Engineering Structures Login Jobs in Hell, MI

Electrical Systems Engineer – High Voltage Vehicle Systems

Location: Troy, MI

Job Type: Full-Time

Hiring Partner: Raizan Solutions LLC (Authorized hiring partner – We do NOT charge candidates)

About the Client

Our client is an engineering and manufacturing company specializing in advanced battery systems, high-voltage power distribution, ruggedized energy systems, and custom electrification solutions. They support OEM, commercial vehicle, specialty, and defense customers with rapid prototyping and production-intent system development.

Raizan Solutions LLC is recruiting on behalf of this client. We act solely as the hiring partner and do not charge candidates any fees.

Position Summary

The Electrical Systems Engineer will lead and support the development of high-voltage battery systems, power distribution architectures, and vehicle-level electrical integration. This role spans system design, requirements, embedded controls coordination, safety analysis, and hands-on prototype validation.

You will collaborate closely with mechanical, controls, software, and manufacturing teams to deliver robust systems through the full development cycle—from concept to system launch.

Key Responsibilities

Electrical & System Design

• Design and document electrical architectures, schematics, wiring diagrams, and component selections for Li-ion battery systems, HV distribution, and vehicle integration.
• Develop and maintain system requirements, interface definitions, DFMEAs, PFMEAs, DVP&R, and system test plans.
• Apply strong engineering knowledge of HV components: contactors, switches, HVIL, insulation, isolation monitoring, safety interlocks, bus bars, sensors, and protective devices.
• Support PCB/hardware development efforts (Altium preferred; OrCAD or equivalent considered).

Controls & Software Integration

• Coordinate with controls and software teams on system behaviors, state machines, protection logic, and calibration.
• Support embedded controls development using MATLAB/Simulink/Stateflow, model-based design, and C-based integration review.
• Use CAN tools (Vector CANalyzer, CANape) to evaluate control systems, validate functionality, and troubleshoot issues.

Testing, Validation & Debug

• Develop validation test procedures for system-level and component-level verification.
• Perform hands-on prototype testing, fault evaluation, root-cause analysis, and troubleshooting of high- and low-voltage systems.
• Follow lab and vehicle test procedures to evaluate system performance, safety interactions, and functional behavior.

Program & Cross-Functional Coordination

• Work with internal team members and external suppliers to ensure successful design, build, and validation.
• Participate in recurring technical review meetings to identify risks, integration issues, and quality concerns.
• Assist in project planning—tracking timing, risks, status, and technical deliverables.

Documentation & Build Support

• Generate and coordinate build documentation, assembly instructions, inspection sheets, and test records.
• Support prototype build reviews, manufacturing handoff, and initial production readiness.

Qualifications

Education

• Bachelor’s degree in Electrical Engineering, Controls, Computer Engineering, or Mechatronics from an accredited institution.
• Equivalent experience will be considered.

Experience

• 5–15 years of experience in electrical or systems engineering for EV, hybrid, automotive, heavy vehicle, or defense systems.
• Proficiency in electrical system architecture, safety concepts, and requirements flow-down.
• Experience with:
• MATLAB/Simulink/Stateflow
• LabVIEW
• Vector CANalyzer / CANape / CAN tools
• SPICE / PSpice
• Controls platforms (MotoHawk, dSPACE, ETAS preferred)
• Hands-on experience with high-voltage battery systems, inverters, DC-DC converters, BMS, and vehicle electrical integration.
• Familiarity with EV industry standards, ISO 26262 concepts, and relevant military or commercial vehicle standards (preferred).
• Experience with PCB design tools (Altium) is a plus.

What You Bring

• Strong analytical and problem-solving skills.
• Ability to manage multiple technical tasks in a fast-paced, hands-on environment.
• Excellent communication, collaboration, and documentation capabilities.
• A proactive mindset with strong attention to detail.

Why Join This Opportunity

• Work on cutting-edge battery systems, high-voltage electrification, and ruggedized energy products.
• Be part of a small, agile engineering environment with meaningful technical ownership.
• Exposure to diverse projects and close collaboration with customers and leadership.
• Competitive compensation and opportunities for long-term growth.

