analytical skills and CQI-9 knowledge to make data-driven decisions

KNOWLEDGE, SKILLS & ABILITIES:

• Thorough understanding of heat treatment principles, metallurgy, and thermal processing equipment
• Working knowledge of CQI-9 audits, checklists, gap closures, and AIAG documentation practices
• Familiarity with control system troubleshooting, PLCs, HMIs, and data logging
• Ability to supervise, mentor, and train heat treat personnel on compliance, safety, and process controls
• Skilled in conducting microstructure analysis and hardness testing to validate process results
• Strong organizational and record-keeping skills for always maintaining audit-readiness
• Proficiency in Lean Manufacturing, 5S, and Continuous Improvement
• Physically capable of working in a high-temperature, industrial environment
• Commitment to upholding process integrity and product conformance to specification

WORKING ENVIRONMENTAL CONDITIONS:

• Work involves exposure to high-temperature equipment, hot surfaces, and industrial environments. May encounter fumes, noise, and moving machinery. Personal protective equipment (PPE), including heat-resistant gloves, face protection, and hearing protection, is required. Occasional exposure to quenchants, chemicals, and elevated platforms is expected. Safety training and environmental awareness are critical components of the role.

SUPERVISORY RESPONSIBILITY:

• This role has direct supervisory responsibilities.

The demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions.

QUALIFICATIONS:

• Bachelors degree in Mechanical, Materials, Metallurgical, or Manufacturing Engineering required.
• Materials Science or Metallurgical Engineering preferred
• 7+ years of hands-on heat treat or metallurgical experience, preferably in automotive or aerospace manufacturing
• Demonstrated knowledge and application of CQI-9 Heat Treat System Assessment requirements
• Familiarity with AIAG standards and automotive core tools (APQP, PPAP, FMEA, SPC, MSA)
• Experience conducting and documenting SAT, TUS, and other pyrometry-related activities
• Experience operating batch and continuous furnaces, quench systems, and thermal processing equipment
• Demonstrates ability to directly supervise lab personnel including assigning work, evaluating performance, managing corrective actions, and developing team capabilities.
• Creates accountability, enforces standards, and drives measurable performance improvements.
• Proficient in hardness testing, blueprint reading, GD&T, and metallurgical inspection techniques
• Strong computer skills including Microsoft Office and plant data collection systems
• Excellent troubleshooting, documentation, and analytical skills
• Commitment to safety, quality, and environmental standards
• Ability to lead and train team members on technical and compliance-related topics
• Ability to work independently, manage multiple tasks, and prioritize effectively

Compensation details: 96 Yearly Salary

PI34bc9acf25ca-26289-39818891

Since 1916, the Omni William Penn Hotel has been a landmark of elegance in downtown Pittsburgh. Over the years, we've welcomed movie stars, politicians, world leaders, professional athletes, and business icons—cementing our place as one of the city's most celebrated destinations.

At Omni William Penn, our associates are the heart of our success. We foster an All In culture where respect, gratitude, and empowerment are part of every day. Here, you'll find: A supportive environment with training and mentoring opportunities, Dedicated teammates who take pride in delivering exceptional service, and A workplace where your contributions truly make a difference. If you're a friendly, motivated individual with a passion for serving others, we invite you to bring your talents to our team. Discover the pride and excitement of working for a company known for its tradition of excellence.

To ensure proper training and supervision of all Engineering personnel and to provide consistent, cost-effective maintenance programs that ensure the Hotels safe and efficient operation.

QUALIFICATIONS (Education, Knowledge, Training, & Work Experience)

• Four years experience as a hotel/resort Director of Engineering
• Must have extensive facilities maintenance. HVAC and mechanical experience.
• Prior resort engineering experience and proven leadership experience required.
• Excellent oral and written communication skills and knowledge of computers and technology.
• Must be willing to work weekends and at any other times as required.
• Ability to work in the interior and exterior of the hotel/resort.
• Experience managing a crew of 10 or more.
• Attention to detail and excellent organizational skills.
• Maintain a professional business appearance, attitude, and performance.

