Engineering Structures Scimago Jobs in Pa

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military or related training required.  CBET certification preferred.

Three to five years experience or equivalent, performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military or related training required.  CBET certification preferred.

Three to five years experience or equivalent, performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

At LB Water Service, we offer more than just a paycheckwe're offering a future. Join a company that values you and your family, provides exceptional benefits, competitive pay, and opportunities for long-term growth and financial securityand we are 100% Employee-Owned! At LB Water Service, we're all about investing in you. Join a team that treats you like family and helps you build the career you've always wanted!

LB Water Service is seeking an experienced Outside Sales Representative with a background in the Waterworks industry or a related field such as Sewer, Stormwater, or Construction.

Job Location: Quakertown, PA Degree Requirements: Bachelor's degree preferred, but not required with relevant experience Experience: 10+ years Relevant Experience: Water, Sewer, Stormwater, Construction, or Manufacturing

General Overview: The Sales Representative will be responsible for managing assigned customer accounts or prospects within a designated geographic region, primarily focusing on Quakertown, PA. This role involves driving new business development, achieving personal sales targets, fostering long-term customer relationships, and addressing specific customer needs. The ideal candidate is an intermediate-level sales professional with a growing understanding of products and markets.

Key Responsibilities:

• Meet personal sales targets, focusing on small to mid-sized accounts within defined markets or territories.
• Engage in periodic coaching sessions with a supervisor or senior sales professional to improve performance.
• Prepare and present sales proposals and presentations for review.
• Participate in company-wide projects such as promotions, product launches, and new marketing initiatives.
• Identify and develop new customer relationships and target prospective projects and accounts.
• Provide accurate and timely quotes to customers.
• Stay updated on industry innovations and specifications relevant to future projects.
• Collaborate with managers on vendor issues and market trends.
• Maintain regular communication with office support staff.
• Cultivate and grow existing customer relationships.
• Maintain an up-to-date understanding of the market landscape and competitors.
• Become the subject matter expert for specifications in the municipalities and territories you serve.
• Serve as the primary problem solver for customer needs, offering innovative solutions.
• Track and follow up on quotes and proposals.
• Uphold fair business practices and effective communication, demonstrating strong listening skills and professionalism.
• Effectively represent and articulate the LB Water brand and maintain relationships with engineering teams.
• Adapt proactively to changing needs and maintain a future-focused approach.

Required Skills and Attributes:

• Strong verbal and written communication skills.
• Highly detail-oriented with excellent organizational skills and the ability to prioritize tasks.
• A team player with the ability to work independently when required.
• Ability to articulate customer needs and provide tailored solutions.
• Adaptable, forward-thinking, and proactive in sales strategies.
• Strong listening skills (ask questions to understand customer needs before offering solutions).

About LB Water: For over 50 years, LB Water has been the leading provider of water, wastewater, and stormwater solutions, delivering the right products, services, training, and support to our customers. From our humble beginnings in Selinsgrove, Pennsylvania, we've grown to ten full-service locations spanning across Pennsylvania, Maryland, Virginia, Ohio, West Virginia, Delaware, New Jersey, and Washington D.C. We are a 100% employee-owned company, highly valuing recruitment and professional development. Our employees, now numbering more than 200, are our core strength and most valuable asset. We are proud to be recognized as one of Pennsylvania's Top 100 Places to Work.

Benefits:

• 100% employee-owned through an Employee Stock Ownership Plan (ESOP).
• Comprehensive medical and prescription coverage with 100% of premiums and deductibles paid by LB Water.
• Dental, vision, life, and disability insurance options available via payroll deduction.
• 401(k) retirement plan with employer contribution.
• Paid vacation, sick leave, and holiday time.

Equal Employment Opportunity Statement: LB Water is committed to equal employment opportunity. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, sex, disability status, sexual orientation, gender identity, age, veteran status, or any other characteristic protected by law.

Previously an industrial community with deep roots in the steel industry, our location today is home to high-performing schools, safe and affordable neighborhoods, a rich historical heritage and a lively culture and arts scene. The University of Pittsburgh at Johnstown, Saint Francis University, Mount Aloysius College, Pennsylvania Highlands Community College and Cambria-Rowe Business College offer numerous educational pursuits. Recreation for all four seasons abounds, including hiking, biking and running trails; winter activities at some of the most acclaimed resorts on the east coast; heritage and craft festivals; and area attractions like Idlewild Park & SoakZone, the All-American Amateur Baseball Association Tournament and interactive museums that celebrate the area's heritage.

APPLY NOW or TEXT Job # and email address to for more details.

I have openings nationwide, so when applying please include your CV, all states of interest, and citizenship status: US Citizen, Green Card, J1, or H1 visa.