Apply Today

If you’re ready to help drive the future of advanced electrified systems and thrive in a collaborative, hands-on engineering environment, Raizan Solutions LLC would be happy to connect.

Salem Surround - Detroit, a division of Salem Media Group, offers an exceptional opportunity for a Media Strategist / Account Executive. We are seeking a highly motivated sales professional to join our growing on-air and digital sales team. The individual selected will sell and manage multi-media marketing solutions, including OTT/CTV and sales, targeting regional/national small and medium-sized businesses. Success will be measured by reaching monthly, quarterly, and annual sales goals, while continuously developing new business opportunities to meet and exceed client expectations.

Prospect for local and regional businesses, reaching decision-makers, setting meetings, analyzing client needs, and creating and delivering compelling advertising presentations that align with client objectives.

Conduct research and stay current on local digital marketing trends and digital marketing opportunities.

Create and present strategic marketing proposals to key accounts and new business decision-makers.

Accurately project revenues, meet and exceed monthly sales targets across all product lines, and surpass annual sales goals.

A proven track record of exceeding sales goals in both on-air and online media.

In-depth knowledge of digital products and their positioning and sale in the marketplace.

Experience in selling Search Engine Marketing (SEM), Search Engine Optimization (SEO), Target Display, OTT/CTV, social media, Email Marketing, Chat, Website Development, and other digital marketing solutions.

A demonstrated ability to identify and understand business categories to target for prospecting.

History of performing in-depth needs analysis, uncovering client needs, and providing tailored solutions backed by data that justifies the sale.

Exceptional written and verbal communication skills, with the ability to present multi-faceted solutions to clients or groups.

Proven success in developing business marketing strategies for both local and regional clients.

Maintain a professional appearance and demeanor in all client-facing situations.

Ability to work effectively with a diverse group of clients across various industries.

Competitive pay structure based on experience.

Health, dental, vision, and life insurance.

401k retirement plan.

Paid holidays and vacation time.

Come see how Salem is DIFFERENT and why we've been certified as a \"Great Place to Work\" and as a \"Best and Brightest\" equal opportunity employer.

The General Manager (GM) –Battery Testing is responsible for the full P&L, operational leadership, commercial growth, and regulatory compliance of a mobility-focused TIC laboratory. The lab supports automotive, EV, aerospace, rail, and advanced mobility customers with testing, inspection, and certification services.

The GM ensures technical excellence, regulatory compliance (ISO/IEC 17025 and applicable mobility standards), strong client relationships, and profitable growth while maintaining a culture of safety, quality, and operational discipline.

Key Responsibilities

1. P&L & Business Leadership

• Own full profit and loss responsibility for the mobility laboratory.
• Develop and execute annual operating plans, budgets, and growth strategies.
• Drive revenue growth across automotive, EV, aerospace, rail, and next-gen mobility sectors.
• Monitor KPIs including revenue, margin, utilization, backlog, and cash flow.
• Optimize cost structure while maintaining service quality and accreditation compliance.

2. Commercial & Customer Strategy

• Partner with Sales and Business Development to grow key accounts and strategic OEM relationships.
• Identify new service opportunities (battery testing, EMC, environmental, durability, ADAS validation, etc.).
• Strengthen relationships with mobility OEMs and Tier 1 suppliers.
• Represent the lab in industry forums and with regulatory bodies.

3. Operations & Technical Oversight

• Oversee daily laboratory operations including testing, scheduling, capacity planning, and equipment utilization.
• Ensure compliance with International Organization for Standardization ISO/IEC 17025 and other applicable standards (SAE, IEC, UL, FMVSS, etc.).
• Maintain accreditations through bodies such as ANAB or equivalent.
• Drive continuous improvement initiatives (Lean, Six Sigma, automation).
• Ensure capital investment planning aligns with market demand and ROI targets.

4. Quality & Regulatory Compliance

• Maintain rigorous adherence to safety and quality systems.
• Lead internal and external audits.
• Manage risk mitigation strategies.
• Ensure testing integrity and data reliability for certification purposes.