ESSENTIAL FUNCTIONS:

• Coordinate and operate, in an economical, legal and safe manner, all H, L, P and R&M for the hotel.
• Inspect physical plant and equipment, and shall supervise maintenance and preventative maintenance program of that area.
• Coordinate with other departments all work necessary to maintain general conditions, safety and health standards set forth by hotel policy and legal requirements.
• Interview, hire, counsel, train, and discipline engineering associates, in coordination with the Director of Associate Services.
• Directly supervises H, L, & P associates in operation and control of utilities to provide efficient operation of hotel services and comfort to guests.
• Recommend to management possible projects for future capital budgets. Obtain bids, supervise and coordinate contractors in performance of project work.
• Maintain own and hotel's special permits and licenses as required by local authorities.
• Control schedules, staffing and payroll of H, L, P, R&M. Compile personnel records, logs utilities and keep Engineering records.
• Process purchase orders in Birchstreet.
• Open and close work request in Synergy.
• Adjust temperature in hotel BMS.
• Maintain historic property while following company guidelines in addition to historic requirements.
• Assist in other departments and attend meetings as needed and manage a positive relationship.

Location: Remote: Reside close to (Exton, PA)

Portfolio: Allen‑Sherman‑Hoff (ASH) Engineered Material‑Handling Systems (ANDRITZ)

About the Role

Allen‑Sherman‑Hoff (ASH), an ANDRITZ business, delivers engineered material‑handling systems that support power generation, biomass, and pulp & paper facilities operating in demanding, continuous‑run environments. Although ASH is technically an OEM, we operate far more like an A&E/EPC engineering firm: we deliver system‑level engineered solutions, integrating ASH proprietary equipment with structural, mechanical, electrical, and quality requirements to meet strict performance expectations.

We are seeking a Project Manager with power, energy, utilities, or EPC/A&E engineered‑systems project experience, someone who has led large, customer‑facing technical projects through engineering, fabrication, manufacturing, quality, and site support.

If your background is in internal manufacturing operations, IT/telecom deployments, or continuous improvement, this role is not a match. We need a PM who understands industrial plant environments, engineered equipment, and the rigor of technical project delivery.

What You Will Do

Lead Full Lifecycle Execution (Sales Handover → Final Turnover)

• Own the delivery of engineered ASH material‑handling systems across power, biomass, and pulp & paper facilities.
• Drive engineering, drafting, and calculation packages to meet scope, schedule, and contractual requirements.
• Coordinate and unblock fabrication/manufacturing, ensuring manufacturability and compliance.
• Manage supplier RFQs, subcontractor performance, expediting, and logistics.

Quality & Technical Documentation Leadership

• Manage ITPs, weld maps, NDE requirements, pressure tests, dimensional checks, and documentation packages essential to engineered‑equipment delivery.
• Validate compliance to ASME/AWS, customer specifications, and ASH quality standards.

Schedule, Cost, and Risk Management

• Maintain schedule baselines using Primavera P6.
• Oversee cost performance, margin drivers, change control, and contract compliance.
• Identify and mitigate technical and execution risks early.

Customer‑Facing Project Leadership

• Serve as the primary interface between the customer and ANDRITZ technical teams.
• Prepare and deliver technical and commercial progress reports.
• Support site activities (FAT, readiness reviews, installation coordination, commissioning support).

What You Bring

Required

• Experience in A&E/EPC, power generation, utilities, or industrial engineered‑systems delivery.
• (Examples: material handling, conveying systems, rotating equipment, mechanical process systems, boiler/balance‑of‑plant equipment).
• Proven ability to lead engineering‑heavy, customer‑facing projects with strict contractual and QA requirements.
• Hands‑on coordination with engineering, fabrication, manufacturing, quality, suppliers, and field service.
• Experience managing ITPs, weld maps, NDE, pressure tests, QA documentation, and technical turnover packages.
• Proficiency in Primavera P6 and Oracle or similar ERP.
• Bachelor’s degree in Engineering/Construction Management OR 5+ years of relevant engineered‑systems PM experience.

Preferred

• Power plant, utilities, biomass, or pulp & paper industry experience.
• Background in ash handling, bulk material handling, or mechanical systems integration.
• PMP or CAPM certification.
• Experience with retrofit, outage, upgrade, or brownfield scopes.

Work Model

• Remote with periodic travel to Exton, PA, fabrication shops, and customer facilities for inspections, FATs, readiness reviews, and site support.
• Travel expected but varies by project phase.

Why This Role Matters

Your work directly affects the reliability, uptime, and environmental performance of major industrial facilities. When you execute well, a power plant runs cleaner, a pulp mill avoids downtime, and a customer sees ASH as a trusted engineering partner. This is real engineering impact, not back‑office project tracking.

*All qualified applicants will receive consideration without regard to protected characteristics.