Position ID: MR 211718

In our 'always on' world, we believe it's essential to have a genuine connection with the work you do.

Aurora Networks is the world’s leading provider of access network solutions. Our comprehensive, end-to-end product portfolio supports global service providers with innovative, leading-edge HFC, PON and broadband network products

.

We’re looking for bold thinkers and exceptional builders—engineers who thrive in highly technical environments and want to design hardware that powers the connected world. If you enjoy solving tough engineering challenges, collaborating with a talented cross‑functional team, and owning designs from concept through production, this is the role for you.

How You’ll help us connect the world:

As a Power Hardware Engineer reporting to the Sr. Manager of Hardware Engineering, you will play a key role in architecting and developing stand‑alone and embedded power supplies for indoor and outdoor CATV/networking equipment. You’ll work hands‑on across the entire product lifecycle—from early concept, modeling, and prototyping to validation, manufacturing, and sustaining engineering.

What You’ll Own

• Lead electrical design of SMPS‑based power supplies from concept through production release
• Design for challenging environments, ensuring high reliability and robustness
• Perform electrical, thermal, and DVT measurements throughout all stages of development
• Model, breadboard, and build prototypes for rapid iteration and validation
• Design and specify custom magnetic components for advanced SMPS designs
• Develop and optimize digital and analog control interfaces
• Mitigate input/output noise and improve power quality and efficiency
• Provide sustaining engineering support for existing power supply platforms
• Partner with manufacturing and supply chain teams to qualify alternate components and improve production efficiency

Required Qualifications:

• 7+ years of hands‑on SMPS design experience, including topologies such as Forward, Flyback, Buck, Boost, etc.
• Deep experience designing and specifying magnetics for power conversion
• Strong background in analog and digital power control circuits
• Solid understanding of noise mitigation, EMI/EMC considerations, and power integrity
• Strong knowledge of discrete semiconductors and passive components
• Proficiency with electrical modeling and simulation tools (e.g., SPICE‑based tools, simulation suites)

• Re-location assistance will be provided for candidates within U.S.

.Important Candidate Notice: On January 9, 2026, CommScope finalized the sale of its Connectivity and Cable Solutions segment, which included the CommScope name and brand, to Amphenol Corporation. The remaining businesses — Access Networks Solutions (now rebranded as Aurora Networks) and RUCKUS Networks have been unified under the new parent company, renamed as Vistance Networks. The role being advertised is part of Aurora Networks.

Why Join Us?

Vistance Networks shapes the future of communications technology, pushing past what is possible. We deliver solutions that bring reliability and performance to a world always in motion. Our global team of innovators and employees are trusted advisors who listen to customers first, then deliver

value.

Aurora Networks (formerly CommScope’s Access Networks Solution segment) is the world’s leading provider of access network solutions. Our comprehensive, end-to-end product portfolio supports global service providers with innovative, leading-edge HFC, PON and broadband network products.

If you want to grow your career alongside bright, passionate, and caring people who strive to create what's next…..come connect to your future at Vistance Networks.

Vistance Networks is an Equal Opportunity Employer (EEO), including people with disabilities and

veterans.

We are a U.S.-based, privately held, mid-sized company operating in the aftermarket industrial sector. With a global footprint, we provide engineering services and repair solutions for high efficiency pumping equipment across key industries including oil and gas, steel, nuclear, and pulp and paper. With our corporate headquarters in Chicago, IL, our company prides itself on technical expertise, customer service, and strategic growth across international markets.

We are offering a home-based remotely based sales opportunity for an Account Manager position.

This person will be responsible for the identification, development and implementation of sales strategies and customer solutions in a defined territory and specific customer base in the Refinery, Power Plants, and Oil and Gas markets located in and along the territory within:

Territory – Western Pennsylvania, Western New York and West Virginia.

Sales responsibilities will be for aftermarket pump repairs plus parts, reliability services, sensors and field service within your assigned region. You will be conducting business development activities, cultivating customer relationships, identifying opportunities for growth, closing new business and ensuring business objectives/strategies are met within a company with a supportive culture, including our technical and sales resources to help you be successful in your role. You will have many resources available to you including a 5,000 HSP test lab, strong engineering support, high quality marketing tools, including media, brochures, case studies and training resources. You will also have access to experienced shop personnel who believe in providing our customers with a high-quality value solution.

