Engineering Structures Jobs in Washington Remote
785 positions found — Page 6
Numerical Control Programmer
Auburn, WA
6+ Months Contract
Primary Responsibilities
• Create, verify, and revise Machine Control Data (MCD), tooling geometry, and setup documentation for multi-axis CNC machines (primarily 5-axis).
• Interpret engineering drawings, planning documentation, and manufacturing requirements to develop robust NC programs for aluminum and hard-metal parts.
• Develop multiple setups and operations for complex part geometries, ensuring fixturing, tooling, and machine selection support producibility and tolerances.
• Produce clear setup sheets and operator instructions that enable consistent and safe machine operation.
• Use simulation/verification tools (e.g., Vericut) to validate programs and eliminate collisions or gouges prior to shop-floor execution.
• Troubleshoot and iterate programs based on first-article inspections, in-process feedback, and shop-floor testing.
• Coordinate with planning, manufacturing engineering, tooling design, and machine operators to optimize cycle times, reduce scrap, and address manufacturability concerns.
• For Level 4: Lead the design of custom fixtures and complex tooling arrangements and define machining strategies across multiple operations and machines.
• Maintain program documentation, revisions, and configuration control per company/contract requirements.
• Work under minimal direction.
Required Skills
• 7+ years of NC programming experience for production machining or equivalent combination of education and experience.
• Demonstrated experience programming 5-axis CNC machines for aerospace parts (aluminum and hard metals).
• Proficiency reading and interpreting engineering drawings, GD&T, and manufacturing documentation.
• Proficient in CATIA V5 NC programming.
• Proficient in NC simulation/verification tools such as Vericut.
• Ability to create clear setup documentation and operator instructions.
• Able to work 2nd shift schedule as specified.
• Contractor eligibility to work under the terms of the engagement.
Preferred Qualifications
• Prior experience creating custom fixtures and tooling for multi-setup machining operations
• Experience defining machining strategy and selecting appropriate machines and processes for part families.
• Familiarity with aerospace manufacturing processes, inspection practices, and first-article requirements.
• Strong problem-solving skills with a track record of reducing cycle times or improving producibility.
• Effective communicator with experience collaborating across planning, engineering, and shop-floor teams.
• Experience with additional CAM systems or post-processors commonly used in aerospace environments.
Education / Experience:
Education/experience typically acquired through advanced education (e.g. Associate) and typically 6 or more years' related work experience or an equivalent combination of education and experience (e.g. Bachelor+4 years' related work experience, 8 years' related work experience, etc.).
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft.
Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans.
In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics.
Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviationPosition ResponsibilitiesReview job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.Locate work areas using drawings and electronic resources that specify airplane and section numbers.Verify kitted parts against installation plans and bill of materials for accuracy and suitability.Determine and obtain the correct fasteners from PCA/MMO control per specifications.Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.Install and rework interior parts and assemblies, including carpets, stowbins, and seats.Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.Disassemble parts, deburr holes, and prepare surfaces for fastener installation.Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.Install fasteners in the correct sequence using appropriate tools, adhering to specifications.Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeCurrent Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.1+ years of experience using hand and power toolsAbility to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.Ability to use hazardous chemicals.Preferred Qualifications:1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.Typical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Drug Free WorkplaceBoeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shiftsTotal Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations. Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Apr.
15, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Tool & Die Maker to join our Materials Management & Tooling team in Auburn and Renton, Washingto n.
In this hands-on position, you will be responsible for a variety of tasks, from interpreting blueprints and work orders to developing effective plans for tool fabrication and repair.
Your skills will be essential in troubleshooting production challenges, operating advanced machinery, and ensuring that all tools meet stringent quality standards.
Collaborating with cross-functional teams, you will also engage with customers and suppliers to address any functional issues, all while adhering to safety protocols and continuous improvement practices.
If you are passionate about precision engineering and ready to make a significant impact in a fast-paced environment, we invite you to explore this exciting opportunity.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Perform all functions related to tool fabrication, rework, and repair as required.
Obtain work orders from the team leader or supervisor, determining assignments based on schedule dates and tool availability.
Read work orders and blueprints to identify required tasks, tools, and equipment.
Develop plans for the fabrication, maintenance, and repair of tools.
Initiate and coordinate engineering change requests with internal support groups when necessary.
Determine the sequence of tool fabrication work, troubleshoot issues, and develop solutions to production challenges.