5. People Leadership

• Lead multidisciplinary teams including engineering, technicians, quality, and commercial staff.
• Recruit, develop, and retain high-performing technical talent.
• Foster a culture of accountability, safety, and customer focus.
• Develop succession planning and leadership bench strength.

6. Strategic Growth & Innovation

• Evaluate new testing technologies (EV battery abuse testing, hydrogen systems, autonomous systems validation).
• Expand lab capabilities in alignment with electrification and advanced mobility trends.
• Support digital transformation initiatives (LIMS, automation, data analytics).

Qualifications

Education

• Bachelor’s degree in Engineering (Mechanical, Electrical, Automotive, or related field required)
• MBA preferred

Experience

• 10+ years in TIC, automotive testing, aerospace testing, or related technical services
• 5+ years in senior leadership or GM-level responsibility
• Demonstrated P&L management experience
• Strong knowledge of mobility regulatory frameworks and certification pathways

• Overall support of regional PMO
• Facilitate the continuation of Business Excellence in Program (BEP) functions and deliverables
• Monitor, report and drive improvement for the program management key indicators (KPI’s)
• Manage and lead monthly report-out (MPR) meetings
• Coordinate Gate reviews and assist in customer PM launch at the manufacturing level
• Drives development and improvement of PM methods and tools
• Assist with Account Management activities
• Assist with RFQs, pricing strategies, and commercial negotiations
• Serve as primary commercial contact for all plant customers.
• Monitor and review EDI releases in coordination with the Supply Chain team.
  
  

• Bachelors Degree in Engineering, Supply Chain or Business
• 2-5+ years experience in the Program Management or Sales / Account Management and Customer Liaison role.
• 2+ years experience working for an automotive / commercial vehicle or defense supplier
• Must have knowledge of Powertrain, Engine, Driveline related products (Propulsion systems) is required
• Knowledge of basic commodity BOM related to Metal Stamping, Forging, Casting, etc. is required
• Prior experience assisting with customer program launch for the manufacturing cycle (Quoting, SOP, Kickoff, Gate Reviews, etc.)
• Understanding of basic quality principals including APQP and PPAP customer standards
• Hybrid role work in office 3 days week and 2 days work from home per week
• Ability to travel internationally or domestically by car or plane - 25%
• Ability to work in a small team of 5 Sales and Account / Program Management professionals
• To perform this job successfully, an individual must have good oral and written skills, must be able to vertically present information
• Ability to analyze data and prepare reports, statements and cost projections.
• Ability to read and comprehend basic engineering drawings (GD&T), correspondence, and memos, and write correspondence.
• Analytical- Synthesize complex or diverse information; Collects and researches data; Uses intuition and experience to complement data; Designs work flows and procedures.
• Business Acumen- Understands business implications of decisions.
• Knowledge of continuous improvement and quality standards of products for manufacturability.
• Knowledge of engineering fundamentals, mechanical systems, automotive systems, and engine / powertrain systems.
• Project Management- Develops project plans; Coordinates projects; Communicates changes and progress; Completes projects on time and budget; Manages project team activities.
• Strives to continuously improve expertise, knowledge and skills.
• Strong Customer Service – Ability to manage difficult customers Responds promptly to their needs; Responds to requests for service and assistance; Meets commitments.
  
  

Maintenance Technician C (I)

Transdev in Romulus, MI is seeking a C-Level Diesel Mechanic to bolster our team. This role demands expertise in diagnosing, repairing, and maintaining diesel engines across various vehicles and equipment. As a Diesel Mechanic, you'll play a crucial role in ensuring safety, efficiency, and longevity for our vehicles.

Transdev is proud to offer:

Non-CBA Position:

• 
  
• Competitive compensation package of minimum $24.00 / hour – Maximum $30.00 / hour
  
  

Benefits include:

Vacation: minimum of two (2) weeks

Sick days: 5 days

Holidays: 12 days; 8 standard and 4 floating

Other standard benefits: 401(k) retirement plan, medical, dental and vision, life insurance, short-term disability, voluntary long-term disability.