Structural Steel Estimator / Project Manager

Philadelphia, PA

$90,000 – $130,000 + Benefits

About the Company:

Join a leading structural and miscellaneous steel fabricator with a long-standing reputation for quality, reliability, and integrity. Our projects range from high-rise commercial structures and complex industrial facilities to architectural steel packages across the Mid-Atlantic.

The Opportunity:

We’re seeking a Structural Steel Estimator / Project Manager to support continued growth in the Philadelphia region. This hybrid role combines hands-on estimating and active project management — ideal for someone who thrives on ownership, accountability, and coordination from bid through build.

Key Responsibilities:

Prepare detailed takeoffs, material lists, and cost estimates from design drawings and specifications.

Manage project schedules, budgets, and change orders from award to closeout.

Coordinate with fabricators, detailers, erectors, vendors, and field crews.

Review contract documents, RFIs, submittals, and shop drawings to ensure scope accuracy.

Maintain clear communication with clients, engineers, and GC teams to meet project milestones.

Support proposal development, value engineering, and procurement strategies.

What We’re Looking For:

5–15 years of experience in structural or miscellaneous steel (estimating, project management, or combined role).

Strong technical ability to read and interpret structural drawings.

Proficiency with Bluebeam, AutoCAD, FabSuite, Tekla, or similar platforms.

Strong organizational and client-facing communication skills.

Self-starter with the ability to manage multiple bids and live projects simultaneously.

Why Join Us:

You’ll be part of a tight-knit, results-driven team where your expertise directly impacts outcomes. Expect a steady pipeline of complex, rewarding projects, professional growth, and a company culture built on integrity, collaboration, and pride in the work.

Compensation:

$90,000 – $130,000 base salary (DOE)

Annual performance-based bonus

Full benefits package

Biomedical Equipment Engineering Manager

Philadelphia, PA (Onsite)

Salary: $145,000 + Full Benefits

Full-Time | Leadership Role

We are seeking a Biomedical Equipment Engineering Manager to lead the maintenance, troubleshooting, and operational reliability of medical equipment across a hospital environment in Philadelphia, PA. This is an onsite leadership role responsible for overseeing biomedical engineering operations, ensuring critical medical devices remain safe, compliant, and fully operational to support patient care.

This position will supervise biomedical equipment technicians and engineers while collaborating closely with clinical staff, hospital leadership, and vendors to maintain high standards for equipment performance, safety, and regulatory compliance.

The ideal candidate will bring a strong background in hospital-based biomedical equipment maintenance, medical device troubleshooting, and team leadership within a clinical environment.

Key Responsibilities

• Lead and manage a team of Biomedical Equipment Technicians (BMETs) and Biomedical Engineers responsible for hospital equipment maintenance and support

• Oversee preventive maintenance, repair, and calibration programs for a wide range of medical devices and clinical equipment

• Troubleshoot complex issues involving diagnostic, therapeutic, and patient monitoring equipment

• Ensure all equipment maintenance activities meet hospital regulatory requirements and accreditation standards including Joint Commission and FDA guidelines

• Develop and manage equipment lifecycle planning, including replacement strategy and capital equipment upgrades

• Coordinate with clinical departments to ensure equipment availability and minimize disruption to patient care

• Manage relationships with OEM vendors and third-party service providers for specialized repairs and service contracts

• Implement reliability improvements and maintenance best practices to increase equipment uptime and operational efficiency

• Maintain accurate records and documentation within CMMS / biomedical asset management systems

• Support new medical equipment installations, system integrations, and facility expansion initiatives

• Ensure compliance with hospital safety standards and biomedical engineering best practices

Required Qualifications

• Bachelor’s degree in Biomedical Engineering, Electrical Engineering, or related field

• 5+ years of biomedical equipment experience within a hospital or healthcare system

• 2+ years of leadership or supervisory experience managing biomedical technicians or engineers

• Strong expertise in medical device troubleshooting, maintenance, and preventive service programs

• Experience supporting equipment such as patient monitors, imaging systems, infusion pumps, anesthesia machines, ventilators, and diagnostic equipment

• Knowledge of Joint Commission standards, FDA regulations, and healthcare compliance requirements

• Experience using CMMS or biomedical equipment management systems

Preferred Experience

• Experience managing biomedical operations across multiple departments or hospital campuses

• Familiarity with network-connected medical devices and clinical technology systems

• Certification such as CBET (Certified Biomedical Equipment Technician) or related biomedical certification

Compensation & Benefits

• $135,000 base salary

• Comprehensive health, dental, and vision benefits

• 401(k) with company match

• Paid time off and holidays

• Opportunity to lead biomedical engineering operations in a mission-driven healthcare environment