Access and utilize appropriate tool drawings, models, and specifications using available computing systems.
Select and verify necessary equipment from the shop storage area, ensuring current tool certification.
Perform repairs or replacements on tools as per Standing Tool Order (STO) Production Requests, and request rework orders if necessary.
Layout holes, lines, and other tool features, and install or modify hydraulic, pneumatic, and vacuum tubes as required.
Operate various machinery, including power saws, drill presses, and CNC machines, to shape materials and prepare details.
Move materials and equipment using Powered Industrial Trucks (PIT) and overhead cranes as needed.
Maintain accurate records of orders and coordinate tooling information with other shifts and departments.
Handle hazardous materials in compliance with Boeing procedures, using appropriate personal protective equipment.
Engage in continuous improvement practices to enhance quality, safety, and efficiency in tool and die work.
Use precision measuring instruments, such as micrometers and gauges, to ensure accuracy in fabrication and repairs.
Interface with customers and suppliers to incorporate changes or resolve functional and installation issues.
Submit completed jobs to Quality Assurance and assist inspectors in performing necessary checks or measurements.
Utilize mathematics, including algebra and trigonometry, to calculate dimensions and analyze Model Based Definition (MBD) for fabrication details.
Conduct tool tryouts and make necessary adjustments to ensure production meets quality requirements and specifications.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications: 5 years of experience in repairing, maintaining, construction, and/or the inspection of tools, dies, jigs, powerfeed, etc.
5 years of experience in machine shop processes, geometric dimensioning & tolerances, and machining capabilities of different types of materials.
2 years of experience using complete set of toolmaker shop equipment (milling, lathe, precision, grinding, polishing, and fitting).
Preferred Qualifications: 5 years of experience as a Tool & Die Maker.
2 years of experience with hydraulics and pneumatics.
Completed an approved Mold Maker or Tool and Die Maker state apprentice ship program and/or certified by the U.S.
Ability to perform machining operations with a specified degree of accuracy and within a timely manner, maintain close and exacting tolerances and finish requirements ensuring highest quality workmanship on all tools, gages, and fixtures with minimal scrap.
Capable of creating a repeatable setup and working to tolerances of /-.0002" in controlled environment.
Possesses 4 and 5 axis CNC skills for mill or lathe, and extensive knowledge of detail cutting tool geometry for different cutting tool types and materials.
Ability to reverse engineer and manufacture mold components within time limitations Ability to read and write G and M code with CAM programming experience.
Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: This position offers relocation based on candidate eligibility.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $40.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Jul.
31, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Integral Fuel Cells to join our Quality team in Everett and Renton, Washington.
As an Inspector for Integral Fuel Cells, you will be crucial in maintaining the integrity and safety of our aircraft operations.
This position requires working in confined spaces within the wing fuel cells, where employees must crawl through an opening of 9.5” x 17.7" to access the fuel cell.
Your expertise will be vital in inspecting the cleaning, sealing, and coating processes, as well as conducting thorough leak checks to identify and resolve any issues.
Collaborating closely with Engineering, Quality, and Manufacturing teams, you will implement improvements in build processes and drive initiatives for defect reduction.
Certification for visual acuity and color perception may also be required.
Your ability to use precision measuring instruments and interpret technical documentation will ensure that all components meet stringent specifications, allowing you to make a significant impact on our operations.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.
Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.
Inspect final assemblies, subassemblies, and installations of parts and systems for workmanship, fit, alignment, and conformance with applicable drawings and specifications.
Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.
Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.
Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.
Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.
Perform in-process inspections, including checks for torque, sealant applications, and electrical bonding.
Document any discrepancies and report them to the appropriate personnel for resolution.
Verify that parts and assemblies have been properly cleaned and that sealants, primers, and finishes are applied per specifications.
Witness and document functional tests of aircraft components and systems to detect leaks.
Perform shakedown inspections on completed assemblies prior to customer acceptance, documenting any discrepancies.
Maintain personal and tool certifications, ensuring compliance with operational standards.
Assist and train other employees on inspection methods and procedures, providing guidance as needed.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs.
to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.62 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications: 2 years of experience as a Quality Inspector or in a related inspection role within a similar industry , such as, but not limited to, Aerospace and Manufacturing.
Ability to work in confined spaces (work within or pass through).
Entry diameter 9.5”X17.7”.