Company paid ASE testing, training materials, and tool reimbursement

Benefits may vary depending on location policy. The above represents the standard Corporate Policy.

Key Responsibilities:

• 
  
• Perform repairs and replacements on diesel engines, ensuring optimal functionality.
  
  
• Assist A-Level and B-Level Mechanics in advanced diagnostic and repair tasks, contributing to efficient workflow.
  
  
• Execute routine maintenance tasks to prevent breakdowns and optimize diesel engine performance.
  
  
• Lead diagnostic tests to accurately identify complex issues and determine comprehensive repair strategies for diesel engines.
  
  
• Perform advanced troubleshooting and repair tasks on diesel engines, including overhauling and rebuilding components to required specifications.
  
  
• Other duties as required.
  
  

Qualifications:

• 
  
• 2 years of experience as a Diesel Mechanic.
  
  
• ASE certifications required; ASE certification program provided
  
  
• Mechanic’s Tool Set
  
  
• Must be able to work shifts or flexible work schedules as needed.
  
  
• Subject to DOT drug testing and physical if applicable. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including cannabis, for any reason.
  
  

Physical Requirements:

The essential functions of this position require the ability to:

• 
  
• Work outside in varying temperature, weather, and humidity conditions-100% of the job is performed outside, work alone and in remote locations.
  
  
• Sit for extended periods (up to 6–8 hours per day); frequently walk for long distances and on possible sloped ground or slippery and uneven surfaces
  
  
• Push and pull objects up to XX pounds, occasionally throughout the workday; lift material weighing up to 50 lbs. with or without assistance; occasionally bend, kneel, or crouch to files or equipment stored at ground level
  
  
• Withstand heavy traffic areas while performing the duties of the job; tolerate exposure to considerable amounts of dust, vehicle fumes and noise.
  
  

Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Transdev complies with federal and state disability laws and makes reasonable accommodation for applicants and candidates with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, please contact

Drug-free workplace:

Transdev maintains a drug-free workplace. Applicants must:

• 
  
• Be eligible to work in the United States without requiring sponsorship now or in the future (if based in the U.S.).
  
  
• Successfully pass a pre-employment drug screen.
  
  

About Transdev: Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles.

Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev – the mobility company – empowers the freedom to move every day thanks to safe, reliable, and innovative solutions that serve the common good. Find out more at watch an overview video at

The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions upon request. 30

Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status.

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions upon request.

California applicants: Please Click Here for CA Employee Privacy Policy.

Job Category: Mechanics/Technicians

Job Type: Full Time

Req ID: 6821

Pay Group: DVF

Cost Center: 55437

The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified.

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request.

Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law.

Drug-free workplace

If based in the United States, applicants must be eligible to work in U.S. without restrictions for any employer at any time; be able to pass a drug screen and background check.

California applicants: Please Click Here for CA Employee Privacy Policy.

About Transdev

Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles.

Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev – the mobility company – empowers the freedom to move every day thank to safe, reliable, and innovative solutions that serve the common good. Find out more at or watch an overview video.

Description

Looking for a job that can grow into a lifelong career?
At Lactalis USA, we believe in promoting from within and giving our employees meaningful opportunities to learn, grow, and thrive. Whether you're just starting out or bringing years of experience, we'll provide the tools and support you need to succeed.

Lactalis is the world leader in dairy-a family-owned company with over 85,000 pragmatic and ambitious professionals across the globe. Every day, we're proud to produce award-winning dairy products that bring people together every day.

In the US, we offer an unrivaled house of beloved brands, including Galbani Italian cheeses and ricotta, President specialty cheeses and butters, Kraft natural and grated cheeses, Breakstone's cottage cheese, Cracker Barrel, Black Diamond cheddar, and Parmalat milk. Our yogurt portfolio includes siggi's, Stonyfield Organic, Brown Cow, Oui, Yoplait, Go-Gurt, :ratio, Green Mountain Creamery, and Mountain High, along with sour cream and a growing family of ethnic favorites like Karoun, Gopi, and Arz.