Essential Job Accountabilities:

• Maintain current relationships with key accounts and prospect new customers continuously.
• Execute sales calls and identify new opportunities with both existing customers and new accounts in assigned geographical area.
• Grow sales within geographic territory in alignment with assigned revenue and new account development targets.
• Report sales activities in Salesforce CRM Software.
• Provides continuous improvement in sales coverage and effectiveness developing key areas and markets to include market share information and action plans.
• Provide technical support to customers and interfaces with engineering to assure best hydraulic fit and optimal equipment efficiency.
• Develop sales forecasts for the region.
• Define and assist management in developing solution-based proposals that will demonstrate product value to new and existing customers while optimizing revenue and profit of sale.
• Participate in weekly production /sales meeting to inform management of current and future activity.
• Work collaboratively with operations to identify and maximize margins and business profitability.
• Attend trade shows and industry events that impact business and build customer rapport.
• Effectively promote all of Hydro's value-added products and services, utilizing a "Total Solutions" sales strategy.
• Continuously build the Hydro brand, both in person and in social media presence.
• Manage travel and entertainment expenses in accordance with budgets and corporate policies.
• Travel up to 75% for in-person meetings at customer facilities within assigned geographic territory.

Job Requirements:

To perform the job successfully, an individual should demonstrate the following competencies:

• Minimum education requirements include technical degree (mechanical engineering preferred) or equivalent combination of experience and education.
• 5 years prior experience as a Sales Engineer, Field Service Engineer or mechanical engineer or similar.
• Experience and knowledge of aftermarket service and solutions related to rotating equipment primarily with pumps.
• Superior technical skills with an in-depth knowledge of various types of pumps and pumping systems and a demonstrated knowledge of historical pump information along with a solid understanding of theoretical pump technologies.
• Strong business acumen and understanding of profitability in a service business environment
• Possess the ability to define problems, collect data and establish facts and valid conclusions.
• Have outstanding Customer Service skills and abilities in conjunction with a positive attitude and demeanor in sales settings and at site facilities.
• Proficient computer skills including Microsoft suite applications, with above average Excel and CRM experience.
• Must possess a high attention to detail, have exceptional time management skills.
• Have strong analytical and problem solving skills with an understanding of the root cause failure analysis process.
• Ability to facilitate solutions in a fast paced, complex technology, and business environment.
• Ability to work independently and be self-motivated while also being able to work effectively in a team environment.

Work Environment:

• Work is generally performed in a office environment and there will be instances that require activities in an industrial setting.
• Individual is required to comply with safety standards and regulations and use proper PPE.

We offer a full benefits package with a matching 401k and an entrepreneurial opportunity in a privately held organization.

Description:

The Director of Operations will oversee all production and facility operations at ALIGN Precision Philadelphia, ensuring seamless execution across precision machining, assembly, and cleanroom environments. This role will serve as the operational hub, coordinating with the Director of Planning & Delivery and Director of Quality to deliver on customer commitments while driving efficiency, safety, and culture. Reporting directly to the Site General Manager, the Director of Operations will translate strategic goals into daily execution and long-term capability building.

Essential Duties and Responsibilities:

Production & Facilities

• Provide leadership to a staff of Production Supervisors and CNC Programmers.
• Lead machining, CNC programming, assembly, and cleanroom operations.
• In cooperation with the Director of Maintenance, oversee facilities management, equipment utilization, and preventive maintenance.
• Ensure Safety, Quality, Delivery, and Cost targets are consistently achieved.
• Develop the operations and capital equipment budget.
• Champion 5S workplace organization.

Scheduling & Capacity Planning

• Develop daily plans and execute production schedules against the master schedule.
• Cooperate with Planning and Delivery through the SIOP process providing inputs into capacity planning and modeling, aligning with the supply chain and customer demand.
• Partner with Planning and Delivery to balance inventory strategies with operational readiness.
• Collaborate with Quality and Engineering to embed process controls and ensure compliance.

Continuous Improvement

• Drive Lean, Six Sigma, and Kaizen initiatives across production areas working closely with Engineering.
• Implement systems for performance metrics, accountability, and operational transparency.
• Champion waste reduction, cycle time improvement, and productivity gains.

Culture & Leadership

• Build a culture of engagement, accountability, and innovation.
• Mentor supervisors and team leads, fostering psychological safety and high performance.
• Facilitate employee engagements and cross-functional collaboration to surface systemic themes.

Cross-Functional Alignment

• Act as the connective agent between Planning and Delivery, Quality, Engineering, Program Management and Business Development.
• Support business development by ensuring operational readiness of our expanded cleanroom and CNC automation for new verticals.
• Collaborate with leadership to embed strategic operating systems across the enterprise.

Qualifications:

• Bachelor’s degree in Engineering, Operations Management, or related field.
• 10+ years of leadership experience in precision machining, semi-conductor, aerospace, medical devices, or advanced manufacturing.
• Proven success in production leadership, scheduling, and facilities management.
• Strong background in Lean, Six Sigma, and operational excellence.
• Excellent leadership, communication, and team-building skills.
• Ability to balance strategic vision with hands-on execution.