Ability to complete Fall Protection Training.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to use a respirator or have been respirator certified.
Proficiency in reading, writing, and speaking English.
Preferred Qualifications: Experience working with precision measuring tools.
Experience sealing Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement: This position is for a variety of shifts.
Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $27.32 /hour, with potential to earn up to $57.88 /hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Aug.
31, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Crane Maintenance Mechanic, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington.
As a crane maintenance mechanic, you will ensure the safety and efficient operation of our cranes, essential equipment for our manufacturing processes.
You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.
Position Responsibilities Inspect, maintain, repair, rebuild, retrofit, modify, assemble, disassemble, troubleshoot, analyze, diagnose, calibrate, adjust, and test mechanical systems and or subsystems of all types of cranes such as, but not limited to cab operated, radio controlled, jib type, pendant operated, etc.
Know, understand, and work in compliance with SHEA and other applicable codes and regulations for overhead cranes Coordinate and work with management, engineering, equipment vendors, and other organizations to analyze equipment design requirements and capabilities.
Use schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances.
Determine and/or develop methods where procedures may not be available.
Devise and make shop aids to facilitate work.
Operate and utilize mechanical, test equipment and test systems, precision devices in failure analysis, all forms of predictive/preventative technologies, as required on cranes.
Operate, use and maintain overhead maintenance work platforms Maintain, adjust, install and repair, hydraulic, pneumatic and electric brake system components on cranes and bridges as requires.
Inspect and maintain building runway rails and expansion joints.
Maintain mechanical crane and hoist systems including cables, chain, sheaves and hooks.
Perform the operational tests and load tests of cranes and bridges as required by Engineering, SHEA and other applicable codes and regulations.
Maintain logs, charts, and perform written and verbal tie-in records.
Prepare reports and schedules as required.
Work with and assist employees of other classifications as required.
Perform work in other classifications when incidental but necessary to the accomplishment of the assignment.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications 2 Years experience using schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances 2Years experience maintaining mechanical cranes and hoists systems including cables, chain sheaves and hooks.
This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.
Able to lift up to 35 pounds.
Preferred Qualifications: Experience inspecting and maintaining building runway rails and expansion joints.
Preference given to those with 2 years overhead crane experience.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for all shifts Total Rewards & Pay Transparency At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: 33.32 – 61.01 Applications for this position will be accepted until May.
29, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Location Details: Remote, United States
At GoDaddy the future of work looks different for each team. Some teams work in the office full-time; others have a hybrid arrangement (they work remotely some days and in the office some days) and some work entirely remotely.
This position may be a hybrid or fully remote position, as decided by your manager. If designated as hybrid, you'll divide your time between working remotely from your home and an office location, so you should live within commuting distance. If designated as remote, you'll be working remotely from your home and may occasionally visit a GoDaddy office to meet with your team for events or meetings. Your hiring manager can share more about this role's hybrid or remote designation.
This position is not eligible to be performed in Alaska, Mississippi, North Dakota, or the Virgin Islands.
GoDaddy is not currently considering candidates for this role in California, Seattle, or NYC.
What you'll get to do...
Define the Enterprise Integration & Partner Platform Strategy
- Lead the strategy and roadmap for GoDaddy Commerce's headless commerce APIs and partner SDKs that enable external software platforms to embed payments and commerce workflows.
- Develop a clear vision for who integrates with us, why, and how — prioritizing integrations that deliver high merchant and partner value aligned to our platform core competencies.
- Build and maintain a deep understanding of partner evaluation criteria, technical architecture, and enterprise buyer needs — positioning GoDaddy Commerce competitively alongside platforms like Stripe, Adyen, and Finix.
Champion Enterprise & ISV Partner Workflows
- Serve as the voice of enterprise software partners — from technical architects to product leaders — ensuring our APIs, documentation, and certification processes reflect the needs of real integration teams.
- Map and optimize end-to-end partner workflows: onboarding → certification → go-live → reporting → revenue share → compliance.
- Translate integration complexity (devices, stores, payment endpoints, invoicing, virtual terminals, headless POS) into scalable, configurable platform solutions.
Drive Payments & Commerce Platform Capabilities
- Partner with engineering to define APIs and services for payments, orders, catalog, inventory, customers, and sales channels that support both embedded and in-person commerce.