At Lactalis, we live by our core values-Ambition, Engagement, and Simplicity. We're building a workplace where innovation thrives, diverse perspectives are celebrated, and everyone's unique background and ideas are valued.

Even if you don't meet every qualification, we encourage you to apply. We want to hear about your PASSION, your STORY, and how your EXPERTISE can help us make an impact.

From your PASSION to ours

Do you have curiosity of how things work? Do you love to solve problems and continuously improve? As a Packaging System Engineer (SE) in our Reed City, MI yogurt plant, you will take ownership of your assigned filling and packaging systems and work with the team to continuously improve performance. You will provide technical leadership for the equipment and processes on your systems. The SE is responsible to identify, develop, and lead execution of solutions for performance improvements and capacity solutions through strong business partnership, strategic productivity, and continuous improvement efforts.

From your EXPERTISE to ours

Key Accountabilities

• Demonstrate clear understanding and execution of human and food safety practices in food manufacturing plant
• Demonstrate expertise in manufacturing information systems, quality metrics, analysis methods and procedures
• Leverage and advance system capability through people, process and technology
• Lead and support technical improvements on your systems
• Coach and provide technical expertise on problem solving and continuous improvement activities
• Provide leadership support for Technical Resources (including maintenance technicians, controls TECHs, etc.)
• Identify, vet and implement productivity solutions on your assigned lines.
• Partner with R&D, Quality, Operations, and Engineering/Maintenance to drive system improvements & reduce losses
• Lead development of future state of your systems and provide technical expertise in development of improvement plan
• Develop and champion a system vision, technical road map and capital needs to support Long Range Plan for your systems.

Requirements

From your STORY to ours

Qualified applicants will contribute the following:

MINIMUM QUALIFICATIONS

• Bachelor of Science degree in Mechanical, Chemical, Electrical, Ag/Food Process Engineering or related degree with extensive food manufacturing experience
• Strong interpersonal skills, effective written and oral communications, strong listening skills, strong coaching/teaching skills.
• Ability to learn quickly and curious to dig into challenges to identify and correct root cause.
• Demonstrated technical leadership, adaptability, analytical and problem-solving skills, decision making, troubleshooting, communications, team management, and human relations skills
• Strong ability to interact with operators and mechanics as well as other departments in the plant and at corporate.
• Be innovative, resourceful, and work with minimal direction
• Have excellent organization, problem solving, communication, and team leadership skills
• Have ability to multi-task, prioritize your work and make data driven decisions
• Ability to read and develop equipment and process flow diagrams
• Ability to work well with computer Office applications, particularly Microsoft Excel
• Have a working knowledge of plant manufacturing, engineering, quality, and research functions

PREFERRED QUALIFICATIONS

• 3+ years in relevant food manufacturing with Engineering experience
• Experience working in dairy manufacturing.
• Experience with food packaging materials
• Strong Mechanical and Electrical Aptitude

At Lactalis, we offer a comprehensive Total Rewards Program with a variety of affordable benefits and coverage options. We support insurance costs significantly, contribute generously to retirement plans, and offer Paid Time Off from day one. We are committed to your professional growth, providing training and development opportunities, including Education Reimbursement. Join us and grow your career.

Lactalis is an equal employment opportunity employer. We will not discriminate against applicants with regard to any legally-recognized basis including, but not limited to: veteran status, race, color, religion, sex, national origin, age, marital status, sexual orientation, and physical or mental disabilities.

Key Responsibilities

• Develop and support the design of exterior components and assemblies from concept through production using CAD. Ensure designs meet functional, aesthetic, and manufacturability requirements.
• Manage the release of production-ready parts, drawings, and Bills of Material (BOM) through PLM systems such as Teamcenter while supporting program milestones and engineering documentation.
• Work closely with suppliers on feasibility, design for manufacturing (DFM), tooling development, and technical reviews to ensure parts meet cost, quality, and timing targets.
• Support validation activities including DVP&R development, testing coordination, and design verification to ensure components meet durability, fit, finish, and performance standards.
• Partner with Styling, Studio, Manufacturing Engineering, CAE, and Program Management teams to ensure exterior components align with vehicle styling intent and production requirements.
• Support DFMEA development and manage engineering changes (ECR/ECO) to resolve design issues and improve product quality throughout the development cycle.
• Provide engineering support during prototype builds, pilot builds, and production launch to address fit, finish, and assembly concerns.