Other Skills Required:

• Communications - Exhibits good listening and comprehension.

• Business Acumen - Understands business implications of decisions; displays orientation to profitability; demonstrates knowledge of market and competition. Aligns work with strategic goals.

Language Skills:

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

Mathematical Skills:

Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

Reasoning Ability:

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

Computer Skills:

To perform this job successfully, an individual should have an understanding of Microsoft Office Software- especially knowledge of Microsoft Word and Microsoft Excel.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee will be in the office and shop and required to sit, stand and walk.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

ADDITIONAL NOTES:

ALIGN Precision is an Equal Opportunity Employee and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ALIGN Precision are employed on an at-will basis.

This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)

JOB OVERVIEW:

The Validation Scientist position encompasses all areas of Technical Services with primary focus on technology transfer, scale-up, process optimization, process/packaging validation, commercial production technical support as well as equipment qualification and cleaning validation support.

KEY ROLES/RESPONSIBILITIES:

• Lead and execute projects such as technology transfer, scale-up, process optimization process/packaging validation as well as equipment qualification and cleaning validation support to meet critical project deadlines.
• Provide technical support in the investigation of manufacturing incidents and major deviations. Assure thoroughness of investigation and documentation as well as implementation of preventive/corrective actions as necessary.
• Conduct commercial production technical support activities such as qualification of alternate suppliers of API, excipients and packaging components, equipment change parts, process parameters, yield limits, hold time studies, etc.
• Execute utility and process equipment qualification support activities such as installation, operational and performance qualifications, periodic reviews, investigations, assessments, review change control and non-routine maintenance requests, out of specification calibrations, etc.
• Perform cleaning validation support activities such as execution of cleaning validation and verification studies, hold time studies, investigations, assessments, justifications, maintain cross contamination program, etc.
• Develop and/or execute experimental designs and approaches to resolve technical problems and utilize engineering standards, principles, concepts, equations as well as statistical techniques.
• Prepare and review documents to support projects, such as laboratory notebooks, protocols, reports, assessments, justifications, investigation reports, regulatory submissions, master batch records, change control, etc.
• Complete and document physical sampling and testing such as loss on drying, particle size distribution, bulk density, viscosity, pH, tablet weight, thickness, hardness and friability; sample for analytical and microbiological testing.
• Author and periodically update assigned Standard Operating Procedures (SOPs) for the department.
• Represent Technical Services at project team meetings and provide sound technical advice.
• Coordinate and interface with Operations, Facility Engineering, Quality Control, Quality Assurance and Regulatory Affairs groups to assure successful project execution.
• Directly interact with Piramal Pharma Solutions clients.
• Maintain regulatory compliance within the function and follow site safety, health, and environmental policies and procedures.

EXPERIENCE:

• Minimum of a Bachelor's degree in a scientific discipline (e.g., Chemical Engineering, Pharmaceutics, Pharmacy, Chemistry or equivalent) with a minimum of 3 years experience in Technical Services, Process Engineering, Process Validation, Formulation or related field in the pharmaceutical industry.
• Experience in laboratory and production scale manufacture of solid oral, liquid and semi-solid dosage forms using equipment such as comminuting mills, high-shear granulators, fluid bed dryers, blenders, tablet presses, tablet film coaters, encapsulates, low and high-shear mixing vessels, homogenizers, pumps, packaging, etc.
• Working knowledge of cGMP (Current Good Manufacturing Practices) regulations, SUPAC guidance, and general compliance expectations.
• Working knowledge of investigational techniques, including but not limited to root cause analysis, risk assessment impact evaluation, and technical report writing.
• Must possess research and problem solving abilities and be capable of producing detailed documentation, understand and make generalized and specific conclusions from project data.
• Technical writing experience is required with attention to detail skills essential.
• Must be able to work in a team environment with effective project planning/management, analytical thinking, organization, and execution skills.
• Must have proficiency in the Microsoft Office Suite programs.
• Demonstrated professionalism and excellent communication skills with internal and external personnel are essential.
• Ability to work effectively managing multi projects at a fast pace withcross-functional departments and manage priorities to meet timelines.
• Must be innovative, proactive, resourceful and committed to continuous improvement.
• Working knowledge of cGMP data management systems (EDMS, Trackwise, and/or SAP) is preferred.

WORK ENVIRONMENT:

The position requires the ability to work in ahigh demand office and manufacturing setting with time spent performing "on the floor" activities in laboratory and manufacturing areas. The position may require extended hours including evenings and weekends as well as work hours on 2nd and 3rd shifts depending on project needs.