- Build support for advanced enterprise requirements including:
- Multi-entity and multi-location configuration
- Reporting and commissions APIs
- Activity and transaction tracking
- Risk and fraud scoring hooks
- Customer authentication and tokenization flows
- Reseller administrator portal
- Collaborate with Payments, Risk, and FinOps teams to ensure accurate settlement, reporting, and reconciliation across embedded payment flows.
Influence and Collaborate with Enterprise Clients
- Meet directly with enterprise partners and resellers to understand their technical and business integration needs, gather feedback, and guide co-development pilots and close sales.
- Partner with Business Development and Solutions Engineering to support partner evaluation cycles, ensuring APIs, sandbox tools, and documentation demonstrate enterprise-grade capability and reliability.
- Translate client conversations into actionable platform requirements, balancing enterprise flexibility with platform scalability.
Deliver Hypothesis-Driven Product Discovery
- Use experimentation and partner pilots to validate API features and developer experiences before scaling.
- Measure what matters: partner integration velocity, merchant attach and retention, API usage, revenue contribution, and partner NPS.
- Continuously iterate roadmap priorities based on adoption, partner satisfaction, and ecosystem performance.
Scale and Evangelize the Partner Platform
- Collaborate with GTM and Solution Engineering to create integration blueprints, API playbooks, and sandbox environments that reduce time-to-value for new partners.
- Define certification standards and reference architectures for recurring vertical use cases.
- Share insights and findings across GoDaddy Commerce to shape our long-term platform strategy for embedded commerce and payments.
Your experience should include...
- 8+ years of product management experience in platform, API, or payments products, with deep knowledge of payments architecture and commerce primitives.
- 2+ years of ISO 8583 financial messaging experience.
- Proven success embedding payments/commerce into enterprise ISV and middleware platforms with measurable adoption outcomes.
- Expert in headless and API-first product development, including API design tradeoffs, SDK usability, and developer enablement.
- Strong client-facing skills leading discovery, solution reviews, and executive briefings with enterprise partners.
- Track record of cross-functional influence across engineering, business development, operations, and compliance teams.
You might also have...
- Experience with platforms such as Stripe Connect, Adyen for Platforms, Finix, Square Developer Platform, or Shopify's Partner APIs.
We've got your back... We offer a range of total rewards that may include paid time off, retirement savings (e.g., 401k, pension schemes), bonus/incentive eligibility, equity grants, participation in our employee stock purchase plan, competitive health benefits, and other family-friendly benefits including parental leave. GoDaddy's benefits vary based on individual role and location and can be reviewed in more detail during the interview process.
We also embrace our diverse culture and offer a range of Employee Resource Groups (Culture). Have a side hustle? No problem. We love entrepreneurs! Most importantly, come as you are and make your own way.
About us... GoDaddy is empowering everyday entrepreneurs around the world by providing the help and tools to succeed online, making opportunity more inclusive for all. GoDaddy is the place people come to name their idea, build a professional website, attract customers, sell their products and services, and manage their work. Our mission is to give our customers the tools, insights, and people to transform their ideas and personal initiative into success. To learn more about the company, visit About Us.
At GoDaddy, we know diverse teams build better products—period. Our people and culture reflect and celebrate that sense of diversity and inclusion in ideas, experiences and perspectives. But we also know that's not enough to build true equity and belonging in our communities. That's why we prioritize integrating diversity, equity, inclusion and belonging principles into the core of how we work every day—focusing not only on our employee experience, but also our customer experience and operations. It's the best way to serve our mission of empowering entrepreneurs everywhere, and making opportunity more inclusive for all. To read more about these commitments, as well as our representation and pay equity data, check out our Diversity and Pay Parity annual report which can be found on our Diversity Careers page.
GoDaddy is proud to be an equal opportunity employer. GoDaddy will consider for employment qualified applicants with criminal histories in a manner consistent with local and federal requirements. Refer to our full EEO policy.
Our recruiting team is available to assist you in completing your application. If they could be helpful, please reach out to
Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.
GoDaddy doesn't accept unsolicited resumes from recruiters or employment agencies.
Remote working/work at home options are available for this role.
*Securian Financial Groups internal position title is Engineering Sr Analyst.