Required Qualifications

• Bachelor’s degree in Mechanical Engineering, Automotive Engineering, or a related engineering discipline.
• 3–8+ years of experience in automotive exterior trim design, development, or release engineering.
• Experience using CATIA V5/V6, or similar CAD software for 3D modeling and design development.
• Understanding of plastic injection molding, composite materials, tooling development, and painted exterior components.
• Experience with GD&T, DFMEA, DVP&R, and PPAP processes.
• Familiarity with automotive regulatory requirements such as NHTSA and FMVSS related to exterior vehicle components.

Job Title: Automotive Training and Development Consultant

Duration: 12 Months (Possibility of extension)

Location: Detroit, Michigan

Client is looking for an Automotive Training & Development Consultant located in the Detroit, Michigan area.

This position is responsible for analysis, research, development and delivery of manufacturing processes and technical launch training with on-site support to OEM vehicle assembly plants in the US, Canada and Mexico.

Roles and responsibilities include:

• Provide on-site training and support at each of the OEM vehicle assembly plants
• Instruct and consult plant process and repair personnel to improve their understanding of the vehicle and its highly intricate and interconnected systems and subsystems
• Present and demonstrate efficient and effective methods of diagnosing and correcting vehicle assembly, vehicle electrical systems and sub-system deficiencies
• Conduct root cause analysis to accurately identify the cause(s) of assembly and vehicle deficiencies
• Act as the training liaison between product/manufacturing engineering and general assembly by creating, designing and developing training materials related to vehicle assembly process, electrical harness manufacture, vehicle electrical system architectures and schematics
• Communicate and share lessons learned, developed training materials and information gathered in support of one plant project with remaining plants on a timely basis
• Analyze and identify future training needs for each of the OEM vehicle assembly plants
• Support and participate in plant launch meetings and provide training reports to Raytheon management, the OEM management and OEM launch teams
• Interface with engineering, component suppliers and vendors to validate and develop training materials for the manufacturing process, vehicle and vehicle electrical sub-systems prior to the Start of Regular Production (SORP)
• Research and compile manufacturing processes and technical information to be included in training course materials, such as, but not limited to engineering schematics, work in process service information, engineering documents, engineering math data and manufacturing reports

Required Skills:

• Minimum four years of experience as an automotive instructional designer, training developer, automotive instructor and/or manufacturing instructor
• Demonstrated knowledge of automotive systems from an advanced diagnostics perspective
• Demonstrated knowledge of OEM manufacturing tracking and reporting systems
• Demonstrated knowledge of OEM manufacturing dynamic vehicle testing systems
• Ability to develop professional training materials using pre-launch documents
• Ability to read and interpret a digital multimeter, OEM diagnostic scan tool and other automotive related diagnostic test equipment
• Ability to effectively conduct one-on-one and group presentations Ability to interpret early engineering level electrical schematic diagrams
• Ability to read OEM supplier electrical harness prints
• Strong working knowledge of Microsoft Office
• Extensive travel flexibility. Upward of 75% travel, depending upon launch
• Ability to work independently without supervision
• ASE certifications
• Demonstrated presentation skills delivering process and technical training
• Automotive technical assistance center experience

Required Education:

• Associate's degree or Certificate in Automotive Technology, engineering or other related discipline
• High school diploma with eight years of experience as an automotive instructional designer, training developer, automotive instructor and/or manufacturing instructor may be considered in lieu of an associate’s degree

Company Description

Old Mission Ascend Partners (OMAP) empowers elite clinicians to build prosperity by providing an innovative "Business-in-a-Box" framework for launching and scaling Micro-MSOs. As the venture arm of the Old Mission ecosystem, OMAP removes the traditional barriers of launching a private practice by offering a vertically integrated support system. This includes clinical protocols, proprietary technology, lead generation, SEO assets, and access to top-tier regenerative biologics. With a mission to enable clinicians to own 100% of their practices and focus on care, OMAP drives the future of Sovereign Medicine with tools like seed funding and startup capital. Located in Traverse City, MI, OMAP is committed to providing the foundation for clinicians’ entrepreneurial success.