Position Summary:
Are you an experienced application developer passionate about creating impactful technology solutions? Securian Financial is seeking an Engineering Senior Analyst with 2-4 years of proven application development experience, specifically skilled in Java, Mainframe, and Informatica, to join our Life & Annuity Actuarial Systems Technology team. As a crucial member of our agile scrum team, you'll innovate, optimize data processing, and support critical actuarial systems, leveraging a diverse technology stack including AWS, Spring, SQL Server, and Oracle.
Responsibilities include but not limited to:
- Own critical business application support, promptly resolving complex production issues to ensure reliable and efficient operations.
- Drive modernization initiatives such as Application Rationalization and migration to AWS, significantly enhancing our systems' capabilities and performance.
- Become a subject matter expert in Individual Life and Annuity business processes, influencing strategic decisions and technical planning.
- Cultivate strong relationships with stakeholders and cross-functional teams, fostering collaboration and alignment.
- Lead and execute projects through detailed analysis, thoughtful design, robust development, rigorous testing, seamless integration, and successful implementation.
- Encourage innovation and creativity through a proactive test-and-learn approach, contributing actively to continuous improvement.
Qualifications:
- 2-5 years of proven professional experience in application development.
- Extensive experience (3+ years) in Java development, particularly using Spring and Spring Batch frameworks.
- Demonstrated ability to tackle and resolve complex technical challenges.
- Excellent communication and interpersonal skills, thriving in a collaborative team environment.
- Strong expertise in Mainframe systems and Informatica ETL tools.
Preferred Qualifications:
- Experience in system design and analysis.
- Expertise in Mainframe systems and Informatica ETL tools.
- Previous exposure to actuarial systems or financial services technology environments.
#LI-Hybrid **This position will have a hybrid working arrangement, working in-office for a minimum of 3 days a week.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
IDR is hiring for a 6 Month Contract to Hire Technical Product Owner
Join a leading organization in the data technology sector, where innovation and agility drive success. This fully remote role offers the opportunity to influence key data engineering initiatives, collaborating across diverse teams to deliver impactful digital products. If you're passionate about data solutions, thrive in fast-paced environments, and possess a strong technical acumen, this is your chance to make a difference and grow your career.
Position Overview for the Technical Product Owner:
• Act as a pivotal link between Data Engineering teams and business stakeholders to facilitate successful technology delivery across digital products
• Manage and prioritize data engineering product backlog, ensuring alignment with organizational objectives
• Author user stories and acceptance criteria, leading refinement sessions and sprint planning
• Lead Agile ceremonies including daily standups, sprint reviews, and retrospectives to ensure smooth delivery
• Utilize data and AI tools to analyze issues, optimize workflows, and maintain high quality in product artifacts
Requirements for the Technical Product Owner:
• Proven experience in stakeholder interaction and managing product backlogs in an Agile environment
• Strong documentation skills and the ability to communicate complex technical requirements effectively
• Proficiency with SQL, data engineering processes, and related technologies such as Azure SQL, Data Factory, SSIS, and Azure Data Lake
• Familiarity with Microsoft tech stack and data delivery tools is highly preferred
• Solid understanding of data engineering concepts and successful delivery of technical products
What's in it for you?
• Opportunity to work remotely with flexible hours, supporting a dynamic team that values innovation and autonomy
• Competitive pay rate of $60-68/hr, leading to an annualized salary of approximately $135,000 + 10% STIP
• Be part of a company with a strong focus on data-driven solutions and cutting-edge technology adoption
• Gain hands-on experience with AI-driven processes and advanced data engineering tools
Why IDR?
• 25+ Years of Proven Industry Experience in 4 major markets
• Employee Stock Ownership Program
• Dedicated Engagement Manager who is committed to you and your success
• Medical, Dental, Vision, and Life Insurance
• ClearlyRated's Best of Staffing Client and Talent Award winner 12 years in a row.
REMOTE
Remote working/work at home options are available for this role.
Machine Learning Engineer | Python | Pytorch | Distributed Training | Optimisation | GPU | Hybrid, San Jose, CA
Title: Machine Learning Engineer
Location: San Jose, CA
Responsibilities:
- Productize and optimize models from Research into reliable, performant, and cost-efficient services with clear SLOs (latency, availability, cost).
- Scale training across nodes/GPUs (DDP/FSDP/ZeRO, pipeline/tensor parallelism) and own throughput/time-to-train using profiling and optimization.
- Implement model-efficiency techniques (quantization, distillation, pruning, KV-cache, Flash Attention) for training and inference without materially degrading quality.