Managing Director | Old Mission Ascend Partners (OMAP)

Location: Traverse City, MI (Hybrid/Regional)

Experience: 7+ Years in Healthcare Business Development / MSO Management Background: Physician Assistant (PA) or Nurse Practitioner (NP) with Ortho or ER Experience

The "Un-Job" for the "Un-Clinician"

If you are looking for a comfortable, 9-to-5 clinical management role at a regional health system, close this tab now.

We are Old Mission Ascend Partners (OMAP), and we are built for the clinician who is tired of being a "line item" on a hospital's balance sheet. We have built the "Growth Engine for Independent Practice"; a Micro-MSO startup designed to liberate clinicians from the grind of a 'job'. We are looking for a Physician Assistant or Nurse Practitioner to serve as the Managing Director (Founder) of our Traverse City startup spoke.

This is a Leadership mandate. We need an Ortho-trained proceduralist or an ER clinician who is addicted to high-stakes execution, unfazed by the chaos of a startup, and ready to build a business unit from a blank sheet of paper.

The Mission: Founder & General

As the Managing Director, you are the "Founder" of this Spoke. You aren't just managing a clinic; you are launching a high-margin business unit. You will leverage the "Shared Services" of our Hub (Payroll, Logistics, Tech) to remain lean while scaling at speed.

• Build the Engine: Personally architect and execute the sales strategy to recruit independent clinicians into the OMAP ecosystem.
• Protocol Enforcement: Ensure every partner adheres to our clinical and operational blueprints to maintain ecosystem integrity.
• P&L Ownership: Maintain total responsibility for the OMAP bottom line, managing expenses and maximizing revenue.
• The 60/40 Rule: Drive the unit to hit specific revenue targets where 60% goes to the provider and 40% remains for Spoke OpEx and Hub Fees.

Who You Are (The DNA)

• The Clinical Pedigree: You are a PA or NP with deep roots in Orthopedics or Emergency Medicine. You understand procedural medicine, you make decisions in seconds, and you don't flinch under pressure.
• The Track Record: You have 7+ years in healthcare business development or medical group operations, with a proven history of managing a P&L of at least $5M+ TCV.
• Startup Soul: You aren't afraid of failure—you’re afraid of being average. You see "limitless potential" in building something that disrupts the legacy Fee-For-Service model.
• Radical Transparency: You lead with the data. You build trust through unvarnished, honest communication with partners and staff.

The Payoff (70/30 Profit Participation)

We don’t believe in salary caps for founders.

• Base Salary: $140,000
• The Profit Pool: Once the Spoke is profitable (covering all OpEx and Hub Fees), 70% of the remaining Net Profit goes into the Spoke Performance Pool.
• The Managing Director Share: You earn a 20% share of that 70% pool.
• The Traction Multiplier: Execute your "Rocks" at a 90%+ completion rate, and your payout is multiplied by 1.1x.
• The Upside: Annual variable compensation is uncapped, up to 100% of your Base Salary.

The Benefits

• Unlimited PTO: We measure profitability and outcomes, not "clock-in" time.
• Elite Coverage: 100% medical/dental/vision premiums for the employee; 50% for dependents.
• 401(k) Match: Up to 4% company match.
• Professional Development: A dedicated budget for entrepreneurial leadership and MSO training.

Do you have the stomach to build something from scratch in Traverse City? Apply Now.

Pay: $140,000.00 per year

Benefits:

• 401(k) matching
• Dental insurance
• Health insurance
• Paid time off
• Professional development assistance
• Vision insurance

Work Location: Prefer Traverse City, MI and open to Michigan and other states.