- Build and maintain model-serving systems (vLLM/Triton/TGI/ONNX/TensorRT/AITemplate) with batching, streaming, caching, and memory management.
- Integrate with vector/feature stores and data pipelines (FAISS/Milvus/Pinecone/pgvector; Parquet/Delta) as needed for production.
- Define and track performance and cost KPIs; run continuous improvement loops and capacity planning.
- Partner with ML Ops on CI/CD, telemetry/observability, model registries; partner with Scientists on reproducible handoffs and evaluations.
Educational Qualifications:
- Bachelors in computer science, Electrical/Computer Engineering, or a related field required; Master’s preferred (or equivalent industry experience).
- Strong systems/ML engineering with exposure to distributed training and inference optimization.
Industry Experience:
- 3–5 years in ML/AI engineering roles owning training and/or serving in production at scale.
- Demonstrated success delivering high-throughput, low-latency ML services with reliability and cost improvements.
- Experience collaborating across Research, Platform/Infra, Data, and Product functions.
Technical Skills:
- Familiarity with deep learning frameworks: PyTorch (primary), TensorFlow.
- Exposure to large model training techniques (DDP, FSDP, ZeRO, pipeline/tensor parallelism); distributed training experience a plus
- Optimization: experience profiling and optimizing code execution and model inference: (PTQ/QAT/AWQ/GPTQ), pruning, distillation, KV-cache optimization, Flash Attention
- Scalable serving: autoscaling, load balancing, streaming, batching, caching; collaboration with platform engineers.
- Data & storage: SQL/NoSQL, vector stores (FAISS/Milvus/Pinecone/pgvector), Parquet/Delta, object stores.
- Write performant, maintainable code
- Understanding of the full ML lifecycle: data collection, model training, deployment, inference, optimization, and evaluation.
Machine Learning Engineer | Python | Pytorch | Distributed Training | Optimisation | GPU | Hybrid, San Jose, CA
Remote working/work at home options are available for this role.
Readily Available Interim Customer Support Lead | VC-Backed B2B Healthtech SaaS | Boston (Hybrid)
The Client
This client is an AI-powered healthtech startup born out of a multi-year collaboration between leading academic medical centers and top-tier engineering institutions in Europe. This business has developed patented algorithms and a proprietary clinical database to help practitioners improve ultrasound screening accuracy, reduce diagnostic errors, and optimize care pathways for expectant mothers. With a clear mission to expand access to high-quality women's and children's health outcomes through technology, they are now scaling rapidly across the United States; partnering with major clinical networks and onboarding new health system clients at an accelerating pace.
The Role
This is an opportunity to own and build a support function at a company experiencing hypergrowth in the US market. Reporting to the Director of Operations, this role is for someone who sees a blank slate as an opportunity. The customer base is scaling rapidly and this position will be responsible for building the support function that grows with it. The right candidate will be hands-on, close to the product and customers before building out the systems, tooling, and team capable of sustaining growth without compromising the experience
Responsibilities
- Handle tickets and calls directly to build deep product knowledge and earn customer trust
- Design and implement the core support ticket infrastructure: SLAs, escalation paths, and cross-functional workflows with Engineering and Product
- Optimize the CRM/ticketing environment (automations, reporting, routing) and build out a self-serve knowledge base including FAQs and troubleshooting guides
- Serve as the voice of the customer, translating support patterns and user feedback into actionable product insights
- Define and track key operational KPIs and build automations to drive ongoing efficiency
- Champion team autonomy and maintain quality standards throughout a period of significant scale
What We Need to See (Essential)
- 3-5 years of B2B SaaS experience in Technical Support, Customer Support, or Operations
- Experience in implementing modern support/ticketing platforms (e.g. Zendesk, Pylon or similar)
- Proficiency in maintaining & utilizing ticketing CRMs
- Demonstrated ability to thrive in hypergrowth environments and build processes from zero
- Comfort working across time zones (specifically West Coast)
- Genuine alignment with the company's mission in women's and children's health
What We’d Like to See (Bonus)
- Experience in a healthcare or regulated SaaS environment
- Familiarity with building or scaling a support function at a Series A-C stage company
- Experience with CRM automation and reporting
Location: Hybrid
Package: $60-80 per hour
Duration: 4 months
Remote working/work at home options are available for this role.
